getevents.c:770:5: warning: suggest parentheses around '&&' within '||'
Introduced with dc57f89959:
- if(dev->u.master && dev->valuator) {
+ if(dev->valuator && IsMaster(dev) || !IsFloating(dev)) {
So I'm assuming the two terms around the || are meant to be a unit.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CARD32 is being returned by GetTimeInMilis(), so use it consistently.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This intends to clean up the predictable accel struct
from purely scheme-related things like input properties,
as they would be useless in other use cases such
as wheel acceleration.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Let the compiler figure out the correct alignment for the axes data
for a valuator by using a union to force double alignment of the
initial ValuatorClassRec structure in the allocation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Testcase:
xinput float <keyboard name>
results in the keyboard's enter key being repeated as the device is detached
while the key is still physically down. To avoid this, release all keys and
buttons before reattaching the device.
X.Org Bug 34182 <http://bugs.freedesktop.org/show_bug.cgi?id=34182>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
When delivering an event to a device grabbed with SyncBoth,
DeliverGrabbedEvent walks the device tree looking for associated devices
to freeze them. Unfortunately, it froze all devices instead of just the
paired device, and the previous fix in 4fbadc8b17 would still break
if the same client had a non-SyncBoth grab on another unrelated master
device.
Fix this by completely ignoring devices that aren't our paired device.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The removal of the double-use will cause some suble bugs as some conditions
to check for the dev->u.master case were broken and also evaluated as true
if lastSlave was set (instead of master).
Also breaks the input ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
We need to check if our master keyboard is the given device since we may be
a pointer with keys and thus need to change the modmap too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
We don't just care about the directly attached master, we care about the
master keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
In some cases, we don't know/care whether we want the master pointer or keyboard
for a device. Add a new type MASTER_ATTACHED to return the master this
device is attached to.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
This is not a straightforward search/replacement due to a long-standing
issue.
dev->u.master is the same field as dev->u.lastSlave. Thus, if dev is a master
device, a check for dev->u.master may give us false positives and false
negatives.
The switch to IsFloating() spells out these cases and modifies the
conditions accordingly to cover both cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
GetMaster() returns NULL for floating slaves.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
For all but motion and proximity events, having no valuators is ok.
Regression from 1.9, keyboard events are not converted to protocol events.
X.Org Bug 34510 <http://bugs.freedesktop.org/show_bug.cgi?id=34510>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This makes it possible to init a scheme in one init call, so we
get rid of the tightly coupled two-phase init used before.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some event types (notably Expose and GraphicsExpose) require multiple
events, a la XI 1.x. Bring the EventToCore API in line with EventToXI's
and allow it to generate multiple events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of switching on the event filter to determine delivery, use the
event type instead.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rename the return mask values for EventIsDeliverable:
* CORE_MASK -> EVENT_CORE_MASK
* XI_MASK -> EVENT_XI1_MASK
* XI2_MASK -> EVENT_XI2_MASK
* DONT_PROPAGATE_MASK -> EVENT_DONT_PROPAGATE_MASK
And don't undef them in dix/events.c, since they're supposed to be
global.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckDeviceGrabs will activate a passive grab for KeyPress and
ButtonPress events. GrabInfoRec::activatingKey contains the keycode
which activated the passive grab, so we can deactivate it later in
ProcessOtherEvents.
Previously, CheckDeviceGrabs relied on its callers to set
activatingKey, which not all callers were doing (I'm looking at you,
ComputeFreezes). Just set it in CheckDeviceGrabs instead.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is clearly meant to short-circuit the (modestly) expensive resource
lookup in LegalNewID. The problem is that long-lived clients will
eventually run completely through their XID space and start asking
XC-MISC for IDs to reuse. Once that happens, the comparison against
expectID will always be true, and we'll no longer catch XID collisions
at all.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Expecting the caller to free the mask requires us to keep it in a single
memory block (which may be an issue lateron), aside from leaving the API
asymetrical. Provide valuator_mask_free() to free the memory and reset the
mask pointer to NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The code to set sync.other in DeliverGrabbedEvents is supposed to reset
sync.other for a paired MD to the grab under consideration, but was
rather optimistic in resetting sync.other for _all_ devices.
This would fall apart given two sets of MDs (A paired with B, Y paired
with Z), where both MDs were in FREEZE_BOTH_NEXT_EVENT due to being
called with SyncBoth, where no event had yet triggered the grab. An
event being processed on MD A would result in B, Y and Z all having
sync.other set to A's grab, rather than just B.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Change CheckPassiveGrabsOnWindow to return the GrabPtr it used (or NULL
if none) rather than a boolean, and export it. Also add an additional
boolean 'activate' parameter; use TRUE for existing behaviour, or FALSE
to only find the grab and then return it.
This will be used in forthcoming touch patches to find the grabs, rather
than open-coding same.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make it non-static, add to headers.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Don't try to search for an Xi 1.x grab in CheckPassiveGrabsOnWindow for
events with no Xi 1.x equivalent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
XYToWindow calculates the position of the cursor and updates the sprite
trace, but does nothing else with the device. Pass a SpritePtr instead
so we can update an alternate focus instead of hardcoding the device's
sprite. Also make this function non-static, so we can use it elsewhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Since FixUpEventFromWindow only uses the sprite trace to determine the
window stack, pass in a sprite instead of hardcoding the device sprite,
so we can deliver to windows other than the one currently containing the
sprite.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
GetCurrentRootWindow already works for the device case, although not as
an lvalue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Rename compUpdateWindow to compPaintWindowToParent and split the child
walk to compPaintChildrenToWindow. Calling compPaintChildrenToWindow
allows an arbitrary subtree to be updated, instead of having to update
all the windows. This will be used to make sure all the descendants are
copied to the parent when the parent window contents need to be accessed
in IncludeInferios sub-window mode.
WindowRec has a new member 'damagedDescendants' that is used to keep
track of which subtrees need updating. When a window is damaged,
'damagedDescendants' will be set for all the ancestors, and when a
subtree is updated, the tree walk can be stopped early if no damaged
descendants are present.
CompScreenRec no longer needs the 'damaged' member since the root
window's 'damagedDescendants' provides the same information.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This enables us to reliably inspect properties when destroying windows.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Will be used outside dix/events.c in proceeding XI 2.1 MT changes.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition of rClient was duplicated across three source files, so
move it to resource.h.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
An interface is provided for figuring out the PID and process name of
a client. Make some existing functionality from SELinux and IA
extensions available for general use.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This was introduced in 3ab6cd31cb. Mea
culpa. This logic is still incorrect [1], but at least it's less
incorrect.
[1] - https://bugzilla.redhat.com/658587
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Add a few checks for the existence of a valuator class on the device to
avoid null-pointer dereferences for button events from devices without a
valuator class.
X.Org Bug 21457 <http://bugs.freedesktop.org/show_bug.cgi?id=21457>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, just improves readability. This statement had things
added to/removed from it for a few server releases while the input event
queue was revamped. What made sense once is now mainly confusing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
As pointed out by Jamey Sharp (again), the logic is faulty: --warn is
always going to be false. Replace it with warn-- accordingly, so that
there's (at least, but also only) one warning showing up.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
As pointed out by Jamey Sharp: “the result pointer is already guaranteed
to be NULL if the return value is not Success”, so get rid of the
variable used to catch the return value, and used in a ternary operation
to decide whether to return the pointer or NULL. Always return the
result pointer instead.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
-Add fence sync objects
-Add fence sync devPrivates
-Add a X sync module screen private
-Add wrappable functions to create and destroy
fence sync objects
-Give fence sync objects wrappable functions to
trigger, test, and reset their 'triggered' value.
-Give fence sync objects wrappable functions to
notify driver when adding/removing triggers to/
from the sync object.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
XI 1.x events still contain absolute coordinates anyway. By the time we get
to the InternalEvent to XI event conversion, the valuators are already
absolute.
Stopping because of a different mode on a valuator is not necessary.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Performing bit-wise operations on a boolean amounts to mixing types,
is confusing and basically incorrect; one should only perform
logical operations on booleans.
Performing such operations relies on the implementation detail
that a boolean is in fact an integer and that its value FALSE
is implemented as zero.
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The macro has been changed to do this already, no need for double
not-not-ing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
valuator_mask_size() returns the highest valuator set as opposed to the
number of set bits (which obviously changes as we unset valuators).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't stop processing events when a valuator's mode doesn't match the 0th
valuator's mode. Instead, start with the first_valuator in the event and
keep stacking them on until the first valuator with a different mode is hit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
The DeviceEvent's mode field is a set of bits for each valuator, not bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This check was missing the OutOfProximity mask and resulted in the wrong
bits being set in InternalEvents.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
transformAbsolute must use old values if valuator mask doesn't have new
ones, and it must only set new values if there was a change.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead always paint root tiled (-retro like), protocol calls
(XSetWindowBackgroundPixmap and related) should behave accordingly when None
and ParentRelative is set as background pixmap.
It follow what the protocol states: "changing the background of a root window
to None or ParentRelative restores the default background pixmap".
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
It lets the driver notify the server whether it can draw a background when
'-background none' option is used by the system platform. Use cases for that
could be video drivers performing mode-setting in kernel time, before X is up,
so a seamless transition would happen until X clients start to show up.
If the driver can copy the framebuffer cleanly then it can set the flag
(canDoBGNoneRoot), otherwise the server will fallback to the normal behaviour.
The system must explicit indicates willingness of doing so through
'-background none'. We could do this option as default; in such case,
malicious users would be able to steal the framebuffer with a bit of tricks.
For instance, I can see the content of my nVidia Quadro FX 580 framebuffer
old X session modifying a bit nv driver:
xf86DPMSInit(pScreen, xf86DPMSSet, 0);
- /* Clear the screen */
- if(pNv->xaa) {
- /* Use the acceleration engine */
- pNv->xaa->SetupForSolidFill(pScrn, 0, GXcopy, ~0);
- pNv->xaa->SubsequentSolidFillRect(pScrn,
- 0, 0, pScrn->displayWidth, pNv->offscreenHeight);
- G80DmaKickoff(pNv);
- } else {
- /* Use a slow software clear path */
- memset(pNv->mem, 0, pitch * pNv->offscreenHeight);
- }
+ pScreen->canDoBGNoneRoot = TRUE;
The commit is originally based on discussions happened on xorg-devel:
http://lists.freedesktop.org/archives/xorg-devel/2010-June/009755.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Acked-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Protocol doesn't mention about screen saver with logo being required and
people are already using more intelligent ways to draw screen saver themes. So
consider -logo as deprecated option, deleting its code.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL) {
- free(E);
(
- E = NULL;
|
- E = 0;
)
- }
+ free(E);
+ E = NULL;
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously the OutOfProximity bit in the valuator mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
XI1 doesn't cater for mixed mode devices, so bail out on the first valuator
that has a different mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Returns the mode of the specified valuator.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
We only skip relative events for proximity, not absolute ones. Now with
mixed mode, just unset those axes that are relative.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
With the switch to masks internally, this isn't needed anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The valuators are stored inside the mask, use it from there. are stored
inside the mask, use it from there. are stored inside the mask, use it from
there. are stored inside the mask, use it from there.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Function to count the number of bits set in the given array.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Without this patch, any negative valuator value is wrong when returned
from XQueryDeviceState(). This is a regression from at least xserver
1.4.
Valuator data is set in dix/getevents.c:set_valuators() by copying
signed int values into an unsigned int field
DeviceEvent.valuators.data.
That data is converted into a double with an implicit cast by
assignment to axisVal[i] in Xi/exevents.c:UpdateDeviceState().
That double is converted back to a signed int in
queryst.c:ProcXQueryDeviceState(). If the original value in
set_valuators() is negative, the double value will be > 2^31 and the
conversion back to a signed int is undefined. (Although I
consistently see the value -2^31.)
Fix this by changing the definition of DeviceEvent.valuators.data from
uint32_t to int32_t.
Signed-off-by: Joe Shaw <joeshaw@litl.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All these now generate InternalEvents, point this out. Remove XKB/XI
references, that's just confusing. This comment referred to the old-style
event generation code from server 1.4 to including 1.6 but is now just
confusing to newcomers.
Remove comment about SwitchCoreKeyboard() for the same reason.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Move the basic sanity checking to an inline wrapper, which avoids the
function call overhead if the callback list is empty. On an XACEful
server on a 2.4GHz Core 2 Duo:
1 2 Operation
-------- ----------------- -----------------
20000000.0 25100000.0 ( 1.25) X protocol NoOperation
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Drop DRAWABLE_BUFFER and related checks, mbuf was the only thing that
used them and it was killed in 0ba82562.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
This just simplifies ComputeFreezes, eliminating some duplicated code
and a goto.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckPassiveGrabsOnWindow returns FALSE if pWin->optional is NULL,
because wPassiveGrabs uses wUseDefault, so don't bother checking at the
caller.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CheckDeviceGrabs checked all the ancestors of the window containing this
device's pointer even if no new grabs could possibly apply due to the
device already being grabbed.
ActivateFocusInGrab and ActivateEnterGrab already checked whether they
should break an existing grab, and then set up an event that was
completely ignored if they didn't actually break the grab.
In both cases, just do what we would have done eventually anyway--return
FALSE from CheckPassiveGrabsOnWindow's caller--but do it sooner.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some functions had to be moved around due some missing static definitions.
Another minor clean up like inexistent function declarations and etc were made
also.
Part of this patch was cooked using:
sed -i -e '/static DISPATCH_PROC*.*;/d' `git ls-files`
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This replaces dixCreatePrivateKey and the only uses, which were in
midispcur.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The server and drivers sometimes use GetScratchGC, but never
CreateScratchGC.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The SELinux extension does store a security label in the screen
devPrivates. Fixes crash caused by overwriting another private.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reported-by: Justin Mattock <justinmattock@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Selection objects were not being allocated with privates, and both
objects had a stray statement that zeroed out the devPrivates field.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reported-by: Justin Mattock <justinmattock@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
CurrentTime is used by clients to skip setting the time, but not by the
server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If the master does not have a button class, recalculating the number of
buttons required for this master dereferences a NULL pointer. Guard against
this, if the master pointer doesn't have a button class, it doesn't need to
update it's number of buttons.
Reproducible:
Two devices on the same master, device NB with axes but no buttons, device
A+B with axes and button .
If NB was the last one to send an event through the master when A+B is
removed from the server, master->button is NULL and leads to the above
NULL-pointer dereference.
X.Org Bug 29669 <http://bugs.freedesktop.org/show_bug.cgi?id=29669>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Right now, Xephyr and others don't get to use XKB on the slave devices.
Which works given that no-one cares about SDs just yet but event processing
is different if the ProcessInputProc isn't wrapped properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
max_keys_per_mod equal to zero is a valid situation so generate_modkeymap
should not return BadAlloc in this case.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Patrick E. Kane <pekane52 at gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Devices that send motion events with valuators other than x/y get core
motion events with unchanged x/y coordinates. This confuses some
applications.
If the DeviceEvent does not have the x/y valuators set, return BadMatch on
core conversion, thus skipping the event altogether.
Reported-by: Bartosz Brachaczek <b.brachaczek@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Bartosz Brachaczek <b.brachaczek@gmail.com>
GPE and friends modify the valuators array passed in. Which means any driver
using e.g. xf86PostButtonEventP(..., valuators) twice to emulate a button
click will provide garbage data on the second run.
This is currently affecting the wacom driver, xf86PostButtonEventP() with
valuators is required to have input events with device-specific axis values.
Passing the same valuators in twice, once with press, once with release,
will see the valuators modified in the first call and garbage submitted in
the next one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
From: Dave Airlie <airlied@linux.ie>
We were seeing a crash in the FreeAllResources codepath,
running valgrind revealed this,
==12536== Invalid read of size 4
==12536== at 0x810BCAB: DeliverPropertyEvent (rrproperty.c:33)
==12536== by 0x80958A4: TraverseTree (window.c:227)
==12536== by 0x809593E: WalkTree (window.c:255)
==12536== by 0x810BC66: RRDeliverPropertyEvent (rrproperty.c:53)
==12536== by 0x810BD5D: RRDeleteProperty.clone.0 (rrproperty.c:76)
==12536== by 0x810BD98: RRDeleteAllOutputProperties (rrproperty.c:88)
==12536== by 0x810A36E: RROutputDestroyResource (rroutput.c:407)
==12536== by 0x808DF4E: FreeClientResources (resource.c:859)
==12536== by 0x808E005: FreeAllResources (resource.c:876)
==12536== by 0x8062300: main (main.c:305)
==12536== Address 0x46ba8ac is 4 bytes inside a block of size 164 free'd
==12536== at 0x40057F6: free (vg_replace_malloc.c:325)
==12536== by 0x8087F1F: _dixFreeObjectWithPrivates (privates.c:357)
==12536== by 0x809832A: DeleteWindow (window.c:926)
==12536== by 0x808DF4E: FreeClientResources (resource.c:859)
==12536== by 0x808E005: FreeAllResources (resource.c:876)
==12536== by 0x8062300: main (main.c:305)
Its a use after free on the root window, since we have already deleted it
at this point. This patch checks if the window we are destroying is the root
window and resets the pointer to NULL if it is.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dave Airlie <airlied@redhat.com>
None of them do anything useful now that pointer acceleration is
entirely handled in the server. (Does not completely nuke yet,
since that would be an API/ABI break.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
commit 1432785839
xkb: release XTEST pointer buttons on physical releases. (#28808)
revealed a bug with the XTEST/PointerKeys interaction.
Events resulting from PointerKeys are injected into the event processing
stream, not appended to the event queue. The events generated for the fake
button press include a DeviceChangedEvent (DCE), a raw button event and the
button event itself. The DCE causes the master to switch classes to the
attached XTEST pointer device.
Once the fake button is processed, normal event processing continues with
events in the EQ. The master still contains the XTEST classes, causing some
events to be dropped if e.g. the number of valuators of the event in the
queue exceeds the XTEST device's number of valuators.
Example: the EQ contains the following events, processed one-by-one, left to
right.
[DCE (dev)][Btn down][Btn up][Motion][Motion][...]
^ XkbFakeDeviceButton injects [DCE (XTEST)][Btn up]
Thus the event sequence processed looks like this:
[DCE (dev)][Btn down][Btn up][DCE (XTEST)][Btn up][Motion][Motion][...]
The first DCE causes the master to switch to the device. The button up event
injects a DCE to the XTEST device, causing the following Motion events to be
processed with the master still being on XTEST classes.
This patch post-fixes the injected event sequence with a DCE to restore the
classes of the original slave device, resulting in an event sequence like
this:
[DCE (dev)][Btn down][Btn up][DCE (XTEST)][Btn up][DCE (dev)][Motion][Motion]
Note that this is a simplified description. The event sequence injected by
the PointerKeys code is injected for the master device only and the matching
slave device that caused the injection has already finished processing on
the slave. Furthermore, the injection happens as part of the the XKB layer,
before the unwrapping of the processInputProc takes us into the DIX where
the DCE is actually handled.
Bug reproducible with a device that reports more than 2 valuators. Simply
cause button releases on the device and wait for a "too many valuators"
warning message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
When doing Xinerama, we'll dispatch font ops across all backend screens.
If using a font server (such that some operations can sleep), we'll put
the client to sleep once for each screen, but only wake up once, because
we're trying to keep track of the sleep count in _each_ screen's
closure.
Instead, just ask the core whether the client is already asleep.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The current core enter/leave does not cater for device grabs during
enter/leave events. If a window W contains a pointer P1 and a client grabs a
pointer P2, this pointer will not generate enter/leave events inside this
window.
Hack around this by forcing grabbed devices to always send enter/leave
events.
X.Org Bug 27804 <http://bugs.freedesktop.org/show_bug.cgi?id=27804>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Same as the matching key functions. Buttons, like keys, can have two states
for down/up - one posted, one processed. Posted is set during event
generation (usually in the signal handler). Processed is set during event
processing when the event queue is emptied and events are being delivered to
the client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Initializing the dev privates code after allocating the server client
dev privates would cause the memory leak check to fire at server
startup or reset.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Behaviour of earlier X servers was to deliver the ButtonPress event
unconditionally, regardless of the actual event mask being set. Thus, a
GrabButton event will always deliver the button press event, a GrabKey
always the key press event, etc. Same goes for XI and XI2.
Reproducible with a simple client requesting a button grab in the form of:
XGrabButton(dpy, AnyButton, AnyModifier, win, True, ButtonReleaseMask,
GrabModeAsync, GrabModeAsync, None, None);
On servers before MPX/XI2, the client will receive a button press and
release event. On current servers, the client receives only the release.
Clients that expect the press event to be delivered unconditionally may
leave the user with a stuck grab.
XTS test results for XGrabButton are identical with and without this patch.
This reverts commit 48585bd1e3.
Conflicts:
dix/events.c
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Behaviour of earlier X servers was to deliver the ButtonPress event
unconditionally, regardless of the actual event mask being set. This is
documented in the protocol:
"This request establishes a passive grab. In the future, the pointer is
actively grabbed as described in GrabPointer, the last-pointer-grab time is
set to the time at which the button was pressed (as transmitted in the
ButtonPress event), and the ButtonPress event is reported if all of the
following conditions are true:
<list of conditions, event mask is not one of them>"
Thus, a GrabButton event will always deliver the button press event, a
GrabKey always the key press event, etc. Same goes for XI and XI2.
Reproducible with a simple client requesting a button grab in the form of:
XGrabButton(dpy, AnyButton, AnyModifier, win, True, ButtonReleaseMask,
GrabModeAsync, GrabModeAsync, None, None);
On servers before MPX/XI2, the client will receive a button press and
release event. On current servers, the client receives only the release.
Clients that expect the press event to be delivered unconditionally.
XTS Xlib13 XGrabButton 5/39 now passes.
This reverts commit 48585bd1e3.
Effectively reverts commit 1c612acca8 as well,
the code introduced with 1c612 is not needed anymore.
Conflicts:
dix/events.c
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
X server doesn't need to understand fpe internals, so use
register_fpe_functions from libXfont.
It's required to get new version of libXfont, therefore adjust it to be passed
to autoconf.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace xstrdup with strdup when either constant string is
being duplicated or argument is guarded by conditionals and
obviously can't be NULL
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Keys need to persist through server reset so that the private system
can be cleaned up in dixResetPrivates. In particular, this means that
keys cannot live in objects freed at reset time. This API provides
suitable object lifetime by having the privates code free the key in
the reset path.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Each key now declares which object type it belongs to, this permits
keys for different types to share the same offset within the allocated
privates. As a special case for XSELinux, a key may be allocated as
PRIVATE_XSELINUX which will allow it to continue to be used across the
relevant object types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>