This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mesa started supporting GL_OES_EGL_image on llvmpipe in 17.3, after this
commit:
commit bbdeddd5fd0b797e1e281f058338b3da4d98029d
Author: Gurchetan Singh <gurchetansingh@chromium.org>
Date: Tue Aug 1 14:49:33 2017 -0700
st/dri: add drisw image extension
That's pretty cool, but it means glamor now thinks it can initialize on
llvmpipe. This is almost certainly not what anyone wants, as glamor on
llvmpipe is pretty much uniformly slower than fb.
This fixes both Xorg and Xwayland to refuse glamor in such a setup.
Xephyr is left alone, both because glamor is not the default there and
because Xephyr+glamor+llvmpipe is one of the easier ways to get xts to
exercise glamor.
The (very small) downside of this change is that you lose DRI3 support.
This wouldn't have helped you very much (since an lp glamor blit is
slower than a pixman blit), but it would eliminate the PutImage overhead
for llvmpipe's glXSwapBuffers. A future change should add DRI3 support
for the fb-only case.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Xwayland's `xwl_destroy_window()` invokes `xwl_present_cleanup()`
before the common `DestroyWindow()`.
But then `DestroyWindow()` calls `present_destroy_window()` which will
possibly end up in `xwl_present_abort_vblank()` which will try to access
data that was previously freed by `xwl_present_cleanup()`:
Invalid read of size 8
at 0x434184: xwl_present_abort_vblank (xwayland-present.c:378)
by 0x53785B: present_wnmd_abort_vblank (present_wnmd.c:651)
by 0x53695A: present_free_window_vblank (present_screen.c:87)
by 0x53695A: present_destroy_window (present_screen.c:152)
by 0x42A90D: xwl_destroy_window (xwayland.c:653)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
Address 0x182abde0 is 80 bytes inside a block of size 112 free'd
at 0x4C2FDAC: free (vg_replace_malloc.c:530)
by 0x42A937: xwl_destroy_window (xwayland.c:647)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
by 0x446DA5: ProcKillClient (dispatch.c:3279)
by 0x4476AF: Dispatch (dispatch.c:479)
Block was alloc'd at
at 0x4C30B06: calloc (vg_replace_malloc.c:711)
by 0x433F46: xwl_present_window_get_priv (xwayland-present.c:54)
by 0x434228: xwl_present_get_crtc (xwayland-present.c:302)
by 0x539728: proc_present_query_capabilities (present_request.c:227)
by 0x4476AF: Dispatch (dispatch.c:479)
by 0x44B5B5: dix_main (main.c:276)
by 0x75F611A: (below main) (libc-start.c:308)
This is because `xwl_present_cleanup()` frees the memory but does not
remove it from the window's privates, and `xwl_present_abort_vblank()`
will still find it and hence try to access that freed memory...
Remove `xwl_present_window` from window's privates on cleanup so that no
other function can find and reuse that data once it's freed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1616269
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_output->randr_crtc is used in the update_screen_size() function :
==5331== Invalid read of size 4
==5331== at 0x15263D: update_screen_size (xwayland-output.c:190)
==5331== by 0x152C48: xwl_output_remove (xwayland-output.c:413)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
==5331== by 0x27574B: Dispatch (dispatch.c:421)
==5331== by 0x279945: dix_main (main.c:276)
==5331== Address 0x1aacb5f4 is 36 bytes inside a block of size 154 free'd
==5331== at 0x48369EB: free (vg_replace_malloc.c:530)
==5331== by 0x1F8AE8: RROutputDestroyResource (rroutput.c:421)
==5331== by 0x29A2AC: doFreeResource (resource.c:880)
==5331== by 0x29AE5B: FreeResource (resource.c:910)
==5331== by 0x152BE0: xwl_output_remove (xwayland-output.c:408)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== Block was alloc'd at
==5331== at 0x48357BF: malloc (vg_replace_malloc.c:299)
==5331== by 0x1F93E0: RROutputCreate (rroutput.c:83)
==5331== by 0x152A75: xwl_output_create (xwayland-output.c:361)
==5331== by 0x14BE59: registry_global (xwayland.c:764)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents multiple scroll events happening for wayland compositors
which send axis values other than 10. For example, libinput will
typically return 15 for each scroll wheel step, and if a wayland
compositor sends those to xwayland without normalising them, 2 scroll
wheel steps will end up as 3 xorg scroll events. By listening for the
discrete_axis event, this will now correctly send only 2 xorg scroll
events.
The wayland protocol gurantees that there will always be an axis event
following an axis_discrete event. However, it does not gurantee that
other events (including other axis_discrete+axis pairs) will not happen
in between them. So we must keep a list of outstanding axis_discrete
events.
Signed-off-by: Scott Anderson <scott@anderso.nz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
glamor_fds_from_pixmap() will bail out early if DRI3 is not enabled,
unfortunately Xwayland's glamor code would not set it as enabled which
would lead to blank pixmaps when using texture from pixmap.
Make sure to mark DRI3 as enabled from glamor_egl_screen_init() in
Xwayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107287
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The logical size is the size of the output in the global compositor
space. The mode width/height should be scaled as in the logical
size, but shouldn't be transformed. Thus we need to rotate back
the logical size to be able to use it as the mode width/height.
This fixes issues with pointer input on transformed outputs.
Signed-Off-By: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When support for allocating GBM BOs with modifiers was added,
glamor_fd_from_pixmap() was changed so that it would return an error if
it got a bo with modifiers set from glamor_fds_from_pixmap(). The
problem is that on systems that support BOs with modifiers,
glamor_fds_from_pixmap() will always return BOs with modifiers.
This means that glamor_fd_from_pixmap() was broken entirely, which broke
a number of other things including glamor_shareable_fd_from_pixmap(),
which meant that modesetting using multiple GPUs with the modesetting
DDX was also broken. Easy reproducer:
- Find a laptop with DRI prime that has outputs connected to the
dedicated GPU and integrated GPU
- Try to enable one display on each using the modesetting DDX
- Fail
Since there isn't a way to ask for no modifiers from
glamor_fds_from_pixmap, we create a shared _glamor_fds_from_pixmap()
function used by both glamor_fds_from_pixmap() and
glamor_fd_from_pixmap() that calls down to the appropriate
glamor_egl_fd*_from_pixmap() function.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
The API init_wl_registry() and has_wl_interfaces() are marked as being
optional, but both GBM And EGLStream backends implement them so there is
point in keeping those optional.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
When retrieving the Wayland buffer from a pixmap, if the buffer already
exists, the GBM backend will return that existing buffer.
However, as seen with the Present issues, if the call had previously
passed a wrong size, that buffer will remain at the wrong size for as
long as the buffer exists, which is error prone.
Considering that the width/height passed to get_wl_buffer() is always the
actual pixmap drawable size, and considering that the EGLStream backend
makes no use of the size either, there is really no point in passing the
width/height around.
Simplify the xwl_glamor_pixmap_get_wl_buffer() and EGL backends API by
removing the pixmap size, and use the drawable size instead.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_glamor_eglstream_init_egl() uses "EGL_IMG_context_priority"
extension, make sure it's actually available before using it.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Now that we have separate backends for EGLStream and GBM, we can
explicitly check for the EGLStream backend to disable present support
in that case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
To be able to check for availability of the Wayland interfaces required
to run a given EGL backend (either GBM or EGLStream for now), we need
to have each backend structures and vfuncs in place before we enter the
Wayland registry dance.
That basically means that we should init all backends at first, connect
to the Wayland compositor and query the available interfaces and then
decide which backend is available and should be used (or none if either
the Wayland interfaces or the EGL extensions are not available).
For this purpose, hold an egl_backend struct for each backend we are to
consider prior to connect to the Wayland display so that, when we get to
query the Wayland interfaces, everything is in place for each backend to
handle the various Wayland interfaces.
Eventually, when we need to chose which EGL backend to use for glamor,
the available Wayland interfaces and EGL extensions available are all
known to Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Move EGL backends initialization to its own function in
xwayland-glamor.c
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Introduces a new egl_backend function to let the EGL backend check for
the presence of the required Wayland interfaces.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGL backend availability requires both EGL extensions and Wayland
interfaces to be present, so we will need to consider multiple backends
during initialization.
As a preliminary work, move the egl_backend to its own struct so that we
can have more than one backend at any given time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If using a render node, we can skip DRM authentication.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Surely, we should fail to init GBM backend if "GL_OES_EGL_image" is
missing.
This seems to have been lost with commit 1545e2dba ("xwayland: Decouple
GBM from glamor").
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Both xwl_glamor_init_wl_registry() and the Wayland global registry
handler use the interface id/name in that order, using name/id in the
egl_backend vfunc makes things confusing and error prone.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Functions such as:
xwl_glamor_egl_supports_device_probing()
xwl_glamor_egl_get_devices()
xwl_glamor_egl_device_has_egl_extensions()
Are of no use outside of EGLStream support, move them to the relevant
source file.
Similarly, the other glamor functions such as:
xwl_glamor_init()
xwl_screen_set_drm_interface()
xwl_screen_set_dmabuf_interface()
xwl_glamor_pixmap_get_wl_buffer()
xwl_glamor_init_wl_registry()
xwl_glamor_post_damage()
xwl_glamor_allow_commits()
xwl_glamor_egl_make_current()
Are useless without glamor support enabled, move those within a
a "#ifdef XWL_HAS_GLAMOR" in xwayland.h
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Make xwl_output_get_xdg_output() private, it doesn't need to be
available elsewhere.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGLStream requires glamor, but the opposite is not true. So if someone
passes "-eglstream" with a GPU which does not support EGLStream, we
could maybe still try GBM and be lucky.
That allows Wayland compositors to pass "-eglstream" regardless of the
actual hardware, if they want to enable EGLStream on GPU which support
it.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
eglQueryDevicesEXT() would abort if the required extensions are not
available, meaning that enabling “-eglstream” on a non-EGLStream
capable hardware would lead to an abort().
Check that "EGL_EXT_device_base" extension is available and bail out
early if not, so we don't abort() later in eglQueryDevicesEXT().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The command line option "-eglstream" used to enable EGLStream support
for NVidia GPU was made available only when Xwayland was built with
EGLStream support enabled.
Wayland compositors who spawn Xwayland have no easy way to tell whether
or not Xwayland was built with EGLStream support enabled, and adding
"-eglstream" command line option to Xwayland when it wasn't built with
EGLStream support would prevent Xwayland from starting (“Unrecognized
option” error).
Make sure we support the command line option "-eglstream" regardless of
EGLStream support in Xwayland. Obviously, if Xwayland was built without
EGLStream support, this has no effect.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Changes the device name from "xwayland-stylus" to "xwayland-tablet stylus".
This doesn't fully address #26 but it goes a little step into making it more
human-readable.
https://gitlab.freedesktop.org/wayland/wayland/issues/26
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
If the pixmap size does not match the present box size, flickering
occurs.
This can happen when the client changes its size (e.g. switching to
fullscreen), and since the buffer is kept as long as the pixmap is
valid, once the buffer is created, it remains at the wrong (old) size
and causes continuous flickering.
Use the actual pixmap's drawable size instead of the present box to
create the buffer so that it's sized appropriately.
Bugzilla: https://bugs.freedesktop.org/106841
Fixes: 0fb2cca193 "xwayland: Preliminary support for Present's new
window flip mode"
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
We probably don't want a fake crtc to be visible to clients, and we
definitely don't want to generate events every time we create such a
fake (which would happen as a side effect from RRCrtcCreate hitting
RRTellChanged). As it happens we're not actually using that crtc for
anything because xwayland doesn't store any state on the crtc object,
so it suffices to use the real crtc for the screen.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
We were mixing stdint and CARD* types, causing compiler warnings on
32-bit. Just switch over to stdint, which is what we'd like the server
to be using long term, anyway.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of reusing xwl_window introduce a persistent window struct for every
window, that asks for Present flips.
This struct saves all relevant data and is only freed on window destroy.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Clean up only if the request points to the presenting window or its top
parent window.
Since in this case all events are removed unconditionally, always stop
the timer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Roman Gilg <subdiff@gmail.com>
There's no real point - if we don't have EGL then the extension check is
also going to fail - and the entrypoint is new in 1.5.0, which we don't
need to require yet.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
This adds initial support for displaying Xwayland applications through
the use of EGLStreams and nvidia's custom wayland protocol by adding
another egl_backend driver. This also adds some additional egl_backend
hooks that are required to make things work properly.
EGLStreams work a lot differently then the traditional way of handling
buffers with wayland. Unfortunately, there are also a LOT of various
pitfalls baked into it's design that need to be explained.
This has a very large and unfortunate implication: direct rendering is,
for the time being at least, impossible to do through EGLStreams. The
main reason being that the EGLStream spec mandates that we lose the
entire color buffer contents with each eglSwapBuffers(), which goes
against X's requirement of not losing data with pixmaps. no way to use
an allocated EGLSurface as the storage for glamor rendering like we do
with GBM, we have to rely on blitting each pixmap to it's respective
EGLSurface producer each frame. In order to pull this off, we add two
different additional egl_backend hooks that GBM opts out of
implementing:
- egl_backend.allow_commits for holding off displaying any EGLStream
backed pixmaps until the point where it's stream is completely
initialized and ready for use
- egl_backend.post_damage for blitting the content of the EGLStream
surface producer before Xwayland actually damages and commits the
wl_surface to the screen.
The other big pitfall here is that using nvidia's wayland-eglstreams
helper library is also not possible for the most part. All of it's API
for creating and destroying streams rely on being able to perform a
roundtrip in order to bring each stream to completion since the wayland
compositor must perform it's job of connecting a consumer to each
EGLstream. Because Xwayland has to potentially handle both responding to
the wayland compositor and it's own X clients, the situation of the
wayland compositor being one of our X clients must be considered. If we
perform a roundtrip with the Wayland compositor, it's possible that the
wayland compositor might currently be connected to us as an X client and
thus hang while both Xwayland and the wayland compositor await responses
from eachother. To avoid this, we work directly with the wayland
protocol and use wl_display_sync() events along with release() events to
set up and destroy EGLStreams asynchronously alongside handling X
clients.
Additionally, since setting up EGLStreams is not an atomic operation we
have to take into consideration the fact that an EGLStream can
potentially be created in response to a window resize, then immediately
deleted due to another pending window resize in the same X client's
pending reqests before Xwayland hits the part of it's event loop where
we read from the wayland compositor. To make this even more painful, we
also have to take into consideration that since EGLStreams are not
atomic that it's possible we could delete wayland resources for an
EGLStream before the compositor even finishes using them and thus run
into errors. So, we use quite a bit of tracking logic to keep EGLStream
objects alive until we know the compositor isn't using them (even if
this means the stream outlives the pixmap it backed).
While the default backend for glamor remains GBM, this patch exists for
users who have had to deal with the reprecussion of their GPU
manufacturers ignoring the advice of upstream and the standardization of
GBM across most major GPU manufacturers. It is not intended to be a
final solution to the GBM debate, but merely a baindaid so our users
don't have to suffer from the consequences of companies avoiding working
upstream. New drivers are strongly encouraged not to use this as a
backend, and use GBM like everyone else. We even spit this out as an
error from Xwayland when using the eglstream backend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just a small autogenerated header that will soon contain more then just
one macro.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This takes all of the gbm related code in wayland-glamor.c and moves it
into it's own EGL backend for Xwayland, xwayland-glamor-gbm.c.
Additionally, we add the egl_backend struct into xwl_screen in order to
provide hooks for alternative EGL backends such as nvidia's EGLStreams.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Regardless of the order we un-realize windows.
Suggested-by: Roman Gilg <subdiff@gmail.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
xwl_unrealize_window() would use freed xwl_window which can lead to
various memory corruption and crashes, as reported by valgrind:
Invalid read of size 8
at 0x42C802: xwl_present_cleanup (xwayland-present.c:84)
by 0x42BA67: xwl_unrealize_window (xwayland.c:601)
by 0x541EE9: compUnrealizeWindow (compwindow.c:285)
by 0x57E1FA: UnrealizeTree (window.c:2816)
by 0x581189: UnmapWindow (window.c:2874)
by 0x54EB26: ProcUnmapWindow (dispatch.c:879)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
Address 0xf520f60 is 96 bytes inside a block of size 184 free'd
at 0x4C2EDAC: free (vg_replace_malloc.c:530)
by 0x42B9FB: xwl_unrealize_window (xwayland.c:624)
by 0x541EE9: compUnrealizeWindow (compwindow.c:285)
by 0x57E1FA: UnrealizeTree (window.c:2816)
by 0x581189: UnmapWindow (window.c:2874)
by 0x54EB26: ProcUnmapWindow (dispatch.c:879)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
Block was alloc'd at
at 0x4C2FB06: calloc (vg_replace_malloc.c:711)
by 0x42B307: xwl_realize_window (xwayland.c:488)
by 0x541E59: compRealizeWindow (compwindow.c:268)
by 0x57DA40: RealizeTree (window.c:2617)
by 0x580B28: MapWindow (window.c:2694)
by 0x54EA2A: ProcMapWindow (dispatch.c:845)
by 0x554B7D: Dispatch (dispatch.c:479)
by 0x558BE5: dix_main (main.c:276)
by 0x7C4B1BA: (below main) (libc-start.c:308)
This is because UnrealizeTree() traverses the tree from top to bottom,
which invalidates the assumption that if the Window doesn't feature an
xwl_window on its own, it's the xwl_window of its first ancestor with
one.
This reverts commit 82df2ce3
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Present support in Xwayland relies on glamor, make sure Xwayland can
be built without glamor by moving references to Present code inside
the conditional GLAMOR_HAS_GBM.
Reported-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Turns out that's legal, and xts exercises it, and we crash:
Thread 1 "Xwayland" received signal SIGSEGV, Segmentation fault.
dixGetPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:122
122 return (char *) (*privates) + key->offset;
(gdb) bt
#0 dixGetPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:122
#1 dixLookupPrivate (key=0x813660 <xwl_window_private_key>, privates=0x20) at ../../include/privates.h:166
#2 xwl_window_of_top (window=0x0) at xwayland.c:128
#3 xwl_cursor_warped_to (device=<optimized out>, screen=0x268b6e0, client=<optimized out>, window=0x0, sprite=0x300bb30,
x=2400, y=1350) at xwayland.c:292
#4 0x00000000005622ec in ProcWarpPointer (client=0x32755d0) at events.c:3618
In this case, x/y are the screen-space coordinates where the pointer
ends up, and we need to look up the (X) window there.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The caller may ignore the return value (will be addressed with later
commit) so simply zero the count from the get-go. We're pretty much do
so, in all cases but one :-\
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The caller may ignore the return value (will be addressed with later
commit) so simply zero the count from the get-go. We're pretty much do
so, in all cases but one :-\
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
It makes it perfectly clear that we should not be modifying them.
Should help highlight issues like the one fixed with previous commit.
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The glamor_pixmap_from_fds error path erroneously closes the fds.
We don't own them, plus the caller closes them after the function in
called.
Fixes: cef12efc15 ("glamor: Implement GetSupportedModifiers")
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
dri3_screen_info is the user provide dispatch. Something that we do
not and should not change.
When using the _ptr typecast + const the compiler barfs at us
(rightfully so), so use the _rec one.
[Silence a new const mismatch warning too - ajax]
Fixes: 5631382988 ("dri3: Add DRI3 extension")
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
[735/786] Generating 'hw/xwayland/Xwayland@exe/relative-pointer-unstable-v1-protocol.c'.
Using "code" is deprecated - use private-code or public-code.
See the help page for details.
Use private-code if wayland-scanner is new enough.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Link the newly introduced support for Present flips. For now flips can only
be used in rootless mode together with Glamor.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Queue present events to msc values. Fake msc events with a refresh rate of
about 60fps when flips are not possible. When flips are executed rely on
frame callbacks with a slow updating timer as fallback.
This is important for applications, that want to limit their framerate.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the compositor is not sending frame callbacks while we still wait
on buffer release events fake a continuous msc counter with a timer.
Having this timer is a prerequisite for queuing events.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Introduce support for Present's window flip mode. The support is not yet
complete, but works reasonable well for the most important use case, that
is fullscreen applications.
We take a Present flip and if the xwl_window->window has the same dimensions
as the presenting window, the flip is represented by a wl_buffer and attached
to the main wl_surface of the xwl_window.
After commit we are listening for the sync callback in order to tell Present,
that the pixmap flip is not longer pending, for the frame callback in order
to update the msc counter and for the buffer release callback in order to tell
Present that the pixmap is idle again.
The following functionality is missing from this patch:
* (slowed down) flips in case the compositor is not sending frame callbacks,
* queuing events to MSC times,
* per window flips for child windows with smaller size than the xwl_window.
To make use of this functionality Xwayland must run rootless and with
Glamor/GBM.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add arguments to give the caller more information and control
over the creation of a wl_buffer with GBM, in particular let
the caller determine the size of the buffer.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Using modifier might allow the driver to use a more optimal format
(e.g. tiled/compressed). Let's try to use those if possible.
v2: Don't filter out multi-plane modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It relies on GBM >= 17.1.0 where we can import BO with multiple
planes and a format modifier (GBM_BO_IMPORT_FD_MODIFIER).
v2: Properly free fds in Xwayland
[Also add glamor_egl_ext.h to Makefile.am for distcheck's sake - ajax]
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Initial implementation for DRI3 v1.1. Only the DRI3 implementation
is there, backends need to implement the proper hooks.
Version is still set to 1.0 so clients shouldn't use the new
requests yet.
v2: Use depth/bpp instead of DRM formats in requests
v3: Remove DMA fence requests from v1.1
Add screen/drawable modifier sets
v4: Free array returned by 'get_drawable_modifiers()'
v5: Fix FD leak
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When xdg_output support was added to Xwayland, need_rotate parameter was
added to output_get_new_size where true gave you the old pre-xdg_output
behavior and false gave the new behavior. Unfortunately, the two places
where this is called, need_rotate was set backwards. This caused input
get clampped to the wrong dimensions. Also, the logic for deciding
whether or not to flip was wrong because, if need_rotate was false, it
would always flip which is not what you want.
v2 (Daniel Stone):
- Fix output_get_new_size so that it doesn't flip the dimensions when
need_rotate is false.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Add a stub for Xnest so it continues to link, but otherwise we support
GLX on every server so there's no need to make every DDX add it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The big change here is MakeCurrent and context tag tracking. We now
delegate context tags entirely to the vnd layer, and simply store a
pointer to the context state as the tag data. If a context is deleted
while it's current, we allocate a fake ID for the context and move the
context state there, so the tag data still points to a real context. As
a result we can stop trying so hard to detach the client from contexts
at disconnect time and just let resource destruction handle it.
Since vnd handles all the MakeCurrent protocol now, our request handlers
for it can just be return BadImplementation. We also remove a bunch of
LEGAL_NEW_RESOURCE, because now by the time we're called vnd has already
allocated its tracking resource on that XID.
v2: Update to match v2 of the vnd import, and remove more redundant work
like request length checks.
v3: Add/remove the XID map from the vendor private thunk, not the
backend. (Kyle Brenneman)
v4: Fix deletion of ghost contexts (Kyle Brenneman)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Unfortunately, on my machine Xwayland immediately crashes when I try to
start it. gdb backtrace:
#0 0x00007ffff74f0e79 in wl_proxy_marshal () from target:/lib64/libwayland-client.so.0
#1 0x0000000000413172 in zwp_confined_pointer_v1_destroy (zwp_confined_pointer_v1=0x700000000)
at hw/xwayland/Xwayland@exe/pointer-constraints-unstable-v1-client-protocol.h:612
#2 0x0000000000418bc0 in xwl_seat_destroy_confined_pointer (xwl_seat=0x8ba2a0)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2839
#3 0x0000000000418c09 in xwl_seat_unconfine_pointer (xwl_seat=0x8ba2a0)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2849
#4 0x0000000000410d97 in xwl_cursor_confined_to (device=0xa5a000, screen=0x8b9d80, window=0x9bdb70)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland.c:328
#5 0x00000000004a8571 in ConfineCursorToWindow (pDev=0xa5a000, pWin=0x9bdb70, generateEvents=1,
confineToScreen=0) at /home/lyudess/Projects/xserver/dix/events.c:900
#6 0x00000000004a94b7 in ScreenRestructured (pScreen=0x8b9d80)
at /home/lyudess/Projects/xserver/dix/events.c:1387
#7 0x0000000000502386 in RRScreenSizeNotify (pScreen=0x8b9d80)
at /home/lyudess/Projects/xserver/randr/rrscreen.c:160
#8 0x000000000041a83c in update_screen_size (xwl_output=0x8e7670, width=3840, height=2160)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:203
#9 0x000000000041a9f0 in apply_output_change (xwl_output=0x8e7670)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:252
#10 0x000000000041aaeb in xdg_output_handle_done (data=0x8e7670, xdg_output=0x8e7580)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-output.c:307
#11 0x00007ffff50e9d1e in ffi_call_unix64 () at ../src/x86/unix64.S:76
#12 0x00007ffff50e968f in ffi_call (cif=<optimized out>, fn=<optimized out>, rvalue=<optimized out>,
avalue=<optimized out>) at ../src/x86/ffi64.c:525
#13 0x00007ffff74f3d8b in wl_closure_invoke () from target:/lib64/libwayland-client.so.0
#14 0x00007ffff74f0928 in dispatch_event.isra () from target:/lib64/libwayland-client.so.0
#15 0x00007ffff74f1be4 in wl_display_dispatch_queue_pending () from target:/lib64/libwayland-client.so.0
#16 0x00007ffff74f200b in wl_display_roundtrip_queue () from target:/lib64/libwayland-client.so.0
#17 0x0000000000418cad in InitInput (argc=12, argv=0x7fffffffd9c8)
at /home/lyudess/Projects/xserver/hw/xwayland/xwayland-input.c:2867
#18 0x00000000004a20e3 in dix_main (argc=12, argv=0x7fffffffd9c8, envp=0x7fffffffda30)
at /home/lyudess/Projects/xserver/dix/main.c:250
#19 0x0000000000420cb2 in main (argc=12, argv=0x7fffffffd9c8, envp=0x7fffffffda30)
at /home/lyudess/Projects/xserver/dix/stubmain.c:34
This appears to be the result of xwl_cursor_confined_to() and
xwl_screen_get_default_seat(). While not against protocol, mutter ends
up sending xdg_output before wl_seat. xwl_screen_get_default_seat()
makes the naïve assumption that we always have a valid seat, we end up
returning a pointer to the empty list itself instead of an actual seat
and causing ourselves to segfault.
So, actually return NULL in xwl_screen_get_default_seat() if the seat
list is empty, and skip any pointer confinement processing in
xwl_cursor_confined_to() when we don't have a seat setup yet.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Place a manual redirect on windows on xwl_realize_window() and remove
it on xwl_unrealize_window() to avoid the X11 window manager removing
its redirect before Xwayland has unrealized the window (e.g. if the X11
window manager has terminated unexpectedly)
Suggested by Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This is a rare occurrence of a crash in Xwayland for which I don't have
the reproducing steps, just a core file.
The backtrace looks as follow:
#0 raise () from /usr/lib64/libc.so.6
#1 abort () from /usr/lib64/libc.so.6
#2 OsAbort () at utils.c:1361
#3 AbortServer () at log.c:877
#4 FatalError () at log.c:1015
#5 OsSigHandler () at osinit.c:154
#6 <signal handler called>
#7 xwl_glamor_pixmap_get_wl_buffer () at xwayland-glamor.c:162
#8 xwl_screen_post_damage () at xwayland.c:514
#9 block_handler () at xwayland.c:665
#10 BlockHandler () at dixutils.c:388
#11 WaitForSomething () at WaitFor.c:219
#12 Dispatch () at dispatch.c:422
#13 dix_main () at main.c:287
The crash is caused by dereferencing “xwl_pixmap->buffer” in
xwl_glamor_pixmap_get_wl_buffer() because “xwl_pixmap” is NULL.
Reason for this is because the corresponding pixmap is from the root
window and xwayland is rootless by default.
This can happen if the window was mapped, redirected, damaged and
unredirected immediately, before the damage is processed by Xwayland.
Make sure to remove the dirty window from the damage list on unrealize
to prevent this from happening.
Credit goes to Adam Jackson <ajax@nwnk.net> and Daniel Stone
<daniel@fooishbar.org> for finding the root cause the issue.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
BTN_STYLUS3 has been introduced by the Linux 4.15 kernel to report the
status of the third button present on Wacom's new "Pro Pen 3D" stylus.
Treat this button like xf86-input-wacom and send a button 8 event
("navigate back") when received from Wayland.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The xdg-output protocol aims at describing outputs in way which is
more in line with the concept of an output on desktop oriented systems.
For now it just features the position and logical size which describe
the output position and size in the global compositor space.
This is however much useful for Xwayland to advertise the output size
and position to X11 clients which need this to configure their surfaces
in the global compositor space as the compositor may apply a different
scale from what is advertised by the output scaling property (to achieve
fractional scaling, for example).
This was added in wayland-protocols 1.10.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
If an X11 app draws a little here, some there, and a tiny bit in the
opposite corner, using RegionExtents for the damage to be sent to the
Wayland compositor will cause massive over-damaging.
However, we cannot blindly send an arbitrary number of damage
rectangles, because there is a risk of overflowing the Wayland
connection. If that happens, it triggers an abort in libwayland-client.
Try to be more accurate with the damage by sending up to 256 rectangles
per window, and fall back to extents otherwise. The number is completely
arbitrary.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When the Wayland compositor notifies of a new keymap, for the first X11
client using the keyboard, the last slave keyboard used might still not
be set (i.e. “lastSlave” is still NULL).
As a result, the new keymap is not applied, and the first X11 window
will have the wrong keymap set initially.
Apply the new keymap to the master keyboard as long as there's one.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=791383
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland is a pretty standard Wayland client, we want to be able to
capture core dumps on crashes.
Yet using "-core" causes any FatalError() to generate a core dump,
meaning that we would get a core file for all Wayland server crashes,
which would generate a lot of false positives.
Instead of using FatalError() on Wayland socket errors, give up cleanly
to avoid dumping core files when "-core" is used.
See also: https://bugzilla.gnome.org/show_bug.cgi?id=790502
and: https://bugzilla.gnome.org/show_bug.cgi?id=789086
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The tablet/stylus interfaces reused xwl_seat->focus_window, which
would leave a somewhat inconsistent state of that variable for
wl_pointer purposes (basically, everything) if the pointer happened
to lay on the same surface than the stylus while proximity_out
happens.
We just want the stylus xwl_window to correctly determine we have
stylus focus, and to correctly translate surface-local coordinates
to root coordinates, this can be done using a different variable.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
From the bug: "What happens if bits->width is less than 8? :)"
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=103012
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It doesn't matter, none of this matters.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Calling xwl_window_from_window means looping through the window ancestor
chain whenever it is called on a child window or on an automatically
redirected window.
Since these properties and the potential ancestor's xwl_window are constant
between window realization and unrealization, we can omit the looping by
always putting the respective xwl_window in the Window's private field on
its realization. If the Window doesn't feature an xwl_window on its own,
it's the xwl_window of its first ancestor with one.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Not all compositors allow for customizing the Xwayland command line,
gnome-shell/mutter for example have the command line and path to
Xwayland binary hardcoded, which makes it harder for users to disable
glamor acceleration in Xwayland (glamor being used by default).
Add an environment variable XWAYLAND_NO_GLAMOR to disable glamor support
in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Xwayland would crash in some circumstances while trying to issue a
pointer locking when the cursor is hidden when there is no seat focus
window set.
The crash signature looks like:
#0 zwp_pointer_constraints_v1_lock_pointer ()
#1 xwl_pointer_warp_emulator_lock () at xwayland-input.c:2584
#2 xwl_seat_maybe_lock_on_hidden_cursor () at xwayland-input.c:2756
#3 xwl_seat_maybe_lock_on_hidden_cursor () at xwayland-input.c:2765
#4 xwl_seat_cursor_visibility_changed () at xwayland-input.c:2768
#5 xwl_set_cursor () at xwayland-cursor.c:245
#6 miPointerUpdateSprite () at mipointer.c:468
#7 miPointerDisplayCursor () at mipointer.c:206
#8 CursorDisplayCursor () at cursor.c:150
#9 AnimCurDisplayCursor () at animcur.c:220
#10 ChangeToCursor () at events.c:936
#11 ActivatePointerGrab () at events.c:1542
#12 GrabDevice () at events.c:5120
#13 ProcGrabPointer () at events.c:4908
#14 Dispatch () at dispatch.c:478
#15 dix_main () at main.c:276
xwl_pointer_warp_emulator_lock() tries to use the surface from the
xwl_seat->focus_window leading to a NULL pointer dereference when that
value is NULL.
Check that xwl_seat->focus_window is not NULL earlier in the stack in
xwl_seat_maybe_lock_on_hidden_cursor() and return early if not the case
to avoid the crash.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102474
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the compositor has no support for the Xwayland keyboard grab
protocol, there is no need to set-up our keyboard grab handler.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The version detect was erroring out with 1.9 protos installed, and we
weren't building the new code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The keyboard grabbing protocol for Xwayland is included in
wayland-protocol 1.9.
Update the wayland-protocol required version in both configure and meson
builds and add support for this new protocol in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
... where it is named src/egl/wayland/wayland-drm/wayland-drm.xml and
has its requests sorted by protocol version number, avoiding a warning
from wayland-scanner.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The 'tablet_tool_wheel' function for tablet scrolling was added back in
8a1defcc63 but left unimplemented. This commit fills in the necessary
details, using the "clicks" count as the number of discrete scroll up/down
events to send.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The 'tablet_tool_frame' function treats the button masks as though they
are zero-indexed, but 'tablet_tool_button_state' treats them as one-
indexed. The result is that an e.g. middle click event recieved from
Wayland will be sent from the X server as a right-click instead.
Fixes: 773b04748d ("xwayland: handle button events after motion events")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland doesn't override these, so we don't need defining those
in the xwl_screen struct.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the typical pattern in games of "hide cursor, grab with a confineTo,
warp constantly the pointer to the middle of the window" the last warping
step is actually rather optional. Some games may choose to just set up a
grab with confineTo argument, and trust that they'll get correct relative
X/Y axis values despite the hidden cursor hitting the confinement window
edge.
To cater for these cases, lock the pointer whenever there is a pointer
confinement and the cursor is hidden. This ensures the pointer position
is in sync with the compositor's when it's next shown again, and more
importantly resorts to the relative pointer for event delivery.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes grabs on InputOnly windows whose parent is the root window
failing with GrabNotViewable. This is due to window->borderSize/windowSize
being computed as clipped by its parent, resulting in a null region.
Setting up the right size on the root window makes the InputOnly size
correct too, so the GrabNotViewable paths aren't hit anymore.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Of sorts, actually make it confine to the pointer focus, as the
InputOnly window is entirely invisible to xwayland accounting,
we don't have a xwl_window for it.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Of sorts, as we can't honor pointer warping across the whole root window
coordinates, peek the pointer focus in these cases.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All that was left here was updating the FBO's size. However, the FBO
size was always set correctly already through
glamor_set_pixmap_texture() from whoever had attached a new BO to the
pixmap.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
When running an Xwayland server from the command line, we end up
resetting the server every time all of the clients connected to the
server leave. This would be fine, except that xwayland makes the mistake
of unconditionally calling LoadExtensionList(). This causes us to setup
the glxExtension twice in a row which means that when we lose our last
client on the second server generation, we end up trying to call the glx
destructors twice in a row resulting in a segfault:
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x70845bf]
(EE) 2: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x32897d) [0x1196e5bd]
(EE) 3: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x328a45) [0x1196e745]
(EE) 4: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x32665f) [0x11969f7f]
(EE) 5: Xwayland (__glXDRIscreenDestroy+0x30) [0x54686e]
(EE) 6: Xwayland (glxCloseScreen+0x3f) [0x5473db]
(EE) 7: Xwayland (glxCloseScreen+0x53) [0x5473ef]
(EE) 8: Xwayland (dix_main+0x7b6) [0x44c8c9]
(EE) 9: Xwayland (main+0x28) [0x61c503]
(EE) 10: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x72b1401]
(EE) 11: Xwayland (_start+0x2a) [0x4208fa]
(EE) 12: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x18
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Easy reproduction recipe:
- Start an Xwayland session with the default settings
- Open a window
- Close that window
- Open another window
- Close that window
- Total annihilation occurs
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the event that xwayland gets launched on a wayland compositor that
doesn't yet have support for wp_tablet_manager, we end up skipping the
initialization of the lists. This is wrong, because regardless of
whether or not a tablet is present we still attempt to traverse these
lists later in xwl_set_cursor(), expecting that if the lists are empty
from no tablet manager that we simply won't execute any loop iterations.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x7f73722545bf]
(EE) 2: Xwayland (xwl_set_cursor+0x9f) [0x429974]
(EE) 3: Xwayland (miPointerUpdateSprite+0x261) [0x4fe1ca]
(EE) 4: Xwayland (mieqProcessInputEvents+0x239) [0x4f8d33]
(EE) 5: Xwayland (ProcessInputEvents+0x9) [0x4282f0]
(EE) 6: Xwayland (Dispatch+0x42) [0x43e2d4]
(EE) 7: Xwayland (dix_main+0x5c9) [0x44c6dc]
(EE) 8: Xwayland (main+0x28) [0x61c523]
(EE) 9: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x7f7371e9d401]
(EE) 10: Xwayland (_start+0x2a) [0x4208fa]
(EE) 11: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x28
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Reproduced when trying to run upstream xwayland under fedora 25's weston
package.
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hooked up a bit differently to the other tools. Those tools can be static for
all and be re-used. The wacom driver initializes the pad with the correct
number of buttons though and we can't do this until we have the pad done event.
If the tablet is removed and we plug a different one in, we should initialize
that correctly, so unlike the other tools the pad is properly removed and
re-initialized on plug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Each xwl_tablet_tool gets a xwl_cursor, as on wayland each of those
will get an independent cursor that can be set through
zwp_tablet_tool.set_cursor.
However, all tools (and the pointer) share conceptually the same VCP
on Xwayland, so have cursor changes trigger a xwl_cursor update on
every tool (and the pointer, again). Maybe Xwayland could keep track
of the most recent device and only update that cursor to get better
visual results, but this is simpler, and it's going to be odd
anyway...
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This struct takes away the cursor info in xwl_seat, and has
an update function so we can share the frame handling code
across several xwl_cursors.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Make sure the button events are sent after the motion events into the new
position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Translates Wayland tablet events into corresponding X11 tablet events. As
with the prior commit, these events are modeled after those created by the
xf86-input-wacom driver to maximize compatibility with existing applications.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Creates and maintains the canonical trio of X devices (stylus, eraser,
and cursor) to be shared by all connected tablets. A per-tablet trio
could be created instead, but there are very few benefits to such a
configuration since all tablets still ultimately share control of a
single master pointer.
The three X devices are modeled after those created by xf86-input-wacom
but use a generic maximum X and Y that should be large enough to
accurately represent values from even the largest currently-available
tablets.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
The wp_tablet_seat interface provides us with notifications as tablets,
tools, and pads are connected to the system. Add listener functions and
store references to the obtained devices.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
If we're notified about the existence of the wp_tablet_manager interface,
we bind to it so that we can make use of any tablets that are (or later
become) available. For each seat that exists or comes into existance at
a later point, obtain the associated tablet_seat.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Be more precise in describing the return value.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Client resources can survive the client itself, in which case we
may end up in our sync callback trying to access client's data after
it's been freed/reclaimed.
Add a ClientStateCallback handler to monitor the client state changes
and clear the sync callback set up by the glamor drm code if any.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
After an X cursor is unrealized, the seat's corresponding x_cursor is
cleared, but if a frame callback was pending at the time, it will
remain and thus prevent any further cursor update, leaving the window
with no cursor.
Make sure to destroy the frame callback, if any, when that occurs, so
that next time a cursor needs to be set, it won't be ignored for a frame
callback that will never be triggered.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1389327
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Rui Matos <tiagomatos@gmail.com>
in XWayland, dri3_send_open_reply() is called from a sync callback, so
there is a possibility that the client might be gone when we get to the
callback eventually, which leads to a crash in _XSERVTransSendFd() from
WriteFdToClient() .
Check if clientGone has been set in the sync callback handler to avoid
this.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99149
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1416553
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
keyboard_check_repeat() fetches the XWayland seat from the
dev->public.devicePrivate do do its thing.
If a key event is sent programmatically through Xtest, our device is the
virtual core keyboard and that has a dev->public.devicePrivate of NULL,
leading to a segfault in keyboard_check_repeat().
This is the case with "antimicro" which sends key events based on the
joystick buttons.
Don't set the checkRepeat handler on the VCK since it cannot possibly work
anyway and it has no effect on the actual checkRepeat intended functionality.
Bugzilla: https://bugzilla.redhat.com/1416244
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
During the InitInput() phase, the wayland events get dequeued so we
can possibly end up calling dispatch_pointer_motion_event().
If this occurs before xwl_seat->focus_window is set, it leads to a NULL
pointer derefence and a segfault.
Check for xwl_seat->focus_window in both pointer_handle_frame() and
relative_pointer_handle_relative_motion() prior to calling
dispatch_pointer_motion_event() like it's done in
pointer_handle_motion().
Bugzilla: https://bugzilla.redhat.com/1410804
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The X11 window manager (XWM) of a Wayland compositor can use the
_XWAYLAND_ALLOW_COMMITS property to control when Xwayland sends
wl_surface.commit requests. If the property is not set, the behaviour
remains what it was.
XWM uses the property to inhibit commits until the window is ready to be
shown. This gives XWM time to set up the window decorations and internal
state before Xwayland does the first commit. XWM can use this to ensure
the first commit carries fully drawn decorations and the window
management state is correct when the window becomes visible.
Setting the property to zero inhibits further commits, and setting it to
non-zero allows commits. Deleting the property allows commits.
When the property is changed from zero to non-zero, there will be a
commit on next block_handler() call provided that some damage has been
recorded.
Without this patch (i.e. with the old behaviour) Xwayland can and will
commit the surface very soon as the application window has been realized
and drawn into. This races with XWM and may cause visible glitches.
v3:
- introduced a simple setter for xwl_window::allow_commits
- split xwl_window_property_allow_commits() out of
xwl_property_callback()
- check MakeAtom(_XWAYLAND_ALLOW_COMMITS)
v2:
- use PropertyStateCallback instead of XACE, based on the patch
"xwayland: Track per-window support for netwm frame sync" by
Adam Jackson
- check property type is XA_CARDINAL
- drop a useless memcpy()
Weston Bug: https://phabricator.freedesktop.org/T7622
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix the following warning due to --disable-glamor:
CC Xwayland-xwayland.o
In file included from /home/pq/local/include/wayland-client.h:40:0,
from xwayland.h:35,
from xwayland.c:26:
xwayland.c: In function ‘block_handler’:
/home/pq/local/include/wayland-client-protocol.h:3446:2: warning: ‘buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
wl_proxy_marshal((struct wl_proxy *) wl_surface,
^
xwayland.c:466:23: note: ‘buffer’ was declared here
struct wl_buffer *buffer;
^
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Refactor xwl_screen_post_damage() and split the window specific code
into a new function xwl_window_post_damage().
This is a pure refactoring, there are no behavioral changes. An assert
is added to xwl_window_post_damage() to ensure frame callbacks are not
leaked if a future patch changes the call.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Previously, we would swap the width/height of the Xwayland output based
on the output rotation, so that the overall screen size would match the
actual rotation of each output.
Problem is the RandR's ConstrainCursorHarder() handler will also apply
the output rotation, meaning that when the output is rotated, the
pointer will be constrained within the wrong dimension.
Moreover, XRandR assumes the original output width/height are unchanged
when the output is rotated, so by changing the Xwayland output width and
height based on rotation, Xwayland causes XRandr to report the wrong
output sizes (an output of size 1024x768 rotated left or right should
remain 1024x768, not 768x1024).
So to avoid this issue and keep things consistent between Wayland and
Xwayland outputs, leave the actual width/height unchanged but apply the
rotation when computing the screen size. This fixes both the output size
being wrong in "xrandr -q" and the pointer being constrained in the
wrong dimension with rotated with weston.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the Wayland compositor sets a rotation on the output, Xwayland
translates the transformation as an xrandr rotation for the given
output.
However, if the rotation is not supported by the CRTC, this is not
a valid setup and xrandr queries will fail.
Pretend we support all rotations and reflections so that the
configuration remains a valid xrandr setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For some applications (like fullscreen games) it matters for XRandr
resolution to be correctly set and equal to root window resolution.
In XServer there is already hack for this, adapted it for XWayland.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99574
Signed-off-by: Svitozar Cherepii <razotivs@gmail.com>
Tested-by: Svitozar Cherepii <razotivs@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Sometimes, Xwayland will try to use a cursor that has just been freed,
leading to a crash when trying to access that cursor data either in
miPointerUpdateSprite() or AnimCurTimerNotify().
CheckMotion() updates the pointer's cursor based on which xwindow
XYToWindow() returns, and Xwayland implements its own xwl_xy_to_window()
to fake a crossing to the root window when the pointer has left the
Wayland surface but is still within the xwindow.
But after an xwindow is unrealized, the last xwindow used to match the
xwindows is cleared so two consecutive calls to xwl_xy_to_window() may
not return the same xwindow.
To avoid this issue, update the last_xwindow based on enter and leave
notifications instead of xwl_xy_to_window(), and check if the xwindow
found by the regular miXYToWindow() is a child of the known last
xwindow, so that multiple consecutive calls to xwl_xy_to_window()
return the same xwindow, being either the one found by miXYToWindow()
or the root window.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1385258
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Vít Ondruch <vondruch@redhat.com>
Tested-by: Satish Balay <balay@fastmail.fm>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Commits 816015648f and
fee0827a9a made it so that
wl_keyboard::enter doesn't result in X clients getting KeyPress events
while still updating our internal xkb state to be in sync with the
host compositor.
wl_keyboard::leave needs to be handled in the same way as its
semantics from an X client POV should be the same as an X grab getting
triggered, i.e. X clients shouldn't get KeyRelease events for keys
that are still down at that point.
This patch uses LeaveNotify for these events on wl_keyboard::leave and
changes the current use of KeymapNotify to EnterNotify instead just to
keep some symmetry between both cases.
On ProcessDeviceEvent() we still need to deactivate X grabs if needed
for KeyReleases.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition by the manual is:
calloc(size_t nmemb, size_t size)
Swap the arguments of calloc() calls to be the right way around.
Presumably this makes no functional difference, but better follow the
spec.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not needed anymore now that mipointer exposes an API for that,
miPointerInvalidateSprite()
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
posix_fallocate() does an explicit rollback if it gets EINTR, and
this is a problem on slow systems because when the allocation size
is sufficiently large posix_fallocate() will always be interrupted
by the smart scheduler's SIGALRM.
Changes since v1 - big comment in the code to explain what is going on
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
On some random condition, a touch event may trigger a crash in Xwayland
in GetTouchEvents().
The (simplified) backtrace goes as follow:
(gdb) bt
#0 GetTouchEvents() at getevents.c:1892
#1 QueueTouchEvents() at getevents.c:1866
#2 xwl_touch_send_event() at xwayland-input.c:652
#5 wl_closure_invoke() from libwayland-client.so.0
#6 dispatch_event() from libwayland-client.so.0
#7 wl_display_dispatch_queue_pending() from libwayland-client.so.0
#8 xwl_read_events() at xwayland.c:483
#9 ospoll_wait() at ospoll.c:412
#10 WaitForSomething() at WaitFor.c:222
#11 Dispatch() at dispatch.c:412
#12 dix_main() at main.c:287
#13 __libc_start_main() at libc-start.c:289
#14 _start ()
The crash occurs when trying to access the sprite associated with the
touch device, which appears to be NULL. Reason being the device itself
is more a keyboard device than a touch device.
Moreover, it appears the device is neither enabled nor activated
(inited=0, enabled=0) which doesn't seem right, but matches the code in
init_touch() from xwayland-input.c which would enable the device if it
was previously existing and otherwise would create the device but not
activate it.
Make sure we do activate and enable touch devices just like we do for
other input devices such as keyboard and pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Pointer enter event coordinates are surface relative and we need them to
be screen relative for pScreen->SetCursorPosition().
https://bugzilla.gnome.org/show_bug.cgi?id=758283
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
eglGetDisplay forces the implementation to guess which kind of display
it's been handed. glvnd does something different from Mesa, and in
general it's impossible for the library to get this right. Add a new
inline that gets the logic right, and works around a quirk in epoxy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Emulate pointer warps by locking the pointer and sending relative
motion events instead of absolute. X will keep track of the "fake"
pointer cursor position given the relative motion events, and the
client warping the cursor will warp the faked cursor position.
Various requirements need to be met for the pointer warp emulator to
enable:
The cursor must be invisible: since it would not be acceptable that a
fake cursor position would be different from the visual representation
of the cursor, emulation can only be done when there is no visual
representation done by the Wayland compositor. Thus, for the emulator
to enable, the cursor must be hidden, and would the cursor be displayed
while the emulator is active, the emulator would be destroyed.
The window that is warped within must be likely to have pointer focus.
For example, warping outside of the window region will be ignored.
The pointer warp emulator will disable itself once the fake cursor
position leaves the window region, or the cursor is made visible.
This makes various games depending on pointer warping (such as 3D
first-person shooters and stategy games using click-to-drag-map like
things) work.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Translate grabbing a pointer device with confineTo set to a window into
confining the Wayland pointer using the pointer constraints protocol.
This makes clients that depend on the pointer not going outside of the
window region, such as certain games and virtual machines viewers, to
function more properly.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If there was an relative pointer motion within the same frame as an
absolute pointer motion, provide both the absolute coordinate and the
unaccelerated delta when setting the valuator mask.
If a frame contained only a relative motion, queue an absolute motion
with an unchanged position, but still pass the unaccelerated motion
event.
If the wl_seat advertised by the compositor is not new enough, assume
each relative and absolute pointer motion arrives within their own
separate frames.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Wait until wl_pointer.frame with dispatching the pointer motion event,
if wl_pointer.frame is supported by the compositor. This will later be
used to combine unaccelerated motion deltas with the absolute motion
delta.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Generating relative and absolute movement events from the same input
device is problematic, because an absolute pointer device doesn't
expect to see any relative motion events. To be able to generate
relative pointer motion events including unaccelerated deltas, create a
secondary pointer device 'xwayland-relative-pointer', and use that for
emitting relative motion events.
Signed-off-by: Krzysztof Sobiecki <sobkas@gmail.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Put device class initialization in init_[device_class](xwl_seat) and
releasing in release_[device class](xwl_seat). The purpose is to make
it easier to add more type of initialization here later, without making
the function too large.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Will be used for getting unaccelerated motion events and later for
relative motions used by a pointer warp emulator.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The way we map the touch absolute device to screen coordinates can't
work across wl_output mode and geometry events. Instead, set up
a fixed coordinate space, and transform touch events according to
the screen coordinate space as they happen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
The checks in xwayland's XYToWindow handler pretty much assumes that the
sprite is managed by the wl_pointer, which is not entirely right, given
1) The Virtual Core Pointer may be controlled from other interfaces, and
2) there may be other SpriteRecs than the VCP's.
This makes XYToWindow calls return a sprite trace with just the root
window if any of those two assumptions are broken, eg. on touch events.
So turn the check upside down, first assume that the default XYToWindow
proc behavior is right, and later cut down the spriteTrace if the
current device happens to be the pointer and is out of focus. We work
our way to the device's lastSlave here so as not to break assumption #1
above.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
In Xwayland's xwl_unrealize_cursor(), the x_cursor is cleared up only
when a device value is provided to the UnrealizeCursor() routine, but
if the device is NULL as called from FreeCursor(), the corresponding
x_cursor for the xwl_seat is left untouched.
This might cause a segfault when trying to access the unrealized
cursor's devPrivates in xwl_seat_set_cursor().
A possible occurrence of this is the client changing the cursor, the
Xserver calling FreeCursor() which does UnrealizeCursor() and then
the Wayland server sending a pointer enter event, which invokes
xwl_seat_set_cursor() while the seat's x_cursor has just been
unrealized.
To avoid this, walk through all the xwl_seats and clear up all x_cursor
matching the cursor being unrealized.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
wl_display_flush() can fail with EAGAIN and Xwayland would make this a
fatal error.
When this happens, it means that Xwayland has flooded the Wayland file
descriptor, either because the Wayland compositor cannot cope or more
likely because of a deadlock situation where the Wayland compositor is
blocking, waiting for an X reply while Xwayland tries to write data to
the Wayland file descriptor.
The general consensus to avoid the deadlock is for the Wayland
compositor to never issue blocking X11 roundtrips, but in practice
blocking rountrips can occur in various places, including Xlib calls
themselves so this is not always achievable without major surgery in the
Wayland compositor/Window manager.
What this patch does is to avoid dispatching to the Wayland file
descriptor until it becomes available for writing again, while at the
same time continue processing X11 requests to release the deadlock.
This is not perfect, as there is still the possibility of another X
client hammering the connection and we'll still fail writing to the
Wayland connection eventually, but this improves things enough to avoid
a 100% repeatable crash with vlc and gtkperf.
Also, it is worth considering that window managers and Wayland
compositors such as mutter already have a higher priority than other
regular X clients thanks to XSyncSetPriority(), mitigating the risk.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1278159
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=763400
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Keeping the shm fd open beyond pixmap creation means we can easily
reach the open file descriptor limit if an X client asks us to create
that many pixmaps. Instead, let's get the wl_buffer immediatly so that
we can destroy the shm pool and close the fd before being asked to
create more.
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Since xwayland's initial commit we have had a check to not process
wayland modifier events while one of our surfaces has keyboard focus
since the normal xkb event processing keeps our internal modifier
state up to date and if we use the modifiers we get from the
compositor we mess up that state.
This was slightly changed in commit
10e9116b3f to allow the xkb group to be
set from the wayland event while we have focus in case the compositor
triggers a group switch.
There's a better solution to the original problem though. Processing
queued events before overriding the xkb state with the compositor's
allows those events to be sent properly modified to X clients while
any further events will be modified with the wayland modifiers as
intended.
This allows us to fully take in the wayland modifiers, including
depressed ones, which fixes an issue where we wouldn't be aware of
already pressed modifiers on enter.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Emitting a LeaveNotify event every time the pointer leaves an X11 window
may confuse focus follow mouse mode in window managers such as
mutter/gnome-shell.
Keep the previously found X window and compare against the new one, and
if they match then it means the pointer has left an Xwayland window for
a native Wayland surface, only in this case fake the crossing to the
root window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Without this a change in eg Xext/ wouldn't relink Xwayland, making you
wonder why your changes didn't have any effect.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
At shutdown, the Xserver will free all its resources which includes the
RRCrtc and RROutput created.
Xwayland would do the same in its xwl_output_destroy() called from
xwl_close_screen(), leading to a double free of existing RRCrtc
RROutput:
Invalid read of size 4
at 0x4CDA10: RRCrtcDestroy (rrcrtc.c:689)
by 0x426E75: xwl_output_destroy (xwayland-output.c:301)
by 0x424144: xwl_close_screen (xwayland.c:117)
by 0x460E17: CursorCloseScreen (cursor.c:187)
by 0x4EB5A3: AnimCurCloseScreen (animcur.c:106)
by 0x4EF431: present_close_screen (present_screen.c:64)
by 0x556D40: dix_main (main.c:354)
by 0x6F0D290: (below main) (in /usr/lib/libc-2.24.so)
Address 0xbb1fc30 is 0 bytes inside a block of size 728 free'd
at 0x4C2BDB0: free (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4CCE5F: RRCrtcDestroyResource (rrcrtc.c:719)
by 0x577541: doFreeResource (resource.c:895)
by 0x5787B5: FreeClientResources (resource.c:1161)
by 0x578862: FreeAllResources (resource.c:1176)
by 0x556C54: dix_main (main.c:323)
by 0x6F0D290: (below main) (in /usr/lib/libc-2.24.so)
Block was alloc'd at
at 0x4C2CA6A: calloc (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4CC6DB: RRCrtcCreate (rrcrtc.c:76)
by 0x426D1C: xwl_output_create (xwayland-output.c:264)
by 0x4232EC: registry_global (xwayland.c:431)
by 0x76CB1C7: ffi_call_unix64 (in /usr/lib/libffi.so.6.0.4)
by 0x76CAC29: ffi_call (in /usr/lib/libffi.so.6.0.4)
by 0x556CEFD: wl_closure_invoke (connection.c:935)
by 0x5569CBF: dispatch_event.isra.4 (wayland-client.c:1310)
by 0x556AF13: dispatch_queue (wayland-client.c:1456)
by 0x556AF13: wl_display_dispatch_queue_pending
(wayland-client.c:1698)
by 0x556B33A: wl_display_roundtrip_queue (wayland-client.c:1121)
by 0x42371C: xwl_screen_init (xwayland.c:631)
by 0x552F60: AddScreen (dispatch.c:3864)
And:
Invalid read of size 4
at 0x522890: RROutputDestroy (rroutput.c:348)
by 0x42684E: xwl_output_destroy (xwayland-output.c:302)
by 0x423CF4: xwl_close_screen (xwayland.c:118)
by 0x4B6377: CursorCloseScreen (cursor.c:187)
by 0x539503: AnimCurCloseScreen (animcur.c:106)
by 0x53D081: present_close_screen (present_screen.c:64)
by 0x43DBF0: dix_main (main.c:354)
by 0x7068730: (below main) (libc-start.c:289)
Address 0xc403190 is 0 bytes inside a block of size 154 free'd
at 0x4C2CD5A: free (vg_replace_malloc.c:530)
by 0x521DF3: RROutputDestroyResource (rroutput.c:389)
by 0x45DA61: doFreeResource (resource.c:895)
by 0x45ECFD: FreeClientResources (resource.c:1161)
by 0x45EDC2: FreeAllResources (resource.c:1176)
by 0x43DB04: dix_main (main.c:323)
by 0x7068730: (below main) (libc-start.c:289)
Block was alloc'd at
at 0x4C2BBAD: malloc (vg_replace_malloc.c:299)
by 0x52206B: RROutputCreate (rroutput.c:84)
by 0x426763: xwl_output_create (xwayland-output.c:270)
by 0x422EDC: registry_global (xwayland.c:432)
by 0x740FC57: ffi_call_unix64 (unix64.S:76)
by 0x740F6B9: ffi_call (ffi64.c:525)
by 0x5495A9D: wl_closure_invoke (connection.c:949)
by 0x549283F: dispatch_event.isra.4 (wayland-client.c:1274)
by 0x5493A13: dispatch_queue (wayland-client.c:1420)
by 0x5493A13: wl_display_dispatch_queue_pending
(wayland-client.c:1662)
by 0x5493D2E: wl_display_roundtrip_queue (wayland-client.c:1085)
by 0x4232EC: xwl_screen_init (xwayland.c:632)
by 0x439F50: AddScreen (dispatch.c:3864)
Split xwl_output_destroy() into xwl_output_destroy() which frees the
wl_output and the xwl_output structure, and xwl_output_remove() which
does the RRCrtcDestroy() and RROutputDestroy() and call the latter only
when an output is effectively removed.
An additional benefit, on top of avoiding a double free, is to avoid
updating the screen size at shutdown.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The frame callback set up via wl_surface_frame() needs to be freed with
wl_callback_destroy() or we'll leak memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97065
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Otherwise if the geometry changes but the mode doesn't we end up with
the previous geometry from RR's point of view.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=768710
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
This partially reverts commit c1565f3.
When the pointer moves from an X11 window to a Wayland native window,
no LeaveNotify event is emitted which can lead to various unexpected
behaviors like tooltips remaining visible after the pointer has left the
window.
Yet the pointer_handle_leave() is called and so is the DIX CheckMotion()
but since the pointer enters a Wayland native window with no other
Xwayland window matching, DoEnterLeaveEvents() does not get invoked and
therefore no LeaveNotify event is sent to the X11 client at the time the
pointer leaves the window for a Wayland native surface.
Restore the XYToWindow() handler in xwayland-input that was previously
removed with commit c1565f3 and use that handler to pretend that the
pointer entered the root window in this case so that the LeaveNotify
event is emitted.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96437
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The call to 'InitButtonClassDeviceStruct' which initializes the pointer
buttons only results in the first three buttons being created due to a
hardcoded '3'. In order to expose all the buttons defined in the
btn_labels array, we subtitute 'NBUTTONS' in its place.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Substitute a few errant tab characters with eight spaces to conform to the
prevailing style.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On cursor unrealize, the associated pixmap is destroyed, make sure we
clear the pointer from the private resource and check for the value
being non-null when setting or destroying the cursor.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96246
This partially revert commit 984be78
The rountrip in Xwayland's InitInput() is unlikely the culprit for the
crash reported in bug 95337, even though it's triggered from
InitInput().
Startup goes like this:
xwl_screen_init()
xwl_output_create()
wl_display_roundtrip()
InitInput()
wl_display_roundtrip()
ConnectionInfo initialized
What happens in bug 95337 is that some output data is already available
when we reach InitInput()'s wl_display_roundtrip() and therefore we end
up trying to update the ConnectionInfo's data from RR routines before
ConnectionInfo is actually initialized.
Removing the wl_display_roundtrip() from InitInput() will not fix the
issue (although it would make it less lileky to happen), because
xwl_screen_init() also does a wl_display_roundtrip() after creating the
output, so the race that led to bug 95337 remains.
However, re-setting the xwl_screen->expecting_event to 0 again in
InitInput() still doesn't seem right. so this part is not restored
(thus a partial revert).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95337
Can't find any reference of pointer_limbo_window in the code, let's
remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Current Mesa Git master checks that the EGL display actually supports
the API passed to eglBindAPI, which can only succeed after
eglInitialize.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Read and dispatch pending Wayland events to make sure we do not miss a
possible reply from the compositor prior to discard a key repeat.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Key repeat is handled by the X server, but input events need to be
processed and forwarded by the Wayland compositor first.
Make sure the Wayland compositor is actually processing events, to
avoid repeating keys in Xwayland while the Wayland compositor cannot
deal with input events for whatever reason, thus not dispatching key
release events, leading to repeated keys while the user has already
released the key.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=762618
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This creates a function that invalidates the current sprite and forces
a sprite image reload the next time the sprite is checked, moving that
logic out of the xwayland sources and allowing the miPointerRec
structure to be removed from the server API.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If data is received during XWayland startup, it will be read early in
InitInput() before the connection data is initialized, causing a crash.
Remove the wayland rountrips from InitInput() as this is done again in
xwl_screen_init() where it seems more appropriate.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95337
Reviewed-by: Adam Jackson <ajax@redhat.com>
If posix_fallocate or ftruncate is interrupted by signal while working,
we return -1 as fd and the allocation process returns BadAlloc error.
That causes xwayland clients to abort with 'BadAlloc (insufficient
resources for operation)' even when there's a lot of resources
available.
Fix it by trying again when we get EINTR.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
XvWindowMask is defined as 0x00020000 and cannot fit in the XvAdaptor
type which is defined as an unsigned char, thus causing a compiler
warning:
xwayland-glamor-xv.c: In function ‘xwl_glamor_xv_add_adaptors’:
xwayland-glamor-xv.c:339:16: warning: large integer implicitly
truncated to unsigned type [-Woverflow]
This XvWindowMask value is actually not used for XvAdaptor itself but by
the server in its xf86xv implementation, so we don't even need that mask
in our xwayland-glamor-xv implementation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Some games (namely openttd) will raise an XError and fail with a
BadValue if their request to XF86VidModeSetViewPort fails.
Support only the default zoom and viewport, fail for everything else.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some applications (e.g. using lwjgl) try to parse the output of the
xrandr command and get confused with the mode name returned by Xwayland,
because it contains "@[frequency]" (e.g. "1024x640@60.0Hz").
Remove the @[frequency] part of the mode name to match what is found in
usual mode names on regular X servers to please those applications.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94589
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We had HAVE_POSIX_FALLOCATE checks, but no such macros were ever
defined anywhere. This commit makes it so that this macro is defined if
the posix_fallocate is detected during configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
On output removal, the CRTC that was added in xwl_output_create()
is not removed in xwl_output_destroy() and would cause a segmentation
fault later on in ProcRRGetMonitors():
(EE) Segmentation fault at address 0x100000001
(EE)
(EE) 10: ? (?+0x29) [0x29]
(EE) 9: /usr/bin/Xwayland (_start+0x29) [0x423299]
(EE) 8: /lib64/libc.so.6 (__libc_start_main+0xf0) [0x7fdd80e7f580]
(EE) 7: /usr/bin/Xwayland (dix_main+0x3b3) [0x544ef3]
(EE) 6: /usr/bin/Xwayland (Dispatch+0x31e) [0x54109e]
(EE) 5: /usr/bin/Xwayland (ProcRRGetMonitors+0x9b) [0x4ca18b]
(EE) 4: /usr/bin/Xwayland (RRMonitorMakeList+0x269) [0x4c9ba9]
(EE) 3: /usr/bin/Xwayland (RRMonitorSetFromServer+0x118) [0x4c9198]
(EE) 2: /usr/bin/Xwayland (MakeAtom+0x30) [0x530710]
(EE) 1: /lib64/libc.so.6 (__restore_rt+0x0) [0x7fdd80e93b1f]
(EE) 0: /usr/bin/Xwayland (OsSigHandler+0x29) [0x5792d9]
Remove the output CRTC in xwl_output_destroy() to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Older games (mostly those based on SDL 1.x) rely on the XVidMode
extension and would refuse to run without.
Add a simple, limited and read-only xvidmode support that reports the
current mode used so that games that rely on xvidmode extension can run
on XWayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Prefix the temporary file names used for allocating pixmaps with
"xwayland-" instead of "weston-". This makes it less confusing while
looking at the file names of the currently open fds of the Xwayland
process.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The last cursor frame we commited before the pointer left one of our
surfaces might not have been shown. In that case we'll have a cursor
surface frame callback pending which we need to clear so that we can
continue submitting new cursor frames.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This adds support to Xwayland to try and use OpenGL core
profile for glamor first.
v1.1: use version defines.
v2: let glamor work out core profile itself.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Replace the block/wakeup handler with a NotifyFd callback instead.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When unplugging an output, it's still listed in xrandr and the size
of the root window still includes the removed output.
The RR output should be destroyed when its Wayland counterpart is
destroyed and the screen dimensions must be updated in both the done
and the destroy handlers.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92914
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
In Wayland, a client (in this case XWayland) should set the cursor
surface when it receives pointer focus. Not doing this will leave the
curser at whatever it was previously.
When running on XWayland, the X server will not be the entity that
controls what actual pointer cursor is displayed, and it wont be notified
about the pointer cursor changes done by the Wayland compositor. This
causes X11 clients running via XWayland to end up with incorrect pointer
cursors because the X server believes that, if the cursor was previously
set to the cursor C, if we receive Wayland pointer focus over window W
which also has the pointer cursor C, we do not need to update it. This
will cause us to end up with the wrong cursor if cursor C was not the
same one that was already set by the Wayland compositor.
This patch works around this by, when receiving pointer focus, getting
the private mipointer struct changing the "current sprite" pointer to
an invalid cursor in order to trigger the update path next time a cursor
is displayed by dix.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Otherwise the server may try to draw onto the root window when closing
down, but when running rootless the root window has no storage thus
causing a memory corruption.
Thanks to Adam Jackson <ajax@redhat.com> for helping tracking this down!
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93045
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Marek Chalupa <mchqwerty@gmail.com>
check return values of RR.*Create calls
v2. do not bail out if we don't have any output
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
don't leak memory when realizing window fails
v2. take care of all memory allocation and return values,
not just one leak
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
wl_keyboard::enter is the equivalent of FocusIn + KeymapNotify: it
notifies us that the surface/window has now received the focus, and
provides us a set of keys which are currently down.
We should use these keys to update the current state, but not to send
any events to clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a pixmap isn't getting exported as a dmabuf, then we don't need to
make an EGLImage/GBM bo for it. This should reduce normal pixmap
allocation overhead, and also lets the driver choose non-scanout
formats which may be much higher performance.
On Raspberry Pi, where scanout isn't usable as a texture source, this
improves x11perf -copypixwin100 from about 4300/sec to 5780/sec under
xcompmgr -a, because we no longer need to upload our x11perf window to
a tiled temporary in order to render it to the screen.
v2: Just use pixmap->usage_hint instead of a new field. Drop the
changes that started storing gbm_bos in the pixmap priv due to
lifetime issues.
v3: Fix a missing gbm_bo_destroy() on the pixmap-from-fd success path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
One less layering violation (EGL should call glamor, if anything, not
the other way around).
v2: Move glamor.c's DestroyPixmap wrapping up above the
glamor_egl_screen_init() call, since glamor.c's DestroyPixmap
needs to be the bottom of the stack (it calls fb directly and
doesn't wrap). Caught by Michel.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When we have a single output, just set it to the physical size of that
output. Otherwise try to approximate it calculating a mean m.m. per
dot. Last fallback is to default to 96 DPI.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When a new output is hot-plugged we need to not only update our internal
screen dimensions, but also the dix screen dimensions, screenInfo
dimensions and the root window dimensions.
https://bugs.freedesktop.org/show_bug.cgi?id=92273
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
While we have keyboard focus, the server's xkb code is already locking
and latching modifiers appropriately while processing keyboard
events.
Since there is no guaranteed order between wl_keyboard key and
modifiers events, if we got the modifiers event with a locked or
latched modifier and then process the key press event for that
modifier we would wrongly unlock/unlatch. To prevent this, we ignore
locked and latched modifiers while any of our surfaces has keyboard
focus.
But we always need to set the xkb group index since this might be
triggered programatically by the wayland compositor at any time.
Reviewed-by: Daniel Stone <daniels@collabora.com>
output.done event can be sent even on some property change, not only
when announcing the output. Therefore we must check if we already have it
otherwise we may corrupt the list by adding it multiple times.
This fixes bug when xwayland looped indefinitely in output.done handler
and that can be reproduced following these steps (under X without
multi-monitor setup):
1) run weston --output-count=2
2) run xterm, move it so that half is on one output
and half on the other
3) close second output, try run weston-terminal
weston sends updated outputs which trigger this bug.
v2. factor out common code into function
move expecting_events into right branch
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
This makes Xwayland correctly handle a monitor getting unplugged.
[Marek]: use xorg_list_for_each_entry_safe
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
snprintf does not allocate memory, so we can never get an out-of-memory
error.
(Also, the error handler would free xwl_output after it was already
registered as an event listener.)
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Commit 2172714c changed behavior of capability handling, but it only
solved part of the problem. If Xwayland is launched without a capability
(e.g. no pointer device is connected when Xwayland was spinned up), and
later that capability comes, the device added will not be automatically
initialized. This patch initializes the device when the capability is
reported for the first time, thus avoiding the problem.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=81819
Signed-off-by: Boyan Ding <stu_dby@126.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is (eventually) called during
InitializeSprite() → *pScreen->SetCursorPosition → miPointerSetCursorPosition
when a device is set to floating. We don't do anything special outselves, but
we need to pass on to the next layer to make sure the device is initialized
properly. Otherwise, pScreen stays NULL and eventually crashes the server when
we try to clean up behind us.
Test case: grab a device → floats it, ungrab again → crash
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When grabbed, the slave device is floating, i.e. the master device is NULL.
CheckMotion() isn't happy with NULL. Make sure we pass the right device in,
either the master device when the device is attached, or the device itself
when it is floating.
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
A DeviceIntPtr with touch valuators is also created in order to deliver
the translated touch events. The lifetime of xwl_touch structs is tied
to the wayland ones, finishing in either wl_touch.up() or wl_touch.cancel()
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This struct holds information about each individual, ongoing touchpoint.
A list of these is held by the xwl_seat.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This was built as a hack for simple Wayland compositors like Weston
which were lazy and didn't want to configure windows server-side when
moved.
Since comboboxes and menus are separate toplevel O-R windows, this hack
breaks input as it needs to be traced normally, not simply sent to the
focused window.
X11 toolkits really do need their windows to be configured correctly
for their O-R windows comboboxes or menus other things, so let's fix
the lazy compositors and remove this.
I have tested this patch with both Weston and Mutter and neither of
them require any changes, and it fixes comboboxes and menus.
If somebody then wants to revert 73698d4, that's fine by me, so we
reduce the amount of API that DDXen have.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>