Reshuffle and reword - InputDevice sections are only necessary if
hotplugging is disabled. Put more emphasis on hotplugging and less on HAL
since we'll switch backends eventually.
CorePointer, CoreKeyboard, and AlwaysCore should be listed as deprecated
since they don't do what they used to since 1.4. These days, only
SendCoreEvents matters and it's enabled for any driver calling
xf86ProcessCommonOptions (== every driver).
It only controls the startup behavior too, so document this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Calls RegisterResourceName to record the type name for
use by X-Resource, XACE/SELinux/XTsol, and DTrace.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Make sure to check return value before setting bitmask flags.
For most calls, just fails to init the extension. Since Xinput
already calls FatalError() on initialization failure, so does
failure to allocate Xinput's resource type.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
SpecialKeyHandling was removed from the kbd driver with version 1.4.0. Since
this is the only version that will build against server 1.7+ it's not
reasonable to mention it in the man page. Reword, point to XKB instead and
make clear that some key combinations _may_ not be available in any given
config.
Reported-by: Derek Fawcus
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
1.7 always shipped with DontZap disabled, it's just the default keymaps that
may not include the symbol to trigger it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Most of the Xv Put/Get operations have an off by one error in the
viewport clipping.
Apparently PutImage was fixed at some point but the same code was
already copy-pasted all over the place, and so the other operations
still suffer from the bug.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
On Fri, Dec 11, 2009 at 10:19:01AM -0800, Keith Packard wrote:
> On Wed, 9 Dec 2009 11:55:14 +1000, Peter Hutterer <peter.hutterer@who-t.net> wrote:
> > On Tue, Dec 08, 2009 at 05:24:06PM -0800, Aaron Plattner wrote:
> > > On Tue, Dec 08, 2009 at 03:52:27PM -0800, Peter Hutterer wrote:
> > > > Xorg +xinerama crashes immediately due to whacky dependency between Xinerama
> > > > and RandR12. The latter doesn't initialize if Xinerama is enabled, but if
> > > > only one screen is found, Xinerama is disabled again and RandR12 tries to
> > > > access data it never initialized.
>
> I'd sure like to have RandR get enabled when xinerama doesn't; is there
> an easy way of making that happen here? Perhaps having the RandR12 code
> disable Xinerama when only one screen is found? Or some other kludge?
you know the dependency better than I do so any hints are apreciated.
afaict, the screenInfo.numScreens (the check used by Xinerama) isn't
necessarily initialized at this point so we can't use the same check.
The following seems to work though:
From 670b3ebdb7312a6433a8f093d0820785db2aea20 Mon Sep 17 00:00:00 2001
From: Peter Hutterer <peter.hutterer@who-t.net>
Date: Mon, 14 Dec 2009 11:00:58 +1000
Subject: [PATCH] xfree86: if only one screen was found, disable Xinerama (#24627)
Xorg +xinerama crashes immediately due to whacky dependency between Xinerama
and RandR12. The latter doesn't initialize if Xinerama is enabled, but if
only one screen is found, Xinerama is disabled again and RandR12 tries to
access data it never initialized.
Dependency chain is:
- ProcessCommandLine sets noPanoramiXExtension to FALSE
- xf86RandR12Init() is a noop
- PanoramiXExtensionInit sets noPanoramiXExtension to TRUE
- xf86RandR12CreateScreenResources tries to use the devPrivates key it never
initialized.
This hack checks if there's only one screen at the time RandR12 is
initialized. If so, we expect Xinerama to fail anyhow so we disable it
ourselves and proceed as planned.
X.Org Bug 24627 <http://bugs.freedesktop.org/show_bug.cgi?id=24627>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously it was trying to set the same value as the default one. Sigh.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Technically, disabling AEI is the right suggestion. AEI off forces the
server to init the built-in defaults for input devices (or pick the first
one from the config file). At the same time, hotplugging is still available
with AEI off.
Unfortunatly, in the vast majority of cases users want to simply disable
hotplugging or have a working server while the local HAL configuration is
broken or missing. Disabling AEI will lead to duplicate events, triple
keystrokes, etc. once the configuration works again.
It's not actually required to remove AEI once hotplugging works again,
though it will in many cases lead to a setup that appears broken.
Asking users to disable AutoAddDevices instead means those users disable
hotplugging, can then fix the HAL setup and they _must_ remove the config
line again to test if hotplugging works again. Which doesn't leave them with
a broken config once everything is working nice and dandy. Less bugreports,
everybody wins.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: James Cloos <cloos@jhcloos.com>
Should probably also be applied to stabler xserver branches too.
Luc Verhaegen.
From a22bc20721bad506d8fa9772b1258568cbffe7d2 Mon Sep 17 00:00:00 2001
From: Luc Verhaegen <libv@skynet.be>
Date: Wed, 11 Nov 2009 15:52:39 +0100
Subject: [PATCH] Xv: Fix AdjustFrame when driver implements ReputImage.
Finally fixes fd.o #4653, filed more than 4 years ago.
Patch can be happily applied to all modular Xorg versions.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
v1->v2: Make one condition case for one quirk instead of merging them
together. This is based on the Keithp's suggestion.
Move the EDID quirk for Philips LCD LP154W01 as the panel reports the vertical
size in cm.
https://bugs.freedesktop.org/show_bug.cgi?id=24482
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xorg creates its log file following the umask of the user running
startx, which may result in a world-writable log. Set umask to 022 to
prevent this.
Debian bug#555308 <http://bugs.debian.org/555308>
See also http://thread.gmane.org/gmane.comp.security.oss.general/2299
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's let glibc do the right thing for dense/sparse selection.
The _alpha_iobase code has been unused since the switch to libpciaccess. It
really should have been killed by fba700f1f6.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The event fd may be invalidated by the pInfo->read_input call. If it is
invalidated, the subsequent FD_CLR call will segfault. Thus, the FD_CLR
call must precede the pInfo->read_input call.
Signed-off-by: Chase Douglas <chasedouglas@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
FindModuleInSubdir seems to expect a / at the end of the subdir its
finding for, so we add the / early, the stat will fail if its
not a subdir, I'm leaving the S_ISDIR in just in case there is another
reason it could return 0. This does look a bit silly in strace
but it seems to work fine.
I have a very intermittent issue where drivers loses its / that
I've been seeing on/off for a while, this may or may not fix it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
I couldn't find any version of the X xserver that ever used lnx_font.c
so let's delete it. I tried contacting its author, Egbert, multiple
times on IRC and email [*] but never got any response. It also hasn't
been seriously touched since January 2005.
[*] http://lists.x.org/archives/xorg-devel/2009-October/002855.html
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Favorite deleted line was definitely
/* to cope with broken egcs-1.1.2 :-(((( */
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously DLOPEN_LIBS was managed in top-level configure.ac.
Instead bundle it with the code using dl*() functions to
avoid breakages in uncommon configurations.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
- Don't warn for references to deprecated functions in xorg_symbols.
- Ignore functions generated by gl_apitemp.py that are never used.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Existing video drivers will get the console enabled by default.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The message ending up in the log is misleading as to what the quirk
actually does: It ignores the sizes in the detailed timings and
replaces them with the display "Max Image Size".
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This was initially fixed by commit 3932a84857
but then (presumably not intentionally) undone by commit
1d54479cb3 .
Signed-off-by: Hans Nieser <hnsr@xs4all.nl>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
* mattst88/master:
[alpha] assume we have __NR_pciconfig_iobase
[alpha] don't return from void functions
Fix undefined symbols on alpha
Fix breakage on alpha caused by c7680befe5
Revert "alpha: kill xf86SlowBCopyToBus and xf86SlowBCopyFromBus"
The code path if we didn't have support has been broken since before we
switched to git.
The pciconfig_iobase syscall has been supported since 2000.
Signed-off-by: Matt Turner <mattst88@gmail.com>
On 64-bit systems, int and pointers don't have the same size, so GCC gives
warnings about casts between int and pointer types. However, in the cases
covered by this patch, it's always a value that fits in int being stored
temporarily as a pointer and then converted back later, which is safe.
Casting through the pointer-sized integer type intptr_t convinces the
compiler that this is OK.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
When testing if an fd is valid, the required construct is >= 0, not > 0.
[Daniel: Fixed up the Linux MTRR case as well.]
Signed-off-by: Martin Ettl <ettl.martin@gmx.de>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Replaces special handling for Xquartz DDX and scales better to handling
the multiple platforms that now have some level of Dtrace support available.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
All input drivers use xf86PostKeyEventP indirectly now and have been since
it exists. I guess that qualifies it as tested - no need to spam the logs.
Reported-by: Felix Wenk
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Pinpointed by by Michael Cree.
Commit c7680befe5 removed Jensen support, but at the same time broke
support for dense memory systems.
Signed-off-by: Matt Turner <mattst88@gmail.com>
The vesa driver still uses slowbcopy_frombus and slowbcopy_tobus.
This reverts commit 5ef53a94ce.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All input drivers use xf86PostKeyEventP indirectly now and have been since
it exists. I guess that qualifies it as tested - no need to spam the logs.
Reported-by: Felix Wenk
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Keith has shown half the block handlers wrappers are wrong, also
dynamic wrapping/unwrapping from what I can see will happen after
the drivers, so its really accidental ABI, that we can't change
now without modifing drivers. So be safe for 1.7.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Declared-as-sane-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Removing DGA ended up breaking any drivers calling into the old
xf86DiDGAInit function as it tried to see if DGA was already enabled
and ended up crashing if the VT wasn't completely initialized. Oops.
Also, if the driver initializes DGA itself, have the DiDGA
initialization overwrite that information as the DiDGA code will call
ReInit on mode detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If either width or height of DisplaySize is invalid, assume that the
configuration is invalid and use the DDC-reported values instead.
See Comment 9, Bug 9758.
http://bugs.freedesktop.org/show_bug.cgi?id=9758#c9
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dave Airlie <airlied@redhat.com>
I hadn't paid attention that the parameters order had changed, here is a
trivial patch, please apply.
Signed-off-by: Julien Cristau <jcristau@debian.org>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
This removes all rendering and mapping code from xf86DiDGA, leaving
just mode setting and raw input device access. The mapping code didn't
have the offset within /dev/mem for the frame buffer and the pixmap
support assumed that the framebuffer was never reallocated.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The adjusted mode was freed, but any name allocated for that was leaked.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The DIX event queue is allocated before InitInput is called, so fetch
the pointer there and not randomly at other times. This avoids failing
to fetch the pointer sometimes during server regen and then smashing
memory through the stale pointer from the previous server generation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86MatchDevice returned malloc'd storage containing the list of
devices to look at; make sure that gets freed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86LoaderCheckSymbol() is never useful if using externed variable directly.
noPanoramiXExtension will be just used through dlopen() like other extension modules.
Signed-off-by: Shunichi Fuji <palglowr@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Clears warnings about obsolete headers, but raises minimum
required version of xf86driproto to 2.1.0
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
49b93df8a3 made the hard dependency on
a "fixed" font go away but only Xorg could use the built-ins fonts by
default.
With this commit, all DDXs get "built-ins" appended to their FontPath, not
just Xorg.
Tested with Xorg, Xvfb and Xnest.
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
AllowMouseOpenFail description changed to reflect actual behaviour
and point to AllowEmptyInput for previously described behaviour.
Update default DPMS mode timeouts to match new defaults set
in April 2009 by commit d52fddefae
Update autoloaded module list to match ModuleDefaults in xf86Config.c
Update module subdir list to match stdSubdirs in loadmod.c
Add xorg.conf options that were added to the code:
- XkbDir option added in February 2009
by commit 76f18b94bd
- DRI2 option added in April 2008
by 35982bc109
Remove xorg.conf options that were removed from the code:
- XkbDisable option was removed in January 2009
by commit 40877c6680
- PciProbe/Config options were removed in August 2008
by commit fdf7c747a8
- EstimateSizesAggressively was removed in August 2008
by commit cd1e8f2614
- loadable font modules were removed in July 2008
by commit affec10635
- ModInDev options were removed in December 2008
by commit 6de6ffff35
(Also strips some trailing whitespaces to make git happier.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Move misplaced } to get the flow of
if (!ShareVTs) {
VT_ACTIVATE
VT_WAITACTIVE
}
X.Org Bug 11477 <http://bugs.freedesktop.org/show_bug.cgi?id=11477>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
So far there are no apparently issues on not closing the fd. But let's do the
right job here.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Apparently the kernel can't decide on an API to expose to userspace, so
let's just try both in the hope that one will work.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Michel Dänzer <michel@daenzer.net>
In practice, some of the native drivers for older Geode products
have become deprecated due to lack of e.g. libpciaccess upgrade,
but that's OK, since most distributions don't ship them anymore.
In that case, we'll let X server fall back to good old VESA.
Leave consoleFd open over the course of the server, even though any use
of it in this context is likely to be disastrous.
Signed-off-by: Michael Witrant <mike@lepton.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86SlowBCopyToBus and xf86SlowBCopyFromBus cause segfaults on my
system.
Also remove associated slowbcopy_tobus/slowbcopy_frombus macros.
Signed-off-by: Matt Turner <mattst88@gmail.com>
BUSmemcpy.c provides xf86BusToMem and xf86MemToBus, which are are memcpy
wrappers written to avoid glibc's memcpy on Alpha. glibc'c memcpy on
Alpha has improved much since this was written, so it's no longer
needed. Neither function is used inside the xserver, and no module on
my machine uses either as well.
Signed-off-by: Matt Turner <mattst88@gmail.com>
All architectures should be able to use the same unaligned access code,
regardless of whether they need special unaligned access instructions.
Let's let gcc do the heavy lifting.
In the case that we're not using a gcc-compatible compiler, use memmove.
The xserver already requires pixman, so include pixman.h for its uint*_t
types.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Checks for __GNUC__ are superfluous since the only other compiler for
the platform is Compaq C, and it doesn't support GCC style inline
assembly.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Referencing a screen through a drawable only requires GetAttr access.
Treat dri2 drawables as child windows (Add/Remove access).
Treat getting buffers as intent to read/write the drawable.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
The spec says x870, but we actually use x864 because that's a real DMT
mode and x870 isn't. This might or might not be wrong, but we should at
least tell the truth.
This adds support for using the libpciaccess interface for
vga arbitration support on top of a kernel which supports it.
Currently patches are queued for kernel 2.6.32 in jbarnes
pci tree, and shipping in Fedora kernel.
Co-authors:
Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This function was used as the default motion event queue API until
including XINPUT_ABI 2 (server 1.5).
This API was broken with 1883485 in May 2008 (wrong casting of parameters)
and isn't in use by input drivers past ABI 3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The smart scheduler is designed to minimize scheduler overhead by
increasing the interval between WaitForSomething calls when a single
client is running. However, the software rotation code depends on
its BlockHandler being invoked for screen updates; the long delays
caused by the smart scheduler optimizations means that screen updates
can be delayed a long time as well.
The change is simple -- prevent the smart scheduler from increasing
the scheduling interval while any screen is using software rotation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The rotation block handler uses regular driver rendering functions to
repaint the screen, if those functions queue commands in the driver,
it's important that the driver block handler be invoked after the
rotated image is drawn.
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86_reload_cursors restores the cursor to the correct position, but
that must adjust for cursor hot spot and frame before calling down to
the hardware function, otherwise the cursor jumps to the wrong
position until it is repositioned by the user.
Signed-off-by: Keith Packard <keithp@keithp.com>
No one is using bus notifications now. We hope that the kernel take care of
this properly.
For other not-so-urgent-notifications (ACPI wakeups, etc) we can just register
a handler on server's scheduler (using xf86AddGeneralHandler). And for
external applications, the "trend" is to use HAL to kick notifications. So
we're already provided of enough notification schemes.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
commit 48ee555833 (OpenSolaris VT support)
broke the autoconfiguration code in xf86AutoConfig.c that uses the
Solaris-specific VIS_GETIDENTIFIER ioctl on a frame buffer device like
/dev/fb by changing xf86Info.consoleFd from /dev/fb to a /dev/vt/*
device.
This fixes it by reworking the code to split the console device
(/dev/vt/*, the vtXX CLI option) from the frame buffer device
(/dev/fb, -dev option) to allow both VT and autoconfig to work.
It also fixes the console device to use /dev/fb when VT's are not
supported instead of throwing a Fatal Error because it can't open
/dev/vt/0.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
In non-setuid root installations, we shouldn't try to adjust VT/tty
ownership. It will fail, and shouldn't be necessary anyway (since
startup scripts or PAM should be handling perms for us in that case).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The xorg.conf generator was not assigning correctly the primary device
("bootable") as screen zero. So just skip this kind of routines for now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
If you want to run a pre-1999 kernel, you'll need a pre-2009 X server
[Some pre-Solaris 8 VT support is left by this patch to allow reuse by
the new Solaris VT support that follows in the next patch.]
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
