It's fairly common to have multiple, identical monitors plugged in. In
that case, it's preferable to run the monitor's preferred mode on each
output, rather than just matching the width & height and end up with
different timings or refresh rates.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use fchmod() to change permissions of the lock file instead
of chmod(), thus avoid the race that can be exploited to set
a symbolic link to any file or directory in the system.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
use O_NOFOLLOW to open the existing lock file, so symbolic links
aren't followed, thus avoid revealing if it point to an existing
file.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The ABI changed in the previous series of changes, so bump the ABI version for
the next release.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Every module building against xorg-server does not *Require* pixman nor
libpciaccess. If such modules need pixman or pciaccess, they should be
depending on them directly rather than inheriting a dependency from
xorg-server. To do this, they should use PKG_CHECK_MODULES in configure.ac
to check for pixman-1 or pciaccess and include the apporpriate _LIBS variable
to the appropriate _LDFLAGS variable in Makefile.am
This also moves pixman-1 to Requires.private, so CPPFLAGS is set right to
to satisfy include dependencies but avoid linking needlessly.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
This removes the need to pass the following to configure on darwin:
--disable-pciaccess -disable-int10-module --disable-vbe --disable-vgahw --disable-libdrm
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This makes a difference on darwin (and apparently nowhere else)
https://www.gnu.org/s/libtool/manual/libtool.html#Modules-for-libltdl
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
No semantical changes. Just moved code around, grouping PCI related stuff in a
single chunk.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Automake:
"Be careful when selecting library components conditionally. Because building
an empty library is not portable, you should ensure that any library
always contains at least one object."
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
This API is apparently semi-deprecated even by XFree86 standards, and
there are only four drivers left using it. Let's start chopping it off.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is slightly draconian, but that API is just awful. In all but
one case in the callers it's used to get a map of some legacy VGA
memory, and it would be cleaner for the caller to just call
pci_device_map_legacy.
The sole exception is in the vesa driver, which uses it to avoid having
to look up which device the BAR belongs to. That's similarly trivial to
fix.
Having done that, Linux's PCI layer is now very small indeed.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
... instead of rolling our own, badly.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
It is kept around to help drivers through the API transition and will be
removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
pciaccess handles this now.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
If you haven't ported 2.6 to your architecture in the intervening seven
years, you can keep running older servers.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Per-domain I/O is now something drivers must manually request, and must
keep track of within their own state rather than in the ScrnInfoRec.
It's not really possible to split that into two steps without an
additional intermediate ABI break, so don't even try. Drivers that want
source compatibility should ifdef on the presence of xf86UnmapLegacyIO.
As a fringe benefit, domain-aware I/O is now OS-independent, relying
only on support in pciaccess. Simplify OS PCI setup to reflect this.
The IOADDRESS type is kept around to help drivers through the API
transition and will be removed at some point in the future.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
In fact, don't default to anything; drivers must explicitly say which
kind they want, and they are strongly encouraged to do MMIO if possible.
This is an ABI change in that drivers that don't will crash, but drivers
that are explicit will work with both old and new servers.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is really a vga-specific hack anyway. The only modern driver that
uses it is trident, but it's already loaded vgahw by the time it would
call xf86GetClocks.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The test was memsetting the wrong thing, this fixes make check in my tinderbox.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Co-authored-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Don't update the MD where it's not expected, positionSprite should really
just do that - position the sprite.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Don't switch between doubles and ints in the caller, instead take doubles in
miPointerSetPosition and do the conversion there. For full feature we should
change everything down from here for doubles too.
Functional change: previously we'd restore the remainder regardless of
screen switching/confinement (despite what the comment said). Now,
screen changing or cursor constraints will cause the remainder be clipped
off. This should happen for cursor constraints but arguably not for screen
crossing.
This also corrects a currently wrong comment about miPointerSetPosition's
input coordinates.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
miPointerSetPosition may switch screens. Always return the screen the sprite
is on instead of relying on callers to call miPointerGetScreen().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We can just get this in the function, no effective functional changes.
Also return the screen to the caller. Though we don't use it yet, we will in
a follow-up patch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
GPE unconditionally dereferences pDev->valuator if a mask is present. This
shouldn't really happen but if it does, don't crash, just ignore the events
with an error.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Let's be honest about what it does.
moveRelative accumulates delta _and_ clips in some cases, so that one can
keep it's name.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
https://bugs.freedesktop.org/show_bug.cgi?id=29109
When configured with --disable-mitshm the symbols declared in shmint.h
do not exist. By guarding the include with '#ifdef MITSHM' these
symbols are skipped when generating sdksyms.c with --disable-mitshm.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>