Makes the use of IsMaster in ProcChangeKeyboardControl consistent with other
similar loops.
Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For absolute input devices (E.G. touchscreens) in multi-head setups,
we need a way to bind the device to an randr output. This adds the
infrastructure to the server to allow us to do so.
positionSprite() scales input coordinates to the dimensions of the shared
(total) screen frame buffer, so to restrict motion to an output we need to
scale/rotate/translate device coordinates to a subset of the frame buffer
before passing them on to positionSprite.
This is done here using a 3x3 transformation matrix, which is applied to
the device coordinates using homogeneous coordinates, E.G.:
[ c0 c1 c2 ] [ x ]
[ c3 c4 c5 ] * [ y ]
[ c6 c7 c8 ] [ 1 ]
Notice: As input devices have varying input ranges, the coordinates are
first scaled to the [0..1] range for generality, and afterwards scaled
back up.
E.G. for a dual head setup (using same resolution) next to each other, you
would want to scale the X coordinates of the touchscreen connected to the
both heads by 50%, and translate (offset) the coordinates of the rightmost
head by 50%, or in matrix form:
left: right:
[ 0.5 0 0 ] [ 0.5 0 0.5 ]
[ 0 1 0 ] [ 0 1 0 ]
[ 0 0 1 ] [ 0 0 0 ]
Which can be done using xinput:
xinput set-prop <left> --type=float "Coordinate Transformation Matrix" \
0.5 0 0 0 1 0 0 0 1
xinput set-prop <right> --type=float "Coordinate Transformation Matrix" \
0.5 0 0.5 0 1 0 0 0 1
Likewise more complication setups involving more heads, rotation or
different resolution can be handled.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No special memory handling is used to give drivers the maximum flexibility
with the data. Drivers should be able to call realloc on the product string
if needed and perform similar operations.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ActivateDevice was ignoring errors from DeviceCursorInitialize, so
cursor-related calls failed later. Jeremy Huddleston saw that crash in
miPointerConstrainCursor, while with Xvfb I saw it in
miSpriteRealizeCursor.
miDCDeviceCleanup frees any non-NULL GCs. miDCDeviceInitialize calls
Cleanup on any failure, but if it failed early then some of the pointers
in the miDCBufferPtr were garbage. Switch from malloc to calloc to
ensure everything's initialized safely first.
With these two fixes, if CreateGC fails then the server gracefully fails
in FatalError instead of segfaulting.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
As of e2929db7b7, doPolyText uses pFont
consistently rather than looking it up again from the saved XID.
clang noticed that "oldfid = fid" could run when fid hadn't been
initialized yet.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The code this comment was referring to was removed in
8b5086250a "Eliminate bogus event resizing."
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This eliminates a poorly-named, poorly-documented field from the
ScreenRec, using a previously-unused flag bit in each GC instead.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than always returning BadValue, associate an error status like
BadWindow with a resource type like RT_WINDOW, and return the
appropriate one for the requested type.
This patch only touches the core protocol resource types. Others still
return BadValue and need to be mapped appropriately.
dixLookupResourceByType can now return BadImplementation, if the caller
asked for a resource type that has not been allocated in the server.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If filter is NoEventMask (aka CantBeFiltered), grab is null, and the
first event is not in the set of "critical events", then TryClientEvents
simply calls WriteEventsToClient. In that case, it returns 0 for fake or
dead clients, and 1 otherwise. Inline for this special case.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
TryClientEvents already did this; this commit just moves the assignment
one level down so that no event source has to worry about sequence
numbers.
...No event source, that is, except XKB, which inexplicably calls
WriteToClient directly for several events.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This matches the test in TryClientEvents, and is a superset of tests
done by the callers of these functions. The consequence of forgetting
these tests is a server crash, so they're always desirable. In my
opinion, it's better to not require the callers to remember to do these
checks.
For callers that don't do very much work before calling WriteToClient or
WriteEventsToClient, I've removed the redundant checks.
hw/xquartz/xpr/appledri.c has an interesting case: While its check for
"client == NULL" appears redundant with the test in WriteEventsToClient,
it dereferences client to get the sequence number.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27497
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
dix/colormap.c and dix/gc.c now dereference a ClientPtr, so they need to
include dixstruct.h. Regression introduced by commit
11c69880c7.
Reported-by: Robert Hooker <sarvatt@ubuntu.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In order to execute a wire-level ChangeGC request, we need to look up
the resources named by any XIDs in the value-list. Various places in the
server already have pointers to the resources they want to set into the
GC, though, so over time the interface has evolved to accept either XIDs
or pointers, with several different function call signatures used in
different eras.
This patch makes the existing code require pointers to resources rather
than XIDs, and adds a simple wrapper that looks up any XIDs. The old
dixChangeGC API is preserved by delegating to whichever implementation
is appropriate.
This affects error-handling: If any of the XIDs are invalid, then the GC
is unchanged, and its ChangeGC callback is not invoked. This change is
allowed by the protocol spec, which says, "The order in which components
are verified and altered is server-dependent. If an error is generated,
a subset of the components may have been altered."
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
XSELinux was the only consumer of these interfaces and it no longer
needs them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Otherwise we can't check that the XIDs this GC is being initialized with
are accessible to this client.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
The call in CreateGC is particularly questionable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
In commit 42d6112ec2, Eamon changed
dixChangeGC to require DixUseAccess on any GCFont XID. I think
doPolyText needs to require the same level of access. Otherwise
dixChangeGC could fail when it does the same lookup, which doPolyText
doesn't check for.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Previously the callers were only setting errorValue on Success, when
it's ignored, and leaving it alone on failure, when it's sent to the
client.
Since SetFontPath takes the ClientPtr, let it set client->errorValue
instead of letting the callers continue to get it wrong.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using one variant of function/macro makes it easier to fix the code
later.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
FreeResource() keeps clientTable[cid].elements up to date with the
number of resources allocated to the client. The other free
resource functions (FreeResourceByType(),
FreeClientNeverRetainResources() and FreeClientResources()) don't
maintain this invariant.
Typically, the only consequence is that the element count is too high
and we end up allocating the hash table bigger than necessary. However,
FreeResource() also relies on the element count to restart the search if
the list of resources has been changed during a resource destruction
callback. Since FreeResourceByType() doesn't update the count, if we call
that from a resource destruction callback from FreeResource(), the
loop isn't restarted and we end up following an invalid next pointer.
Furthermore, LookupClientResourceComplex() and
FreeClientNeverRetainResources() don't use the element count to detect
if a callback deleted a resource and may end up following an invalid
next pointer if the resource system is called into recursively.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
A few cursor value assignments weren't getting correctly ref counted,
causing leaks of cursor objects.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
this shut up some warnings.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In the process, fixes a memory leak in CloseDevice, and an unchecked
memory allocation in InitializePredictableAccelerationProperties.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
These have the same default, but if you specify something different with
-s on the command line, only the screensaver time is changed. As DPMS
is usually what's desired, change it to match.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If dixLookupResourceByType did not return Success, it will have set the
pointer to NULL, so the second if will always be true.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Bizarre. This seems to never be used before. I left the field in ScreenInfo,
with another name. So, stop looking at it.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
The de-duplication of CheckPhysLimits 942eae6868 added a
condition that is invalid for a Xinerama setup. pScreen is invalid for the
Xinerama case, so comparing it to anything is a bad idea.
Signed-off-by: Tim Yamin <plasm@roo.me.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If both devices are synchronously grabbed, first with a GrabPointer, then
with a GrabKeyboard (GrabModeSync on both), sync.other of each device points
to the grab of the respective other device.
If the keyboard is then thawed through a AllowSome request, the VCK's
sync.other is reset to NULL. Subsequently, an event on the VCP would crash
the server when dereferencing sync.other on the VCP.
The check's purpose is to compare if the other device is grabbed by the same
client, which should be checked by accessing (dev->deviceGrab->grab->resource).
A check of the server-1.3 sources confirms that.
XTS test case: Xlib13 XAllowEvents 20.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we run out of opcodes, nothing is print on the log, making the
problem hard to debug. In the current Xserver, if you enable some
extensions like multibuffer (+2 events) and use nvidia binary driver (+5
events) you can run out of opcode numbers.
Signed-off-by: Paulo Ricardo Zanoni <pzanoni@mandriva.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xext/xf86bigfont.c contains three non-static functions which are called
elsewhere in the server. This creates a new header containing these
declarations in order to fix several warnings:
xf86bigfont.c:285: warning: no previous prototype for `XF86BigfontFreeFontShm'
dixfonts.c:502: warning: implicit declaration of function `XF86BigfontFreeFontS$
dixfonts.c:502: warning: nested extern declaration of `XF86BigfontFreeFontShm'
log.c:436: warning: implicit declaration of function `XF86BigfontCleanup'
log.c:436: warning: nested extern declaration of `XF86BigfontCleanup'
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
A client requesting a GrabModeSync button grab, owner-events true, with only
the ButtonRelease mask set would never receive the press event even if the
grab window had the ButtonPress mask set.
The protocol requires that if owner-events is true, then the delivery mask
is the combination of the grab mask + the window event mask.
X.Org Bug 25400 <http://bugs.freedesktop.org/show_bug.cgi?id=25400>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jim Ramsay <i.am@jimramsay.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tidy up some cosmetic issues in log strings:
- Add missing '\n'
- Fix some strings starting with '\n'
- Remove '\f' from some log strings
These all just look daft in a log with timestamps.
Also clarify log message about screen origin coordinates
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Executed from the ConfigureWindow request, right before sending
ConfigureNotify to the clients.
This commit breaks the ScreenRec ABI.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reintroduce a check which used to be there in the old
ProcessKeyboardEvent/ProcessPointerEvent codepath, which avoids us
recording events subject to a grab twice: once when it's first processed
in EnqueueEvent, and then again when it's thawed and being replayed.
This required a tiny amount of code motion to expose syncEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Several users have pointed out that this commit introduces regressions, most
notably perhaps fluxbox which essentially stops working after a few clicks.
This reverts commit cf72b5437d.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
An absolute device in relative mode may provide valuators outside of the
axis range. Clipping back into the range prevents screen crossings in a
multi-screen (Xinerama) setup as the required screen edge for crossing is
never met: miPointerSetPosition crosses the screen conditional to the X
coordinate being equal to the screen width or _less than_ 0. While the
former can be met when clipping into the coordinate range and scaling, the
latter cannot, resulting in a mouse pointer that gets stuck on the rightmost
screen.
This patch only applies axis clipping for valuators in mode Absolute. If
relative, we allow the values to get above/below the axis ranges. Doesn't
matter, miPointerSetPosition will reset the values to the allowed range even
if no screen was crossed.
This leads to interesting values provided to clients, the valuator range of
the device resets once a screen is crossed and essentially reflects
the position of the cursor on the screen - scaled into the valuator range.
The values themselves are valid given the range though.
In theory, the XI1 specs require that a relative device has a min/max range
of 0/0. This doesn't really go well with devices that actually can switch
mode between relative and absolute since they would have to reset their axis
range when switching. If multiple XI clients are in use, we have no method
of notifying them about the changes, so other clients may continue to use
the wrong axis ranges (note: XI1 wasn't really designed to have multiple
clients use a device). Expecting all relative devices to have this min/max
of 0 is unrealistic at this point.
So pick what is possibly the lesser of all evils, pass the beer and despair.
X.Org Bug 26543 <http://bugs.freedesktop.org/show_bug.cgi?id=26543>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
A client requesting a GrabModeSync button grab, owner-events true, with only
the ButtonRelease mask set would never receive the press event even if the
grab window had the ButtonPress mask set.
The protocol requires that if owner-events is true, then the delivery mask
is the combination of the grab mask + the window event mask.
DeliverGrabbedEvents does this already for us, checking first the delivery
based on owner_events and then based on the grab mask. AFAICT, the device
cannot enter the states FREEZE_BOTH_NEXT_EVENT or FREEZE_NEXT_EVENT that
would be handled by DGE in any possible path here.
Bonus point - CheckPassiveGrabsOnWindows suddenly becomes a lot lesss
complicated.
X.Org Bug 25400 <http://bugs.freedesktop.org/show_bug.cgi?id=25400>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Evdev devices do not have the bell proc set, but XTEST devices do. By
exiting early, the bell only rings if the last keyboard used was the XTEST
keyboard and hence the bell proc is still set on the master but not if an
evdev keyboard was used last.
The better approach here is to try to ring the bell on all devices attached
to this master device in case one or more actually do produce an audible
sound. That's also XKB's behaviour if XkbUseCoreKbd is specified as device
identifier.
X.Org Bug 24503 <http://bugs.freedesktop.org/show_bug.cgi?id=24503>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
A direct grab on a slave device through XI2 detaches it, regardless of
whether the grab is sync or async. So this comment doesn't apply to XI2
anyway.
For XI1, aside from your life being miserable already, it doesn't matter as
XI1 does not have a concept of attachment. You can freeze a device and if
you don't freeze _all_ other devices at the same time, the master device can
still happily send events to the client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Adam Jackson <ajax@redhat.com>
A denial is normal and the behavior should be to drop the event.
Having the log message creates excessive log spam.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
The log messages still need to be there for non-XACE failures.
This reverts commit 4be354c4c2.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
RECORD was disabled during the switch to internal events. This patch
modifies the record callback to work with internal events instead of
xEvents. The InternalEvents are converted to core/Xi events as needed.
Since record is a loadable extension, the EventTo* calls must be externed.
Signed-off-by: Chris Dekter <cdekter@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The only DDX currently using hotplugging is the xfree86 one and it looks
like it'll stay that way for a bit. Move the initialization to the DDX,
since Xephyr, Xnest, and friends don't need HAL or udev notifications.
Add CloseInput (counterpart to InitInput) to be able to clean up the config
initialization from the DDX as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This was removed in 6b5978dcf1 (Do not
reset lastDeviceEventTime when we do dixSaveScreens), but caused a
regression for XResetScreenSaver. Add the lastDeviceEventTime update
back, but restrict it to that case.
X.Org bug#25855 <http://bugs.freedesktop.org/25855>
Reported-by: Lubos Lunak <l.lunak@suse.cz>
Tested-by: Lubos Lunak <l.lunak@suse.cz>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
With the udev backend, config_init() calls NewInputDeviceRequest(),
which enables devices. They can then start sending events, even though
the event queue is only initialized later in InitInput(). Oops.
Debian bug#564256 <http://bugs.debian.org/564256>
Reported-by: Sedat Dilek <sedat.dilek@googlemail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Tested-by: Sedat Dilek <sedat.dilek@googlemail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the input driver (like xf86-input-wacom) removes it's devices
during a call to UnInit, the CloseDownDevices() cannot handle it. The
"next" variable can become a pointer to freed memory.
The patch introduces order-independent device freeing mechanism by
remembering the already freed device ids. The devices can reorder any
time during freeing. No device will be double-freed - if the removing
failed for any reason; some implementations of DeleteInputDeviceRequest
don't free the devices already.
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The index [0] for the second valuator looks bogus; fix it.
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The default behavior of the server is to start with an invisible root cursor.
Be such cursor invisible or inexistent (null), in the end it doesn't matter -
for the user. The content on screen will be the same. Besides, there's no
difference, in terms of performance, whether such cursor is invisible or
simply null. The paths that both take inside the server are roughly the same.
Therefore create a null root cursor becomes irrelevant.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This value isn't actually set for normal events but it saves us some work
for the record extension support.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The semantic remains, only code was moved: reuse chunk of code to realize
cursor on both AllocARGBCursor and AllocGlyphCursor.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This value isn't actually set for normal events but it saves us some work
for the record extension support.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A keyboard event from a device with both valuators and keys will be posted
through the VCK. In this case, do not update the slave device coordinates
from the VCK - they're always 0/0. Leave them as-is, for the next pointer
event will continue where it left.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XkbRemoveResourceClient() returns immediately if dev->key is NULL.
CloseDevice calls XkbRemoveResourceClient until it removes all resources.
If we free dev->key and NULL it before XkbRemoveResourceClient, then
infinite loop ensues, and the server appears to hang on exit or crash.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This profile is inspired by the accel code removed from the wacom driver.
It ascends from zero to acceleration, maxing out at threshold. This means you
can control the slope using threshold, which wasn't possible in wacom.
For sanity's sake, threshold should grow with acceleration.
Works best with adaptive deceleration, since otherwise it only generates
acceleration above 1, causing seldom pixel skips.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
config_init() can now add devices directly instead of scheduling a
timer.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
main.c:134: warning: no previous prototype for 'dix_main'
rootlessScreen.c: In function 'RootlessMarkOverlappedWindows':
rootlessScreen.c:434: warning: function declaration isn't a prototype
backtrace.c:51: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'int'
backtrace.c:54: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'int'
set.c: In function 'RecordSetMemoryRequirements':
set.c:413: warning: old-style function definition
set.c: In function 'RecordCreateSet':
set.c:425: warning: old-style function definition
stub.c: In function ‘main’:
stub.c:236: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
NewInputDeviceRequest (and RemoveDevice) have checks in place to not allow
removal of the VCP/VCK. When shutting down, they need to be cleaned up
nonetheless to free the memory associated.
X.Org Bug 25028 <http://bugs.freedesktop.org/show_bug.cgi?id=25028>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The "counterpart to biggest hack" included checking for the motion history
function - which is unified in 1.7. Hence the check (which is already
removed) would evaluate to true anyway, and this comment isn't needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
InitValuatorClassDeviceStruct always initializes with the default profile.
The default profile allocs data and adds a few properties which become
obsolete if the profile is changed lateron by the driver.
The property handlers are stored in the device's devPrivates and cleaned up.
Ideally, the property handler ID's could be stored somewhere more obvious,
but that seems to require breaking the ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Simon Thum <simon.thum@gmx.de>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently the XTEST device is limited to the same number of buttons the core
device has. This breaks if a user has a mouse with more than 3 buttons
connected and is using a core client to fake button 8+ presses.
Rather than expecting all clients to fix themselves, just increase the
default number of buttons to 10, which is somewhat a compromise. Ideally,
the XTEST devices should adjust themselves to the highest number of buttons
available on the slave devices (like the master pointers already do), but
that's a taks for another day.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Just open and close a client that creates cursors in order to
reproduce. In the problem case bits->refcnt is -1 and therefore
bits->devPrivates is never released.
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
FindClientResourcesByType() will walk all colormaps on all screens; we
only want to fix up the current screen. Otherwise, screens > 0 will
have the visual pointers for their colormaps pointing off into space.
Signed-off-by: Adam Jackson <ajax@redhat.com>
libX11 ModMap.c believes that GetModifierMapping can never return an error
Xserver devices.c believes that GetModifierMapping can return an error if
the ModMap couldn't be generated
According to the protocol document I have, libX11 is right, so adjust the
server to send back an empty modmap if one couldn't be made...
http://bugs.freedesktop.org/show_bug.cgi?id=24621
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This function was moved verbatim into libXfont-1.4, and it is not used
by the server or any drivers. Exporting it in both places leads to
multiple definition linking errors on Cygwin, where we need to use a
static libXfont due to poor weak-symbol handling.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
It is normal for XACE to deny an event delivery, so these log messages
shouldn't trigger when that happens. Just drop them for now.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Instead of returning BadAccess when "read" permission is denied
on a device, falsify the device state (buttons down, keys pressed).
This is nicer to applications, but may still have undesired side
effects. The long-term solution is not to use these requests in
event-driven code!
Requests affected: QueryPointer, QueryKeymap, XiQueryDevice.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
A device with valuators but no keys is definitely a pointer device and needs
to be attached to the VCP. Otherwise, the class copying happens on the VCK
and the VCP isn't updated with the events that are to be sent through it.
This addresses the trigger for #24441, not the actual issue.
Jury is still out on valuator+key devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Not only does automake generate unnecessary rules for dix.O on platforms
for which SPECIAL_DTRACE_OBJECTS is false, it generates duplicate sets
when "if SPECIAL_DTRACE_OBJECTS" is nested inside "if XSERVER_DTRACE"
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
On 64-bit systems, int and pointers don't have the same size, so GCC gives
warnings about casts between int and pointer types. However, in the cases
covered by this patch, it's always a value that fits in int being stored
temporarily as a pointer and then converted back later, which is safe.
Casting through the pointer-sized integer type intptr_t convinces the
compiler that this is OK.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
It can be reproduced when the server is regenerated and for some
reason the private keys are reassigned in a different order: a
manually allocated private may get an index formerly used by a
preallocated private. In that case it will first be manually freed and
then again by dixFreePrivates, as items[i].size was never zeroed
out. Do it in dixResetPrivates.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Replaces special handling for Xquartz DDX and scales better to handling
the multiple platforms that now have some level of Dtrace support available.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Currently the root coordinates may fall into ]-1..0] if the subpixel
remainder is less than 0. Screen coordinates mustn't go below 0, so use
miPointerSetPosition to cap off the remainder if the coordinates are below
0.
This is cheating a bit, a more comprehensive solution to deal with subpixels
correctly when crossing screens is needed. For now, this'll do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Simon Thum <simon.thum@gmx.de>
The previous code was copied and in both cases incorrectly fixed
up the colormaps after resizing the visuals, this patch consolidates
the visual resize + colormaps fixups in one place. This version
also consolidates the vid allocation for the DepthPtr inside the
function.
I'm not 100% sure colormap.[ch] is the correct place for this but
visuals are mostly created in fb and I know thats not the place to
be resizing them.
Fixes fd.o bug #19470.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ar loses the dtrace probe magic when building static libraries, so we
have to link with the .O files in order to resolve the dtrace probe symbols.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Now that all event queues hold internal events only, they never need
to be resized. Resizing them led to memory corruption as they would
get sized for an appropriate xEvent, not an internal event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
49b93df8a3 made the hard dependency on
a "fixed" font go away but only Xorg could use the built-ins fonts by
default.
With this commit, all DDXs get "built-ins" appended to their FontPath, not
just Xorg.
Tested with Xorg, Xvfb and Xnest.
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
silences compiler warning:
events.c: In function 'FixUpEventFromWindow':
events.c:2262: warning: 'child' may be used uninitialized in this function
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
AlwaysCore and SendCoreEvents specify whether a device is to send core
events. A device that has either disabled is not supposed to send core
events.
With MPX/XI2, a device that is attached automatically sends core events when
the event is routed through the master device. Floating a slave device
disables core events by breaking the route.
This patch automatically floats devices that have coreEvents disabled in the
xorg.conf/HAL. This replicates the behaviour of a SendCoreEvents "false"
device in server 1.6 and earlier.
The devices may still be reattached to a master at runtime.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In theory, the MD should change back to its old, original classes when the
last SD is detached. Thanks to the XTEST devices, we'll always have an SD
attached until the MD is removed. So let's not worry about that and do
nothing instead of having some code that's essentially untested.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For core and XI1 events, store the key_repeat flag in the sequence number
until TryClientEvents. The sequenceNumber is unset until TryClientEvents.
[Also thrown in, some random indentation changes. Thanks]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
dixLookupWindow may return BadMatch if the window in question isn't actually
a window. In this case, GetProperty needs to return BadWindow - not
BadMatch.
X.Org Bug 23562 <http://bugs.freedesktop.org/show_bug.cgi?id=23562>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Removing the device cursor while the cursor was within the window did not
update the visible sprite until the next enter/leave event.
X.Org Bug 23608 <http://bugs.freedesktop.org/show_bug.cgi?id=23608>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch corrects a misnaming of XTest-related functions.
The extension itself announces itself as XTEST. Xtst is the library name
itself, but all library functions are prefixed by XTest. Same with the
naming in the server.
- Rename all *Xtst* functions to *XTest* for consistency with the library
and in-server API.
- Rename the "Xtst device" property to "XTEST device" for consistency with
the extension naming.
- Rename the device naming to "<master device name> XTEST device". The
default xtest devices become "Virtual core XTEST pointer" and "Virtual
core XTEST keyboard".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If CheckWindowOptionalNeed is called consecutively (and the first removes optional), then
we will SEGFAULT. This can happen in XQuartz because ReparentWindow will call
pScreen->ReparentWindow which can DeleteProperty which will CheckWindowOptionalNeed... then
ReparentWindow will call it again later indiscriminantly.
(cherry picked from commit b608c864cc)
The smart scheduler is designed to minimize scheduler overhead by
increasing the interval between WaitForSomething calls when a single
client is running. However, the software rotation code depends on
its BlockHandler being invoked for screen updates; the long delays
caused by the smart scheduler optimizations means that screen updates
can be delayed a long time as well.
The change is simple -- prevent the smart scheduler from increasing
the scheduling interval while any screen is using software rotation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The extern declaration in xichangehierarchy.c was broken anyway.
This fixes a crash on creating a new master device.
Reported-by: Maxim Levitsky
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When we turn off DPMS with DPMSModeOff and do dixSaveScreens, don't reset the
event time else session clients using IDLETIME will be reset.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DCEs are now processed when sent throught the master device, not when sent
through the slave device. This includes a removal of some un-used (or partly
used) fields in the DCE itself to something more self-explanatory.
TODO: if a device has events queued and its attachment is changed, the DCE
is silently dropped now. Instead, it should be generated as soon as the
first event after the attachment is sent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The version in eventconvert.c was half broken and for some reason we ended
up with a second version in exevents.c (which works). Move it over to where
it belongs and call EventToXI2 instad of having a custom function for it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the windows are restructured, CheckMotion needs to be called for all
masters and floating slaves to update the spriteTrace.
X.Org Bug 23257 <http://bugs.freedesktop.org/show_bug.cgi?id=23257>
Tested-by: Thomas Jaeger
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DeviceClassesChangedEvents (where this name comes from) have been replaced
with DeviceChangedEvents.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>