If the originating mode didn't have a name, we would end up with the name of
the original mode being setup correctly, but with the name of the copy still
being NULL.
Instead of removing the preference bit marking the hardware declared mode
preference, leave it in place and just move the user preferred mode to the
front of the list while marking it with the USERPREF bit which will cause it
to be selected by the initial mode selection code.
A lot of EDID writers apparently end up stuffing centimeters (like the
maximum image size field) into the detailed timings, instead of millimeters.
Some of them only get it wrong in one direction. Also, add a quirk to let
us mark the largest 75hz mode as preferred, which will often be used for
EDID 1.0 CRTs.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
xf86RandR12ScreenSetSize must protect calls to EnableDisableFBAccess with
suitable vtSema checks to avoid invoking driver code while the X server is
inactive.
The multi-crtc cursor code in hw/xfree86/modes holds a reference to the
current cursor. This reference must be correctly ref counted so the cursor
is not freed out from underneath this code.
As a result, we can remove the quirks that existed to flip the bits back around
for us. This is not confirmed in all cases due to lack of bugs containing EDID
blocks associated with the quirks, but is likely true.
Set the new randr crtc of the output before the output change notification is
delivered to the clients.
Remove RROutputSetCrtc as it is not really necessary. All we have to do is set
the output's crtc on RRCrtcNotify
When the PreferredMode option is selected in the config file, remove the
M_T_PREFERRED bit from all other preferred modes to force the config file
mode to be selected.
Code that disabled mode detection on disabled outputs would confuse
applications by listing said outputs as connected but without any modes.
This makes the disabled state in the config file affect only the initial
configuration and not subsequent modifications by RandR.
The DDX code was ignoring pending properties for computing when mode setting
was required. This meant that configurations differing only in property
values would not cause the mode to be set.
I made a mistake in some new code using MakeAtom, passing the size of the
string instead of the length of the string. Figuring there might be other
such mistakes, I reviewed the server code and found four bugs of the same
form.
at server startup, and not against the virtual X/Y parameters
as they can change.
This fixes an issue when canGrow is TRUE and modes get dropped
when using the virtual X/Y parameters.
DRI uses a non-screen block/wakeup handler which will be executed after the
screen block handler finishes. To ensure that the rotation block handler is
executed under the DRI lock, dynamically wrap the screen block handler for
rotation.
Leaving devices enabled during server startup can cause problems during the
initial mode setting in the server, especially when they are used for
different purposes by the X server than by the BIOS. Disabling all of them
before any mode setting is attempted provides a stable base upon which the
remaining mode setting operations can be built.
SourceValidate is used exclusively by the software cursor code to pull the
cursor off of the screen before using the screen as a source operand. This
eliminates the software cursor from the frame buffer while painting the
rotated image though. Disabling this function by temporarily setting the
screen function pointer to NULL causes the cursor image to be captured.
(cherry picked from commit 05e1c45ade)
Setting a mode on an unrotated CRTC was causing all of the rotation updates
to be disabled; the loop looking for active rotation wasn't actually looking
at each crtc, it was looking at the modified crtc many times.
(cherry picked from commit 8b217dee3a)
I've managed to solve my own bug (#10545) by applying the following
patch to the xserver.
Please apply.
<Conspiracy mode on>
This monitor is "Vista Certified". I wonder if this is a pure coincidence...
<Conspiracy mode off>
With kind regards
Erik Andrén
(cherry picked from commit a63704f14a)
Option "Enable" "True" will force the server to enable an output at startup
time, even if the output is not connected. This also causes the default
modes to be added for this output, allowing even sync ranges to be used to
pick out standard modes.
(cherry picked from commit a3d73ba2cb)
By default, use the screen monitor section for output 0, however, a driver
can change which output gets the screen monitor by calling
xf86OutputUseScreenMonitor.
(cherry picked from commit f4a8e54caf)
This Acer monitor reports support for 75hz refresh via EDID, and yet when
that rate is delivered, the monitor does not sync and reports out of range.
Use the existing 60hz quirk for this monitor.
(cherry picked from commit 1328a288e9)
xf86SetSingleMode tries to resize all crtcs to match the selected mode. When
a CRTC has no matching mode, it now disables the CRTC (instead of crashing).
Also, poke the RandR extension when xf86SetSingleMode is done so that
appropriate events can be delivered, and so that future RandR queries return
correct information.
(cherry picked from commit dc6c4f6989)
Yes, two changes in one commit. Sorry 'bout that.
The first change ensures that when pending property values have been
changed, a mode set to the current mode will actually do something, rather
than being identified as a no-op. In addition, the driver no longer needs to
manage the migration of pending to current values, that is handled both
within the xf86 mode setting code (to deal with non-RandR changes) as well
as within the RandR extension itself.
The second change eliminates the two-call Create/AttachScreen stuff that was
done in a failed attempt to create RandR resources before the screen
structures were allocated. Merging these back into the Create function is
cleaner.
(cherry picked from commit 57e87e0d00)
Conflicts:
randr/randrstr.h
randr/rrcrtc.c
I think master and server-1.3-branch are more in sync now.
desiredX and desiredY were not recorded during xf86InitialConfiguration.
desiredX, desiredY and desiredRotation were not recorded during
xf86SetSingleMode.
(cherry picked from commit 36e5227215)
Pending Properties take effect when the driver says they do, so provide an
API to tell DIX when a property effect is made. Also, allow driver
to reject property values in RRChangeOutputProperty.
(cherry picked from commit 8eb288fbd6)
The rotation state is stored in the xf86_config structure which is not
re-initialized at server reset time. Clean it up at CloseScreen time.
(cherry picked from commit f8db7665dc)
The xf86 mode setting code was mis-using this field to try and store a
pointer to a DisplayModeRec, however, each output has its own copy of every
DisplayModeRec leaving the one in in the RRModeRec devPrivate field pointing
at a random DisplayModeRec.
Instead of attempting to rectify this, eliminating the devPrivate entirely
turned out to be very easy; the DDX code now accepts an arbitrary RRModeRec
structure and set that to the hardware, converting it on the fly to a
DisplayModeRec as needed.
(cherry picked from commit 3506b9376c)
The RandR protocol spec has several requests in support of user-defined
modes, but the implementation was stubbed out inside the X server. Fill out
the DIX portion and start on the xf86 DDX portion. It might be necessary to
add more code to the DDX to insert the user-defined modes into the output
mode list.
(cherry picked from commit 63cc2a51ef)
Conflicts:
randr/randrstr.h
Updated code to work in master with recent security API changes.
Rotation block handler was re-registering the rotation damage structure,
creating an infinite loop in the damage code. Track registration of the
damage structure to avoid this.
(cherry picked from commit b14f003b0e)
xf86_reload_cursors is supposed to be called from the crtc mode setting
commit hook; as that happens during server initialization, check for this
case.
(cherry picked from commit 5b77bf2d02)
This moves most of the cursor management code out of the intel driver and
into the general server code. Of course, the hope is that this code will be
useful for other driver writers as well.
Check out xf86Crtc.h for the usage information, making sure you add the
needed hooks to the crtc funcs structure for your driver.
(cherry picked from commit 4d81c99a46)
Previous version used monitor identifiers if present, otherwise output
names. That caused existing working configurations to break when additional
information was added to the configuration file.
(cherry picked from commit 3f5cedf00a)
Screen physical size is set to a random value before the RandR code gets
control, override that and reset it to a value based on the compat_output
physical size (if available). If that output has no physical size, just use
96dpi as the default resolution and set the physical size as appropriate.
(cherry picked from commit 843077f23a)
xf86SetDesiredModes applies the desired modes to each crtc (as selected by
xf86InitialConfiguration initially and modified by successful mode settings
afterwards). For crtcs without a desired mode, pScrn->currentMode is used to
select something workable.
(cherry picked from commit bcade98cca)
This function applies a single mode to the screen (as from RandR 1.1,
XFree86-VidModeExtension or XFree86-DGA) using a policy that selects one
output to reconfigure to the requested mode and then makes all other outputs
fit within that size.
(cherry picked from commit 5a595c1f76)
Box transformation from source to dest area was broken, leaving the wrong
areas painted when the crtc origin was non-zero.
When rotating from left to right, the pixmap doesn't get reallocated, and so
no damage was left in the pixmap from xf86RotatePrepare. Separately damage
the whole crtc area when this occurs to repaint the area.
(cherry picked from commit 2a50ca2160)
canGrow indicates to the DDX that the driver can enlarge the desktop via the
xf86_config->funcs->resize hook. If so, xf86InitialConfiguration will set
virtual[XY] to match the configuration it chooses and will leave the crtc config
size ranges alone. If FALSE, it will bloat the screen to fit the largest probed
mode and also set the crtc config max size to limit the desktop to the initial
virtual[XY] size.
This hook is called when the DDX needs to resize the screen. The driver is
responsible for changing virtualX and virtualY, along with any other related
screen properties (devPrivate.ptr, devKind, displayWidth, etc.).
Use the size range from the crtc config instead of randrp->virtual[XY] when
reporting the min and max screen sizes to the DDX.
in xf86CrtcSetMode, scrn->pScreen will be NULL during server startup time,
so don't try to set the subpixel order. subpixel order will be set in the
randr initialization anyways.
(cherry picked from commit 5f6f8616d8)
New modes header files required a few minor changes to be used by external
drivers, the most notable of which is the publication of the config file
parser header files.
Add monitor "Rotate" option taking one of "normal", "left", "inverted" or
"right". However, because initial mode selection is made before the screen
is completely initialized, we cannot create the shadow pixmap object at this
point. Pend the shadow pixmap creation until the block handler.
Note that this code is not completely functional yet.
Code added in hw/xfree86/modes came from the server-1.3-branch.
Portions of this code had previously been integrated into xf86Mode.c
and edid_modes.c.
To preserve hw/xfree86/modes as much as possible, the duplicate code from
the other files has been disabled; a more careful review would figure out
where that code actually belonged.
RandR 1.0 sizeID must be computed the same way every time, so when reporting
it in the ScreenChangeNotify event, just construct the usual 1.0 data block
and use that.
subpixel geometry information can be computed by looking at the connected
outputs and finding any with subpixel geometry and using one of those for
the global screen subpixel geometry. This might be improved by reporting
None if more than one screen has information and they conflict.
This code comes from the intel driver, so there's no history in this tree.
As the crtc/output-based mode selection code uses ddc, the ddc and i2c
modules have been merged into the server. Attempts to load them are safely
ignored now.
