xdmxconfig.c: In function ‘dmxConfigCanvasDraw’:
xdmxconfig.c:299:23: warning: ‘maxHeight’ may be used uninitialized in this function
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: In function ‘dmxBlockHandler’:
dmxinputinit.c:610:44: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxWakeupHandler’:
dmxinputinit.c:637:41: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxInputInit’:
dmxinputinit.c:1041:36: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: At top level:
dmxinputinit.c:135:29: warning: ‘DMXCommonOth’ defined but not used
DMXCommonOth is actually mentioned in a #if 0 block, so delete it and
the block that references it. If anyone needs it, git remembers.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxgc.c: In function ‘dmxChangeClip’:
dmxgc.c:386:5: warning: case label value exceeds maximum value for type
dmxgc.c:387:5: warning: case label value exceeds maximum value for type
dmxgc.c:388:5: warning: case label value exceeds maximum value for type
dmxgc.c:389:5: warning: case label value exceeds maximum value for type
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Dear gcc: I do not care about machines where sizeof(void *) <
sizeof(int), and neither should you.
dmxextension.c: In function ‘dmxBECreateResources’:
dmxextension.c:858:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderPict’:
dmxextension.c:1062:29: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderGlyph’:
dmxextension.c:1084:35: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxAttachScreen’:
dmxextension.c:1277:8: warning: cast to pointer from integer of different size
dmxextension.c:1286:34: warning: cast to pointer from integer of different size
dmxextension.c:1292:35: warning: cast to pointer from integer of different size
dmxextension.c: In function ‘dmxBEDestroyResources’:
dmxextension.c:1456:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxDetachScreen’:
dmxextension.c:1599:8: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Fix winShadowUpdateDD(|NL) so we don't try to blit to primary surface if it didn't get allocated
(Intel drivers, in particular, seem to like to issue a WM_DISPLAYCHANGE during a suspend/resume
cycle, but not allow surface to be allocated right then)
Also:
Use winReleasePrimarySurfaceShadowDD(|NL) in winFreeFBShadowDD(|NL) rather than open coding it
Don't mess about recreating surface if we're going to resize it anyhow
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Make ShadowGDI drawing engine only change the size of the screen
pixmap/shadow framebuffer on an RANDR change, not the bpp/depth
as well.
The server requires the screen pixmap's depth to be invariant.
Other drawing engines aren't quite as affected by this issue as
they won't draw to the display, if it has changed colour depth,
but probably still need some attention.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
This is only relevant to pre-NT versions of Windows, which are all EOL.
Also, it's in the wrong place now as framebuffer can get resized.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Fortunately, these swapped constants are benign as they have the same
value, 0
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Don't turn off -multiplemonitors when all monitors don't have the
same pixel format and when using shadow GDI engine, just warn that
performance may be degraded
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
When RANDR resizing is enabled, generate an internal RANDR change when
WM_DISPLAYCHANGE occurs in rootless modes for screens which occupy an
entire monitor or the virtual desktop.
Store the monitor number and use that to handle WM_DISPLAYCHANGE for a
screen specified with '-screen @monitor'
In rooted mode, WM_DISPLAYCHANGE isn't relevant (except where display
depth changes may cause problems). (A maximized screen window will get
WM_SIZE to adjust it to the new monitor size)
In rooted fullscreen mode, WM_DISPLAYCHANGE shouldn't be seen, as we
have the resolution we have selected for the fullscreen session)
(Could client randr requests be handled in fullscreen to cause a change
of the fullscreen resolution? )
Don't bother do a RANDR resize if the dimensions aren't actually changing
when WM_DISPLAYCHANGE is sent (should handle WM_DISPLAYCHANGE to size 0x0
that the intel driver seems to like to send)
Various debug output improvements
Also, remove the note that XWin can't handle display mode changes from
the man page
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
To avoid recursion, WM_SIZE requests shouldn't generate XRANDR requests
when no change is neeeded.
We do the actual resize on WM_EXITSIZEMOVE, as resizing occurs in
a modal loop, to avoid a backlog of resize events building up as
the X server doesn't get a change to process anything until the resize
is completed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Implement framebuffer resizing in RANDR extension:
Resize the frame buffer, the screen's root window and the native window
containing the root window image.
Correctly allow for decorations in new native window size when resizing native window
to fit the new framebuffer size with AdjustWindowRectEx()
Update physical size info for a screen when it is changed by RANDR
Forbid client-requested RANDR changes in fullscreen and rootless modes
Only resize window on an external RandR request, to avoid recursing on
a WM_SIZE requested resize.
Also, add prototypes for winRandRInit() and winDoRandRScreenSetSize() to header file
Also, update the author list and copyright for winrandr.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Add -resize command line option to configure how native window sizing frame
is used.
In additions to the existing fixed and scrollbars modes, add a new mode to
allow framebuffer to be resized using native window frame
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Move QueryMonitor() out of windprocarg.c into a new file, winmonitors.c,
as we use to use it from other places as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Remove an attempt at the rather difficult optimization of detecting
if WM_DISPLAYCHANGE affects any of the monitors which intersect the
native window for the X screen.
We'll always act as if it does, which it probably usually the case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
(This stored calculation was wrong if -dpi came after -screen on the command
line, anyhow)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Refactor the drawing engines so we can explicitly allocate and release the framebuffer for a screen
Move the setting of dwPaddedWidth into the DDNL engine, so it is updated when the framebuffer changes size
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Some trivial build fixes required
Also fill out all function pointers for primaryfb engine
Also tidy up the man page section describing drawing engines.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Following the convention makes it easier to locate man pages,
user's or developer's documentation and specifications.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Makefile.am: there are only 4 string substitutions to be done in this file.
SED is much simpler than the C pre processor which adds its own
strings which must be substituted by sed, still.
xorgconf.cpp: replaced __xconfigfile__ with xorg.conf as this file name
is hard coded in the xserver configuration and cannot change.
Replace XCOMM with # permanently.
Delete cpprules.in as it isn't used anywhere else. Should one need
cpprules for real cpp work, there is one in Xquartz from which the
the old man pages code have been stripped.
Fix trailing spaces.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create a manpages.am makefile snippet in the root dir.
Each man page makefile includes manpages.am.
Now all man pages in xserver are generated the same way
using the same method as all of other xorg modules.
All ".man.pre" files in git are ".man" now.
Links are no longer created between different file types.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use standard directory and makefile.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Now can be built easily on any platform in the man directory
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is dead code which will not be used in the future.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man)
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The extra SourceValidate calls from damageCopyArea and damageCopyPlane
can be removed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
cc2c73ddcb4370a7c3ad439cda4da825156c26c9's three-cent titanium tax
doesn't go too far enough. Fix the rest of the call and jmp
instructions to handle the data prefix correctly.
Reference: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 2A: Instruction Set Reference, A-M
http://www.intel.com/Assets/PDF/manual/253666.pdf
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Cast it to a char *, mimicking the return immediately below it.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
lnx_agp.c: In function ‘xf86DeallocateGARTMemory’:
lnx_agp.c:267: warning: cast to pointer from integer of different size
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
render2.c: In function ‘__glXDisp_Map2d’:
render2.c:127: warning: ‘u1’ may be used uninitialized in this function
render2.c: In function ‘__glXDisp_Map1d’:
render2.c:90: warning: ‘u1’ may be used uninitialized in this function
Remove unnecessary test, and change memcpy to memmove as all users were
doing overlapping copies.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xcmisc.c:202: warning: no previous prototype for ‘XCMiscExtensionInit’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
dri.c: In function ‘DRIScreenInit’:
dri.c:434: warning: cast from pointer to integer of different size
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
