Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Be more precise in describing the return value.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Client resources can survive the client itself, in which case we
may end up in our sync callback trying to access client's data after
it's been freed/reclaimed.
Add a ClientStateCallback handler to monitor the client state changes
and clear the sync callback set up by the glamor drm code if any.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
After an X cursor is unrealized, the seat's corresponding x_cursor is
cleared, but if a frame callback was pending at the time, it will
remain and thus prevent any further cursor update, leaving the window
with no cursor.
Make sure to destroy the frame callback, if any, when that occurs, so
that next time a cursor needs to be set, it won't be ignored for a frame
callback that will never be triggered.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1389327
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Rui Matos <tiagomatos@gmail.com>
in XWayland, dri3_send_open_reply() is called from a sync callback, so
there is a possibility that the client might be gone when we get to the
callback eventually, which leads to a crash in _XSERVTransSendFd() from
WriteFdToClient() .
Check if clientGone has been set in the sync callback handler to avoid
this.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99149
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1416553
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
keyboard_check_repeat() fetches the XWayland seat from the
dev->public.devicePrivate do do its thing.
If a key event is sent programmatically through Xtest, our device is the
virtual core keyboard and that has a dev->public.devicePrivate of NULL,
leading to a segfault in keyboard_check_repeat().
This is the case with "antimicro" which sends key events based on the
joystick buttons.
Don't set the checkRepeat handler on the VCK since it cannot possibly work
anyway and it has no effect on the actual checkRepeat intended functionality.
Bugzilla: https://bugzilla.redhat.com/1416244
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
During the InitInput() phase, the wayland events get dequeued so we
can possibly end up calling dispatch_pointer_motion_event().
If this occurs before xwl_seat->focus_window is set, it leads to a NULL
pointer derefence and a segfault.
Check for xwl_seat->focus_window in both pointer_handle_frame() and
relative_pointer_handle_relative_motion() prior to calling
dispatch_pointer_motion_event() like it's done in
pointer_handle_motion().
Bugzilla: https://bugzilla.redhat.com/1410804
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The X11 window manager (XWM) of a Wayland compositor can use the
_XWAYLAND_ALLOW_COMMITS property to control when Xwayland sends
wl_surface.commit requests. If the property is not set, the behaviour
remains what it was.
XWM uses the property to inhibit commits until the window is ready to be
shown. This gives XWM time to set up the window decorations and internal
state before Xwayland does the first commit. XWM can use this to ensure
the first commit carries fully drawn decorations and the window
management state is correct when the window becomes visible.
Setting the property to zero inhibits further commits, and setting it to
non-zero allows commits. Deleting the property allows commits.
When the property is changed from zero to non-zero, there will be a
commit on next block_handler() call provided that some damage has been
recorded.
Without this patch (i.e. with the old behaviour) Xwayland can and will
commit the surface very soon as the application window has been realized
and drawn into. This races with XWM and may cause visible glitches.
v3:
- introduced a simple setter for xwl_window::allow_commits
- split xwl_window_property_allow_commits() out of
xwl_property_callback()
- check MakeAtom(_XWAYLAND_ALLOW_COMMITS)
v2:
- use PropertyStateCallback instead of XACE, based on the patch
"xwayland: Track per-window support for netwm frame sync" by
Adam Jackson
- check property type is XA_CARDINAL
- drop a useless memcpy()
Weston Bug: https://phabricator.freedesktop.org/T7622
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix the following warning due to --disable-glamor:
CC Xwayland-xwayland.o
In file included from /home/pq/local/include/wayland-client.h:40:0,
from xwayland.h:35,
from xwayland.c:26:
xwayland.c: In function ‘block_handler’:
/home/pq/local/include/wayland-client-protocol.h:3446:2: warning: ‘buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
wl_proxy_marshal((struct wl_proxy *) wl_surface,
^
xwayland.c:466:23: note: ‘buffer’ was declared here
struct wl_buffer *buffer;
^
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Refactor xwl_screen_post_damage() and split the window specific code
into a new function xwl_window_post_damage().
This is a pure refactoring, there are no behavioral changes. An assert
is added to xwl_window_post_damage() to ensure frame callbacks are not
leaked if a future patch changes the call.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Previously, we would swap the width/height of the Xwayland output based
on the output rotation, so that the overall screen size would match the
actual rotation of each output.
Problem is the RandR's ConstrainCursorHarder() handler will also apply
the output rotation, meaning that when the output is rotated, the
pointer will be constrained within the wrong dimension.
Moreover, XRandR assumes the original output width/height are unchanged
when the output is rotated, so by changing the Xwayland output width and
height based on rotation, Xwayland causes XRandr to report the wrong
output sizes (an output of size 1024x768 rotated left or right should
remain 1024x768, not 768x1024).
So to avoid this issue and keep things consistent between Wayland and
Xwayland outputs, leave the actual width/height unchanged but apply the
rotation when computing the screen size. This fixes both the output size
being wrong in "xrandr -q" and the pointer being constrained in the
wrong dimension with rotated with weston.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the Wayland compositor sets a rotation on the output, Xwayland
translates the transformation as an xrandr rotation for the given
output.
However, if the rotation is not supported by the CRTC, this is not
a valid setup and xrandr queries will fail.
Pretend we support all rotations and reflections so that the
configuration remains a valid xrandr setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For some applications (like fullscreen games) it matters for XRandr
resolution to be correctly set and equal to root window resolution.
In XServer there is already hack for this, adapted it for XWayland.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99574
Signed-off-by: Svitozar Cherepii <razotivs@gmail.com>
Tested-by: Svitozar Cherepii <razotivs@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Sometimes, Xwayland will try to use a cursor that has just been freed,
leading to a crash when trying to access that cursor data either in
miPointerUpdateSprite() or AnimCurTimerNotify().
CheckMotion() updates the pointer's cursor based on which xwindow
XYToWindow() returns, and Xwayland implements its own xwl_xy_to_window()
to fake a crossing to the root window when the pointer has left the
Wayland surface but is still within the xwindow.
But after an xwindow is unrealized, the last xwindow used to match the
xwindows is cleared so two consecutive calls to xwl_xy_to_window() may
not return the same xwindow.
To avoid this issue, update the last_xwindow based on enter and leave
notifications instead of xwl_xy_to_window(), and check if the xwindow
found by the regular miXYToWindow() is a child of the known last
xwindow, so that multiple consecutive calls to xwl_xy_to_window()
return the same xwindow, being either the one found by miXYToWindow()
or the root window.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1385258
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Vít Ondruch <vondruch@redhat.com>
Tested-by: Satish Balay <balay@fastmail.fm>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Commits 816015648f and
fee0827a9a made it so that
wl_keyboard::enter doesn't result in X clients getting KeyPress events
while still updating our internal xkb state to be in sync with the
host compositor.
wl_keyboard::leave needs to be handled in the same way as its
semantics from an X client POV should be the same as an X grab getting
triggered, i.e. X clients shouldn't get KeyRelease events for keys
that are still down at that point.
This patch uses LeaveNotify for these events on wl_keyboard::leave and
changes the current use of KeymapNotify to EnterNotify instead just to
keep some symmetry between both cases.
On ProcessDeviceEvent() we still need to deactivate X grabs if needed
for KeyReleases.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition by the manual is:
calloc(size_t nmemb, size_t size)
Swap the arguments of calloc() calls to be the right way around.
Presumably this makes no functional difference, but better follow the
spec.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not needed anymore now that mipointer exposes an API for that,
miPointerInvalidateSprite()
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
posix_fallocate() does an explicit rollback if it gets EINTR, and
this is a problem on slow systems because when the allocation size
is sufficiently large posix_fallocate() will always be interrupted
by the smart scheduler's SIGALRM.
Changes since v1 - big comment in the code to explain what is going on
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
On some random condition, a touch event may trigger a crash in Xwayland
in GetTouchEvents().
The (simplified) backtrace goes as follow:
(gdb) bt
#0 GetTouchEvents() at getevents.c:1892
#1 QueueTouchEvents() at getevents.c:1866
#2 xwl_touch_send_event() at xwayland-input.c:652
#5 wl_closure_invoke() from libwayland-client.so.0
#6 dispatch_event() from libwayland-client.so.0
#7 wl_display_dispatch_queue_pending() from libwayland-client.so.0
#8 xwl_read_events() at xwayland.c:483
#9 ospoll_wait() at ospoll.c:412
#10 WaitForSomething() at WaitFor.c:222
#11 Dispatch() at dispatch.c:412
#12 dix_main() at main.c:287
#13 __libc_start_main() at libc-start.c:289
#14 _start ()
The crash occurs when trying to access the sprite associated with the
touch device, which appears to be NULL. Reason being the device itself
is more a keyboard device than a touch device.
Moreover, it appears the device is neither enabled nor activated
(inited=0, enabled=0) which doesn't seem right, but matches the code in
init_touch() from xwayland-input.c which would enable the device if it
was previously existing and otherwise would create the device but not
activate it.
Make sure we do activate and enable touch devices just like we do for
other input devices such as keyboard and pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Pointer enter event coordinates are surface relative and we need them to
be screen relative for pScreen->SetCursorPosition().
https://bugzilla.gnome.org/show_bug.cgi?id=758283
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
eglGetDisplay forces the implementation to guess which kind of display
it's been handed. glvnd does something different from Mesa, and in
general it's impossible for the library to get this right. Add a new
inline that gets the logic right, and works around a quirk in epoxy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Emulate pointer warps by locking the pointer and sending relative
motion events instead of absolute. X will keep track of the "fake"
pointer cursor position given the relative motion events, and the
client warping the cursor will warp the faked cursor position.
Various requirements need to be met for the pointer warp emulator to
enable:
The cursor must be invisible: since it would not be acceptable that a
fake cursor position would be different from the visual representation
of the cursor, emulation can only be done when there is no visual
representation done by the Wayland compositor. Thus, for the emulator
to enable, the cursor must be hidden, and would the cursor be displayed
while the emulator is active, the emulator would be destroyed.
The window that is warped within must be likely to have pointer focus.
For example, warping outside of the window region will be ignored.
The pointer warp emulator will disable itself once the fake cursor
position leaves the window region, or the cursor is made visible.
This makes various games depending on pointer warping (such as 3D
first-person shooters and stategy games using click-to-drag-map like
things) work.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Translate grabbing a pointer device with confineTo set to a window into
confining the Wayland pointer using the pointer constraints protocol.
This makes clients that depend on the pointer not going outside of the
window region, such as certain games and virtual machines viewers, to
function more properly.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If there was an relative pointer motion within the same frame as an
absolute pointer motion, provide both the absolute coordinate and the
unaccelerated delta when setting the valuator mask.
If a frame contained only a relative motion, queue an absolute motion
with an unchanged position, but still pass the unaccelerated motion
event.
If the wl_seat advertised by the compositor is not new enough, assume
each relative and absolute pointer motion arrives within their own
separate frames.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Wait until wl_pointer.frame with dispatching the pointer motion event,
if wl_pointer.frame is supported by the compositor. This will later be
used to combine unaccelerated motion deltas with the absolute motion
delta.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Generating relative and absolute movement events from the same input
device is problematic, because an absolute pointer device doesn't
expect to see any relative motion events. To be able to generate
relative pointer motion events including unaccelerated deltas, create a
secondary pointer device 'xwayland-relative-pointer', and use that for
emitting relative motion events.
Signed-off-by: Krzysztof Sobiecki <sobkas@gmail.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Put device class initialization in init_[device_class](xwl_seat) and
releasing in release_[device class](xwl_seat). The purpose is to make
it easier to add more type of initialization here later, without making
the function too large.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Will be used for getting unaccelerated motion events and later for
relative motions used by a pointer warp emulator.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The way we map the touch absolute device to screen coordinates can't
work across wl_output mode and geometry events. Instead, set up
a fixed coordinate space, and transform touch events according to
the screen coordinate space as they happen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
The checks in xwayland's XYToWindow handler pretty much assumes that the
sprite is managed by the wl_pointer, which is not entirely right, given
1) The Virtual Core Pointer may be controlled from other interfaces, and
2) there may be other SpriteRecs than the VCP's.
This makes XYToWindow calls return a sprite trace with just the root
window if any of those two assumptions are broken, eg. on touch events.
So turn the check upside down, first assume that the default XYToWindow
proc behavior is right, and later cut down the spriteTrace if the
current device happens to be the pointer and is out of focus. We work
our way to the device's lastSlave here so as not to break assumption #1
above.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
In Xwayland's xwl_unrealize_cursor(), the x_cursor is cleared up only
when a device value is provided to the UnrealizeCursor() routine, but
if the device is NULL as called from FreeCursor(), the corresponding
x_cursor for the xwl_seat is left untouched.
This might cause a segfault when trying to access the unrealized
cursor's devPrivates in xwl_seat_set_cursor().
A possible occurrence of this is the client changing the cursor, the
Xserver calling FreeCursor() which does UnrealizeCursor() and then
the Wayland server sending a pointer enter event, which invokes
xwl_seat_set_cursor() while the seat's x_cursor has just been
unrealized.
To avoid this, walk through all the xwl_seats and clear up all x_cursor
matching the cursor being unrealized.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
wl_display_flush() can fail with EAGAIN and Xwayland would make this a
fatal error.
When this happens, it means that Xwayland has flooded the Wayland file
descriptor, either because the Wayland compositor cannot cope or more
likely because of a deadlock situation where the Wayland compositor is
blocking, waiting for an X reply while Xwayland tries to write data to
the Wayland file descriptor.
The general consensus to avoid the deadlock is for the Wayland
compositor to never issue blocking X11 roundtrips, but in practice
blocking rountrips can occur in various places, including Xlib calls
themselves so this is not always achievable without major surgery in the
Wayland compositor/Window manager.
What this patch does is to avoid dispatching to the Wayland file
descriptor until it becomes available for writing again, while at the
same time continue processing X11 requests to release the deadlock.
This is not perfect, as there is still the possibility of another X
client hammering the connection and we'll still fail writing to the
Wayland connection eventually, but this improves things enough to avoid
a 100% repeatable crash with vlc and gtkperf.
Also, it is worth considering that window managers and Wayland
compositors such as mutter already have a higher priority than other
regular X clients thanks to XSyncSetPriority(), mitigating the risk.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1278159
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=763400
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Keeping the shm fd open beyond pixmap creation means we can easily
reach the open file descriptor limit if an X client asks us to create
that many pixmaps. Instead, let's get the wl_buffer immediatly so that
we can destroy the shm pool and close the fd before being asked to
create more.
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Since xwayland's initial commit we have had a check to not process
wayland modifier events while one of our surfaces has keyboard focus
since the normal xkb event processing keeps our internal modifier
state up to date and if we use the modifiers we get from the
compositor we mess up that state.
This was slightly changed in commit
10e9116b3f to allow the xkb group to be
set from the wayland event while we have focus in case the compositor
triggers a group switch.
There's a better solution to the original problem though. Processing
queued events before overriding the xkb state with the compositor's
allows those events to be sent properly modified to X clients while
any further events will be modified with the wayland modifiers as
intended.
This allows us to fully take in the wayland modifiers, including
depressed ones, which fixes an issue where we wouldn't be aware of
already pressed modifiers on enter.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Emitting a LeaveNotify event every time the pointer leaves an X11 window
may confuse focus follow mouse mode in window managers such as
mutter/gnome-shell.
Keep the previously found X window and compare against the new one, and
if they match then it means the pointer has left an Xwayland window for
a native Wayland surface, only in this case fake the crossing to the
root window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Without this a change in eg Xext/ wouldn't relink Xwayland, making you
wonder why your changes didn't have any effect.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
At shutdown, the Xserver will free all its resources which includes the
RRCrtc and RROutput created.
Xwayland would do the same in its xwl_output_destroy() called from
xwl_close_screen(), leading to a double free of existing RRCrtc
RROutput:
Invalid read of size 4
at 0x4CDA10: RRCrtcDestroy (rrcrtc.c:689)
by 0x426E75: xwl_output_destroy (xwayland-output.c:301)
by 0x424144: xwl_close_screen (xwayland.c:117)
by 0x460E17: CursorCloseScreen (cursor.c:187)
by 0x4EB5A3: AnimCurCloseScreen (animcur.c:106)
by 0x4EF431: present_close_screen (present_screen.c:64)
by 0x556D40: dix_main (main.c:354)
by 0x6F0D290: (below main) (in /usr/lib/libc-2.24.so)
Address 0xbb1fc30 is 0 bytes inside a block of size 728 free'd
at 0x4C2BDB0: free (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4CCE5F: RRCrtcDestroyResource (rrcrtc.c:719)
by 0x577541: doFreeResource (resource.c:895)
by 0x5787B5: FreeClientResources (resource.c:1161)
by 0x578862: FreeAllResources (resource.c:1176)
by 0x556C54: dix_main (main.c:323)
by 0x6F0D290: (below main) (in /usr/lib/libc-2.24.so)
Block was alloc'd at
at 0x4C2CA6A: calloc (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4CC6DB: RRCrtcCreate (rrcrtc.c:76)
by 0x426D1C: xwl_output_create (xwayland-output.c:264)
by 0x4232EC: registry_global (xwayland.c:431)
by 0x76CB1C7: ffi_call_unix64 (in /usr/lib/libffi.so.6.0.4)
by 0x76CAC29: ffi_call (in /usr/lib/libffi.so.6.0.4)
by 0x556CEFD: wl_closure_invoke (connection.c:935)
by 0x5569CBF: dispatch_event.isra.4 (wayland-client.c:1310)
by 0x556AF13: dispatch_queue (wayland-client.c:1456)
by 0x556AF13: wl_display_dispatch_queue_pending
(wayland-client.c:1698)
by 0x556B33A: wl_display_roundtrip_queue (wayland-client.c:1121)
by 0x42371C: xwl_screen_init (xwayland.c:631)
by 0x552F60: AddScreen (dispatch.c:3864)
And:
Invalid read of size 4
at 0x522890: RROutputDestroy (rroutput.c:348)
by 0x42684E: xwl_output_destroy (xwayland-output.c:302)
by 0x423CF4: xwl_close_screen (xwayland.c:118)
by 0x4B6377: CursorCloseScreen (cursor.c:187)
by 0x539503: AnimCurCloseScreen (animcur.c:106)
by 0x53D081: present_close_screen (present_screen.c:64)
by 0x43DBF0: dix_main (main.c:354)
by 0x7068730: (below main) (libc-start.c:289)
Address 0xc403190 is 0 bytes inside a block of size 154 free'd
at 0x4C2CD5A: free (vg_replace_malloc.c:530)
by 0x521DF3: RROutputDestroyResource (rroutput.c:389)
by 0x45DA61: doFreeResource (resource.c:895)
by 0x45ECFD: FreeClientResources (resource.c:1161)
by 0x45EDC2: FreeAllResources (resource.c:1176)
by 0x43DB04: dix_main (main.c:323)
by 0x7068730: (below main) (libc-start.c:289)
Block was alloc'd at
at 0x4C2BBAD: malloc (vg_replace_malloc.c:299)
by 0x52206B: RROutputCreate (rroutput.c:84)
by 0x426763: xwl_output_create (xwayland-output.c:270)
by 0x422EDC: registry_global (xwayland.c:432)
by 0x740FC57: ffi_call_unix64 (unix64.S:76)
by 0x740F6B9: ffi_call (ffi64.c:525)
by 0x5495A9D: wl_closure_invoke (connection.c:949)
by 0x549283F: dispatch_event.isra.4 (wayland-client.c:1274)
by 0x5493A13: dispatch_queue (wayland-client.c:1420)
by 0x5493A13: wl_display_dispatch_queue_pending
(wayland-client.c:1662)
by 0x5493D2E: wl_display_roundtrip_queue (wayland-client.c:1085)
by 0x4232EC: xwl_screen_init (xwayland.c:632)
by 0x439F50: AddScreen (dispatch.c:3864)
Split xwl_output_destroy() into xwl_output_destroy() which frees the
wl_output and the xwl_output structure, and xwl_output_remove() which
does the RRCrtcDestroy() and RROutputDestroy() and call the latter only
when an output is effectively removed.
An additional benefit, on top of avoiding a double free, is to avoid
updating the screen size at shutdown.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The frame callback set up via wl_surface_frame() needs to be freed with
wl_callback_destroy() or we'll leak memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97065
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Otherwise if the geometry changes but the mode doesn't we end up with
the previous geometry from RR's point of view.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=768710
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
This partially reverts commit c1565f3.
When the pointer moves from an X11 window to a Wayland native window,
no LeaveNotify event is emitted which can lead to various unexpected
behaviors like tooltips remaining visible after the pointer has left the
window.
Yet the pointer_handle_leave() is called and so is the DIX CheckMotion()
but since the pointer enters a Wayland native window with no other
Xwayland window matching, DoEnterLeaveEvents() does not get invoked and
therefore no LeaveNotify event is sent to the X11 client at the time the
pointer leaves the window for a Wayland native surface.
Restore the XYToWindow() handler in xwayland-input that was previously
removed with commit c1565f3 and use that handler to pretend that the
pointer entered the root window in this case so that the LeaveNotify
event is emitted.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96437
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The call to 'InitButtonClassDeviceStruct' which initializes the pointer
buttons only results in the first three buttons being created due to a
hardcoded '3'. In order to expose all the buttons defined in the
btn_labels array, we subtitute 'NBUTTONS' in its place.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Substitute a few errant tab characters with eight spaces to conform to the
prevailing style.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On cursor unrealize, the associated pixmap is destroyed, make sure we
clear the pointer from the private resource and check for the value
being non-null when setting or destroying the cursor.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96246
This partially revert commit 984be78
The rountrip in Xwayland's InitInput() is unlikely the culprit for the
crash reported in bug 95337, even though it's triggered from
InitInput().
Startup goes like this:
xwl_screen_init()
xwl_output_create()
wl_display_roundtrip()
InitInput()
wl_display_roundtrip()
ConnectionInfo initialized
What happens in bug 95337 is that some output data is already available
when we reach InitInput()'s wl_display_roundtrip() and therefore we end
up trying to update the ConnectionInfo's data from RR routines before
ConnectionInfo is actually initialized.
Removing the wl_display_roundtrip() from InitInput() will not fix the
issue (although it would make it less lileky to happen), because
xwl_screen_init() also does a wl_display_roundtrip() after creating the
output, so the race that led to bug 95337 remains.
However, re-setting the xwl_screen->expecting_event to 0 again in
InitInput() still doesn't seem right. so this part is not restored
(thus a partial revert).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95337
Can't find any reference of pointer_limbo_window in the code, let's
remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Current Mesa Git master checks that the EGL display actually supports
the API passed to eglBindAPI, which can only succeed after
eglInitialize.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Read and dispatch pending Wayland events to make sure we do not miss a
possible reply from the compositor prior to discard a key repeat.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Key repeat is handled by the X server, but input events need to be
processed and forwarded by the Wayland compositor first.
Make sure the Wayland compositor is actually processing events, to
avoid repeating keys in Xwayland while the Wayland compositor cannot
deal with input events for whatever reason, thus not dispatching key
release events, leading to repeated keys while the user has already
released the key.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=762618
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This creates a function that invalidates the current sprite and forces
a sprite image reload the next time the sprite is checked, moving that
logic out of the xwayland sources and allowing the miPointerRec
structure to be removed from the server API.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If data is received during XWayland startup, it will be read early in
InitInput() before the connection data is initialized, causing a crash.
Remove the wayland rountrips from InitInput() as this is done again in
xwl_screen_init() where it seems more appropriate.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95337
Reviewed-by: Adam Jackson <ajax@redhat.com>
If posix_fallocate or ftruncate is interrupted by signal while working,
we return -1 as fd and the allocation process returns BadAlloc error.
That causes xwayland clients to abort with 'BadAlloc (insufficient
resources for operation)' even when there's a lot of resources
available.
Fix it by trying again when we get EINTR.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
XvWindowMask is defined as 0x00020000 and cannot fit in the XvAdaptor
type which is defined as an unsigned char, thus causing a compiler
warning:
xwayland-glamor-xv.c: In function ‘xwl_glamor_xv_add_adaptors’:
xwayland-glamor-xv.c:339:16: warning: large integer implicitly
truncated to unsigned type [-Woverflow]
This XvWindowMask value is actually not used for XvAdaptor itself but by
the server in its xf86xv implementation, so we don't even need that mask
in our xwayland-glamor-xv implementation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Some games (namely openttd) will raise an XError and fail with a
BadValue if their request to XF86VidModeSetViewPort fails.
Support only the default zoom and viewport, fail for everything else.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some applications (e.g. using lwjgl) try to parse the output of the
xrandr command and get confused with the mode name returned by Xwayland,
because it contains "@[frequency]" (e.g. "1024x640@60.0Hz").
Remove the @[frequency] part of the mode name to match what is found in
usual mode names on regular X servers to please those applications.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94589
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We had HAVE_POSIX_FALLOCATE checks, but no such macros were ever
defined anywhere. This commit makes it so that this macro is defined if
the posix_fallocate is detected during configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
On output removal, the CRTC that was added in xwl_output_create()
is not removed in xwl_output_destroy() and would cause a segmentation
fault later on in ProcRRGetMonitors():
(EE) Segmentation fault at address 0x100000001
(EE)
(EE) 10: ? (?+0x29) [0x29]
(EE) 9: /usr/bin/Xwayland (_start+0x29) [0x423299]
(EE) 8: /lib64/libc.so.6 (__libc_start_main+0xf0) [0x7fdd80e7f580]
(EE) 7: /usr/bin/Xwayland (dix_main+0x3b3) [0x544ef3]
(EE) 6: /usr/bin/Xwayland (Dispatch+0x31e) [0x54109e]
(EE) 5: /usr/bin/Xwayland (ProcRRGetMonitors+0x9b) [0x4ca18b]
(EE) 4: /usr/bin/Xwayland (RRMonitorMakeList+0x269) [0x4c9ba9]
(EE) 3: /usr/bin/Xwayland (RRMonitorSetFromServer+0x118) [0x4c9198]
(EE) 2: /usr/bin/Xwayland (MakeAtom+0x30) [0x530710]
(EE) 1: /lib64/libc.so.6 (__restore_rt+0x0) [0x7fdd80e93b1f]
(EE) 0: /usr/bin/Xwayland (OsSigHandler+0x29) [0x5792d9]
Remove the output CRTC in xwl_output_destroy() to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Older games (mostly those based on SDL 1.x) rely on the XVidMode
extension and would refuse to run without.
Add a simple, limited and read-only xvidmode support that reports the
current mode used so that games that rely on xvidmode extension can run
on XWayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Prefix the temporary file names used for allocating pixmaps with
"xwayland-" instead of "weston-". This makes it less confusing while
looking at the file names of the currently open fds of the Xwayland
process.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The last cursor frame we commited before the pointer left one of our
surfaces might not have been shown. In that case we'll have a cursor
surface frame callback pending which we need to clear so that we can
continue submitting new cursor frames.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This adds support to Xwayland to try and use OpenGL core
profile for glamor first.
v1.1: use version defines.
v2: let glamor work out core profile itself.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Replace the block/wakeup handler with a NotifyFd callback instead.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When unplugging an output, it's still listed in xrandr and the size
of the root window still includes the removed output.
The RR output should be destroyed when its Wayland counterpart is
destroyed and the screen dimensions must be updated in both the done
and the destroy handlers.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92914
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
In Wayland, a client (in this case XWayland) should set the cursor
surface when it receives pointer focus. Not doing this will leave the
curser at whatever it was previously.
When running on XWayland, the X server will not be the entity that
controls what actual pointer cursor is displayed, and it wont be notified
about the pointer cursor changes done by the Wayland compositor. This
causes X11 clients running via XWayland to end up with incorrect pointer
cursors because the X server believes that, if the cursor was previously
set to the cursor C, if we receive Wayland pointer focus over window W
which also has the pointer cursor C, we do not need to update it. This
will cause us to end up with the wrong cursor if cursor C was not the
same one that was already set by the Wayland compositor.
This patch works around this by, when receiving pointer focus, getting
the private mipointer struct changing the "current sprite" pointer to
an invalid cursor in order to trigger the update path next time a cursor
is displayed by dix.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Otherwise the server may try to draw onto the root window when closing
down, but when running rootless the root window has no storage thus
causing a memory corruption.
Thanks to Adam Jackson <ajax@redhat.com> for helping tracking this down!
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93045
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Marek Chalupa <mchqwerty@gmail.com>
check return values of RR.*Create calls
v2. do not bail out if we don't have any output
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
don't leak memory when realizing window fails
v2. take care of all memory allocation and return values,
not just one leak
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
wl_keyboard::enter is the equivalent of FocusIn + KeymapNotify: it
notifies us that the surface/window has now received the focus, and
provides us a set of keys which are currently down.
We should use these keys to update the current state, but not to send
any events to clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a pixmap isn't getting exported as a dmabuf, then we don't need to
make an EGLImage/GBM bo for it. This should reduce normal pixmap
allocation overhead, and also lets the driver choose non-scanout
formats which may be much higher performance.
On Raspberry Pi, where scanout isn't usable as a texture source, this
improves x11perf -copypixwin100 from about 4300/sec to 5780/sec under
xcompmgr -a, because we no longer need to upload our x11perf window to
a tiled temporary in order to render it to the screen.
v2: Just use pixmap->usage_hint instead of a new field. Drop the
changes that started storing gbm_bos in the pixmap priv due to
lifetime issues.
v3: Fix a missing gbm_bo_destroy() on the pixmap-from-fd success path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
One less layering violation (EGL should call glamor, if anything, not
the other way around).
v2: Move glamor.c's DestroyPixmap wrapping up above the
glamor_egl_screen_init() call, since glamor.c's DestroyPixmap
needs to be the bottom of the stack (it calls fb directly and
doesn't wrap). Caught by Michel.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When we have a single output, just set it to the physical size of that
output. Otherwise try to approximate it calculating a mean m.m. per
dot. Last fallback is to default to 96 DPI.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When a new output is hot-plugged we need to not only update our internal
screen dimensions, but also the dix screen dimensions, screenInfo
dimensions and the root window dimensions.
https://bugs.freedesktop.org/show_bug.cgi?id=92273
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
While we have keyboard focus, the server's xkb code is already locking
and latching modifiers appropriately while processing keyboard
events.
Since there is no guaranteed order between wl_keyboard key and
modifiers events, if we got the modifiers event with a locked or
latched modifier and then process the key press event for that
modifier we would wrongly unlock/unlatch. To prevent this, we ignore
locked and latched modifiers while any of our surfaces has keyboard
focus.
But we always need to set the xkb group index since this might be
triggered programatically by the wayland compositor at any time.
Reviewed-by: Daniel Stone <daniels@collabora.com>
output.done event can be sent even on some property change, not only
when announcing the output. Therefore we must check if we already have it
otherwise we may corrupt the list by adding it multiple times.
This fixes bug when xwayland looped indefinitely in output.done handler
and that can be reproduced following these steps (under X without
multi-monitor setup):
1) run weston --output-count=2
2) run xterm, move it so that half is on one output
and half on the other
3) close second output, try run weston-terminal
weston sends updated outputs which trigger this bug.
v2. factor out common code into function
move expecting_events into right branch
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
This makes Xwayland correctly handle a monitor getting unplugged.
[Marek]: use xorg_list_for_each_entry_safe
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
snprintf does not allocate memory, so we can never get an out-of-memory
error.
(Also, the error handler would free xwl_output after it was already
registered as an event listener.)
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Commit 2172714c changed behavior of capability handling, but it only
solved part of the problem. If Xwayland is launched without a capability
(e.g. no pointer device is connected when Xwayland was spinned up), and
later that capability comes, the device added will not be automatically
initialized. This patch initializes the device when the capability is
reported for the first time, thus avoiding the problem.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=81819
Signed-off-by: Boyan Ding <stu_dby@126.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is (eventually) called during
InitializeSprite() → *pScreen->SetCursorPosition → miPointerSetCursorPosition
when a device is set to floating. We don't do anything special outselves, but
we need to pass on to the next layer to make sure the device is initialized
properly. Otherwise, pScreen stays NULL and eventually crashes the server when
we try to clean up behind us.
Test case: grab a device → floats it, ungrab again → crash
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When grabbed, the slave device is floating, i.e. the master device is NULL.
CheckMotion() isn't happy with NULL. Make sure we pass the right device in,
either the master device when the device is attached, or the device itself
when it is floating.
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
A DeviceIntPtr with touch valuators is also created in order to deliver
the translated touch events. The lifetime of xwl_touch structs is tied
to the wayland ones, finishing in either wl_touch.up() or wl_touch.cancel()
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This struct holds information about each individual, ongoing touchpoint.
A list of these is held by the xwl_seat.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This was built as a hack for simple Wayland compositors like Weston
which were lazy and didn't want to configure windows server-side when
moved.
Since comboboxes and menus are separate toplevel O-R windows, this hack
breaks input as it needs to be traced normally, not simply sent to the
focused window.
X11 toolkits really do need their windows to be configured correctly
for their O-R windows comboboxes or menus other things, so let's fix
the lazy compositors and remove this.
I have tested this patch with both Weston and Mutter and neither of
them require any changes, and it fixes comboboxes and menus.
If somebody then wants to revert 73698d4, that's fine by me, so we
reduce the amount of API that DDXen have.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
xwayland windows ignored any key repeating settings
advertised by a compositor
v2. don't hardcode version 4 of seat
use AutoRepeatModeOn/Off
v3. use min(version, 4) when binding seat
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
By the time we get here we've already done CloseDownDevices, so on the
second regeneration you get:
Invalid read of size 4
at 0x43402A: RemoveDevice (devices.c:1125)
by 0x427902: xwl_seat_destroy (xwayland-input.c:568)
by 0x42649C: xwl_close_screen (xwayland.c:116)
by 0x4B7F67: CursorCloseScreen (cursor.c:187)
by 0x536003: AnimCurCloseScreen (animcur.c:106)
by 0x539831: present_close_screen (present_screen.c:64)
by 0x43E486: dix_main (main.c:351)
by 0x30D70206FF: (below main) (libc-start.c:289)
Address 0x980e1a0 is 64 bytes inside a block of size 904
at 0x4A07D6A: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x434158: RemoveDevice (devices.c:1157)
by 0x42F77B: CloseDeviceList (devices.c:1017)
by 0x430246: CloseDownDevices (devices.c:1047)
by 0x43E3EB: dix_main (main.c:333)
by 0x30D70206FF: (below main) (libc-start.c:289)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
By the time we get here we've already been through FreeAllResources,
which has already torn down the RANDR objects, so on the second
regeneration you get:
Invalid read of size 4
at 0x51C6F0: RRCrtcDestroy (rrcrtc.c:659)
by 0x4285F5: xwl_output_destroy (xwayland-output.c:191)
by 0x426464: xwl_close_screen (xwayland.c:112)
by 0x4B7F77: CursorCloseScreen (cursor.c:187)
by 0x536013: AnimCurCloseScreen (animcur.c:106)
by 0x539841: present_close_screen (present_screen.c:64)
by 0x43E496: dix_main (main.c:351)
by 0x30D70206FF: (below main) (libc-start.c:289)
Address 0x4cc6640 is 0 bytes inside a block of size 728 free'd
at 0x4A07D6A: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x51BCCF: RRCrtcDestroyResource (rrcrtc.c:689)
by 0x45CD91: doFreeResource (resource.c:872)
by 0x45DE56: FreeClientResources (resource.c:1138)
by 0x45DF06: FreeAllResources (resource.c:1153)
by 0x43E3BD: dix_main (main.c:321)
by 0x30D70206FF: (below main) (libc-start.c:289)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We need this for doing USB offload scenarios using glamor
and modesetting driver.
unfortunately only gbm in mesa 10.6 has support for the
linear API.
v1.1: fix bad define
v2: update the configure.ac test as per amdgpu. (Michel)
set linear bos to external to avoid cache. (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Xwayland opens anonymous files for its sharing buffers, move these
file descriptors out of the range of the client select mask to avoid
reaching the maximum number of clients prematurely.
https://bugs.freedesktop.org/show_bug.cgi?id=91072
Tested-by: Olivier Fourdan <fourdan@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In some extreme cases with animated cursors at a high frame rate we
could end up filling the wl_display outgoing buffer and end up with
wl_display_flush() failing.
In any case, using the frame callback to throttle ourselves is the
right thing to do.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Right now if "-auth" isn't passed on the command line, we let
any user on the system connect to the Xwayland server.
That's clearly suboptimal, given Xwayland is generally designed
to be used by one user at a time.
This commit changes the behavior, so only the user who started the
X server can connect clients to it.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xwayland currently allows wide-open access to the X sockets
it listens on, ignoring Xauth access control.
This commit makes sure to enable access control on the sockets,
so one user can't snoop on another user's X-over-wayland
applications.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix missing newlines from error string and fix grammar.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't even need to simulate button clicks; it's done automatically.
This also fixes scrolling in Qt5 apps.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove these defines as we start to remove support for non-standard
glamor layering as used by the intel driver.
v2: Rebase on the blockhandler change and the Xephyr init failure
change (by anholt), fix stray NO_DRI3 addition to xwayland.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
So that Xwayland gets re-linked each time glamor is modified.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Carlos Olmedo Escobar <carlos.olmedo.e@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
glEGLImageTargetTexture2DOES only set the first level.
Mesa handles this new texture as incomplete and renders a black screen.
We also want to prevent linear filtering.
https://bugs.freedesktop.org/show_bug.cgi?id=81800
Signed-off-by: Markus Wick <markus@selfnet.de>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xwayland Makefile explicitely set its dependencies on
WAYLAND_LIBS. If the ibrairies are installed in a non-standard
path, WAYLAND_LIBS contains '-L/path/to/the/lib' which will fail
at build time with:
"No rule to make target '-L/path/to/the/lib', needed by 'Xwayland'.
Stop"
Remove that explicit dependency to avoid the problem (LDADD ought
to be enough to get the right libraries linked).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently, the indexes are off by 4 because of the scroll buttons.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were three paths that called eglDestroyImageKHR:
* The front buffer
* The intel driver's flip buffer
* pixmaps under DRI3
This patch unifies the second two by having glamor_destroy_pixmap
always destroy any associaged EGL image. This allows us to stop
storing the back_pixmap pointer in glamor as that was only used to
make sure that buffer was freed at server reset time.
v2: check for valid pixmap_priv before using it in
glamor_egl_destroy_pixmap_image
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
xwayland.c:661:1: warning: function 'xwl_log_handler' could be declared with
attribute 'noreturn' [-Wmissing-noreturn]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Move drm.xml out of the automake conditional so make dist includes it
even if glamor-egl is disabled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83960
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of sending every little rect. Lets x11perf run to completion,
makes 'while true; do gtkperf -a; done' take longer to crash.
This is effectively a resend of the same logic against the old
xfree86+xwayland branch:
http://lists.x.org/archives/xorg-devel/2013-October/038453.html
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This implements simple throttling that keeps us to one attach per
frame. There isn't really an active performance benefit, since the
buffers will be redrawn only once per frame anyway, but it does cut down
on the chatty network traffic. Since the Wayland sockets might fill
up as well, the cut down on the volume of data we send out also provides
us with a big stability benefit.
Namely, mutter is a lot more stable running gtkperf, a fairly intensive
X11 application, after this change.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
If something quickly maps and unmaps a window, then we'll immediately
create and destroy the Wayland surface that cooresponds to that
window. If our mouse pointer is over the window when the surface is
created, we'll receive a enter on the window.
Since resource creation and destruction is not synchronous, that
means that the compositor will queue up an event for a resource that's
eventually destroyed. On the client-side, when we receive this message,
we note that the resource isn't allocated, and get a NULL surface in our
enter handler. We immediately try to dereference this, and then crash.
This was caused by running gtkperf while moving the window a lot.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
A few files in the server are including xorg-server.h, which is only
for use by Xorg server drivers. This fixes those errors and then adds
a check to make sure it doesn't happen again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Anytime a capability is first reported, the device is created, but after
that, it is only disabled/enabled.
This is a closer behavior to what Xorg does on VT switch, at the expense
of maybe leaving a dangling "physical" device if a capability goes for good.
Otherwise, any DeviceIntPtr (re)created after server initialization will be
left floating, and bad things happen when the wayland enter event handler
tries to update cursor position based on a floating device.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Started out as an Xorg module to be used from Xorg drivers to let
Xorg run under a wayland server. The idea was to be able to reuse the
2D acceleration from the Xorg driver. Now with glamor being credible,
a better plan is to just make Xwayland its own DDX, similar to Xwin
and Xquartz. This is a much better fit, as much of the code in the
original approach had to hack around Xorg doing Xorg things like take
over the VT, probe input devices and read config files. Another big win
is that Xwayland dosn't need to be setuid root.
The Xwayland support for DRI3, Glamor and render nodes was done by
Axel Davy <axel.davy@ens.fr>, who also did a lot of work on the rebase
to the Xwayland DDX.
Contributions from:
Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Corentin Chary <corentin.chary@gmail.com>
Daniel Stone <daniel@fooishbar.org>
Kristian Høgsberg <krh@bitplanet.net>
Robert Bragg <robert@linux.intel.com>
Scott Moreau <oreaus@gmail.com>
Tiago Vignatti <tiago.vignatti@intel.com>
Giovanni Campagna <gcampagn@redhat.com>
Jonas Ådahl <jadahl@gmail.com>
Ray Strode <rstrode@redhat.com>
Trevor McCort <tjmccort@gmail.com>
Rui Matos <tiagomatos@gmail.com>
Axel Davy <axel.davy@ens.fr>
Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Axel Davy <axel.davy@ens.fr>