Motivation:
HpackHuffmanDecoder.Decoder did not do any bound-checking but just catched IndexOutOfBoundsException to detect if the array needs to grow. This can be very expensive because of fillInStackTrace()
Modifications:
Add proper bounds checking and grow the array if needed without catching IndexOutOfBoundsException.
Result:
Less overhead if the array needs to grow.
Motivation:
Depending on the use case it may make sense to increase or decrease the initial size of the buffer used during the HPACK huffman decode process. This is currently not exposed through the AbstractHttp2ConnectionHandlerBuilder.
Modifications:
- Add a method to AbstractHttp2ConnectionHandlerBuilder which allows the initial size of the buffer used during the HPACK huffman decode prcoess to be configured.
Result:
AbstractHttp2ConnectionHandlerBuilder provides more control of codec-http2 knobs.
Motivation:
AppendableCharSequence depends upon IndexOutOfBoundsException to trigger a resize operation under the assumption that the resize operation will be rare if the initial size guess is good. However if the initial size guess is not good then the performance will be more unpredictable and likely suffer.
Modifications:
- Check the position in AppendableCharSequence#append to determine if a resize is necessary
Result:
More predictable performance in AppendableCharSequence#append.
Motivation:
This allows netty to operate in 'transparent proxy' mode, intercepting connections
to other addresses by means of Linux firewalling rules, as per
https://www.kernel.org/doc/Documentation/networking/tproxy.txt
The original destination address can be obtained by referencing
ch.localAddress().
Modification:
Add methods similar to those for ipFreeBind, to set the IP_TRANSPARENT option.
Result:
Allows setting and getting of the IP_TRANSPARENT option, which allows retrieval of the ultimate socket address originally requested.
Motivation:
We should not force autoconf and compile as this will result in multiple executions and so slow down the build.
Modifications:
Remove force declarations
Result:
Faster build of native modules
Motivation:
When I run Netty micro benchmarks I get many warnings like:
WARNING: -Dio.netty.noResourceLeakDetection is deprecated. Use '-Dio.netty.leakDetection.level=simple' instead.
Modification:
-Dio.netty.noResourceLeakDetection replaced with -Dio.netty.leakDetection.level=disabled.
Result:
No warnings.
Motivation:
We need to use FQCN to prevent classloader issues for classes that are > Java6. This is a cleanup of ed5fcbb773.
Modifications:
Just remove the imports and use FQCN.
Result:
No classloader issues with java6
Motivation:
Commit 3c4dfed08a introduced a regression in handling buffers that have no memoryAddress.
Modifications:
Fix regression and also add unit tests.
Result:
It's possible again to write buffers without memory address.
Motivation:
We should allow to access the memoryAddress of the wrapped ByteBuf when using ReadOnlyByteBuf for peformance reasons. If a user act on a memoryAddress its his responsible anyway to do nothing "stupid".
Modifications:
Delegate to wrapped ByteBuf.
Result:
Less performance overhead for various operations and also when writing to a native transport (which needs the memoryAddress).
Motivations:
1. There are duplicated implementations of decoding hex strings. #6797
2. ByteBufUtil.HexUtil.decodeHexDump does not handle substring start
index properly and does not decode hex byte rigorously.
Modifications:
1. Function decodeHexByte is moved from QueryStringDecoder into ByteBufUtil.
2. ByteBufUtil.HexUtil.decodeHexDump is changed to use decodeHexByte.
3. Tests are Updated accordingly.
Result:
Fixed#6797 and made hex decoding functions more robust.
Motivation:
Docker's `--tmpfs` flag mounts the temp volume with `noexec` by default,
resulting in an UnsatisfiedLinkError. While this is good security
practice, it is a surprising failure from a seemingly innocuous flag.
Modifications:
Add a best-effort attempt in `NativeLibraryLoader` to detect when temp
files beng loaded cannot be executed even when execution permissions
are set, often because the `noexec` flag is set on the volume.
Requires numerous additional exclusions to the Animal Sniffer config
for Java7 POSIX permissions manipulation.
Result:
Fixes [#6678].
Motivation:
The current PROXY protocol implementation does not have support for optional Type-Length-Value fields. This pull requests adds the TLV values as specified in the PROXY protocol specification (http://www.haproxy.org/download/1.5/doc/proxy-protocol.txt) and adds support for arbitrary TLVs.
Modifications:
The existing HAProxyMessage implements an additional TLV reading operation. A small bug in the AF_UNIX reader which didn’t set the reader index correctly was also fixed.
Result:
The PROXY protocol supports TLVs
Motivation:
A `SeekAheadNoBackArrayException` used as check for `ByteBuf#hasArray`. The catch of exceptions carries a large overhead on stack trace filling, and this should be avoided.
Modifications:
- Remove the class `SeekAheadNoBackArrayException` and replace its usage with `if` statements.
- Use methods from `ObjectUtils` for better readability.
- Make private methods static where it make sense.
- Remove unused private methods.
Result:
Less of exception handling logic, better performance.
Motivation:
JdkZlibDecoder will allocate a new buffer when the previous buffer is filled with inflated data, but JZlibDecoder will attempt to use the same buffer by resizing. This leads to inconsistent results when these two decoders that are intended to be functionality equivalent.
Modifications:
- JdkZlibDecoder should attempt to resize and reuse the existing buffer instead of creating multiple buffers
Result:
Fixes https://github.com/netty/netty/issues/6804
Motivation:
If a full HttpResponse with a Content-Length header is encoded by the HttpContentEncoder subtypes the Content-Length header is removed and the message is set to Transfer-Encoder: chunked. This is an unnecessary loss of information about the message content.
Modifications:
- If a full HttpResponse has a Content-Length header, the header is adjusted after encoding.
Result:
Complete messages continue to have the Content-Length header after encoding.
Motivation:
If the destination buffer is completely filled during a call to OpenSslEngine#wrap(..) we may return NEED_UNWRAP because there is no data pending in the SSL buffers. However during a handshake if the SSL buffers were just drained, and filled up the destination buffer it is possible OpenSSL may produce more data on the next call to SSL_write. This means we should keep trying to call SSL_write as long as the destination buffer is filled and only return NEED_UNWRAP when the destination buffer is not full and there is no data pending in OpenSSL's buffers.
Modifications:
- If the handshake produces data in OpenSslEngine#wrap(..) we should return NEED_WRAP if the destination buffer is completely filled
Result:
OpenSslEngine returns the correct handshake status from wrap().
Fixes https://github.com/netty/netty/issues/6796.
Motivation:
QueryStringDecoder has several problems:
- doesn't decode correctly path part with `+` (plus) sign in it,
- doesn't cut a `fragment` (after `#`) from query string (see RFC 3986),
- doesn't work correctly with encoding,
- treat `%%` as a percent character escaping (it's don't described in RFC).
Modifications:
- leave `+` chars in a `path` part of uri string,
- ignore `fragment` part (after `#`),
- correctly work with encoding.
- don't treat `%%` as escaping for the `%`.
Result:
Fixed issues from #6745.
Motivation:
ChannelPipeline will happily add a handler to a closed Channel's pipeline and will call handlerAdded(...) but will not call handlerRemoved(...).
Modifications:
Check if pipeline was destroyed and if so not add the handler at all but propergate an exception.
Result:
Fixes [#6768]
Motivation:
Allow subclasses of HttpObjectEncoder other than HttpServerCodec to override the isContentAlwaysEmpty method
Modification:
Change the method visibility from package private to protected
Result:
Fixes#6761
Motivation:
We need to exclude the netty-tcnative classes from the all jar when building it as otherwise there may be classloader issues.
Modifications:
Add io/netty/internal/tcnative to the exclude list.
Result:
Fixes [#6791]
Motivation:
ByteBufUtil provides a hexDump method. For debugging purposes it is often useful to decode that hex dump to get the original content, but no such method exists.
Modifications:
- Add ByteBufUtil#decodeHexDump
Result:
ByteBufUtil#decodeHexDump is available to make debugging easier.
Motivation:
RedisDecoder can get into an infinite loop while decoding bulk strings if the final \r and \n to indicate the end of content are split on ByteBuf boundaries.
Modifications:
- We should break out of the decode loop if remainingBulkLength is 0 and we don't have enough data to read EOL
Result:
No more infinite loop in RedisDecoder#decodeBulkStringContent.
Motivation:
We used strstr to find the path to the library, which fails if the library is contained in a directory that also matches the library name.
Modifications:
- Introduce netty_unix_util_strstr_last which will return a pointer which points to the last accourance and so not fails if the direct also matches the library name.
Result:
Be able to load the library in all cases.
Motivation:
Fix the regression recently introduced that causes already encoded responses to be encoded again as gzip
Modification:
instead of just looking for IDENTITY, anything set for Content-Encoding should be respected and left as-is
added unit tests to capture this use case
Result:
Fixes#6784
Motivation:
1. special handling of ByteBuf with multi nioBuffer rather than type of CompositeByteBuf (eg. DuplicatedByteBuf with CompositeByteBuf)
2. EpollDatagramUnicastTest and KQueueDatagramUnicastTest passed because CompositeByteBuf is converted to DuplicatedByteBuf before write to channel
3. uninitalized struct msghdr will raise error
Modifications:
1. isBufferCopyNeededForWrite(like isSingleDirectBuffer in NioDatgramChannel) checks wether a new direct buffer is needed
2. special handling of ByteBuf with multi nioBuffer in EpollDatagramChannel, AbstractEpollStreamChannel, KQueueDatagramChannel, AbstractKQueueStreamChannel and IovArray
3. initalize struct msghdr
Result:
handle of ByteBuf with multi nioBuffer in EpollDatagramChannel and KQueueDatagramChannel are ok
Motivation
RFC 1945 (see section 3.1) says that request lines may not have a version in which case the request is assumed to be HTTP/0.9. We don't necessarily want to support that but the existing Exception should indicate the possibility of the request being HTTP/0.9 and give the user a chance to track it down.
Modifications
Indicate in the Exception's message that the request is possibly HTTP/0.9.
Result
Fixes#6739
Motivation:
The first parameter of SctpMessage is protocolIdentifier, and the second is streamIdentifier. So we need to swap the parameters in encode method
Modification:
Fix order
Result:
SctpOutboundByteStreamHandler works correctly.
Motivation:
The status 308 is defined by RFC7538.
This RFC has currently the state Proposed Standard since 2 years, but the status code is already handle by all browsers (Chrome, Firefox, Edge, Safari, …).
To let developer handles easily this status code, it is added into this list.
Modifications:
Added this status code in the list of all status codes and changed the valudOf() method
Result:
Status code 308 included
Motivation:
We only can call eventLoop() if we are registered on an EventLoop yet. As we just did this without checking we spammed the log with an error that was harmless.
Modifications:
Check if registered on eventLoop before try to deregister on close.
Result:
Fixes [#6770]
Motivation:
If the remote server returns an invalid response in the form "000 \r\n"
(i.e. a three digit code, then space, but no details), null is added
as a singletonList to the response being constructed.
This seems unexpected and it would be easier to handle an empty
details list in client code.
Modifications:
If detail is null (because frame.isReadable() returned false after
reading the separator), initialise DefaultSmtpResponse with an empty
list instead of a list containing a single null value.
Result:
When encountering this malformed server response, a DefaultSmtpResponse
with a code but no details will be created.
Motivation
RFC 6066 (https://tools.ietf.org/html/rfc6066#page-6) says that the hostname in the SNI extension is ASCII encoded but Netty decodes it using UTF-8.
Modifications
Use ASCII instead of UTF-8
Result
Fixes#6717
Motivation:
If the remote server returns a 4xx/5xx error in response to
a DATA command (or earlier command if using pipelining),
SmtpRequestEncoder can become stuck in an invalid state,
not allowing any requests to be sent.
This makes the channel unusable and the connection has to be closed,
or the encoder handler has to be replaced.
Modifications:
If a RSET command is written to the channel, the contentExpected
flag is set to false, and the RSET is written to the channel.
Result:
Sending a RSET command after a server 4xx/5xx error will make it
possible to use the current connection for new mail transactions.
Motivation:
The native epoll transport allows to wrap an existing filedescriptor, we should support the same in the native kqueue transport.
Modifications:
Add constructors that allow to wrap and existing filedescriptor.
Result:
Featureset of native transports more on par.
Motivation:
For our native libraries in netty we support shading, to have this work on runtime the user needs to set a system property. This code should shared.
Modifications:
Move logic to NativeLbiraryLoader and so share for all native libs.
Result:
Less code duplication and also will work for netty-tcnative out of the box once it support shading
Motivation
SslHandler should release any type of SSLEngine if it implements the ReferenceCounted interface
Modifications
Change condition to check for ReferenceCounted interface
Result
Better use of interfaces
Motivation:
`FormattingTuple.getArgArray()` is never used.
In the `MessageFormatter` it is possible to make
some improvements, e.g. replace `StringBuffer`
with `StringBuilder`, avoid redundant allocations, etc.
Modifications:
- Remove `argArray` field from the `FormattingTuple`.
- In `MessageFormatter`:
- replace `StringBuffer` with `StringBuilder`,
- replace `HashMap` with `HashSet` and make it lazy initialized.
- avoid redundant allocations (`substring()`, etc.)
- use appropriate StringBuilder's methods for the some `Number` values.
- Porting unit tests from `slf4j`.
Result:
Less GC load on logging with internal `MessageFormatter`.
Motivation:
IPv4/6 validation methods use allocations, which can be avoided.
IPv4 parse method use StringTokenizer.
Modifications:
Rewriting IPv4/6 validation methods to avoid allocations.
Rewriting IPv4 parse method without use StringTokenizer.
Result:
IPv4/6 validation and IPv4 parsing faster up to 2-10x.
Motivation:
UnixResolverDnsServerAddressStreamProvider allows the default name server address stream to be null, but there should always be a default stream to fall back to ([1] Search Strategy).
UnixResolverDnsServerAddressStreamProvider currently shuffles the names servers are multiple are present, but the defined behavior is to try them sequentially [2].
[1] Search Strategy Section - https://developer.apple.com/legacy/library/documentation/Darwin/Reference/ManPages/man5/resolver.5.html
[2] DESCRIPTION/nameserver Section - https://developer.apple.com/legacy/library/documentation/Darwin/Reference/ManPages/man5/resolver.5.html
Modifications:
- UnixResolverDnsServerAddressStreamProvider should always use the first file provided to derive the default domain server address stream. Currently if there are multiple domain names in the file identified by the first argument of the constructor then one will be selected at random.
- UnixResolverDnsServerAddressStreamProvider should return name servers sequentially.
- Reduce access level on some methods which don't have known use-cases externally.
Result:
Fixes https://github.com/netty/netty/issues/6736
Motivation:
MacOS will throw an error when attempting to set the IP_TOS socket option if IPv6 is available, and also when getting the value for IP_TOS.
Modifications:
- Socket#setTrafficClass and Socket#getTrafficClass should try to use IPv6 first, and check if the error code indicates the protocol is not supported before trying IPv4
Result:
Fixes https://github.com/netty/netty/issues/6741.
Motivation:
We not correctly handle LE buffers when try to read the packet length out of the buffer and just assume it always is a BE buffer.
Modifications:
Correctly account for the endianess of the buffer when reading the packet lenght.
Result:
Fixes [#6709].
Motivation:
We need to include the native modules on the bom to ensure there is no version missmatch.
Modifications:
Add native modules.
Result:
Fixes [#6738]
Motivation:
SslHandler#wrapNonAppData may be able to return early if it is called from a unwrap method and the status is NEED_UNWRAP. This has been observed to occur while using the OpenSslEngine and can avoid allocation of an extra ByteBuf of size 2048.
Modifications:
- Return early from SslHandler#wrapNonAppData if NEED_UNWRAP and we are called from an unwrap method
Result:
Less buffer allocations and early return from SslHandler#wrapNonAppData.
Motivation:
We should only try to load jdk.internal.misc.Unsafe if we run on Java9+ to eliminate noise in the log.
Modifications:
- Move javaVersion() and related methods to PlatformDependent0 to be able to use these in the static initializer without creating a cycle.
- Only try to load jdk.internal.misc.Unsafe when running in Java9+
Result:
Less noise in the log when running pre java9.
