Motivation:
Sometimes it may be benefitially for an user to specify a custom algorithm when choose the next EventExecutor/EventLoop.
Modifications:
Allow to specify a custom EventExecutorChooseFactory that allows to customize algorithm.
Result:
More flexible api.
Motivation:
We need to ensure we not hold a lock while executor callHandlerRemoved(...) as this may lead to a deadlock if handlerRemoved(...) will call another method in DEfaultChannelPipeline from another thread that will need to obtain the lock as well and wait for the result.
Modifications:
Release the lock before call handlerRemoved0(...).
Result:
No more deadlock possible
Motivation:
We not correctly catched errors during resolving in bootstrap and so may not have notified the future correctly.
Modifications:
Move code into try / catch block and try to fail the promise.
Result:
Promise is always notified
Motivation:
The user may specify to use a different allocator then the default. In this case we need to ensure it is shared when creating the EmbeddedChannel inside of a ChannelHandler
Modifications:
Use the config of the "original" Channel in the EmbeddedChannel and so share the same allocator etc.
Result:
Same type of buffers are used.
Motivation:
There is a small race while adding handlers to the pipeline because callHandlerAddedForAllHandlers() may not be run when the user calls add* but the Channel is already registered.
Modifications:
Ensure we always delay handlerAdded(..) / handlerRemoved(...) until callHandlerAddedForAllHandlers() was called.
Result:
No more race on pipeline modifications possible.
Motivation:
We can remove the volatile keyword from the cached Runnables as at worse these will just be re-created.
Modifications:
Remove volatile.
Result:
Less overhead.
Motivation:
SingleThreadEventExecutor.pendingTasks() will call taskQueue.size() to get the number of pending tasks in the queue. This is not safe when using MpscLinkedQueue as size() is only allowed to be called by a single consumer.
Modifications:
Ensure size() is only called from the EventLoop.
Result:
No more livelock possible when call pendingTasks, no matter from which thread it is done.
Motivation:
While doing 8fe3c83e4c I made a change which disallowed using null as name for handlers in the pipeline (this generated a new name before).
Modifications:
Revert to old behaviour and adding test case.
Result:
Allow null name again
Motivation:
At the moment the user is responsible to increase the writer index of the composite buffer when a new component is added. We should add some methods that handle this for the user as this is the most popular usage of the composite buffer.
Modifications:
Add new methods that autoamtically increase the writerIndex when buffers are added.
Result:
Easier usage of CompositeByteBuf.
Motivation:
EventLoopGroup.register doesn't need the Channel paramter when ChannelPromise is provided as we can get the Channel from ChannelPromise. Resolves#2422.
Modifications:
- Add EventLoopGroup.register(ChannelPromise)
- Deprecate EventLoopGroup.register(Channel, ChannelPromise)
Result:
EventLoopGroup.register is more convenient as people only need to set one parameter.
Motivation:
DefaultChannelPipeline was tightly coupled to AbstractChannel which is not really needed.
Modifications:
Move logic of calling handlerAdded(...) for handlers that were added before the Channel was registered to DefaultChannelPipeline by making it part of the head context.
Result:
Less coupling and so be able to use DefaultChannelPipeline also with other Channel implementations that not extend AbstractChannel
Motivation:
We do a "blind" cast to AbstractChannel in AbstractChannelHandlerContext which we should better no do. It would be better to decouble AbstractChannelHandlerContext from AbstractChannel.
Modifications:
Decouble AbstractChannelHandlerContext from AbstractChannel by move logic to DefaultChannelPipeline
Result:
Less coubling and less casting.
Motivation:
If the user will use addLast(...) on the ChannelPipeline of EmbeddedChannel after its constructor was run it will break the EmbeddedChannel as it will not be able to collect inbound messages and exceptions.
Modifications:
Ensure addLast(...) work as expected by move the logic of handling messages and exceptions ti protected methods of DefaultChannelPipeline and use a custom implementation for EmbeddedChannel
Result:
addLast(...) works as expected when using EmbeddedChannel.
Motivation:
Recycler.recycle(...) should not be used anymore and be replaced by Handle.recycle().
Modifications:
Mark it as deprecated and update usage.
Result:
Correctly document deprecated api.
Motivation:
The Bootstrap class (applies also to AbstractBootstrap and ServerBootstrap) has a few package private getter methods and some things such as #attr() and #options() aren't exposed at all.
Modifications:
Expose "getters" for configured things in a safe-manner via the config() method.
Result:
Easier for the user to check what is configured for a Bootstrap/ServerBootstrap.
Motivation:
The DuplexChannel is currently incomplete and only supports shutting down the output side of a channel. This interface should also support shutting down the input side of the channel.
Modifications:
- Add shutdownInput and shutdown methods to the DuplexChannel interface
- Remove state in NIO and OIO for tracking input being shutdown independent of the underlying transport's socket type. Tracking the state independently may lead to inconsistent state.
Result:
DuplexChannel supports shutting down the input side of the channel
Fixes https://github.com/netty/netty/issues/5175
Motivation:
When a user has multiple EventLoops in an EventLoopGroup and calls pipeline.add* / remove* / replace from an EventLoop that belongs to another Channel it is possible to deadlock if the other EventLoop does the same.
Modification:
- Only ensure the actual modification takes place in a synchronized block and not wait until the handlerAdded(...) / handlerRemoved(...) method is called. This is ok as we submit the task to the executor while still holding the look and so ensure correct order of pipeline modifications.
- Ensure if an AbstractChannelHandlerContext is put in the linked-list structure but the handlerAdded(...) method was not called we skip it until handlerAdded(...) was called. This is needed to ensure handlerAdded(...) is always called first.
Result:
Its not possible to deadlock when modify the DefaultChannelPipeline.
Related: #4333#4421#5128
Motivation:
slice(), duplicate() and readSlice() currently create a non-recyclable
derived buffer instance. Under heavy load, an application that creates a
lot of derived buffers can put the garbage collector under pressure.
Modifications:
- Add the following methods which creates a non-recyclable derived buffer
- retainedSlice()
- retainedDuplicate()
- readRetainedSlice()
- Add the new recyclable derived buffer implementations, which has its
own reference count value
- Add ByteBufHolder.retainedDuplicate()
- Add ByteBufHolder.replace(ByteBuf) so that..
- a user can replace the content of the holder in a consistent way
- copy/duplicate/retainedDuplicate() can delegate the holder
construction to replace(ByteBuf)
- Use retainedDuplicate() and retainedSlice() wherever possible
- Miscellaneous:
- Rename DuplicateByteBufTest to DuplicatedByteBufTest (missing 'D')
- Make ReplayingDecoderByteBuf.reject() return an exception instead of
throwing it so that its callers don't need to add dummy return
statement
Result:
Derived buffers are now recycled when created via retainedSlice() and
retainedDuplicate() and derived from a pooled buffer
Motivation:
We tried to provide the ability for the user to change the semantics of the threading-model by delegate the invoking of the ChannelHandler to the ChannelHandlerInvoker. Unfortunually this not really worked out quite well and resulted in just more complexity and splitting of code that belongs together. We should remove the ChannelHandlerInvoker again and just do the same as in 4.0
Modifications:
Remove ChannelHandlerInvoker again and replace its usage in Http2MultiplexCodec
Result:
Easier code and less bad abstractions.
Motivation:
If a task was submitted when wakenUp value was true, the task didn't get a chance to call Selector#wakeup.
So we need to check task queue again before executing select operation. If we don't, the task might be pended until select operation was timed out.
It might be pended until idle timeout if IdleStateHandler existed in pipeline.
Modifications:
Execute Selector#select in a non-blocking manner if there's a task submitted when wakenUp value was true.
Result:
Every tasks in NioEventLoop will not be pended.
Motivation:
Users sometimes want to use Channel.voidPromise() when write to a Channel to reduce GC-pressure. This should be also possible when write via a ChannelGroup.
Modifications:
Add new write(...) and writeAndFlush(...) overloads which allow to signale that a VoidPromise should be used to write to the Channel
Result:
Users can write with VoidPromise when using ChannelGroup
Motivation:
ChannelHandlerContext, ChannelPipeline and Channel share various method signatures. We should provide an interface to share.
Modifications:
Add ChannelInboundInvoker and ChannelOutboundInvoker and extend these.
Result:
Better API abstraction.
Motivation:
To be more consistent we should use ConnectException when we fail the connect attempt because no LocalServerChannel exists with the given address.
Modifications:
Use correct exception.
Result:
More consistent handling of connection refused between different transports.
Motivation:
Bootstrap.connect(...) tries to obtain the EventLoop of a Channel before it may be registered. This will cause an IllegalStateException. We need to ensure we handle the cause of late registration and not throw in this case.
Modifications:
Ensure we only try to access the EventLoop after the Channel is registered and handle the case of late registration.
Result:
Bootstrap.connect(...) not fails on late registration.
Motivation:
EventExecutor.children uses generics in such a way that an entire colleciton must be cast to a specific type of object. This interface is not very flexible and is impossible to implement if the EventExecutor type must be wrapped. The current usage of this method also does not have any clear need within Netty. The Iterator interface allows for EventExecutor to be wrapped and forces the caller to make assumptions about types instead of building the assumptions into the interface.
Motivation:
- Remove EventExecutor.children and undeprecate the iterator() interface
Result:
EventExecutor interface has one less method and is easier to wrap.
Motivation:
The ChannelHandlerContext.attr(...) and ChannelHandlerContext.hasAttr(...) delegated to Channel for the attributes which is a semantic change compared to 4.0 releases. We should not change the semantic to not break users applications when upgrading to 4.1.0
Modifications:
- Revert semantic change
- Mark ChannelHandlerContext.attr(...) and hasAttr(...) as @deprecated so we can remove these later
Result:
Semantic of attribute operations on ChannelHandlerContext is the same in 4.1 as in 4.0 again.
Motivation:
We should not try to call bind if registration failed.
Modifications:
Only call doBind0(...) when the registration not failed.
Result:
Not try to to bind if the registration failed.
Motivation:
We use channel.unsafe().invoker().executor() in DefaultChannelPipeline.executorSafe(...) which is an unnecessary indirection to channel.eventLoop().
Modifications:
Remove indirection by using channel.eventLoop().
Result:
Cleaner code.
Motivation:
The LateListener logic is prone to infinite loops and relies on being processed in the EventExecutor's thread for synchronization, but this EventExecutor may not be constant. An infinite loop can occur if the EventExecutor's execute method does not introduce a context switch in LateListener.run. The EventExecutor can be changed by classes which inherit from DefaultPromise. For example the DefaultChannelPromise will return w/e EventLoop the channel is registered to, but this EventLoop can change (re-registration).
Modifications:
- Remove the LateListener concept and instead use a single Object to maintain the listeners while still preserving notification order
- Make the result member variable an atomic variable so it can be outside the synchronized(this) blocks
- Cleanup/simplify existing state management code
Result:
Fixes https://github.com/netty/netty/issues/5185
Motivation:
NioDatagramChannelConfig currently uses NetworkChannel in its static { } block and so fails to init on android which not has this class.
Modifications:
Use reflection to load the NetworkChannel.class
Result:
Be able to use NIO Datagram on android as well.
Motivation:
We may produce a NPE due a race that can happen while check if a resolution was done and failed.
Modifications:
Correctly first check if the resultion is done before try to detect if it failed and so remove the race that can produce a NPE.
Result:
No more race possible while resolve address during connect.
Motivation:
Reduce nag warnings when compiling, make it easier for IDEs to display what's deprecated.
Modifications:
Added @Deprecated in a few places
Result:
No more warnings.
Motivation:
If a channel is deregistered from an NioEventLoop the associated SelectionKey is cancelled. If the NioEventLoop has yet to process a pending event as a result of that SelectionKey then the NioEventLoop will see the SelecitonKey is invalid and close the channel. The NioEventLoop should not close a channel if it is not registered with that NioEventLoop.
Modifications:
- NioEventLoop.processSelectedKeys should check that the channel is still registered to itself before closing the channel
Result:
NioEventLoop doesn't close a channel that is no longer registered to it when the SelectionKey is invalid
Fixes https://github.com/netty/netty/issues/5125
Motivation:
Revert d0943dcd30. Delaying the notification of writability change may lead to notification being missed. This is a ABA type of concurrency problem.
Modifications:
- Revert d0943dcd30.
Result:
channelWritabilityChange will be called on every change, and will not be suppressed due to ABA scenario.
Motivation:
Commit 0bc93dd introduced a potential assertion failure, if the deprecated method would be used.
Modifications:
Fix the potential assertion error.
Result:
Regression removed
Motivation:
There is one extra } for WriteBufferWaterMark's javadoc:
{@linkplain #high} high water mark}
The generated javadoc will show the content: "the high high water mark}"
Modifications:
remove the }
Result:
The generated javadoc will show the content: "the high water mark" instead of "the high high water mark}"
Motivation:
Prior to 5b48fc284e setting readPending to false when autoReadClear was called was enough because when/if the EventLoop woke up with a read event we would first check if readPending was true and if it is not, we would return early. Now that readPending will only be set in the EventLoop it is not necessary to check readPending at the start of the read methods, and we should instead remove the OP_READ from the SelectionKey when we also set readPending to false.
Modifications:
- autoReadCleared should call AbstractNioUnsafe.removeReadOp
Result:
NIO is now consistent with EPOLL and removes the READ operation on the selector when autoRead is cleared.
Motivation:
OIO/NIO use a volatile variable to track if a read is pending. EPOLL does not use a volatile an executes a Runnable on the event loop thread to set readPending to false. These mechansims should be consistent, and not using a volatile variable is preferable because the variable is written to frequently in the event loop thread.
OIO also does not set readPending to false before each fireChannelRead operation and may result in reading more data than the user desires.
Modifications:
- OIO/NIO should not use a volatile variable for readPending
- OIO should set readPending to false before each fireChannelRead
Result:
OIO/NIO/EPOLL are more consistent w.r.t. readPending and volatile variable operations are reduced
Fixes https://github.com/netty/netty/issues/5069
Motivation:
When always triggered fireChannelWritabilityChanged() directly when the update the pending bytes in the ChannelOutboundBuffer was made from within the EventLoop. This is problematic as this can cause some re-entrance issue if the user has a custom ChannelOutboundHandler that does multiple writes from within the write(...) method and also has a handler that will intercept the channelWritabilityChanged event and trigger another write when the Channel is writable. This can also easily happen if the user just use a MessageToMessageEncoder subclass and triggers a write from channelWritabilityChanged().
Beside this we also triggered fireChannelWritabilityChanged() too often when a user did a write from outside the EventLoop. In this case we increased the pending bytes of the outboundbuffer before scheduled the actual write and decreased again before the write then takes place. Both of this may trigger a fireChannelWritabilityChanged() event which then may be re-triggered once the actual write ends again in the ChannelOutboundBuffer.
The third gotcha was that a user may get multiple events even if the writability of the channel not changed.
Modification:
- Always invoke the fireChannelWritabilityChanged() later on the EventLoop.
- Only trigger the fireChannelWritabilityChanged() if the channel is still active and if the writability of the channel changed. No need to cause events that were already triggered without a real writability change.
- when write(...) is called from outside the EventLoop we only increase the pending bytes in the outbound buffer (so that Channel.isWritable() is updated directly) but not cause a fireChannelWritabilityChanged(). The fireChannelWritabilityChanged() is then triggered once the task is picked up by the EventLoop as usual.
Result:
No more re-entrance possible because of writes from within channelWritabilityChanged(...) method and no events without a real writability change.
Motivation:
441aa4c575 introduced a bug in transport-native-epoll where readPending is set to false before a read is attempted, but this should happen before fireChannelRead is called. The NIO transport also only sets the readPending variable to false on the first read in the event loop. This means that if the user only calls read() on the first channelRead(..) the select loop will still listen for read events even if the user does not call read() on subsequent channelRead() or channelReadComplete() in the same event loop run. If the user only needs 2 channelRead() calls then by default they will may get 14 more channelRead() calls in the current event loop, and then 16 more when the event loop is woken up for a read event. This will also read data off the TCP stack and allow the peer to queue more data in the local RECV buffers.
Modifications:
- readPending should be set to false before each call to channelRead()
- make NIO readPending set to false consistent with EPOLL
Result:
NIO and EPOLL transport set readPending to false at correct times which don't read more data than intended by the user.
Fixes https://github.com/netty/netty/issues/5082
Motivation:
When a promise is notified that was already added to the ChannelOutboundBuffer and we try to notify it later on we only see a warning that it was notified before. This is often not very useful as we have no idea where it was notified at all. We can do better in case it was failed before (which is most of the times the case) and just also log the cause that was used for it.
Modifications:
Add the cause that was used to notify the promise when we fail to notify it as part of the ChannelOutboundBuffer.
Result:
Easier to debug user errors.
Motivation:
There is a spelling error in FileRegion.transfered() as it should be transferred().
Modifications:
Deprecate old method and add a new one.
Result:
Fix typo and can remove the old method later.
Motivation:
DefaultChannelHandlerInvoker currently blindly cast to AbstractChannelHandlerContext without checking if the ChannelHandlerContext is really a sub-type of it. It should check it first and if not just use slow-path implementation.
Modifications:
Do instanceof check first and if it fails just create a new Runnable instance of used the cached.
Result:
DefaultChannelHandlerInvoker works with any ChannelHandlerContext implementations.
Motivation:
Setting the WRITE_BUFFER_LOW_WATER_MARK before WRITE_BUFFER_HIGH_WATER_MARK results in an internal Exception (appears only in the logs) if the value is larger than the default high water mark value. The WRITE_BUFFER_HIGH_WATER_MARK call appears to have no effect in this context.
Setting the values in the reverse order works.
Modifications:
- deprecated ChannelOption.WRITE_BUFFER_HIGH_WATER_MARK and
ChannelOption.WRITE_BUFFER_LOW_WATER_MARK.
- add one new option called ChannelOption.WRITE_BUFFER_WATER_MARK.
Result:
The high/low water mark values limits caused by default values are removed.
Setting the WRITE_BUFFER_LOW_WATER_MARK before WRITE_BUFFER_HIGH_WATER_MARK results in an internal Exception (appears only in the logs) if the value is larger than the default high water mark value. The WRITE_BUFFER_HIGH_WATER_MARK call appears to have no effect in this context.
Setting the values in the reverse order works.
Motivation:
If a handler is added to the pipeline within ChannelInitializer::initChannel via
addFirst(...) then it will not receive the channelRegistered event. The same
handler added via addLast(...) will receive the event. This different behavior
is unlikely to be expected by users and can cause confusion.
Modifications:
Let ChannelInitializer::channelRegistered propagate the event by passing it to
the pipeline instead of firing it on the ChannelHandlerContext.
Result:
The channelRegistered event is propagated to handlers regardless of the method
used to add it to the pipeline (addFirst/addLast).
Motivation:
NIO now supports a pluggable select strategy, but EPOLL currently doesn't support this. We should strive for feature parity for EPOLL.
Modifications:
- Add SelectStrategy to EPOLL transport.
Result:
EPOLL transport supports SelectStategy.
Motivation:
Under high throughput/low latency workloads, selector wakeups are
degrading performance when the incoming operations are triggered
from outside of the event loop. This is a common scenario for
"client" applications where the originating input is coming from
application threads rather from the socket attached inside the
event loops.
As a result, it can be desirable to defer the blocking select
so that incoming tasks (write/flush) do not need to wakeup
the selector.
Modifications:
This changeset adds the notion of a generic SelectStrategy which,
based on its contract, allows the implementation to optionally
defer the blocking select based on some custom criteria.
The default implementation resembles the original behaviour, that
is if tasks are in the queue `selectNow()` and move on, and if no
tasks need to be processed go into the blocking select and wait
for wakeup.
The strategy can be customized per `NioEventLoopGroup` in the
constructor.
Result:
High performance client applications are now given the chance to
customize for how long the actual selector blocking should be
deferred by employing a custom select strategy.
Motivation:
There is no need to make DefaultChannelId package private as it may be useful for the user. For example EmbeddedChannel allows to inject a ChannelId when it is constructed. For this case the user can just use DefaultChannelId.
Modifications:
Change visibility of DefaultChannelId to public.
Result:
It's possible to create a new instance of DefaultChannelId by the user.
Motivation:
We need to ensure we run all pending tasks before doing any flush in writeOutbound(...) to ensure all pending tasks are run first. Also we should remove the assert of the future and just add a listener to it so it is processed later if needed. This is true as a user may schedule a write for later execution.
Modifications:
- Remove assert of future in writeOutbound(...)
- Correctly run pending tasks before doing the flush and also before doing the close of the channel.
- Add unit tests to proof the defect is fixed.
Result:
Correclty handle the situation of delayed writes.
Motivation:
cf171ff525 introduced a change in behavior when dealing with closing channel in the read loop. This changed behavior may use stale state to determine if a channel should be shutdown and may be incorrect.
Modifications:
- Revert the usage of potentially stale state
Result:
Closing a channel in the read loop is based upon current state instead of potentially stale state.
Motivation:
Often the user uses EmbeddedChannel within unit tests where the only "important" thing is to know if any pending messages were in the buffer and then release these.
We should provide methods for this so the user not need to manually loop through these and release.
Modifications:
Add methods to easily handle releasing of messages.
Result:
Less boiler-plate code for the user to write.
Motivation:
If an error occurs during a write operation then DefaultHttp2ConnectionEncoder.FlowControlledData will clear the CoalescingBufferQueue which will reset the queue's readable bytes to 0. To recover from an error the DefaultHttp2RemoteFlowController will attempt to return bytes to the flow control window, but since the frame has reset its own size this will lead to invalid flow control accounting.
Modifications:
- DefaultHttp2ConnectionEncoder.FlowControlledData should not reset its size if an error occurs
Result:
No more flow controller errors due to DefaultHttp2ConnectionEncoder.FlowControlledData setting its size to 0 if an error occurs.
Motivation:
PromiseAggregator's API allows for the aggregate promise to complete before the user is done adding promises. In order to support this use case the API structure would need to change in a breaking manner.
Modifications:
- Deprecate PromiseAggregator and subclasses
- Introduce PromiseCombiner which corrects these issues
Result:
PromiseCombiner corrects the deficiencies in PromiseAggregator.
Motivation:
PendingWriteQueue should guard against re-entrant writes once
removeAndFailAll() is run.
Modifications:
removeAndFailAll() should repeat until the queue is finally empty.
Result:
assertEmpty() will always hold.
Motivation:
We should guard users from using Unsafe methods from outside the EventLoop if not designed to do so.
Modifications:
Add asserts
Result:
Easier for users to detect miss-use.
Motivation:
e2f5012 added unit tests which did not verify the buffer was released as it was intended to.
Modification:
- Unit tests must verify release is called
Result:
Unit tests enforce that ByteBufs are released.
Motivation:
DefaultChannelHandlerInvoker.invokeWrite calls a utility method validatePromise which may throw if the arguments are not valid. If this method throws then the message will not be released.
Modifications:
- If an exception is thrown the message should be released
Result:
No more leak in DefaultChannelHandlerInvoker.invokeWrite
Motivation:
See #3746.
Modifications:
Fork SpscLinkedQueue and SpscLinkedAtomicQueue from JCTools based on 7846450e28
Result:
Add SpscLinkedQueue and SpscLinkedAtomicQueue and apply it in LocalChannel.
Motiviation:
We should ensure that handlerAdded(...) and handlerRemoved(...) is always called from the EventExecutor that also invokes the other methods of the ChannelHandler. Also we need to ensure we always call handlerAdded(...) before any other method can be calld to ensure correct ordering.
Motifications:
- Ensure that the right thread is used to call the methods
- Ensure correct ordering
- Add tests
Result:
Respect the thread-model for handlerAdded(...) and handlerRemoved(...) and preserve correct ordering in all cases.
Motivation:
The implementation of obtaining the best possible mac address is very good. There are many sub-par implementations proposed on stackoverflow.
While not strictly a netty concern, it would be nice to offer this util also to netty users.
Modifications:
extract DefaultChannelId#defaultMachineId code obtaining the "best" mac into a new helper called MacAddress, keep the random bytes fallback in DefaultChannelID.
Result:
New helper available.
Motivation:
When a channel was registered before and is re-registered we need to respect ChannelConfig.isAutoRead() and so start reading one the registration task completes. This was done "by luck" before 15162202fb.
Modifications:
Explicit start reading once a Channel was re-registered if isAutoRead() is true.
Result:
Correctly receive data after re-registration completes.
Motivation:
Due a regression introduced by e969b6917c we missed to pass the original ChannelPromise to the next ChannelOutboundHandler and so
may never notify the origin ChannelPromise. This is related to #4805.
Modifications:
- Correctly pass the ChannelPromise
- Add unit test.
Result:
Correctly pass the ChannelPromise on deregister(...)
Motivation:
fix the issue netty#2944
Modifications:
use - instead of =>, use ! instead of :> due to the connection is bidirectional. What's more, toString() method don't know the direction or there is no need to know the direction when only log channel information.
add L： before local address and R: before remote address.
Result:
after the fix, log won't confuse the user
Motivation:
The AbstractChannel(Channel parent) constructor was previously hard-coded to always
call DefaultChannelId.newInstance(), and this made it difficult to use a custom
ChannelId implementation with some commonly used Channel implementations.
Modifications:
Introduced newId() method in AbstractChannel, which by default returns
DefaultChannelId.newInstance() but can be overridden by subclasses. Added
ensureDefaultChannelId() test to AbstractChannelTest, to ensure the prior
behavior of calling DefaultChannelId.newInstance() still holds with the
AbstractChannel(Channel parent) constructor.
Result:
AbstractChannel now has the protected newId() method, but there is no functional
difference.
Motivation:
A few implementations of OioServerChannel have a default max messages per read set to 16. We should set the default to 1 to prevent blocking on a read before setting a socket that has just been accepted.
Modifications:
- OioSctpServerChannel and OioServerSocketChannel metadata changed to use the default (1) max messages per read
Result:
Oio based servers will complete accepting a socket before potentially blocking waiting to accept other sockets.
Motivation:
If a user adds a ChannelHandler from outside the EventLoop it is possible to get into the situation that handlerAdded(...) is scheduled on the EventLoop and so called after another methods of the ChannelHandler as the EventLoop may already be executing on this point in time.
Modification:
- Ensure we always check if the handlerAdded(...) method was called already and if not add the currently needed call to the EventLoop so it will be picked up after handlerAdded(...) was called. This works as if the handler is added to the ChannelPipeline from outside the EventLoop the actual handlerAdded(...) operation is scheduled on the EventLoop.
- Some cleanup in the DefaultChannelPipeline
Result:
Correctly order of method executions of ChannelHandler.
Motivation:
ChannelOutboundHandlerAdapter's javadoc has some minor issues.
Modifications:
Fix the minor javadoc issues and resolves#4752.
Result:
ChannelOutboundHandlerAdapter's javadoc issues are fixed.
Motivation:
Being able to access the invoker() is useful when adding additional
handlers that should be running in the same thread. Since an application
may be using a threading model unsupported by the default invoker, they
can specify their own. Because of that, in a handler that auto-adds
other handlers:
// This is a good pattern
ctx.pipeline().addBefore(ctx.invoker(), ctx.name(), null, newHandler);
// This will generally work, but prevents using custom invoker.
ctx.pipeline().addBefore(ctx.executor(), ctx.name(), null, newHandler);
That's why I believe in commit 110745b0, for the now-defunct 5.0 branch,
when ChannelHandlerAppender was added the invoker() method was also
necessary.
There is a side-benefit to exposing the invoker: in certain advanced
use-cases using the invoker for a particular handler is useful. Using
the invoker you are able to invoke a _particular_ handler, from possibly
a different thread yet still using standard exception processing.
ChannelHandlerContext does part of that, but is unwieldy when trying to
invoke a particular handler because it invokes the prev or next handler,
not the one the context is for. A workaround is to use the next or prev
context (respectively), but this breaks when the pipeline changes.
This came up during writing the Http2MultiplexCodec which uses a
separate child channel for each http/2 stream and wants to send messages
from the child channel directly to the Http2MultiplexCodec handler that
created it.
Modifications:
Add the invoker() method to ChannelHandlerContext. It was already being
implemented by AbstractChannelHandlerContext. The two other
implementations of ChannelHandlerContext needed minor tweaks.
Result:
Access to the invoker used for a particular handler, for either reusing
for other handlers or for advanced use-cases. Fixes#4738
Motivation:
ChannelInboundHandler and ChannelOutboundHandler both can implement exceptionCaught(...) method and so we need to dispatch to both of them.
Modifications:
- Correctly first dispatch exceptionCaught to the ChannelInboundHandler but also make sure the next handler it will be dispatched to will be the ChannelOutboundHandler
- Add removeInboundHandler() and removeOutboundHandler() which allows to remove one of the combined handlers
- Let *Codec extends it and not ChannelHandlerAppender
- Remove ChannelHandlerAppender
Result:
Correctly handle events and also have same behavior as in 4.0
Motivation:
Our contract in Channels is that the promise should always be notified before the actual callbacks of the ChannelInboundHandler are called. This was not done in the LocalChannel and so the behavior was different to other Channel implementations.
Modifications:
- First complete the ChannelPromise then call fireChannelActive()
- Guard against NPE when doClose() was called before the task was executed.
Result:
Consistent behavior between LocalChannel and other Channel implementations.
Motivation:
In AbstractChannelTest we not correctly mocked some methods which could lead to test errors. That said it only showed up here when running from the IDE and not from the cmdLine.
Modifications:
Mock methods that are needed for the test
Result:
Test pass in the IDE as well.
Motivation:
At the moment EmbeddedChannel always handle close() and disconnect() the same way which also means that ChannelOutboundHandler.disconnect(...) will never called. We should allow to specify if these are handle different or not to make the use of EmbeddedChannel more flexible.
Modifications:
Add 2 other constructors which allow to specify if disconnect / close are handled the same way or differently.
Result:
More flexible usage of EmbeddedChannel possible.
Motivation:
Boxing/unboxing can be avoided.
Modifications:
Use parseInt/parseLong to avoid unnecessary boxing/unboxing.
Result:
Remove unnecessary boxing/unboxing.
Motivation:
The prefix fix of #2363 did not correctly handle the case when selectAgain is true and so missed to null out entries.
Modifications:
Move the i++ from end of loop to beginning of loop
Result:
Entries in the array will be null out so allow to have these GC'ed once the Channel close
Motivation:
We often used synchronized(this) while the whole method was synchronized, which can be simplified by just mark the whole method as synchronized.
Modifications:
Replace synchronized(this) with synchronized on the method
Result:
Cleaner code
Motivation:
Warnings in IDE, unclean code, negligible performance impact.
Modification:
Deletion of unused imports
Result:
No more warnings in IDE, cleaner code, negligible performance improvement.
Motivation:
Javadoc reports errors about invalid docs.
Modifications:
Fix some errors reported by javadoc.
Result:
A lot of javadoc errors are fixed by this patch.
Motivation:
There are some wrong links and tags in javadoc.
Modifications:
Fix the wrong links and tags in javadoc.
Result:
These links will work correctly in javadoc.
Motivation:
As a user may call deregister() from within any method while doing processing in the ChannelPipeline, we need to ensure we do the actual deregister operation later. This is needed as for example, we may be in the ByteToMessageDecoder.callDecode(...) method and so still try to do processing in the old EventLoop while the user already registered the Channel to a new EventLoop. Without delay, the deregister operation this could lead to have a handler invoked by different EventLoop and so threads.
Modifications:
Ensure the actual deregister will be done later on and not directly when invoked.
Result:
Calling deregister() within ByteToMessageDecoder.decode(..) is safe.
Motivation:
Estimation algorithm currently used for WriteTasks is complicated and
wrong. Additionally, some code relies on outbound buffer size
incremented only on actual writes to the outbound buffer.
Modifications:
- Throw away the old estimator and replace with a simple algorithm that
uses the client-provided estimator along with a statically configured
WriteTask overhead (io.netty.transport.writeTaskSizeOverhead system
property with the default value of 48 bytes)
- Add a io.netty.transport.estimateSizeOnSubmit boolean system property
allowing the clients to disable the message estimation outside the
event loop
Result:
Task estimation is user controllable and produces better results by
default
Motivation:
As discussed in #4529, NameResolver design shouldn't be resolving SocketAddresses (or String name + port) and return InetSocketAddresses. It should resolve String names and return InetAddresses.
This SocketAddress to InetSocketAddresses resolution is actually a different concern, used by Bootstrap.
Modifications:
Extract SocketAddress to InetSocketAddresses resolution concern to a new class hierarchy named AddressResolver.
These AddressResolvers delegate to NameResolvers.
Result:
Better separation of concerns.
Note that new AddressResolvers generate a bit more allocations because of the intermediate Promise and List<InetAddress>.
Motivation:
We need to remove all registered events for a Channel from the EventLoop before doing the actual close to ensure we not produce a cpu spin when the actual close operation is delayed or executed outside of the EventLoop.
Modifications:
Deregister for events for NIO and EPOLL socket implementations when SO_LINGER is used.
Result:
No more cpu spin.
Motivation:
Fix a race-condition when closing NioSocketChannel or EpollSocketChannel while try to detect if a close executor should be used and the underlying socket was already closed. This could lead to an exception that then leave the channel / in an invalid state and so could lead to side-effects like heavy CPU usage.
Modifications:
Catch possible socket exception while try to get the SO_LINGER options from the underlying socket.
Result:
No more race-condition when closing the channel is possible with bad side-effects.
Motivation:
ChannelMetadata has a field minMaxMessagesPerRead which can be confusing. There are also some cases where static instances are used and the default value for channel type is not being applied.
Modifications:
- use a default value which is set unconditionally to simplify
- make sure static instances of MaxMessagesRecvByteBufAllocator are not used if the intention is that the default maxMessagesPerRead should be derived from the channel type.
Result:
Less confusing interfaces in ChannelMetadata and ChannelConfig. Default maxMessagesPerRead is correctly applied.
Motivation:
The CoalescingBufferQueueTest is somewhat relaxed with its releasing of test buffers, using safeRelease to generically deal with tests that may or may not release the buffers. SafeRelease generates logs, however, when the release fails.
Modifications:
Tightened up the individual test methods to verify that the buffers are released properly.
Result:
Fixes#4497
Motivation:
The javadocs for ChannelOption.AUTO_CLOSE say the default is false, but the default is currently true.
Modifications:
- Make javadocs consistent with code
Result:
Less confusing docs.
Motivation:
exceptionCaught(...) will only handle inbound exceptions which means it makes not much sense to have it also on ChannelOutboundHandler. Because of this we should move it to ChannelInboundHandler.
Modifications:
Add @deprecated annotation to ChannelHandler.exceptionCaught(...).
Result:
Preapre to cleanup the API in later release.
Motivation:
We should use OneTimeTask where possible to reduce object creation.
Modifications:
Replace Runnable with OneTimeTask
Result:
Less object creation
Motivation:
We not need to store another reference to AbstractChannel as we can access it through DefaultChannelHandlerContext.
Modifications:
Remove reference.
Result:
Cleaner code.
Motivation:
If you start to have 1M+ concurrent connections memory footprint can be come a big issue. We should try to reduce it as much as possible in the core of netty.
Modifications:
- Remove HashMap that was used to store name to ctx mapping. This was only used for validation and access a handler by name. As a pipeline is not expected to be very long (like 100+ handlers) we can just walk the linked list structure to find the ctx with a given name.
Result:
Less memory footprint of the DefaultChannelPipeline.
Motivation:
The previous DefaultChannelPipeline#destroy() implementation, introduced in #3156, is suboptimal as it can cause the for loop to continuously spin if the executor used by a given handler is unable to "recognize" the event loop.
It could be objected that it's the custom executor responsibility to properly implement the inEventLoop() method, but some implementetaions might not be able to do that for performance reasons, and even so, it's always better to be safe against API misuse, in particular when it is not possible to fail fast and the alternative is rather some sutle behaviour.
Modifications:
The patch simply avoids the recursive spin by explicitly passing the "in event loop" condition as a boolean parameter, preserving the same guarantees offered by #3156. A unit test has also been added.
Result:
All channel events are correctly called and no high CPU usage is seen anymore.
Motivation:
Changing the chache of generated names to use a cache per thread. This will remove the bottleneck when many eventloops are used and names need to generate.
Modifications:
Use a FastThreadLocal to store the cached names.
Result:
Less locking between threads.
Motivation:
We should only call ReferenceCountUtil.touch(...) if needed as otherwise we pay the overhead of instanceof and cast
everytime.
Modifications:
Add boolean flag which indicates if touch(...) should be called.
Result:
Less overhead when leak detection is not enabled.
Motiviation:
If a user writes from outside the EventLoop we increase the pending bytes of the outbound buffer before submitting the write request. This is done so the user can stop writing asap once the channel turns unwritable. Unfortunally this doesn't take the overhead of adding the task into the account and so it is very easy for an user to full up the task queue. Beside this we use a value of 0 for an unown message by default which is not ideal.
Modifications:
- port the message calculation we used in netty 3.x into AbstractChannelHandlerContext and so better calculate the overhead of a message that is submitted from outside the EventLoop
- change the default estimated size for an unknown message to 8.
Result:
Better behaviour when submiting writes from outside the EventLoop.
Motivation:
Once a FixedChannelPool was closed we must not allow to acquire or release Channels to prevent assert errors.
Modifications:
Fail release and acquire calls when FixedChannelPool is closed.
Result:
No more assert errors.1
Motivation:
As MaxMessageHandle is stateful we can not share the same HandleImpl instance as otherwise we will see race conditions.
Modifications:
Create a new HandleImpl instance on each newHandle() call.
Result:
No more races.
Motivation:
EmbeddedChannelId#hashCode() and equals() do not behave correctly if an
instance is serialized and then deserialized. Additionally,
EmbeddedChannel does not allow use of any other type of ChannelId, and
EmbeddedChannelId is (mostly) a singleton instance. This creates a
problem for unit tests that construct multiple EmbeddedChannels and
expect each channel to have a unique ID.
Modifications:
EmbeddedChannelId is modified so equals() will return true and
hashCode() will return the same value for any instance of the class.
EmbeddedChannel is modified to allow a ChannelId to be specified when
the channel is constructed. Tests added for both changes.
Result:
EmbeddedChannelId now behaves correctly when deserialized, and
EmbeddedChannels can now have unique IDs.
Motivation:
PendingWriteQueueTest needs some cleanup.
Modifications:
- Cleanup code to remove deprecation warnings
- use static imports
Result:
No more warnings
Motivation:
We missed to run all pending tasks when EmbeddedChannel.close(...) or disconnect(...) was called. Because of this channelInactive(...) / channelUnregistered(...) of the handlers were never called.
Modifications:
Correctly run all pending tasks and cancel all not ready scheduled tasks when close or disconnect was called.
Result:
Correctly run tasks on close / disconnect and have channelInactive(...) / channelUnregistered(...) called.
Motiviation:
We need to ensure the actual close to the transport takes place before the promsie of the write is notified that triggered it. This is needed as otherwise Channel.isActive(), isOpen() and isWritable() may return true even if the Channel should be closed already.
Modifications:
- Ensure the close takes place first
Result:
ChannelFutureListener will see the correct state of the Channel.
Motivation:
writeBytes(...) missed to set EPOLLOUT flag when not all bytes were written. This could lead to have the EpollEventLoop not try to flush the remaining bytes once the socket becomes writable again.
Modifications:
- Move setting EPOLLOUT flag logic to one point so we are sure we always do it.
- Move OP_WRITE flag logic to one point as well.
Result:
Correctly try to write pending data if socket becomes writable again.
Motivation:
RecvByteBufAllocator.DelegatingHandle does not provide an accessor to get the delegate handle. This may be useful for classes that extend DelegatingHandle.
Modifications:
- add delegate() method to DelegatingHandle
Result:
Classes which inherit from DelegatingHandle can now access the delegate Handle.
Motivation:
If LocalChannel doWrite executes while the peer's state changes from CONNECTED to CLOSED it is possible that some promise's won't be completed and buffers will be leaked.
Modifications:
- Check the peer's state in doWrite to avoid a race condition
Result:
All write operations should release, and the associated promise should be completed.
Motivation:
https://github.com/netty/netty/pull/4143 addressed a few ordering issues but an ordering issue still remained if the Promise for a write completes, and a listener of that promise does a write on a peer channel. The ordering was subject to how potentially 2 different executors would run a task, but it should be coordinated such that the first write is read first.
Modifications:
- Keep track of the finishPeerRead task run on the executor if necessary and ensure it completes before current channel read occurs
Result:
Ordering of events for echo type situations is preserved.
Motivation:
When a LocalChannel write operation occurs, the promise associated with the write operation is marked successful when it is added to the peer's queue, but before the peer has actually received the data. If the promise callback closes the channel then a race condition exists where the close event may occur before the data is delivered. We should preserve ordering of events.
Modifications:
- LocalChannel should track when a write is in progress, and if a close operation happens make sure the peer gets all pending read operations.
Result:
LocalChannel preserves order of operations.
Fixes https://github.com/netty/netty/issues/4118
Motivation:
Doc of ChannelGroup says, that it can be used to manage server and child channels at once.
However, in DefaultChannelGroup, there is a race condition. When a server channel accepts a child, it schedules its
registration on an event loop, which takes some time. If the ChannelGroup, which is supposed
to close server and child channels at once, is closed after the child channel has been scheduled
for registration and before this registration actually happens, this child channel is not closed
and remains connected. This could lead to connection leaks.
Modifications:
To fix this, the DefaultChannelGroup is changed to has a closed flag.
This flag is set to true, just before the close() method is actually closing channels.
The add() method checks after adding a new channel, if this flag has been set to true.
If yes, the new channel is closed. If not, we have the guarantee, that this channel will be
closed by the ChannelGroup, because setting the closed flag to true happens-before closing any channels.
This behaviour can be activated by two new constructors. The old constructors are still there and behave like before.
Therefore, no existing code should be affected directly.
Result:
If activating this feature, the DefaultChannelGroup can be used, for managing server and child channels at once.
But this activating this feature means also, that a ChannelGroup cannot be reused after calling close().
Related issues:
- #3971
- #3973
- #3976
- #4035
Motivation:
1. Previously, DnsNameResolver.query() retried the request query by its
own. It prevents a user from deciding when to retry or stop. It is also
impossible to get the response object whose code is not NOERROR.
2. NameResolver does not have an operation that resolves a host name
into multiple addresses, like InetAddress.getAllByName()
Modifications:
- Changes related with DnsNameResolver.query()
- Make query() not retry
- Move the retry logic to DnsNameResolver.resolve() instead.
- Make query() fail the promise only when I/O error occurred or it
failed to get a response
- Add DnsNameResolverException and use it when query() fails so that
the resolver can give more information about the failure
- query() does not cache anymore.
- Changes related with NameResolver.resolveAll()
- Add NameResolver.resolveAll()
- Add SimpleNameResolver.doResolveAll()
- Changes related with DnsNameResolver.resolve() and resolveAll()
- Make DnsNameResolveContext abstract so that DnsNameResolver can
decide to get single or multiple addresses from it
- Re-implement cache so that the cache works for resolve() and
resolveAll()
- Add 'traceEnabled' property to enable/disable trace information
- Miscellaneous changes
- Use ObjectUtil.checkNotNull() wherever possible
- Add InternetProtocolFamily.addressType() to remove repetitive
switch-case blocks in DnsNameResolver(Context)
- Do not raise an exception when decoding a truncated DNS response
Result:
- Full control over query()
- A user can now retrieve all addresses via (Dns)NameResolver.resolveAll()
- DNS cache works only for resolve() and resolveAll() now.
Motivation:
When releasing unhealthy channel back to a pool we don't have to offer it since on acquire it will be discarded anyways.
Also checking healthiness at release is a good idea so we don't end up having tons of unhealthy channels in the pool(unless they became unhealthy after being offered)
Modifications:
private SimpleChannelPool.offerIfHealthy() method added that is called from SimpleChannelPool.doReleaseChannel(). SimpleChannelPool.offerIfHealthy() offers channel back to pool only if channel is healthy.
Otherwise it throws setFailure exception to the promise.
Result:
The pool is now much cleaner and not spammed with unhealthy channels.
Added ability to choose if channel health has to be validated on release by passing boolean flag.
Motivation:
Depending on performance preferences and individual use cases sometimes we would like to be able force health check of a channel at release time and do not offer it back to the pool. Other times we would want to just release channel and offer it back to the pool and check health only when we try to acquire that channel from the pool. See more details here: https://github.com/netty/netty/issues/4077#issuecomment-130461684
Modifications:
Future<Void> release(Channel channel, Promise<Void> promise, boolean offerHealthyOnly);
The offerHealthyOnly boolean flag allows developers to choose whether to do channel validation before offering it back to pool or not.
Appropriate modifications made to hierarchy of implementations of ChannelPool. offerHealthyOnly=true will force channel health to be checked before offering back to pool. offerHealthyOnly=false will ignore channel health check and will just try just offer it back to the pool
offerHealthyOnly=true by default.
Result:
Channel health check before offer back to pool is controlled by a flag now.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:279 line split to be less then 120 characters.
SimpleChannelPool.java:280:31 space added after '{'
SimpleChannelPool.java:282:17 space added after '{'
SimpleChannelPoolTest.java:198 - extra white space line removed.
Result:
Code satisfies checkstyle requirements.
offerHealthyOnly is passed as a constructor parameter now.
Motivation:
Instead of passing offerHealthyOnly as a method parameter it is better to pass it in as SimpleChannelPool or FixedChannelPool constructor.
Modifications:
Redundant release method that takes offerHealthyOnly removed from ChannelPool.
offerHealthyOnly parameter added to constructor for FixedChannelPool and SimpleChannelPool.
Result:
SimpleChannelPool and FixedChannelPool are now take offerHealthyOnly as a constructor parameter. Default behavior is: offerHealthyOnly=true.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:84: line made to be no longer then 120 characters.
SimpleChannelPool.java:237: extra white space line removed.
Result:
Code satisfies checkstyle requirements.
Tests do not need to be too copled to the code. Exception message should not be validated
Motivation:
We don't need our tests to be too coupled to the code. Exception type validation in tests is just good enough.
Modifications:
Exception validation message removed from SimpleChannelPoolTest.testUnhealthyChannelIsNotOffered() test.
Result:
The SimpleChannelPoolTest test is less coupled to the code now.
Stack trace set to empty for UNHEALTHY_NON_OFFERED_TO_POOL.
Motivation:
We don't need stack trace for UNHEALTHY_NON_OFFERED_TO_POOL.
Modifications:
Added UNHEALTHY_NON_OFFERED_TO_POOL.setStackTrace(EmptyArrays.EMPTY_STACK_TRACE) to static init block.
Result:
UNHEALTHY_NON_OFFERED_TO_POOL's stack trace set to empty.
Minor code re-factorings.
Motivation:
For better code readability we need to apply several minor code re-factorings.
Modifications:
javadocs true -> {@code true}
offerHealthyOnly variable name changed to releaseHeathCheck
<p/> -> <p> in javadocs
offerHealthyOnly removed from doReleaseChannel as it not needed there.
Result:
Code quality is improved.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:87: line made to be no longer then 120 characters.
Result:
Code satisfies checkstyle requirements.
Pull request needs to contain only necessary changes
Motivation:
The pull request should not contain unnecessary changes that are not needed as part of required functionality of pull request.
Modifications:
private void doReleaseChannel(final Channel channel, final Promise<Void> promise) - > private void doReleaseChannel(Channel channel, Promise<Void> promise)
Result:
Pull request contains less unnecessary modifications.
Motivation:
The acquire channel function resulted in calling itself several times in case when channel polled from the pool queue was unhealthy, which resulted FixedChannelPool to be called several times which in it's turn caused FixedChannelPool.acquire() to be called and resulted into acquireChannelCount to be unnecessary increased.
Example use case:
1) Create FixedChannelPool instance with one channel in the pool: new FixedChannelPool(cb, handler, 1)
2) Acquire channel A from the pool
3) close the channel A
4) Return it back to the pool
5) Acquire channel from the same pool again
Expected result:
new channel created and acquired, channel A that has been closed discarded and removed from the pool from being unhealthy
Actual result:
Channel A had been removed from the pool, how ever the new channel had never be acquired, instead the request to acquire had been added to the pending queue in FixedChannelPool and the acquireChannelCount is increased by one. The reason is that at the time when SimpleChannelPool figured out that the channel was unhealthy called FixedChannelPool.acquire to try to acquire new channel, how ever the request was added to the pendingTakQueue because by the time when FixedChannelPool.acquire was called, the acquireChannelCount was already "1" so new channel ould not be created cause of maxChannelsLimit=1.
Modifications:
The suggested approach modifies the SimpleChannelPool in a way so that when channel detected to be unhealthy it calls private method SimpleChannelPool.acquireHealthyFromPoolOrNew() which guarantees that SimpleChannelPool actually either finds a healthy channel in the pool and returns it or causes the promise.cause() in case when new channel was failed to be created.
Result:
The ```acquiredChannelCount``` is now calculated correctly as a result of SimpleChannelPool.acquire() of not being recursive on overridable acquire method.
Motiviation:
The current read loops don't fascilitate reading a maximum amount of bytes. This capability is useful to have more fine grain control over how much data is injested.
Modifications:
- Add a setMaxBytesPerRead(int) and getMaxBytesPerRead() to ChannelConfig
- Add a setMaxBytesPerIndividualRead(int) and getMaxBytesPerIndividualRead to ChannelConfig
- Add methods to RecvByteBufAllocator so that a pluggable scheme can be used to control the behavior of the read loop.
- Modify read loop for all transport types to respect the new RecvByteBufAllocator API
Result:
The ability to control how many bytes are read for each read operation/loop, and a more extensible read loop.
Motivation:
We don't decrease acquired channel count in FixedChannelPool when timeout occurs by AcquireTimeoutAction.NEW and eventually fails.
Modifications:
Set AcquireTask.acquired=true to call decrementAndRunTaskQueue when timeout action fails.
Result:
Acquired channel count decreases correctly.
Motivation:
We missed to correctly count acquired channels in FixedChannelPool which could produce an assert error.
Modifications:
Only try to decrement acquired count if the channel was really acuired.
Result:
No more assert error possible.
Motivation:
If the Channel is already closed when the PendingWriteQueue is created it will generate a NPE when add or remove is called later.
Modifications:
Add null checks to guard against NPE.
Result:
No more NPE possible.
Motivation:
Test was leaving composite buffers taken from the queue unreleased.
Modifications:
Make the test release buffers.
Result:
Nagging about leaked buffers should stop.
Motivation:
Simplifies writing code that needs to merge or slice a sequence of buffer & promise pairs into chunks of arbitrary sizes.
For example in HTTP2 we merge or split buffers across fixed-size DATA frame boundaries.
Modifications:
Add new utility class CoalescingBufferQueue
Result:
Following this change HTTP2 code will switch to use it instead of CompositeByteBuffer for DATA frame coalescing.
Motivation:
While cherry-picked 11f9e9084b I changed the EmbeddedChannel implementation to not allow no ChannelHandlers when constructing it.
This was done by mistake.
Modifications:
Revert change and add unit test.
Result:
Restore old behavior.
Motivation:
When using an EmbeddedChannel often it either does inbound or outbound processing which means we only often need one queue.
Modifications:
Lazy init the inbound and outbound message queues.
Result:
Less memory usage.
Motivation:
At the moment we directly closed the Channel when an exception accoured durring initChannel(...) without giving the user any way to do extra or special handling.
Modifications:
Handle the exception in exceptionCaught(...) of the ChannelInitializer which will by default log and close the Channel. This way the user can override this.
Result:
More felixible handling of exceptions.
Motivation:
Currently in EmbeddedChannel we add the ChannelHandlers before the Channel is registered which leads to have the handlerAdded(...) callback
be called from outside the EventLoop and also prevent the user to obtain a reference to the EventLoop in the callback itself.
Modifications:
Delay adding ChannelHandlers until EmbeddedChannel is registered.
Result:
Correctly call handlerAdded(...) after EmbeddedChannel is registered.
Motivation:
If you set a ChannelHandler via ServerBootstrap.handler(...) it is added to the ChannelPipeline before the Channel is registered. This will lead to and IllegalStateException if a user tries to access the EventLoop in the ChannelHandler.handlerAdded(...) method.
Modifications:
Delay the adding of the ChannelHandler until the Channel was registered.
Result:
No more IllegalStateException.
Motivation:
Only one of the three FixedChannelPool constructors checks for the constructor
arguments. Therfore it was possible to create a pool with zero maxConnections.
This change chains all constructors together, so that the last one
in the chain always checks the validity of the arguments, regardless of the
constructor used.
Result:
It is no longer possible to create a FixedChannelPool instance with invalid
maxConnections or maxPendingAcquires parameters.
Motivation:
FixedChannelPool should enforce a number of maximal used channels, but due a bug we fail to correctly enforce this.
Modifications:
Change check to correctly only acquire channel if we not hit the limit yet.
Result:
Correct limiting.
Motivation:
To avoid buffering too much it would be useful to get an estimate of how many bytes can be written to a Channel before it becomes unwritable.
Modifications:
- Update the Channel interface to support 2 new methods. 1 to give how many bytes before unwritable. 1 to give how many bytes before writable.
- Update the AbstractChannel implementation to delegate to the ChannelOutboundBuffer.
Result:
The Channel interface supports 2 new methods which provide more visibility into writability.
Motivation:
It's useful to be able to be notified once all Channels that are part of the ChannelGroup are notified. This can for example be useful if you want to do a graceful shutdown.
Modifications:
- Add ChannelGroup.newCloseFuture(...) which will be notified once all Channels are notified that are part of the ChannelGroup at the time of calling.
Result:
Easier to be notified once all Channels within a ChannelGroup are closed.
Motiviation:
There are currently no accessors which provide visbility into how many bytes must be written in order for a writability change to occur. This feature would be useful for codecs which intent to control how many bytes are queued at any given time.
Modifications:
- add bytesBeforeUnWritable() which will give the number of bytes before the buffer (and associated channel) transitions to not writable
- add bytesBeforeWritable() which will give the number of bytes that must be drained from the queue until the channel becomes writable.
Result:
More visibility into writability for the ChannelOutboundBuffer.
Motivation:
the ByteBuffer[] that we keep in the ThreadLocal are never nulled out which can lead to have ByteBuffer instances sit there forever.
This is even a bigger problem if nioBuffer() of ByteBuffer returns a new ByteBuffer that can not be destroyed by ByteBuffer.release().
Modifications:
Null out ByteBuffer array after processing.
Result:
No more dangling references after done.
Motivation:
SingleThreadEventLoopTest.testScheduleTaskAtFixedRate() fails often due to:
- too little tolerance
- incorrect assertion (it compares only with the previous timestamp)
Modifications:
- Increase the timestamp difference tolerance from 10ms to 20ms
- Improve the timestamp assertion so that the comparison is performed against the first recorded timestamp
- Misc: Fix broken Javadoc tag
Result:
More build stability
Motivation:
When trying to write more then Integer.MAX_VALUE / SSIZE_MAX via writev(...) the OS may return EINVAL depending on the kernel or the actual OS (bsd / osx always return EINVAL). This will trigger an IOException.
Modifications:
Never try to write more then Integer.MAX_VALUE / SSIZE_MAX when using writev.
Result:
No more IOException when write more data then Integer.MAX_VALUE / SSIZE_MAX via writev.
Motivation:
In the SslHandler we schedule a timeout at which we close the Channel if a timeout was detected during close_notify. Because this can race with notify the flushFuture we can see an IllegalStateException when the Channel is closed.
Modifications:
- Use a trySuccess() and tryFailure(...) to guard against race.
Result:
No more race.
Motivation:
We should not trigger channelWritabilityChanged during failing message when we are about to close the Channel as otherwise the use may try again writing even if the Channel is about to get closed.
Modifications:
Add new boolean param to ChannelOutboundBuffer.failFlushed(...) which allows to specify if we should notify or not.
Result:
channelWritabilityChanged is not triggered anymore if we cloe the Channel because of an IOException during write.
Motivation:
Previously, we deferred the closing of the Channel when we were flushing. This is problematic as this means that if the user adds a ChannelFutureListener, that will close the Channel, the closing will not happen until we are done with flushing. This can lead to more data is sent than expected.
Modifications:
- Do not defer closing when in flush
Result:
Correctly respect order of events and closing the Channel ASAP
Motivation:
The semantic of LocalChannel.doWrite(...) were a bit off as it notified the ChannelFuture before the data was actual moved to the peer buffer.
Modifications:
- Use our MPSC queue as inbound buffer
- Directly copy to data to the inbound buffer of the peer and either success or fail the promise after each copy.
Result:
Correct semantic and less memory copies.
Motiviation:
If user events or excpetions reach the tail end of the pipeline they are not released. This could result in buffer leaks.
Motivation:
- Use the ReferenceCountUtil.release to release objects for the userEventTriggered and exceptionCaught methods on DefaultChannelPipeline
Result:
2 less areas where buffer leaks can occur.
Motivation:
There are various known issues in netty-codec-dns:
- Message types are not interfaces, which can make it difficult for a
user to implement his/her own message implementation.
- Some class names and field names do not match with the terms in the
RFC.
- The support for decoding a DNS record was limited. A user had to
encode and decode by him/herself.
- The separation of DnsHeader from DnsMessage was unnecessary, although
it is fine conceptually.
- Buffer leak caused by DnsMessage was difficult to analyze, because the
leak detector tracks down the underlying ByteBuf rather than the
DnsMessage itself.
- DnsMessage assumes DNS-over-UDP.
- To send an EDNS message, a user have to create a new DNS record class
instance unnecessarily.
Modifications:
- Make all message types interfaces and add default implementations
- Rename some classes, properties, and constants to match the RFCs
- DnsResource -> DnsRecord
- DnsType -> DnsRecordType
- and many more
- Remove DnsClass and use an integer to support EDNS better
- Add DnsRecordEncoder/DnsRecordDecoder and their default
implementations
- DnsRecord does not require RDATA to be ByteBuf anymore.
- Add DnsRawRecord as the catch-all record type
- Merge DnsHeader into DnsMessage
- Make ResourceLeakDetector track AbstractDnsMessage
- Remove DnsMessage.sender/recipient properties
- Wrap DnsMessage with AddressedEnvelope
- Add DatagramDnsQuest and DatagramDnsResponse for ease of use
- Rename DnsQueryEncoder to DatagramDnsQueryEncoder
- Rename DnsResponseDecoder to DatagramDnsResponseDecoder
- Miscellaneous changes
- Add StringUtil.TAB
Result:
- Cleaner APi
- Can support DNS-over-TCP more easily in the future
- Reduced memory footprint in the default DnsQuery/Response
implementations
- Better leak tracking for DnsMessages
- Possibility to introduce new DnsRecord types in the future and provide
full record encoder/decoder implementation.
- No unnecessary instantiation for an EDNS pseudo resource record
Motivation:
Many projects need some kind a Channel/Connection pool implementation. While the protocols are different many things can be shared, so we should provide a generic API and implementation.
Modifications:
Add ChannelPool / ChannelPoolMap API and implementations.
Result:
Reusable / Generic pool implementation that users can use.
Motivation:
Because of a bug we missed to fail the connect future when doClose() is called. This can lead to a future which is never notified and so may lead to deadlocks in user-programs.
Modifications:
Correctly fail the connect future when doClose() is called and the connection was not established yet.
Result:
Connect future is always notified.
Motivation:
Each different *ChannelOption did extend ChannelOption in 4.0, which we changed in 4.1. This is a breaking change in terms of the API so we need to ensure we keep the old hierarchy.
Modifications:
- Let all *ChannelOption extend ChannelOption
- Add back constructor and mark it as @deprecated
Result:
No API breakage between 4.0 and 4.1
Related: #3464
Motivation:
When a connection attempt is failed,
NioSocketChannelUnsafe.closeExecutor() triggers a SocketException,
suppressing the channelUnregistered() event.
Modification:
Do not attempt to get SO_LINGER value when a socket is not open yet.
Result:
One less bug
Motivation:
At the moment when EmbeddedChannel is used and a ChannelHandler tries to schedule and task it will throw an UnsupportedOperationException. This makes it impossible to test these handlers or even reuse them with EmbeddedChannel.
Modifications:
- Factor out reusable scheduling code into AbstractSchedulingEventExecutor
- Let EmbeddedEventLoop and SingleThreadEventExecutor extend AbstractSchedulingEventExecutor
- add EmbbededChannel.runScheduledPendingTasks() which allows to run all scheduled tasks that are ready
Result:
Embeddedchannel is now usable even with ChannelHandler that try to schedule tasks.
Motivation:
We should allow to get a ChannelOption/AttributeKey from a String. This will make it a lot easier to make use of configuration files in applications.
Modifications:
- Add exists(...), newInstance(...) method to ChannelOption and AttributeKey and alter valueOf(...) to return an existing instance for a String or create one.
- Add unit tests.
Result:
Much more flexible usage of ChannelOption and AttributeKey.
Motivation:
As we plan to have other native transports soon (like a kqueue transport) we should move unix classes/interfaces out of the epoll package so we
introduce other implementations without breaking stuff before the next stable release.
Modifications:
Create a new io.netty.channel.unix package and move stuff over there.
Result:
Possible to introduce other native impls beside epoll.
Motivation:
If SO_LINGER is used shutdownOutput() and close() syscalls will block until either all data was send or until the timeout exceed. This is a problem when we try to execute them on the EventLoop as this means the EventLoop may be blocked and so can not process any other I/O.
Modifications:
- Add AbstractUnsafe.closeExecutor() which returns null by default and use this Executor for close if not null.
- Override the closeExecutor() in NioSocketChannel and EpollSocketChannel and return GlobalEventExecutor.INSTANCE if getSoLinger() > 0
- use closeExecutor() in shutdownInput(...) in NioSocketChannel and EpollSocketChannel
Result:
No more blocking of the EventLoop if SO_LINGER is used and shutdownOutput() or close() is called.
Motivation:
isRoot() is an expensive operation. We should avoid calling it if
possible.
Modifications:
Move the isRoot() checks to the end of the 'if' block, so that isRoot()
is evaluated only when really necessary.
Result:
isRoot() is evaluated only when SO_BROADCAST is set and the bind address
is anylocal address.
Related:
- 27a25e29f7
Motivation:
The commit mentioned above introduced a regression where
channelReadComplete() event is swallowed by a handler which was added
dynamically.
Modifications:
Do not suppress channelReadComplete() if the current handler's
channelRead() method was not invoked at all, so that a just-added
handler does not suppress channelReadComplete().
Result:
Regression is gone, and channelReadComplete() is invoked when necessary.
Motivation:
Even if a handler called ctx.fireChannelReadComplete(), the next handler
should not get its channelReadComplete() invoked if fireChannelRead()
was not invoked before.
Modifications:
- Ensure channelReadComplete() is invoked only when the handler of the
current context actually produced a message, because otherwise there's
no point of triggering channelReadComplete().
i.e. channelReadComplete() must follow channelRead().
- Fix a bug where ctx.read() was not called if the handler of the
current context did not produce any message, making the connection
stall. Read the new comment for more information.
Result:
- channelReadComplete() is invoked only when it makes sense.
- No stale connection
Motivation:
Because of a re-entrance bug in PendingWriteQueue it was possible to get the queue corrupted and also trigger an IllegalStateException caused by multiple recycling of the internal PendingWrite objects.
Modifications:
- Correctly guard against re-entrance
Result:
No more IllegalStateException possible
Motiviation:
When using domain sockets on linux it is supported to recv and send file descriptors. This can be used to pass around for example sockets.
Modifications:
- Add support for recv and send file descriptors when using EpollDomainSocketChannel.
- Allow to obtain the file descriptor for an Epoll*Channel so it can be send via domain sockets.
Result:
recv and send of file descriptors is supported now.
Motivation:
As the ByteBuf is not set to null after release it we may try to release it again in handleReadException()
Modifications:
- set ByteBuf to null to avoid another byteBuf.release() to be called in handleReadException()
Result:
No IllegalReferenceCountException anymore
Motivation:
Fix a minor documentation bug in
ChannelHandlerContext#fireChannelReadComplete.
Modifications:
ChannelHandlerContext#fireChannelReadComplete no longer references an
incorrect method in its javadoc.
Results:
Documentation is correct.
Motivation:
We only provided a constructor in DefaultFileRegion that takes a FileChannel which means the File itself needs to get opened on construction. This has the problem that if you want to write a lot of Files very fast you may end up with may open FD's even if they are not needed yet. This can lead to hit the open FD limit of the OS.
Modifications:
Add a new constructor to DefaultFileRegion which allows to construct it from a File. The FileChannel will only be obtained when transferTo(...) is called or the DefaultFileRegion is explicit open'ed via open() (this is needed for the native epoll transport)
Result:
Less resource usage when writing a lot of DefaultFileRegion.
Related: #3212
Motivation:
When SslHandler and ChunkedWriteHandler exists in a pipeline together,
it is possible that ChunkedWriteHandler.channelWritabilityChanged()
invokes SslHandler.flush() and vice versa. Because they can feed each
other (i.e. ChunkedWriteHandler.channelWritabilityChanged() ->
SslHandler.flush() -> ChunkedWriteHandler.channelWritabilityChanged() ->
..), they can fall into an inconsistent state due to reentrance (e.g.
bad MAC record at the remote peer due to incorrect ordering.)
Modifications:
- Trigger channelWritabilityChanged() using EventLoop.execute() when
there's a chance where channelWritabilityChanged() can cause a
reentrance issue
- Fix test failures caused by the modification
Result:
Fix the handler reentrance issues related with a
channelWritabilityChanged() event
Related: #3212
Motivation:
PendingWriteQueue.recycle() updates its data structure after triggering
a channelWritabilityChanged() event. It causes a rare corruption such as
double free when channelWritabilityChanged() method accesses the
PendingWriteQueue.
Modifications:
Update the state of PendingWriteQueue before triggering an event.
Result:
Fix a rare double-free problem
Related: #3190
Motivation:
When an outbound handler method raises an exception, its promise is
marked as failed. If the promise is done already, the exception is
logged.
When the promise is void, exceptionCaught() must be triggered to notify
a user. However, ChannelHandlerInvokerUtil simply swallows it.
Modifications:
Do not swallow an exception when the promise is void.
Result:
A user who uses a void promise for an outbound operation will be
notified on failure.
Related: #3189
Motivation:
OIO transport implementations block for at most 1 second to wait for
additional messages (or accepted connections).
However, because AbstractOioMessageChannel defers the channelRead()
events for the messages read so far until there's nothing to read up to
maxMessagesPerRead, any read operation will be followed by a 1-second
delay.
Modifications:
Fire channelRead() events as soon as doRead() returns so that there is
no 1 second delay between the actual read and the channelRead() event.
Result:
No more weird 1-second delay
Related: #3156
Motivation:
Let's say we have a channel with the following pipeline configuration:
HEAD --> [E1] H1 --> [E2] H2 --> TAIL
when the channel is deregistered, the channelUnregistered() methods of
H1 and H2 will be invoked from the executor thread of E1 and E2
respectively. To ensure that the channelUnregistered() methods are
invoked from the correct thread, new one-time tasks will be created
accordingly and be scheduled via Executor.execute(Runnable).
As soon as the one-time tasks are scheduled,
DefaultChannelPipeline.fireChannelUnregistered() will start to remove
all handlers from the pipeline via teardownAll(). This process is
performed in reversed order of event propagation. i.e. H2 is removed
first, and then H1 is removed.
If the channelUnregistered() event has been passed to H2 before H2 is
removed, a user does not see any problem.
If H2 has been removed before channelUnregistered() event is passed to
H2, a user will often see the following confusing warning message:
An exceptionCaught() event was fired, and it reached at the tail of
the pipeline. It usually means the last handler in the pipeline did
not handle the exception.
Modifications:
To ensure that the handlers are removed *after* all events are
propagated, traverse the pipeline in ascending order before performing
the actual removal.
Result:
A user does not get the confusing warning message anymore.
Motivation:
AbstractUnsafe considers two possibilities during channel registration. First,
the channel may be an outgoing connection, in which case it will be registered
before becoming active. Second, the channel may be an incoming connection in,
which case the channel will already be active when it is registered. To handle
the second case, AbstractUnsafe checks if the channel is active after
registration and calls ChannelPipeline.fireChannelActive() if so. However, if
an active channel is deregistered and then re-registered this logic causes a
second fireChannelActive() to be invoked. This is unexpected; it is reasonable
for handlers to assume that this method will only be invoked once per channel.
Modifications:
This change introduces a flag into AbstractUnsafe to recognize if this is the
first or a subsequent registration. ChannelPipeline.fireChannelActive() is only
possible for the first registration.
Result:
ChannelPipeline.fireChannelActive() is only called once.
Motivation:
Found performance issues via FindBugs and PMD.
Modifications:
- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.
Result:
Performance improvements.
Motivation:
ChannelPromiseAggregator and ChannelPromiseNotifiers only allow
consumers to work with Channels as the result type. Generic versions
of these classes allow consumers to aggregate or broadcast the results
of an asynchronous execution with other result types.
Modifications:
Add PromiseAggregator and PromiseNotifier. Add unit tests for both.
Remove code in ChannelPromiseAggregator and ChannelPromiseNotifier and
modify them to extend the new base classes.
Result:
Consumers can now aggregate or broadcast the results of an asynchronous
execution with results types other than Channel.
Related: #2945
Motivation:
Some special handlers such as TrafficShapingHandler need to override the
writability of a Channel to throttle the outbound traffic.
Modifications:
Add a new indexed property called 'user-defined writability flag' to
ChannelOutboundBuffer so that a handler can override the writability of
a Channel easily.
Result:
A handler can override the writability of a Channel using an unsafe API.
For example:
Channel ch = ...;
ch.unsafe().outboundBuffer().setUserDefinedWritability(1, false);
Related: #2034
Motivation:
Some users want to mock Bootstrap (or ServerBootstrap), and thus they
should not be final but be fully overridable and extensible.
Modifications:
Remove finals wherever possible
Result:
@daschl is happy.
Related: #2964
Motivation:
Writing a zero-length FileRegion to an NIO channel will lead to an
infinite loop.
Modification:
- Do not write a zero-length FileRegion by protecting with proper 'if'.
- Update the testsuite
Result:
Another bug fixed
Motivation:
So far, we relied on the domain name resolution mechanism provided by
JDK. It served its purpose very well, but had the following
shortcomings:
- Domain name resolution is performed in a blocking manner.
This becomes a problem when a user has to connect to thousands of
different hosts. e.g. web crawlers
- It is impossible to employ an alternative cache/retry policy.
e.g. lower/upper bound in TTL, round-robin
- It is impossible to employ an alternative name resolution mechanism.
e.g. Zookeeper-based name resolver
Modification:
- Add the resolver API in the new module: netty-resolver
- Implement the DNS-based resolver: netty-resolver-dns
.. which uses netty-codec-dns
- Make ChannelFactory reusable because it's now used by
io.netty.bootstrap, io.netty.resolver.dns, and potentially by other
modules in the future
- Move ChannelFactory from io.netty.bootstrap to io.netty.channel
- Deprecate the old ChannelFactory
- Add ReflectiveChannelFactory
Result:
It is trivial to resolve a large number of domain names asynchronously.
Motivation:
When a datagram packet is sent to a destination where nobody actually listens to,
the server O/S will respond with an ICMP Port Unreachable packet.
The ICMP Port Unreachable packet is translated into PortUnreachableException by JDK.
PortUnreachableException is not a harmful exception that prevents a user from sending a datagram.
Therefore, we should not close a datagram channel when PortUnreachableException is caught.
Modifications:
- Do not close a channel when the caught exception is PortUnreachableException.
Result:
A datagram channel is not closed unexpectedly anymore.
Motivation:
JDK's exception messages triggered by a connection attempt failure do
not contain the related remote address in its message. We currently
append the remote address to ConnectException's message, but I found
that we need to cover more exception types such as SocketException.
Modifications:
- Add AbstractUnsafe.annotateConnectException() to de-duplicate the
code that appends the remote address
Result:
- Less duplication
- A transport implementor can annotate connection attempt failure
message more easily
Motivation:
There's no way to generate the name of a handler being newly added
automatically and reliably.
For example, let's say you have a routine that adds a set of handlers to
a pipeline using addBefore() or addAfter(). Because addBefore() and
addAfter() always require non-conflicting non-null handler name, making
the multiple invocation of the routine on the same pipeline is
non-trivial.
Modifications:
- If a user specifies null as the name of the new handler,
DefaultChannelPipeline generates one.
- Update the documentation of ChannelPipeline to match the new behavior
Result:
A user doesn't need to worry about name conflicts anymore.
Motiviation:
Before this change, autoRead was a volatile boolean accessed directly. Any thread that invoked the DefaultChannelConfig#setAutoRead(boolean) method would read the current value of autoRead, and then set a new value. If the old value did not match the new value, some action would be immediately taken as part of the same method call.
As volatile only provides happens-before consistency, there was no guarantee that the calling thread was actually the thread mutating the state of the autoRead variable (such that it should be the one to invoke the follow-up actions). For example, with 3 threads:
* Thread 1: get = false
* Thread 1: set = true
* Thread 1: invokes read()
* Thread 2: get = true
* Thread 3: get = true
* Thread 2: set = false
* Thread 2: invokes autoReadCleared()
* Event Loop receives notification from the Selector that data is available, but as autoRead has been cleared, cancels the operation and removes read interest
* Thread 3: set = true
This results in a livelock - autoRead is set true, but no reads will happen even if data is available (as readyOps). The only way around this livelock currently is to set autoRead to false, and then back to true.
Modifications:
Write access to the autoRead variable is now made using the getAndSet() method of an AtomicIntegerFieldUpdater, AUTOREAD_UPDATER. This also changed the type of the underlying autoRead variable to be an integer, as no AtomicBooleanFieldUpdater class exists. Boolean logic is retained by assuming that 1 is true and 0 is false.
Result:
There is no longer a race condition between retrieving the old value of the autoRead variable and setting a new value.
Motivation:
We used the wrong EventExecutor to notify for bind failures if a late registration was done.
Modifications:
Use the correct EventExecutor to notify and only use the GlobelEventExecutor if the registration fails itself.
Result:
The correct Thread will do the notification.
When a ChannelOutboundBuffer contains ByteBufs followed by a FileRegion,
removeBytes() will fail with a ClassCastException. It should break the
loop instead.
f31c630c8c was causing
SocketGatheringWriteTest to fail because it does not take the case where
an empty buffer exists in a gathering write.
When there is an empty buffer in a gathering write, the number of
buffers returned by ChannelOutboundBuffer.nioBuffer() and the actual
number of write attemps can differ.
To remove the write requests correctly, a byte transport must use
ChannelOutboundBuffer.removeBytes()
Motivation:
Because of an incorrect logic in teh EmbeddedChannel constructor it is not possible to use EmbeddedChannel with a ChannelInitializer as constructor argument. This is because it adds the internal LastInboundHandler to its ChannelPipeline before it register itself to the EventLoop.
Modifications:
First register self to EventLoop before add LastInboundHandler to the ChannelPipeline.
Result:
It's now possible to use EmbeddedChannel with ChannelInitializer.
Motivation:
Due a regression NioSocketChannel.doWrite(...) will throw a ClassCastException if you do something like:
channel.write(bytebuf);
channel.write(fileregion);
channel.flush();
Modifications:
Correctly handle writing of different message types by using the correct message count while loop over them.
Result:
No more ClassCastException
Motivation:
The previous fix did disable the caching of ByteBuffers completely which can cause performance regressions. This fix makes sure we use nioBuffers() for all writes in NioSocketChannel and so prevent data-corruptions. This is still kind of a workaround which will be replaced by a more fundamental fix later.
Modifications:
- Revert 4059c9f354
- Use nioBuffers() for all writes to prevent data-corruption
Result:
No more data-corruption but still retain the original speed.
Motivation:
At the moment we expand the ByteBuffer[] when we have more then 1024 ByteBuffer to write and replace the stored instance in its FastThreadLocal. This is not needed and may even harm performance on linux as IOV_MAX is 1024 and so this may cause the JVM to do an array copy.
Modifications:
Just exit the nioBuffers() method if we can not fit more ByteBuffer in the array. This way we will pick them up on the next call.
Result:
Remove uncessary array copy and simplify the code.
Motivation:
We cache the ByteBuffers in ChannelOutboundBuffer.nioBuffers() for the Entries in the ChannelOutboundBuffer to reduce some overhead. The problem is this can lead to data-corruption if an incomplete write happens and next time we try to do a non-gathering write.
To fix this we should remove the caching which does not help a lot anyway and just make the code buggy.
Modifications:
Remove the caching of ByteBuffers.
Result:
No more data-corruption.
Motivation:
At the moment it's only possible for a user to set the RecvByteBufAllocator for a Channel but not access the Handle once it is assigned. This makes it hard to write more flexible implementations.
Modifications:
Add a new method to the Channel.Unsafe to allow access the the used Handle for the Channel. The RecvByteBufAllocator.Handle is created lazily.
Result:
It's possible to write more flexible implementatons that allow to adjust stuff on the fly for a Handle that is used by a Channel
Motivation:
Sometimes ChannelHandler need to queue writes to some point and then process these. We currently have no datastructure for this so the user will use an Queue or something like this. The problem is with this Channel.isWritable() will not work as expected and so the user risk to write to fast. That's exactly what happened in our SslHandler. For this purpose we need to add a special datastructure which will also take care of update the Channel and so be sure that Channel.isWritable() works as expected.
Modifications:
- Add PendingWriteQueue which can be used for this purpose
- Make use of PendingWriteQueue in SslHandler
Result:
It is now possible to queue writes in a ChannelHandler and still have Channel.isWritable() working as expected. This also fixes#2752.
Motivation:
We did various changes related to the ChannelOutboundBuffer in 4.0 branch. This commit port all of them over and so make sure our branches are synced in terms of these changes.
Related to [#2734], [#2709], [#2729], [#2710] and [#2693] .
Modification:
Port all changes that was done on the ChannelOutboundBuffer.
This includes the port of the following commits:
- 73dfd7c01b
- 997d8c32d2
- e282e504f1
- 5e5d1a58fd
- 8ee3575e72
- d6f0d12a86
- 16e50765d1
- 3f3e66c31a
Result:
- Less memory usage by ChannelOutboundBuffer
- Same code as in 4.0 branch
- Make it possible to use ChannelOutboundBuffer with Channel implementation that not extends AbstractChannel
