This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL) {
- free(E);
- }
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(note that nearly identical patches were proposed by Kristian and Chris)
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since this code was using CreateScratchGC and not GetScratchGC,
FreeScratchGC would always call FreeGC, so just call it directly.
As long as the drawable provided to CreateGC has the same screen and
depth as were passed to CreateScratchGC, these functions are basically
identical. There are two differences:
- CreateGC gives you a non-null stipple. You probably don't care.
- CreateGC passes the gcid and client to XACE. There are several
internal GCs allocated in the server, and they all pass 0 and
serverClient. I expect XACE will never reject that combination.
The callers of createDrawable all verify that pDraw has the same screen
that driScreen does. In short, this should have no behavioral change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
During a SwapBuffers request, we may end up querying an unknown drawable
outside of an active context, and so need to report this error prior to
attempting to dereference the NULL context.
Also fixes:
[Bug 29184] glXSwapBuffers with no GLX context crashes X.
https://bugs.freedesktop.org/show_bug.cgi?id=29184
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Because some EnterVT code needs to remove it self from the
call chain, we need to fix all of the wrappers to correctly
unwrap/rewrap during the call chain. This is a follow-on to the fix
for bug 27114 in commit 68a9ee8370.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Jesse Barnes <jesse.barnes@intel.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
I built latest server and copied over a mesa 7.8 dri2 driver to use with it,
and it crashed in here starting compiz. Looks like we need to validate the
flush extension is registered before calling invalidate.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace xstrdup with strdup when either constant string is
being duplicated or argument is guarded by conditionals and
obviously can't be NULL
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
I got this wrong in e2929db7b7.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
TryClientEvents already did this; this commit just moves the assignment
one level down so that no event source has to worry about sequence
numbers.
...No event source, that is, except XKB, which inexplicably calls
WriteToClient directly for several events.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just let Dispatch() check for a noClientException, rather than making
every single dispatch procedure take care of it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This lets the DRI2 clients rely on the server to notify them when they
need to get new buffers. Without this, OpenGL clients poll the server
in glViewport() which can be a performance problems and also isn't
completely correct behaviour.
We bump the DRI2 protocol minor to indicate the availability of the
event, which the DRI2 clients can use to avoid polling. This speeds up
various piglit and oglc test cases as well as real applications.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Some pixmaps (window pixmaps and scratch pixmaps) don't have the
drawable->id set and thus DRI2 gets confused when using that field
for looking up the DRI2 drawable. Go back to using privates for getting
at the DRI2 drawable from a DrawablePtr. We need to keep the resource
tracking in place so we can remove the DRI2 drawable when the X resource
it was created for goes away. Additionally, we also now track the DRI2
drawable using a client XID so we can reclaim the DRI2 drawable even if
the client goes before the drawable and doesn't destroy the DRI2 drawable.
Tested-by: Owen W. Taylor <otaylor@fishsoup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
If we use the #define'd version from dri_interface.h, the server will
require at least that version of the extension. If we're compiling against
a dri_interface.h with a newer version we don't really require, glxdri2
will require a too high version of the extension.
The right approach is to just hard-code the version we need instead of
using the #defines.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Now that glx doesn't call DRI2DestroyDrawable anymore, we don't need to
force a specific resource destruction order in the DestroyWindow hook.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
https://bugs.freedesktop.org/show_bug.cgi?id=26394
Signed-off-by: Keith Packard <keithp@keithp.com>
The main motivation here is to have the resource system clean up the
DRI2 drawable automatically so glx doesn't have to. Right now, the
glx drawable resource must be destroyed before the X drawable, so that
calling DRI2DestroyDrawable doesn't crash. By making the DRI2
drawable a resource, GLX doesn't have to worry about that and the
resource destruction order becomes irrelevant.
https://bugs.freedesktop.org/show_bug.cgi?id=26394
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
GLX pbuffers are implemented using a pixmap allocated by the server.
With the change to DRI2 to track DRI2 drawables as resources, we need to make
sure that every drawable we create a DRI2 drawable for has an XID. By
using the XID of the pbuffer, the resource system will automatically
reclaim the hidden pixmap and the DRI2 drawable when the pbuffer is
destroyed or the client exits.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This ensures that the DrawableGone callback gets called as necessary
when the X drawable goes away. Otherwise, using a GLX drawable
(say, glXSwapBuffers) in indirect mode after the X drawable has been
destroyed will crash the server.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
They've been implemented for a while, but we never advertised them. All we
need to do is set the GLX_PBUFFER_BIT in the drawable type fbconfig
field when we're using DRI2.
https://bugs.freedesktop.org/show_bug.cgi?id=26581
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Export DDX swap control status from the DRI2 module and check for it in
GLX when initializing extensions.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This should fix bug #3539.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We broke the __DRI2_FLUSH API since it was never released, but since it's
taking a little longer than expected to get the X server side of the changes
ready, fix things up so it compiles.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The problem fixed by this patch can be reproduced on Linux with the
following steps.
- Access NULL pointer intentionally in ProcessOtherEvent on key press.
- Instead of saving core dump to a file, write it into a pipe.
echo "|/usr/sbin/my-core-dumper" > /proc/sys/kernel/core_pattern
- Dump the core by pressing a key.
While the core is being dumped into the pipe, the smart schedule timer
will cause a pending SIGALRM. Linux kernel stops writing data to the
pipe when there are pending signals. This causes the core dump to be
truncated. On my system I'm expecting a 6 MB dump but the size will be
60 kB instead. The problem is solved if we block the SIGALRM caused by
expired smart schedule timer.
I haven't been able to reproduce this problem in the following cases.
- Save core dump to a file instead of a pipe.
- kill -SEGV `pidof Xorg`
- Press a key to dump core while gdb is attached to Xorg.
- Give option -dumbSched to Xorg.
Also note that the fix works only when NoTrapSignals has the default
value FALSE. The problem can still be reproduced if error signals
aren't trapped. In addition to pending SIGALRM, there is a similar
problem with pending SIGIO from the keyboard driver during core dump.
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Clients would have received swap events regardless of asking for it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Sun cc 5.9 and later (__SUNPRO_C >= 0x590) support __attribute__
calls for aligned, always_inline, noinline, pure, const, and malloc.
This commit consists of the related updates to files that were
regenerated by gl_XML.py in mesa after adding the __SUNPRO_C checks to it
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
This allows clients to easily check for swap completion status in their
main loop.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make sure to check return value before setting bitmask flags.
For most calls, just fails to init the extension. Since Xinput
already calls FatalError() on initialization failure, so does
failure to allocate Xinput's resource type.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Previously DLOPEN_LIBS was managed in top-level configure.ac.
Instead bundle it with the code using dl*() functions to
avoid breakages in uncommon configurations.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
- Don't warn for references to deprecated functions in xorg_symbols.
- Ignore functions generated by gl_apitemp.py that are never used.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
On 64-bit systems, int and pointers don't have the same size, so GCC gives
warnings about casts between int and pointer types. However, in the cases
covered by this patch, it's always a value that fits in int being stored
temporarily as a pointer and then converted back later, which is safe.
Casting through the pointer-sized integer type intptr_t convinces the
compiler that this is OK.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
In both functions, "answer" was uninitialized if "compsize" was 0, but in
that case __GLX_SEND_VOID_ARRAY(compsize) results in a call to
WriteToClient for 0 bytes, which returns immediately without examining the
"answer" argument. So initializing to a null pointer is as good as
anything else.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The previous code was copied and in both cases incorrectly fixed
up the colormaps after resizing the visuals, this patch consolidates
the visual resize + colormaps fixups in one place. This version
also consolidates the vid allocation for the DepthPtr inside the
function.
I'm not 100% sure colormap.[ch] is the correct place for this but
visuals are mostly created in fb and I know thats not the place to
be resizing them.
Fixes fd.o bug #19470.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Return the minimum GLX version supported by all screens. Assume that
DRI2 screens have all the required features for GLX 1.4. Assume that
everyone else can only support GLX 1.2.
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
Clears warnings about obsolete headers, but raises minimum
required version of xf86driproto to 2.1.0
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
OMG stab stab stab, YALL.
removal function was made of crack, actually truncated the list from
the one after the find point.
However fixing this makes glean makecurrent fail with a GLX error.
This change implements the protocol for DRI2GetBuffersWithFormat, but
the bulk of the differences are the changes to the extension / driver
interface to make this function work. The old CreateBuffers and
DeleteBuffers routines are replaced with CreateBuffer and DeleteBuffer
(both singular).
This allows drivers to allocate buffers for a drawable one at a time.
As a result, 3D drivers can now allocate the (fake) front-buffer for a
window only when it is needed. Since 3D drivers only ask for the
front-buffer on demand, the real front-buffer is always created. This
allows CopyRegion impelemenations of SwapBuffers to continue working.
As with previous version of this code, if the client asks for the
front-buffer for a window, we instead give it the fake front-buffer.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
When a drawable goes away, we don't destroy the GLX drawable in full,
since it may be current for a context. This means that when the drawable
is destroyed in full later, the backend doesn't get a chance to
destroy resources associated with the drawable (the DRI2Drawable).
With this patch, we destroy the GLX drawable in full when it goes away
and then track down all contexts that reference it and NULL their
pointers.
The number of buffers is likely to change in the future, so having
this as a define is the right way to go.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
With trying to match depths so that you didn't end up with a depth 24
fbconfig for the 32-bit composite visual, I broke the alpha bits on the depth
24 X visual, which angered other applications. But in fixing that, the
pickFBconfigs code for "minimal" also could end up breaking GLX visuals if
the same FBconfig was chosen for more than one X visual.
We have no reason to not expose as many visuals as possible, but the old
"all" mode didn't match any existing X visuals to GLX visuals, so normal
GL apps didn't work at all.
Instead, replace it with a simple combination of the two modes: Create GLX
visuals by picking unique FBconfigs with as many features as possible for
each X visual in order. Then, for all remaining FBconfigs that are
appropriate for display, add a corresponding X and GLX visual.
This gets all applications (even ones that aren't smart enough to do FBconfigs)
get all the options to get the visual configuration they want. The only
potential downside is that the composite ARGB visual is unique and gets a
nearly full-featured GLX visual (except that the root visual might have taken
the tastiest FBconfig), which means that a dumb compositing manager could
waste resources. Write compositing managers using FBconfigs instead, please.
Add parenthesis around the whole expression.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Using GL for the PKG_CHECK_MODULES identifier multiple times means only
the first call will actually be used. Later calls will be skipped due to
GL_CFLAGS and GL_LIBS already being set. This changes DRI to using a
different identifier and DMX to just reusing GL_CFLAGS.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
If the GL dispatch table pointer points to glapi_noop_table,
(due to some kind of GL initialization failure), DoGetString(GL_VERSION)
(for example as invoked by glxinfo) will crash as it tries to
do atof() on the null pointer returned by the noop dispatch function
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Several recent Mesa commits (listed below) make modifications to the
protocol generator data and scripts. This commit represents the
changes to the generated files resulting from the previous changes.
- 0f73302d24f4201813da2939742c5bcb6964b3b1
GLX: Fix protocol for glTexSubImage#D
- 1709ab01ef24279c782e420568e9257b4b92b224
Return 0 as the request size when the pixels parameter is NULL
- 63cca2ba10ce7dcc8481cfa4be3872dfc269dded
GLX: Include glapi.h before glapitable.h
This is the server-side part of the fix for bugzilla #11003.
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>