This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This was leftover from some older ways of building dmx/scale docbook.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were two memory leaks in the function: one was the lack of free
for "enabled", the other was the full lack of releasing anything when
configuration was too small. The first issue was fixed by adding the
missing free, the other was addressed by replacing the duplicate
memory releasing sequences with one that is gotoed into.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
These functions no longer go through the screen vtable, so remove
them and fix up the various wrappers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
This converts all the remaining 1->num loops to the macro,
this removes nearly all the panoramiXNumScreens usage in
loops, and is a step to replacing it.
v2: move some from the other patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This just uses the FOR_NSCREENS macro instead.
v2: remove some of the 1->x loops.
v3: drop the 1->0 loop, will rework later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Devices usually enable SIGIO processing in EnableDevice. CheckMotion
initialises the pointer sprite, sends Enter/Leave events, etc. This leaves
us with a small window where events may be processed without the sprite or
pointer position (as seen from the protocol) is valid.
Block signals during this window.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
configScreen used a dynamically allocated buffer for XF86ConfScreenRec
when conf_screen argument was NULL. This pointer was never stored
anywhere, nor was it released, so this patch makes the function use
automatically allocated storage in that situation.
[ajax: minor grammar fix]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
v2: Slightly more obvious sizing math.
==14882== Invalid write of size 2
==14882== at 0x6750267: VBEGetVBEInfo (vbe.c:400)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
==14882== Address 0x4f32fa8 is 72 bytes inside a block of size 73 alloc'd
==14882== at 0x4A0640D: malloc (vg_replace_malloc.c:236)
==14882== by 0x675024B: VBEGetVBEInfo (vbe.c:398)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
sdksyms.c is constructed by processing header files with the C
preprocessor. Its contents will vary depending on the precise
configuration options, and so must depend on the config header
files.
We have one header file which is always changed when any config option
is modified called do-not-use-config.h (which may want a different
name at some point), so make sdksyms.c depend on that file.
Also, we don't want to ship this file; it always needs to be
built. So, include it in the nodist_libloader_la_SOURCES list to
prevent it from being added to the tarball.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Since commit b8d9c5ff removed commonOptions, we now
need to append the "Core{Keyboard,Pointer}" options to
the existing list.
Fixes passing options to devices confirured in xorg.conf
on systems where autoaddevices is false.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We now support using RandR to set the resolution of the primary display (and
place a shielding window on other displays) in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Instead of listing one of the doxygen output files and depending on
sequential execution to ensure that the other files were present
before make checked for them, create explicit dependencies so that
make will not check for the additional files until after doxygen has
been run.
This allows parallel make to work correctly in this directory.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
Tarballs include the downloaded gl spec files, which will end up in
$(srcdir). But, git-based builds will not have them at all and will
need to download them from opengl.org. They'll land in in the build
directory instead of $(srcdir), and so we need to allow them to be in
either place.
This change checks for the files in $(srcdir), linking them to . if
present. Otherwise, it downloads them from opengl.org.
A suggested better solution is to have Mesa install these files somewhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
The paths in doxygen.conf assumed that srcdir=builddir and broke
otherwise. Use autoconf to fill in the paths to the srcdir so that the
files can be found when users have a separate build directory (as with
distcheck).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Non-GNU makes don't deal with the sinclude or -include variants that
allow Makefile stubs to be created and then included during the build.
Instead, create an empty file at the end of configure so that the
regular include statement can be included. This is how automake handles
automatic source dependencies.
In order to trick automake into not processing the include statement, a
variable is used.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>
In OpenBSD removed support PCCONS in 2002 year
http://marc.info/?l=openbsd-cvs&m=102435816424294&w=2
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Signed-off-by: Keith Packard <keithp@keithp.com>
Inferring modes from sync ranges is only valid if the monitor says it's
valid. If the monitor says it's valid, then we'll have already added
those modes during EDID block parse. If it doesn't, then we should
believe it.
If there's no EDID for an output, but sync ranges from the config, we'll
still add default modes as normal.
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxvendor.c: In function ‘__glXVForwardPipe0WithReply’:
glxvendor.c:205:10: warning: ‘be_buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxvendor.c: In function ‘__glXVForwardAllWithReply’:
glxvendor.c:284:10: warning: ‘be_buf’ may be used uninitialized in this function
glxvendor.c:285:10: warning: ‘be_buf_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXForwardPipe0WithReply’:
glxsingle.c:218:10: warning: ‘be_buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXForwardAllWithReply’:
glxsingle.c:300:10: warning: ‘be_buf’ may be used uninitialized in this function
glxsingle.c:301:10: warning: ‘be_buf_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxsingle.c: In function ‘__glXDisp_ReadPixels’:
glxsingle.c:760:11: warning: ‘buf’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
render2swap.c:264:13: warning: ‘swapArray’ defined but not used
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateGLXPixmap’:
glxcmds.c:1663:20: warning: comparison between pointer and integer
glxcmds.c:1663:38: warning: comparison between pointer and integer
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateGLXPixmap’:
glxcmds.c:1641:22: warning: ‘pGlxScreen’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘CreateContext.clone.6’:
glxcmds.c:105:19: warning: ‘be_fbconfigId’ may be used uninitialized in this function
glxcmds.c:104:14: warning: ‘be_vid’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘__glXGetDrawableAttributes’:
glxcmds.c:3295:8: warning: ‘screen’ may be used uninitialized in this function
glxcmds.c:3298:8: warning: ‘attribs_size’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glxcmds.c: In function ‘__glXChangeDrawableAttributes’:
glxcmds.c:3464:8: warning: ‘screen’ may be used uninitialized in this function
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Same result, but now also triggers on slave keyboards that send pointer
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
The calling for allocate_or_reuse_buffer may fail due to some reason, e.g. out of memory.
If the buffers[] were not initialized to be NULL, the following err_out may try to access an illegal memory, which will cause X crash afterward.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Justin Dou <Justin.Dou@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows set_percent_option in synaptics to work as described,
and should generally enable to check option syntax without log spam.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InitInput simply initialises all input devices now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Did you know that anonymous enums with function scope will not only
override the enum values from global scope, but will be treated as
entirely different types? C's type system just rules.
xf86Crtc.c: In function 'handle_detailed_monrec':
xf86Crtc.c:1555:33: warning: comparison between 'enum det_monrec_source' and 'enum <anonymous>'
xf86Crtc.c:1562:33: warning: comparison between 'enum det_monrec_source' and 'enum <anonymous>'
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
It's broken for devices with BARs above 4G, and the sysfs method should
work everywhere anyway. As a pleasant side effect, this fixes some
warnings:
fbdevhw.c: In function 'fbdev_open_pci':
fbdevhw.c:333:4: warning: cast from pointer to integer of different size
fbdevhw.c:334:4: warning: cast from pointer to integer of different size
fbdevhw.c:336:4: warning: cast from pointer to integer of different size
fbdevhw.c:337:4: warning: cast from pointer to integer of different size
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
helper_exec.c: In function 'pciCfg1in':
helper_exec.c:507:4: warning: passing argument 2 of 'pci_device_cfg_read_u32' from incompatible pointer type
/usr/include/pciaccess.h:153:5: note: expected 'uint32_t *' but argument is of type 'CARD32 *'
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
xf86VidMode.c: In function 'VidModeGetMonitorValue':
xf86VidMode.c:637:19: warning: 'ret.i' may be used uninitialized in this function
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Add a keycode mapping for VK_OEM_8 as RCtrl, which is issued by Canadian
Multilingual Standard layout
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Ignore MappingNotify events sent to clipboard integration client,
xmodmap changes aren't of interest to it, but there is no mechanism
to express that disinterest.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Replace useless #if 0/ErrorF/#endif with winDebug
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
If none of Xv ports were affected by window tree modifications we don't
want scan the port list. To avoid useless scanning of port list
PostValidateTree hook is only registered when ClipNotify was called for
any port.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
ValidateTree calls first ClipNotify and later might call
WindowExposures. To avoid useless double reput ClipNotify delays reput
to WindowExposures or PostValidateTree.
PostValidatTree checks all ports if there is clip changes. On clip
changes reput is done to move or scale the overlay.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
If window gets exposed but clipboxes doesn't change drivers would avoid
color key fill. This makes XResizeWindo&co to lose colorkey if
background is painted.
To help drivers to avoid filling colorkey for each put server can
provide helper function if there is exposed areas. Server can subtract
exposed areas from filled region.
As a side effect we can avoid useless color key fills if window only
moves in screen without background fills.
v3:
* Change tracking to filled area to account for client initiated clip
changes
* Make overlaid XvPutImage behavior like textured XvPutImage or PutImage
* Make region dynamically allocated only when required.
v4:
* Simplify new driver interface to reduce duplicate code
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
xf86XVFillKeyHelperDrawable can be used to implement
xf86XVFillKeyHelper.
V2:
* Remove RegionTranslate that clobbered parameter region.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
The EDID processing regards physical dimensions of 0mm x 0mm as
invalid. Previously the old values for height and width would be
preserved if none of the physical dimension specifications in the new
EDID were considered valid.
This will come up in particular if first a monitor is connected to an
output, and then a projector is connected. Since projectors generally
report physical dimensions of 0mm x 0mm, this would result in the
projector claiming to have the physical dimensions of the monitor.
Signed-off-by: Evan Broder <ebroder@mokafive.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DGAIsDgaEvent() is not used anymore.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Move some variables to the scope where they are used.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously some sort of absolute coordinates were sent out in
the padding of the DGA2 Motion and Button events. DGAMouseX
and DGAMouseY were used to keep track of said coordinates.
libXxf86dga doesn't use that data for anything, and at least
git history didn't show any past usage either. So let's just
remove the last remnants of of this mess.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Copy dx/dy from the internal event to the DGA2 Motion/Button events.
Do the same for Key events for the sake of keeping the code consistent.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
mieq_installed is used as a boolean, so why not make it such. Also
it's a static variable, so the the explicit zero initialization can
be removed.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove the handler only if it was installed. Also mark it as
uninstalled, otherwise it wouldn't get reinstalled after a
server reset.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The ET_DGAEvent handler is only installed when a client
requests relative events via DGA1. Do it also when a client
requests DGA2 events.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
DGA key event support was lost in commit
8da0ff2d51. Bring it back.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We get an XP_EVENT_DISPLAY_CHANGED event when our display configuration is
changed. If this change was caused by hotplugging a monitor or Mac Display
Preferences changes by the user, we need to call RRScreenSizeNotify in order
to ensure new connections get the correct screen size.
http://xquartz.macosforge.org/trac/ticket/460
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
xdmxconfig.c: In function ‘dmxConfigCanvasDraw’:
xdmxconfig.c:299:23: warning: ‘maxHeight’ may be used uninitialized in this function
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: In function ‘dmxBlockHandler’:
dmxinputinit.c:610:44: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxWakeupHandler’:
dmxinputinit.c:637:41: warning: cast from pointer to integer of different size
dmxinputinit.c: In function ‘dmxInputInit’:
dmxinputinit.c:1041:36: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxinputinit.c: At top level:
dmxinputinit.c:135:29: warning: ‘DMXCommonOth’ defined but not used
DMXCommonOth is actually mentioned in a #if 0 block, so delete it and
the block that references it. If anyone needs it, git remembers.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
dmxgc.c: In function ‘dmxChangeClip’:
dmxgc.c:386:5: warning: case label value exceeds maximum value for type
dmxgc.c:387:5: warning: case label value exceeds maximum value for type
dmxgc.c:388:5: warning: case label value exceeds maximum value for type
dmxgc.c:389:5: warning: case label value exceeds maximum value for type
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Dear gcc: I do not care about machines where sizeof(void *) <
sizeof(int), and neither should you.
dmxextension.c: In function ‘dmxBECreateResources’:
dmxextension.c:858:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderPict’:
dmxextension.c:1062:29: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxBERestoreRenderGlyph’:
dmxextension.c:1084:35: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxAttachScreen’:
dmxextension.c:1277:8: warning: cast to pointer from integer of different size
dmxextension.c:1286:34: warning: cast to pointer from integer of different size
dmxextension.c:1292:35: warning: cast to pointer from integer of different size
dmxextension.c: In function ‘dmxBEDestroyResources’:
dmxextension.c:1456:26: warning: cast from pointer to integer of different size
dmxextension.c: In function ‘dmxDetachScreen’:
dmxextension.c:1599:8: warning: cast to pointer from integer of different size
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Fix winShadowUpdateDD(|NL) so we don't try to blit to primary surface if it didn't get allocated
(Intel drivers, in particular, seem to like to issue a WM_DISPLAYCHANGE during a suspend/resume
cycle, but not allow surface to be allocated right then)
Also:
Use winReleasePrimarySurfaceShadowDD(|NL) in winFreeFBShadowDD(|NL) rather than open coding it
Don't mess about recreating surface if we're going to resize it anyhow
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Make ShadowGDI drawing engine only change the size of the screen
pixmap/shadow framebuffer on an RANDR change, not the bpp/depth
as well.
The server requires the screen pixmap's depth to be invariant.
Other drawing engines aren't quite as affected by this issue as
they won't draw to the display, if it has changed colour depth,
but probably still need some attention.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
This is only relevant to pre-NT versions of Windows, which are all EOL.
Also, it's in the wrong place now as framebuffer can get resized.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Fortunately, these swapped constants are benign as they have the same
value, 0
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Don't turn off -multiplemonitors when all monitors don't have the
same pixel format and when using shadow GDI engine, just warn that
performance may be degraded
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
When RANDR resizing is enabled, generate an internal RANDR change when
WM_DISPLAYCHANGE occurs in rootless modes for screens which occupy an
entire monitor or the virtual desktop.
Store the monitor number and use that to handle WM_DISPLAYCHANGE for a
screen specified with '-screen @monitor'
In rooted mode, WM_DISPLAYCHANGE isn't relevant (except where display
depth changes may cause problems). (A maximized screen window will get
WM_SIZE to adjust it to the new monitor size)
In rooted fullscreen mode, WM_DISPLAYCHANGE shouldn't be seen, as we
have the resolution we have selected for the fullscreen session)
(Could client randr requests be handled in fullscreen to cause a change
of the fullscreen resolution? )
Don't bother do a RANDR resize if the dimensions aren't actually changing
when WM_DISPLAYCHANGE is sent (should handle WM_DISPLAYCHANGE to size 0x0
that the intel driver seems to like to send)
Various debug output improvements
Also, remove the note that XWin can't handle display mode changes from
the man page
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
To avoid recursion, WM_SIZE requests shouldn't generate XRANDR requests
when no change is neeeded.
We do the actual resize on WM_EXITSIZEMOVE, as resizing occurs in
a modal loop, to avoid a backlog of resize events building up as
the X server doesn't get a change to process anything until the resize
is completed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Implement framebuffer resizing in RANDR extension:
Resize the frame buffer, the screen's root window and the native window
containing the root window image.
Correctly allow for decorations in new native window size when resizing native window
to fit the new framebuffer size with AdjustWindowRectEx()
Update physical size info for a screen when it is changed by RANDR
Forbid client-requested RANDR changes in fullscreen and rootless modes
Only resize window on an external RandR request, to avoid recursing on
a WM_SIZE requested resize.
Also, add prototypes for winRandRInit() and winDoRandRScreenSetSize() to header file
Also, update the author list and copyright for winrandr.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Add -resize command line option to configure how native window sizing frame
is used.
In additions to the existing fixed and scrollbars modes, add a new mode to
allow framebuffer to be resized using native window frame
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Move QueryMonitor() out of windprocarg.c into a new file, winmonitors.c,
as we use to use it from other places as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Remove an attempt at the rather difficult optimization of detecting
if WM_DISPLAYCHANGE affects any of the monitors which intersect the
native window for the X screen.
We'll always act as if it does, which it probably usually the case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
(This stored calculation was wrong if -dpi came after -screen on the command
line, anyhow)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Refactor the drawing engines so we can explicitly allocate and release the framebuffer for a screen
Move the setting of dwPaddedWidth into the DDNL engine, so it is updated when the framebuffer changes size
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Some trivial build fixes required
Also fill out all function pointers for primaryfb engine
Also tidy up the man page section describing drawing engines.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Following the convention makes it easier to locate man pages,
user's or developer's documentation and specifications.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Makefile.am: there are only 4 string substitutions to be done in this file.
SED is much simpler than the C pre processor which adds its own
strings which must be substituted by sed, still.
xorgconf.cpp: replaced __xconfigfile__ with xorg.conf as this file name
is hard coded in the xserver configuration and cannot change.
Replace XCOMM with # permanently.
Delete cpprules.in as it isn't used anywhere else. Should one need
cpprules for real cpp work, there is one in Xquartz from which the
the old man pages code have been stripped.
Fix trailing spaces.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create a manpages.am makefile snippet in the root dir.
Each man page makefile includes manpages.am.
Now all man pages in xserver are generated the same way
using the same method as all of other xorg modules.
All ".man.pre" files in git are ".man" now.
Links are no longer created between different file types.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use standard directory and makefile.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Now can be built easily on any platform in the man directory
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is dead code which will not be used in the future.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man)
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
In order to use libxf86config in a shared library, all the code must be
compiled with -fPIC. Add proper PIC support for libxf86config by turning
it into a libtool library. However, since we don't want to guarantee API
or ABI stability, make sure it's only built static.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
The extra SourceValidate calls from damageCopyArea and damageCopyPlane
can be removed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
cc2c73ddcb4370a7c3ad439cda4da825156c26c9's three-cent titanium tax
doesn't go too far enough. Fix the rest of the call and jmp
instructions to handle the data prefix correctly.
Reference: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 2A: Instruction Set Reference, A-M
http://www.intel.com/Assets/PDF/manual/253666.pdf
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Cast it to a char *, mimicking the return immediately below it.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
lnx_agp.c: In function ‘xf86DeallocateGARTMemory’:
lnx_agp.c:267: warning: cast to pointer from integer of different size
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
render2.c: In function ‘__glXDisp_Map2d’:
render2.c:127: warning: ‘u1’ may be used uninitialized in this function
render2.c: In function ‘__glXDisp_Map1d’:
render2.c:90: warning: ‘u1’ may be used uninitialized in this function
Remove unnecessary test, and change memcpy to memmove as all users were
doing overlapping copies.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xcmisc.c:202: warning: no previous prototype for ‘XCMiscExtensionInit’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
dri.c: In function ‘DRIScreenInit’:
dri.c:434: warning: cast from pointer to integer of different size
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
loadmod.c: In function ‘FreeSubdirs’:
loadmod.c:377: warning: passing argument 1 of ‘free’ discards qualifiers
from pointer target type
/usr/include/stdlib.h:488: note: expected ‘void *’ but argument is of
type ‘const char *’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86AutoConfig.c: In function ‘FreeList’:
xf86AutoConfig.c:123: warning: passing argument 1 of ‘free’ discards
qualifiers from pointer target type
/usr/include/stdlib.h:488: note: expected ‘void *’ but argument is of
type ‘const char *’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Input drivers may use valuator masks for internal state. Having all the
valuator_mask_* functions available will help.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Bump ABI_XINPUT_VERSION minor.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Assume that a mode can be used in either landscape or portrait
orientation. I suppose the correct thing to do would be to
collect all the supported rotations from the CRTCs that can be used
with a specific output, but that information doesn't seem to be
readily available when these checks are done. So just assume that
either orientation is fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the drawable size doesn't match the pixmap size page flipping should
not be allowed.
If the window is larger than the pixmap, page flipping might need to
reposition the CRTC somewhere in the middle of the pixmap. I didn't
spot any code that would handle that at least in the intel driver.
Also the root pixmap could then move to some negative screen
coordinates. Not sure if all bits of code could handle that. Perhaps
when composite is enabled screen_x/y would make it work, but without
composite there's no way that it would work AFAICS.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
An interface is provided for figuring out the PID and process name of
a client. Make some existing functionality from SELinux and IA
extensions available for general use.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The DDC1 and int10 code are blocking SIGIO to get some assurance that
their usleep() calls take as long as they expect. That's a good start
but you really want to be blocking more than just SIGIO, SIGALRM too at
minimum.
At this point, except for SIGIO handler setup itself, BlockSIGIO really
means "block input events".
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Back when we had RAC this was a vaguely meaningful thing. Since then
it's been a glorified (and confusing) wrapper around xf86BlockSIGIO.
Note that the APM and VT switch code are unusual relative to other code
that cares about SIGIO state. Most callers push a SIGIO disable to
create a critical section for the duration of the caller's stack frame,
but those two effectively disable SIGIO after their return and re-enable
on their next entry.
Reviewed-by: Tiago Vignatti <tigo.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Enter was changing server operating state, Leave wasn't. Which was
wholly redundant, since all callers of Enter would immediately change
the operating state to exactly what Enter had just done.
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has never been buildable in any modular server release.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
What is this, I don't even.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Like some other LPL panels, this one reports the vertical size in cm rather
than mm.
Patch taken from Launchpad bug #380009 <https://launchpad.net/bugs/380009>
X.Org Bug 28414 <https://bugs.freedesktop.org/show_bug.cgi?id=28414>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
https://bugs.freedesktop.org/show_bug.cgi?id=32436
Fix typo introduced in 2416255f7e that breaks builds when
configured --enable-install-libxf86config
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Simon Thum <simon.thum@gmx.de>
https://bugs.freedesktop.org/show_bug.cgi?id=21827
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: David Barksdale <david.barksdale@adcedosolutions.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Use the util-macros AM Conditionals to control generation of developers
documents. This is used throughout xorg modules.
The doxygen generated docs are now also managed by --enable-devel-docs.
Remove --enable-builddocs as this was last use for BUILDDOCS
*** From the RELEASE NOTES ***
New configure options for documentation in modules
--------------------------------------------------
As many more modules now contain documentation to be converted from DocBook XML to text,
HTML, PostScript, and/or PDF formats, new standard options have been added to the configure
macros to control the build of these in the modules.
--with-xmlto=yes|no
Enables or disables use of the xmlto [https://fedorahosted.org/
xmlto/] command to translate DocBook XML to other formats.
All DocBook XML conversions require use of this command.
--with-fop=yes|no
Enables or disables use of the Apache fop [http://
xmlgraphics.apache.org/fop/] command to translate DocBook
XML to PostScript and PDF formats.
--enable-docs=yes|no
Enables or disables the build and installation of all
documentation except traditional man pages or those covered
by the --enable-devel-docs and --enable-specs options.
--enable-devel-docs=yes|no
Enables or disables the build and installation of documentation
for developers of the X.Org software modules.
--enable-specs=yes|no
Enables or disables the build and installation of the formal
specification documents for protocols and APIs.
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The makefile can be simplyfied as Automake handle this automatically.
All directories in SUBDIRS are visited for dist purposes.
www.gnu.org/software/automake/manual/automake.html#SUBDIRS-vs-DIST_005fSUBDIRS
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
After collecting the driver's default options, report the list of options
set for the device before calling PreInit(). This helps with debugging those
cases where options are not merged correctly.
xf86OptionListReport reports with verbosity 5, higher than the default
verbosity so this won't generate logspam in the default case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Current order causes the user-configured option list to be overwritten with
the default list supplied by the driver. Swap around so we overwrite the
driver's default values instead.
This only affected options supplied by the driver such as XkbLayout in the
case of evdev.
Reported-by: Sebastian Glita <glseba@yahoo.com>
Reported-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Sebastian Glita <glseba@yahoo.com>
If a device doesn't send valuators, don't try to move its position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The CoreAudio path uses deprecated API and has reported crashes that
aren't worth fixing (4e8bf12b13 fixed
one and introduced another). NSBeep() does the job just fine.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Requires linking xprintf.c into libxf86config for those who build it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Provides a portable implementation of this common allocating sprintf()
API found in many, but not yet all, of the platforms we support.
If the platform provides vasprintf() we simply wrap it, otherwise we
implement it - either way callers can use it regardless of platform.
Since not all platforms guarantee to NULL out the return pointer on
failure, we don't either, and require callers to check the return
value for -1.
The old Xprintf() API is deprecated, but left for compatibility for now.
The new API is added in a new header so that it can be used in parts of
the server such as hw/xfree86/parser that don't include all the server
headers.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This patch has been prepared with the following Coccinelle semantic patch:
@@
expression a, b, c, d;
identifier r;
type t;
@@
-r = (t) SecurityLookupIDByClass(a, b, c, d);
+dixLookupResourceByClass((pointer*) &r, b, c, a, d);
The only occurrence not matching directly was processed after separating
declaration of pXinDraw and call to SecurityLookupIDByClass().
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
These occurrences are a bit harder to catch through a semantic patch,
so process them “manually”.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
This patch has been prepared with the following Coccinelle semantic patch:
@@
expression a, b, c, d;
identifier r;
@@
-r = SecurityLookupIDByType(a, b, c, d);
+dixLookupResourceByType((pointer*) &r, b, c, a, d);
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
These occurrences are a bit harder to catch through a semantic patch,
so process them “manually”.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
If glxproxy needs symbols which aren't pulled in by dmx itself, glxproxy
fails to link because of undefined references.
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 606e079cc4 moved the visual
field in WindowOptRec, breaking the extension module ABI.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides for separate sizes for the screen scanout and rendering
buffer and the application-visible screen size.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Remove some extra ref counting inside hw/xfree86/modes
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This adds new driver hooks to allocate scanout pixmaps and
changes the mode setting APIs to pass the new scanout pixmaps
along from DIX. DIX is responsible for reference counting the pixmaps
by tracking them through RRCrtcNotify.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This provides a driver hook which can either completely replace, or
just validate the parameters for, the RRSetCrtcConfigs request.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This provides a driver-independent implementation of the
RRSetCrtcConfigs API by simply using the existing interfaces.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This implements sprite position transformations. Sprite image
transforms are passed all the way to the DDX layer, but the images are
not yet manipulated before being passed to the drivers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
xf86CrtcSetModeTransform was starting to get ridiculous with 6
arguments, this change has it take a single structure that contains
all of those values along with a set of flags that says which have
changed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Initial server side implementation of fence sync
objects. Allows creation, management, and state
queries of binary state objects. Currently they
are not very useful as there is no way to wait for
them efficiently.
The basic trigger operation added here triggers
relative to a given X screen's rendering operations.
To perform this operation, fence sync objects must
be tied to a screen. As Aaron Plattner pointed out,
screens are identified but a drawable in X protocol,
so a drawable argument is included in
XSyncCreateFence(). The screen also could have been
specified as part of the trigger operation. However,
it is also desireable to associate a screen with
fence sync objects at creation time so that the
associated screen's driver can allocate any HW-
specific resources needed by the fence object up
front.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
-Add fence sync objects
-Add fence sync devPrivates
-Add a X sync module screen private
-Add wrappable functions to create and destroy
fence sync objects
-Give fence sync objects wrappable functions to
trigger, test, and reset their 'triggered' value.
-Give fence sync objects wrappable functions to
notify driver when adding/removing triggers to/
from the sync object.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Single allocation point for input devices, most notably a single point to
reset default values.
Without this patch, the file descriptor default was -1 for hotplugged
devices and 0 for config devices. Drivers that don't overwrite the default
themselves would thus fail if configured in the xorg.conf.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Options set in the configuration file were unconditionally overwritten by
the server. Merge the already existing options and the new options together
instead of just overwriting ones.
Introduced in commit 2199842ed5
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Thu Sep 2 10:52:54 2010 +1000
xfree86: remove extraOptions field from IDevRec.
X.Org Bug 32115 <http://bugs.freedesktop.org/show_bug.cgi?id=32115>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: David Ronis <ronis@ronispc.chem.mcgill.ca>
Some devices should be initialised as floating from the start (e.g.
Joysticks and accelerometers benefit from this). Currently users use the
"SendCoreEvents" "off" flag for this, which isn't the most appropriate
naming.
Add an option "Floating", deprecate the others. Still parsed and handled by
the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This just fixes the regression whereby we couldn't switch between the legacy
fullscreen mode and rootless on multi-monitor configurations. This was
happening because ref wasn't being set in these cases (since we don't ever
actually change CG modes), so we failed a CFEqual. Setting the references
fixes this regression and places us one step closer to more mode RandR
mode switching in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
screenInfo.numScreens is not a valid screen number, they go from 0 to
numScreens - 1.
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
screenInfo.numScreens is not a valid screen number, they go from 0 to
numScreens - 1.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
15ac25627e removed the "/" from the sprintf strings,
but failed to remove the extra byte allocated for the '/'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
No point calling the no-fail-alloc if you check for failure and your
only caller checks for failure.
No point calling calloc to zero fill memory you're about to memcpy over.
In the unlikely event of a loss of memory allocation, drop your previous
allocations before returning to others.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
sun_init.c: In function `xf86OpenConsole':
sun_init.c:99: warning: cast does not match function type
sun_init.c:74: warning: unused variable `FreeVTslot'
sun_init.c: In function `xf86UseMsg':
sun_init.c:417: warning: old-style parameter declaration
sun_vid.c: In function `solUnMapVidMem':
sun_vid.c:162: warning: long unsigned int format, pointer arg (arg 6)
sun_vid.c: In function `xf86ReadBIOS':
sun_vid.c:217: warning: long unsigned int format, pointer arg (arg 5)
sun_vid.c:217: warning: long unsigned int format, int arg (arg 6)
sun_agp.c: In function `xf86EnableAGP':
sun_agp.c:321: warning: unsigned int format, CARD32 arg (arg 4)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
static function only called from the matchDriverFromFiles function
that's inside #ifdef __linux__ section
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only one (marginal) driver was using it, and it's been fixed to just
implement it directly.
v2: Also fix sdksyms.sh (spotted by Jesse Adkins)
v3: Also fix DESIGN.xml (spotted bu Julien Cristau)
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Eliminate the unused dither field, move filter and stateChanges into the
bitfield, and reorder elements to pack holes on LP64.
sizeof(PictureRec) ILP32 LP64
before: 84 152
after: 72 120
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When RandR 1.2's transformation code is enabled, it rotates the cursor
image so that it appears upright on a rotated screen. This code
completely mangles 2-color cursors on hardware where the the mask and
source images are not interleaved due to two problems:
1. stride is calculated as (width / 4) rather than (width / 8), so the
expression (y * stride) skips two lines instead of one for every
time y is incremented.
2. cursor_bitpos ignores the 'mask' parameter if the hardware doesn't
specify any of the HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_* flags.
To fix this, refactor the code to pass the whole xf86CursorInfoPtr
through to cursor_bitpos and compute the correct stride there based on
the flags. If none of the SOURCE_MASK_INTERLEAVE flags are set, use
the total cursor size to move the 'image' variable into the mask part
of the image before computing the desired byte pointer.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
This makes more things fatal than were fatal before, but that's correct;
if you need the VT, then failing to get it on regeneration means things
are about to go very very badly.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nothing's using it, the SysV derivatives we support have their own
custom versions.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Never implemented in any open source driver. The implementation
assumed explicit DDX driver knowledge of how the client-side driver
worked, since at the time the server's GL renderer was not a DRI driver.
But now, it is, so any implementation of these should be done with
additional DRI driver API, like the swap control extension.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reput all ports when the display mode or panning has been changed by
RandR code. This makes the overlays appear in the correct position
on the screen.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Add a new hook ModeSet that will be called after display mode is
changed, or after the display has been panned.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Pass all of the src/dst coordinates to ReputImage so that drivers
don't necessarily have to do double bookkeeping.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Document the fact that ReputImage is used for stills as well as images.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
