Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Mostly http->https conversions, but also replaces gitweb.fd.o
with gitlab.fd.o, and xquartz.macosforge.org with xquartz.org.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Old behavior was to translate the middle mouse button, as well as
every other button that isn't the left or right mouse button,
to act as the middle mouse button (2).
New behavior is to translate only the middle mouse button to 2,
and translate higher-numbered buttons to 8 and higher.
This allows additional mouse buttons to behave under XQuartz
more like they do by default under X11 on other platforms
(e.g. Linux and BSD distributions).
Signed-off-by: Christopher Chavez <chrischavez@gmx.us>
Separate each statement of the form "assert(a && b);" into "assert(a);"
and "assert(b);" for more precise diagnostics, except for this clever
use in drmmode_display.c where it was used to pass a hint to developers:
assert(num_infos <= 32 && "update return type");
Differences from autotools:
* Autotools defined NO_ALLOCA for OSX builds. I don't think we need
this anymore as Xalloc.h is no longer used anywhere in the xserver.
* X11.bin is linked with -u,miDCInitialize, and then libserver_mi
provided to satisfy (just) that. It's been that way since the commit
which added it. We can't write the equivalent in meson due to linker
argument ordering issues, but do we really need to?
* An explicit -Dsecure-rpc=false is required for OSX, since in meson we
don't do the checks that XTRANS_SECURE_RPC_FLAGS did for the existence
of the specific RPC functions required.
Promote the generated file containing the date & time build was
configured to top-level.
Rename it from xf86Build.h to buildDateTIme.h.
Use it as well in XQuartz, stringize BUILD_DATE when needed.
They were defined as empty macros on all platforms except for the
long unsupported Cray systems which needed to use bitfields to define
types smaller than 64-bits.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
A cosmetic change for automake (though we have to replicate some of
xorg-macros.m4 in manpages.am now), but meson's configure_file() wants
@-delimited strings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Add a stub for Xnest so it continues to link, but otherwise we support
GLX on every server so there's no need to make every DDX add it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The big change here is MakeCurrent and context tag tracking. We now
delegate context tags entirely to the vnd layer, and simply store a
pointer to the context state as the tag data. If a context is deleted
while it's current, we allocate a fake ID for the context and move the
context state there, so the tag data still points to a real context. As
a result we can stop trying so hard to detach the client from contexts
at disconnect time and just let resource destruction handle it.
Since vnd handles all the MakeCurrent protocol now, our request handlers
for it can just be return BadImplementation. We also remove a bunch of
LEGAL_NEW_RESOURCE, because now by the time we're called vnd has already
allocated its tracking resource on that XID.
v2: Update to match v2 of the vnd import, and remove more redundant work
like request length checks.
v3: Add/remove the XID map from the vendor private thunk, not the
backend. (Kyle Brenneman)
v4: Fix deletion of ghost contexts (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Just never filled in, oops. Seems to have gone unnoticed because
normally glXQueryContext simply returns the values filled in by the
client library when the context was created. The only path by which you
normally get to a GLXQueryContext request is glXImportContext, and then
only if the context is already indirect.
However, that's a statement about Mesa's libGL (and anything else that
inherited that bit of the SGI SI more or less intact). Nothing prevents
a mischeivous client from issuing that request of a direct context, and
if they did we'd be in trouble because we never bothered to preserve the
associated fbconfig in the context state, so we'd crash looking up
GLX_VISUAL_ID_EXT. So let's fix that too.
v2: Fixed missing preservation of the config in DRI2 (Eric Anholt)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This header is a truly ancient remnant of the SGI SI code, which used
the same struct for visual/fbconfig state on both sides of the wire.
We're not using this struct ourselves so let's stop depending on the
header.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Roundhouse kick replacing the various (sizeof(foo)/sizeof(foo[0])) with
the ARRAY_SIZE macro from dix.h when possible. A semantic patch for
coccinelle has been used first. Additionally, a few macros have been
inlined as they had only one or two users.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Works around <rdar://problem/7150340>.
Tested-by: Martin Otte <martinjotte@gmail.com>
Tested-by: Tom Lane <tgl@sss.pgh.pa.us>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Without this, assertion failures can make life hard for users and those
trying to help them.
v2:
* Change commit log wording slightly to "can make life hard", since
apparently e.g. logind can alleviate that somewhat.
* Set default handler for SIGABRT in
hw/xfree86/common/xf86Init.c:InstallSignalHandlers() and
hw/xquartz/quartz.c:QuartzInitOutput() (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Special case for the systemd-logind case in xfree86: when we're vt-switched
away and a device is plugged in, we get a paused fd from logind. Since we
can't probe the device or do anything with it, we store that device in the
xfree86 and handle it later when we vt-switch back. The device is not added to
inputInfo.devices until that time.
When the device is removed while still vt-switched away, the the config system
never notifies the DDX. It only runs through inputInfo.devices and our device
was never added to that.
When a device is plugged in, removed, and plugged in again while vt-switched
away, we have two entries in the xfree86-specific list that refer to the same
device node, both pending for addition later. On VT switch back, the first one
(the already removed one) will be added successfully, the second one (the
still plugged-in one) fails. Since the fd is correct, the device works until
it is removed again. The removed devices' config_info (i.e. the syspath)
doesn't match the actual device we addded tough (the input number increases
with each plug), it doesn't get removed, the fd remains open and we lose track
of the fd count. Plugging the device in again leads to a dead device.
Fix this by adding a call to notify the DDX to purge any remainders of devices
with the given config_info, that's the only identifiable bit we have at this
point.
https://bugs.freedesktop.org/show_bug.cgi?id=97928
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This code is safe. If the data race fails, the result is that we take the
lock and recheck.
==================
WARNING: ThreadSanitizer: data race (pid=31401)
Read of size 1 at 0x00010f5d2500 by thread T11:
#0 wait_for_mieq_init darwinEvents.c:102 (X11.bin+0x00010003155a)
#1 -[X11Application(Private) sendX11NSEvent:] X11Application.m:1330 (X11.bin+0x00010001d652)
#2 __28-[X11Application sendEvent:]_block_invoke X11Application.m:476 (X11.bin+0x00010001887f)
#3 __tsan::invoke_and_release_block(void*) <null>:144 (libclang_rt.tsan_osx_dynamic.dylib+0x00000005d97b)
#4 _dispatch_client_callout <null>:33 (libdispatch.dylib+0x0000000020ef)
Previous write of size 1 at 0x00010f5d2500 by thread T8:
[failed to restore the stack]
Location is global 'mieqInitialized' at 0x00010f5d2500 (X11.bin+0x000100599500)
Thread T11 (tid=4367138, running) created by thread T-1
[failed to restore the stack]
Thread T8 (tid=4367130, running) created by main thread at:
#0 pthread_create <null>:144 (libclang_rt.tsan_osx_dynamic.dylib+0x000000024490)
#1 create_thread quartzStartup.c:78 (X11.bin+0x000100039d2d)
#2 QuartzInitServer quartzStartup.c:95 (X11.bin+0x000100039b96)
#3 X11ApplicationMain X11Application.m:1238 (X11.bin+0x00010001cd54)
#4 X11ControllerMain X11Controller.m:984 (X11.bin+0x00010002a5b2)
#5 server_main quartzStartup.c:136 (X11.bin+0x000100039fbb)
#6 do_start_x11_server bundle-main.c:436 (X11.bin+0x000100002e25)
#7 _Xstart_x11_server mach_startupServer.c:189 (X11.bin+0x000100004e09)
#8 mach_startup_server mach_startupServer.c:399 (X11.bin+0x0001000056a4)
#9 mach_msg_server mach_msg.c:563 (libsystem_kernel.dylib+0x000000012186)
#10 start <null>:29 (libdyld.dylib+0x000000005254)
SUMMARY: ThreadSanitizer: data race darwinEvents.c:102 in wait_for_mieq_init
==================
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This allows us to remove darwinEvents_lock() and darwinEvents_unlock()
and remove the serverRunning hack from dix
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
AppKit handles crashes on app launch with their own dialog now, so we shouldn't need to do this ourselves.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
The issue was that we set a flag to ignore the k key's up event when sent
the cmd-h down event, but because the cmd-h keycode hides XQuartz, we
became !_x_active by the time the event is delivered which caused us to
go down a differnet codepath rather than getting a chance to ignore it.
We then incorrectly ignored the next h up key.
https://bugs.freedesktop.org/show_bug.cgi?id=92648
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
>From the GLX spec:
"GLX_X_RENDERABLE is a boolean indicating whether X can be used to
render into a drawable created with the GLXFBConfig. This attribute
is True if the GLXFBConfig supports GLX windows and/or pixmaps."
Every backend was setting this to true unconditionally, and then the
core ignored that value and sent true unconditionally on its own. This
is broken for ARB_fbconfig_float and EXT_fbconfig_packed_float, which
only apply to pbuffers, which are not renderable from non-GLX APIs.
Instead compute GLX_X_RENDERABLE from the supported drawable types. The
dri backends were getting _that_ wrong too, so fix that as well.
This is not a functional change, as there are no mesa drivers that claim
to support __DRI_ATTRIB_{UNSIGNED_,}FLOAT_BIT yet.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Now that the enable bits are in the screen base class we can compute
this in one place, rather than making every backend do it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmt:~/git/xserver% git grep -E '\<(index|num_vis)\>' hw/xquartz/GL
hw/xquartz/GL/indirect.c: int index;
hw/xquartz/GL/indirect.c: int num_vis;
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
On xquartz this enables SGI_make_current_read, which is a mostly
harmless lie as CGL doesn't implement it, as well as SGIX_pbuffer, which
is fine because no pbuffer-enabled configs are created.
On xwin this enables SGIX_pbuffer and ARB_multisample in all cases.
Again this is harmless if the backend doesn't support the features,
since no fbconfigs will be created to expose them.
It also adds SGIX_visual_select_group to both xquartz and xwin.
Amusingly, both were filling in the appropriate field in the fbconfig
already.
v2: Warn about missing WGL extensions (Emil)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
CGL doesn't have a way to express this directly, unlike EGL WGL and GLX.
It might be implementable, but it's never actually worked, and it's a
fairly niche feature so we're better off throwing an error if someone
attempts it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This existed only to be strdup'd and then immediately freed.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>