Motivation:
In a few classes, Netty starts a thread and then sets the context classloader of these threads
to prevent classloader leaks. The Thread#setContextClassLoader method is a privileged method in
that it requires permissions to be executed when there is a security manager in place. Unless
these calls are wrapped in a doPrivileged block, they will fail in an environment with a security
manager and restrictive policy in place.
Modifications:
Wrap the calls to Thread#setContextClassLoader in a AccessController#doPrivileged block.
Result:
After this change, the threads can set the context classloader without any errors in an
environment with a security manager and restrictive policy in place.
Motivation:
Usages of HttpResponseStatus may result in more object allocation then necessary due to not looking for cached objects and the AsciiString parsing method not being used due to CharSequence method being used instead.
Modifications:
- HttpResponseDecoder should attempt to get the HttpResponseStatus from cache instead of allocating a new object
- HttpResponseStatus#parseLine(CharSequence) should check if the type is AsciiString and redirect to the AsciiString parsing method which may not require an additional toString call
- HttpResponseStatus#parseLine(AsciiString) can be optimized and doesn't require and may not require object allocation
Result:
Less allocations when dealing with HttpResponseStatus.
Motivation:
ObjectCleaner inovkes a Runnable which may execute user code (FastThreadLocal#onRemoval) and therefore exceptions maybe thrown. If an exception is thrown the cleanup thread will exit prematurely and we may never finish cleaning up which will result in leaks.
Modifications:
- ObjectCleaner should suppress exceptions and continue cleaning
Result:
ObjectCleaner will reliably clean despite exceptions being thrown.
Motivation:
ObjectCleaner polls a ReferenceQueue which will block indefinitely. However it is possible there is a race condition between the live set of objects being empty due to the WeakReference being cleaned/cleared and polling the queue. If this situation occurs the cleanup thread may never unblock if no more objects are added to the live set, and may result in an application's failure to gracefully close.
Modifications:
- ReferenceQueue.remove should use a timeout to compensate for the race condition, and avoid dead lock
Result:
No more dead lock in ObjectCleaner when polling the ReferenceQueue.
Motivation:
FastThreadLocal#set calls isIndexedVariableSet to determine if we need to register with the cleaner, but the set(InternalThreadLocalMap, V) method will also internally do this check so we can share code and only do the check a single time.
Modifications:
- extract code from set(InternalThreadLocalMap, V) so it can be called externally to determine if a new item was created
Result:
Less code duplication in FastThreadLocal#set.
Motivation:
e329ca1 introduced the user of ObjectCleaner in FastThreadLocal but we missed the case to register our cleaner task if FastThreadLocal.set was called only.
Modifications:
- Use ObjectCleaner also when FastThreadLocal.set is used.
- Add test case.
Result:
ObjectCleaner is always used.
Motivation:
Allow pre-computing calculation of the constants for compiler where it could be.
Similar fix in OpenJDK: [1].
Modifications:
- Use parentheses.
- Simplify static initialization of `BYTE2HEX_*` arrays in `StringUtil`.
Result:
Less bytecode, possible faster calculations at runtime.
[1] https://bugs.openjdk.java.net/browse/JDK-4477961
Motivation:
There is no guarantee that FastThreadLocal.onRemoval(...) is called if the FastThreadLocal is used by "non" FastThreacLocalThreads. This can lead to all sort of problems, like for example memory leaks as direct memory is not correctly cleaned up etc.
Beside this we use ThreadDeathWatcher to check if we need to release buffers back to the pool when thread local caches are collected. In the past ThreadDeathWatcher was used which will need to "wakeup" every second to check if the registered Threads are still alive. If we can ensure FastThreadLocal.onRemoval(...) is called we do not need this anymore.
Modifications:
- Introduce ObjectCleaner and use it to ensure FastThreadLocal.onRemoval(...) is always called when a Thread is collected.
- Deprecate ThreadDeathWatcher
- Add unit tests.
Result:
Consistent way of cleanup FastThreadLocals when a Thread is collected.
Motivation:
We should remove the WeakOrderedQueue from the WeakHashMap directly if possible and only depend on the semantics of the WeakHashMap if there is no other way for us to cleanup it.
Modifications:
Override onRemoval(...) to remove the WeakOrderedQueue if possible.
Result:
Less overhead and quicker collection of WeakOrderedQueue for some cases.
Motivation:
When doStartThread throws an exception, e.g. due to the actual executor being depleted of threads and throwing in its rejected execution handler, the STEE ends up in started state anyway. If we try to execute another task in this executor, it will be queued but the thread won't be started anymore and the task will linger forever.
Modifications:
- Ensure we not update the internal state if the startThread() method throws.
- Add testcase
Result:
Fixes [#7483]
Motivation:
In our Recycler implementation we store a reference to the current Thread in the Stack that is stored in a FastThreadLocal. The Stack itself is referenced in the DefaultHandle itself. A problem can arise if a user stores a Reference to an Object that holds a reference to the DefaultHandle somewhere and either not remove the reference at all or remove it very late. In this case the Thread itself can not be collected as its still referenced in the Stack that is referenced by the DefaultHandle.
Modifications:
- Use a WeakReference to store the reference to the Thread in the Stack
- Add a test case
Result:
Ensure a Thread can be collected in a timely manner in all cases even if it used the Recycler.
Motivation:
ThreadDeathWatcher and GlobalEventExecutor may create and start a new thread from various other threads and so inherit the classloader. We need to ensure we not inherit to allow recycling the classloader.
Modifications:
Use Thread.setContextClassLoader(null) to ensure we not hold a strong reference to the classloader and so not leak it.
Result:
Fixes [#7290].
Automatic-Module-Name entry provides a stable JDK9 module name, when Netty is used in a modular JDK9 applications. More info: http://blog.joda.org/2017/05/java-se-9-jpms-automatic-modules.html
When Netty migrates to JDK9 in the future, the entry can be replaced by actual module-info descriptor.
Modification:
The POM-s are configured to put the correct module names to the manifest.
Result:
Fixes#7218.
Motivation:
We dont need to use the ThreadDeathWatcher if we use a FastThreadLocalThread for which we wrap the Runnable and ensure we call FastThreadLocal.removeAll() once the Runnable completes.
Modifications:
- Dont use a ThreadDeathWatcher if we are sure we will call FastThreadLocal.removeAll()
- Add unit test.
Result:
Less overhead / running theads if you only allocate / deallocate from FastThreadLocalThreads.
Motivation:
OSGI and other enviroments may not allow to even load Unsafe which will lead to an NoClassDefFoundError when trying to access it. We should guard against this.
Modifications:
Catch NoClassDefFoundError when trying to load Unsafe.
Result:
Be able to use netty with a strict OSGI config.
Motivation:
When system property is empty, the default value should be used.
Modification:
- Correctly use the default value in all cases
- Add unit tests
Result:
Correct behaviour
Motivation:
In order to determine if a header contains a value we currently rely
upon getAll(..) and regular expressions. This operation is commonly used
during the encode and decode stage to determine the transfer encoding
(e.g. HttpUtil#isTransferEncodingChunked). This operation requires an
intermediate collection and possibly regular expressions for the
CombinedHttpHeaders use case which can be expensive.
Modifications:
- Add a valuesIterator to HttpHeaders and specializations of this method
for DefaultHttpHeaders, ReadOnlyHttpHeaders, and CombinedHttpHeaders.
Result:
Less intermediate collections and allocation overhead when determining
if HttpHeaders contains a name/value pair.
Motivation:
Netty could handle "connection" or "te" headers more gently when
converting from http/1.1 to http/2 headers. Http/2 headers don't
support single-hop headers, so when we convert from http/1.1 to http/2,
we should drop all single-hop headers. This includes headers like
"transfer-encoding" and "connection", but also the headers that
"connection" points to, since "connection" can be used to designate
other headers as single-hop headers. For the "te" header, we can more
permissively convert it by just dropping non-conforming headers (ie
non-"trailers" headers) which is what we do for all other headers when
we convert.
Modifications:
Add a new blacklist to the http/1.1 to http/2 conversion, which is
constructed from the values of the "connection" header, and stop
throwing an exception when a "te" header is passed with a non-"trailers"
value. Instead, drop all values except for "trailers". Add unit tests
for "connection" and "te" headers when converting from http/1.1 to http/2.
Result:
This will improve the h2c upgrade request, and also conversions from
http/1.1 to http/2. This will simplify implementing spec-compliant
http/2 servers that want to share code between their http/1.1 and http/2
implementations.
[Fixes#7355]
Motivation:
`AbstractScheduledEventExecutor` uses a standard `java.util.PriorityQueue` to keep track of task deadlines. `ScheduledFuture.cancel` removes tasks from this `PriorityQueue`. Unfortunately, `PriorityQueue.remove` has `O(n)` performance since it must search for the item in the entire queue before removing it. This is fast when the future is at the front of the queue (e.g., already triggered) but not when it's randomly located in the queue.
Many servers will use `ScheduledFuture.cancel` on all requests, e.g., to manage a request timeout. As these cancellations will be happen in arbitrary order, when there are many scheduled futures, `PriorityQueue.remove` is a bottleneck and greatly hurts performance with many concurrent requests (>10K).
Modification:
Use netty's `DefaultPriorityQueue` for scheduling futures instead of the JDK. `DefaultPriorityQueue` is almost identical to the JDK version except it is able to remove futures without searching for them in the queue. This means `DefaultPriorityQueue.remove` has `O(log n)` performance.
Result:
Before - cancelling futures has varying performance, capped at `O(n)`
After - cancelling futures has stable performance, capped at `O(log n)`
Benchmark results
After - cancelling in order and in reverse order have similar performance within `O(log n)` bounds
```
Benchmark (num) Mode Cnt Score Error Units
ScheduledFutureTaskBenchmark.cancelInOrder 100 thrpt 20 137779.616 ± 7709.751 ops/s
ScheduledFutureTaskBenchmark.cancelInOrder 1000 thrpt 20 11049.448 ± 385.832 ops/s
ScheduledFutureTaskBenchmark.cancelInOrder 10000 thrpt 20 943.294 ± 12.391 ops/s
ScheduledFutureTaskBenchmark.cancelInOrder 100000 thrpt 20 64.210 ± 1.824 ops/s
ScheduledFutureTaskBenchmark.cancelInReverseOrder 100 thrpt 20 167531.096 ± 9187.865 ops/s
ScheduledFutureTaskBenchmark.cancelInReverseOrder 1000 thrpt 20 33019.786 ± 4737.770 ops/s
ScheduledFutureTaskBenchmark.cancelInReverseOrder 10000 thrpt 20 2976.955 ± 248.555 ops/s
ScheduledFutureTaskBenchmark.cancelInReverseOrder 100000 thrpt 20 362.654 ± 45.716 ops/s
```
Before - cancelling in order and in reverse order have significantly different performance at higher queue size, orders of magnitude worse than the new implementation.
```
Benchmark (num) Mode Cnt Score Error Units
ScheduledFutureTaskBenchmark.cancelInOrder 100 thrpt 20 139968.586 ± 12951.333 ops/s
ScheduledFutureTaskBenchmark.cancelInOrder 1000 thrpt 20 12274.420 ± 337.800 ops/s
ScheduledFutureTaskBenchmark.cancelInOrder 10000 thrpt 20 958.168 ± 15.350 ops/s
ScheduledFutureTaskBenchmark.cancelInOrder 100000 thrpt 20 53.381 ± 13.981 ops/s
ScheduledFutureTaskBenchmark.cancelInReverseOrder 100 thrpt 20 123918.829 ± 3642.517 ops/s
ScheduledFutureTaskBenchmark.cancelInReverseOrder 1000 thrpt 20 5099.810 ± 206.992 ops/s
ScheduledFutureTaskBenchmark.cancelInReverseOrder 10000 thrpt 20 72.335 ± 0.443 ops/s
ScheduledFutureTaskBenchmark.cancelInReverseOrder 100000 thrpt 20 0.743 ± 0.003 ops/s
```
Motivation:
When looking for a leak, its nice to be able to request at least a
number of leaks.
Modification:
* Made all leak records up to the target amoutn recorded, and only
then enable backing off.
* Enable recording more than 32 elements. Previously the shift
amount made this impossible.
Result:
Ability to record all accesses.
Motivation:
Fix NullPointerExceptions that occur when running netty-tcnative inside the bootstrap class loader.
Modifications:
- Replace loader.getResource(...) with ClassLoader.getSystemResource(...) when loader is null.
- Replace loader.loadClass(...) with Class.forName(..., false, loader) which works when loader is both null and non-null.
Result:
Support running native libs in bootstrap class loader
Motivation:
Phantom references are for cleaning up resources that were
forgotten, which means they keep their referent alive. This
means garbage is kept around until the refqueue is drained, rather
than when the reference is unreachable.
Modification:
Use Weak References instead of Phantoms
Result:
More punctual leak detection.
Motivation:
Objects of java.util.TreeMap or java.util.TreeSet will become
non-Serializable if instantiated with Comparators, which are not also
Serializable. This can result in unexpected and difficult-to-diagnose
bugs.
Modifications:
Implements Serializable for all classes, which implements Comparator.
Result:
Proper Comparators which will not force collections to
non-Serializable mode.
Motivation:
Even if it's a super micro-optimization (most JVM could optimize such
cases in runtime), in theory (and according to some perf tests) it
may help a bit. It also makes a code more clear and allows you to
access such methods in the test scope directly, without instance of
the class.
Modifications:
Add 'static' modifier for all methods, where it possible. Mostly in
test scope.
Result:
Cleaner code with proper 'static' modifiers.
Motivation:
Without a 'serialVersionUID' field, any change to a class will make
previously serialized versions unreadable.
Modifications:
Add missed 'serialVersionUID' field for all Serializable
classes.
Result:
Proper deserialization of previously serialized objects.
Configuring this is tough because there is split between highly shared (and accessed) objects and lightly accessed objects.
Modification:
There are a number of changes here. In relative order of importance:
API / Functionality changes:
* Max records and max sample records are gone. Only "target" records, the number of records tries to retain is exposed.
* Records are sampled based on the number of already stored records. The likelihood of recording a new sample is `2^(-n)`, where `n` is the number of currently stored elements.
* Records are stored in a concurrent stack structure rather than a list. This avoids a head and tail. Since the stack is only read once, there is no need to maintain head and tail pointers
* The properties of this imply that the very first and very last access are always recorded. When deciding to sample, the top element is replaced rather than pushed.
* Samples that happen between the first and last accesses now have a chance of being recorded. Previously only the final few were kept.
* Sampling is no longer deterministic. Previously, a deterministic access pattern meant that you could conceivably always miss some access points.
* Sampling has a linear ramp for low values and and exponentially backs off roughly equal to 2^n. This means that for 1,000,000 accesses, about 20 will actually be kept. I have an elegant proof for this which is too large to fit in this commit message.
Code changes:
* All locks are gone. Because sampling rarely needs to do a write, there is almost 0 contention. The dropped records counter is slightly contentious, but this could be removed or changed to a LongAdder. This was not done because of memory concerns.
* Stack trace exclusion is done outside of RLD. Classes can opt to remove some of their methods.
* Stack trace exclusion is faster, since it uses String.equals, often getting a pointer compare due to interning. Previously it used contains()
* Leak printing is outputted fairly differently. I tried to preserve as much of the original formatting as possible, but some things didn't make sense to keep.
Result:
More useful leak reporting.
Faster:
```
Before:
Benchmark (recordTimes) Mode Cnt Score Error Units
ResourceLeakDetectorRecordBenchmark.record 8 thrpt 20 136293.404 ± 7669.454 ops/s
ResourceLeakDetectorRecordBenchmark.record 16 thrpt 20 72805.720 ± 3710.864 ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint 8 thrpt 20 139131.215 ± 4882.751 ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint 16 thrpt 20 74146.313 ± 4999.246 ops/s
After:
Benchmark (recordTimes) Mode Cnt Score Error Units
ResourceLeakDetectorRecordBenchmark.record 8 thrpt 20 155281.969 ± 5301.399 ops/s
ResourceLeakDetectorRecordBenchmark.record 16 thrpt 20 77866.239 ± 3821.054 ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint 8 thrpt 20 153360.036 ± 8611.353 ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint 16 thrpt 20 78670.804 ± 2399.149 ops/s
```
Motivation:
We need to upgrade our dependencies to versions which use ASM 6.0.0+ to support compiling on java9.
Modifications:
Update animal-sniffer-maven-plugin and maven-shade-plugin.
Result:
Fixes https://github.com/netty/netty/issues/6100
Motivation:
There are 2 motivations, the first depends on the second:
Loading Netty Epoll statically stopped working in 4.1.16, due to
`Native` always loading the arch specific shared object. In a
static binary, there is no arch specific SO.
Second, there are a ton of exceptions that can happen when loading
a native library. When loading native code, Netty tries a bunch of
different paths but a failure in any given may not be fatal.
Additionally: turning on debug logging is not always feasible so
exceptions get silently swallowed.
Modifications:
* Change Epoll and Kqueue to try the static load second
* Modify NativeLibraryLoader to record all the locations where
exceptions occur.
* Attempt to use `addSuppressed` from Java 7 if available.
Alternatives Considered:
An alternative would be to record log messages at each failure. If
all load attempts fail, the log messages are printed as warning,
else as debug. The problem with this is there is no `LogRecord` to
create like in java.util.logging. Buffering the args to
logger.log() at the end of the method loses the call site, and
changes the order of events to be confusing.
Another alternative is to teach NativeLibraryLoader about loading
the SO first, and then the static version. This would consolidate
the code fore Epoll, Kqueue, and TCNative. I think this is the
long term better option, but this PR is changing a lot already.
Someone else can take a crack at it later
Results:
Epoll Still Loads and easier debugging.
Motivation:
Highly retained and released objects have contention on their ref
count. Currently, the ref count is updated using compareAndSet
with care to make sure the count doesn't overflow, double free, or
revive the object.
Profiling has shown that a non trivial (~1%) of CPU time on gRPC
latency benchmarks is from the ref count updating.
Modification:
Rather than pessimistically assuming the ref count will be invalid,
optimistically update it assuming it will be. If the update was
wrong, then use the slow path to revert the change and throw an
execption. Most of the time, the ref counts are correct.
This changes from using compareAndSet to getAndAdd, which emits a
different CPU instruction on x86 (CMPXCHG to XADD). Because the
CPU knows it will modifiy the memory, it can avoid contention.
On a highly contended machine, this can be about 2x faster.
There is a downside to the new approach. The ref counters can
temporarily enter invalid states if over retained or over released.
The code does handle these overflow and underflow scenarios, but it
is possible that another concurrent access may push the failure to
a different location. For example:
Time 1 Thread 1: obj.retain(INT_MAX - 1)
Time 2 Thread 1: obj.retain(2)
Time 2 Thread 2: obj.retain(1)
Previously Thread 2 would always succeed and Thread 1 would always
fail on the second access. Now, thread 2 could fail while thread 1
is rolling back its change.
====
There are a few reasons why I think this is okay:
1. Buggy code is going to have bugs. An exception _is_ going to be
thrown. This just causes the other threads to notice the state
is messed up and stop early.
2. If high retention counts are a use case, then ref count should
be a long rather than an int.
3. The critical section is greatly reduced compared to the previous
version, so the likelihood of this happening is lower
4. On error, the code always rollsback the change atomically, so
there is no possibility of corruption.
Result:
Faster refcounting
```
BEFORE:
Benchmark (delay) Mode Cnt Score Error Units
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 1 sample 2901361 804.579 ± 1.835 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 10 sample 3038729 785.376 ± 16.471 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 100 sample 2899401 817.392 ± 6.668 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 1000 sample 3650566 2077.700 ± 0.600 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 10000 sample 3005467 19949.334 ± 4.243 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 1 sample 456091 48.610 ± 1.162 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 10 sample 732051 62.599 ± 0.815 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 100 sample 778925 228.629 ± 1.205 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 1000 sample 633682 2002.987 ± 2.856 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 10000 sample 506442 19735.345 ± 12.312 ns/op
AFTER:
Benchmark (delay) Mode Cnt Score Error Units
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 1 sample 3761980 383.436 ± 1.315 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 10 sample 3667304 474.429 ± 1.101 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 100 sample 3039374 479.267 ± 0.435 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 1000 sample 3709210 2044.603 ± 0.989 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended 10000 sample 3011591 19904.227 ± 18.025 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 1 sample 494975 52.269 ± 8.345 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 10 sample 771094 62.290 ± 0.795 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 100 sample 763230 235.044 ± 1.552 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 1000 sample 634037 2006.578 ± 3.574 ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended 10000 sample 506284 19742.605 ± 13.729 ns/op
```
Motivation:
3c8c7fc7e9 introduced some changes to the ResourceLeakDetector that introduced a regression and so would always log that paranoid leak detection should be enabled even it was already.
Modifications:
Correctly not clear the recorded stacktraces when we process the reference queue so we can log these.
Result:
ResourceLeakDetector works again as expected.
Motivation:
NativeLibraryLoader uses ClassLoader#getResource method that can return nulls when the resource cannot be found. The returned url variable should be checked for nullity and fail in a more usable manner than a NullPointerException
Modifications:
Fail with a FileNotFoundException
Result:
Fixes [#7222].
Motiviation:
The ResourceLeakDetector helps to detect and troubleshoot resource leaks and is often used even in production enviroments with a low level. Because of this its import that we try to keep the overhead as low as overhead. Most of the times no leak is detected (as all is correctly handled) so we should keep the overhead for this case as low as possible.
Modifications:
- Only call getStackTrace() if a leak is reported as it is a very expensive native call. Also handle the filtering and creating of the String in a lazy fashion
- Remove the need to mantain a Queue to store the last access records
- Add benchmark
Result:
Huge decrease of performance overhead.
Before the patch:
Benchmark (recordTimes) Mode Cnt Score Error Units
ResourceLeakDetectorRecordBenchmark.record 8 thrpt 20 4358.367 ± 116.419 ops/s
ResourceLeakDetectorRecordBenchmark.record 16 thrpt 20 2306.027 ± 55.044 ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint 8 thrpt 20 4220.979 ± 114.046 ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint 16 thrpt 20 2250.734 ± 55.352 ops/s
With this patch:
Benchmark (recordTimes) Mode Cnt Score Error Units
ResourceLeakDetectorRecordBenchmark.record 8 thrpt 20 71398.957 ± 2695.925 ops/s
ResourceLeakDetectorRecordBenchmark.record 16 thrpt 20 38643.963 ± 1446.694 ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint 8 thrpt 20 71677.882 ± 2923.622 ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint 16 thrpt 20 38660.176 ± 1467.732 ops/s
Motivation:
RLD allocates an ArrayDeque in anticipation of recording access
points. If the leak detection level is less than ADVANCED though,
the dequeue is never used. Since SIMPLE is the default level,
there is a minor perf win to not preemptively allocate it.
This showed up in garbage profiling when creation a high number of
buffers.
Modifications:
Only allocate the dequeue if it will be used.
Result:
Less garbage created.
Motivation:
NativeLibraryLoader may only log a debug statement if the library is successfully loaded from java.library.path, but will log failure statements the if load for java.library.path fails which can mislead users to believe the load actually failed when it may have succeeded.
Modifications:
- Always load a debug statement when a library was successfully loaded
Result:
NativeLibraryLoader log statements more clear.
Motivation:
When Log4j2Logger is used with PatternLayout (%F:%L)%c.%M, the log message incorrect shows:
(Log4J2Logger.java:73)io.netty.util.internal.PlatformDependent0.debug ....
Modification:
Extend AbstractLogger
Result:
Fixes [#7186].
Motivation:
We should only try to load the native artifacts if the architecture we are currently running on is the same as the one the native libraries were compiled for.
Modifications:
Include architecture in native lib name and append the current arch when trying to load these. This will fail then if its not the same as the arch of the compiled arch.
Result:
Fixes [#7150].
Motivation:
When the user want to have the direct memory explicitly managed by the GC (just as java.nio does) it is useful to be able to construct an UnpooledByteBufAllocator that allows this without the chances to see any memory leak.
Modifications:
Allow to explicitly disable the usage of reflection to construct direct ByteBufs and so be sure these will be collected by GC.
Result:
More flexible way to use the UnpooledByteBufAllocator.
Motivation:
The documentation for field updates says:
> Note that the guarantees of the {@code compareAndSet}
> method in this class are weaker than in other atomic classes.
> Because this class cannot ensure that all uses of the field
> are appropriate for purposes of atomic access, it can
> guarantee atomicity only with respect to other invocations of
> {@code compareAndSet} and {@code set} on the same updater.
This implies that volatiles shouldn't use normal assignment; the
updater should set them.
Modifications:
Use setter for field updaters that make use of compareAndSet.
Result:
Concurrency compliant code
Motivation:
PD and PD0 Both try to find and use Unsafe. If unavailable, they
try to log why and continue on. However, it is not always east to
enable this logging. Chaining exceptions together is much easier
to reach, and the original exception is relevant when Unsafe is
needed.
Modifications:
* Make PD log why PD0 could not be loaded with a trace level log
* Make PD0 remember why Unsafe wasn't available
* Expose unavailability cause through PD for higher level use.
* Make Epoll and KQueue include the reason when failing
Result:
Easier debugging in hard to reconfigure environments
Motivation:
Continuing to make netty happy when compiling through errorprone.
Modification:
Mostly comments, some minor switch statement changes.
Result:
No more compiler errors!
Motivation:
On restricted systems (e.g. grsecurity), it might not be possible to write a .so on disk and load it afterwards. On those system Netty should check java.library.path for libraries to load.
Modifications:
Changed NativeLibraryLoader.java to first try to load libs from java.library.path before exporting the .so to disk.
Result:
Libraries load fine on restricted systems.
Motivation:
When compiling this code and running it through errorprone[1], this message appears:
```
StringUtil.java:493: error: [FallThrough] Switch case may fall through; add a `// fall through` comment if it was deliberate
case LINE_FEED:
^
(see http://errorprone.info/bugpattern/FallThrough)
```
By adding that comment, it silences the error and also makes clear the intention of that statement.
[1]http://errorprone.info/index
Modification:
Add simple comment.
Result:
Errorprone is happier with the code.
Motivation:
The `AsciiString#toString` method calculate string value and cache it into field. If an `AsciiString` created from the `String` value, we can avoid rebuilding strings if we cache them immediately when creating `AsciiString`. It would be useful for constants strings, which already stored in the JVMs string table, or in cases where an unavoidable `#toString `method call is assumed.
Modifications:
- Add new static method `AsciiString#cache(String)` which save string value into cache field.
- Apply a "benign" data race in the `#hashCode` and `#toString` methods.
Result:
Less memory usage in some `AsciiString` use cases.
Motivation:
At the moment we try to load the library using multiple names which includes names using - but also _ . We should just use _ all the time.
Modifications:
Replace - with _
Result:
Fixes [#7069]
Motivation:
In some cases of using an `InternalThreadLocalMap#stringBuilder`, the `StringBuilder`s size can often exceed the exist limit (1024 bytes). This can lead to permanent memory reallocation.
Modifications:
Add custom properties for the initial capacity and maximum size (after which the `StringBuilder`s capacity will be reduced to the initial capacity).
Result:
An `InternalThreadLocalMap#stringBuilder`s initial and max size is configurable. Fixes [#7092].
Motivation:
NativeLibraryLoader has some code-duplication that can be removed.
Modifications:
Remove duplicated code and just use provided methods of PlatformDependent.
Result:
Less code duplication, fixes [#3756].
Motivation:
Now that the NativeLibraryLoader implicitly detects the shaded package prefix we no longer need the io.netty.packagePrefix system property.
Modifications:
- Remove io.netty.packagePrefix processing from NativeLibraryLoader
Result:
Code is cleaner.
Motivation:
Shading requires renaming binary components (.so, .dll; for tcnative,
epoll, etc). But the rename then requires setting the
io.netty.packagePrefix system property on the command line or runtime,
which is either a burden or not feasible.
If you don't rename the binary components everything appears to
work, until a dependency on a second version of the binary component is
added. At that point, only one version of the binary will be loaded...
which is what shading is supposed to prevent. So for valid shading, the
binaries must be renamed.
Modifications:
Automatically detect the package prefix by comparing the actual class
name to the non-shaded expected class name. The expected class name must
be obfuscated to prevent shading utilities from changing it.
Result:
When shading and using binary components, runtime configuration is no
longer necessary.
Pre-existing shading users that were not renaming the binary components
will break, because the packagePrefix previously defaulted to "". Since
these pre-existing users had broken configurations that only _appeared_
to work, this breakage is considered a Good Thing. Users may workaround
this breakage temporarily by setting -Dio.netty.packagePrefix= to
restore packagePrefix to "".
Fixes#6963
Motivation:
ResourceLeakDetector records at most MAX_RECORDS+1 records
Modifications:
Make room before add to lastRecords
Result:
ResourceLeakDetector will record at most MAX_RECORDS records
Motivation:
JCTools 2.0.2 provides an unbounded MPSC linked queue. Before we shaded JCTools we had our own unbounded MPSC linked queue and used it in various places but gave this up because there was no public equivalent available in JCTools at the time.
Modifications:
- Use JCTool's MPSC linked queue when no upper bound is specified
Result:
Fixes https://github.com/netty/netty/issues/5951
Motivation:
PR #6811 introduced a public utility methods to decode hex dump and its parts, but they are not visible from netty-common.
Modifications:
1. Move the `decodeHexByte`, `decodeHexDump` and `decodeHexNibble` methods into `StringUtils`.
2. Apply these methods where applicable.
3. Remove similar methods from other locations (e.g. `HpackHex` test class).
Result:
Less code duplication.
Motivation:
A `StringUtil#escapeCsv` creates new `StringBuilder` on each value even if the same string is returned in the end.
Modifications:
Create new `StringBuilder` only if it really needed. Otherwise, return the original string (or just trimmed substring).
Result:
Less GC load. Up to 4x faster work for not changed strings.
Motivation:
AppendableCharSequence depends upon IndexOutOfBoundsException to trigger a resize operation under the assumption that the resize operation will be rare if the initial size guess is good. However if the initial size guess is not good then the performance will be more unpredictable and likely suffer.
Modifications:
- Check the position in AppendableCharSequence#append to determine if a resize is necessary
Result:
More predictable performance in AppendableCharSequence#append.
Motivation:
We need to use FQCN to prevent classloader issues for classes that are > Java6. This is a cleanup of ed5fcbb773.
Modifications:
Just remove the imports and use FQCN.
Result:
No classloader issues with java6
Motivation:
Docker's `--tmpfs` flag mounts the temp volume with `noexec` by default,
resulting in an UnsatisfiedLinkError. While this is good security
practice, it is a surprising failure from a seemingly innocuous flag.
Modifications:
Add a best-effort attempt in `NativeLibraryLoader` to detect when temp
files beng loaded cannot be executed even when execution permissions
are set, often because the `noexec` flag is set on the volume.
Requires numerous additional exclusions to the Animal Sniffer config
for Java7 POSIX permissions manipulation.
Result:
Fixes [#6678].
Motivation:
For our native libraries in netty we support shading, to have this work on runtime the user needs to set a system property. This code should shared.
Modifications:
Move logic to NativeLbiraryLoader and so share for all native libs.
Result:
Less code duplication and also will work for netty-tcnative out of the box once it support shading
Motivation:
`FormattingTuple.getArgArray()` is never used.
In the `MessageFormatter` it is possible to make
some improvements, e.g. replace `StringBuffer`
with `StringBuilder`, avoid redundant allocations, etc.
Modifications:
- Remove `argArray` field from the `FormattingTuple`.
- In `MessageFormatter`:
- replace `StringBuffer` with `StringBuilder`,
- replace `HashMap` with `HashSet` and make it lazy initialized.
- avoid redundant allocations (`substring()`, etc.)
- use appropriate StringBuilder's methods for the some `Number` values.
- Porting unit tests from `slf4j`.
Result:
Less GC load on logging with internal `MessageFormatter`.
Motivation:
IPv4/6 validation methods use allocations, which can be avoided.
IPv4 parse method use StringTokenizer.
Modifications:
Rewriting IPv4/6 validation methods to avoid allocations.
Rewriting IPv4 parse method without use StringTokenizer.
Result:
IPv4/6 validation and IPv4 parsing faster up to 2-10x.
Motivation:
We should only try to load jdk.internal.misc.Unsafe if we run on Java9+ to eliminate noise in the log.
Modifications:
- Move javaVersion() and related methods to PlatformDependent0 to be able to use these in the static initializer without creating a cycle.
- Only try to load jdk.internal.misc.Unsafe when running in Java9+
Result:
Less noise in the log when running pre java9.
Motivation:
A previous change allocated a new thread local string builder if it
was getting too large. This is a good change, these string builders
can accidentally get too large and then never shrunk and that is sort
of a memory leak. However, the change allocates an entirely new string
builder which is more allocations than necessary. Instead, we can trim
the string builder if its too large, this only allocates an extra
backing array instead of a whole new object.
Modifications:
If the string builder is above a threshold, we trim the string builder
and then ensure its capacity is reasonable to we do not allocate too
much as we start using the string builder.
Result:
The thread local string builder do not serve as a memory yet we do not
allocate too many new objects.
Motivation:
`NetUtil`'s methods `isValidIpV6Address` and `getIPv6ByName` incorrectly validate some IPv6 addresses.
Modifications:
- `getIPv6ByName`: add checks for single colon at the start or end.
- `isValidIpV6Address`: fix checks for the count of colons and use `endOffset` instead of `ipAddress.length()` for the cases with the brackets or '%'.
Result:
More correct implementation of `NetUtil#isValidIpV6Address` and `NetUtil#getIPv6ByName`.
Motivation:
AtomicIntegerFieldUpdater#get is unnecessary, I think use simple volatile read is cleaner
Modifications:
Replace code STATE_UPDATER.get(this) to state in SingleThreadEventExecutor
Result:
Cleaner code
Motivation:
InternalThreadLocalMap#stringBuilder: ensure memory overhead
Modification:
If the capacity of StringBuilder is greater than 65536 then release it on the next time you get StringBuilder and re-create a StringBuilder.
Result:
Possible less memory usage.
Motivation:
If unsafe is unavailable, we can not use the cleaner anyway. If we try
to set it up, we get an annoying log message about unsafe being
unavailable (when debug logging is enabled). We know this will fail, so
we should not even bother and avoid the log message.
Modifications:
This commit adds a guard against setting up the cleaner if it is not
going to be available because unsafe is unavailable.
Result:
We do not try to set up the cleaner if unsafe is unavailable, and we do
not get an annoying log message.
Motivation:
Users should not see a scary log message when Netty is initialized if
Netty configuration explicitly disables unsafe. The log message that
produces this warning was previously guarded but the guard was
lost.
Modifications:
This commit brings back the guard against the scary log message if
unsafe is explicitly disabled.
Result:
No log message is produced when unsafe is unavailable because Netty was
told to not look for it.
Motivation:
We currently don't have a native transport which supports kqueue https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2. This can be useful for BSD systems such as MacOS to take advantage of native features, and provide feature parity with the Linux native transport.
Modifications:
- Make a new transport-native-unix-common module with all the java classes and JNI code for generic unix items. This module will build a static library for each unix platform, and included in the dynamic libraries used for JNI (e.g. transport-native-epoll, and eventually kqueue).
- Make a new transport-native-unix-common-tests module where the tests for the transport-native-unix-common module will live. This is so each unix platform can inherit from these test and ensure they pass.
- Add a new transport-native-kqueue module which uses JNI to directly interact with kqueue
Result:
JNI support for kqueue.
Fixes https://github.com/netty/netty/issues/2448
Fixes https://github.com/netty/netty/issues/4231
Motivation:
Fixes#6681.
Modification:
For the sake of better timer observability, expose the number of pending timeouts through the new HashedWheelTimer.pendingTimeouts method .
Result:
It's now ridiculously easy to observe Netty timer's very basic and yet important metric, the number of pending tasks/timeouts.
Motivation:
NetUtil#isValidIpV6Address and NetUtil#getIPv6ByName allowed an invalid form of mapped IPv4 addresses which lead to accepting invalid IPv6 addresses as valid.
Modifications:
- NetUtil#isValidIpV6Address and NetUtil#getIPv6ByName should only allow 7 colons for an IPv4 address if they are the first 2 characters.
Result:
More correct implementation of NetUtil#isValidIpV6Address and NetUtil#getIPv6ByName
Motivation:
NetUtil#getByName and NetUtil#isValidIpV6Address do not strictly enforce the format of IPv4 addresses that are allowed to be embedded in IPv6 addresses as specified in https://tools.ietf.org/html/rfc4291#section-2.5.5. This may lead to invalid addresses being parsed, or invalid addresses being considered valid. Compression of a single IPv6 word was also not handled correctly if there are 7 : characters.
Modifications:
- NetUtil#isValidIpV6Address should enforce the IPv4-Compatible and IPv4-Mapped are the only valid formats for including IPv4 addresses as specified in https://tools.ietf.org/html/rfc4291#section-2.5.5
- NetUtil#getByName should more stritcly parse IPv6 addresses which contain IPv4 addresses as specified in https://tools.ietf.org/html/rfc4291#section-2.5.5
- NetUtil should allow compression even if the number of : characters is 7.
- NetUtil#createByteArrayFromIpAddressString should use the same IP string to byte[] translation which is used in NetUtil#getByName
Result:
NetUtil#getByName and NetUtil#isValidIpV6Address respect the IPv6 RFC which defines the valid formats for embedding IPv4 addresses.
Motivation:
In cases when an application is running in a container or is otherwise
constrained to the number of processors that it is using, the JVM
invocation Runtime#availableProcessors will not return the constrained
value but rather the number of processors available to the virtual
machine. Netty uses this number in sizing various resources.
Additionally, some applications will constrain the number of threads
that they are using independenly of the number of processors available
on the system. Thus, applications should have a way to globally
configure the number of processors.
Modifications:
Rather than invoking Runtime#availableProcessors, Netty should rely on a
method that enables configuration when the JVM is started or by the
application. This commit exposes a new class NettyRuntime for enabling
such configuraiton. This value can only be set once. Its default value
is Runtime#availableProcessors so that there is no visible change to
existing applications, but enables configuring either a system property
or configuring during application startup (e.g., based on settings used
to configure the application).
Additionally, we introduce the usage of forbidden-apis to prevent future
uses of Runtime#availableProcessors from creeping. Future work should
enable the bundled signatures and clean up uses of deprecated and
other forbidden methods.
Result:
Netty can be configured to not use the underlying number of processors,
but rather the constrained number of processors.
Motivation:
Java9 added a new method to Unsafe which allows to allocate a byte[] without memset it. This can have a massive impact in allocation times when the byte[] is big. This change allows to enable this when using Java9 with the io.netty.tryAllocateUninitializedArray property when running Java9+. Please note that you will need to open up the jdk.internal.misc package via '--add-opens java.base/jdk.internal.misc=ALL-UNNAMED' as well.
Modifications:
Allow to allocate byte[] without memset on Java9+
Result:
Better performance when allocate big heap buffers and using java9.
Motivation:
As the javadoc of ScheduledExecutorService state:
Zero and negative delays (but not periods) are also allowed in schedule methods,and are treated as requests for immediate execution.
Modifications:
- Correctly handle delay <= 0.
- Add unit tests.
Result:
Fixes [#6627].
Motivation:
When debugging netty memory leaks, it's sometimes helpful to
print the object's reference count.
Modifications:
Add `refCnt` methods to set of already exitsting helpers for ref coutned
objects.
Result:
Users will have utility to print object's ref count without much of a
boilerplate.
Motivation:
Java9 adds a new method to Unsafe which allows to free direct ByteBuffer via the cleaner without the need to use an commandline arguments.
Modifications:
- Add Cleaner interface
- Add CleanerJava9 which will be used when using Java9+ and take care of release direct ByteBuffer
- Let Cleaner0 implement Cleaner
Result:
Be able to free direct ByteBuffer on Java9+ again without any commandline arguments.
Motivation:
When UNSAFE.allocateMemory is returning an address whose high bit is set we currently throw an IllegalArgumentException. This is not correct as it may return a negative number on at least sparc.
Modifications:
- Allow to pass in negative memoryAddress
- Add unit tests
Result:
Correctly validate the memoryAddress and so also work on sparc as expected. Fixes [#6574].
Motivation:
The updated HTTP/1.x RFC allows for header values to be CSV and separated by OWS [1]. CombinedHttpHeaders should remove this OWS on insertion.
[1] https://tools.ietf.org/html/rfc7230#section-7
Modification:
CombinedHttpHeaders doesn't account for the OWS and returns it back to the user as part of the value.
Result:
Fixes#6452
Motivation:
We should use SystemPropertyUtil to access system properties and so always handle SecurityExceptions.
Modifications:
Use SystemPropertyUtil everywhere.
Result:
Better and consist handling of SecurityException.
Motivation:
We used some deprecated Mockito methods.
Modifications:
- Replace deprecated method usage
- Some cleanup
Result:
No more usage of deprecated Mockito methods. Fixes [#6482].
Motivation:
We forked a new process to detect if the program is run by root. We should better just use user.name system property
Modifications:
- Change PlatformDependent.isRoot0() to read the user.name system property to detect if root runs the program and rename it to maybeSuperUser0().
- Rename PlatformDependent.isRoot() to maybeSuperUser() and let it init directly in the static block
Result:
Less heavy way to detect if the program is run by root.
Motivation:
When UnorderedThreadPoolEventExecutor.execute / submit etc is called it will consume up to 100 % CPU even after the task was executed.
Modifications:
Add a special wrapper which we will be used in execute(...) to wrap the submitted Runnable. This is needed as ScheduledThreadPoolExecutor.execute(...) will delegate to submit(...) which will then use decorateTask(...). The problem with this is that decorateTask(...) needs to ensure we only do our own decoration if we not call from execute(...) as otherwise we may end up creating an endless loop because DefaultPromise will call EventExecutor.execute(...) when notify the listeners of the promise.
Result:
Fixes [#6507].
Motivation:
PlatformDependent0 makes assumptions that the array index scale for byte[] is always 1. If this is not the case the results from methods which make this assumption will be undefined.
Modifications:
- PlatformDependent0 should check if unsafe.arrayIndexScale(byte[].class) is not 1, and if so not use unsafe
Result:
Assumptions made by optimizations in PlatformDependent0 which use byte[] are explicitly enforced.
Motivation:
We only need to add the port to the HOST header value if its not a standard port.
Modifications:
- Only add port if needed.
- Fix parsing of ipv6 address which is enclosed by [].
Result:
Fixes [#6426].
Motivation:
Calling a static method is faster then dynamic
Modifications:
Add 'static' keyword for methods where it missed
Result:
A bit faster method calls
Motivation:
We shipped a javassist based implementation for typematching and logged a confusing debug message about missing javassist. We never were able to prove it really gives any perf improvements so we should just remove it.
Modifications:
- Remove javassist dependency and impl
- Fix possible classloader deadlock as reported by intellij
Result:
Less code to maintain and less confusing log message.
Motivation:
We should log why we can not use ByteBuffer.cleaner and so maybe allow the user to fix it.
Modifications:
- Use Unsafe to access the field
- Log the exception when we can not use ByteBuffer.cleaner
Result:
Easier to debug why using cleaner is not possible.
Motivation:
We have our own ThreadLocalRandom implementation to support older JDKs . That said we should prefer the JDK provided when running on JDK >= 7
Modification:
Using ThreadLocalRandom implementation of the JDK when possible.
Result:
Make use of JDK implementations when possible.
Motivation:
Java9 does not allow changing access level via reflection by default. This lead to the situation that netty disabled Unsafe completely as ByteBuffer.address could not be read.
Modification:
Use Unsafe to read the address field as this works on all Java versions.
Result:
Again be able to use Unsafe optimisations when using Netty with Java9
Motivation:
NetworkInterface.getNetworkInterfaces() may return null if no network interfaces are found. We should guard against it.
Modifications:
Check for null return value.
Result:
Fixes [#6384]
Motiviation:
Simplify implementation of compareTo/equals/hashCode for ChannelIds.
Modifications:
We simplfy the hashCode implementation for DefaultChannelId by not
making it random, but making it based on the underlying data. We fix the
compareTo implementation for DefaultChannelId by using lexicographic
comparison of the underlying data array. We fix the compareTo
implementation for CustomChannelId to avoid the possibility of overflow.
Result:
Cleaner code that is easier to maintain.
Motivation:
Java8 is out now for some time and JDK7 is no longer supported officially. We should remove all our backports and just use what the JDK provides us. This also will allow us to use intrinsics that are offered by the JDK implementations.
Modifications:
Remove all backports of jdk8 classes.
Result:
Use what the JDK offers us. This also fixes [#5458]
Motivation:
Initialization of PlatformDependent0 fails on Java 9 in static initializer when calling setAccessible(true).
Modifications:
Add RefelectionUtil which can be used to safely try if setAccessible(true) can be used or not and if not fail back to non reflection.
Result:
Fixed [#6345]
Motivation:
EpollRecvByteAllocatorHandle intends to override the meaning of "maybe more data to read" which is a concept also used in all existing implementations of RecvByteBufAllocator$Handle but the interface doesn't support overriding. Because the interfaces lack the ability to propagate this computation EpollRecvByteAllocatorHandle attempts to implement a heuristic on top of the delegate which may lead to reading when we shouldn't or not reading data.
Modifications:
- Create a new interface ExtendedRecvByteBufAllocator and ExtendedHandle which allows the "maybe more data to read" between interfaces
- Deprecate RecvByteBufAllocator and change all existing implementations to extend ExtendedRecvByteBufAllocator
- transport-native-epoll should require ExtendedRecvByteBufAllocator so the "maybe more data to read" can be propagated to the ExtendedHandle
Result:
Fixes https://github.com/netty/netty/issues/6303.
Motivation:
The JDK uses gethostbyname for blocking hostname resoltuion. gethostbyname can be configured on Unix systems according to [1][2]. This may impact the name server that is used to resolve particular domains or just override the default fall-back resolver. DnsNameResolver currently ignores these configuration files which means the default resolution behavior is different than the JDK. This may lead to unexpected resolution failures which succeed when using the JDK's resolver.
Modifications:
- Add an interface which can override what DnsServerAddressStream to use for a given hostname
- Provide a Unix specific implementation of this interface and implement [1][2]. Some elements may be ignored sortlist, timeout, etc...
Result:
DnsNameResolver behaves more like the JDK resolver by default.
[1] https://linux.die.net/man/5/resolver
[2] https://developer.apple.com/legacy/library/documentation/Darwin/Reference/ManPages/man5/resolver.5.html
Motivation:
Update of Groovy is needed to compile on recent java9 releases.
Modification:
Update to Groovy 2.4.8
Result:
This change allows Netty to be successfully compiled on more recent Java 9 previews.
Motivation:
ResourceLeakDetector supports a parameter called maxActive. This parameter is used in attempt to limit the amount of objects which are being tracked for leaks at any given time, and generates an error log message if this limit is exceeded. This assumes that there is a relationship between leak sample rate and object lifetime for objects which are already being tracked. This relationship may appear to work in cases were there are a single leak record per object and those leak records live for the lifetime of the application but in general this relationship doesn't exist. The original motivation was to provide a limit for cases such as HashedWheelTimer to limit the number of instances which exist at any given time. This limit is not enforced in all circumstances in HashedWheelTimer (e.g. if the thread is a daemon) and can be implemented outside ResourceLeakDetector.
Modifications:
- Deprecate all methods which interact with maxActive in ResourceLeakDetectorFactory and ResourceLeakDetector
- Remove all logic related to maxActive in ResourceLeakDetector
- HashedWheelTimer implements its own logic to impose a limit and warn users if too many instances exists at any given time.
Result:
Fixes https://github.com/netty/netty/issues/6225.
Motivation:
We used various mocking frameworks. We should only use one...
Modifications:
Make usage of mocking framework consistent by only using Mockito.
Result:
Less dependencies and more consistent mocking usage.
Motivation:
When comparing MAC addresses searching for the best MAC address, if
locally-administered address (e.g., from a Docker container) is compared
against an empty MAC address, the empty MAC address will be marked as
preferred. In cases this is the only available MAC address, this leaves
Netty using a random machine ID instead of using a perfectly valid
machine ID from the locally-adminstered address.
Modifications:
This commit modifies the MAC address logic so that the empty MAC address
is not preferred over a locally-administered address. This commit also
simplifies the comparison logic here.
Result:
Empty MAC addresses will not be preferred over locally-administered
addresses thus permitting the default machine ID to be the
locally-adminstered MAC address if it is the only available MAC address.
Motivation:
codec-http2 couples the dependency tree state with the remainder of the stream state (Http2Stream). This makes implementing constraints where stream state and dependency tree state diverge in the RFC challenging. For example the RFC recommends retaining dependency tree state after a stream transitions to closed [1]. Dependency tree state can be exchanged on streams in IDLE. In practice clients may use stream IDs for the purpose of establishing QoS classes and therefore retaining this dependency tree state can be important to client perceived performance. It is difficult to limit the total amount of state we retain when stream state and dependency tree state is combined.
Modifications:
- Remove dependency tree, priority, and weight related items from public facing Http2Connection and Http2Stream APIs. This information is optional to track and depends on the flow controller implementation.
- Move all dependency tree, priority, and weight related code from DefaultHttp2Connection to WeightedFairQueueByteDistributor. This is currently the only place which cares about priority. We can pull out the dependency tree related code in the future if it is generally useful to expose for other implementations.
- DefaultHttp2Connection should explicitly limit the number of reserved streams now that IDLE streams are no longer created.
Result:
More compliant with the HTTP/2 RFC.
Fixes https://github.com/netty/netty/issues/6206.
[1] https://tools.ietf.org/html/rfc7540#section-5.3.4
Motivation:
A testing goof in 7c630fe introduced a binary incompatibility when the old Promise-specific `add` and `addAll` methods in PromiseCombiner were generalized to accept `Futures`.
Modification:
- Restore (but mark as `@Deprecated`) old PromiseCombiner methods.
- Fixed a couple minor documentation typos because sure why not.
Result:
`PromiseCombiner` is binary-compatible with previous versions of Netty.
Motivation:
When an empty hostname is used in DnsNameResolver.resolve*(...) it will never notify the future / promise. The root cause is that we not correctly guard against errors of IDN.toASCII(...) which will throw an IllegalArgumentException when it can not parse its input. That said we should also handle an empty hostname the same way as the JDK does and just use "localhost" when this happens.
Modifications:
- If the try to resolve an empty hostname we use localhost
- Correctly guard against errors raised by IDN.toASCII(...) so we will always noify the future / promise
- Add unit test.
Result:
DnsNameResolver.resolve*(...) will always notify the future.
Motivation:
Currently Netty does not wrap socket connect, bind, or accept
operations in doPrivileged blocks. Nor does it wrap cases where a dns
lookup might happen.
This prevents an application utilizing the SecurityManager from
isolating SocketPermissions to Netty.
Modifications:
I have introduced a class (SocketUtils) that wraps operations
requiring SocketPermissions in doPrivileged blocks.
Result:
A user of Netty can grant SocketPermissions explicitly to the Netty
jar, without granting it to the rest of their application.
Motivation:
Replacing System.err during Slf4JLoggerFactory construction is problematic as another class may optain the System.err reference before we set it back to the original value.
Modifications:
Remove code that temporary replaced System.err.
Result:
Fixes [#6212].
Motivation:
Pattern matching not necessary for number parsing.
Modification:
Removed pattern matching for number parsing and removed unnecessary toLowerCase() operation.
Result:
No static variable with pattern, removed unnecessary matching operation and toLowerCase() operation.
Motivation:
PlatformDependent* contains some methods that are not used and some other things that can be cleaned-up.
Modifications:
- Remove unused methods
- cleanup
Result:
Code cleanup.
Motivation:
The HttpProxyHandler is expected to be capable of issuing a valid CONNECT request for a tunneled connection to an IPv6 host.
Modifications:
- Correctly format the IPV6 address.
- Add unit tests
Result:
HttpProxyHandler works with IPV6 as well. Fixes [#6152].
Motivation:
When DefaultHttp2Connection removes a stream it iterates over all children and adds them as children to the parent of the stream being removed. This process may remove elements from the child map while iterating without using the iterator's remove() method. This is generally unsafe and may result in an undefined iteration.
Modifications:
- We should use the Iterator's remove() method while iterating over the child map
Result:
Fixes https://github.com/netty/netty/issues/6163
Motivation:
[#6153] reports an endless loop that existed in the Recycler, while this was fixed adding a few asserts to ensure this remains fixed is a good thing. Beside this we also should ensure this can not escape the constructor to avoid unsafe publication.
Modifications:
- Add asserts
- Fix unsafe publication
Result:
More correct code.
Motivation:
`scavengeSome()` has a corner case: when setting `cursor` to `head`, `this.prev` may point to the tail of the `WeakOrderQueue` linked list. Then it's possible that the following while loop will link the tail to the head, and cause endless loop.
I made a reproducer in 36522e7b72 . The unit test will just run forever. Unfortunately, I cannot change it to a unit test because it needs to add some codes to `scavengeSome` to control the execution flow.
Modification:
Set `prev` to null when setting `cursor` to `head` in `scavengeSome`
Result:
Fixes#6153.
Motivation:
InternalThreadLocalMap.arrayList returns a new ArrayList every time it's called that defeats the purpose of having a reusable ArrayList.
Modification:
Modified InternalThreadLocalMap.arrayList to create an ArrayList only if arrayList field is NULL.
Result:
InternalThreadLocalMap.arrayList now creates a reusable ArrayList only if arrayList field is NULL.
Motivation:
We used a MPSC queue in ThreadDeathWatcher and checked if it empty via isEmpty() from multiple threads if very unlucky. Depending on the implementation this is not safe and may even produce things like live-locks.
Modifications:
Change to use a MPMC queue.
Result:
No more risk to run into issues when multiple threads call watch(...) / unwatch(...) concurrently.
Motivation:
DefaultChannelId provides a regular expression which validates if a user provided MAC address is valid. This regular expression may allow invalid MAC addresses and also not allow valid MAC addresses.
Modifications:
- Introduce a MacAddressUtil#parseMac method which can parse and validate the MAC address at the same time. The regular expression check before hand is additional overhead if we have to parse the MAC address.
Result:
Fixes https://github.com/netty/netty/issues/6132.
Motivation:
`PromiseCombiner` is really handy, but it's not obvious how to use it from its existing documentation/method signatures.
Modification:
- Added javadoc comments to explain the theory of operation of `PromiseCombiner`.
- Generalized `PromiseCombiner` to work with `Futures` so it's clearer that the things for which it's listening won't be modified.
Result:
`PromiseCombiner` is easier to understand.
Motivation:
When profiling it is sometimes needed to still have the native library file avaible. We should allow to disable the explicit deletion and just delete it when the JVM stops.
This is related to #6110
Modifications:
Add io.netty.native.deleteLibAfterLoading system property which allows to disable the explicit delete after laoding
Result:
Possible to profile native libraries better.
Motivation:
In later Java8 versions our Atomic*FieldUpdater are slower then the JDK implementations so we should not use ours anymore. Even worse the JDK implementations provide for example an optimized version of addAndGet(...) using intrinsics which makes it a lot faster for this use-case.
Modifications:
- Remove methods that return our own Atomic*FieldUpdaters.
- Use the JDK implementations everywhere.
Result:
Faster code.
Motivation:
c2f4daa739 added a unit test but used a too small test timeout.
Modifications:
Increase timeout.
Result:
Test should have enough time to complete on the CI.
Motivation:
InternalLoggerFactory either sets a default logger factory
implementation based on the logging implementations on the classpath, or
applications can set a logger factory explicitly. If applications wait
too long to set the logger factory, Netty will have already set a logger
factory leading to some objects using one logging implementation and
other objets using another logging implementation. This can happen too
if the application tries to set the logger factory twice, which is
likely a bug in the application. Yet, the Javadocs for
InternalLoggerFactory warn against this saying that
InternalLoggerFactory#setLoggerFactory "should be called as early as
possible and shouldn't be called more than once". Instead, Netty should
guard against this.
Modications:
We replace the logger factory field with an atomic reference on which we
can do CAS operations to safely guard against it being set twice. We
also add an internal holder class that captures the static interface of
InternalLoggerFactory that can aid in testing.
Result:
The logging factory can not be set twice, and applications that want to
set the logging factory must do it before any Netty classes are
initialized (or the default logger factory will be set).
Motivation:
We need to ensure the tracked object can not be GC'ed before ResourceLeak.close() is called as otherwise we may get false-positives reported by the ResourceLeakDetector. This can happen as the JIT / GC may be able to figure out that we do not need the tracked object anymore and so already enqueue it for collection before we actually get a chance to close the enclosing ResourceLeak.
Modifications:
- Add ResourceLeakTracker and deprecate the old ResourceLeak
- Fix some javadocs to correctly release buffers.
- Add a unit test for ResourceLeakDetector that shows that ResourceLeakTracker has not the problems.
Result:
No more false-positives reported by ResourceLeakDetector when ResourceLeakDetector.track(...) is used.
Motivation:
Java9 will be released soon so we should ensure we can compile netty with Java9 and run all our tests. This will help to make sure Netty will be usable with Java9.
Modification:
- Add some workarounds to be able to compile with Java9, note that the full profile is not supported with Java9 atm.
- Remove some usage of internal APIs to be able to compile on java9
- Not support Alpn / Npn and so not run the tests when using Java9 for now. We will do a follow up PR to add support.
Result:
Its possible to build netty and run its testsuite with Java9.
Motivation:
42fba015ce changed the implemention of ResourceLeakDetector to improve performance. While this was done a branch was missed that can be removed. Beside this using a Boolean as value for the ConcurrentMap is sub-optimal as when calling remove(key, value) an uncessary instanceof check and cast is needed on each removal.
Modifications:
- Remove branch which is not needed anymore
- Replace usage of Boolean as value type of the ConcurrentMap and use our own special type which only compute hash-code one time and use a == operation for equals(...) to reduce overhead present when using Boolean.
Result:
Faster and cleaner ResourceLeakDetector.
Motivation:
Netty has a flag (io.netty.noUnsafe) for specifying to Netty to not be
unsafe. Yet, when initializing PlatformDependent0, Netty still tries to
be unsafe. For application that specify to Netty to not be unsafe and
run under a security manager, this can lead to an obnoxious (debug
level) stack trace. Since Netty was told not to be unsafe, Netty should
not try to be unsafe.
Modifications:
The initialization logic in PlatformDependent0 should take into account
that Netty was told not to be unsafe. This means that we need to
initialize PlatformDependent#IS_EXPLICIT_NO_UNSAFE as soon as possible,
before the static initializer for PlatformDependent0 has a chance to
run. Thus the following modifications are made:
- initialize PlatformDependent#IS_EXPLICIT_NO_UNSAFE before any other
code in PlatformDependent causes PlatformDependent0 to initialize
- expose the value of PlatformDependent#IS_EXPLICIT_NO_UNSAFE for
reading in PlatformDependent0
- take the value of PlatformDependent#IS_EXPLICIT_NO_UNSAFE into
account in PlatformDependent0
Result:
Netty does not try to be unsafe when told not to be unsafe.
Motivation:
For applications that set their own logger factory, they want that
logger factory to be the one logger factory. Yet, Netty eagerly
initializes this and then triggers initialization of other classes
before the application has had a chance to set its preferred logger
factory.
Modifications:
With this commit there are two key changes:
- Netty does not attempt to eagerly initialize the default logger
factory, only doing so if the application layer above Netty has not
already set a logger factory
- do not eagerly initialize unrelated classes from the logger factory;
while the motivation behind this was to initialize ThreadLocalRandom
as soon as possible in case it has to block reading from /dev/random,
this can be worked around for applications where it is problematic by
setting securerandom.source=file:/dev/urandom in their Java system
security policy (no, it is not less secure; do not even get me
started on myths about /dev/random)
Result:
Netty uses the logger factory that the application prefers, and does not
initialize unrelated classes.
Motivation:
PlatformDependent#getSystemClassLoader may throw a wide variety of exceptions based upon the environment. We should handle all exceptions and continue initializing the slow path if an exception occurs.
Modifications:
- Catch Throwable in cases where PlatformDependent#getSystemClassLoader is used
Result:
Fixes https://github.com/netty/netty/issues/6038
Motiviation:
We used ReferenceCountUtil.releaseLater(...) in our tests which simplifies a bit the releasing of ReferenceCounted objects. The problem with this is that while it simplifies stuff it increase memory usage a lot as memory may not be freed up in a timely manner.
Modifications:
- Deprecate releaseLater(...)
- Remove usage of releaseLater(...) in tests.
Result:
Less memory needed to build netty while running the tests.
Motivation:
00fc239995 introduced a change to HashedWheelTimerTest which attempted to wait for an explicit event notification until more timer events can be added. However HashedWheelTimer will execute the timer Runnable before removing it from the queue and decrementing the total count. This make it difficult for users to know when it is safe to add another timer task as the limit is approached.
Modifications:
- HashedWheelTimer should remove the timer Runnable before executing the task.
Result:
Users can more reliably add new timers when the limit is reached and HashedWheelTimerTest will no longer fail spuriously due to this race condition.
Motivation:
If a stream is not able to send any data (flow control window for the stream is exhausted) but has descendants who can send data then WeightedFairQueueByteDistributor may incorrectly modify the pseudo time and also double add the associated state to the parent's priority queue. The pseudo time should only be modified if a node is moved in the priority tree, and not if there happens to be no active streams in its descendent tree and a descendent is moved (e.g. removed from the tree because it wrote all data and the last data frame was EOS). Also the state objects for WeightedFairQueueByteDistributor should only appear once in any queue. If this condition is violated the pseudo time accounting would be biased at and assumptions in WeightedFairQueueByteDistributor would be invalidated.
Modifications:
- WeightedFairQueueByteDistributor#isActiveCountChangeForTree should not allow re-adding to the priority queue if we are currently processing a node in the distribution algorithm. The distribution algorithm will re-evaluate if the node should be re-added on the tail end of the recursion.
Result:
Fixes https://github.com/netty/netty/issues/5980
Motivation:
HashWheelTimerTest has busy/wait and sleep statements which are not necessary. We also depend upon a com.google.common.base.Supplier which isn't necessary.
Modifications:
- Remove buys wait loops and timeouts where possible
Result:
HashWheelTimerTest more explicit in verifying conditions and less reliant on wait times.
Motivation:
If the rate at which new timeouts are created is very high and the created timeouts are not cancelled, then the JVM can crash because of out of heap space. There should be a guard in the implementation to prevent this.
Modifications:
The constructor of HashedWheelTimer now takes an optional max pending timeouts parameter beyond which it will reject new timeouts by throwing RejectedExecutionException.
Result:
After this change, if the max pending timeouts parameter is passed as constructor argument to HashedWheelTimer, then it keeps a track of pending timeouts that aren't yet expired or cancelled. When a new timeout is being created, it checks for current pending timeouts and if it's equal to or greater than provided max pending timeouts, then it throws RejectedExecutionException.
Motivation:
PlatformDependent0 should not be referenced directly when sun.misc.Unsafe is unavailable.
Modifications:
Guard byteArrayBaseOffset with hasUnsafe check.
Result:
PlatformDependent can be initialized when sun.misc.Unsafe is unavailable.
Motivation:
ResourceLeakDetector shows two main problems, racy access and heavy lock contention.
Modifications:
This PR fixes this by doing two things:
1. Replace the sampling counter with a ThreadLocalRandom. This has two benefits.
First, it makes the sampling ration no longer have to be a power of two. Second,
it de-noises the continuous races that fight over this single value. Instead,
this change uses slightly more CPU to decide if it should sample by using TLR.
2. DefaultResourceLeaks need to be kept alive in order to catch leaks. The means
by which this happens is by a singular, doubly-linked list. This creates a
large amount of contention when allocating quickly. This is noticeable when
running on a multi core machine.
Instead, this uses a concurrent hash map to keep track of active resources
which has much better contention characteristics.
Results:
Better concurrent hygiene. Running the gRPC QPS benchmark showed RLD taking about
3 CPU seconds for every 1 wall second when runnign with 12 threads.
There are some minor perks to this as well. DefaultResourceLeak accounting is
moved to a central place which probably has better caching behavior.
Motivation:
PlatformDependent has a hash code algorithm which utilizes UNSAFE for performance reasons. This hash code algorithm must also be consistent with CharSequence objects that represent a collection of ASCII characters. In order to make the UNSAFE versions and CharSequence versions the endianness should be taken into account. However the big endian code was not correct in a few places.
Modifications:
- Correct bugs in PlatformDependent class related to big endian ASCII hash code computation
Result:
Fixes https://github.com/netty/netty/issues/5925
Motivation:
the build doesnt seem to enforce this, so they piled up
Modifications:
removed unused import lines
Result:
less unused imports
Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
Motivation:
ResourceLeakDetector reports leak for first call to open(obj) as its leakCheckCnt starts with value 0 and increment subsequently. with value of leakCheckCnt =0, it always returns ResourceLeak. Our application calls ResourceLeakDetector.open(obj) to validate Leak and it fails at very first call even though there is no leak in application.
Modifications:
ResourceLeakDetector.leakCheckCnt value will not be 0 while deriving leak and it will not return incorrect value of ResourceLeak.
Result:
Fix false leak report on first call on ResourceLeakDetector.
Motivation:
NetUtil.bytesToIpAddress does not correctly translate IPv4 address to String. Also IPv6 addresses may not follow minimization conventions when converting to a String (see rfc 5952).
Modifications:
- NetUtil.bytesToIpAddress should correctly handle negative byte values for IPv4
- NetUtil.bytesToIpAddress should leverage existing to string conversion code in NetUtil
Result:
Fixes https://github.com/netty/netty/issues/5821
Motivation:
At the moment we log very confusing messages when trying to load a native library which kind of suggest that the whole loading process failed even if just one mechanism failed and the library could be loaded at the end.
Modifications:
Make the mesage less confusing and also log a successful load of the native library.
Result:
Less confusing logs.
Motivation:
Since netty shaded JCTools the OSGi manifest no longer is correct. It claims to
have an optional import "org.jctools.queues;resolution:=optional,org.jctools.qu
eues.atomic;resolution:=optional,org.jctools.util;resolution:=optional"
However since it is shaded, this is no longer true.
This was noticed when making JCTools a real bundle and netty resolved it as
optional import.
Modifications:
Modify the generated manifest by no longer analyzing org.jctools for imports.
A manual setting of sun.misc as optional was required.
Result:
Netty OSGi bundle will no longer interfere with a JCTools bundle.
Motivation:
To make it easier to debug why notification of a promise failed we should log extra info and make it consistent.
Modifications:
- Create a new PromiseNotificationUtil that has static methods that can be used to try notify a promise and log.
- Reuse this in AbstractChannelHandlerContext, ChannelOutboundBuffer and PromiseNotifier
Result:
Easier to debug why a promise could not be notified.
Motivation:
We can share the code in retain() and retain(...) and also in release() and release(...).
Modifications:
Share code.
Result:
Less duplicated code.
Motivation:
Windows refuses to load a .DLL file when it's opened by other process.
Recent modification in NativeLibraryLoader causes NativeLibraryLoader to
attempt to load a .DLL before closing its OutputStream. As a result,
loading a .DLL file in Windows always fails.
Modifications:
Close the OutputStream explicitly before loading a shared library.
Result:
Native library loading in Windows works again.
Motivation:
SystemPropertyUtil requires InternalLoggerFactory requires ThreadLocalRandom requires SystemPropertyUtil. This can lead to a dead-lock.
Modifications:
Ensure ThreadLocalRandom does not require SystemPropertyUtil during initialization.
Result:
No more deadlock possible.
Motivation:
Sometimes it is useful to be able to wrap an existing memory address (a.k.a pointer) and create a ByteBuf from it. This way its easier to interopt with other libraries.
Modifications:
Add a new Unpooled.wrappedBuffer(....) method that takes a memory address.
Result:
Be able to wrap an existing memory address into a ByteBuf.
Motivation:
As the issue #5539 say, the OpenSsl.class will throw `java.lang.UnsatisfiedLinkError: org.apache.tomcat.jni.Library.version(I)I` when it is invoked. This path try to resolve the problem by modifying the native library loading logic of OpenSsl.class.
Modifications:
The OpenSsl.class loads the tcnative lib by `NativeLibraryLoader.loadFirstAvailable()`. The native library will be loaded in the bundle `netty-common`'s ClassLoader, which is diff with the native class's ClassLoader. That is the root cause of throws `UnsatisfiedLinkError` when the native method is invoked.
So, it should load the native library by the its bundle classloader firstly, then the embedded resources if failed.
Result:
First of all, the error threw by native method problem will be resolved.
Secondly, the native library should work as normal in non-OSGi env. But, this is hard. The loading logic of `Library.class` in `netty-tcnative` bundle is simple: try to load the library in PATH env. If not found, it falls back to the originally logic `NativeLibraryLoader.loadFirstAvailable()`.
Signed-off-by: XU JINCHUAN <xsir@msn.com>
Motivation:
When try to call Cleaner.run() via reflection on Java9 you may see an IllegalAccessException.
Modifications:
Just cast the Cleaner to Runnable to prevent IllegalAccessException to be raised.
Result:
Free direct buffers also work on Java9+ as expected.
Motivation:
Our current strategy in NativeLibraryLoader is to mark the temporary .so file to be deleted on JVM exit. This has the drawback to not delete the file in the case the JVM dies or is killed.
Modification:
Just directly try to delete the file one we loaded the native library and if this fails mark the file to be removed once the JVM exits.
Result:
Less likely to have temporary files still on the system in case of JVM kills.
Motivation:
According to the Oracle documentation:
> java.net.preferIPv4Stack (default: false)
>
> If IPv6 is available on the operating system, the underlying native
> socket will be an IPv6 socket. This allows Java applications to connect
> to, and accept connections from, both IPv4 and IPv6 hosts.
>
> If an application has a preference to only use IPv4 sockets, then this
> property can be set to true. The implication is that the application
> will not be able to communicate with IPv6 hosts.
which means, if DnsNameResolver returns an IPv6 address, a user (or
Netty) will not be able to connect to it.
Modifications:
- Move the code that retrieves java.net.prefer* properties from
DnsNameResolver to NetUtil
- Add NetUtil.isIpV6AddressesPreferred()
- Revise the API documentation of NetUtil.isIpV*Preferred()
- Set the default resolveAddressTypes to IPv4 only when
NetUtil.isIpv4StackPreferred() returns true
Result:
- Fixes#5657
Motiviation:
Preparing platform dependent code for using unsafe requires executing
privileged code. The privileged code for initializing unsafe is executed
in a manner that would require all code leading up to the initialization
to have the requisite permissions. Yet, in a restrictive environment
(e.g., under a security policy that only grants the requisite
permissions the Netty common jar but not to application code triggering
the Netty initialization), then initializing unsafe will not succeed
even if the security policy would otherwise permit it.
Modifications:
This commit marks the necessary blocks as privileged. This enables
access to the necessary resources for initialization unsafe. The idea is
that we are saying the Netty code is trusted, and as long as the Netty
code has been granted the necessary permissions, then we will allow the
caller access to these resources even though the caller itself might not
have the requisite permissions.
Result:
Unsafe can be initialized in a restrictive security environment.
Motivation:
Its not clear that the capacity is per thread.
Modifications:
Rename system property to make it more clear that the recycler capacity is per thread.
Result:
Less confusing.
Motivation:
We not need to do an extra conditional check in retain(...) as we can just check for overflow after we did the increment.
Modifications:
- Remove extra conditional check
- Add test code.
Result:
One conditional check less.
Motivation:
If the user uses 0 as quiet period we should shutdown without any delay if possible.
Modifications:
Ensure we not introduce extra delay when a shutdown quit period of 0 is used.
Result:
EventLoop shutdown as fast as expected.
Current constant pool holds all data within HashMap and all access to this HashMap is done via synchronized blocks. Thus CuncurrentHashMap will be here more efficient as it designed for higher throughput and will use less locks. Also valueOf method was not very efficient as it performed get operation 2 times.
Modifications :
HashMap -> PlatformDependent.newConcurrentHashMap().
ValueOf is more efficient now, threadsafe and uses less locks. Downside is that final T tempConstant = newConstant(nextId(), name); could be called more than 1 time during high contention.
Result :
Less contention, cleaner code.
Motivation:
We offer DefaultEventExecutorGroup as an EventExecutorGroup which return OrderedEventExecutor and so provide strict ordering of event execution. One limitations of this implementation is that each contained DefaultEventExecutor will always be tied to a single thread, which can lead to a very unbalanced execution as one thread may be super busy while others are idling.
Modifications:
- Add NonStickyEventExecutorGroup which can be used to wrap another EventExecutorGroup (like UnorderedThreadPoolEventExecutor) and expose ordering while not be sticky with the thread that is used for a given EventExecutor. This basically means that Threads may change between execution of tasks for an EventExecutor but ordering is still guaranteed.
Result:
Better utalization of threads in some use-cases.
Motivation:
To better restrict resource usage we should limit the number of WeakOrderQueue instances per Thread. Once this limit is reached object that are recycled from a different Thread then the allocation Thread are dropped on the floor.
Modifications:
Add new system property io.netty.recycler.maxDelayedQueuesPerThread and constructor that allows to limit the max number of WeakOrderQueue instances per Thread for Recycler instance. The default is 2 * cores (the same as the default number of EventLoop instances per EventLoopGroup).
Result:
Better way to restrict resource / memory usage per Recycler instance.
Motivation:
Commons logger is dead and not updated for more than 2 years. #5615.
Modifications:
Added @Deprecated annotation to CommonsLoggerFactory and CommonsLogger.
Result:
Commons logger now deprecated.
Motivation:
When Netty components are initialized, Netty attempts to determine if it
has access to unsafe. If Netty is not able to access unsafe (because of
security permissions, or because the JVM was started with an explicit
flag to tell Netty to not look for unsafe), Netty logs an info-level
message that looks like a warning:
Your platform does not provide complete low-level API for accessing
direct buffers reliably. Unless explicitly requested, heap buffer will
always be preferred to avoid potential system unstability.
This log message can appear in applications that depend on Netty for
networking, and this log message can be scary to end-users of such
platforms. This log message should not be emitted if the application was
started with an explicit flag telling Netty to not look for unsafe.
Modifications:
This commit refactors the unsafe detection logic to expose whether or
not the JVM was started with a flag telling Netty to not look for
unsafe. With this exposed information, the log message on unsafe being
unavailable can be modified to not be emitted when Netty is explicitly
told to not look for unsafe.
Result:
No log message is produced when unsafe is unavailable because Netty was
told to not look for it.
Motivation:
AbstractConstant.compareTo seems complex and hard to understand. Also it allocates unnecessary 1 byte in direct buffer and holds unnecessary pointer to this byte butter.
Modifications:
uniquifier (id) variable now initialized during Constant creation and thus no need in volatile and no need in uniquifier() method as it could be easily replaced with AtomicLong.
Result:
Every Constant instance now consumes less bytes for pointer, don't consume anything in direct buffer.
Motivation:
Old code doesn't needed anymore due to logger factory initialization.
Modifications :
Removed static section and useless static variables;
Logging concatenations replaced with placeholders.
Result:
Cleaner, simpler code doing the same
Motivation:
Some usages of findNextPositivePowerOfTwo assume that bounds checking is taken care of by this method. However bounds checking is not taken care of by findNextPositivePowerOfTwo and instead assert statements are used to imply the caller has checked the bounds. This can lead to unexpected non power of 2 return values if the caller is not careful and thus invalidate any logic which depends upon a power of 2.
Modifications:
- Add a safeFindNextPositivePowerOfTwo method which will do runtime bounds checks and always return a power of 2
Result:
Fixes https://github.com/netty/netty/issues/5601
Motivation:
NewLine initializing is complex, with unnecessary allocations and non-standard.
Static section is overloaded with StringBuilders for simple "s" + "s" concatenation pattern that compiler optimizes perfectly.
Modifications:
NewLine initializing replaced with standard System.getProperty("line.separator").
Removed StringBuilders in static section.
Result:
Less complex code.
Motivation:
When we try to close the Channel due a timeout we need to ensure we not log if the notification of the promise fails as it may be completed in the meantime.
Modifications:
Add another constructor to ChannelPromiseNotifier and PromiseNotifier which allows to log on notification failure.
Result:
No more miss-leading logs.
Motivation:
At the moment the Recyler is very sensitive to allocation bursts which means that if there is a need for X objects for only one time these will most likely end up in the Recycler and sit there forever as the normal workload only need a subset of this number.
Modifications:
Add a ratio which sets how many objects should be pooled for each new allocation. This allows to slowly increase the number of objects in the Recycler while not be to sensitive for bursts.
Result:
Less unused objects in the Recycler if allocation rate sometimes bursts.
Motivation:
Using Attribute.remove() and Attribute.getAndRemove() in a multi-threaded enviroment has its drawbacks. Make sure we document these.
Modifications:
Add javadocs and mark Attribute.remove() and Attribute.getAndRemove() as @Deprecated.
Result:
Hopefully less suprising behaviour.
Motivation:
We used a very high number for DEFAULT_INITIAL_MAX_CAPACITY (over 200k) which is not very relastic and my lead to very surprising memory usage if allocations happen in bursts.
Modifications:
Use a more sane default value of 32k
Result:
Less possible memory usage by default
Motivation:
AbstractReferenceCounted as independent conditional statements to check the bounds of the retain IllegalReferenceCountException condition. One of the exceptions also uses the incorrect increment.
Modifications:
- Combined independent conditional checks into 1 where possible
- Correct IllegalReferenceCountException with incorrect increment
- Remove the subtract to check for overflow and re-use the addition and check for overflow to remove 1 arithmetic operation (see http://docs.oracle.com/javase/specs/jls/se7/html/jls-15.html#jls-15.18.2)
Result:
AbstractReferenceCounted has less independent branch statements and more correct IllegalReferenceCountException. Compilation size of AbstractReferenceCounted.retain() is reduced from 58 bytes to 47 bytes.
Motivation:
We saw some sporadic test failures for GlobalEventExecutorTest.testAutomaticStartStop test. This is caused parallel execution of tests in combination with assert checks that will be affected.
Modifications:
Remove fragile assert checks.
Result:
No more sporadic test failures
Motivation:
We use a shared capacity per Stack for all its WeakOrderQueue elements. These relations are stored in a WeakHashMap to allow dropping these if memory pressure arise. The problem is that we not "reclaim" previous reserved space when this happens. This can lead to a Stack which has not shared capacity left which then will lead to an AssertError when we try to allocate a new WeakOderQueue.
Modifications:
- Ensure we never throw an AssertError if we not have enough space left for a new WeakOrderQueue
- Ensure we reclaim space when WeakOrderQueue is collected.
Result:
No more AssertError possible when new WeakOrderQueue is created and also correctly reclaim space that was reserved from the shared capacity.
Motivation:
Due an implementation flaw in DefaultAttributeMap it was possible that an attribute and its stored value/key could not be collected until the DefaultAttributeMap could be collected. This can lead to unexpected memory usage and strong reachability of objects that should be collected.
Modifications:
Use an special empty DefaultAttribute as head of the each bucket which will not store any key / value. With this change everything can be collected as expected as we not use any DefaultAttribute created by the user as head of a bucket.
Result:
DefaultAttributeMap does not store user data and thus the lifetime of this user data is not tied to the lifetime of the DefaultAttributeMap.
Motivation:
Commit afafadd3d7 introduced a change which stored the Stack in the WeakOrderQueue as field. This unfortunally had the effect that it was not removed from the WeakHashMap anymore as the Stack also is used as key.
Modifications:
Do not store a reference to the Stack in WeakOrderQueue.
Result:
WeakOrderQueue can be collected correctly again.
Motivation:
When resolving localhost on Windows where the hosts file does not contain a localhost entry by default, the resulting InetAddress object returned by the resolver does not have the hostname set so that getHostName returns the ip address 127.0.0.1. This behaviour is inconsistent with Windows where the hosts file does contain a localhost entry and with Linux in any case. It breaks at least some unit tests.
Modifications:
Create the LOCALHOST4 and LOCALHOST6 objects with hostname localhost in addition to the address.
Add unit test domain localhost to DnsNameResolverTest to check the resolution of localhost with ipv4 at least.
Result:
The resolver returns a InetAddress object for localhost with the hostname localhost in all cases.
Motivation:
The Java version is used for platform dependent logic. Yet, the logic
for acquiring the Java version requires special permissions (the runtime
permission "getClassLoader") that some downstream projects will never
grant. As such, these projects are doomed to have Netty act is their
Java major version is six. While there are ways to maintain the same
logic without requiring these special permissions, the logic is
needlessly complicated because it relies on loading classes that exist
in version n but not version n - 1. This complexity can be removed. As a
bonanza, the dangerous permission is no longer required.
Modifications:
Rather than attempting to load classes that exist in version n but not
in version n - 1, we can just parse the Java specification version. This
only requires a begign property (property permission
"java.specification.version") and is simple.
Result:
Acquisition of the Java version is safe and simple.
Motivation:
The clean method in java.base/jdk.internal.ref.Cleaner is not accessible
to methods outside java.base. This prevents Cleaner0.freeDirectBuffer
from actually calling the clean method on JDK9.
The issue could have been caught earlier if Cleaner0 is initialized when
PlatformDependent0 is initialized and logging statements in the static
initializer in Cleaner0 would be close to the logging statements in the
static initializer in PlatformDependent0.
Modifications:
Try casting the cleaner obtained from a ByteBuffer to Runnable and use
Runnable.run if possible. All Cleaners in JDK9 implements Runnable. Fall
back to the clean method if the cleaner does not implement Runnable.
The fallback preserves the behavior on JDK8 and earlier.
Try to free the direct ByteBuffer allocated during static initialization
of PlatformDependent0. This cause Cleaner0 to be initialized when
PlatformDependent0 is initialized, and logging statements from the
static initializers will be close together.
Result:
Cleaner0.freeDirectBuffer works as intended on JDK9 and logging shows
that Cleaner0.freeDirectBuffer works as intended.
Motivation:
A recent change to DefaultThreadFactory modified it so that it is sticky
with respect to thread groups. In particular, this change made it so
that DefaultThreadFactory would hold on to the thread group that created
it, and then use that thread group to create threads.
This can have problematic semantics since it can lead to violations of a
tenet of thread groups that a thread can only modify threads in its own
thread group and descendant thread groups. With a sticky thread group, a
thread triggering the creation of a new thread via
DefaultThreadFactory#newThread will be modifying a thread from the
sticky thread group which will not necessarily be its own nor a
descendant thread group. When a security manager is in place that
enforces this requirement, these modifications are now impossible. This
is especially problematic in the context of Netty because certain global
singletons like GlobalEventExecutor will create a
DefaultThreadFactory. If all DefaultThreadFactory instances are sticky
about their thread groups, it means that submitting tasks to the
GlobalEventExecutor singleton can cause a thread to be created from the
DefaultThreadFactory sticky thread group, exactly the problem with
DefaultThreadFactory being sticky about thread groups. A similar problem
arises from the ThreadDeathWatcher.
Modifications:
This commit modifies DefaultThreadFactory so that a null thread group
can be set with the behavior that all threads created by such an
instance will inherit the default thread group (the thread group
provided by the security manager if there is one, otherwise the thread
group of the creating thread). The construction of the instances of
DefaultThreadFactory used by the GlobalEventExecutor singleton and
ThreadDeathWatcher are modified to use this behavior. Additionally, we
also modify the chained constructor invocations of the
DefaultThreadFactory that do not have a parameter to specify a thread
group to use the thread group from the security manager is available,
otherwise the creating thread's thread group. We also add unit tests
ensuring that all of this behavior is maintained.
Result:
It will be possible to have DefaultThreadFactory instances that are not
sticky about the thread group that led to their creation. Instead,
threads created by such a DefaultThreadFactory will inherit the default
thread group which will either be the thread group from the security
manager or the current thread's thread group.
Motivation:
Currently, the recycler max capacity it's only enforced on the
thread-local stack which is used when the recycling happens on the
same thread that requested the object.
When the recycling happens in a different thread, then the objects
will be queued into a linked list (where each node holds N objects,
default=16). These objects are then transfered into the stack when
new objects are requested and the stack is empty.
The problem is that the queue doesn't have a max capacity and that
can lead to bad scenarios. Eg:
- Allocate 1M object from recycler
- Recycle all of them from different thread
- Recycler WeakOrderQueue will contain 1M objects
- Reference graph will be very long to traverse and GC timeseems to be negatively impacted
- Size of the queue will never shrink after this
Modifications:
Add some shared counter which is used to manage capacity limits when recycle from different thread then the allocation thread. We modify the counter whenever we allocate a new Link to reduce the overhead of increment / decrement it.
Result:
More predictable number of objects mantained in the recycler pool.
Motivation:
This change is part of the change done in PR #5395 to provide an `AUTO_FLUSH` capability.
Splitting this change will enable to try other ways of implementing `AUTO_FLUSH`.
Modifications:
Two methods:
```java
void executeAfterEventLoopIteration(Runnable task);
boolean removeAfterEventLoopIterationTask(Runnable task);
```
are added to `SingleThreadEventLoop` class for adding/removing a task to be executed at the end of current/next iteration of this `eventloop`.
In order to support the above, a few methods are added to `SingleThreadEventExecutor`
```java
protected void afterRunningAllTasks() { }
```
This is invoked after all tasks are run for this executor OR if the passed timeout value for `runAllTasks(long timeoutNanos)` is expired.
Added a queue of `tailTasks` to `SingleThreadEventLoop` to hold all tasks to be executed at the end of every iteration.
Result:
`SingleThreadEventLoop` now has the ability to execute tasks at the end of an eventloop iteration.
Motivation:
Today when awaiting uninterruptibly on a default promise, a race
condition can lead to a missed signal. Quite simply, the check for
whether the condition holds is not made inside a lock before
waiting. This means that the waiting thread can enter the wait after the
promise has completed and will thus not be notified, thus missing the
signal. This leads to the waiting thread to enter a timed wait that will
only trip with the timeout elapses leading to unnecessarily long waits
(imagine a connection timeout, and the waiting thread missed the signal
that the connection is ready).
Modification:
This commit fixes this missed signal by checking the condition inside a
lock. We also add a test that reliably fails without the non-racy
condition check.
Result:
Timed uninterruptible waits on default promise will not race against the
condition and possibly wait longer than necessary.
Motivation:
ExecutorService.invoke*(...) methods may block by API definition. This can lead to deadlocks if called from inside the EventLoop in SingleThreadEventExecutor as it only has one Thread that does all the work.
Modifications:
Throw a RejectedExectionException if someone tries to call SingleThreadEventExecutor.invoke*(...) while in the EventLoop.
Result:
No more deadlock possible.
Motivation:
The current DnsNameResolver does not support search domains resolution. Search domains resolution is supported out of the box by the java.net resolver, making the DnsNameResolver not able to be a drop in replacement for io.netty.resolver.DefaultNameResolver.
Modifications:
The DnsNameResolverContext resolution has been modified to resolve a list of search path first when it is configured so. The resolve method now uses the following algorithm:
if (hostname is absolute (start with dot) || no search domains) {
searchAsIs
} else {
if (numDots(name) >= ndots) {
searchAsIs
}
if (searchAsIs wasn't performed or failed) {
searchWithSearchDomainsSequenciallyUntilOneSucceeds
}
}
The DnsNameResolverBuilder provides configuration for the search domains and the ndots value. The default search domains value is configured with the OS search domains using the same native configuration the java.net resolver uses.
Result:
The DnsNameResolver performs search domains resolution when they are present.
Motivation:
DefaultPromise has a listeners member variable which is volatile to allow for an optimization which makes notification of listeners less expensive when there are no listeners to notify. However this change makes all other operations involving the listeners member variable more costly. This optimization which requires listeners to be volatile can be removed to avoid volatile writes/reads for every access on the listeners member variable.
Modifications:
- DefaultPromise listeners is made non-volatile and the null check optimization is removed
Result:
DefaultPromise.listeners is no longer volatile.
Motivation:
In commit f984870ccc I made a change which operated under invalide assumption that tasks executed by an EventExecutor will always be processed in a serial fashion. This is true for SingleThreadEventExecutor sub-classes but not part of the EventExecutor interface contract.
Because of this change implementations of EventExecutor which not strictly execute tasks in a serial fashion may miss events before handlerAdded(...) is called. This is strictly speaking not correct as there is not guarantee in this case that handlerAdded(...) will be called as first task (as there is no ordering guarentee).
Cassandra itself ships such an EventExecutor implementation which has no strict ordering to spread load across multiple threads.
Modifications:
- Add new OrderedEventExecutor interface and let SingleThreadEventExecutor / EventLoop implement / extend it.
- Only expose "restriction" of skipping events until handlerAdded(...) is called for OrderedEventExecutor implementations
- Add ThreadPoolEventExecutor implementation which executes tasks in an unordered fashion. This is used in added unit test but can also be used for protocols which not expose an strict ordering.
- Add unit test.
Result:
Resurrect the possibility to implement an EventExecutor which does not enforce serial execution of events and be able to use it with the DefaultChannelPipeline.
Motivation:
DefaultPromise has a listeners member variable which is volatile to allow for an optimization which makes notification of listeners less expensive when there are no listeners to notify. However this change makes all other operations involving the listeners member variable more costly. This optimization which requires listeners to be volatile can be removed to avoid volatile writes/reads for every access on the listeners member variable.
Modifications:
- DefaultPromise listeners is made non-volatile and the null check optimization is removed
Result:
DefaultPromise.listeners is no longer volatile.
Motivation:
The logging statements in i.n.u.c.DefaultPromise do not emit the
caught Throwable when a Throwable is thrown while a listener is being
notified of completed or progressed operations.
Modifications:
This issue arises because the logging message has a single placeholder
but is passing two additional arguments, the second one being the
caught Throwable that is thus quietly not logged. We address this by
modifying the logging statements to ensure the caught Throwable is
logged. In this case, the preferred approach is to use the logger
override that accepts a message and a Throwable parameter since logger
implementations might have special handling for this case.
Result:
Log messages from i.n.u.c.DefaultPromise when a Throwable is thrown
while notifying a listener of completed or progressed operations will
contain the caught Throwable.
Motivation:
A race detector found that DefaultPromise.listeners is improperly synchronized [1].
Worst case a listener will not be executed when the promise is completed.
Modifications:
Make DefaultPromise.listeners a volatile.
Result:
Hopefully, DefaultPromise is more correct under concurrent execution.
[1] https://github.com/grpc/grpc-java/issues/2015
Motivation:
AsciiString.hashCode(o) , if "o" is a subString, the hash code is not always same, when netty’s version is 4.1.1.Final and jdk’s version is 1.6.
Modifications:
Use a test to assert hash codes are equal between a new string and any sub string (a part of a char array),If their values are equal.
Result:
Create a test method to AsciiStringCharacterTest.
Motivation:
Currently in the single threaded and global event executors when the scheduled task queue is drained, there is a call to hasScheduledTasks(). If there are scheduled tasks then the the code polls the queue for tasks. The poll method duplicates the exact logic of hasScheduledTasks(). This involves two calls to nanoTime when one seems sufficient.
Modifications:
Directly poll the queue for tasks and break if the task returned is null.
Result:
Should be no noticeable impact on functionality. Two calls to nanoTime have been coarsened into a single call.
Motivation:
Project Jigsaw in JDK9 has moved the direct byte buffer cleaner from
sun.misc.Cleaner to java.lang.ref.Cleaner$Cleanable. This cause the
current platform tests to throw a ClassNotFoundException, disabling the
use of direct byte buffer cleaners.
Modifications:
I use reflection to find the clean method in either sun.misc.Cleaner or
java.lang.ref.Cleaner$Cleanable.
Result:
Netty uses direct byte buffers on JDK9 as it already do on earlier JDKs.
