AX_TLS detects when toolchains support __thread or __declspec(thread),
but existing code assumed __thread.
This also adds a check to configure.ac to error out if TLS is requested
but unsupported.
Found-by: Tinderbox
http://tinderbox.x.org/builds/2011-03-22-0007
Regression-from: 82b1eaa6ca
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Tom Fogal <tfogal@alumni.unh.edu>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
A handful of modules have begun adding unit test programs.
These macros will help providing a consistent interface which will
help package builders and developers to manage the functionality.
XORG_ENABLE_UNIT_TESTS will turn on/off unit testing, regardless
of how it is implemented. The default (yes/no) can be specified by each
module. It can be used by itself if glib or -wrap support is not needed.
XORG_WITH_GLIB will probe the system for glib-2.0. A different version
can be specified in each module. It will consult XORG_ENABLE_UNIT_TESTS
but can be used by itself in contexts other then unit testing.
The default (yes/no) can be specified by each module.
XORG_LD_WRAP will probe the linker for -wrap support. It will consult
XORG_ENABLE_UNIT_TESTS but can be used by itself in contexts
other then unit testing.
configure options:
--enable-unit-tests Enable building unit test cases (default: auto)
--with-glib Use GLib library for unit testing (default: auto)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
No functional changes.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Valgrind complains about uninitialized data being written to clients.
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was leftover from some older ways of building dmx/scale docbook.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were two memory leaks in the function: one was the lack of free
for "enabled", the other was the full lack of releasing anything when
configuration was too small. The first issue was fixed by adding the
missing free, the other was addressed by replacing the duplicate
memory releasing sequences with one that is gotoed into.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
When XDMCP -from is specified, only register the requested address,
rather than the requested address, and any others we have of different
address families to the requested address.
e.g. if we have 4 interfaces with both IPv4 and IPv6 addresses (which
are not IPv6 mapped IPV4 addresses), using -from with one of those IPv4
addresses currently means only that IPv4 address, and all IPv6 addresses
are used in the connection data in XDMCP REQUEST packet.
(See http://cygwin.com/ml/cygwin-xfree/2011-02/msg00000.html)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
These functions no longer go through the screen vtable, so remove
them and fix up the various wrappers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
There is no need to virtualize this function that nobody cares about.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
There is no need to virtualize this function that nobody cares about.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
The record allocated by miSpriteDeviceCursorInitialize was not being
released.
This patch makes misprite use dixRegisterPrivateKey with the record
size argument, which handles the memory management
issues. miSpriteDeviceCursorInitialize is restructured to initialize
pCursorInfo only if miDCDeviceInitialize succeeds. The record itself
is zeroed on cleanup to ensure that the assumptions in the code still
hold.
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The record allocated by miSpriteDeviceCursorInitialize was not being
released.
This patch makes misprite use dixRegisterPrivateKey with the record
size argument, which handles the memory management issues.
miSpriteDeviceCursorInitialize is restructured to initialize pCursorInfo
only if miDCDeviceInitialize succeeds. The record itself is zeroed on
cleanup to ensure that the assumptions in the code still hold.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The only user of the geometry coordinates is the software sprite code,
which uses them to remove the pointer whenever the window beneath is
being used as a source. However, using Window pictures as a source is
extremely rare (let alone *partial* windows), so there is no harm done
in just validating all of the drawable.
Additionally, the miSourceValidate() function was buggy in at least
three respects:
(a) It added drawable->{x,y} before calling down, which is wrong since
the misprite code already adds them in its check. (Alternatively,
the misprite code is wrong, but there are actual users who would
notice if that code was broken).
(b) It didn't account for the width of the interpolation filter, so if
the Picture had a bilinear or convolution filter, the edges
surrounding the source area would not be validated.
(c) It didn't validate alpha maps.
Finally, computing the bounding box of the transform on every
composite request was a real performance issue in pixman, so
presumably it could be one here as well.
This patch changes miSourceValidate() to simply validate all of the
underlying drawable.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
long is needlessly long on LP64.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
size needn't be a long. No change on ILP32 but, combined with the
previous change, 56 -> 40 bytes on LP64.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
unsigned long is needlessly large on LP64. Use uint32_t instead.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
DRI, DRI2 and swrast all had near-identical driver probing logic.
Pull it into glxdricommon.
[ajax: warning fix]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Confine cursor motion to within the bounds of a single CRTC, iff all the
CRTCs within a ScreenRec are reachable from each other. If not you get
the same "cursor floats within the bounding rect" behaviour you get now.
v3:
- Incorporate review feedback from Christopher James Halse Rogers
v4:
- Add mode field.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
v2: Cover more paths, spotted by Daniel Stone.
v3: pass down the mode field for movement mode.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This has less purpose as a test but more as documentation on how to actually
use the differnent list calls.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This converts all the remaining 1->num loops to the macro,
this removes nearly all the panoramiXNumScreens usage in
loops, and is a step to replacing it.
v2: move some from the other patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This just uses the FOR_NSCREENS macro instead.
v2: remove some of the 1->x loops.
v3: drop the 1->0 loop, will rework later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This adds a new FOR_NSCREENS_FORWARD_SKIP, which skips the first
element and is a common idiom throughout panoramiX code.
It then adds a new inline function to hide id assignment to a
panoramiX resource and cleans up lots of common repeated code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
this code appears in quite a few places, consolidate it into
a macro in a header.
v2: align braces with macro just above it, and with
lines removed
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
record.c:810:9: warning: unused variable 'count'
Scope-shadowed by a later variable of the same name, safe to just
delete.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
eventconvert.c:287:9: warning: enumeration value 'ET_Enter' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_Leave' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_FocusIn' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_FocusOut' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_DeviceChanged' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_Hierarchy' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_DGAEvent' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_RawKeyPress' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_RawKeyRelease' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_RawButtonPress' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_RawButtonRelease' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_RawMotion' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_XQuartz' not handled in switch
eventconvert.c:287:9: warning: enumeration value 'ET_Internal' not handled in switch
From the code it appears these are can't happens, so if they ever do,
BadImplementation seems entirely appropriate.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
getevents.c:770:5: warning: suggest parentheses around '&&' within '||'
Introduced with dc57f89959e549403f8488eb9f23425bd7118b22:
- if(dev->u.master && dev->valuator) {
+ if(dev->valuator && IsMaster(dev) || !IsFloating(dev)) {
So I'm assuming the two terms around the || are meant to be a unit.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If modifiers failed, the reply length was 4 bytes too short.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
ChangeDeviceProperty and XIChangeProperty are followed by some data, so
use REQUEST_AT_LEAST_SIZE instead of REQUEST_SIZE_MATCH.
X.Org bug#35082 <https://bugs.freedesktop.org/show_bug.cgi?id=35082>
Reported-by: Markus Fleschutz <markus.fleschutz@x-software.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
NewInputDeviceRequest steals the contents of option list elements but
doesn't use the elements themselves for anything. Therefore the list
elements need to be released always.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Devices usually enable SIGIO processing in EnableDevice. CheckMotion
initialises the pointer sprite, sends Enter/Leave events, etc. This leaves
us with a small window where events may be processed without the sprite or
pointer position (as seen from the protocol) is valid.
Block signals during this window.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
configScreen used a dynamically allocated buffer for XF86ConfScreenRec
when conf_screen argument was NULL. This pointer was never stored
anywhere, nor was it released, so this patch makes the function use
automatically allocated storage in that situation.
[ajax: minor grammar fix]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
We can guarantee that the X server does not call DRI driver services
from multiple threads, so _glapi_check_multithread need never do
anything special. As a result, ThreadSafe is always false, so remove it
and simplify expressions where it appeared to match.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
