Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
This is only relevant to pre-NT versions of Windows, which are all EOL.
Also, it's in the wrong place now as framebuffer can get resized.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Fortunately, these swapped constants are benign as they have the same
value, 0
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Don't turn off -multiplemonitors when all monitors don't have the
same pixel format and when using shadow GDI engine, just warn that
performance may be degraded
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
When RANDR resizing is enabled, generate an internal RANDR change when
WM_DISPLAYCHANGE occurs in rootless modes for screens which occupy an
entire monitor or the virtual desktop.
Store the monitor number and use that to handle WM_DISPLAYCHANGE for a
screen specified with '-screen @monitor'
In rooted mode, WM_DISPLAYCHANGE isn't relevant (except where display
depth changes may cause problems). (A maximized screen window will get
WM_SIZE to adjust it to the new monitor size)
In rooted fullscreen mode, WM_DISPLAYCHANGE shouldn't be seen, as we
have the resolution we have selected for the fullscreen session)
(Could client randr requests be handled in fullscreen to cause a change
of the fullscreen resolution? )
Don't bother do a RANDR resize if the dimensions aren't actually changing
when WM_DISPLAYCHANGE is sent (should handle WM_DISPLAYCHANGE to size 0x0
that the intel driver seems to like to send)
Various debug output improvements
Also, remove the note that XWin can't handle display mode changes from
the man page
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
To avoid recursion, WM_SIZE requests shouldn't generate XRANDR requests
when no change is neeeded.
We do the actual resize on WM_EXITSIZEMOVE, as resizing occurs in
a modal loop, to avoid a backlog of resize events building up as
the X server doesn't get a change to process anything until the resize
is completed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Implement framebuffer resizing in RANDR extension:
Resize the frame buffer, the screen's root window and the native window
containing the root window image.
Correctly allow for decorations in new native window size when resizing native window
to fit the new framebuffer size with AdjustWindowRectEx()
Update physical size info for a screen when it is changed by RANDR
Forbid client-requested RANDR changes in fullscreen and rootless modes
Only resize window on an external RandR request, to avoid recursing on
a WM_SIZE requested resize.
Also, add prototypes for winRandRInit() and winDoRandRScreenSetSize() to header file
Also, update the author list and copyright for winrandr.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Add -resize command line option to configure how native window sizing frame
is used.
In additions to the existing fixed and scrollbars modes, add a new mode to
allow framebuffer to be resized using native window frame
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Move QueryMonitor() out of windprocarg.c into a new file, winmonitors.c,
as we use to use it from other places as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Remove an attempt at the rather difficult optimization of detecting
if WM_DISPLAYCHANGE affects any of the monitors which intersect the
native window for the X screen.
We'll always act as if it does, which it probably usually the case.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
(This stored calculation was wrong if -dpi came after -screen on the command
line, anyhow)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Refactor the drawing engines so we can explicitly allocate and release the framebuffer for a screen
Move the setting of dwPaddedWidth into the DDNL engine, so it is updated when the framebuffer changes size
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Some trivial build fixes required
Also fill out all function pointers for primaryfb engine
Also tidy up the man page section describing drawing engines.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Following the convention makes it easier to locate man pages,
user's or developer's documentation and specifications.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Makefile.am: there are only 4 string substitutions to be done in this file.
SED is much simpler than the C pre processor which adds its own
strings which must be substituted by sed, still.
xorgconf.cpp: replaced __xconfigfile__ with xorg.conf as this file name
is hard coded in the xserver configuration and cannot change.
Replace XCOMM with # permanently.
Delete cpprules.in as it isn't used anywhere else. Should one need
cpprules for real cpp work, there is one in Xquartz from which the
the old man pages code have been stripped.
Fix trailing spaces.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create a manpages.am makefile snippet in the root dir.
Each man page makefile includes manpages.am.
Now all man pages in xserver are generated the same way
using the same method as all of other xorg modules.
All ".man.pre" files in git are ".man" now.
Links are no longer created between different file types.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use standard directory and makefile.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Now can be built easily on any platform in the man directory
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is dead code which will not be used in the future.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man)
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
In order to use libxf86config in a shared library, all the code must be
compiled with -fPIC. Add proper PIC support for libxf86config by turning
it into a libtool library. However, since we don't want to guarantee API
or ABI stability, make sure it's only built static.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
The extra SourceValidate calls from damageCopyArea and damageCopyPlane
can be removed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
cc2c73ddcb4370a7c3ad439cda4da825156c26c9's three-cent titanium tax
doesn't go too far enough. Fix the rest of the call and jmp
instructions to handle the data prefix correctly.
Reference: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 2A: Instruction Set Reference, A-M
http://www.intel.com/Assets/PDF/manual/253666.pdf
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Cast it to a char *, mimicking the return immediately below it.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
lnx_agp.c: In function ‘xf86DeallocateGARTMemory’:
lnx_agp.c:267: warning: cast to pointer from integer of different size
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
render2.c: In function ‘__glXDisp_Map2d’:
render2.c:127: warning: ‘u1’ may be used uninitialized in this function
render2.c: In function ‘__glXDisp_Map1d’:
render2.c:90: warning: ‘u1’ may be used uninitialized in this function
Remove unnecessary test, and change memcpy to memmove as all users were
doing overlapping copies.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xcmisc.c:202: warning: no previous prototype for ‘XCMiscExtensionInit’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
dri.c: In function ‘DRIScreenInit’:
dri.c:434: warning: cast from pointer to integer of different size
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
loadmod.c: In function ‘FreeSubdirs’:
loadmod.c:377: warning: passing argument 1 of ‘free’ discards qualifiers
from pointer target type
/usr/include/stdlib.h:488: note: expected ‘void *’ but argument is of
type ‘const char *’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86AutoConfig.c: In function ‘FreeList’:
xf86AutoConfig.c:123: warning: passing argument 1 of ‘free’ discards
qualifiers from pointer target type
/usr/include/stdlib.h:488: note: expected ‘void *’ but argument is of
type ‘const char *’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Input drivers may use valuator masks for internal state. Having all the
valuator_mask_* functions available will help.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Bump ABI_XINPUT_VERSION minor.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Assume that a mode can be used in either landscape or portrait
orientation. I suppose the correct thing to do would be to
collect all the supported rotations from the CRTCs that can be used
with a specific output, but that information doesn't seem to be
readily available when these checks are done. So just assume that
either orientation is fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the drawable size doesn't match the pixmap size page flipping should
not be allowed.
If the window is larger than the pixmap, page flipping might need to
reposition the CRTC somewhere in the middle of the pixmap. I didn't
spot any code that would handle that at least in the intel driver.
Also the root pixmap could then move to some negative screen
coordinates. Not sure if all bits of code could handle that. Perhaps
when composite is enabled screen_x/y would make it work, but without
composite there's no way that it would work AFAICS.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
An interface is provided for figuring out the PID and process name of
a client. Make some existing functionality from SELinux and IA
extensions available for general use.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The DDC1 and int10 code are blocking SIGIO to get some assurance that
their usleep() calls take as long as they expect. That's a good start
but you really want to be blocking more than just SIGIO, SIGALRM too at
minimum.
At this point, except for SIGIO handler setup itself, BlockSIGIO really
means "block input events".
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Back when we had RAC this was a vaguely meaningful thing. Since then
it's been a glorified (and confusing) wrapper around xf86BlockSIGIO.
Note that the APM and VT switch code are unusual relative to other code
that cares about SIGIO state. Most callers push a SIGIO disable to
create a critical section for the duration of the caller's stack frame,
but those two effectively disable SIGIO after their return and re-enable
on their next entry.
Reviewed-by: Tiago Vignatti <tigo.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Enter was changing server operating state, Leave wasn't. Which was
wholly redundant, since all callers of Enter would immediately change
the operating state to exactly what Enter had just done.
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has never been buildable in any modular server release.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
What is this, I don't even.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Like some other LPL panels, this one reports the vertical size in cm rather
than mm.
Patch taken from Launchpad bug #380009 <https://launchpad.net/bugs/380009>
X.Org Bug 28414 <https://bugs.freedesktop.org/show_bug.cgi?id=28414>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
https://bugs.freedesktop.org/show_bug.cgi?id=32436
Fix typo introduced in 2416255f7e that breaks builds when
configured --enable-install-libxf86config
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Simon Thum <simon.thum@gmx.de>
https://bugs.freedesktop.org/show_bug.cgi?id=21827
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: David Barksdale <david.barksdale@adcedosolutions.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Use the util-macros AM Conditionals to control generation of developers
documents. This is used throughout xorg modules.
The doxygen generated docs are now also managed by --enable-devel-docs.
Remove --enable-builddocs as this was last use for BUILDDOCS
*** From the RELEASE NOTES ***
New configure options for documentation in modules
--------------------------------------------------
As many more modules now contain documentation to be converted from DocBook XML to text,
HTML, PostScript, and/or PDF formats, new standard options have been added to the configure
macros to control the build of these in the modules.
--with-xmlto=yes|no
Enables or disables use of the xmlto [https://fedorahosted.org/
xmlto/] command to translate DocBook XML to other formats.
All DocBook XML conversions require use of this command.
--with-fop=yes|no
Enables or disables use of the Apache fop [http://
xmlgraphics.apache.org/fop/] command to translate DocBook
XML to PostScript and PDF formats.
--enable-docs=yes|no
Enables or disables the build and installation of all
documentation except traditional man pages or those covered
by the --enable-devel-docs and --enable-specs options.
--enable-devel-docs=yes|no
Enables or disables the build and installation of documentation
for developers of the X.Org software modules.
--enable-specs=yes|no
Enables or disables the build and installation of the formal
specification documents for protocols and APIs.
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The makefile can be simplyfied as Automake handle this automatically.
All directories in SUBDIRS are visited for dist purposes.
www.gnu.org/software/automake/manual/automake.html#SUBDIRS-vs-DIST_005fSUBDIRS
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
After collecting the driver's default options, report the list of options
set for the device before calling PreInit(). This helps with debugging those
cases where options are not merged correctly.
xf86OptionListReport reports with verbosity 5, higher than the default
verbosity so this won't generate logspam in the default case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Current order causes the user-configured option list to be overwritten with
the default list supplied by the driver. Swap around so we overwrite the
driver's default values instead.
This only affected options supplied by the driver such as XkbLayout in the
case of evdev.
Reported-by: Sebastian Glita <glseba@yahoo.com>
Reported-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Sebastian Glita <glseba@yahoo.com>
If a device doesn't send valuators, don't try to move its position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The CoreAudio path uses deprecated API and has reported crashes that
aren't worth fixing (4e8bf12b13 fixed
one and introduced another). NSBeep() does the job just fine.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Requires linking xprintf.c into libxf86config for those who build it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Provides a portable implementation of this common allocating sprintf()
API found in many, but not yet all, of the platforms we support.
If the platform provides vasprintf() we simply wrap it, otherwise we
implement it - either way callers can use it regardless of platform.
Since not all platforms guarantee to NULL out the return pointer on
failure, we don't either, and require callers to check the return
value for -1.
The old Xprintf() API is deprecated, but left for compatibility for now.
The new API is added in a new header so that it can be used in parts of
the server such as hw/xfree86/parser that don't include all the server
headers.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This patch has been prepared with the following Coccinelle semantic patch:
@@
expression a, b, c, d;
identifier r;
type t;
@@
-r = (t) SecurityLookupIDByClass(a, b, c, d);
+dixLookupResourceByClass((pointer*) &r, b, c, a, d);
The only occurrence not matching directly was processed after separating
declaration of pXinDraw and call to SecurityLookupIDByClass().
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
These occurrences are a bit harder to catch through a semantic patch,
so process them “manually”.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
This patch has been prepared with the following Coccinelle semantic patch:
@@
expression a, b, c, d;
identifier r;
@@
-r = SecurityLookupIDByType(a, b, c, d);
+dixLookupResourceByType((pointer*) &r, b, c, a, d);
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
These occurrences are a bit harder to catch through a semantic patch,
so process them “manually”.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
If glxproxy needs symbols which aren't pulled in by dmx itself, glxproxy
fails to link because of undefined references.
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 606e079cc4 moved the visual
field in WindowOptRec, breaking the extension module ABI.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides for separate sizes for the screen scanout and rendering
buffer and the application-visible screen size.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Remove some extra ref counting inside hw/xfree86/modes
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This adds new driver hooks to allocate scanout pixmaps and
changes the mode setting APIs to pass the new scanout pixmaps
along from DIX. DIX is responsible for reference counting the pixmaps
by tracking them through RRCrtcNotify.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This provides a driver hook which can either completely replace, or
just validate the parameters for, the RRSetCrtcConfigs request.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This provides a driver-independent implementation of the
RRSetCrtcConfigs API by simply using the existing interfaces.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This implements sprite position transformations. Sprite image
transforms are passed all the way to the DDX layer, but the images are
not yet manipulated before being passed to the drivers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
xf86CrtcSetModeTransform was starting to get ridiculous with 6
arguments, this change has it take a single structure that contains
all of those values along with a set of flags that says which have
changed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Initial server side implementation of fence sync
objects. Allows creation, management, and state
queries of binary state objects. Currently they
are not very useful as there is no way to wait for
them efficiently.
The basic trigger operation added here triggers
relative to a given X screen's rendering operations.
To perform this operation, fence sync objects must
be tied to a screen. As Aaron Plattner pointed out,
screens are identified but a drawable in X protocol,
so a drawable argument is included in
XSyncCreateFence(). The screen also could have been
specified as part of the trigger operation. However,
it is also desireable to associate a screen with
fence sync objects at creation time so that the
associated screen's driver can allocate any HW-
specific resources needed by the fence object up
front.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
-Add fence sync objects
-Add fence sync devPrivates
-Add a X sync module screen private
-Add wrappable functions to create and destroy
fence sync objects
-Give fence sync objects wrappable functions to
trigger, test, and reset their 'triggered' value.
-Give fence sync objects wrappable functions to
notify driver when adding/removing triggers to/
from the sync object.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Single allocation point for input devices, most notably a single point to
reset default values.
Without this patch, the file descriptor default was -1 for hotplugged
devices and 0 for config devices. Drivers that don't overwrite the default
themselves would thus fail if configured in the xorg.conf.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Options set in the configuration file were unconditionally overwritten by
the server. Merge the already existing options and the new options together
instead of just overwriting ones.
Introduced in commit 2199842ed5
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Thu Sep 2 10:52:54 2010 +1000
xfree86: remove extraOptions field from IDevRec.
X.Org Bug 32115 <http://bugs.freedesktop.org/show_bug.cgi?id=32115>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: David Ronis <ronis@ronispc.chem.mcgill.ca>
Some devices should be initialised as floating from the start (e.g.
Joysticks and accelerometers benefit from this). Currently users use the
"SendCoreEvents" "off" flag for this, which isn't the most appropriate
naming.
Add an option "Floating", deprecate the others. Still parsed and handled by
the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This just fixes the regression whereby we couldn't switch between the legacy
fullscreen mode and rootless on multi-monitor configurations. This was
happening because ref wasn't being set in these cases (since we don't ever
actually change CG modes), so we failed a CFEqual. Setting the references
fixes this regression and places us one step closer to more mode RandR
mode switching in multi-monitor configurations.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
screenInfo.numScreens is not a valid screen number, they go from 0 to
numScreens - 1.
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
screenInfo.numScreens is not a valid screen number, they go from 0 to
numScreens - 1.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
15ac25627e removed the "/" from the sprintf strings,
but failed to remove the extra byte allocated for the '/'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
No point calling the no-fail-alloc if you check for failure and your
only caller checks for failure.
No point calling calloc to zero fill memory you're about to memcpy over.
In the unlikely event of a loss of memory allocation, drop your previous
allocations before returning to others.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
sun_init.c: In function `xf86OpenConsole':
sun_init.c:99: warning: cast does not match function type
sun_init.c:74: warning: unused variable `FreeVTslot'
sun_init.c: In function `xf86UseMsg':
sun_init.c:417: warning: old-style parameter declaration
sun_vid.c: In function `solUnMapVidMem':
sun_vid.c:162: warning: long unsigned int format, pointer arg (arg 6)
sun_vid.c: In function `xf86ReadBIOS':
sun_vid.c:217: warning: long unsigned int format, pointer arg (arg 5)
sun_vid.c:217: warning: long unsigned int format, int arg (arg 6)
sun_agp.c: In function `xf86EnableAGP':
sun_agp.c:321: warning: unsigned int format, CARD32 arg (arg 4)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
static function only called from the matchDriverFromFiles function
that's inside #ifdef __linux__ section
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only one (marginal) driver was using it, and it's been fixed to just
implement it directly.
v2: Also fix sdksyms.sh (spotted by Jesse Adkins)
v3: Also fix DESIGN.xml (spotted bu Julien Cristau)
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Eliminate the unused dither field, move filter and stateChanges into the
bitfield, and reorder elements to pack holes on LP64.
sizeof(PictureRec) ILP32 LP64
before: 84 152
after: 72 120
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When RandR 1.2's transformation code is enabled, it rotates the cursor
image so that it appears upright on a rotated screen. This code
completely mangles 2-color cursors on hardware where the the mask and
source images are not interleaved due to two problems:
1. stride is calculated as (width / 4) rather than (width / 8), so the
expression (y * stride) skips two lines instead of one for every
time y is incremented.
2. cursor_bitpos ignores the 'mask' parameter if the hardware doesn't
specify any of the HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_* flags.
To fix this, refactor the code to pass the whole xf86CursorInfoPtr
through to cursor_bitpos and compute the correct stride there based on
the flags. If none of the SOURCE_MASK_INTERLEAVE flags are set, use
the total cursor size to move the 'image' variable into the mask part
of the image before computing the desired byte pointer.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
This makes more things fatal than were fatal before, but that's correct;
if you need the VT, then failing to get it on regeneration means things
are about to go very very badly.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nothing's using it, the SysV derivatives we support have their own
custom versions.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Never implemented in any open source driver. The implementation
assumed explicit DDX driver knowledge of how the client-side driver
worked, since at the time the server's GL renderer was not a DRI driver.
But now, it is, so any implementation of these should be done with
additional DRI driver API, like the swap control extension.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reput all ports when the display mode or panning has been changed by
RandR code. This makes the overlays appear in the correct position
on the screen.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Add a new hook ModeSet that will be called after display mode is
changed, or after the display has been panned.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Pass all of the src/dst coordinates to ReputImage so that drivers
don't necessarily have to do double bookkeeping.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Document the fact that ReputImage is used for stills as well as images.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
PutImage/PutStill respect the GC clip, however ReputImage does not.
PutImage/PutStill are supposed to be oneshot operations so ReputImage
should never expand the area covered by the clip, instead it should
only shrink if the window clip shrinks. So commandeer clientClip
into use by ReputImage and initially make it a copy of the original
GC composite clip. Whenever ReputImage needs reclipping update
clientClip with the newly calculated composite clip.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
clipOrg never changes except when clientClip changes, so instead of
keeping copies of both originals translate clientClip by clipOrg
immediately and just keep the translated clientClip.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Also reput PutVideo/GetVideo ports in AdjustFrame. This makes the
overlay track the screen panning instead of staying stationary in the
wrong place.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Nothing should change in AdjustFrame that would need the composite clip
to be recomputed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
When ClipNotify gets called for a visible window, reput instead of
stopping the port. This eliminates nasty overlay flickering that
happens during clip changes.
If the window is invisible or if ReputImage isn't supported stop
and remove the port from the window as was done before.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Modify xf86XVReputOrStopPort() to allow stopping of all types of ports.
Will be useful later.
No functional change.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
WinPriv->PortRec should never be NULL as WinPriv itself would be removed
from the list when the port is removed from the window.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
A different approach which requires less variables setting
and internal knowledge of the reused code.
Changing from "install" to "not install" is very easy now.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Relative paths don't always work in distcheck when srcdir not = builddir
include $(top_srcdir)/doc/xml/xmlrules.in
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes a gamma issue on vt switch observed with KDM. VT switching away
and back would result in a black screen. Avoid this by storing the current
gamma information on init.
https://bugzilla.redhat.com/show_bug.cgi?id=533217
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When entering the VT, re-apply the saved gamma settings for each screen.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The version check is hackish, and I highly doubt anyone using this code is on
a version of OS X that predates this support (10.2 has support for it).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
If the vt gets a vhangup from under us, then the tty will appear ready
in select(), but trying to tcflush() it will return -EIO, so we'll spin
around at 100% CPU for no reason. Notice this condition and unregister
the handler if it happens.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
That helps us get rid of:
| CC xf86Config.lo
| xf86Config.c: In function ‘T.174’:
| xf86Config.c:1228: warning: ‘Pointer$module’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$module’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$drv’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$drv’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$type_name’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$type_name’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$private’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$private’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$dev’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$dev’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$fd’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$fd’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$set_device_valuators’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$set_device_valuators’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$switch_mode’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$switch_mode’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$control_proc’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$control_proc’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$read_input’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$read_input’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$device_control’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$device_control’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$flags’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$flags’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$next’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$next’ was declared here
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix compilation after commit 675f4a8525
converts winmouse.c to the new ValuatorMask input API, but doesn't
include the required header inpututil.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a more accurate name for the actual functionality than
allowEmptyInput. Historically, allowEmptyInput has allowed the server to
start with no input devices. Since 1.4 and the introduction of VCP and VCK,
there are always two input devices present.
allowEmptyInput was changed in behaviour to essentially "ignore xorg.conf
devices or not", auto-adding the built-in devices if disabled.
Rename to forceInputDevices, because that's essentially what it does. When
disabled (i.e. when hotplugging is enabled), it disables all
mouse/kbd/vmmouse devices configured in the xorg.conf file.
When enabled, it forces the traditional behaviour for input devices:
- use input devices configured in the server layout
- if none are configured, use the first pointer and the first keyboard
device in the xorg.conf
- if none are configured, create the default pointer/keyboard devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Not used in the initial import, and also not documented.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
An estimated 100% (rounded down to the nearest percent) of the people who
have this in their configuration don't actually know what this option does.
Protect the users from themselves.
IIRC, AEI on was useful for some time between 1.4 and 1.5 and never since.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
In all these cases, any rendering implied by this damage has already
occurred, and we want to get the damage out to the client. Some of
the DamageRegionAppend calls were explicitly telling damage to flush
the reportAfter damage out, but not all.
Bug #30260. Fixes the compiz wallpaper plugin with client damage
changed to reportAfter.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=24348
Before (data flag ignored -> broken):
66 DATA:
e944f1 JMP 1ff6
After (fixed):
66 DATA:
e944f1ffff JMP 00001ff8
This subtle difference in the length of decoded instruction meant
that the VBE call jumped to the routine setting AX=0x14F (VBE Failed)
instead of the routine that set AX=0x4F (VBE success).
The ability to run the same code in vm86 significantly aided the
debugging of this issue. Those X.org developers who would like to drop
vm86 better take special care towards _all_ vesa bugs, as those will
expose further issues.
Patch applies easily to even xserver 1.4.2.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Tested-by: Luc Verhaegen <libv@skynet.be>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Disable timer/keyboard trapping on GNU/Hurd for now
Trapping disabled for now, as some VBIOSes (mga-g450 notably) use these
ports, and the int10 wrapper is not emulating them.
It's effectively what happens in the Linux variant too, as iopl() is used there,
making the ioperm() meaningless.
Signed-off-by: Olaf Buddenhagen <antrik@users.sf.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DDX driver may implement schedule swap without GetMSC. In that case we
can't call GetMSC in DRI2SwapBuffers.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
CC: Keith Packard <keithp@keithp.com>
CC: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL) {
- free(E);
- }
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E)
- free(E);
+ free(E);
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
- if (E != NULL) {
- free(E);
(
- E = NULL;
|
- E = 0;
)
- }
+ free(E);
+ E = NULL;
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
../../../../hw/xfree86/common/xf86Config.c: In function 'configDRI':
../../../../hw/xfree86/common/xf86Config.c:2213:9: warning: unused variable
'i'
Introduced in 788bfbf18a
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
../../../../hw/xfree86/common/xf86Config.c: In function
'fixup_video_driver_list':
../../../../hw/xfree86/common/xf86Config.c:507:19: warning: unused variable
'atimisc'
../../../../hw/xfree86/common/xf86Config.c:507:12: warning: unused variable
'ati'
Introduced in 52577ae8ee.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The functions in these files have not been used since trap
rasterization was moved to pixman. They survived until now to preserve
the server abi.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Søren Sandmann <ssp@redhat.com>
Some drivers, most notably the mouse driver need this and reimplementing on
the driver side doesn't make sense.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix Xserver on GNU/Hurd into using the "mem" device instead of
the deprecated "iopl" device.
Reviewed-by: Olaf Buddenhagen <antrik@users.sf.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
We have per-axis mode now. For those bits that still need it (XI 1.x),
assume that the first axis holds the device's mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Relative is defined as 0, so change the condition to be more obvious.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
If ts_open() fails and return NULL, then next call to ts_fd()
segfaults because of NULL dereference. There is no need to
check output of ts_fd() as ts_open() did this internally.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
EventToCore as of the commit below won't generate core motion events if the
valuator mask for x/y isn't set. For DGA, we work around this check by
forcibly setting the mask in the event we pass down.
commit de8be07cc0
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Tue Aug 17 12:08:52 2010 +1000
dix: don't create core motion events for non-x/y valuators.
X.Org Bug 30267 <http://bugs.freedesktop.org/show_bug.cgi?id=30267>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Andrew Randrianasulu <randrik@mail.ru>
Tested-by: Andy Furniss
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
For the global variables defined in winglobals.c, remove duplicate extern
declarations from the beginning of various .c files, and move most of them
into a new header file, winglobals.h
Leave some clipboard related variables alone for the moment, they need treating
more carefully, to avoid mixing client and server type definitions.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Make g_hmodCommonControls static, it's only used in InitOutput.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Add winReleaseDDProcAddresses() for releasing the direct draw module
handle, so g_hmodDirectDraw can be made static
Remove unneeded duplicate extern definitions of g_fpDirectDrawCreate
and g_fpDirectDrawCreateClipper, and move the definition from
winglobals.c to winengine.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Make g_hhookKeyboardLL static, it's only used in winkeyhook.c
Also remove unused externs
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
I'm pretty sure the compiler has a better idea how to optimize this
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winkeybd.c: In function ‘winSendKeyEvent’:
winkeybd.c:489: warning: passing argument 2 of ‘mieqEnqueue’ from incompatible pointer type
winmouse.c: In function ‘winMouseButtonsSendEvent’:
winmouse.c:247: warning: passing argument 2 of ‘mieqEnqueue’ from incompatible pointer type
winmouse.c: In function ‘winEnqueueMotion’:
winmouse.c:380: warning: passing argument 2 of ‘mieqEnqueue’ from incompatible pointer type
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
return statement with an expression in a function whose return-type is void
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Also remove the out-of-date listing of keyboard layout IDs and which ones
have known mappings
XXX: layout zh_TW doesn't exist anymore
This patch brought to you by C-u M-x align-regexp
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winmultiwindowwm.c: In function ‘winApplyHints’:
winmultiwindowwm.c:1587: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winwindowswm.c: In function ‘ProcWindowsWMFrameSetTitle’:
winwindowswm.c:516: warning: pointer targets in passing argument 1 of ‘strncpy’ differ in signedness
winwindowswm.c:516: warning: pointer targets in passing argument 2 of ‘strncpy’ differ in signedness
winwindowswm.c:528: warning: pointer targets in passing argument 2 of ‘SetWindowTextA’ differ in signedness
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
windialogs.c: In function ‘winDisplayExitDialog’:
windialogs.c:327: warning: passing argument 3 of ‘PostMessageA’ makes integer from pointer without a cast
windialogs.c: In function ‘winDisplayAboutDialog’:
windialogs.c:597: warning: passing argument 3 of ‘PostMessageA’ makes integer from pointer without a cast
windialogs.c: In function ‘winAboutDlgProc’:
windialogs.c:697: warning: comparison between pointer and integer
windialogs.c:701: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘HINSTANCE’
windialogs.c:716: warning: assignment makes integer from pointer without a cast
windialogs.c:736: warning: assignment makes integer from pointer without a cast
windialogs.c:756: warning: assignment makes integer from pointer without a cast
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winconfig.c: In function ‘winNameCompare’:
winconfig.c:715: warning: array subscript has type ‘char’
winconfig.c:715: warning: array subscript has type ‘char’
winconfig.c:716: warning: array subscript has type ‘char’
winconfig.c:716: warning: array subscript has type ‘char’
winconfig.c:730: warning: array subscript has type ‘char’
winconfig.c:730: warning: array subscript has type ‘char’
winconfig.c:731: warning: array subscript has type ‘char’
winconfig.c:731: warning: array subscript has type ‘char’
winconfig.c: In function ‘winNormalizeName’:
winconfig.c:1092: warning: array subscript has type ‘char’
winconfig.c:1093: warning: array subscript has type ‘char’
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winclipboardxevents.c: In function ‘winClipboardFlushXEvents’:
winclipboardxevents.c:225: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘DWORD’
winclipboardxevents.c:266: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘DWORD’
winclipboardxevents.c:619: warning: pointer targets in passing argument 1 of ‘strcat’ differ in signedness
winclipboardxevents.c:659: warning: pointer targets in passing argument 1 of ‘strlen’ differ in signedness
winclipboardxevents.c:669: warning: pointer targets in passing argument 3 of ‘MultiByteToWideChar’ differ in signedness
winclipboardxevents.c:690: warning: pointer targets in passing argument 3 of ‘MultiByteToWideChar’ differ in signedness
winclipboardxevents.c:698: warning: pointer targets in passing argument 1 of ‘strdup’ differ in signedness
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
winclipboardthread.c: In function ‘winClipboardErrorHandler’:
winclipboardthread.c:444: warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Turn off the bad-function-cast warning for the XWin code, it's near impossible
to write code which uses Win32 API calls that doesn't trigger this warning
For example, SendMessage(WM_SETICON) returns an LRESULT, but we are supposed to
know this is safe to cast this result to a HICON, which gcc considers a non-matching
type.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove execute permission from source files
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove XFree86Server define, which was always on anyhow, and the
code which was guarded by !XFree86Server
This completes the process of removal started in 2006 :-)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Use U+0027 APOSTROPHE in XWin DDX help text, rather than
U+2019 RIGHT SINGLE QUOTATION MARK
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Cleanup some VENDOR_STRING/VENDOR_CONTACT cruft
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
After we infer the aspect ratio for the screen, we pick the largest
mode matching that aspect ratio from the best mode pool available.
We then clamp virtual size to that mode, and run the resulting mode
list through the driver's ValidMode hook. In doing so we might filter
away our initial guess. If this happens we shrink the default mode
to the next largest mode from _any_ mode pool. This is usually wrong,
and we should instead pick the next aspect-matched mode from the best
available mode pool (as always, user then driver then default).
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
For whatever reason, some (broken) monitors will crash if you do this.
We're not actually using this information for anything, so let's just
not do it.
Originally reported as http://bugzilla.redhat.com/620333
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This was only ever used from the glint driver, which has since lost its
DRI support.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This was to distinguish XFree86 3.x files from XFree86 4.x files. It
never really made sense to be looking for xorg.conf-4.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This hasn't worked since we switched to dlloader.
Reviewed-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Maybe it's just me but every time I look at it I get confused again and need
to work it out from scratch. Rename the parameters to something
self-explanatory, to/from and min/max.
No functional change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
mi will throw away rendering to input-only windows.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Drop DRAWABLE_BUFFER and related checks, mbuf was the only thing that
used them and it was killed in 0ba82562.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Just use memcpy, seriously.
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Simple typo, should have been adjusting the horizontal timings
consistently since we're not trying to mangle vertical at all.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Patrick E. Kane <pekane52@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
During unwind following an error when attempting to a load a module, we
attempt to call dlclose on a potentially NULL handle. This is a
side-effect of removing the abstraction layer in ab7f057.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
commit cbd4d5dbb7
removes the static declarations of ProcWindowsWMDispatch and
SProcWindowsWMDispatch which precede their first use in
winWindowsWMExtensionInit()
Move winWindowsWMExtensionInit() to after the definition of those
two functions to fix compilation.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds three new functions
void QuartzRandRSetFakeRootless (void);
void QuartzRandRSetFakeFullscreen (void);
void QuartzRandRToggleFullscreen (void);
The first two are identical to requesting the fake modes from a RandR client
The third responds to cmd-alt-a to leave fullscreen or RandR.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Report a fake screen mode that corresponds to the screen mode at startup of the
server excluding the height of the menu bar. If a client requests this mode,
rootless mode is enabled. In all other modes, the root window is shown.
Signed-off-by: Jan Hauffa <hauffa@in.tum.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Querying and changing of resolution and refresh rate is supported,
rotation is not implemented yet.
Signed-off-by: Jan Hauffa <hauffa@in.tum.de>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
ScrnInfo->pixmapPrivate only existed in order to catch invalid access to
the framebuffer by making the backing data NULL across the VT switch.
This was causing more confusion in the higher layers during mode setting
without any real benefit, so remove it.
v2: Kill ShadowModifyPixmapHeader() as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Julien Cristau <jcristau@debian.org>
Cc: Andrew Guertin <lists@dolphinling.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Program received signal SIGSEGV, Segmentation fault.
0x080d4a2d in xf86RandR12ScreenSetSize (pScreen=0x8dca3a0, width=800,
height=600, mmWidth=210, mmHeight=157)
at ../../../../hw/xfree86/modes/xf86RandR12.c:731
731 ../../../../hw/xfree86/modes/xf86RandR12.c: No such file or directory.
in ../../../../hw/xfree86/modes/xf86RandR12.c
(gdb) bt full
height=600, mmWidth=210, mmHeight=157)
at ../../../../hw/xfree86/modes/xf86RandR12.c:731
randrp = 0x8dcae68
pScrn = 0x8dbeb28
config = <value optimized out>
pRoot = 0x8e08e30
pScrnPix = 0xb6d12008
ret = 1
c = <value optimized out>
mmWidth=210, mmHeight=157) at ../../randr/rrscreen.c:185
No locals.
at ../../randr/rrscreen.c:307
pWin = 0x8e08e30
pScreen = 0x8dca3a0
i = <value optimized out>
rc = 0
../../randr/randr.c:485
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Julien Cristau <jcristau@debian.org>
Tested-by: Julien Cristau <jcristau@debian.org>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some functions had to be moved around due some missing static definitions.
Another minor clean up like inexistent function declarations and etc were made
also.
Part of this patch was cooked using:
sed -i -e '/static DISPATCH_PROC*.*;/d' `git ls-files`
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Add nds32 support for compiler related mmio codes.
It includes byte-swap or non-swap operations.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add nds32 definitions and related assembly codes to compiler header files.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
