Make lots of string pointers 'const char' so that we can use constant
strings with them without eliciting warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This avoids compiler warnings when initializing with string constants.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of only relying on the Range section, we can do better on
HDMI to find out what is the max dot clock the monitor supports. The
HDMI CEA vendor block adds a TMDS max freq we can use.
This makes X not prune 4k resolutions on HDMI.
v2: Replace X_INFO by X_PROBED in the message that prints the max
TMDS frequency (Chris Wilson)
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
The HDMI CEA vendor specific block has some interesting information,
such as the maximum TMDS dot clock.
v2: Don't parse CEA blocks with invalid offsets, remove spurious
brackets (Chris Wilson)
v3: Fix the looping through the CEA data blocks, it had a typo using the
wrong variable coming from the code it was ported from.
Replace x << 16 + y << 8 + z by x << 16 | y << 8 | z
(Chris Wilson)
v4: Remove the stray ';' at the end of "if (*end == 0)".
(Dominik Behr on IRC)
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
On UEFI machines you'd prefer fbdev to grab efifb instead of vesa trying
to initialize and failing in a way we can't unwind from. On BIOS
machines this is harmless: either there is an fbdev driver and it'll
probably be more capable, or there's not and vesa will kick in anyway.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
... unless you explicitly disabled it with -bs on the command line, or
with the corresponding thing in xorg.conf.
v2: Drop a bogus hunk from compChangeWindowAttributes [vsyrjala]
v3: s/TRUE/WhenMapped/ [jcristau]
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Since we're using RedirectAutomatic to do this, we don't actually
preserve contents when unmapped.
v2: Don't say WhenMapped if Composite didn't initialize [vsyrjala]
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Would only work on ScreenRec 0, which means it's broken.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
With outputless GPUs showing up we crash here if there are not outputs
try and recover with a bit of grace.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since all the inb/outb/etc. use in the X server itself (except for
xf86SlowBcopy) has been replaced by calls to libpciaccess, we no
longer need to pass inline assembly files to replace the gcc inline
assembly from hw/xfree86/common/compiler.h when building Xorg itself.
The .il files are still generated and installed in the SDK for the
benefit of drivers who may use them.
Binary diff of before and after showed that xf86SlowBcopy was the
only function changed across the Xorg binary and all modules built
in the Xserver build, it just calls the outb() function now instead
of having the outb instructions inlined, making it a slightly slower
bcopy.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When building on Solaris with _XOPEN_SOURCE set to a recent XPG release,
<stdlib.h> and other core headers start including <sys/regset.h>, which
has a bunch of unfortunately named macros such as "CS", "ES", etc. for
x86 & x64 registers which clash with existing variable & struct member
names in Xorg - so #undef these so they don't interfere with our use.
(Yes, have filed a bug against the system headers for exposing these,
but this solves the problem for building on existing releases.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This gets the server to link with xshmfence again, and also ensures
that the miSyncShm code is linked into the server with the reference
from sdksyms.
Signed-off-by: Keith Packard <keithp@keithp.com>
A call to Xrandr SetScreenConfig (for randr 1.1) causes the Xserver to
crash when xf86SetViewport() which does not check if the hardware is
accessible.
Wrap accesses to xf86SetViewport() with if (vtSema) { ... } to avoid that.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When enabling/disabling input handlers in xf86VTSwitch() we treat Input-
and GeneralHandlers equally. The result is that after a VT switch the
masks for EnabledDevices and AllSockets are equal and the distiction
between both types is lost.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
EDID sometimes lies about screen sizes. Since the screen size is used
by clients to determine the DPI a wrong ration will lead to terrible
looking fonts.
Add a sanity check for the h/v ratio cutting off at 2.4. This would
still accept the cinemascope aspect ratio as valid.
Also add message suggesting to add a quirk table entry.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DMPS calls dixSaveScreens() when turned off but not when turned
on. In most cases this is irrelevant as DPMS is done when a
key is hit in which case dixSaveScreens() will be called to
unblank anyhow. This isn't the case if we use xset (or the
DPMS extension directly) to unblank.
Check screenIsSaved to make sure the state needs to be changed
before calling dixSaveScreens().
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
After fc3ab84d the pVideo field in DevToConfig[i] is no longer
initialized, so it's always NULL. This causes the duplicate finding
algorithm in the beginning of the function to not work anymore as it
is based on this field.
The symptom of this bug is that X -configure reports
Number of created screens does not match number of detected devices.
Configuration failed.
Server terminated with error (2). Closing log file.
rather than producing a working config file.
This patch fixes that bug by initializing the field before calling
xf86PciConfigureNewDev().
Cc: tvignatti@gmail.com
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds DRM compatible fences using futexes.
Uses FD passing to get pixmaps from DRM applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Send RRResourceChangeNotify event when provider, output or crtc was created or
destroyed. I.e. when the list of resources returned by RRGetScreenResources and
RRGetProviders changes.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As of server 1.13, systems with DRM and Udev will have BUS_PLATFORM as
their primary bus type. However, drivers not implementing a
platformProbe function will still create entities of type BUS_PCI. We
need to account for this when checking for the primary entity.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Acked-by: Tormod Volden <debian.tormod@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mesa doesn't ship DRI1 drivers as of 8.0, which is about 18 months and
three releases ago. The main reason to have wanted DRI1 AIGLX was to
get a GLX compositor working, but DRI1's (lack of) memory management API
meant that the cost of a GLX compositor was breaking direct GLX apps,
which isn't a great tradeoff.
Of the DRI1 drivers Mesa has dropped, I believe only mga stands to lose
some functionality here, since it and only it has support for
NV_texture_rectangle. Since that's required for every extant GLX
compositor I know of, I conclude that anybody with a savage, say, would
probably not notice AIGLX going away, since they wouldn't be running a
GLX compositor in the first place.
In the future we'd like to use GL in the server in a more natural way,
as just another EGL client, including in the GLX implementation itself.
Since there's no EGL implemented for DRI1 drivers, this would already
doom AIGLX on DRI1 (short of entirely forking the GLX implementation,
which I'm not enthusiastic about).
v2: Remove DRI1 from AIGLX conditionals in configure.ac [anholt]
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Without the logdir, the xserver will write the content of the log file on the
terminal stating that it cannot be written and will stop.
Refer to https://bugs.freedesktop.org/show_bug.cgi?id=3889
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Still true that we should not use the lower case $(mkdir_p) version.
However, remove the 2005 comment as the MKDIR_P is widely used now.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
It is our duty to uninstall any files and/or directories that we installed
through install-data-local and install-exec-hook.
Currently the X symbolic link to Xorg remains on disk after running
make uninstall.
Note the exception for logdir which is usually shared by other modules.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The former was explicitly designed to execute additional code after the binary
has been installed. The latter can be executed in any order, hence it's
current dependency on install-binPROGRAMS as a workaround.
The CYGWIN libXorg.exe.a target is an installation target rather than
a post-installation one, so it should not be done as a hook. It does not depend
on the Xorg executable being installed.
Automake:
"These hooks are run after all other install rules of the appropriate type,
exec or data, have completed. So, for instance, it is possible to perform
post-installation modifications using an install hook".
"With the -local targets, there is no particular guarantee of execution order;
typically, they are run early, but with parallel make, there is no way
to be sure of that".
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is not a problem on UNIX platforms, but on CYGWIN it creates a broken
link to Xorg rather than a link to Xorg.exe.
From the CYGWIN log on tinderbox, we can see that the executable Xorg.exe is
installed correctly. We can see the command used to create the link:
(cd /jhbuild/install/[...]/install/bin && rm -f X && ln -s Xorg X)
Note that the "relink" makefile target correctly appends $(EXEEXT) to Xorg.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
You can only register one drawable on a given damage, so there's no
reason to require the caller to specify the drawable, the damage is
enough. The implementation would do something fairly horrible if you
_did_ pass mismatched drawable and damage, so let's avoid the problem
entirely.
v2: Simplify xf86RotateDestroy even more [anholt]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No DDX overrode this, and we never actually called through that slot
anyway.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace hardcoded SVR4 || linux || CSRG_BASED with an autoconf check and
the _POSIX_SAVED_IDS macro.
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This at least mentions AutoAddGPU and hints at when you might
want to disable it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 8f4640bdb9 fixed a bit of a
chicken-and-egg problem by detaching GPU screens when their providers
are destroyed, which happens before CloseScreen is called. However,
this created a new problem: the GPU screen tears down its RandR crtc
objects during CloseScreen and if one of them is active, it tries to
detach the scanout pixmap then. This crashes because
RRCrtcDetachScanoutPixmap tries to get the master screen's screen
pixmap, but crtc->pScreen->current_master is already NULL at that
point.
It doesn't make sense for an unbound GPU screen to still be scanning
out its former master screen's pixmap, so detach them first when the
provider is destroyed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The peculiar way we handle coordinates results in relative coordinates on
absolute devices being added to the last value, then that value is mapped to
the screen (taking the device dimensions into account). From that mapped
value we get the final coordinates, both screen and device coordinates.
To avoid uneven scaling on relative coordinates, they are pre-scaled by
screen ratio:resolution:device ratio factor before being mapped. This
ensures that a circle drawn on the device is a circle on the screen.
Previously, we used the ratio to scale x up. Synaptics already does its own
scaling based on the resolution and that is done by scaling y down by the
ratio. So we can remove the code from the driver and get approximately the
same behaviour here.
Minor ABI bump, so we can remove this from synaptics.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Emmanuel Benisty <benisty.e@gmail.com>
A constant deceleration of x simply means (delta * 1/x). We limited that to
values >= 1.0f for obvious reasons, but can also allow values from 0-1.
That means that ConstantDeceleration is actually a ConstantAcceleration, but
hey, if someone needs it...
X.Org Bug 66134 <http://bugs.freedesktop.org/show_bug.cgi?id=66134>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
* __FreeBSD_kernel_version doesn't exist anymore
* The removed check was for FreeBSD versions from before September 2000
which are no longer supported anyway
* Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66045
Signed-off-by: François Tigeot <ftigeot@wolfpond.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This reverts commit 3209b094a3. After a
long debug session by Paul Berry, it appears that this was the commit
that has been producing sporadic failures in piglit front buffer
rendering tests for the last several years.
GetBuffers may return fresh buffers with invalid contents at a couple
reasonable times:
- When first asked for a non-fake-front buffer.
- When the drawable size is changed, an Invalidate has been sent, and
obviously the app needs to redraw the whole buffer.
- After a glXSwapBuffers(), GL allows the backbuffer to be undefined,
and an Invalidate was sent to tell the GL that it should grab these
appropriate new buffers to avoid stalling.
But with the patch being reverted, GetBuffers would also return fresh
invalid buffers when the drawable serial number changed, which is
approximately "whenever, for any reason". The app is not expecting
invalid buffer contents "whenever", nor is it valid. Because the GL
usually only GetBuffers after an Invalidate is sent, and the new
buffer allocation only happened during a GetBuffers, most apps saw no
problems. But apps that do (fake-)frontbuffer rendering do frequently
ask the server for the front buffer (since we drop the fake front
allocation when we're not doing front buffer rendering), and if the
drawable serial got bumped midway through a draw, the server would
pointlessly ditch the front *and* backbuffer full of important
drawing, resulting in bad rendering.
The patch was originally to fix bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=28365
Specifically:
To reproduce, start with a large-ish display (i.e. 1680x1050 on my
laptop), use the patched glxgears from bug 28252 to add the
-override option. Then run glxgears -override -geometry 640x480
to create a 640x480 window in the top left corner, which will work
fine. Next, run xrandr -s 640x480 and watch the fireworks.
I've tested with an override-redirect glxgears, both with vblank sync
enabled and disabled, both with gnome-shell and no window manager at
all, before and after this patch. The only problem observed was that
before and after the revert, sometimes when alt-tabbing to kill my
gears after completing the test gnome-shell would get confused about
override-redirectness of the glxgears window (according to a log
message) and apparently not bother doing any further compositing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no point in turning on outputs connected to GPU screens during initial
configuration. Not only does this cause them to just display black, it also
confuses clients when these screens are attached to a master screen and RandR
reports that the outputs are already on.
Also, don't print the warning about no outputs being found on GPU screens,
since that's expected.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
I didn't think we needed this before, but after doing some more
work with reverse optimus it seems like it should be called.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
scrn->display is a property of the main screen really, and we don't
want to have the GPU screens use it for anything when picking modes
or a front buffer size.
This fixes a bug where when you plugged a display link device, it
would try and allocate a screen the same size as the current running
one (3360x1050 in this case), which was too big for the device. Avoid
doing this and just pick sizes based on whats plugged into this device.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we disconnect an output/offload slave set the changed bits,
so a later TellChanged can do something.
Then when we remove a GPU slave device, sent change notification
to the protocol screen.
This allows hot unplugged USB devices to disappear in clients.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6703a7c7cf
Author: Keith Packard <keithp@keithp.com>
Date: Tue Jan 8 20:24:32 2013 -0800
hw/xfree86: Require only one working CRTC to start the server.
changed the logic to try to set the mode on all connected outputs rather
than abort upon the first failure. The return error code was then
tweaked such that it reported success if it set a mode on any crtc.
However, this confuses the headless case where we never enable any crtcs
and also, importantly, never fail to set a crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59190
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Also-written-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes build on non-udev systems, since XSERVER_PLATFORM_BUS is only
defined in configure.ac if $CONFIG_UDEV_KMS is true.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
So when we VT switch back and attempt to flush the input devices,
we don't succeed because evdev won't return part of an event,
since we were only asking for 4 bytes, we'd only get -EINVAL back.
This could later cause events to be flushed that we shouldn't have
gotten.
This is a fix for CVE-2013-1940.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Revert 70739e817b and mostly revert
c31eac647a.
Further investigation shows the encountered race condition is between
lightdm and plymouth-splash, as implemented in the Ubuntu distribution
within the limitations of upstart's job coordination logic, and can (and
should) be fixed within those limiations. Not in xserver itself.
This leaves some of the diagnostic improvements from the recent patch
series, in case others run into a similar situation.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This path is technically executed through config/udev, but having two
messages in the form "config/udev: Adding drm device" makes it appear as if
the udev filters are wrong and it's trying to add the same device twice. In
fact, it's only one device, only added once, but a duplicate log message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We don't want to hotplug output devices while we are VT switched,
as we get races between multiple X servers on the device open, and
drm device master status. This just queues device opens until we return
from VT switch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This replaces some previous uses of direct xf86Screens[0] accesses.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This is just a simple interface to avoid accessing x86Screens[0]
directly.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This removes a large number of redundant declaration warnings.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
If other processes have had drm open previously, xserver may attempt to
open the device too early and fail, with xserver error exit "Cannot
run in framebuffer mode" or Xorg.0.log messages about "setversion 1.4
failed".
In this situation, we're receiving back -EACCES from libdrm. To address
this we need to re-set ourselves as the drm master, and keep trying to
set the interface until it works (or until we give up).
See https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/982889
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
And if we've had to delay booting due to not being able to set the
interface, fess up.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Section "Monitor"
Identifier "a21inch"
Option "PreferredMode" "1600x1200"
Option "ZoomModes" "1600x1200 1280x1024 1280x1024 640x480"
EndSection
The option's effect is to search for and mark once each named mode in
the output modes list. So the specification order is free and the zoom
modes sequence follows the order of the output modes list. All marked
modes are available via the Ctrl+Alt+Keypad-{Plus,Minus} key
combination.
See also http://bugs.freedesktop.org/show_bug.cgi?id=17954.
This option has its use for combined monitor and television setups.
It allows for easy switching between 60 Hz and 50 Hz modes even when a
monitor refuses to display the input signal.
(Includes a few minor changes suggested by Aaron for v2)
Signed-off-by: Servaas Vandenberghe <vdb@picaros.org>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Otherwise, displays driven by GPU screens remain on all the time.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
So in the cold plug server shutdown case, we reap the resources
before we call CloseScreen handlers, so the config->randr_provider
is a dangling pointer when the xf86CrtcCloseScreen handler is called,
however in the hot screen unplug case, we can't rely on automatically
reaped resources, so we need to clean up the provider in the xf86CrtcCloseScreen
case.
This patch provides a cleanup callback from the randr provider removal
into the DDX so it can cleanup properly, this then gets called by the automatic
code for cold plug, or if hot unplug it gets called explicitly.
Fixes a number of random server crashes on shutdown
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58174
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=891140
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The previous fix for the previous fix, didn't fully work,
If we don't set compat_output we end up doing derferences
of arrays with -1, leading to valgrind warnings.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Due to another bug, the modesetting/udl driver would fail to init properly
on hotplug, when it did the code didn't clean up properly, and on removing
the device the server could crash.
Found in F18 testing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
xf86Cursor.c:19:18: warning: redundant redeclaration of 'inputInfo'
[-Wredundant-decls]
In file included from xf86Cursor.c:18:0:
../../../include/inputstr.h:614:57: note: previous declaration of
'inputInfo' was here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Unused as of 5d309af2ed
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
This is necessary when the input handler deletes itself from the
list. Bug found by Maarten Lankhorst, this patch uses the list macros
instead of open-coding the fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
man xorg.conf states that the 'Device' identifier is required in the
'Screen' section, yet current xserver defaults properly and boots up
fine without it.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=20742
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of defaulting to -intel for Oaktrail, Medfield, and CDV chips,
default to -fbdev. For Poulsbo (only), attempt to use -psb if it's
installed, and fallback to fbdev otherwise. All other Intel chips
should use -intel.
This fixed an issue where -intel would load on these chips and cause a
boot failure. Newer -intel drivers avoid the boot hang, but it's still
the wrong driver to load, so why take chances.
The patch was originally created by Stefan Dirsch for OpenSUSE. We have
included it in our stable release (Ubuntu "quantal" 12.10) since
December.
ref: https://bugzilla.novell.com/show_bug.cgi?id=772279
ref: https://bugs.launchpad.net/ubuntu/+bug/1069031
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60514
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If acpid sends a string in a format that we can't parse, bail out instead of
potentially dereferencing a NULL-pointer.
X.Org Bug 73227 <http://bugs.freedesktop.org/show_bug.cgi?id=73227>
Signed-off-by: Ted Felix <ted@tedfelix.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Call find_header first, returning on failure before calling malloc.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Found by parfait 1.1 memory analyser:
Memory leak of pointer 'pAdapt' allocated with malloc((88 * num_adaptors))
at line 162 of hw/xfree86/common/xf86xvmc.c in function 'xf86XvMCScreenInit'.
'pAdapt' allocated at line 158 with malloc((88 * num_adaptors)).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Also avoids leaving invalid pointers in structures if realloc had to
move them elsewhere to make them larger.
Found by parfait 1.1 code analyzer:
Memory leak of pointer 'newCallbacks' allocated with realloc(((char*)offman->FreeBoxesUpdateCallback), (8 * (offman->NumCallbacks + 1)))
at line 328 of hw/xfree86/common/xf86fbman.c in function 'localRegisterFreeBoxCallback'.
'newCallbacks' allocated at line 320 with realloc(((char*)offman->FreeBoxesUpdateCallback), (8 * (offman->NumCallbacks + 1))).
newCallbacks leaks when newCallbacks != NULL at line 327.
Memory leak of pointer 'newPrivates' allocated with realloc(((char*)offman->devPrivates), (8 * (offman->NumCallbacks + 1)))
at line 328 of hw/xfree86/common/xf86fbman.c in function 'localRegisterFreeBoxCallback'.
'newPrivates' allocated at line 324 with realloc(((char*)offman->devPrivates), (8 * (offman->NumCallbacks + 1))).
newPrivates leaks when newCallbacks == NULL at line 327.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reported by parfait 1.1 code analyzer:
Error: Null pointer dereference (CWE 476)
Read from null pointer 'p'
at line 746 of hw/xfree86/common/xf86Option.c in function 'xf86TokenToOptName'.
Function 'xf86TokenToOptinfo' may return constant 'NULL' at line 721, called at line 745.
Null pointer introduced at line 721 in function 'xf86TokenToOptinfo'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Our in-house parfait 1.1 code analysis tool complained that every exit
path from xf86ValidateModes() in hw/xfree86/common/xf86Mode.c leaks the
storeClockRanges allocation made at line 1501 with XNFalloc.
Investigating, it seems that this code to copy the clock range list to
the clockRanges list in the screen pointer is just plain insane, and
according to git, has been since we first imported it from XFree86.
We start at line 1495 by walking the linked list from scrp->clockRanges
until we find the end. But that was just a diversion, since we've found
the end and immediately forgotten it, and thus at 1499 we know that
storeClockRanges is NULL, but that's not a problem since we're going to
immediately overwrite that value as the first thing in the loop.
So we move on through this loop at 1499, which takes us through the
linked list from the clockRanges variable, and for every entry in
that list allocates a new structure and copies cp to it. If we've
not filled in the screen's clockRanges pointer yet, we set it to
the first storeClockRanges we copied from cp. Otherwise, as best
I can tell, we just drop it into memory and let it leak away, as
parfait warned.
And then we hit the loop action, which if we haven't hit the end of
the cp list, advances cp to the next item in the list, and then just
for the fun of it, also sets storeClockRanges to the ->next pointer it
has just copied from cp as well, even though it's going to overwrite
it as the very first instruction in the loop body.
v2: rewritten using nt_list_* macros from Xorg's list.h header
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The changes to miPointerSetPosition interface from int->double breaks
the SIS driver build, so time to bump this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DGA only handles master devices but it does intercept slave device events as
well (since the event handlers are per event type, not per device).
The DGA code must thus call into UpdateDeviceState to reset the button/key
state on the slave device before it discards the remainder of the event.
Test case:
- Passive GrabModeSync on VCP
- Press button
- Enable DGA after ButtonPress
- AllowEvents(SyncPointer)
- Release button
The button release is handled by DGAProcessPointerEvent but the device state
is never updated, so the slave ends up with the button permanently down.
And since the master's button state is the union of the slave states, the
master has the button permanently down.
X.Org Bug 59100 <http://bugs.freedesktop.org/show_bug.cgi?id=59100>
Reported-by: Steven Elliott <selliott4@austin.rr.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: Steven Elliott <selliott4@austin.rr.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>