Throughout the xserver git history, the generic portion of the int10
module has always used other methods for reading the video BIOS. For
some time now it's been purely libpciaccess based. This commented-out
use of xf86ReadBIOS is entirely superfluous.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This is the last mention after ccfaf82367
quit using the variable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tiago Vignatti posted an identical patch in June 2010, which I only
noticed after getting the above reviews. His patch was:
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Patch produced with:
unifdef -UNO_INLINE -B
This change isn't relevant to the similar code in
hw/xfree86/common/compiler.h, because x86emu is expected to someday move
out of xserver entirely and so should not depend on any xserver headers.
Also, some platforms apparently do have NO_INLINE versions of
compiler.h.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The memcpy fast path implicitly assumes that the copy walks
left-to-right. That's not something memcpy guarantees, and newer glibc
on some processors will indeed break that assumption. Since we walk a
line at a time, check the source and destination against the width of
the blit to determine whether we can be sloppy enough to allow memcpy.
(Having done this, we can remove the check for !reverse as well.)
On an Intel Core i7-2630QM with an NVIDIA GeForce GTX 460M running in
NoAccel, the broken code and various fixes for -copywinwin{10,100,500}
gives (edited to fit in 80 columns):
1: Disable the fastpath entirely
2: Replace memcpy with memmove
3: This fix
4: The code before this fix
1 2 3 4 Operation
------ --------------- --------------- --------------- ------------
258000 269000 ( 1.04) 544000 ( 2.11) 552000 ( 2.14) Copy 10x10
21300 23000 ( 1.08) 43700 ( 2.05) 47100 ( 2.21) Copy 100x100
960 962 ( 1.00) 1990 ( 2.09) 1990 ( 2.07) Copy 500x500
So it's a modest performance hit, but correctness demands it, and it's
probably worth keeping the 2x speedup from having the fast path in the
first place.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Otherwise sys_pitch will be stale when a system memory copy is allocated.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=38322 and a crash when
unlocking the screen with xscreensaver, reported by Janne Huttunen.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Janne Huttunen <jahuttun@gmail.com>
Tested-by: Jan Kriho <Erbureth@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes assertion failure when calling dixSetPrivate
Debian bug#632549 <http://bugs.debian.org/632549>
Reported-and-tested-by: Mohammed Sameer <msameer@foolab.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The composite extension spec says that window background painting
should be inhibited when the subwindow redirection mode is set to
manual.
This eliminates the ugly flashing effect when compiz unredirects a
fullscreen window.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Owen Taylor <otaylor@fishsoup.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This reverts commit db8840600e.
It was an optimization for the resize case, but 193ecc8b45 made
it so that no backfilling takes place on resize if left in.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Conflicts:
composite/compalloc.c
Signed-off-by: Keith Packard <keithp@keithp.com>
RRPostPendingProperties tries to compare the pending and current
property values to decide whether they're actually changing. However,
it does this using a memcmp that passes in pending_value->size as the
number of bytes. This is actually the number of elements, where each
element is (pending_value->format / 8) bytes long. This causes the
pending value to not be propagated if the first pending_value->size
bytes are the same and only the end of it is changing.
Fix this by computing the total number of bytes to compare in the
memcmp.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If config/udev was enabled, this would default to base, which means that
after regen the devices would get the wrong rules, and hilarity would
ensue.
It's probably safe to default to evdev unconditionally on Linux by now.
Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hotplugged devices, xf86AllocateInput does that for us but the xorg.conf
path is different. Since not all drivers reset the fd during PreInit but may
still call close(pInfo->fd) in all cases, this can terminate the logging
early.
Reproducible: add a wacom driver InputDevice section with no Option Device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86ConfigLayout.inputs contains the information from the xorg.conf
file. Passing this into xf86NewInputDevice means the device will get
cleaned up on exit and the pointers in xf86ConfigLayout.inputs are left
dangling. In the second server generation, this results in a server
crash.
Also, rename pDev to pInfo. pDev is pretty much reserved for DeviceIntPtr
types.
Reproducible: AutoAddDevices off and xorg.conf input sections, trigger
server regeneration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices that succeeded during PreInit and DEVICE_INIT but failed in
DEVICE_ON would be deleted through xf86DeleteInput but not removed from the
list of input devices (and not turned off). The result was a double free on
server shutdown.
Fix this by calling RemoveDevice if EnableDevice fails.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The nature of hotplug is that a device we enumerated might already be
gone by the time we look at it, so don't assume otherwise.
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't enumerate/monitor all devices of the system (since that can be
quite a few), but limit our search to devices from the "input"
subsystem, as well as the "tty" subsystem (to cover Wacom tablets).
This should make X start up a bit faster and reduce the number of
unnecessary wake-ups of the X server.
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
udev gives no guarantee that before each "changed" event for a device
there's an "add" event, or that before each "remove" is an "add", or
that before each "add" there was no "add" already and so on. Users can
trigger these events at any time with "udevadm trigger", and netlink is
a lossy transport, hence the events can come in unexpected ordering.
With other words: regardless which event is generated, the X server must
not choke on it and make the best of it, hence make sure that if we get
an "add" event for an existing device we don't add the device a second
time.
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This preference allows users to override the related option in Mac OS X's
Mouse/Trackpad preferences. This effectively lets the user determine
which "context" all of X11 fits into for context-based scrolling until
such API exists within X11 itself to pass along to X11 clients.
This is applicable to Mav OS X 10.7+
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
This occurred to me in hindsight after the last commit. If the
original developer had done this, we would have noticed the
problem sooner.
(cherry picked from commit aa0a57996f)
xp_destroy_surface was called with a surface id of 0, due to some
premature cleanup that set it to 0. This means the surfaces
weren't being destroyed until the window was.
The code that did that was: pDRIDrawablePriv->sid = 0;
In long running applications this leak may or may not have been
harmful. With the old libGL the surfaces weren't destroyed until
the context was destroyed or a new context created. In the new
libGL they are reference counted, and released much sooner, so we
ran into a resource leak more noticeably with some tests.
Make the Apple DRI code dispatch events to the client(s) for
destroyed surfaces, when a resource is destroyed. This seems to
work in my tests, however this clearly wasn't working for a while,
so bugs may result in the future if it enables some new (unexpected)
side effects.
Also add a few helpful comments to aid in understanding the code
in the future.
Tested with the test suite, Pymol, and various Mesa demos.
(cherry picked from commit bede83eb19)
This way we'll print an error and still mostly work rather than crashing if
someone installs XQuartz.app incorrectly or tries running the server within
the build system rather than the installed system.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Bugfix for broken xkbcomp: if we encounter an XFree86Private action with
Any+AnyOfOrNone(All), then we skip the interp as broken. Versions of
xkbcomp below 1.2.2 had a bug where they would interpret a symbol that
couldn't be found in an interpret as Any. So, an
XF86LogWindowTree+AnyOfOrNone(All) interp that triggered the PrWins
action would make every key without an action trigger PrWins if libX11
didn't yet know about the XF86LogWindowTree keysym. None too useful.
We only do this for XFree86 actions, as the current XKB dataset relies
on Any+AnyOfOrNone(All) -> SetMods for Ctrl in particular.
See xkbcomp commits 2a473b906943ffd807ad81960c47530ee7ae9a60 and
3caab5aa37decb7b5dc1642a0452efc3e1f5100e for more details.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous patch accidentally introduced a hard dependency on
Composite. Sorry, OS X.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reported-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The GLXversion member of the __GLXscreen struct
is just cruft since commit ad5c0d9efa,
when we started returning the minimum GLX version supported by all
of the screens on the display, rather than the maximum version supported
by the server.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Document the -[no]wgl options in the XWin manpage
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Report Window XIDs in Window create/destroy/reparent debug messages
It's actually quite useful if you are trying to corrolate those events
with what a client is doing...
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Add a suitable cast to the generated code for glWinSetupDispatchTable()
so it doesn't generate screeds of warnings
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Handle failure to get any useful pixel formats for GLX fbconfigs
more gracefully: If we didn't get any useful pixel formats from
wglGetPixelFormatAttribivARB(), fall back to using DescribePixelFormat().
If that doesn't give us any useful pixel formats, fallback to software
rendering.
This works around a problem with Intel 845G drivers, where
wglGetPixelFormatAttribivARB() doesn't seem to work as we expect it to...
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
... instead just log if an attempt is made to call a wrapper for
a function which didn't resolve
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>