These hints allow an acceleration architecture to optimize allocation of certain
types of pixmaps, such as pixmaps that will serve as backing pixmaps for
redirected windows.
This reverts commit 1365aeff54.
It defeated the optimization for drivers that don't provide a CreatePixmap
hook. The optimization makes no sense for drivers that do anyway, so disable
it for them completely.
This adds hooks for the driver to access Create/DestroyPixmap and ModifyPixmapHe
ader.
It allocates a 0 sized pixmap using fb and calls the driver routine to do
work of allocating the actual memory.
ModifyPixmapHeader is mainly required for hooking the screen pixmap which
isn't create by normal methods
Not sure what I was thinking when I wrote this... it would cause the box
coordinates to be off for exaCopyNtoNTwoDir or fallbacks.
Thanks to Tilman Sauerbeck for pointing out the problem on IRC and testing the
fix.
If the driver isn't compatible to the server, all bets are off anyway wrt
the contents of the fields that we're validating, which can lead to bogus
error messages.
This was an attempt to avoid scratch gc creation and validation for paintwin
because that was expensive. This is not the case in current servers, and the
danger of failure to implement it correctly (as seen in all previous
implementations) is high enough to justify removing it. No performance
difference detected with x11perf -create -move -resize -circulate on Xvfb.
Leave the screen hooks for PaintWindow* in for now to avoid ABI change.
Improve exaShmPutImage performance and reuse its core in exaPutImage as it
seems faster than the previous code when the driver doesn't provide an
UploadToScreen hook.
Make sure all damage records are notified of the damage incurred by actual
ShmPutImage calls.
Remove superfluous manual damage tracking for actual PutImage calls.
Exclude bits that will be overwritten from migration.
Use exaGlyphs even when Composite can't be accelerated, to avoid PolyFillRect
roundtrip via offscreen memory.
Initialize mask pixmap in exaGlyphs in FB in addition to system if the driver
provides Composite hooks to avoid migration overhead.
Remove manual damage tracking where superfluous.
Initialize system and FB copy in exaFillRegionSolid and adapt
exaGetPixmapFirstPixel to the new migration infrastructure.
This should mostly eliminate migration overhead for these, whether they are
used for acceleration or fallbacks.
As we can't actually accelerate anything interesting here, just migrate out
once and call fbSolidBoxClipped instead of taking a round trip via offscreen
memory with exaSolidBoxClipped.
Reuse pending damage region for extents and to prevent any actual migration of
pixmap contents when we're overwriting the whole pending damage region.
Remove superfluous manual damage tracking.
Only migrate once in exaTrapezoids/Triangles instead of every time in
exaRasterizeTrapezoid/AddTriangles. Adapt manual damage tracking to new
infrastructure.
Also move definition of NeedsComponent() closer to where it's used.
We finally want to catch all cases where the pixmap pointer is dereferenced
outside of exaPrepare/FinishAccess.
Also fix a couple of such cases exposed by this change.
The initiator of migration can pass in a region that defines the relevant area
of each source pixmap or the irrelevant area of the destination pixmap. By
default, the pending damage region is assumed relevant for the destination
pixmap, and everything for source pixmaps.
Thanks to Jarno Manninen for reassuring me that my own ideas for this were
feasible and for providing additional ideas.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
Composite's automatic redirection is a more general mechanism than the
ad-hoc BS machinery, so it's much prettier to implement the one in terms
of the other. Composite now wraps ChangeWindowAttributes and activates
automatic redirection for windows with backing store requested. The old
backing store infrastructure is completely gutted: ABI-visible structures
retain the function pointers, but they never get called, and all the
open-coded conditionals throughout the DIX layer to implement BS are gone.
Note that this is still not a strictly complete implementation of backing
store, since Composite will throw the bits away on unmap and therefore
WhenMapped and Always hints are equivalent.
The fb pointer would be left uninitialized when exaPixmapIsOffscreen
returned false. When it returned true and the pixmap was damaged,
fb would be initialized from the pixmap's devPrivate.ptr before the
exaDoMigration and exaPrepareAccess calls, at which point
devPrivate.ptr would still be pointing at offscreen memory.
miTrapezoids creates an alpha pixmap and initializes the contents
using PolyFillRect, which causes the pixmap to be moved in for
acceleration. The subsequent call to RasterizeTrapezoid won't be
accelerated by EXA, which causing the pixmap to be moved back out
again.
By wrapping Trapezoids and using ExaCheckPolyFillRect instead of
PolyFillRect to initialize the pixmap, we avoid this roundtrip.
This avoids some inefficiency in creating a temporary Picture
for every glyph at rendering time. My measurements with an i965
showed the previous patch causing a 10-15% slowdown for NoAccel
and XAA cases, (while providing an 18% speedup for EXA).
With this change, the NoAccel and XAA performance regression is
eliminated, and the overall EXA speedup, (before any of the
glyphs-as-pixmaps work), is now 32%.
Instead of system-memory data which prevents accelerated
compositing of glyphs, (at least without forcing an upload
of the glyph data before compositing).
If the pixel in framebuffer memory isn't modified since we uploaded it, we
can just read from the system memory copy, wihch avoids both a readback and
an accelerator stall.
In principle this function is still wrong, and all the framebuffer pixel
access should be going through (w)fb so we can get pixel layout corrections.
This is mainly to avoid wasting effort for XSync(), but just reading a single
pixel directly is probably faster than DownloadFromScreen anyway. Though in
light of the latter, even larger thresholds might be useful.
Also move the swappedOut check before the migration checks because migration
can't actually occur when swapped out.
Only migrate when appropriate. In particular, don't migrate to offscreen in the
no-fallback case as copying from system memory should usually be as fast if not
faster than DownloadFromScreen, in particular if the bits need to be uploaded
to offscreen first.
* Defer to simpler hooks in more cases (inspired by XAA behaviour).
* Move damage tracking from lower to higher level functions.
* Always migrate for fallbacks.
* Convert rects to region and use it for damage tracking.
* When possible, defer to exaFillRegion{Solid,Tiled} using converted region.
* Always migrate for fallbacks.
* Move damage tracking out of ExaCheckPolyFillRect.
* Support planemasks, different ALUs and arbitrary tile origin.
* Leave damage tracking and non-trivial fallbacks to callers.
* Always migrate for fallbacks.
This is in preparation for using these from more other functions.
Additionally, protect libcw setup behind checks for Render, to avoid
segfaulting if Render isn't available (xnest).
The previous setup was an ABI-preserving dance, which is better nuked now.
Now, anything that needs libcw must explicitly initialize it, and
miDisableCompositeWrapper (previously only called by EXA and presumably binary
drivers) is gone.
This is a new behavior for version 2.1 of EXA, and only takes effect if the
driver has requested that. Otherwise, the previous behavior remains the same.
This has been what has been used the most successfully post-damagetrack.
The current thinking is that:
1) We should be able to accelerate basically everything. So we don't need to
try to migrate trees of pixmaps permanently out of framebuffer to speed
CPU drawing up.
2) Migration is cheaper in the thrashing case, so we don't want to go to a lot
of effort to try (and fail badly) to find a working set.
Mostly due to exaDrawableDirty() now calculating the backing pixmap coordinates
internally, for cases where they aren't trivially known. There's a new
exaPixmapDirty() function for the other cases.
Also, rename to exaTryMagicTwoPassCompositeHelper() as it is now called for
non-component-alpha masks also, and add function description from
http://anholt.livejournal.com/32058.html.
Get rid of almost all uses of these definitions. They're still defined for
delinquent out-of-tree drivers, and also for the Mesa build. As well as
for miinitext.c. But largely gone.
which still happen somewhat frequently and were cluttering up my
fallback debugging output. x11perf says it's a major performance win in
those cases (though probably irrelevant), and it passes Xlib9.
through the whole CompositePicture stack and doing things like
computing damage over again. This is a sizeable win for text drawing
with a compmgr. Also avoid calling down into the server for dealing
with the scratch pixmap when we are able to do UploadToScreen
successfully and never need it.
down into an OutReverse and an Add. Turn off the fallback to software
glyphs when component alpha, now that we expect all (new) drivers to be
able to support it. Also, make Xephyr fall back in the CA Over case to
exercise this code. This speeds up my rgb24text and ls -lR in
gnome-terminal by a factor of 5.
and if they all have a maskFormat matching the format of the actual
glyphs If so, we can avoid the temporary pixmap for accumulating
glyphs, which reduces the number of operations done, and makes it
easier on the migration system. This fixes some significant performance
issues, particularly with subpixel antialiasing. Note that it does
increase the amount of damage computation which is done, so is not
always a win with a compositing manager running.
one behaves somewhat between Greedy and Always. It moves in if we can
accelerate, unless the destination is clean and shouldn't be kept in
framebuffer according to the score, in which case we migrate out (and
force-migrate anything where migration is free). This should help fix
lack of acceleration for drivers without UTS since removing
exaAsyncPixmapGCOps, and has removed one performance trap with Radeon
I'd noticed. It is the new default.
implementation to avoid unprepared access to the tile. Also, relocate
the fbGetDrawable to avoid using a stale dest pointer after
exaSolidBoxClipped() may have migrated it. Revealed by xtest.
devPrivate.ptr when pointing at offscreen memory, outside of
exaPrepare/FinishAccess(). This was used with fakexa to find (by NULL
dereference) many instances of un-Prepared CPU access to the
framebuffer:
- GC tiles used in several ops when fillStyle == FillTiled were never
Prepared.
- Migration could lead to un-Prepared access to mask data in render's
Trapezoids and Triangles
- PutImage's UploadToScreen failure fallback failed to Prepare.
plug in the accelerated one, even if the destination pixmap is
currently offscreen. This was a leftover from when kaa originally got
accelerated offscreen pixmap support, and its only concievable use was
to avoid a little overhead on ops to in-system pixmaps that weren't
going to get migrated. At this point, we probably care more about just
getting everything accelerated that we easily can, which should happen
with the new migration support.
FB_ALLONES, bitsPerPixel >= 8, GXcopy cases. With the radeon driver on
my machine, this gives about 10% speedup in PutImage
10x10 and 500x500, and 40% speedup for 10x10 ShmPutImage, up to 65%
improvement in 500x500 ShmPutImage. Also fixes a crasher in GetImage
that slipped in at the last minute.
ZPixmap, planeMask ~= FB_ALLONES, bitsPerPixel >= 8 case. I'm pretty
convinced that this is the only case that we care about at all. Tested
with xwd -root and xwd on a gnome-terminal, in a composited environment
or not.
pixmap, and damage is tracked so that a later exaMoveInPixmap won't
result in an upload if no upload is necessary. This will likely improve
the performance of the "Always" migration scheme significantly, and is
a step in the path to more exact damage tracking between framebuffer
and system memory.
desired location always (unless they don't fit in FB, in which case
they all get moved out for software rendering). The default remains as
before, but can be controlled by the MigrationHeuristic xorg.conf
option (which is intentionally not documented, as it may be
short-lived). This is part of the exa-damagetrack work, which appears
stable in testing with fakexa, unlike the work as a whole.
manual conversion to allow for different migration schemes to be
implemented reasonably, but does include some minor improvements such
as accounting for pinned pixmaps not being acceleratable, and for our
current GetImage and GetSpans not being accelerated.
corresponding pieces of exa-driver.txt, which were becoming stale.
Hopefully the documentation will stay much more up-to-date this way.
Many thanks to jbarnes for writing exa-driver.txt which was used a lot
in writing this documentation.
when extending the driver interface. The card and accel structures are
merged into the ExaDriverRec, which is to be allocated using
exaDriverAlloc(). The driver structure also grows exa_major and
exa_minor, which drivers fill in and have checked by EXA
(double-checking that the driver really did check that the EXA version
was correct). Removes exaInitCard(), which is replaced by the driver
filling in the rec by hand, and the exaGetVersion() and related
EXA_*VERSION which are replaced by always using the XFree86 loadable
module versioning.
dependencies. It was nearly abstract enough already to be used by
multiple DDXes. This will be useful for EXA development through
providing a fake acceleration implementation within Xephyr, so that
testing can be done on new EXA code without worrying about buggy
drivers.
pixmaps's contents are undefined, so we won't need to upload the
undefined contents in MoveIn. Use the ExaCheck* for async ops as well,
so that dirty is always tracked. While the performance impact for my ls
-lR test was not significant (though the avoiding-upload path was being
hit), it's likely to be important for the upcoming Get/PutImage
acceleration from ajax.
causing our search loop for evictable blocks to possibly skip a good
candiate, and another was the allocator would occasionally use
area->offset as if it was the base of the pixmap, while for a pixmap
that is not in available state, it is not. This caused some funny
miscalculation leading to overlapping pixmaps and accesses beyond the
end of the framebuffer. To make things cleared, I renamed save_offset
to base_offset, made sure it's the one used everywhere in the
allocator, and only align "offset" for the client at the end of
exaOffscreenAlloc().
don't expect drivers to be able to accelerate without exa assistance).
Instead, drop back to plain old miGlyphs for a 62.5% +/- 1.5% reduction
in runtime of my ls -lR test (n=5) with component alpha. While a
reasonable approach would seem to be making a better test to see
whether the entire path would be accelerated and force migration
appropriately, my attempt at this made the situation much worse.
accelerate repeat NPOT thus triggering software fallback (this is the
case with gnome desktop for example). This adds a simple optimisation
to exa that removes "repeat" when it's obviously useless, that is, the
single picture instance covers the entire rectangle beeing used
so resulted in a solid black glyph if the font rendering actually
resulted in a fallback (subpixel AA, for example) and the temporary got
migrated after 10 or so glyphs.
- Merge various fb/ bits of COMPOSITE support from xserver, which weren't
necessary before due to cw hiding the issues. Fixes offset calculations
for a number of operations, and may pull some fixes that cairo has
wanted for XAA as well.
- Add a new call, miDisableCompositeWrapper(), which a DDX can call to keep
cw from getting initialized from the damage code. While it would be
cleaner to have each DDX initialize it if it needs it, we don't have
control over all of them (e.g. nvidia).
- Use the miDisableCompositeWrapper() to keep cw from getting set up for
screens using EXA, because EXA is already aware of composite. Avoiding
cw improved performance 0-35% on operations tested by ajax in x11perf.
particularly thanks to Prepare/FinishAccess) to avoid DFS/memcpy on
pixmap move-out if it's unnecessary. This was disabled in KAA because
cache misuse on ATI made me guess that this code was wrong.
- Unwrap Glyphs on closescreen.
than the max, it was bumped, and then if you were above the threshhold
you got moved in. Instead, do the above-threshhold check separate from
score starting out less than max. While this will likely make thrashing
cases worse, I hope it will fix some issues with long term performance
(think of an xcompmgr with a backbuffer it's doing only accelerated
operations to. If some new pixmap comes in and bumps it out, even once,
it will never get a chance to re-migrate because its score will be
maxed). Change migration-out to be the same way for symmetry, though it
shouldn't ever affect anything.
- Fix a lot of debugging output, both in terms of printing quality, and
completeness. The fallback debugging covers a lot more now, pointing
out new areas for improvement. Debugging toggles are now centralized in
exaPriv.h.
example of this is the root weave, which paints slightly slower on SiS
now in my testing. However, according to keithp some apps use this
feature for a sort of cheap backing store, which this could help with
significantly. While I haven't done much performance testing with it,
it will at least rule out one possible source of terrible performance.
hook so we can upload a subset of a pixmap, and convert the current
drivers to respect that. Use this support to directly UploadToScreen in
exaGlyphs, providing a 47.4% +/-2.4% decrease in wall time for ls -lR
programs/Xserver in an antialiased gnome-terminal on an M6 (n=3, caches
hot). I would have bumped major version, only I can't tell what the
EXA_VERSION_* is supposed to be doing as opposed to the module version.
RADEONHostDataBlit.
- Disable the shortcut for switching from 3d to 3d in radeon_exa.c. It
appears that we do need the cache flush here, thought it's not clear
why. Disable the 2d to 2d shortcut while here, since I'm unsure of what
we're doing. Exposed by the following bit:
- Bug #4485: Add a new routine, exaGlyphs, to handle font drawing. Glyphs
were being accumulated in from non-migratable scratch pixmaps, causing
the destination pixmap to move towards screen but the migration
necessary for source never to happen, leading to abysmal performance.
Instead, copy the scratch glyph data into a real pixmap first, then
composite from that into the destination, allowing for migration. time
ls -lR from programs/Xserver showed 26.9% (+/- 6.3%) decrease in wall
time (n=3).
- Create exaDrawableUse* wrapping exaPixmapUse*, but which are aware of
windows needing backing store. Makes migration code prettier, and
ensures that composited windows will be migrated as normal when we turn
off cw for EXA. (issue brought up by keithp)
around CPU access to the framebuffer. This allows the hardware to set
up swappers to deal with endianness, or to tell EXA to move the pixmap
out to framebuffer if insufficient swappers are available (note: must
not fail on front buffer!).
Submitted by: benh
loops, doesn't deal with failure, doesn't present the interface to
drivers that I expected) and instead replace it with a simple fallback
to software when coordinate limits could be violated. Act similarly in
other acceleration cases as well.
The solution I want to see (and intend to do soon) is to (when necessary)
create temporary pictures/pixmaps pointing towards the real ones' bits,
with the offsets adjusted, then render from/to those using adjusted
coordinates.
Now, if either source or dest were in framebuffer, try to get both
there, but prefer system memory for both otherwise. Required making
exaasync.c go through the try-acceleration path. This significantly
improves window resizing under composite, because previously the
pattern of creating a new pixmap and copying default contents from the
screen caused a fallback every time due to the new destination pixmap
being in system memory.
simplify/clarify it for driver writers who probably don't want to know
what pPixmap->devPrivate.ptr or pPixmap->devKind mean. Converts the sis
driver to use them, and bumps the EXA module minor version.
.cvsignore files
Use XORG_CFLAGS. Ensure that all exa files are in SOURCES
remove _XOPEN_SOURCE as it's always in xtrans.pc these days and gcc whines
libdamage.la needs libcw.la when COMPOSITE is defined, but that
libdamage.la must be after libcomposite.la, so add libcw.la to
DAMAGE_LIB instead of EXTENSION_LIBS. Regularize library link order
across all X servers
