OsInitColors always just returned TRUE, so just remove calls to it and
insane special-case logic. Remove unused kcolor.c implementation, and
merge oscolor.h into oscolor.c since it was the only user. Remove
open-coded strncasecmp in oscolor.c.
Since we no longer need to call OsInitColors after reading the config
file, just call PostConfigInit() from one place, and move PM handling to
one place so we can install the signal handlers earlier.
If devices are prepended to the list, their wake-up order on resume is not the
same as the original initialisation order. Hot-plugged devices, originally
inited last, are re-enabled before the xorg.conf devices and in some cases may
steal the device files. Result: we have different devices before and after
suspend/resume.
RedHat Bug 439386 <https://bugzilla.redhat.com/show_bug.cgi?id=439386>
- Allow returning multiple drivers to try for a given PCI id (for instance,
try "geode" then "amd" for AMD Geode hardware)
- On Solaris, use VIS_GETIDENTIFIER ioctl as well as PCI id to choose drivers
- Use wsfb instead of fbdev as a fallback on non-Linux SPARC platforms
Remove AEI check from configImpliedLayout as the setting isn't actually parsed
at this point anyway (written by Sasha Hlusiak).
Resurrect checkInput() and check for devices there if AEI is false (this also
creates the default devices if required).
Set AllowEmptyInput to enabled by default if hotplugging is enabled.
If no Screen is specified in the ServerLayout section, either take the first
one from the config file or autogenerate a default screen.
X.Org Bug 16301 <http://bugs.freedesktop.org/show_bug.cgi?id=16301>
RandR 1.1 has a physical size for each mode. It used to be that the DIX would
remember these modes and pass them back up to the DDX when changing the screen
configuration. The DDX uses RR_GET_MODE_MM to query the driver for the physical
dimensions of the screen, allowing it to preserve the DPI.
With RandR 1.2, the physical dimensions are stored as part of the output, rather
than per mode. The DIX only uses the sizes passed in from the DDX to select the
mode pool for the "default" output, and forgets the physical sizes. Then, when
reconfiguring the screen, it makes up a new RRScreenSizeRec using the dimensions
from the output, screwing up the DPI.
This change works around this problem by ignoring the DIX and querying the real
size from the driver.
This reverts commit 76576c87b0.
which was an incorrect revert of previous ABI bumps. Those
responsible for the accidental ABI bumps in both directions
have all been sacked.
This allows xf86-input-mouse to build again, for example.
Spiritual revert of 1fa4de80fc. Intel's C
compiler claims to be gcc-compatible; if they're not defining the same
macros as gcc then that's their bug, not ours. Even if we were to do
this aliasing we should do it once and for all in servermd.h.
The problem happens if Monitor/Card combo doesn't provide EDID info,
and the XFree86-VidModeExtension extension is used.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
Missing parameter caused event processing to go nuts when checking valuators.
X.Org Bug 15936 <http://bugs.freedesktop.org/show_bug.cgi?id=15936>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
In DeleteInputDeviceRequest, leave the conf_idev (which is shared with
xf86ConfigLayout.input) alone for devices that were specified in the
ServerLayout section of the config file. This way, in the next server
generation we are left with what was the original config and can thus re-init
the devices.
This is an addon to 6d22a9615a, an attempt to
fix Bug 14418.
X.Org Bug 15645 <https://bugs.freedesktop.org/show_bug.cgi?id=15645>
X.Org Bug 14418 <https://bugs.freedesktop.org/show_bug.cgi?id=15645>
The previous check works in the master-branch, but doesn't work with MPX. We
actually copy the SD's information into the MDs public.devicePrivate, so we
need to explicitly check whether a device is a MD before freeing the module.
The DDX (xfree86 anyway) maintains its own device list in addition to the one
in the DIX. CloseDevice will only remove it from the DIX, not the DDX. If the
server then restarts (last client disconnects), the DDX devices are still
there, will be re-initialised, then the hal devices come in and are added too.
This repeats until we run out of device ids.
This also requires us to strdup() the default pointer/keyboard in
checkCoreInputDevices.
X.Org Bug 14418 <http://bugs.freedesktop.org/show_bug.cgi?id=14418>
Some pointer devices send key events [1], blindly getting the paired device
crashes the server. So let's check if the device is a pointer before we try to
get the paired device.
[1] The MS Wireless Optical Desktop 2000's multimedia keys are sent through
the pointer device, not through the keyboard device.
Get rid of glcontextmodes.[ch] from build, rename __GlcontextModes to
__GLXcontext. Drop all #includes of glcontextmodes.h and glcore.h.
Drop the DRI context modes extension.
Add protocol code to DRI2 module and load DRI2 extension by default.
i.e., don't check for the end of the list by ->name == NULL, since that
won't work now. Fix the consumers of xf86DefaultModes to use the new
explicit size as well.
FindPCIVideoInfo() function isn't need anymore.
xf86scanpci() is being called only once so we don't need permanent
(static) variables there.
restorePciState() is not used for now (until we find why multiple
cards aren't working).
This reverts commit 3abce3ea2b and
6cbaf15e61.
The memory returned to xf86LoadModule was allocated in doLoadModule, which
calls the respective module's PreInit. As it turns out, input and output
drivers store a pointer to the module elswhere, so freeing it in
xf86LoadModule is a bad idea.
For further reference: hw/xfree86/common/xf86Helper.c
Input drivers: xf86InputDriverList[blah]->module = module;
Output drivers: xf86DriverList[blah]->module = module;
Unloading the module would not look pretty then.
Rather than letting the DDX allocate the events, allocate them once in the DIX
and just pass it around when needed.
DDX should call GetEventList() to obtain this list and then pass it into
Get{Pointer|Keyboard}Events.
LoadModule() returns the only reference to a fresh piece of memory (a
ModuleDescPtr). Sadly, xf86LoadModules dropped the return value on the floor
leaking memory for each module it loaded.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
xf86LogInit allocates a piece of memory, stores it in lf. LogInit() will then
effectively strdup it, but lf is never freed again.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
It's out of date and not included in the build. Instead, xf86DefModeSet.c is
built from vesamodes and extramodes using modeline2c.awk and *that's* what gets
built.
From bugzilla bug 13467¹:
Currently the xserver fails to build without this (now deleted) file, as the
Makefile tries to distribute it. The patch simply removes the reference to
modeline2c.pl.
1] http://bugs.freedesktop.org/show_bug.cgi?id=13467
Signed-off-by: James Cloos <cloos@jhcloos.com>
From bugzilla bug 13467¹:
The modeline2c script is the only part of the Xorg server that requires Perl.
[This] is a simpler replacement that works with any normal AWK.
1] http://bugs.freedesktop.org/show_bug.cgi?id=13467
Bug was posted by Joerg Sonnenberger <joerg@NetBSD.org>.
We free the ValuatorClassRec quite regularly. If a SIGIO is handled while
we're swapping device classes, we can bring the server down when we try to
access lastx/lasty of the master device.
These hints allow an acceleration architecture to optimize allocation of certain
types of pixmaps, such as pixmaps that will serve as backing pixmaps for
redirected windows.
In a multihead setup, if only the first screen can be
initialized, but the second screen is mentioned first in the
ServerLayout section, the xf86InitOrigins() function will crash
because the screen referred to in the e.g. "RightOf" part is
non-existent.
This makes the root visual a GLX capable visual again and adds a GLX visual
for the COMPOSITE ARGB visual cleanly (as opposed to the hack we had before).
Call ProcessOtherEvents first, then for all keyboard devices let them be
wrapped by XKB. This way all XI events will go through XKB.
Note that the VCK is still not wrapped, so core events will bypass XKB.
(cherry picked from commit d627061b48)
Hide getline call by checking for glibc. If not, use fgetln instead. Even
though this section is now #ifdef'ed for linux only, this should help make
it more portable if non-linux folks end up wanting it.
It contains static paths, fails to build on non-glibc, and apparently just
exists to support distributions managing binary drivers and open-source drivers
together. Also restores previous code for fallback to vesa if nothing is
detected.
Right now we default to "all" which gives us a situation much like before,
but when the "typical" option is implemented, we can change the default and
reduce the number of visuals the GLX module bloats the X server with.
If none is present, a default one will be created. This will be attached
to either the first device section in the xorg.conf (allowing you to
specify something like using EXA without having a screen section) or a
default screen section if none is present in the file.
This will allow the screen to not explicitly have a device section. If
this is the case and there is a device section in the xorg.conf, the first
one will be used. If there is no device section at all, a default one will
be created that loads the automatically determined module.
This is what we're currently shipping in Debian. Enables the ability for
drivers to ship a text file listing PCI ID's they support, and have the
server read them on startup when no driver is specified. This works, but
isn't the final solution.
DGAStealXXXEvent modified to take in device argument.
The evdev driver only sends one valuator when only one axis changed. We need
to check for DGA either way (xf86PostMotionEventP), otherwise we lose purely
horizontal/vertical movements.
Note that DGA does not do XI events.
Center the frame around the first pointer found and then update all pointers
on the same screen to move to the edges (if necessary).
Note: xf86WarpCursor needs to be modified, is using deprecated
miPointerWarpCursor and will kill the server when called with
inputInfo.pointer.
When processing events from the EQ, _always_ call the processInputProc of the
matching device. For XI devices, this proc is wrapped in three layers.
Core event handling is wrapped by XI event handling, which is wrapped by XKB.
A core event now passes through XKB -> XI -> DIX.
This gets rid of a sync'd grab problem: with the previous code, core events
did disappear during a sync'd device grab on account of mieqProcessInputEvents
calling the processInputProc of the VCP/VCK instead of the actual device. This
lead to the event being processed as normal instead of being enqueued for
later replaying.
Call ProcessOtherEvents first, then for all keyboard devices let them be
wrapped by XKB. This way all XI events will go through XKB.
Note that the VCK is still not wrapped, so core events will bypass XKB.
Add keyc->postdown, which represents the key state as of the last mieqEnqueue
call, and use it when we need to know the posted state, instead of the
processed state (keyc->down). Add small functions to getevents.c to query and
modify key state in postdown and use them all through, eliminating previously
broken uses.
In commit 41bb9fce47, the event delivery loop
for Xinput enabled keyboards was changed and accidentally used the wrong
index variable, causing random events to be delivered when returning from VT
switch.
In addition, in commit aeba855b07,
SIGIO was blocked during delivery of these events, but not for the entire
period the xf86Events array was being used. Block SIGIO for the whole loop
to avoid other event delivery from trashing the key release events.
(cherry picked from commit aa7ed1f5f3)
Previously, the server version reported by xdpyinfo and Xorg -version would
bear some vague resemblance to a X.Org katamari version, but in the presence
of modularization (and client-server relationships with different katamari
versions on each side) those numbers don't really make sense. Instead, just
report the package version.
When branching a stable branch, master's version should be immediately updated
to the endpoint of the stable branch plus a snapshot of 1 (for example,
1.4.0.1 after server-1.4-branch). The stable branch should then be changed to
RC0 at that time (1.3.99.0, for example).
This scheme was partially attempted for server 1.3, but lacked the appropriate
master updates, thus why it had to be revisited now. While here, we can also
remove a lot of versioning complexity since everything is based on the package
version.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
This was a bunch of poorly defined resource ranges per OS/platform combination
which were supposed to represent what regions could potentially have resources
allocated into them.
Composite's automatic redirection is a more general mechanism than the
ad-hoc BS machinery, so it's much prettier to implement the one in terms
of the other. Composite now wraps ChangeWindowAttributes and activates
automatic redirection for windows with backing store requested. The old
backing store infrastructure is completely gutted: ABI-visible structures
retain the function pointers, but they never get called, and all the
open-coded conditionals throughout the DIX layer to implement BS are gone.
Note that this is still not a strictly complete implementation of backing
store, since Composite will throw the bits away on unmap and therefore
WhenMapped and Always hints are equivalent.
This is where they should have been in the first place. All the rest of
the code in the server defines such things in the source files, not the
headers.
If NoAutoAddDevices is given as a server flag, then no devices will be added
from HAL events at all. If NoAutoEnableDevices is given, then the devices will
be added (and the DevicePresenceNotify sent), but not enabled, thus leaving
policy up to the client.
Make sure the font path is always 'built-ins' when we use built-in fonts,
rather than having it as a fixed path for a while, then clobbering it
halfway through startup.
If your loader is as bad as elfloader, then it makes sense for the
server to have some stubs for you to assign to / break on. However it
is no longer 1996.
I made a mistake in some new code using MakeAtom, passing the size of the
string instead of the length of the string. Figuring there might be other
such mistakes, I reviewed the server code and found four bugs of the same
form.
When the root window changed size, xf86XVFillKeyHelper would not revalidate
the GC, leaving the clip at the old size causing lossage (and possibly
memory corruption if the screen and frame buffer shrank).
Fixed by just using a scratch GC; saving memory, eliminating bugs and
shrinking the code.
When the modules section is parsed, if a module is set to be loaded by
default, this will be logged. If it is redundantly specified in xorg.conf,
this will also be noted. None of this logging will happen if the xorg.conf
lacks a modules section.
This provides a new option, UseDefaultFontPath. This option is enabled by
default, and causes the X server to always append the default font path
(defined at compile time) to the font path for the server. This will allow
people to specify additional font paths if they want without breaking
their font path, thus hopefully avoiding ye olde "fixed front" problem.
Because this option is a ServerFlag option, the ServerFlags need to be
processed before the files section of the config file, so swap the order
that they are processed.
Provide default modules that may be overrided easily. Previously the
server would load a set of default modules, but only if none were
specified in the xorg.conf, or if you didn't have a xorg.conf at all. This
patch provides a default set and you can add only the "Load" instructions
to xorg.conf that you want without losing the defaults. Similarly, if you
don't want to load a module that's loaded by default, you can add "Disable
modulename" to your xorg.conf (see man xorg.conf in this release for
details). This allows for a minimal "Modules" section, where the user only
need specify what they want to be different. See bug #10541 for more.
The list of default modules is taken from the set loaded by default when
there was a xorg.conf containing no "Modules" section.
A potential problem for some users is that some users disable a module,
most notably DRI, by commenting out the "Load" line in their xorg.conf.
This needs to be changed to an uncommented "Disable" line, as DRI is
loaded by default.
Add RawDeviceEvent (pointers only for now).
This commit changes the event queue to use EventLists instead of xEvent
arrays. Only EQ is affected, event delivery still uses xEvent* (look for
comment in mieqProcessInputEvent).
RawDeviceEvents deliver driver information to the client, without clipping or
acceleration.
