Previously it is possible that creating rotation data, then cleaning
up and creating again so that pScreen->BlockHandler and
xf86_config->BlockHandler all point to xf86RotateBlockHandler.
See bug #19343.
All symbols in installed sdk headers should be explicitly tagged
as exported symbols. Otherwise, to ensure it is not a mistake, one
could write it as something like:
extern /* NOEXPORT */ type name ...;
but the proper procedure really should be to use a non sdk header
(or a "noinst_" one).
This patch also removes prototypes to some functions that existed
only temporarily.
- Example: mode 1280x1024, panned area 1281x1024
panned_area.x2 = 1281
mode.width = 1280
If you substract 1280 from 1281, then that leaves you with one.
Which is the one pixel that you need to move to actually see the last pixel collumn.
Substracting 1 from this will consistently prevent you from seeing the right and bottom edge.
- Add active field to crtc.
- Set gamma (only) whenever a crtc becomes active.
- Check for xf86_config being NULL.
- Increase crtc abi to 3.
- A few other fixes.
- The Gamma values from the monitor section are now used during initial config.
- The old colormap system is disabled when gamma set hook is available.
- Gamma values are now persistent for the lifetime of the xserver.
- This requires no driver changes and should be driver ABI compatible.
When a driver uses a crtc during device detection, the scrn has not yet been
configured and virtualX/virtualY are still zero. This caused the X server
to try and allocate a shadow frame buffer, which couldn't work.
Detect this by checking for zero virtualX/virtualY values.
Signed-off-by: Keith Packard <keithp@keithp.com>
pScreen->width/height are not initialized when doing initial mode setting,
which makes this function incorrectly fail. Using scrn->virtualX should work
in all cases though.
Bug 19017 reports a crash in xf86CrtcSetModeTransform when doing a modeset
for output probing, long before the screen array is initialized; that was
caused by a work-around to set pScreen->width/height so that xf86CrtcFitsScreen
could find the right values.
Signed-off-by: Keith Packard <keithp@keithp.com>
The shadow frame buffer and other data used for rotation need to be freed
when the crtc is disabled, not just when rotation is disabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
The attribute should be set on header files to make it easier to
manage what symbols are available to modules.
_X_EXPORT should be used in sources only for special cases, like
symbols that must be visible by non video/input driver/modules but
should not be "advertised" in the sdk.
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Also, no need to call ShowCursor when SetCursorPosition already does it
Based on a previous patch by Maarten Maathuis
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
This patch exports all symbols required by the compilable
(in a x86 linux computer) xorg/driver/* modules.
Still missing symbols worth mentioning are:
sunleo
miFindMaxBand no longer available
intel (uxa/uxa-accel.c)
fbShmPutImage no longer available (and should have been static)
mga
MGAGetClientPointer (should come from matrox's libhal)
This is not a definitive "visibility" patch, as all it does is to
export missing symbols, but the modules that current don't compile,
may require more symbols once fixed, and third party drivers should
also require more symbols exported.
A "definitive" patch should export symbols defined in the sdk.
pixman 0.13.2 now holds all of the matrix operations. This leaves
the protocol conversion routines and some ABI stubs in place
Signed-off-by: Keith Packard <keithp@keithp.com>
Includes fixes for:
"xf86Config.c", line 2434: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 312: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "../../../hw/xfree86/common/xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 438: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
"xf86Modes.c", line 701: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
Doing projective transforms required repositioning the cursor using the
hotspot, but that requires relocating the upper left corner in terms of said
hotspot.
Instead of using a separate function to notify DIX about transform changes,
add the transform to RRCrtcNotify so that the whole Crtc state changes
atomically.
RandR matrix computations lose too much precision in fixed point;
computations using the inverted matrix can be as much as 10 pixels off.
Convert them to double precision values and pass those around. These API
changes are fairly heavyweight; the official Render interface remains fixed
point, so the fixed point matrix comes along for the ride everywhere.
Add APIs to xf86RandR12 support and randr extension to record whether the
driver supports transforms, report that value in the RRGetCrtcTransform
reply.
New RRCrtcGetTransform function in DIX that DDX can use to get the pending
transform. The DDX code should be complete; the DIX code is just a stub at
this point.
Drivers that care about crtc positions on the screen to ensure that vblank
works correctly need to be notified when crtcs are changed.
Provide a hook in the mode setting code that is invoked whenever any
configuration is done to the screen.
Use this new hook in the DRI code so that DRI clients are notified and
receive updated information.
Signed-off-by: Keith Packard <keithp@keithp.com>
When a user specifies the position of an output for which no modes exist
(for whatever reason) assume that the width and height of this output
is 0. The result will be the same as if this output isn't taken into
consideration at all and thus should be sane. It will prevent a segfault
when trying to determine the width and height of a non-existent mode.
- Redo damage naming for more consistency.
- Call post submission functions only where appropriate.
- EXA can now live without it's odd damage workarounds.
- Use a single common function to compute reducedness.
- Call it from both the old-school and new-school mode validation paths.
- Define monitor reduced-blanking support in accord with EDID 1.4.
- Attempt to filter RB DMT modes away from the "standard" EDID pool if
the monitor doesn't claim RB support.
On some panels you end up with all of:
- No range descriptor
- No description of physical connectivity
- Native panel size mode in standard timings list
In principle you're supposed to use the timings for that mode from the DMT
spec, but in practice the DMT spec has timings for both 1920x1200 normal
and 1920x1200RB, and the standard timing field gives you no way to
distinguish. And, of course, the non-RB timings don't fit in a single
DVI link.
In the single output enabled case we never enter the loop and test
never gets set and so we fail to match a good mode.
This was causing my 2560x1600 to end up at 2048x1536.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
If the monitor isn't reduced-blanking (either through EDID logic, or
config file setting), then remove RB modes from the default pool. Any
RB modes from the driver and config file pools will stick around though;
you asked for them, you got them.
The first guess used to be "is the preferred mode for one output the
preferred mode on all outputs". Instead, do "find the largest mode that's
preferred for at least one output and available on all outputs".
Old logic was just the first one that happened to have an associated
CRTC. The new logic tries to find one that's definitely connected, has
probed modes, and has the largest candidate mode.
LeaveVT/EnterVT cycles will free/realloc shadow frame buffers. Because of
this, the presense/absence of that data is insufficient to know whether
the screen function wrappers are necessary. Instead, the 'transform_in_use'
flag should be used.
This patch also adds 'xf86RotateFreeShadow' for drivers to use at LeaveVT
time to free the rotation data; it will be reallocated on EnterVT.
This patch (and not setting HARDWARE_CURSOR_BIT_ORDER_MSBFIRST on big endian
platforms) fixes it for me with the radeon driver and doesn't break intel.
Correct patch this time :)
