Inferring modes from sync ranges is only valid if the monitor says it's
valid. If the monitor says it's valid, then we'll have already added
those modes during EDID block parse. If it doesn't, then we should
believe it.
If there's no EDID for an output, but sync ranges from the config, we'll
still add default modes as normal.
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxvendor.c: In function ‘__glXVForwardPipe0WithReply’:
glxvendor.c:205:10: warning: ‘be_buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxvendor.c: In function ‘__glXVForwardAllWithReply’:
glxvendor.c:284:10: warning: ‘be_buf’ may be used uninitialized in this function
glxvendor.c:285:10: warning: ‘be_buf_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXForwardPipe0WithReply’:
glxsingle.c:218:10: warning: ‘be_buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXForwardAllWithReply’:
glxsingle.c:300:10: warning: ‘be_buf’ may be used uninitialized in this function
glxsingle.c:301:10: warning: ‘be_buf_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXDisp_ReadPixels’:
glxsingle.c:760:11: warning: ‘buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
render2swap.c:264:13: warning: ‘swapArray’ defined but not used
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateGLXPixmap’:
glxcmds.c:1663:20: warning: comparison between pointer and integer
glxcmds.c:1663:38: warning: comparison between pointer and integer
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateGLXPixmap’:
glxcmds.c:1641:22: warning: ‘pGlxScreen’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateContext.clone.6’:
glxcmds.c:105:19: warning: ‘be_fbconfigId’ may be used uninitialized in this function
glxcmds.c:104:14: warning: ‘be_vid’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘__glXGetDrawableAttributes’:
glxcmds.c:3295:8: warning: ‘screen’ may be used uninitialized in this function
glxcmds.c:3298:8: warning: ‘attribs_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘__glXChangeDrawableAttributes’:
glxcmds.c:3464:8: warning: ‘screen’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Same result, but now also triggers on slave keyboards that send pointer
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
The calling for allocate_or_reuse_buffer may fail due to some reason, e.g. out of memory.
If the buffers[] were not initialized to be NULL, the following err_out may try to access an illegal memory, which will cause X crash afterward.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Justin Dou <Justin.Dou@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows set_percent_option in synaptics to work as described,
and should generally enable to check option syntax without log spam.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InitInput simply initialises all input devices now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Did you know that anonymous enums with function scope will not only
override the enum values from global scope, but will be treated as
entirely different types? C's type system just rules.
xf86Crtc.c: In function 'handle_detailed_monrec':
xf86Crtc.c:1555:33: warning: comparison between 'enum det_monrec_source' and 'enum <anonymous>'
xf86Crtc.c:1562:33: warning: comparison between 'enum det_monrec_source' and 'enum <anonymous>'
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
It's broken for devices with BARs above 4G, and the sysfs method should
work everywhere anyway. As a pleasant side effect, this fixes some
warnings:
fbdevhw.c: In function 'fbdev_open_pci':
fbdevhw.c:333:4: warning: cast from pointer to integer of different size
fbdevhw.c:334:4: warning: cast from pointer to integer of different size
fbdevhw.c:336:4: warning: cast from pointer to integer of different size
fbdevhw.c:337:4: warning: cast from pointer to integer of different size
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
helper_exec.c: In function 'pciCfg1in':
helper_exec.c:507:4: warning: passing argument 2 of 'pci_device_cfg_read_u32' from incompatible pointer type
/usr/include/pciaccess.h:153:5: note: expected 'uint32_t *' but argument is of type 'CARD32 *'
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
xf86VidMode.c: In function 'VidModeGetMonitorValue':
xf86VidMode.c:637:19: warning: 'ret.i' may be used uninitialized in this function
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Add a keycode mapping for VK_OEM_8 as RCtrl, which is issued by Canadian
Multilingual Standard layout
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Ignore MappingNotify events sent to clipboard integration client,
xmodmap changes aren't of interest to it, but there is no mechanism
to express that disinterest.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Replace useless #if 0/ErrorF/#endif with winDebug
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
If none of Xv ports were affected by window tree modifications we don't
want scan the port list. To avoid useless scanning of port list
PostValidateTree hook is only registered when ClipNotify was called for
any port.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
ValidateTree calls first ClipNotify and later might call
WindowExposures. To avoid useless double reput ClipNotify delays reput
to WindowExposures or PostValidateTree.
PostValidatTree checks all ports if there is clip changes. On clip
changes reput is done to move or scale the overlay.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
If window gets exposed but clipboxes doesn't change drivers would avoid
color key fill. This makes XResizeWindo&co to lose colorkey if
background is painted.
To help drivers to avoid filling colorkey for each put server can
provide helper function if there is exposed areas. Server can subtract
exposed areas from filled region.
As a side effect we can avoid useless color key fills if window only
moves in screen without background fills.
v3:
* Change tracking to filled area to account for client initiated clip
changes
* Make overlaid XvPutImage behavior like textured XvPutImage or PutImage
* Make region dynamically allocated only when required.
v4:
* Simplify new driver interface to reduce duplicate code
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
xf86XVFillKeyHelperDrawable can be used to implement
xf86XVFillKeyHelper.
V2:
* Remove RegionTranslate that clobbered parameter region.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
The EDID processing regards physical dimensions of 0mm x 0mm as
invalid. Previously the old values for height and width would be
preserved if none of the physical dimension specifications in the new
EDID were considered valid.
This will come up in particular if first a monitor is connected to an
output, and then a projector is connected. Since projectors generally
report physical dimensions of 0mm x 0mm, this would result in the
projector claiming to have the physical dimensions of the monitor.
Signed-off-by: Evan Broder <ebroder@mokafive.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DGAIsDgaEvent() is not used anymore.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Move some variables to the scope where they are used.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously some sort of absolute coordinates were sent out in
the padding of the DGA2 Motion and Button events. DGAMouseX
and DGAMouseY were used to keep track of said coordinates.
libXxf86dga doesn't use that data for anything, and at least
git history didn't show any past usage either. So let's just
remove the last remnants of of this mess.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Copy dx/dy from the internal event to the DGA2 Motion/Button events.
Do the same for Key events for the sake of keeping the code consistent.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
mieq_installed is used as a boolean, so why not make it such. Also
it's a static variable, so the the explicit zero initialization can
be removed.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove the handler only if it was installed. Also mark it as
uninstalled, otherwise it wouldn't get reinstalled after a
server reset.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The ET_DGAEvent handler is only installed when a client
requests relative events via DGA1. Do it also when a client
requests DGA2 events.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
DGA key event support was lost in commit
8da0ff2d51. Bring it back.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We get an XP_EVENT_DISPLAY_CHANGED event when our display configuration is
changed. If this change was caused by hotplugging a monitor or Mac Display
Preferences changes by the user, we need to call RRScreenSizeNotify in order
to ensure new connections get the correct screen size.
http://xquartz.macosforge.org/trac/ticket/460
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
xdmxconfig.c: In function ‘dmxConfigCanvasDraw’:
xdmxconfig.c:299:23: warning: ‘maxHeight’ may be used uninitialized in this function
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: In function ‘dmxBlockHandler’:
dmxinputinit.c:610:44: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxWakeupHandler’:
dmxinputinit.c:637:41: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxInputInit’:
dmxinputinit.c:1041:36: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: At top level:
dmxinputinit.c:135:29: warning: ‘DMXCommonOth’ defined but not used
DMXCommonOth is actually mentioned in a #if 0 block, so delete it and
the block that references it. If anyone needs it, git remembers.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxgc.c: In function ‘dmxChangeClip’:
dmxgc.c:386:5: warning: case label value exceeds maximum value for type
dmxgc.c:387:5: warning: case label value exceeds maximum value for type
dmxgc.c:388:5: warning: case label value exceeds maximum value for type
dmxgc.c:389:5: warning: case label value exceeds maximum value for type
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Dear gcc: I do not care about machines where sizeof(void *) <
sizeof(int), and neither should you.
dmxextension.c: In function ‘dmxBECreateResources’:
dmxextension.c:858:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderPict’:
dmxextension.c:1062:29: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderGlyph’:
dmxextension.c:1084:35: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxAttachScreen’:
dmxextension.c:1277:8: warning: cast to pointer from integer of different size
dmxextension.c:1286:34: warning: cast to pointer from integer of different size
dmxextension.c:1292:35: warning: cast to pointer from integer of different size
dmxextension.c: In function ‘dmxBEDestroyResources’:
dmxextension.c:1456:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxDetachScreen’:
dmxextension.c:1599:8: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Fix winShadowUpdateDD(|NL) so we don't try to blit to primary surface if it didn't get allocated
(Intel drivers, in particular, seem to like to issue a WM_DISPLAYCHANGE during a suspend/resume
cycle, but not allow surface to be allocated right then)
Also:
Use winReleasePrimarySurfaceShadowDD(|NL) in winFreeFBShadowDD(|NL) rather than open coding it
Don't mess about recreating surface if we're going to resize it anyhow
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Make ShadowGDI drawing engine only change the size of the screen
pixmap/shadow framebuffer on an RANDR change, not the bpp/depth
as well.
The server requires the screen pixmap's depth to be invariant.
Other drawing engines aren't quite as affected by this issue as
they won't draw to the display, if it has changed colour depth,
but probably still need some attention.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
This is only relevant to pre-NT versions of Windows, which are all EOL.
Also, it's in the wrong place now as framebuffer can get resized.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Fortunately, these swapped constants are benign as they have the same
value, 0
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Don't turn off -multiplemonitors when all monitors don't have the
same pixel format and when using shadow GDI engine, just warn that
performance may be degraded
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
When RANDR resizing is enabled, generate an internal RANDR change when
WM_DISPLAYCHANGE occurs in rootless modes for screens which occupy an
entire monitor or the virtual desktop.
Store the monitor number and use that to handle WM_DISPLAYCHANGE for a
screen specified with '-screen @monitor'
In rooted mode, WM_DISPLAYCHANGE isn't relevant (except where display
depth changes may cause problems). (A maximized screen window will get
WM_SIZE to adjust it to the new monitor size)
In rooted fullscreen mode, WM_DISPLAYCHANGE shouldn't be seen, as we
have the resolution we have selected for the fullscreen session)
(Could client randr requests be handled in fullscreen to cause a change
of the fullscreen resolution? )
Don't bother do a RANDR resize if the dimensions aren't actually changing
when WM_DISPLAYCHANGE is sent (should handle WM_DISPLAYCHANGE to size 0x0
that the intel driver seems to like to send)
Various debug output improvements
Also, remove the note that XWin can't handle display mode changes from
the man page
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
To avoid recursion, WM_SIZE requests shouldn't generate XRANDR requests
when no change is neeeded.
We do the actual resize on WM_EXITSIZEMOVE, as resizing occurs in
a modal loop, to avoid a backlog of resize events building up as
the X server doesn't get a change to process anything until the resize
is completed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Implement framebuffer resizing in RANDR extension:
Resize the frame buffer, the screen's root window and the native window
containing the root window image.
Correctly allow for decorations in new native window size when resizing native window
to fit the new framebuffer size with AdjustWindowRectEx()
Update physical size info for a screen when it is changed by RANDR
Forbid client-requested RANDR changes in fullscreen and rootless modes
Only resize window on an external RandR request, to avoid recursing on
a WM_SIZE requested resize.
Also, add prototypes for winRandRInit() and winDoRandRScreenSetSize() to header file
Also, update the author list and copyright for winrandr.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Add -resize command line option to configure how native window sizing frame
is used.
In additions to the existing fixed and scrollbars modes, add a new mode to
allow framebuffer to be resized using native window frame
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Move QueryMonitor() out of windprocarg.c into a new file, winmonitors.c,
as we use to use it from other places as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Remove an attempt at the rather difficult optimization of detecting
if WM_DISPLAYCHANGE affects any of the monitors which intersect the
native window for the X screen.
We'll always act as if it does, which it probably usually the case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
(This stored calculation was wrong if -dpi came after -screen on the command
line, anyhow)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Refactor the drawing engines so we can explicitly allocate and release the framebuffer for a screen
Move the setting of dwPaddedWidth into the DDNL engine, so it is updated when the framebuffer changes size
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Some trivial build fixes required
Also fill out all function pointers for primaryfb engine
Also tidy up the man page section describing drawing engines.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Following the convention makes it easier to locate man pages,
user's or developer's documentation and specifications.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Makefile.am: there are only 4 string substitutions to be done in this file.
SED is much simpler than the C pre processor which adds its own
strings which must be substituted by sed, still.
xorgconf.cpp: replaced __xconfigfile__ with xorg.conf as this file name
is hard coded in the xserver configuration and cannot change.
Replace XCOMM with # permanently.
Delete cpprules.in as it isn't used anywhere else. Should one need
cpprules for real cpp work, there is one in Xquartz from which the
the old man pages code have been stripped.
Fix trailing spaces.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create a manpages.am makefile snippet in the root dir.
Each man page makefile includes manpages.am.
Now all man pages in xserver are generated the same way
using the same method as all of other xorg modules.
All ".man.pre" files in git are ".man" now.
Links are no longer created between different file types.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use standard directory and makefile.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Now can be built easily on any platform in the man directory
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is dead code which will not be used in the future.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man)
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>