Makes the use of IsMaster in ProcChangeKeyboardControl consistent with other
similar loops.
Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Just some extra clarification as pointed out by Dan Nicholson,
and that memcpy should have been a memcmp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
For absolute input devices (E.G. touchscreens) in multi-head setups,
we need a way to bind the device to an randr output. This adds the
infrastructure to the server to allow us to do so.
positionSprite() scales input coordinates to the dimensions of the shared
(total) screen frame buffer, so to restrict motion to an output we need to
scale/rotate/translate device coordinates to a subset of the frame buffer
before passing them on to positionSprite.
This is done here using a 3x3 transformation matrix, which is applied to
the device coordinates using homogeneous coordinates, E.G.:
[ c0 c1 c2 ] [ x ]
[ c3 c4 c5 ] * [ y ]
[ c6 c7 c8 ] [ 1 ]
Notice: As input devices have varying input ranges, the coordinates are
first scaled to the [0..1] range for generality, and afterwards scaled
back up.
E.G. for a dual head setup (using same resolution) next to each other, you
would want to scale the X coordinates of the touchscreen connected to the
both heads by 50%, and translate (offset) the coordinates of the rightmost
head by 50%, or in matrix form:
left: right:
[ 0.5 0 0 ] [ 0.5 0 0.5 ]
[ 0 1 0 ] [ 0 1 0 ]
[ 0 0 1 ] [ 0 0 0 ]
Which can be done using xinput:
xinput set-prop <left> --type=float "Coordinate Transformation Matrix" \
0.5 0 0 0 1 0 0 0 1
xinput set-prop <right> --type=float "Coordinate Transformation Matrix" \
0.5 0 0.5 0 1 0 0 0 1
Likewise more complication setups involving more heads, rotation or
different resolution can be handled.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
commit c2d0b3b437
"xfree86: store the InputAttributes in the input device."
introduced the new API. Bump the input version so drivers can handle this
appropriately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Daniel Stone deleted the API for these in 2006, in commit
96e32805d1.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Eric Anholt made the corresponding fix in glx/render2swap.c in commit
49d38ab232.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Mikhail fixed the corresponding Xallocs, but missed these uses of Xfree
in commit 3f3ff971ec.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Three years ago in commit f62beb6f36 ajax
deleted the code that could have set this format string to anything
else, so just use the format string literal. This makes GCC happy since
it can check the argument types, which, by the way, weren't correct
since this format string doesn't need any arguments.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Access to pDesc was always guarded by (nCharInfos > 0), so the code
wasn't actually buggy, but this makes it clear that it's correct.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
InputAttributes largely decide which configuration values get merged from
the xorg.conf.d snippets. While they are available in the config backend,
they are not available for any other callers of NewInputDeviceRequest().
Drivers implementing driver-side hotplugging do not have access to these
attributes and cannot have xorg.conf.d snippets specific to dependent
devices. For example, the following case cannot work right now:
Section "InputClass"
MatchProduct "Wacom"
Option "PressCurve" "0 0 100 100"
...
EndSection
Section "InputClass"
MatchProduct "Wacom"
MatchProduct "eraser"
Option "PressCurve" "10 10 50 50"
...
EndSection
The second section is not triggered, as the wacom driver cannot supply the
InputAttributes to NewInputDeviceRequest().
Add the attributes to the IDevRec and merge them into the InputInfoRec to
make them accessible in the driver. This changes the ABI for input drivers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No special memory handling is used to give drivers the maximum flexibility
with the data. Drivers should be able to call realloc on the product string
if needed and perform similar operations.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reverts part of the effects of 518f3b189b,
"mi: don't thrash resources when displaying the software cursor across
screens". The per-screen cache is preserved, and the GCs are still
allocated eagerly, but now it doesn't construct pRootPicture until
somebody attempts to draw an ARGB cursor.
I noticed crashes in Xnest, which doesn't support the RENDER extension,
but I suspect other DDXes that support disabling that extension would
have had issues as well.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Oliver McFadden reports that the invisible cursor sprite caused damage
events and thus unnecessary redrawing, so removing it improves
performance when using software cursor sprites, especially on those
devices where you do not want a visible cursor: touchscreen tablets,
embedded devices, etc.
For the xfree86 DDX, if hardware cursors are used, the driver is
required to provide a HideCursor function, which will be called instead
of trying to set a null cursor. I think software cursors are already
safe. The other DDXes also look safe.
As far as I can tell, there's no reason to realize a null cursor. I
think everything that handles null cursors doesn't rely on any setup in
RealizeCursor, and treats them as empty cursors.
Xnest assumes that if a cursor is created, it will be realized before it
is freed, which didn't happen if the invisible cursor was never used in
a server generation. So this fixes a segfault in Xnest as well.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Oliver McFadden <oliver.mcfadden@nokia.com>
Signed-off-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Tested-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch creates the private xf86PciMatchDriver hook, which goes inside pci
code to match the drivers found in the system.
Now there's no direct references to PCI inside xf86AutoConfig.c anymore.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
xf86MatchDevice will never be called in configuration time.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Move all PCI procedures from xf86Helper.c to a more meaningful place (namely
xf86pciBus.c). xf86Helper.c is free of PCI code now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
RAC is the champion of remaining trash for sure!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This function had a wrong name and was just logging the primary device. No one
cares about it honestly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Should be gone in commits 3c03d9f1 and a9d7d659a respectively.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
attr->tags is an array of strings (null-terminated). When matching, match
against each string instead of each [i,end] substring in the first tag.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Keyboard setup belongs in drivers, not in a document no one sees
because we don't even install it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
The license only allows distribution of verbatim copies, so we can't
update it, even to correct the incorrect address to send updates to.
The Mesa & DRI web pages are much better sources of current information
anyway.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
When nothing is connected at startup and we canGrow, allow the server to start with a 1024x768 framebuffer, and when the drivers send hotplug events this will expand to the correct size dynamically.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ActivateDevice was ignoring errors from DeviceCursorInitialize, so
cursor-related calls failed later. Jeremy Huddleston saw that crash in
miPointerConstrainCursor, while with Xvfb I saw it in
miSpriteRealizeCursor.
miDCDeviceCleanup frees any non-NULL GCs. miDCDeviceInitialize calls
Cleanup on any failure, but if it failed early then some of the pointers
in the miDCBufferPtr were garbage. Switch from malloc to calloc to
ensure everything's initialized safely first.
With these two fixes, if CreateGC fails then the server gracefully fails
in FatalError instead of segfaulting.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since the headers we export in the SDK use the _X_NORETURN #define
introduced in xproto 7.0.17, drivers built with the SDK will also
need to have at least that version of xproto installed.
I considered exporting the version from configure.ac, but decided not
to since the minimum required to build the X server may not always
be the same as the minimum required to build drivers (for instance,
if the X server used a new #define in its .c files or internal headers,
but didn't export it in any of the SDK headers).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
For AtomError, this should fix a clang warning; in the other cases it's
just good documentation.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As of e2929db7b7, doPolyText uses pFont
consistently rather than looking it up again from the saved XID.
clang noticed that "oldfid = fid" could run when fid hadn't been
initialized yet.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When Xorg is started on display :0, this ioctl is called to grant the
user the rights traditionally associated with /dev/console (before VT
support was added), such as access to local peripheral devices.
Also adds a Solaris-specific -C flag to force starting on /dev/console
instead of /dev/vt*, allowing programs like xterm -C to access the
console device.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
- Note that -br is now default.
- Move -bs after -br for alphabetical ordering.
- Remove -config option that's been hidden in "ignore" section,
since ajax removed the -config code a couple years back.
- Add -nocursor option.
- Add xinput & xrandr to list of runtime server control programs
- Replace XDarwin with Xquartz in list of Xservers
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The code this comment was referring to was removed in
8b5086250a "Eliminate bogus event resizing."
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This eliminates a poorly-named, poorly-documented field from the
ScreenRec, using a previously-unused flag bit in each GC instead.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
hw/xwin/Makefile.am was referencing this instead of hw/xwin/glx/Makefile.am
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
