It's fairly common to have multiple, identical monitors plugged in. In
that case, it's preferable to run the monitor's preferred mode on each
output, rather than just matching the width & height and end up with
different timings or refresh rates.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The ABI changed in the previous series of changes, so bump the ABI version for
the next release.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This makes a difference on darwin (and apparently nowhere else)
https://www.gnu.org/s/libtool/manual/libtool.html#Modules-for-libltdl
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Automake:
"Be careful when selecting library components conditionally. Because building
an empty library is not portable, you should ensure that any library
always contains at least one object."
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
This API is apparently semi-deprecated even by XFree86 standards, and
there are only four drivers left using it. Let's start chopping it off.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is slightly draconian, but that API is just awful. In all but
one case in the callers it's used to get a map of some legacy VGA
memory, and it would be cleaner for the caller to just call
pci_device_map_legacy.
The sole exception is in the vesa driver, which uses it to avoid having
to look up which device the BAR belongs to. That's similarly trivial to
fix.
Having done that, Linux's PCI layer is now very small indeed.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
... instead of rolling our own, badly.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
It is kept around to help drivers through the API transition and will be
removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
pciaccess handles this now.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
If you haven't ported 2.6 to your architecture in the intervening seven
years, you can keep running older servers.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Per-domain I/O is now something drivers must manually request, and must
keep track of within their own state rather than in the ScrnInfoRec.
It's not really possible to split that into two steps without an
additional intermediate ABI break, so don't even try. Drivers that want
source compatibility should ifdef on the presence of xf86UnmapLegacyIO.
As a fringe benefit, domain-aware I/O is now OS-independent, relying
only on support in pciaccess. Simplify OS PCI setup to reflect this.
The IOADDRESS type is kept around to help drivers through the API
transition and will be removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
In fact, don't default to anything; drivers must explicitly say which
kind they want, and they are strongly encouraged to do MMIO if possible.
This is an ABI change in that drivers that don't will crash, but drivers
that are explicit will work with both old and new servers.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is really a vga-specific hack anyway. The only modern driver that
uses it is trident, but it's already loaded vgahw by the time it would
call xf86GetClocks.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
https://bugs.freedesktop.org/show_bug.cgi?id=29109
When configured with --disable-mitshm the symbols declared in shmint.h
do not exist. By guarding the include with '#ifdef MITSHM' these
symbols are skipped when generating sdksyms.c with --disable-mitshm.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
It was such an eyesore once rendered in html.
Now it looks like other authors.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Such version information is already written in the appropriate location
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 05284a03f9 missed fixing up
kdrive's use of the old non-opaque structure.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Driver may change screen pixmaps after page flipping that would then
make damage lose track of the root pixmap.
Using root window for shadow damages fixes the problem because
SetWindowPixmap is implemented in shadow code.
Signed-off-by: Pauli Nieminen <pauli.nieminen@linux.intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the driver can handle the crtc transform in hardware, it sets
crtc->driverIsPerformingTransform, which turns off both the shadow
layer and the cursor's position-transforming code. However, some
drivers actually do require the cursor position to still be
transformed in these cases. Move the cursor position transform into a
helper function that can be called by such drivers.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
If a driver can use hardware to handle the crtc transform, then
there's no need for the server's shadow layer to do it. Add a crtc
flag that lets the driver indicate that it is handling the transform.
If it's set, consider the transformed size of the screen but don't
actually enable the shadow layer. Also stop adjusting the cursor
image and position.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Use $(SHELL) to run it. Someone may want to build out of a source tree
in a filesystem with the noexec mount flag set.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This does not really handle hotplug (it's handled inside the kernel,
by the 'mux' devices), but uses the wscons console driver
configuration to figure out the keyboard layout and the list of
pointing devices found by the kernel.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
OpenBSD and NetBSD does not support syscons
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Tested-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Since OsInit closes stdin before the xfree86 DDX opens the
console, fstat on stdin will always fail, so it's safe to delete
code that attempts it.
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Tested-by: Matthieu Herrb <matthieu.herrb@laas.fr>
