If the driver isn't compatible to the server, all bets are off anyway wrt
the contents of the fields that we're validating, which can lead to bogus
error messages.
This was an attempt to avoid scratch gc creation and validation for paintwin
because that was expensive. This is not the case in current servers, and the
danger of failure to implement it correctly (as seen in all previous
implementations) is high enough to justify removing it. No performance
difference detected with x11perf -create -move -resize -circulate on Xvfb.
Leave the screen hooks for PaintWindow* in for now to avoid ABI change.
Improve exaShmPutImage performance and reuse its core in exaPutImage as it
seems faster than the previous code when the driver doesn't provide an
UploadToScreen hook.
Make sure all damage records are notified of the damage incurred by actual
ShmPutImage calls.
Remove superfluous manual damage tracking for actual PutImage calls.
Exclude bits that will be overwritten from migration.
Use exaGlyphs even when Composite can't be accelerated, to avoid PolyFillRect
roundtrip via offscreen memory.
Initialize mask pixmap in exaGlyphs in FB in addition to system if the driver
provides Composite hooks to avoid migration overhead.
Remove manual damage tracking where superfluous.
Initialize system and FB copy in exaFillRegionSolid and adapt
exaGetPixmapFirstPixel to the new migration infrastructure.
This should mostly eliminate migration overhead for these, whether they are
used for acceleration or fallbacks.
As we can't actually accelerate anything interesting here, just migrate out
once and call fbSolidBoxClipped instead of taking a round trip via offscreen
memory with exaSolidBoxClipped.
Reuse pending damage region for extents and to prevent any actual migration of
pixmap contents when we're overwriting the whole pending damage region.
Remove superfluous manual damage tracking.
Only migrate once in exaTrapezoids/Triangles instead of every time in
exaRasterizeTrapezoid/AddTriangles. Adapt manual damage tracking to new
infrastructure.
Also move definition of NeedsComponent() closer to where it's used.
We finally want to catch all cases where the pixmap pointer is dereferenced
outside of exaPrepare/FinishAccess.
Also fix a couple of such cases exposed by this change.
The initiator of migration can pass in a region that defines the relevant area
of each source pixmap or the irrelevant area of the destination pixmap. By
default, the pending damage region is assumed relevant for the destination
pixmap, and everything for source pixmaps.
Thanks to Jarno Manninen for reassuring me that my own ideas for this were
feasible and for providing additional ideas.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
Composite's automatic redirection is a more general mechanism than the
ad-hoc BS machinery, so it's much prettier to implement the one in terms
of the other. Composite now wraps ChangeWindowAttributes and activates
automatic redirection for windows with backing store requested. The old
backing store infrastructure is completely gutted: ABI-visible structures
retain the function pointers, but they never get called, and all the
open-coded conditionals throughout the DIX layer to implement BS are gone.
Note that this is still not a strictly complete implementation of backing
store, since Composite will throw the bits away on unmap and therefore
WhenMapped and Always hints are equivalent.
The fb pointer would be left uninitialized when exaPixmapIsOffscreen
returned false. When it returned true and the pixmap was damaged,
fb would be initialized from the pixmap's devPrivate.ptr before the
exaDoMigration and exaPrepareAccess calls, at which point
devPrivate.ptr would still be pointing at offscreen memory.
miTrapezoids creates an alpha pixmap and initializes the contents
using PolyFillRect, which causes the pixmap to be moved in for
acceleration. The subsequent call to RasterizeTrapezoid won't be
accelerated by EXA, which causing the pixmap to be moved back out
again.
By wrapping Trapezoids and using ExaCheckPolyFillRect instead of
PolyFillRect to initialize the pixmap, we avoid this roundtrip.
This avoids some inefficiency in creating a temporary Picture
for every glyph at rendering time. My measurements with an i965
showed the previous patch causing a 10-15% slowdown for NoAccel
and XAA cases, (while providing an 18% speedup for EXA).
With this change, the NoAccel and XAA performance regression is
eliminated, and the overall EXA speedup, (before any of the
glyphs-as-pixmaps work), is now 32%.
Instead of system-memory data which prevents accelerated
compositing of glyphs, (at least without forcing an upload
of the glyph data before compositing).
If the pixel in framebuffer memory isn't modified since we uploaded it, we
can just read from the system memory copy, wihch avoids both a readback and
an accelerator stall.
In principle this function is still wrong, and all the framebuffer pixel
access should be going through (w)fb so we can get pixel layout corrections.
This is mainly to avoid wasting effort for XSync(), but just reading a single
pixel directly is probably faster than DownloadFromScreen anyway. Though in
light of the latter, even larger thresholds might be useful.
Also move the swappedOut check before the migration checks because migration
can't actually occur when swapped out.
Only migrate when appropriate. In particular, don't migrate to offscreen in the
no-fallback case as copying from system memory should usually be as fast if not
faster than DownloadFromScreen, in particular if the bits need to be uploaded
to offscreen first.
* Defer to simpler hooks in more cases (inspired by XAA behaviour).
* Move damage tracking from lower to higher level functions.
* Always migrate for fallbacks.
* Convert rects to region and use it for damage tracking.
* When possible, defer to exaFillRegion{Solid,Tiled} using converted region.
* Always migrate for fallbacks.
* Move damage tracking out of ExaCheckPolyFillRect.
* Support planemasks, different ALUs and arbitrary tile origin.
* Leave damage tracking and non-trivial fallbacks to callers.
* Always migrate for fallbacks.
This is in preparation for using these from more other functions.
Additionally, protect libcw setup behind checks for Render, to avoid
segfaulting if Render isn't available (xnest).
The previous setup was an ABI-preserving dance, which is better nuked now.
Now, anything that needs libcw must explicitly initialize it, and
miDisableCompositeWrapper (previously only called by EXA and presumably binary
drivers) is gone.
This is a new behavior for version 2.1 of EXA, and only takes effect if the
driver has requested that. Otherwise, the previous behavior remains the same.
This has been what has been used the most successfully post-damagetrack.
The current thinking is that:
1) We should be able to accelerate basically everything. So we don't need to
try to migrate trees of pixmaps permanently out of framebuffer to speed
CPU drawing up.
2) Migration is cheaper in the thrashing case, so we don't want to go to a lot
of effort to try (and fail badly) to find a working set.
Mostly due to exaDrawableDirty() now calculating the backing pixmap coordinates
internally, for cases where they aren't trivially known. There's a new
exaPixmapDirty() function for the other cases.
Also, rename to exaTryMagicTwoPassCompositeHelper() as it is now called for
non-component-alpha masks also, and add function description from
http://anholt.livejournal.com/32058.html.
Get rid of almost all uses of these definitions. They're still defined for
delinquent out-of-tree drivers, and also for the Mesa build. As well as
for miinitext.c. But largely gone.
which still happen somewhat frequently and were cluttering up my
fallback debugging output. x11perf says it's a major performance win in
those cases (though probably irrelevant), and it passes Xlib9.
through the whole CompositePicture stack and doing things like
computing damage over again. This is a sizeable win for text drawing
with a compmgr. Also avoid calling down into the server for dealing
with the scratch pixmap when we are able to do UploadToScreen
successfully and never need it.
down into an OutReverse and an Add. Turn off the fallback to software
glyphs when component alpha, now that we expect all (new) drivers to be
able to support it. Also, make Xephyr fall back in the CA Over case to
exercise this code. This speeds up my rgb24text and ls -lR in
gnome-terminal by a factor of 5.
and if they all have a maskFormat matching the format of the actual
glyphs If so, we can avoid the temporary pixmap for accumulating
glyphs, which reduces the number of operations done, and makes it
easier on the migration system. This fixes some significant performance
issues, particularly with subpixel antialiasing. Note that it does
increase the amount of damage computation which is done, so is not
always a win with a compositing manager running.
one behaves somewhat between Greedy and Always. It moves in if we can
accelerate, unless the destination is clean and shouldn't be kept in
framebuffer according to the score, in which case we migrate out (and
force-migrate anything where migration is free). This should help fix
lack of acceleration for drivers without UTS since removing
exaAsyncPixmapGCOps, and has removed one performance trap with Radeon
I'd noticed. It is the new default.
implementation to avoid unprepared access to the tile. Also, relocate
the fbGetDrawable to avoid using a stale dest pointer after
exaSolidBoxClipped() may have migrated it. Revealed by xtest.
devPrivate.ptr when pointing at offscreen memory, outside of
exaPrepare/FinishAccess(). This was used with fakexa to find (by NULL
dereference) many instances of un-Prepared CPU access to the
framebuffer:
- GC tiles used in several ops when fillStyle == FillTiled were never
Prepared.
- Migration could lead to un-Prepared access to mask data in render's
Trapezoids and Triangles
- PutImage's UploadToScreen failure fallback failed to Prepare.
plug in the accelerated one, even if the destination pixmap is
currently offscreen. This was a leftover from when kaa originally got
accelerated offscreen pixmap support, and its only concievable use was
to avoid a little overhead on ops to in-system pixmaps that weren't
going to get migrated. At this point, we probably care more about just
getting everything accelerated that we easily can, which should happen
with the new migration support.
FB_ALLONES, bitsPerPixel >= 8, GXcopy cases. With the radeon driver on
my machine, this gives about 10% speedup in PutImage
10x10 and 500x500, and 40% speedup for 10x10 ShmPutImage, up to 65%
improvement in 500x500 ShmPutImage. Also fixes a crasher in GetImage
that slipped in at the last minute.
ZPixmap, planeMask ~= FB_ALLONES, bitsPerPixel >= 8 case. I'm pretty
convinced that this is the only case that we care about at all. Tested
with xwd -root and xwd on a gnome-terminal, in a composited environment
or not.
pixmap, and damage is tracked so that a later exaMoveInPixmap won't
result in an upload if no upload is necessary. This will likely improve
the performance of the "Always" migration scheme significantly, and is
a step in the path to more exact damage tracking between framebuffer
and system memory.
desired location always (unless they don't fit in FB, in which case
they all get moved out for software rendering). The default remains as
before, but can be controlled by the MigrationHeuristic xorg.conf
option (which is intentionally not documented, as it may be
short-lived). This is part of the exa-damagetrack work, which appears
stable in testing with fakexa, unlike the work as a whole.
manual conversion to allow for different migration schemes to be
implemented reasonably, but does include some minor improvements such
as accounting for pinned pixmaps not being acceleratable, and for our
current GetImage and GetSpans not being accelerated.
corresponding pieces of exa-driver.txt, which were becoming stale.
Hopefully the documentation will stay much more up-to-date this way.
Many thanks to jbarnes for writing exa-driver.txt which was used a lot
in writing this documentation.
when extending the driver interface. The card and accel structures are
merged into the ExaDriverRec, which is to be allocated using
exaDriverAlloc(). The driver structure also grows exa_major and
exa_minor, which drivers fill in and have checked by EXA
(double-checking that the driver really did check that the EXA version
was correct). Removes exaInitCard(), which is replaced by the driver
filling in the rec by hand, and the exaGetVersion() and related
EXA_*VERSION which are replaced by always using the XFree86 loadable
module versioning.
dependencies. It was nearly abstract enough already to be used by
multiple DDXes. This will be useful for EXA development through
providing a fake acceleration implementation within Xephyr, so that
testing can be done on new EXA code without worrying about buggy
drivers.
pixmaps's contents are undefined, so we won't need to upload the
undefined contents in MoveIn. Use the ExaCheck* for async ops as well,
so that dirty is always tracked. While the performance impact for my ls
-lR test was not significant (though the avoiding-upload path was being
hit), it's likely to be important for the upcoming Get/PutImage
acceleration from ajax.
causing our search loop for evictable blocks to possibly skip a good
candiate, and another was the allocator would occasionally use
area->offset as if it was the base of the pixmap, while for a pixmap
that is not in available state, it is not. This caused some funny
miscalculation leading to overlapping pixmaps and accesses beyond the
end of the framebuffer. To make things cleared, I renamed save_offset
to base_offset, made sure it's the one used everywhere in the
allocator, and only align "offset" for the client at the end of
exaOffscreenAlloc().
don't expect drivers to be able to accelerate without exa assistance).
Instead, drop back to plain old miGlyphs for a 62.5% +/- 1.5% reduction
in runtime of my ls -lR test (n=5) with component alpha. While a
reasonable approach would seem to be making a better test to see
whether the entire path would be accelerated and force migration
appropriately, my attempt at this made the situation much worse.
accelerate repeat NPOT thus triggering software fallback (this is the
case with gnome desktop for example). This adds a simple optimisation
to exa that removes "repeat" when it's obviously useless, that is, the
single picture instance covers the entire rectangle beeing used
so resulted in a solid black glyph if the font rendering actually
resulted in a fallback (subpixel AA, for example) and the temporary got
migrated after 10 or so glyphs.