There's no point in turning on outputs connected to GPU screens during initial
configuration. Not only does this cause them to just display black, it also
confuses clients when these screens are attached to a master screen and RandR
reports that the outputs are already on.
Also, don't print the warning about no outputs being found on GPU screens,
since that's expected.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
I didn't think we needed this before, but after doing some more
work with reverse optimus it seems like it should be called.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
scrn->display is a property of the main screen really, and we don't
want to have the GPU screens use it for anything when picking modes
or a front buffer size.
This fixes a bug where when you plugged a display link device, it
would try and allocate a screen the same size as the current running
one (3360x1050 in this case), which was too big for the device. Avoid
doing this and just pick sizes based on whats plugged into this device.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we disconnect an output/offload slave set the changed bits,
so a later TellChanged can do something.
Then when we remove a GPU slave device, sent change notification
to the protocol screen.
This allows hot unplugged USB devices to disappear in clients.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6703a7c7cf
Author: Keith Packard <keithp@keithp.com>
Date: Tue Jan 8 20:24:32 2013 -0800
hw/xfree86: Require only one working CRTC to start the server.
changed the logic to try to set the mode on all connected outputs rather
than abort upon the first failure. The return error code was then
tweaked such that it reported success if it set a mode on any crtc.
However, this confuses the headless case where we never enable any crtcs
and also, importantly, never fail to set a crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59190
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Also-written-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes build on non-udev systems, since XSERVER_PLATFORM_BUS is only
defined in configure.ac if $CONFIG_UDEV_KMS is true.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
So when we VT switch back and attempt to flush the input devices,
we don't succeed because evdev won't return part of an event,
since we were only asking for 4 bytes, we'd only get -EINVAL back.
This could later cause events to be flushed that we shouldn't have
gotten.
This is a fix for CVE-2013-1940.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Revert 70739e817b and mostly revert
c31eac647a.
Further investigation shows the encountered race condition is between
lightdm and plymouth-splash, as implemented in the Ubuntu distribution
within the limitations of upstart's job coordination logic, and can (and
should) be fixed within those limiations. Not in xserver itself.
This leaves some of the diagnostic improvements from the recent patch
series, in case others run into a similar situation.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This path is technically executed through config/udev, but having two
messages in the form "config/udev: Adding drm device" makes it appear as if
the udev filters are wrong and it's trying to add the same device twice. In
fact, it's only one device, only added once, but a duplicate log message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
We don't want to hotplug output devices while we are VT switched,
as we get races between multiple X servers on the device open, and
drm device master status. This just queues device opens until we return
from VT switch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This replaces some previous uses of direct xf86Screens[0] accesses.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This is just a simple interface to avoid accessing x86Screens[0]
directly.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This removes a large number of redundant declaration warnings.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
If other processes have had drm open previously, xserver may attempt to
open the device too early and fail, with xserver error exit "Cannot
run in framebuffer mode" or Xorg.0.log messages about "setversion 1.4
failed".
In this situation, we're receiving back -EACCES from libdrm. To address
this we need to re-set ourselves as the drm master, and keep trying to
set the interface until it works (or until we give up).
See https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/982889
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
And if we've had to delay booting due to not being able to set the
interface, fess up.
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Section "Monitor"
Identifier "a21inch"
Option "PreferredMode" "1600x1200"
Option "ZoomModes" "1600x1200 1280x1024 1280x1024 640x480"
EndSection
The option's effect is to search for and mark once each named mode in
the output modes list. So the specification order is free and the zoom
modes sequence follows the order of the output modes list. All marked
modes are available via the Ctrl+Alt+Keypad-{Plus,Minus} key
combination.
See also http://bugs.freedesktop.org/show_bug.cgi?id=17954.
This option has its use for combined monitor and television setups.
It allows for easy switching between 60 Hz and 50 Hz modes even when a
monitor refuses to display the input signal.
(Includes a few minor changes suggested by Aaron for v2)
Signed-off-by: Servaas Vandenberghe <vdb@picaros.org>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Otherwise, displays driven by GPU screens remain on all the time.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
So in the cold plug server shutdown case, we reap the resources
before we call CloseScreen handlers, so the config->randr_provider
is a dangling pointer when the xf86CrtcCloseScreen handler is called,
however in the hot screen unplug case, we can't rely on automatically
reaped resources, so we need to clean up the provider in the xf86CrtcCloseScreen
case.
This patch provides a cleanup callback from the randr provider removal
into the DDX so it can cleanup properly, this then gets called by the automatic
code for cold plug, or if hot unplug it gets called explicitly.
Fixes a number of random server crashes on shutdown
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58174
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=891140
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The previous fix for the previous fix, didn't fully work,
If we don't set compat_output we end up doing derferences
of arrays with -1, leading to valgrind warnings.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Due to another bug, the modesetting/udl driver would fail to init properly
on hotplug, when it did the code didn't clean up properly, and on removing
the device the server could crash.
Found in F18 testing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
xf86Cursor.c:19:18: warning: redundant redeclaration of 'inputInfo'
[-Wredundant-decls]
In file included from xf86Cursor.c:18:0:
../../../include/inputstr.h:614:57: note: previous declaration of
'inputInfo' was here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Unused as of 5d309af2ed
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
This is necessary when the input handler deletes itself from the
list. Bug found by Maarten Lankhorst, this patch uses the list macros
instead of open-coding the fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
man xorg.conf states that the 'Device' identifier is required in the
'Screen' section, yet current xserver defaults properly and boots up
fine without it.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=20742
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of defaulting to -intel for Oaktrail, Medfield, and CDV chips,
default to -fbdev. For Poulsbo (only), attempt to use -psb if it's
installed, and fallback to fbdev otherwise. All other Intel chips
should use -intel.
This fixed an issue where -intel would load on these chips and cause a
boot failure. Newer -intel drivers avoid the boot hang, but it's still
the wrong driver to load, so why take chances.
The patch was originally created by Stefan Dirsch for OpenSUSE. We have
included it in our stable release (Ubuntu "quantal" 12.10) since
December.
ref: https://bugzilla.novell.com/show_bug.cgi?id=772279
ref: https://bugs.launchpad.net/ubuntu/+bug/1069031
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60514
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If acpid sends a string in a format that we can't parse, bail out instead of
potentially dereferencing a NULL-pointer.
X.Org Bug 73227 <http://bugs.freedesktop.org/show_bug.cgi?id=73227>
Signed-off-by: Ted Felix <ted@tedfelix.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Call find_header first, returning on failure before calling malloc.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Found by parfait 1.1 memory analyser:
Memory leak of pointer 'pAdapt' allocated with malloc((88 * num_adaptors))
at line 162 of hw/xfree86/common/xf86xvmc.c in function 'xf86XvMCScreenInit'.
'pAdapt' allocated at line 158 with malloc((88 * num_adaptors)).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Also avoids leaving invalid pointers in structures if realloc had to
move them elsewhere to make them larger.
Found by parfait 1.1 code analyzer:
Memory leak of pointer 'newCallbacks' allocated with realloc(((char*)offman->FreeBoxesUpdateCallback), (8 * (offman->NumCallbacks + 1)))
at line 328 of hw/xfree86/common/xf86fbman.c in function 'localRegisterFreeBoxCallback'.
'newCallbacks' allocated at line 320 with realloc(((char*)offman->FreeBoxesUpdateCallback), (8 * (offman->NumCallbacks + 1))).
newCallbacks leaks when newCallbacks != NULL at line 327.
Memory leak of pointer 'newPrivates' allocated with realloc(((char*)offman->devPrivates), (8 * (offman->NumCallbacks + 1)))
at line 328 of hw/xfree86/common/xf86fbman.c in function 'localRegisterFreeBoxCallback'.
'newPrivates' allocated at line 324 with realloc(((char*)offman->devPrivates), (8 * (offman->NumCallbacks + 1))).
newPrivates leaks when newCallbacks == NULL at line 327.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reported by parfait 1.1 code analyzer:
Error: Null pointer dereference (CWE 476)
Read from null pointer 'p'
at line 746 of hw/xfree86/common/xf86Option.c in function 'xf86TokenToOptName'.
Function 'xf86TokenToOptinfo' may return constant 'NULL' at line 721, called at line 745.
Null pointer introduced at line 721 in function 'xf86TokenToOptinfo'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Our in-house parfait 1.1 code analysis tool complained that every exit
path from xf86ValidateModes() in hw/xfree86/common/xf86Mode.c leaks the
storeClockRanges allocation made at line 1501 with XNFalloc.
Investigating, it seems that this code to copy the clock range list to
the clockRanges list in the screen pointer is just plain insane, and
according to git, has been since we first imported it from XFree86.
We start at line 1495 by walking the linked list from scrp->clockRanges
until we find the end. But that was just a diversion, since we've found
the end and immediately forgotten it, and thus at 1499 we know that
storeClockRanges is NULL, but that's not a problem since we're going to
immediately overwrite that value as the first thing in the loop.
So we move on through this loop at 1499, which takes us through the
linked list from the clockRanges variable, and for every entry in
that list allocates a new structure and copies cp to it. If we've
not filled in the screen's clockRanges pointer yet, we set it to
the first storeClockRanges we copied from cp. Otherwise, as best
I can tell, we just drop it into memory and let it leak away, as
parfait warned.
And then we hit the loop action, which if we haven't hit the end of
the cp list, advances cp to the next item in the list, and then just
for the fun of it, also sets storeClockRanges to the ->next pointer it
has just copied from cp as well, even though it's going to overwrite
it as the very first instruction in the loop body.
v2: rewritten using nt_list_* macros from Xorg's list.h header
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The changes to miPointerSetPosition interface from int->double breaks
the SIS driver build, so time to bump this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DGA only handles master devices but it does intercept slave device events as
well (since the event handlers are per event type, not per device).
The DGA code must thus call into UpdateDeviceState to reset the button/key
state on the slave device before it discards the remainder of the event.
Test case:
- Passive GrabModeSync on VCP
- Press button
- Enable DGA after ButtonPress
- AllowEvents(SyncPointer)
- Release button
The button release is handled by DGAProcessPointerEvent but the device state
is never updated, so the slave ends up with the button permanently down.
And since the master's button state is the union of the slave states, the
master has the button permanently down.
X.Org Bug 59100 <http://bugs.freedesktop.org/show_bug.cgi?id=59100>
Reported-by: Steven Elliott <selliott4@austin.rr.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: Steven Elliott <selliott4@austin.rr.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Instead of requiring every mode set to complete successfully, start up
as long as at least one CRTC is working. This avoids failures when one
or more CRTCs can't start due to mode setting conflicts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This commit regresses dri1 since it moves the drmSetServerInfo from being
called at module load time to extension init time. However DRIScreenInit
relies on this being called before it gets control.
This patches moves the call into DRIScreenInit and seems to work here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Following commit 37d956e3ac
Author: Keith Packard <keithp@keithp.com>
Date: Mon Sep 10 11:14:20 2012 +1000
xf86: fix compat output selection for no output GPUs
headless servers can no longer startup as we no longer select a compat
output for the fake framebuffer.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56343
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For non-PCI video devices, such as those found on many ARM embedded
systems, the X server currently requires the BusID option to specify the
full path to the DRM device's sysfs node in order to properly match it
against the probed platform devices.
In order to allow X to start up properly if either the BusID option was
omitted or no configuration is present at all, the first video device is
used by default.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
K_OFF is a slightly broken interface, since if some other process
(cough, systemd) sets the console state to K_UNICODE then it undoes
K_OFF, and now Alt-F2 will switch terminals instead of summoning the
Gnome "run command" dialog.
KDSKBMUTE separates the "don't enqueue events" logic from the keymap, so
doesn't have this problem. Try it first, then continue falling back to
older methods.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=859485
Tested-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These functions are already declared in <X11/fonts/fontproto.h>.
Redeclaring them just for _X_EXPORT causes tons of warnings throughout
xserver, but they need to be declared somewhere to be picked up by
sdksyms.sh. Doing so in a private header limits the warnings to
sdksyms.c; fixing those as well would require changes to fontsproto.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Recent Linux kernels reworked the linux/input.h header file, which is
now part of the "user-space API". The include guard therefore has an
additional additional _UAPI prefix.
Instead of adding another case to the #ifdef, drop any include guard
checks and instead always undefine the BUS_* definitions on Linux.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix compilation of Xorg DDX without XF86VIDMODE since 6e74fdda, by putting
xf86vmode.c back under the XF86VIDMODE automake conditional it was accidentally
taken out of.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This call is required for external drivers (specifically NVIDIA) that do
not share the xfree86 infrastructure to update the desktop dimensions.
Without it, the driver would update the ScreenRecs but not update the total
dimensions the input code relies on for transformation.
This call is a thin wrapper around the already-existing internal call and
should be backported to all stable series servers, with the minor ABI bump.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CC: Andy Ritger <aritger@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
I noticed that the build-in int10 driver always reports
"Unable to retrieve all of segment 0x0C0000."
even though the entire BIOS data is retrieved with success.
The associated code is in hw/xfree86/int10/generic.c, in the function
xf86ExtendedInitInt10():
if (pci_device_read_rom(pInt->dev, vbiosMem) < V_BIOS_SIZE) {
xf86DrvMsg(screen, X_WARNING,
"Unable to retrieve all of segment 0x0C0000.\n");
}
The function pci_device_read_rom() is from libpciaccess; its return
value is not a size but an error status code: 0 means success.
If pci_device_read_rom() returns 0 for success, the warning is generated.
The proposed patch corrects the evaluation of the return value of
pci_device_read_rom() and of the supplied BIOS size.
Debian bug#686153
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 09e4b78f missed a case.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove any reference to mibstore.h and miInitializeBackingStore() from
the documentation.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove more backing store leftovers.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a really awkward interface, since we're calling it well before
the driver knows what device it's going to drive. Drivers with both KMS
and UMS support therefore don't know whether to say they need I/O port
access or not, and have to assume they do.
With this change we now call it only to query whether port access might
be needed; we don't use that to determine whether to call a driver's
probe function or not, instead we call them unconditionally. If the
driver doesn't check whether port access was enabled, they might crash
ungracefully. To accomodate this, we move xorgHWAccess to be explicitly
intentionally exported (sigh xf86Priv.h) so that drivers can check that
before they attempt port access.
v2: Move initial xf86EnableIO() nearer the logic that determines whether
to call it, suggested by Simon Farnsworth.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We load the driver list, then enable I/O, then call driver probe based
on whether I/O enable succeeded. That's bad, because the loaded
security policy might forbid port access. We happen to treat that as
fatal for some reason, which means even drivers that don't need I/O
access (like kms and fbdev) don't get the chance to run. Facepalm.
How about we just make that non-fatal instead, that sounds like a much
better plan.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Pull platform methods into their own sections for legibility, and
rewrite the ifdefs to be more concise.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If we are not seat 0 the following apply:
don't probe any bus other than platform
don't probe any drivers other than platform
assume the first platform device we match on the bus is the primary GPU.
This just adds checks in the correct places to ensure this, and
with this X can now start on a secondary seat for an output device.
v2: fix Seat0 macros
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This solves a race if we are trying to dynamically power off
secondary GPUs. Its not the greatest fix ever but it probably
as good as we can do for now.
The GPU probing causes the devices to be powered up, then when
we scan the PCI bus we get the correct information from the kernel,
rather than a bunch of 0xff due to the device being powered off.
drop gratuitous '&'.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
After we share the pixmap, the backing storage may have changed,
and we need to invalidate and buffers pointing at it.
This fixes GL compositors and prime windows lacking contents initially.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise we can't do fast user switch properly for multiple GPUs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is set by pre_init not screen init, so if we free it here
and then recycle the server, we lose all the providers.
I think we need to wrap FreeScreen here to do this properly,
will investigate for 1.14 most likely, safer to just leak this
on server exit for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit 9d457f9c55 added an array of
DevPrivateSetRec structures in the middle of the ScreenRec, which throws off
extension modules trying to call things like pScreen->DestroyPixmap.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The core RandR screen cleanup now involves cleaning up any GPU screen
associations, and those call down into DDX to clean up the driver. If
the pointers from the xf86 structures back to the core randr
structures are set to NULL at that point, bad things happen.
This patch "knows" that the core RandR close screen is underneath the
xf86 randr close screen function, and so makes sure it gets called
first.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
These are two minor changes, one to reset the pointer to NULL,
after freeing the pixmaps, one to make sure we use the right API for
the master pixmap, though I doubt it'll ever really matter.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
When the drawable disappears we need to free the prime master/slave combos.
This fixes a leak after a prime app is run.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The indenter seems to have gotten confused by initializing arrays of
structs with the struct defined inline - for predefined structs it did
a better job, so match that.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The RandR CRTC structures are freed when their resource IDs are
destroyed during server shut down, which is before the screen is
closed. Calling back into RandR with stale pointers just segfaults the
server.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Knut Petersen <knut_petersen@t-online.de>
Panning is at odds with CRTC cursor confinement. This disables CRTC cursor
confinement as long as panning is enabled.
Fixes regression introduced in 56c90e29f0.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's say - purely for the sake of argument, mind you - that you had a
server GPU with anemic memory bandwidth, and you walked up to it and
plugged in a monitor that was 1920x1080 because that's what happened to
be on the crash cart. Say the memory bandwidth is such that anything
larger than 1280x1024 gets filtered away. Now you're in trouble,
because the established timings section includes a 720x400 mode because
that's what DOS 80x25 is, and that happens to just about match the
physical aspect ratio.
Instead let's reuse the logic from the existing aspect-match path: pick
the larger mode of either the physical aspect ratio or 4:3.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We've had reports of two copies of the GLX bits, one in the server
and one in libglx.so causing problems, I didn't understand why the
X server needed a copy so drop it, however then we have to fix a missing
GlxExtensionInit that comes from sdksyms, so work around it by moving
that one declaration into a header that sdksyms doesn't scan.
Thanks to Jon Turney for debugging the actual problem.
(copyright header from extinit.h that seems most appropriate put on top).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52402
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DRI2GetParam was going through review in parallel with main batch of
C99 initialization changes - sync up now that both have landed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
These flags were unexported by commit a1d41e311c,
which moved the declarations around and lost the _X_EXPORT attributes in the
process. Since drivers need these and it's late in the release cycle, just
re-export them for now.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes an implicit declaration,
xf86AutoConfig.c:202:5: error: implicit declaration of function 'xf86PlatformMatchDriver' [-Werror=implicit-function-declaration]
xf86AutoConfig.c:202:5: warning: nested extern declaration of 'xf86PlatformMatchDriver' [-Wnested-externs]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Same as DRI2CreateDrawable, except it can return the DRI2 specific XID of the
DRI2 drawable reference to the base drawable.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
I hate this [redacted] script.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Based on the original patch by Chris Wilson, which was a better fix than mine.
We stash a copy of the desiredMode on the crtc so that we can restore it
after a vt switch. This copy is a simple memcpy and so also stashes a
references to the pointers contained within the desiredMode. Those
pointers are freed the next time the outputs are probed and mode list
rebuilt, resulting in us chasing those dangling pointers on the next
mode switch.
==22787== Invalid read of size 1
==22787== at 0x40293C2: __GI_strlen (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==22787== by 0x668F875: strdup (strdup.c:42)
==22787== by 0x5DBA00: XNFstrdup (utils.c:1124)
==22787== by 0x4D72ED: xf86DuplicateMode (xf86Modes.c:209)
==22787== by 0x4CA848: xf86CrtcSetModeTransform (xf86Crtc.c:276)
==22787== by 0x4D05B4: xf86SetDesiredModes (xf86Crtc.c:2677)
==22787== by 0xA7479D0: sna_create_screen_resources
(sna_driver.c:220)
==22787== by 0x4CB914: xf86CrtcCreateScreenResources (xf86Crtc.c:725)
==22787== by 0x425498: main (main.c:216)
==22787== Address 0x72c60e0 is 0 bytes inside a block of size 9 free'd
==22787== at 0x4027AAE: free (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==22787== by 0x4A547E: xf86DeleteMode (xf86Mode.c:1984)
==22787== by 0x4CD84F: xf86ProbeOutputModes (xf86Crtc.c:1578)
==22787== by 0x4DC405: xf86RandR12GetInfo12 (xf86RandR12.c:1537)
==22787== by 0x518119: RRGetInfo (rrinfo.c:202)
==22787== by 0x51D997: rrGetScreenResources (rrscreen.c:335)
==22787== by 0x51E0D0: ProcRRGetScreenResources (rrscreen.c:475)
==22787== by 0x513852: ProcRRDispatch (randr.c:493)
==22787== by 0x4346DB: Dispatch (dispatch.c:439)
==22787== by 0x4256E4: main (main.c:287)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36108
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
No drivers used this, so it got unexported, and now it's so unused it
got culled during the link. Take the poor function out behind the shed
and put it out of its misery.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 0c6987df in June 2008 disabled XAA offscreen pixmaps per default,
as they were broken, leaving XAA only able to accelerate operations
directly on the screen pixmap and nowhere else, eliminating acceleration
for basically every modern toolkit, and any composited environment.
So, it hasn't worked for over four years. No-one's even come close to
fixing it.
RIP.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
setupFunc was used as an early callback for half-modular extensions such
as Xv, XvMC and DGA to set up hooks between the core server and the
modular component. Now we've rid ourselves of that, we can also bin
setupFunc.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than having a non-Xorg and an Xorg-specific path which basically
just duplicated each other for no reason, we could ... just have one.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
There was nothing XFree86-specific or loader-specific about this, aside
from using xf86MsgVerb instead of ErrorF.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In preparation for gutting loadext.c, move the ExtensionModule struct to
the DIX, and unexport ExtensionModuleList (why, why, why, why was this
ever exported in the first place, tbqh).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Extensions could previously declare initialisation dependencies on other
extensions, which would then get nicely sorted by the loader. We only
had one user for this, GLX, which had one pointless (Composite) and one
possibly useful dependency (DBE). As DBE is now a built-in, it will
always be sorted by GLX, so we no longer have any users for it.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
GLX was the only user of extension init order dependencies, using them
to depend on Composite, which has always been built-in anyway, and DBE,
which is now built-in.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make sure we add static extensions before anything in a module. This is
more or less a no-op at the moment, but will come in handy later when
extension dependency sorting is removed.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of keeping a tiny amount of code in an external module, just man
up and build it into the core server.
v2: Fix test/Makefile.am to only link libdri2.la if DRI2 is set
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
DRI2DestroyDrawable() was still being _X_EXPORTed, but hasn't existed
since 1da1f33f last year.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
AM_CFLAGS will suffice, given we only have one target in this directory.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than building the tiny amount of code required for XFree86-DRI as
an external module, build it in if it's enabled at configure time.
v2: Fix test/Makefile.am to only link libdri.la if DRI is set
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
fixup for DRI1 move
Signed-off-by: Keith Packard <keithp@keithp.com>
extmod was originally a big pointless module. Now it's an empty,
pointless module. This commit makes it unexist.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
As with DGA, move VidMode from being part of extmod to a built-in part
of the server, if compiled as such. This is initialised from
xf86ExtensionInit rather than miinitext because it's wholly dependent on
the Xorg DDX.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The DGA event base used to have to be passed through a function pointer,
as the code was cleaved in two with half in a module, and half in the
core server. Now that's not the case, just access DGAEventBase
directly.
v2: Deal with Alan's event initialization cleanups
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than leave DGA languishing in extmod, move it to be a built-in
extension. As it's quite specific to the Xorg DDX, just move it
sideways to the rest of the DGA code in hw/xfree86/common, and
initialise it from xf86ExtensionInit, rather than miinitext.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of letting it languish in extmod just because we want to
configure bits of it from xf86, move XSELinux to the builtin part of
Xext, and do its configuration from xf86ExtensionInit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xv used to call XvScreenInit and co. through function pointers, as
XvScreenInit may have been sitting on the other side of a module
boundary from xf86XvScreenInit. Why this was so is a mystery, but make
it not so any more.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
We no longer have anything in the tree that checks for XorgLoader. This
was a fairly monumental hack: xvdi.h used to hide all its functions
behind #ifndef XorgLoader, solely to avoid sdksyms.sh picking up its
symbols, as it was previously a module rather than built-in.
This is no longer the case, so we can remove the define.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build these extensions into the core server, rather than letting
them languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build XRes support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build DPMS support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we've built MIT-SCREEN-SAVER support, then just build it into the
main binary, rather than leaving it in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than languishing in its own special module, move RECORD into the
core server.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If DBE support is compiled in the server, just man up and build it into
the server, rather than having it as an external module.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the array gets down to size zero (which it does in later patches),
gcc complains that the index is out of bounds. Avoid this by using
ARRAY_SIZE on extensionModules instead.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Stéphane Marchesin <stephane.marchesin@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86ExtensionInit is called after configuration file parsing, so it can
perform the two parts of extension initialisation currently done by
extmod: enabling and disabling of extensions through an 'omit' option,
and SELinux configuration.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
EXTERN_MODULE was used to specify that we shouldn't worry about modules
lacking a ModuleData object. It was also completely unused. *shrug*
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than making poor old miinitext.c do it, including making DMX
have fake symbols just to keep it happy.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Stéphane Marchesin <stephane.marchesin@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
INITARGS was a hardcoded define to void. Since knowing the function
signature for your extensions is kinda useful, just replace it with a
hardcoded void, but leave the define there for API compatibility.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Huh, so I guess INITARGS used to be int argc, char *argv then. Either
way, it's now void, so fix that ...
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
libxorgxkb.a contains a number of libraries which are used by XKB action
code to call back into the DDX, e.g. for VT switching, termination, grab
breaking, et al. Make sure libxkb.a comes first in the link order, so
it can mark XkbDDX* as used in order for the linker to not discard them.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Ensures padding bytes are zero-filled
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Seems silly waiting to check if the client failed to send us enough bytes
until after we've already tried using them.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
When passing variable pointers to functions or otherwise doing long
sequences to compute values for replies, create & use some new
temporary variables, to allow for simpler initialization of reply
structures in the following patches.
Move memsets & other initializations to group with the rest of the
filling in of the reply structure, now that they're not needed so
early in the code path.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Each DDX currently calls OsReleaseSIGIO in case it was suspended when
the server regen started. This causes a BUG to occur if SIGIO was
*not* blocked at that time. Instead of relying on each DDX, make the
OS layer reliably reset all signal state at server init time, ensuring
that signals are suitably unblocked and that the various signal state
counting variables are set back to zero.
Signed-off-by: Keith Packard <keithp@keithp.com>
Otherwise, OsReleaseSIGIO will complain, or perhaps something worse
will happen (if SIGIO actually needs to be blocked here).
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a static mask of prime id and allocate them at screen time,
if the driver supports the prime interfaces and is a gpu screen.
This is instead of them changing due to user controlled randr commands,
as suggested by Keith.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the initial prime support for dri2 offload. The main thing is
when we get a connection from a prime client, we stored the information
and mark all drawables from that client as prime. We then create all
buffers for that drawable on the prime device dri2screen.
Then DRI2UpdatePrime is provided which drivers can call to get a shared
pixmap which they can use as the front buffer. The driver is then
responsible for doing the back->front copy to the shared buffer.
prime requires a compositing manager be run, but it handles the case where
a window get un-redirected by allocating a new pixmap and pointing the crtc
at it while the client is in that state.
Currently prime can't handle pageflipping, so always does straight copy swap,
v1.1: renumber on top of master.
v1.2: fix auth on top of master.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for setting the offload sink to the xf86 ddx.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is so we can tell the scanout pixmap has changed between calls
to the crtc set function.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>