Commit Graph

890 Commits

Author SHA1 Message Date
Carl Mastrangelo
16b1dbdf92 Motivation: Resource Leak Detector (RLD) tries to helpfully indicate where an object was last accessed and report the accesses in the case the object was not cleaned up. It handles lightly used objects well, but drops all but the last few accesses.
Configuring this is tough because there is split between highly shared (and accessed) objects and lightly accessed objects.

Modification:
There are a number of changes here.  In relative order of importance:

API / Functionality changes:
* Max records and max sample records are gone.  Only "target" records, the number of records tries to retain is exposed.
* Records are sampled based on the number of already stored records.  The likelihood of recording a new sample is `2^(-n)`, where `n` is the number of currently stored elements.
* Records are stored in a concurrent stack structure rather than a list.  This avoids a head and tail.  Since the stack is only read once, there is no need to maintain head and tail pointers
* The properties of this imply that the very first and very last access are always recorded.  When deciding to sample, the top element is replaced rather than pushed.
* Samples that happen between the first and last accesses now have a chance of being recorded.  Previously only the final few were kept.
* Sampling is no longer deterministic.  Previously, a deterministic access pattern meant that you could conceivably always miss some access points.
* Sampling has a linear ramp for low values and and exponentially backs off roughly equal to 2^n.  This means that for 1,000,000 accesses, about 20 will actually be kept.  I have an elegant proof for this which is too large to fit in this commit message.

Code changes:
* All locks are gone.  Because sampling rarely needs to do a write, there is almost 0 contention.  The dropped records counter is slightly contentious, but this could be removed or changed to a LongAdder.  This was not done because of memory concerns.
* Stack trace exclusion is done outside of RLD.  Classes can opt to remove some of their methods.
* Stack trace exclusion is faster, since it uses String.equals, often getting a pointer compare due to interning.  Previously it used contains()
* Leak printing is outputted fairly differently.  I tried to preserve as much of the original formatting as possible, but some things didn't make sense to keep.

Result:
More useful leak reporting.

Faster:
```
Before:
Benchmark                                           (recordTimes)   Mode  Cnt       Score      Error  Units
ResourceLeakDetectorRecordBenchmark.record                      8  thrpt   20  136293.404 ± 7669.454  ops/s
ResourceLeakDetectorRecordBenchmark.record                     16  thrpt   20   72805.720 ± 3710.864  ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint              8  thrpt   20  139131.215 ± 4882.751  ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint             16  thrpt   20   74146.313 ± 4999.246  ops/s

After:
Benchmark                                           (recordTimes)   Mode  Cnt       Score      Error  Units
ResourceLeakDetectorRecordBenchmark.record                      8  thrpt   20  155281.969 ± 5301.399  ops/s
ResourceLeakDetectorRecordBenchmark.record                     16  thrpt   20   77866.239 ± 3821.054  ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint              8  thrpt   20  153360.036 ± 8611.353  ops/s
ResourceLeakDetectorRecordBenchmark.recordWithHint             16  thrpt   20   78670.804 ± 2399.149  ops/s
```
2017-10-19 12:21:21 -07:00
Carl Mastrangelo
83a19d5650 Optimistically update ref counts
Motivation:
Highly retained and released objects have contention on their ref
count.  Currently, the ref count is updated using compareAndSet
with care to make sure the count doesn't overflow, double free, or
revive the object.

Profiling has shown that a non trivial (~1%) of CPU time on gRPC
latency benchmarks is from the ref count updating.

Modification:
Rather than pessimistically assuming the ref count will be invalid,
optimistically update it assuming it will be.  If the update was
wrong, then use the slow path to revert the change and throw an
execption.  Most of the time, the ref counts are correct.

This changes from using compareAndSet to getAndAdd, which emits a
different CPU instruction on x86 (CMPXCHG to XADD).  Because the
CPU knows it will modifiy the memory, it can avoid contention.

On a highly contended machine, this can be about 2x faster.

There is a downside to the new approach.  The ref counters can
temporarily enter invalid states if over retained or over released.
The code does handle these overflow and underflow scenarios, but it
is possible that another concurrent access may push the failure to
a different location.  For example:

Time 1 Thread 1: obj.retain(INT_MAX - 1)
Time 2 Thread 1: obj.retain(2)
Time 2 Thread 2: obj.retain(1)

Previously Thread 2 would always succeed and Thread 1 would always
fail on the second access.  Now, thread 2 could fail while thread 1
is rolling back its change.

====

There are a few reasons why I think this is okay:

1. Buggy code is going to have bugs.  An exception _is_ going to be
   thrown.  This just causes the other threads to notice the state
   is messed up and stop early.
2. If high retention counts are a use case, then ref count should
   be a long rather than an int.
3. The critical section is greatly reduced compared to the previous
   version, so the likelihood of this happening is lower
4. On error, the code always rollsback the change atomically, so
   there is no possibility of corruption.

Result:
Faster refcounting

```
BEFORE:

Benchmark                                                                                             (delay)    Mode      Cnt         Score    Error  Units
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                            1  sample  2901361       804.579 ±  1.835  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                           10  sample  3038729       785.376 ± 16.471  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                          100  sample  2899401       817.392 ±  6.668  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                         1000  sample  3650566      2077.700 ±  0.600  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                        10000  sample  3005467     19949.334 ±  4.243  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                          1  sample   456091        48.610 ±  1.162  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                         10  sample   732051        62.599 ±  0.815  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                        100  sample   778925       228.629 ±  1.205  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                       1000  sample   633682      2002.987 ±  2.856  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                      10000  sample   506442     19735.345 ± 12.312  ns/op

AFTER:
Benchmark                                                                                             (delay)    Mode      Cnt         Score    Error  Units
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                            1  sample  3761980       383.436 ±  1.315  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                           10  sample  3667304       474.429 ±  1.101  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                          100  sample  3039374       479.267 ±  0.435  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                         1000  sample  3709210      2044.603 ±  0.989  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_contended                                        10000  sample  3011591     19904.227 ± 18.025  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                          1  sample   494975        52.269 ±  8.345  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                         10  sample   771094        62.290 ±  0.795  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                        100  sample   763230       235.044 ±  1.552  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                       1000  sample   634037      2006.578 ±  3.574  ns/op
AbstractReferenceCountedByteBufBenchmark.retainRelease_uncontended                                      10000  sample   506284     19742.605 ± 13.729  ns/op

```
2017-10-04 08:42:33 +02:00
回眸,境界
06da0ceb64 Fix typo in comment. 2017-10-02 08:16:22 +02:00
Norman Maurer
625a7426cd [maven-release-plugin] prepare for next development iteration 2017-09-25 06:12:32 +02:00
Norman Maurer
f57d8f00e1 [maven-release-plugin] prepare release netty-4.1.16.Final 2017-09-25 06:12:16 +02:00
Carl Mastrangelo
003c8cc7ab Expose all defaults on PooledByteBufAllocator
Motivation:
Most, but not all defaults are statically exposed on
PooledByteBufAllocator.  This makes it cumbersome to make a custom
allocator where most of the defaults remain the same.

Modification:
Expose useCacheForAllThreads, and Direct preferred.  The latter is
needed because it is under the internal package, and public code
should probably not depend on it.

Result:
More customizeable allocators
2017-09-20 21:48:53 -07:00
Norman Maurer
9d56439aa1 Make UnpooledDirectByteBuf, UnpooledHeapByteBuf and UnpooledUnsafeDirectByteBuf constructors public.
Motivation:

The constrcutors a protected atm but the classes are public. We should make the constructors public as well to make it easier to write your own ByteBufAllocator.

Modifications:

Change constructors to be public and add some javadocs.

Result:

Easier to create own ByteBufAllocator.
2017-09-18 21:42:46 -07:00
Carl Mastrangelo
d2cb51bc2e Enable PooledByteBufAllocator to work, event without a cache
Motivation:
`useCacheForAllThreads` may be false which disables memory caching
on non netty threads.  Setting this argument or the system property
makes it impossible to use `PooledByteBufAllocator`.

Modifications:

Delayed the check of `freeSweepAllocationThreshold` in
`PoolThreadCache` to after it knows there will be any caches in
use.  Additionally, check if the caches will have any data in them
(rather than allocating a 0-length array).

A test case is also added that fails without this change.

Results:

Fixes #7194
2017-09-08 10:20:45 +02:00
Norman Maurer
bca35b0449 Allow to construct UnpooledByteBufAllocator that explictly always use sun.misc.Cleaner
Motivation:

When the user want to have the direct memory explicitly managed by the GC (just as java.nio does) it is useful to be able to construct an UnpooledByteBufAllocator that allows this without the chances to see any memory leak.

Modifications:

Allow to explicitly disable the usage of reflection to construct direct ByteBufs and so be sure these will be collected by GC.

Result:

More flexible way to use the UnpooledByteBufAllocator.
2017-08-31 12:57:09 +02:00
Carl Mastrangelo
7528e5a11e Use threadsafe setter on Atomic Updaters
Motivation:
The documentation for field updates says:

> Note that the guarantees of the {@code compareAndSet}
> method in this class are weaker than in other atomic classes.
> Because this class cannot ensure that all uses of the field
> are appropriate for purposes of atomic access, it can
> guarantee atomicity only with respect to other invocations of
> {@code compareAndSet} and {@code set} on the same updater.

This implies that volatiles shouldn't use normal assignment; the
updater should set them.

Modifications:
Use setter for field updaters that make use of compareAndSet.

Result:
Concurrency compliant code
2017-08-31 10:14:40 +02:00
Norman Maurer
b967805f32 [maven-release-plugin] prepare for next development iteration 2017-08-24 15:38:22 +02:00
Norman Maurer
da8e010a42 [maven-release-plugin] prepare release netty-4.1.15.Final 2017-08-24 15:37:59 +02:00
Norman Maurer
e487db7836 Use the ByteBufAllocator when copy a ReadOnlyByteBufferBuf and so also be able to release it without the GC when the Cleaner is present.
Motivation:

In ReadOnlyByteBufferBuf.copy(...) we just allocated a ByteBuffer directly and wrapped it. This way it was not possible for us to free the direct memory that was used by the copy without the GC.

Modifications:

- Ensure we use the allocator when create the copy and so be able to release direct memory in a timely manner
- Add unit test
- Depending on if the to be copied buffer is direct or heap based we also allocate the same type on copy.

Result:

Fixes [#7103].
2017-08-16 07:33:10 +02:00
Nikolay Fedorovskikh
0774c91456 Support the little endian floats and doubles by ByteBuf
Motivation:
`ByteBuf` does not have the little endian variant of float/double access methods.

Modifications:
Add support for little endian floats and doubles into `ByteBuf`.

Result:
`ByteBuf` has get/read/set/writeFloatLE() and get/read/set/writeDoubleLE() methods. Fixes [#6576].
2017-08-15 06:24:28 +02:00
louyl
8be9a63c1c FIX endless loop in ByteBufUtil#writeAscii
Motivation:

Missing return in ByteBufUtil#writeAscii causes endless loop

Modifications:

Add return after write finished

Result:

ByteBufUtil#writeAscii is ok
2017-08-12 12:50:00 +02:00
Norman Maurer
52f384b37f [maven-release-plugin] prepare for next development iteration 2017-08-02 12:55:10 +00:00
Norman Maurer
8cc1071881 [maven-release-plugin] prepare release netty-4.1.14.Final 2017-08-02 12:54:51 +00:00
Scott Mitchell
452fd36240 ByteBufs which are not resizable should not throw in ensureWritable(int,boolean)
Motivation:
ByteBuf#ensureWritable(int,boolean) returns an int indicating the status of the resize operation. For buffers that are unmodifiable or cannot be resized this method shouldn't throw but just return 1.
ByteBuf#ensureWriteable(int) should throw unmodifiable buffers.

Modifications:
- ReadOnlyByteBuf should be updated as described above.
- Add a unit test to SslHandler which verifies the read only buffer can be tolerated in the aggregation algorithm.

Result:
Fixes https://github.com/netty/netty/issues/7002.
2017-07-22 08:44:48 -07:00
Norman Maurer
06f64948d5 Add tests to ensure an IllegalReferenceCountException is thrown if set/writeCharSequence is called on a released buffer
Motivation:

We need to ensure we not allow calling set/writeCharsequence on an released ByteBuf.

Modifications:

Add test-cases

Result:

Proves fix of [#6951].
2017-07-21 07:39:32 +02:00
Norman Maurer
4af47f0ced AbstractByteBuf.setCharSequence(...) must not expand buffer
Motivation:

AbstractByteBuf.setCharSequence(...) must not expand the buffer if not enough writable space is present in the buffer to be consistent with all the other set operations.

Modifications:

- Ensure we only exand the buffer on writeCharSequence(...) but not on setCharSequence(...)
- Add unit tests.

Result:

Consistent and correct behavior.
2017-07-19 19:44:53 +02:00
Norman Maurer
d125adec38 AbstractByteBuf.ensureWritable(...) should check if buffer was released
Motivation:

AbstractByteBuf.ensureWritable(...) should check if buffer was released and if so throw an IllegalReferenceCountException

Modifications:

Ensure we throw in all cases.

Result:

More consistent and correct behaviour
2017-07-19 07:34:08 +02:00
louxiu
0ad99310f5 Record release when enable detailed leak detection
Motivation:
It would be easier to find where is missing release call in several retain release calls on a ByteBuf

Modifications:
Remove final modifier on SimpleLeakAwareByteBuf and SimpleLeakAwareByteBuf release function and override it to record release in AdvancedLeakAwareByteBuf and AdvancedLeakAwareCompositeByteBuf

Result:
Release will be recorded when enable detailed leak detection
2017-07-18 09:28:56 +02:00
Scott Mitchell
86e653e04f SslHandler aggregation of plaintext data on write
Motivation:
Each call to SSL_write may introduce about ~100 bytes of overhead. The OpenSslEngine (based upon OpenSSL) is not able to do gathering writes so this means each wrap operation will incur the ~100 byte overhead. This commit attempts to increase goodput by aggregating the plaintext in chunks of <a href="https://tools.ietf.org/html/rfc5246#section-6.2">2^14</a>. If many small chunks are written this can increase goodput, decrease the amount of calls to SSL_write, and decrease overall encryption operations.

Modifications:
- Introduce SslHandlerCoalescingBufferQueue in SslHandler which will aggregate up to 2^14 chunks of plaintext by default
- Introduce SslHandler#setWrapDataSize to control how much data should be aggregated for each write. Aggregation can be disabled by setting this value to <= 0.

Result:
Better goodput when using SslHandler and the OpenSslEngine.
2017-07-10 12:22:08 -07:00
Nikolay Fedorovskikh
df568c739e Use ByteBuf#writeShort/writeMedium instead of writeBytes
Motivation:

1. Some encoders used a `ByteBuf#writeBytes` to write short constant byte array (2-3 bytes). This can be replaced with more faster `ByteBuf#writeShort` or `ByteBuf#writeMedium` which do not access the memory.
2. Two chained calls of the `ByteBuf#setByte` with constants can be replaced with one `ByteBuf#setShort` to reduce index checks.
3. The signature of method `HttpHeadersEncoder#encoderHeader` has an unnecessary `throws`.

Modifications:

1. Use `ByteBuf#writeShort` or `ByteBuf#writeMedium` instead of `ByteBuf#writeBytes` for the constants.
2. Use `ByteBuf#setShort` instead of chained call of the `ByteBuf#setByte` with constants.
3. Remove an unnecessary `throws` from `HttpHeadersEncoder#encoderHeader`.

Result:

A bit faster writes constants into buffers.
2017-07-10 14:37:41 +02:00
Norman Maurer
83db2b07b4 Also use realloc when shrink the buffer.
Motivation:

We should also use realloc when shrink the buffer to eliminate extra allocations / memory copies when possible.

Modifications:

Use realloc for expanding and shrinking when possible.

Result:

Less memory copies and allocations
2017-07-06 20:03:15 +02:00
Norman Maurer
2a376eeb1b [maven-release-plugin] prepare for next development iteration 2017-07-06 13:24:06 +02:00
Norman Maurer
c7f8168324 [maven-release-plugin] prepare release netty-4.1.13.Final 2017-07-06 13:23:51 +02:00
Nikolay Fedorovskikh
f35047765f Avoid a double check ByteBuf#ensureWritable in ByteBufUtil
Motivation:

Methods `ByteBufUtil#writeUtf8` and `ByteBufUtil#writeAscii` contains a check `ByteBuf#ensureWritable` before the calling `ByteBuf#writeBytes`. But the `ByteBuf#writeBytes` also do a such check inside.

Modifications:

Make checks more targeted.

Result:

Less redundant method calls.
2017-06-28 19:00:01 +02:00
Nikolay Fedorovskikh
ba3616da3e Apply appropriate methods for writing CharSequence into ByteBuf
Motivation:

1. `ByteBuf` contains methods to writing `CharSequence` which optimized for UTF-8 and ASCII encodings. We can also apply optimization for ISO-8859-1.
2. In many places appropriate methods are not used.

Modifications:

1. Apply optimization for ISO-8859-1 encoding in the `ByteBuf#setCharSequence` realizations.
2. Apply appropriate methods for writing `CharSequences` into buffers.

Result:

Reduce overhead from string-to-bytes conversion.
2017-06-27 07:58:39 +02:00
Nikolay Fedorovskikh
01eb428b39 Move methods for decode hex dump into StringUtil
Motivation:

PR #6811 introduced a public utility methods to decode hex dump and its parts, but they are not visible from netty-common.

Modifications:

1. Move the `decodeHexByte`, `decodeHexDump` and `decodeHexNibble` methods into `StringUtils`.
2. Apply these methods where applicable.
3. Remove similar methods from other locations (e.g. `HpackHex` test class).

Result:

Less code duplication.
2017-06-23 18:52:42 +02:00
Norman Maurer
fd67a2354d [maven-release-plugin] prepare for next development iteration 2017-06-08 21:06:24 +02:00
Norman Maurer
3acd5c68ea [maven-release-plugin] prepare release netty-4.1.12.Final 2017-06-08 21:06:01 +02:00
Norman Maurer
7922757575 Allow to access memoryAddress of wrapped ByteBuf for ReadOnlyByteBuf
Motivation:

We should allow to access the memoryAddress of the wrapped ByteBuf when using ReadOnlyByteBuf for peformance reasons. If a user act on a memoryAddress its his responsible anyway to do nothing "stupid".

Modifications:

Delegate to wrapped ByteBuf.

Result:

Less performance overhead for various operations and also when writing to a native transport (which needs the memoryAddress).
2017-06-07 18:45:26 +02:00
Renjie Sun
629b83e0a5 Move QueryStringDecoder.decodeHexByte into ByteBufUtil
Motivations:
1. There are duplicated implementations of decoding hex strings. #6797
2. ByteBufUtil.HexUtil.decodeHexDump does not handle substring start
index properly and does not decode hex byte rigorously.

Modifications:
1. Function decodeHexByte is moved from QueryStringDecoder into ByteBufUtil.
2. ByteBufUtil.HexUtil.decodeHexDump is changed to use decodeHexByte.
3. Tests are Updated accordingly.

Result:
Fixed #6797 and made hex decoding functions more robust.
2017-06-07 09:27:36 -07:00
Scott Mitchell
b71abcedd1 ByteBufUtil#decodeHexDump
Motivation:
ByteBufUtil provides a hexDump method. For debugging purposes it is often useful to decode that hex dump to get the original content, but no such method exists.

Modifications:
- Add ByteBufUtil#decodeHexDump

Result:
ByteBufUtil#decodeHexDump is available to make debugging easier.
2017-05-30 15:20:54 -07:00
Norman Maurer
0db2901f4d [maven-release-plugin] prepare for next development iteration 2017-05-11 16:00:55 +02:00
Norman Maurer
f7a19d330c [maven-release-plugin] prepare release netty-4.1.11.Final 2017-05-11 16:00:16 +02:00
Scott Mitchell
63f5cdb0d5 ByteBuf#ensureWritable(int, boolean) should not throw
Motivation:
The javadocs for ByteBuf#ensureWritable(int, boolean) indicate that it should not throw, and instead the return code should indicate the result of the operation. Due to a bug in AbstractByteBuf it is possible for a resize to be attempted on a buffer that may exceed maxCapacity() and therefore throw.

Modifications:
- If there is not enough space in the buffer, and force is false, then a resize should not be attempted

Result:
AbstractByteBuf#ensureWritable(int, boolean) enforces the javadoc constraints and does not throw.
2017-05-09 00:12:25 -07:00
Norman Maurer
6915ec3bb9 [maven-release-plugin] prepare for next development iteration 2017-04-29 14:10:00 +02:00
Norman Maurer
f30f242fee [maven-release-plugin] prepare release netty-4.1.10.Final 2017-04-29 14:09:32 +02:00
Norman Maurer
b662afeece Correctly release all buffers in UnpooledTest
Motivation:

We not correctly released all buffers in the UnpooledTest and so showed "bad" way of handling buffers to people that inspect our code to understand when a buffer needs to be released.

Modifications:

Explicit release all buffers.

Result:

Cleaner and more correct code.
2017-04-27 19:29:45 +02:00
Jason Tedor
98beb777f8 Enable configuring available processors
Motivation:

In cases when an application is running in a container or is otherwise
constrained to the number of processors that it is using, the JVM
invocation Runtime#availableProcessors will not return the constrained
value but rather the number of processors available to the virtual
machine. Netty uses this number in sizing various resources.
Additionally, some applications will constrain the number of threads
that they are using independenly of the number of processors available
on the system. Thus, applications should have a way to globally
configure the number of processors.

Modifications:

Rather than invoking Runtime#availableProcessors, Netty should rely on a
method that enables configuration when the JVM is started or by the
application. This commit exposes a new class NettyRuntime for enabling
such configuraiton. This value can only be set once. Its default value
is Runtime#availableProcessors so that there is no visible change to
existing applications, but enables configuring either a system property
or configuring during application startup (e.g., based on settings used
to configure the application).

Additionally, we introduce the usage of forbidden-apis to prevent future
uses of Runtime#availableProcessors from creeping. Future work should
enable the bundled signatures and clean up uses of deprecated and
other forbidden methods.

Result:

Netty can be configured to not use the underlying number of processors,
but rather the constrained number of processors.
2017-04-23 10:31:17 +02:00
Norman Maurer
bf0beb772c Fix IllegalArgumentException when release a wrapped ByteBuffer on Java9
Motivation:

Unsafe.invokeCleaner(...) checks if the passed in ByteBuffer is a slice or duplicate and if so throws an IllegalArgumentException on Java9. We need to ensure we never try to free a ByteBuffer that was provided by the user directly as we not know if its a slice / duplicate or not.

Modifications:

Never try to free a ByteBuffer that was passed into UnpooledUnsafeDirectByteBuf constructor by an user (via Unpooled.wrappedBuffer(....)).

Result:

Build passes again on Java9
2017-04-20 19:19:11 +02:00
Nikolay Fedorovskikh
0692bf1b6a fix the typos 2017-04-20 04:56:09 +02:00
Norman Maurer
e482d933f7 Add 'io.netty.tryAllocateUninitializedArray' system property which allows to allocate byte[] without memset in Java9+
Motivation:

Java9 added a new method to Unsafe which allows to allocate a byte[] without memset it. This can have a massive impact in allocation times when the byte[] is big. This change allows to enable this when using Java9 with the io.netty.tryAllocateUninitializedArray property when running Java9+. Please note that you will need to open up the jdk.internal.misc package via '--add-opens java.base/jdk.internal.misc=ALL-UNNAMED' as well.

Modifications:

Allow to allocate byte[] without memset on Java9+

Result:

Better performance when allocate big heap buffers and using java9.
2017-04-19 11:45:39 +02:00
Scott Mitchell
21562d8808 Retained[Duplicate|Slice] operations should not increase the reference count for UnreleasableByteBuf
Motivation:
UnreleasableByteBuf operations are designed to not modify the reference count of the underlying buffer. The Retained[Duplicate|Slice] operations violate this assumption and can cause the underlying buffer's reference count to be increased, but never allow for it to be decreased. This may lead to memory leaks.

Modifications:
- UnreleasableByteBuf's Retained[Duplicate|Slice] should leave the reference count of the parent buffer unchanged after the operation completes.

Result:
No more memory leaks due to usage of the Retained[Duplicate|Slice] on an UnreleasableByteBuf object.
2017-03-31 17:45:29 -07:00
Scott Mitchell
ef21d5f4ca UnsafeByteBufUtil errors and simplification
Motiviation:
UnsafeByteBufUtil has some bugs related to using an incorrect index, and also omitting the array paramter when dealing with byte[] objects. There is also some simplification possible with respect to type casting, and minor formatting consistentcy issues.

Modifications:
- Ensure indexing is correct when dealing with native memory
- Fix the native access and endianness for the medium/unsigned medium methods
- Ensure array is used when dealing with heap memory
- Remove unecessary casts when using long
- Fix formating and alignment

Result:
UnsafeByteBufUtil is more correct and won't access direct memory when heap arrays are used.
2017-03-30 11:52:03 -07:00
Norman Maurer
6036b3f6ea Fix buffer leak in EmptyByteBufTest introduced by aa2f16f314 2017-03-27 05:20:02 +02:00
Bryce Anderson
aa2f16f314 EmptyByteBuf allows writing ByteBufs with 0 readable bytes
Motivation:

The contract of `ByteBuf.writeBytes(ByteBuf src)` is such that it will
throw an `IndexOutOfBoundsException if `src.readableBytes()` is greater than
`this.writableBytes()`. The EmptyByteBuf class will throw the exception,
even if the source buffer has zero readable bytes, in violation of the
contract.

Modifications:

Use the helper method `checkLength(..)` to check the length and throw
the exception, if appropriate.

Result:

Conformance with the stated behavior of ByteBuf.
2017-03-21 22:00:54 -07:00
Norman Maurer
2b8c8e0805 [maven-release-plugin] prepare for next development iteration 2017-03-10 07:46:17 +01:00
Norman Maurer
1db58ea980 [maven-release-plugin] prepare release netty-4.1.9.Final 2017-03-10 07:45:28 +01:00
Nikolay Fedorovskikh
2993760e92 Fix misordered 'assertEquals' arguments in tests
Motivation:

Wrong argument order in some 'assertEquals' applying.

Modifications:

Flip compared arguments.

Result:

Correct `assertEquals` usage.
2017-03-08 22:48:37 -08:00
Norman Maurer
3ad3356892 Expose ByteBufAllocator metric in a more general way
Motivation:

PR [#6460] added a way to access the used memory of an allocator. The used naming was not very good and how things were exposed are not consistent.

Modifications:

- Add a new ByteBufAllocatorMetric and ByteBufAllocatorMetricProvider interface
- Let the ByteBufAllocator implementations implement ByteBufAllocatorMetricProvider
- Move exposed stats / metric from PooledByteBufAllocator to PooledByteBufAllocatorMetric and mark old methods as `@Deprecated`.

Result:

More consistent way to expose metric / stats for ByteBufAllocator
2017-03-08 20:07:58 +01:00
Scott Mitchell
2cff918044 Correct usages of internalNioBuffer
Motivation:
There are numerous usages of internalNioBuffer which hard code 0 for the index when the intention was to use the readerIndex().

Modifications:
- Remove hard coded 0 for the index and use readerIndex()

Result:
We are less susceptible to using the wrong index, and don't make assumptions about the ByteBufAllocator.
2017-03-02 12:51:22 -08:00
Norman Maurer
461f9a1212 Allow to obtain informations of used direct and heap memory for ByteBufAllocator implementations
Motivation:

Often its useful for the user to be able to get some stats about the memory allocated via an allocator.

Modifications:

- Allow to obtain the used heap and direct memory for an allocator
- Add test case

Result:

Fixes [#6341]
2017-03-01 18:53:43 +01:00
Norman Maurer
a7fe6c0153 Metrics exposed by PooledByteBufAllocator needs to be correctly synchronized
Motivation:

As we may access the metrics exposed of PooledByteBufAllocator from another thread then the allocations happen we need to ensure we synchronize on the PoolArena to ensure correct visibility.

Modifications:

Synchronize on the PoolArena to ensure correct visibility.

Result:

Fix multi-thread issues on the metrics
2017-03-01 06:26:08 +01:00
Norman Maurer
deb90923a2 Ensure PooledByteBuf.initUnpooled(...) correctly set the allocator
Motivation:

Commit 8dda984afe introduced a regression which lead to the situation that the allocator is not set when PooledByteBuf.initUnpooled(...) is called. Thus it was possible that PooledByteBuf.alloc() returns null or the wrong allocator if multiple PooledByteBufAllocator are used in an application.

Modifications:

- Correctly set the allocator
- Add test-case

Result:

Fixes [#6436].
2017-02-23 19:53:17 +01:00
Nikolay Fedorovskikh
0623c6c533 Fix javadoc issues
Motivation:

Invalid javadoc in project

Modifications:

Fix it

Result:

More correct javadoc
2017-02-22 07:31:07 +01:00
Norman Maurer
fbf0e5f4dd Prefer JDK ThreadLocalRandom implementation over ours.
Motivation:

We have our own ThreadLocalRandom implementation to support older JDKs . That said we should prefer the JDK provided when running on JDK >= 7

Modification:

Using ThreadLocalRandom implementation of the JDK when possible.

Result:

Make use of JDK implementations when possible.
2017-02-16 15:44:00 -08:00
Norman Maurer
6ac5f35077 Use Unsafe to read ByteBuffer.address field to make it work on Java9 as well.
Motivation:

Java9 does not allow changing access level via reflection by default. This lead to the situation that netty disabled Unsafe completely as ByteBuffer.address could not be read.

Modification:

Use Unsafe to read the address field as this works on all Java versions.

Result:

Again be able to use Unsafe optimisations when using Netty with Java9
2017-02-16 20:40:59 +01:00
Norman Maurer
8a3a3245df Ensure Unsafe buffer implementations are used when sun.misc.Unsafe is present
Motivation:

When sun.misc.Unsafe is present we want to use *Unsafe*ByteBuf implementations. We missed to do so in PooledByteBufAllocator when the heapArena is null.

Modifications:

- Correctly use UnpooledUnsafeHeapByteBuf
- Add unit tests

Result:

Use most optimal ByteBuf implementation.
2017-02-16 07:48:33 +01:00
Norman Maurer
f09a721d7f Expose the chunkSize used by PooledByteBufAllocator.
Motivation:

Sometimes it may be useful to know the used chunkSize.

Modifications:

Add method to expose chunkSize.

Result:

More exposed details.
2017-02-14 08:37:05 +01:00
Norman Maurer
371c0ca0f8 Eliminate unnessary wrapping when call ByteBuf.asReadOnly() in some cases
Motivation:

We can eliminate unnessary wrapping when call ByteBuf.asReadOnly() in some cases to reduce indirection.

Modifications:

- Check if asReadOnly() needs to create a new instance or not
- Add test cases

Result:

Less object creation / wrapping.
2017-02-14 08:35:16 +01:00
fenik17
0cf3f54a8d Adding 'final' keyword for private fields where possible
Motivation

Missing 'final' keyword for fields

Modifications

Add 'final' for fields where possible

Result

More safe and consistent code
2017-02-14 08:29:15 +01:00
Norman Maurer
34ea09e552 Add missing assumeTrue(...) that were not added in 54339c08ac 2017-02-14 08:17:33 +01:00
Norman Maurer
9b2b3e2512 Ensure tests pass when sun.misc.Unsafe is not present
Motivation:

We need to ensure we pass all tests when sun.misc.Unsafe is not present.

Modifications:

- Make *ByteBufAllocatorTest work whenever sun.misc.Unsafe is present or not
- Let Lz4FrameEncoderTest not depend on AbstractByteBufAllocator implementation details which take into account if sun.misc.Unsafe is present or not

Result:

Tests pass even without sun.misc.Unsafe.
2017-02-14 07:52:07 +01:00
Norman Maurer
54339c08ac Only try to calculate direct memory offset when sun.misc.Unsafe is present
Motivation:

We should only try to calculate the direct memory offset when sun.misc.Unsafe is present as otherwise it will fail with an NPE as PlatformDependent.directBufferAddress(...) will throw it.
This problem was introduced by 66b9be3a46.

Modifications:

Use offset of 0 if no sun.misc.Unsafe is present.

Result:

PooledByteBufAllocator also works again when no sun.misc.Unsafe is present.
2017-02-14 07:49:24 +01:00
Norman Maurer
d8596d2d90 Two tests are missing @Test annotations
Motivation:

ReadOnlyByteBufTest contains two tests which are missing the `@Test` annotation and so will never run.

Modifications:

Add missing annotation.

Result:

Tests run as expected.
2017-02-14 07:48:37 +01:00
Norman Maurer
a7c0ff665c Only use Mockito for mocking.
Motivation:

We used various mocking frameworks. We should only use one...

Modifications:

Make usage of mocking framework consistent by only using Mockito.

Result:

Less dependencies and more consistent mocking usage.
2017-02-07 08:47:22 +01:00
Kiril Menshikov
66b9be3a46 Allow to allign allocated Buffers
Motivation:

64-byte alignment is recommended by the Intel performance guide (https://software.intel.com/en-us/articles/practical-intel-avx-optimization-on-2nd-generation-intel-core-processors) for data-structures over 64 bytes.
Requiring padding to a multiple of 64 bytes allows for using SIMD instructions consistently in loops without additional conditional checks. This should allow for simpler and more efficient code.

Modification:

At the moment cache alignment must be setup manually. But probably it might be taken from the system. The original code was introduced by @normanmaurer https://github.com/netty/netty/pull/4726/files

Result:

Buffer alignment works better than miss-align cache.
2017-02-06 07:58:29 +01:00
Norman Maurer
756b78b7df Add common tests for ByteBufAllocator / AbstractByteBufAllocator implementations.
Motivation:

We not had tests for ByteBufAllocator implementations in general.

Modifications:

Added ByteBufAllocatorTest, AbstractByteBufAllocatorTest and UnpooledByteBufAllocatorTest

Result:

More tests for allocator implementations.
2017-02-06 07:51:10 +01:00
Dmitriy Dumanskiy
b9abd3c9fc Cleanup : for loops for arrays to make code easier to read and removed unnecessary toLowerCase() 2017-02-06 07:47:59 +01:00
Norman Maurer
66b1731041 PooledByteBuf.capacity(...) not enforces maxCapacity()
Motivation:

PooledByteBuf.capacity(...) miss to enforce maxCapacity() and so its possible to increase the capacity of the buffer even if it will be bigger then maxCapacity().

Modifications:

- Correctly enforce maxCapacity()
- Add unit tests for capacity(...) calls.

Result:

Correctly enforce maxCapacity().
2017-02-01 18:45:54 +01:00
Carl Mastrangelo
ead9938980 Include Http 1 request in error message
Motivation:

When An HTTP server is listening in plaintext mode, it doesn't have
a chance to negotiate "h2" in the tls handshake.  HTTP 1 clients
that are not expecting an HTTP2 server will accidentally a request
that isn't an upgrade, which the HTTP/2 decoder will not
understand.  The decoder treats the bytes as hex and adds them to
the error message.

These error messages are hard to understand by humans, and result
in extra, manual work to decode.

Modification:

If the first bytes of the request are not the preface, the decoder
will now see if they are an HTTP/1 request first.  If so, the error
message will include the method and path of the original request in
the error message.

In case the path is long, the decoder will check up to the first
1024 bytes to see if it matches.  This could be a DoS vector if
tons of bad requests or other garbage come in.  A future optimization
would be to treat the first few bytes as an AsciiString and not do
any Charset decoding.  ByteBuf.toCharSequence alludes to such an
optimization.

The code has been left simple for the time being.

Result:

Faster identification of errant HTTP requests.
2017-01-30 09:46:38 -08:00
Norman Maurer
735d6dd636 [maven-release-plugin] prepare for next development iteration 2017-01-30 15:14:02 +01:00
Norman Maurer
76e22e63f3 [maven-release-plugin] prepare release netty-4.1.8.Final 2017-01-30 15:12:36 +01:00
ming.ma
f10f8a3131 Calculate correct count for tiny/small/normal allocation
Motivation:

Disable ThreadLocal Cache, then allocate Pooled ByteBuf and release all these buffers, PoolArena's tiny/small/normal allocation count is incorrect.

Modifications:

- Calculate PoolArena's tiny/small/normal allocation one time
- Add testAllocationCounter TestCase

Result:

Fixes #6282 .
2017-01-30 10:32:58 +01:00
Norman Maurer
8dda984afe Null out references to tmpNioBuf and chunk to allow quicker collecting
Motivation:

In PooledByteBuf we missed to null out the chunk and tmpNioBuf fields before recycle it to the Recycler. This could lead to keep objects longer alive then necessary which may hold a lot of memory.

Modifications:

Null out tmpNioBuf and chunk before recycle.

Result:

Possible to earlier GC objects.
2017-01-26 22:06:47 +01:00
ming.ma
44add3c525 Log correct value for useCacheForAllThreads
Motivation:

Log about "-Dio.netty.allocator.useCacheForAllThreads" is missing log placeholder, and so can't output correct value.

Modification:

- Add placeholder

Result:

Fixes #6265 .
2017-01-25 08:01:23 +01:00
Norman Maurer
7f01da8d0f [maven-release-plugin] prepare for next development iteration 2017-01-12 11:36:51 +01:00
Norman Maurer
7a21eb1178 [maven-release-plugin] prepare release netty-4.1.7.Final 2017-01-12 11:35:58 +01:00
Scott Mitchell
583a59abb1 ByteBufUtil.compare int underflow
Motivation:
ByteBufUtil.compare uses long arithmetic but doesn't check for underflow on when converting from long to int to satisfy the Comparable interface. This will result in incorrect comparisons and violate the Comparable interface contract.

Modifications:
- ByteBufUtil.compare should protect against int underflow

Result:
Fixes https://github.com/netty/netty/issues/6169
2017-01-10 11:43:59 -08:00
Norman Maurer
89e93968ac Remove usage of own Atomic*FieldUpdater in favor of JDKs
Motivation:

In later Java8 versions our Atomic*FieldUpdater are slower then the JDK implementations so we should not use ours anymore. Even worse the JDK implementations provide for example an optimized version of addAndGet(...) using intrinsics which makes it a lot faster for this use-case.

Modifications:

- Remove methods that return our own Atomic*FieldUpdaters.
- Use the JDK implementations everywhere.

Result:

Faster code.
2016-12-15 08:09:06 +00:00
Norman Maurer
712c16ad83 Ensure leak aware buffers correctly close the ResourceLeakTracker
Motivation:

We should assert that the leak aware buffers correctly close the ResourceLeakTracker in the unit tests.

Modifications:

- Keep track of NoopResourceLeakTrackers and check if these were closed once the test completes
- Fix bugs in tests so the buffers are all released.

Result:

Better tests for leak aware buffers
2016-12-08 19:33:20 +01:00
Norman Maurer
24b39bc287 Only schedule a ThreadDeathWatcher task if caches are used.
Motivation:

If caches are disabled it does not make sense to schedule a task that will free up memory consumed by the caches.

Modifications:

Do not schedule if caches are disabled.

Result:

Less overhead.
2016-12-08 10:36:29 +01:00
Norman Maurer
13a8ebade4 Correctly handle the case when no ResourceLeakTracker was created for derived pooled buffers. This was missed in c2f4daa739 2016-12-04 23:09:23 +01:00
Norman Maurer
c2f4daa739 Fix false-positives when using ResourceLeakDetector.
Motivation:

We need to ensure the tracked object can not be GC'ed before ResourceLeak.close() is called as otherwise we may get false-positives reported by the ResourceLeakDetector. This can happen as the JIT / GC may be able to figure out that we do not need the tracked object anymore and so already enqueue it for collection before we actually get a chance to close the enclosing ResourceLeak.

Modifications:

- Add ResourceLeakTracker and deprecate the old ResourceLeak
- Fix some javadocs to correctly release buffers.
- Add a unit test for ResourceLeakDetector that shows that ResourceLeakTracker has not the problems.

Result:

No more false-positives reported by ResourceLeakDetector when ResourceLeakDetector.track(...) is used.
2016-12-04 09:01:39 +01:00
Norman Maurer
243b2b9f19 PooledByteBufAllocatorTest may has memory visiblity issues as it uses non concurrent queue
Motivation:

PooledByteBufAllocatorTest uses an ArrayQueue but access it from multiple threads (not concurrently but still from different threads). This may leak to memory visibility issues.

Modifications:

- Use a concurrent queue
- Some cleanup

Result:

Non racy test code.
2016-12-02 07:42:19 +01:00
Norman Maurer
2b8fd8d43b Allow to disable caching in PooledByteBufAllocator for non FastThreadLocalThreads
Motivation:

If a user allocates a lot from outside the EventLoop we may end up creating a lot of caches in the PooledByteBufAllocator. This may be wasteful and so it may be useful for an other to configure that caches should only be used from within EventLoops.

Modifications:

Add new constructor which allows to configure the caching behaviour.

Result:

More flexible configuration of PooledByteBufAllocator possible
2016-12-02 07:40:33 +01:00
Norman Maurer
5bc447c539 Allow to build netty when sun.misc.Unsafe is not avaible or -Dio.netty.noUnsafe=true is used.
Motivation:

We support using Netty without sun.misc.Unsafe, so we should also support building it without it. This way we can also run all tests without sun.misc.Unsafe and so see if it works as expected.

Modifications:

Correctly skip tests that depend on sun.misc.Unsafe if its not present or -Dio.netty.noUnsafe=true is used.

Result:

Be able to build netty without sun.misc.Unsafe
2016-12-01 21:24:49 +01:00
Norman Maurer
feae0435b5 SwappedByteBuf.unwrap() should return wrapped buffer.
Motivation:

SwappedByteBuf.unwrap() not returned the wrapped buffer but the buffer that was wrapped by the original buffer. This is not correct.

Modifications:

Correctly return wrapped buffer and fix test.

Result:

SwappedByteBuf.unwrap() works as expected.
2016-12-01 21:22:30 +01:00
Norman Maurer
f70757da2a [#6015] Fix racy PooledByteBufAllocatorTests
Motivation:

We had a few tests PooledByteBufAllocatorTests which used parkNanos(...) to give a resource enough time to get destroyed. This is race and may not be good enough.

Modifications:

Ensure the ThreadCache is really destroyed.

Result:

No more racy tests that depend on ThreadCaches.
2016-12-01 10:16:12 +01:00
Stephane Landelle
ba95c401a7 Misc clean up
Motivation:
IntelliJ issues several warnings.

Modifications:

* `ClientCookieDecoder` and `ServerCookieDecoder`:
  * `nameEnd`, `valueBegin` and `valueEnd` don't need to be initialized
  * `keyValLoop` loop doesn't been to be labelled, as it's the most inner one (same thing for labelled breaks)
  * Remove `if (i != headerLen)` as condition is always true
* `ClientCookieEncoder` javadoc still mention old logic
* `DefaultCookie`, `ServerCookieEncoder` and `DefaultHttpHeaders` use ternary ops that can be turned into simple boolean ones
* `DefaultHeaders` uses a for(int) loop over an array. It can be turned into a foreach one as javac doesn't allocate an iterator to iterate over arrays
* `DefaultHttp2Headers` and `AbstractByteBuf` `equal` can be turned into a single boolean statement
Result:

Cleaner code
2016-11-22 15:17:05 -08:00
Scott Mitchell
930633350d Consistency between pooled/unpooled derived buffers
Motivation:
4bba7526e2 introduced changes which made pooled and unpooled derived buffers inconsistent in a few ways:
- Pooled derived buffers always generated a duplicate buffer when duplicate() was called and always generated a sliced buffer when slice() was called. Unpooled derived buffers some times generated a sliced buffer when duplicate() was called.
- The indexes that were set for duplicate buffers generated from slices were not always consistent.
There were also some various bugs in the derived pooled buffer implementation.

Modifications:
- Make pooled/unpooled consistently generate duplicate buffers when duplicate() is called and sliced buffers when slice() is called.
- Fix bugs in the derived pooled buffer

Result:
More consistent behavior from the derived pooled/unpooled buffers.
2016-11-21 11:38:10 -08:00
Norman Maurer
c2565d8dd2 Remove usage of releaseLater(...) that was missed in 0bc30a123e 2016-11-18 14:47:42 +00:00
Norman Maurer
0bc30a123e Eliminate usage of releaseLater(...) to reduce memory usage during tests
Motiviation:

We used ReferenceCountUtil.releaseLater(...) in our tests which simplifies a bit the releasing of ReferenceCounted objects. The problem with this is that while it simplifies stuff it increase memory usage a lot as memory may not be freed up in a timely manner.

Modifications:

- Deprecate releaseLater(...)
- Remove usage of releaseLater(...) in tests.

Result:

Less memory needed to build netty while running the tests.
2016-11-18 09:34:11 +01:00
Scott Mitchell
4bba7526e2 retained[Slice|Duplicate] buffer reference count bug
Motivation:
Currently the ByteBuf created as a result of retained[Slice|Duplicate] maintains its own reference count, and when this reference count is depleated it will release the ByteBuf returned from unwrap(). The unwrap() buffer is designed to be the 'root parent' and will skip all intermediate layers of buffers. If the intermediate layers of buffers contain a retained[Slice|Duplicate] then these reference counts will be ignored during deallocation. This may lead to deallocating the 'root parent' before all derived pooled buffers are actually released. This same issue holds if a retained[Slice|Duplicate] is in the heirachy and a 'regular' slice() or duplicate() buffer is created.

Modifications:
- AbstractPooledDerivedByteBuf must maintain a reference to the direct parent (the buffer which retained[Slice|Duplicate] was called on) and release on this buffer instead of the 'root parent' returned by unwrap()
- slice() and duplicate() buffers created from AbstractPooledDerivedByteBuf must also delegate reference count operations to their immediate parent (or first ancestor which maintains an independent reference count).

Result:
Fixes https://github.com/netty/netty/issues/5999
2016-11-17 09:35:39 -08:00
Scott Mitchell
c1932a8537 ByteBuf Input Stream Reference Count Ownership
Motivation:
Netty provides a adaptor from ByteBuf to Java's InputStream interface. The JDK Stream interfaces have an explicit lifetime because they implement the Closable interface. This lifetime may be differnt than the ByteBuf which is wrapped, and controlled by the interface which accepts the JDK Stream. However Netty's ByteBufInputStream currently does not take reference count ownership of the underlying ByteBuf. There may be no way for existing classes which only accept the InputStream interface to communicate when they are done with the stream, other than calling close(). This means that when the stream is closed it may be appropriate to release the underlying ByteBuf, as the ownership of the underlying ByteBuf resource may be transferred to the Java Stream.

Motivation:
- ByteBufInputStream.close() supports taking reference count ownership of the underyling ByteBuf

Result:
ByteBufInputStream can assume reference count ownership so the underlying ByteBuf can be cleaned up when the stream is closed.
2016-11-14 16:29:55 -08:00
Norman Maurer
5f533b7358 [maven-release-plugin] prepare for next development iteration 2016-10-14 13:20:41 +02:00
Norman Maurer
35fb0babe2 [maven-release-plugin] prepare release netty-4.1.6.Final 2016-10-14 12:47:19 +02:00
Norman Maurer
97bf3c0a9b Correctly throw IndexOutOfBoundsException when dst.remaining() is too big.
Motivation:

In some ByteBuf implementations we not correctly implement getBytes(index, ByteBuffer).

Modifications:

Correct code to do what is defined in the javadocs and adding test.

Result:

Implementation works as described.
2016-10-12 14:41:56 +02:00
radai-rosenblatt
15ac6c4a1f Clean-up unused imports
Motivation:

the build doesnt seem to enforce this, so they piled up

Modifications:

removed unused import lines

Result:

less unused imports

Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
2016-09-30 09:08:50 +02:00
Norman Maurer
5986c229c4 [#5833] Ensure direct memory is released when DirectPoolArena is collected
Motivation:

We need to ensure we release all direct memory once the DirectPoolArena is collected. Otherwise we may never reclaim the memory and so leak memory.

Modifications:

Ensure we destroy all PoolChunk memory when DirectPoolArena is collected.

Result:

Free up unreleased memory when DirectPoolArena is collected.
2016-09-23 15:20:59 -07:00
Norman Maurer
3103f0551c Share code between retain(...) and release(...) implementations.
Motivation:

We can share the code in retain() and retain(...) and also in release() and release(...).

Modifications:

Share code.

Result:

Less duplicated code.
2016-09-02 21:53:10 +02:00
Norman Maurer
54b1a100f4 [maven-release-plugin] prepare for next development iteration 2016-08-26 10:06:32 +02:00
Norman Maurer
463b5cf21b [#5773] AbstractByteBuf.forEachByteDesc(ByteProcessor) starts from wrong index
Motivation:

We introduced a regression in 1abdbe6f67 which let the iteration start from the wrong index.

Modifications:

Fix start index and add tests.

Result:

Fix regression.
2016-09-01 08:21:12 +02:00
Norman Maurer
1208b90f57 [maven-release-plugin] prepare release netty-4.1.5.Final 2016-08-26 04:59:35 +02:00
Norman Maurer
a01519e4f8 [#5718] Result of ByteBufUtil.compare(ByteBuf a, ByteBuf b) is dependent on ByteOrder of supplied ByteBufs
Motivation:

Result of ByteBufUtil.compare(ByteBuf a, ByteBuf b) is dependent on ByteOrder of supplied ByteBufs which should not be the case (as stated in the javadocs).

Modifications:

Ensure we get a consistent behavior when calling ByteBufUtil.compare(ByteBuf a, ByteBuf b) and not depend on ByteOrder.

Result:

ByteBufUtil.compare(ByteBuf a, ByteBuf b) and so AbstractByteBuf.compare(...) works correctly as stated in the javadocs.
2016-08-26 15:36:06 +02:00
Norman Maurer
e7449b1ef3 [#5645] Allow to create ByteBuf from existing memory address.
Motivation:

Sometimes it is useful to be able to wrap an existing memory address (a.k.a pointer) and create a ByteBuf from it. This way its easier to interopt with other libraries.

Modifications:

Add a new Unpooled.wrappedBuffer(....) method that takes a memory address.

Result:

Be able to wrap an existing memory address into a ByteBuf.
2016-08-16 14:16:15 +02:00
Scott Mitchell
1abdbe6f67 AbstractByteBuf forEach minimize byte code
Motivation:
The default limit for the maximum amount of bytes that a method will be inlined is 35 bytes. AbstractByteBuf#forEach and AbstractByteBuf#forEachDesc comprise of method calls which are more than this maximum default threshold and may prevent or delay inlining for occuring. The byte code for these methods can be reduced to allow for easier inlining. Here are the current byte code sizes:

AbstractByteBuf::forEachByte (24 bytes)
AbstractByteBuf::forEachByte(int,int,..) (14 bytes)
AbstractByteBuf::forEachByteAsc0 (71 bytes)
AbstractByteBuf::forEachByteDesc (24 bytes)
AbstractByteBuf::forEachByteDesc(int,int,.) (24 bytes)
AbstractByteBuf::forEachByteDesc0 (69 bytes)

Modifications:
- Reduce the code for each method in the AbstractByteBuf#forEach and AbstractByteBuf#forEachDesc call stack

Result:
AbstractByteBuf::forEachByte (25 bytes)
AbstractByteBuf::forEachByte(int,int,..) (25 bytes)
AbstractByteBuf::forEachByteAsc0 (29 bytes)
AbstractByteBuf::forEachByteDesc (25 bytes)
AbstractByteBuf::forEachByteDesc(int,int,..) (27 bytes)
AbstractByteBuf::forEachByteDesc0 (29 bytes)
2016-08-10 13:02:16 -07:00
Norman Maurer
65dea8aeec Fix Assume.assumeTrue(...) checks in *UnssafeNoCleanerDirectByteBufTest
Motivation:

We used incorrect assumeTrue(...) checks.

Modifications:

Fix check.

Result:

Be able to run tests also if java.nio.DirectByteBuffer.<init>(long, int) could not be accessed.
2016-08-10 11:11:58 +02:00
Norman Maurer
d44017189e Remove extra conditional check in retain
Motivation:

We not need to do an extra conditional check in retain(...) as we can just check for overflow after we did the increment.

Modifications:

- Remove extra conditional check
- Add test code.

Result:

One conditional check less.
2016-08-05 13:09:26 +02:00
Norman Maurer
3fa8f31055 Reduce conditionals in AbstractReferenceCountedByteBuf
Motivation:
AbstractReferenceCountedByteBuf as independent conditional statements to check the bounds of the retain IllegalReferenceCountException condition. One of the exceptions also uses the incorrect increment. The same fix was done for AbstractReferenceCounted as 01523e7835.

Modifications:
- Combined independent conditional checks into 1 where possible
- Correct IllegalReferenceCountException with incorrect increment
- Remove the subtract to check for overflow and re-use the addition and check for overflow to remove 1 arithmetic operation (see http://docs.oracle.com/javase/specs/jls/se7/html/jls-15.html#jls-15.18.2)

Result:
AbstractReferenceCountedByteBuf has less independent branch statements and more correct IllegalReferenceCountException. Compilation size of AbstractReferenceCountedByteBuf.retain() is reduced.
2016-08-05 07:25:47 +02:00
Norman Maurer
76a3ea699d [#5629] Ensure direct ByteBuffer are wrapped in as direct ByteBuf.
Motivation:

We need to check if a ByteBuffer is direct via isDirect() to detect if its direct as hasArray() may also return true for a direct ByteBuffer.

See also:
https://docs.oracle.com/javase/8/docs/api/java/nio/ByteBuffer.html#allocateDirect-int-

Modifications:

Add isDirect() check.

Result:

Correct wrap a direct ByteBuffer in all cases.
2016-08-05 07:16:46 +02:00
Dmitriy Dumanskiy
f769bb3376 Cleanup : removed unused empty arrays and simplified initialization 2016-08-02 07:03:59 +02:00
Scott Mitchell
82b22d6f11 findNextPositivePowerOfTwo out of bounds
Motivation:
Some usages of findNextPositivePowerOfTwo assume that bounds checking is taken care of by this method. However bounds checking is not taken care of by findNextPositivePowerOfTwo and instead assert statements are used to imply the caller has checked the bounds. This can lead to unexpected non power of 2 return values if the caller is not careful and thus invalidate any logic which depends upon a power of 2.

Modifications:
- Add a safeFindNextPositivePowerOfTwo method which will do runtime bounds checks and always return a power of 2

Result:
Fixes https://github.com/netty/netty/issues/5601
2016-08-01 19:52:13 -07:00
Norman Maurer
e85d437398 [#5597] Not try to double release empty buffer in Unpooled.wrappedBuffer(...)
Motivation:

When Unpooled.wrappedBuffer(...) is called with an array of ByteBuf with length >= 2 and the first ByteBuf is not readable it will result in double releasing of these empty buffers when release() is called on the returned buffer.

Modifications:

- Ensure we only wrap readable buffers.
- Add unit test

Result:

No double release of buffers.
2016-07-30 21:16:44 +02:00
Scott Mitchell
82b617dfe9 retainSlice() unwrap ByteBuf
Motivation:
retainSlice() currently does not unwrap the ByteBuf when creating the ByteBuf wrapper. This effectivley forms a linked list of ByteBuf when it is only necessary to maintain a reference to the unwrapped ByteBuf.

Modifications:
- retainSlice() and retainDuplicate() variants should only maintain a reference to the unwrapped ByteBuf
- create new unit tests which generally verify the retainSlice() behavior
- Remove unecessary generic arguments from AbstractPooledDerivedByteBuf
- Remove unecessary int length member variable from the unpooled sliced ByteBuf implementation
- Rename the unpooled sliced/derived ByteBuf to include Unpooled in their name to be more consistent with the Pooled variants

Result:
Fixes https://github.com/netty/netty/issues/5582
2016-07-29 11:16:44 -07:00
Norman Maurer
d92c5f5f5b Introduce allocation / pooling ratio in Recycler
Motivation:

At the moment the Recyler is very sensitive to allocation bursts which means that if there is a need for X objects for only one time these will most likely end up in the Recycler and sit there forever as the normal workload only need a subset of this number.

Modifications:

Add a ratio which sets how many objects should be pooled for each new allocation. This allows to slowly increase the number of objects in the Recycler while not be to sensitive for bursts.

Result:

Less unused objects in the Recycler if allocation rate sometimes bursts.
2016-07-29 15:20:39 +02:00
Norman Maurer
cb7cf4491c [maven-release-plugin] prepare for next development iteration 2016-07-27 13:29:56 +02:00
Norman Maurer
9466b32d05 [maven-release-plugin] prepare release netty-4.1.4.Final 2016-07-27 13:16:59 +02:00
Scott Mitchell
5f4f295600 Correctly return a retained slice if called SwappedByteBuf.retainedSlice(...)
Motivation:

SwappedByteBuf.retainedSlice(...) did not return a retained buffer.

Modifications:

Correctly delegate to retainedSlice(..) calls.

Result:

Correctly return retained slice.
2016-07-27 12:36:37 +02:00
Norman Maurer
047f6aed28 [maven-release-plugin] prepare for next development iteration 2016-07-15 09:09:13 +02:00
Norman Maurer
b2adea87a0 [maven-release-plugin] prepare release netty-4.1.3.Final 2016-07-15 09:08:53 +02:00
Norman Maurer
771cfaec22 [#5520] Correctly include all PoolSubpage metrics
Motivation:

Because of a bug we missed to include the first PoolSubpage when collection metrics.

Modifications:

- Correctly include all subpages
- Add unit test

Result:

Correctly include all subpages
2016-07-13 21:33:06 +02:00
Norman Maurer
4676a2271c [maven-release-plugin] prepare for next development iteration 2016-07-01 10:33:32 +02:00
Norman Maurer
ad270c02b9 [maven-release-plugin] prepare release netty-4.1.2.Final 2016-07-01 09:07:40 +02:00
Kevin Herron
ee3c8e0580 Test that CompositeByteBuf releases its components
Motivation:

In order to prevent a regression, add test case for a bug that caused a CompositeByteBuf to not release its components.

Modifications:

Add a test case that asserts a CompositeByteBuf's component buffers have indeed been released.

Result:

AbstractCompositeByteBuf gains a test case that will prevent future regressions.
2016-06-27 19:21:12 +02:00
agonigberg
3288cacf8d Pluggable resource leak detector
Allow users of Netty to plug in their own leak detector for the purpose
of instrumentation.

Motivation:

We are rolling out a large Netty deployment and want to be able to
track the amount of leaks we're seeing in production via custom
instrumentation. In order to achieve this today, I had to plug in a
custom `ByteBufAllocator` into the bootstrap and have it initialize a
custom `ResourceLeakDetector`. Due to these classes mostly being marked
`final` or having private or static methods, a lot of the code had to
be copy-pasted and it's quite ugly.

Modifications:

* I've added a static loader method for the `ResourceLeakDetector` in
`AbstractByteBuf` that tries to instantiate the class passed in via the
`-Dio.netty.customResourceLeakDetector`, otherwise falling back to the
default one.
* I've modified `ResourceLeakDetector` to be non-final and to have the
reporting broken out in to methods that can be overridden.

Result:

You can instrument leaks in your application by just adding something
like the following:

```java
public class InstrumentedResourceLeakDetector<T> extends
ResourceLeakDetector<T> {

    @Monitor("InstanceLeakCounter")
    private final AtomicInteger instancesLeakCounter;

    @Monitor("LeakCounter")
    private final AtomicInteger leakCounter;

    public InstrumentedResourceLeakDetector(Class<T> resource) {
        super(resource);
        this.instancesLeakCounter = new AtomicInteger();
        this.leakCounter = new AtomicInteger();
    }

    @Override
    protected void reportTracedLeak(String records) {
        super.reportTracedLeak(records);
        leakCounter.incrementAndGet();
    }

    @Override
    protected void reportUntracedLeak() {
        super.reportUntracedLeak();
        leakCounter.incrementAndGet();
    }

    @Override
    protected void reportInstancesLeak() {
        super.reportInstancesLeak();
        instancesLeakCounter.incrementAndGet();
    }
}
```
2016-06-20 11:14:44 +02:00
Xiaoyan Lin
9602535b7d Added isText to validate if a ByteBuf is compliant with the specified charset.
Motivation:

See #82.

Modifications:

- Added `isText` to validate if the given ByteBuf is compliant with the specified charset.
- Optimized for UTF-8 and ASCII. For other cases, `CharsetDecoder.decoder` is used.

Result:

Users can validate ByteBuf with given charset.
2016-06-20 07:32:05 +02:00
Norman Maurer
4dec7f11b7 [maven-release-plugin] prepare for next development iteration 2016-06-07 18:52:34 +02:00
Norman Maurer
cf670fab75 [maven-release-plugin] prepare release netty-4.1.1.Final 2016-06-07 18:52:22 +02:00
Norman Maurer
7137d22994 Ensure the correct wrapped buffer is released in AbstractPooledDerivedByteBuf.deallocate()
Motivation:

We need to first store a reference to the wrapped buffer before recycle the AbstractPooledDerivedByteBuf instance. This is needed as otherwise it is possible that the same AbstractPooledDerivedByteBuf is again obtained and init(...) is called before we actually have a chance to call release(). This leads to call release() on the wrong buffer.

Modifications:

Store a reference to the wrapped buffer before call recycle and call release on the previous stored reference.

Result:

Always release the correct wrapped buffer when deallocate the AbstractPooledDerivedByteBuf.
2016-06-06 09:49:42 +02:00
Norman Maurer
3a7dcde320 [#5224] Allow to use Unsafe.reallocateMemory(...) in UnpooledUnsafeNoCleanerDirectByteBuf.
Motivation:

If the user uses unsafe direct buffers with no cleaner we can use Unsafe.reallocateMemory(...) as optimization when we need to expand the buffer.

Modifications:

Use Unsafe.relocateMemory(...) in UnpooledUnsafeNoCleanerDirectByteBuf.

Result:

Less expensive expanding of buffers.
2016-06-04 19:21:41 +02:00
Norman Maurer
3d29bcfc8d Allow to create Unsafe ByteBuf implementations that not use a Cleaner to clean the native memory.
Motivation:

Using the Cleaner to release the native memory has a few drawbacks:

- Cleaner.clean() uses static synchronized internally which means it can be a performance bottleneck
- It put more load on the GC

Modifications:

Add new buffer implementations that can be enabled with a system flag as optimizations. In this case no Cleaner is used at all and the user must ensure everything is always released.

Result:

Less performance impact by direct buffers when need to be allocated and released.
2016-06-03 21:20:10 +02:00
Norman Maurer
db6b72da19 Add optimized version of setZero(...) / writeZero(...) for Unsafe*ByteBuf implementations
Motivation:

Unsafe offers a method to set memory to a specific value. This can be used to implement an optimized version of setZero(...) and writeZero(...)

Modifications:

Add implementation for all Unsafe*ByteBuf implementations.

Result:

Faster setZero(...) and writeZero(...)
2016-05-30 15:10:15 +02:00
Norman Maurer
6ca49d1336 [maven-release-plugin] prepare for next development iteration 2016-05-25 19:16:44 +02:00
Norman Maurer
446b38db52 [maven-release-plugin] prepare release netty-4.1.0.Final 2016-05-25 19:14:15 +02:00
Norman Maurer
7b25402e80 Add CompositeByteBuf.addComponent(boolean ...) method to simplify usage
Motivation:

At the moment the user is responsible to increase the writer index of the composite buffer when a new component is added. We should add some methods that handle this for the user as this is the most popular usage of the composite buffer.

Modifications:

Add new methods that autoamtically increase the writerIndex when buffers are added.

Result:

Easier usage of CompositeByteBuf.
2016-05-21 19:52:16 +02:00
Norman Maurer
2a14f74979 Ensure all methods are correctly override in *LeakAware*ByteBuf implementations
Motivation:

We missed to override a few methods and so some actions on the ByteBuf failed.

Modifications:

- Override all methods
- Add unit tests to ensure all is fixed.

Result:

All *LeakAware*ByteBuf have correct implementations
2016-05-21 07:28:13 +02:00
Norman Maurer
e10dca7601 Mark Recycler.recycle(...) deprecated and update usage.
Motivation:

Recycler.recycle(...) should not be used anymore and be replaced by Handle.recycle().

Modifications:

Mark it as deprecated and update usage.

Result:

Correctly document deprecated api.
2016-05-20 22:11:31 +02:00
Norman Maurer
d41f076419 Add more tests for PoolArenaMetric
Motivation:

We should add some more tests for PoolarenaMetric

Modifications:

Add more tests

Result:

Better test coverage for metrics
2016-05-20 21:56:36 +02:00
Norman Maurer
b83ffcc447 Add timeout to PooledByteBufAllocatorTest
Motivation:

Some tests in PooledByteBufAllocatorTest are blocking on a CountDownLatch. We should use a timeout on these tests so these will not block forever on a failure.

Modifications:

Add timeout param to @Test annotation

Result:

Have sane timeouts on tests.
2016-05-20 21:52:53 +02:00
Norman Maurer
43e91c2476 Correctly implement DefaultByteBufHolder.equals(...) and hashCode()
Motivation:

DefaultByteBufHolder.equals(...) and hashCode() should be implemented so it works correctly with instances that share the same content.

Modifications:

Add implementations and a unit-test.

Result:

Have correctly working equals(...) and hashCode() method
2016-05-20 21:43:40 +02:00
Trustin Lee
3a9f472161 Make retained derived buffers recyclable
Related: #4333 #4421 #5128

Motivation:

slice(), duplicate() and readSlice() currently create a non-recyclable
derived buffer instance. Under heavy load, an application that creates a
lot of derived buffers can put the garbage collector under pressure.

Modifications:

- Add the following methods which creates a non-recyclable derived buffer
  - retainedSlice()
  - retainedDuplicate()
  - readRetainedSlice()
- Add the new recyclable derived buffer implementations, which has its
  own reference count value
- Add ByteBufHolder.retainedDuplicate()
- Add ByteBufHolder.replace(ByteBuf) so that..
  - a user can replace the content of the holder in a consistent way
  - copy/duplicate/retainedDuplicate() can delegate the holder
    construction to replace(ByteBuf)
- Use retainedDuplicate() and retainedSlice() wherever possible
- Miscellaneous:
  - Rename DuplicateByteBufTest to DuplicatedByteBufTest (missing 'D')
  - Make ReplayingDecoderByteBuf.reject() return an exception instead of
    throwing it so that its callers don't need to add dummy return
    statement

Result:

Derived buffers are now recycled when created via retainedSlice() and
retainedDuplicate() and derived from a pooled buffer
2016-05-17 11:16:13 +02:00
Norman Maurer
30bb3094c1 [#5227] Fix race-condition in PooledByteBufAllocatorTest
Motivation:

PooledByteBufAllocatorTest.testNumThreadCachesWithNoDirrectArenas() had a race as it just used LockSupport.parkNanos(). We should better use a CountdownLatch and so be sure we really have init everything.

Modifications:

Replace LockSupport.parkNanos(...) with CountdownLatch usage

Result:

No more race in test.
2016-05-13 08:51:44 +02:00
Norman Maurer
2472d8c3cf [#5216] Correctly increment deallocationsHuge when call PoolArena.free
Motivation:

We called deallocationsHuge.decrement() but it needs to be increment()

Modifications:

Replace decrement() with increment()

Result:

Correct metrics.
2016-05-06 21:44:43 +02:00
Norman Maurer
9f5eb7d698 Add CharSequence operations to ByteBuf
Motivation:

Often users either need to read or write CharSequences to a ByteBuf. We should add methods for this to ByteBuf as we can do some optimizations for this depending on the implementation.

Modifications:

Add setCharSequence, writeCharSequence, getCharSequence and readCharSequence

Result:

Easier reading / writing of CharSequence with ByteBuf.
2016-05-06 16:52:00 +02:00
Carl Mastrangelo
cf07f984b1 Add @Deprecated when the javadoc says its deprecated
Motivation:

Reduce nag warnings when compiling, make it easier for IDEs to display what's deprecated.

Modifications:

Added @Deprecated in a few places

Result:

No more warnings.
2016-05-01 20:30:13 +02:00
Norman Maurer
d698746609 Add ByteBuf.asReadOnly()
Motivation:

We lately added ByteBuf.isReadOnly() which allows to detect if a buffer is read-only or not. We should add ByteBuf.asReadOnly() to allow easily access a read-only version of a buffer.

Modifications:

- Add ByteBuf.asReadOnly()
- Deprecate Unpooled.unmodifiableBuffer(Bytebuf)

Result:

More consistent api.
2016-04-14 10:51:20 +02:00
Jongyeol Choi
96455a9558 Implement codec-redis
Motivation:

- To encode/decode RESP (REdis Serialization Protocol) using Netty
- http://redis.io/topics/protocol

Modifications:

- Add RedisEncoder, RedisDecoder
- Add RedisBulkStringAggregator and RedisArrayAggregator
- Add tests

Result:

- Added codec-redis
- codec-redis can encode/decode RESP (REdis Serialization Protocol)
2016-04-14 10:23:16 +02:00
Norman Maurer
7d3ca7fb92 Fix IndexOutOfBoundsException when FixedCompositeByteBuf is constructed with an empty array.
Motivation:

When FixedCompositeByteBuf was constructed with new ByteBuf[0] and IndexOutOfboundsException was thrown.

Modifications:

Fix constructor

Result:

No more exception
2016-04-14 08:07:55 +02:00
Norman Maurer
4ddb81f36f Not cache SwappedByteBuf in AbstractByteBuf to reduce memory footprint.
Motivation:

We should not cache the SwappedByteBuf in AbstractByteBuf to reduce the memory footprint.

Modifications:

Not cache the SwappedByteBuf.

Result:

Less memory footprint.
2016-04-14 08:06:21 +02:00
Norman Maurer
2537880e5d Fix typo in exception message
Motivation:

Typo in exception message.

Modifications:

Fix the typo.

Result:

No more typo.
2016-04-14 08:03:35 +02:00
Trustin Lee
0b078314b2 Add ByteBuf.isReadOnly()
Motivation:

It is sometimes useful to determins if a buffer is read-only.

Modifications:

Add ByteBuf.isReadOnly()

Result:

One more feature
2016-04-13 21:41:27 +09:00
Trustin Lee
57063b6db0 Implement the ByteBuf methods that should have been overridden
Motivation:

Some ByteBuf implementations do not override all necessary methods,
which can lead to potentially sub-optimal behavior.

Also, SlicedByteBuf does not perform the range check correctly due to
missing overrides.

Modifications:

- Add missing overrides
- Use unwrap() instead of direct member access in derived buffers for
  consistency
- Merge unwrap0() into unwrap() using covariant return type
- Deprecate AbstractDerivedByteBuf and its subtypes, because they were
  not meant to be public

Result:

Correctness
2016-04-13 21:05:57 +09:00
Norman Maurer
572bdfb494 [maven-release-plugin] prepare for next development iteration 2016-04-10 08:37:18 +02:00
Norman Maurer
c6121a6f49 [maven-release-plugin] prepare release netty-4.1.0.CR7 2016-04-10 08:36:56 +02:00
Norman Maurer
6e919f70f8 [maven-release-plugin] rollback the release of netty-4.1.0.CR7 2016-04-09 22:13:44 +02:00
Norman Maurer
4cdd51509a [maven-release-plugin] prepare release netty-4.1.0.CR7 2016-04-09 22:05:34 +02:00
Norman Maurer
69070c37ba ByteBuf.readBytes(...) should use the allocator of the buffer to create the new buffer. Related to [#5093]
Motivation:

ByteBuf.readBytes(...) uses Unpooled.buffer(...) internally which will use a heap ByteBuf and also not able to make use of the allocator which may be pooled. We should better make use of the allocator.

Modifications:

Use the allocator for thenew buffer.

Result:

Take allocator into account when copy bytes.
2016-04-09 20:28:17 +02:00
Norman Maurer
200ca39b5c Add PooledByteBufAllocator.dumpStats() which allows to obtain a human-readable status of the allocator.
Motiviation:

Sometimes it is useful to dump the status of the PooledByteBufAllocator and log it. Doing this is currently a bit cumbersome as the user needs to basically iterate through all the metrics and compose the String. we would better provide an easy way to do this.

Modification:

Add dumpStats() method.

Result:

Easier to get a view into the status of the allocator.
2016-04-09 19:16:53 +02:00
Norman Maurer
cfa258e096 PoolChunkList.allocate(...) should return false without the need to walk all the contained PoolChunks when the requested capacity is too big.
Motivation:

PoolChunkList.allocate(...) should return false without the need to walk all the contained PoolChunks when the requested capacity is larger then the capacity that can be allocated out of the PoolChunks in respect to the minUsage() and maxUsage() of the PoolChunkList.

Modifications:

Precompute the maximal capacity that can be allocated out of the PoolChunks that are contained in the PoolChunkList and use this to fast return from the allocate(...) method if an allocation capacity larger then that is requested.

Result:

Faster detection of allocations that can not be handled by the PoolChunkList and so faster allocations in general via the PoolArena.
2016-04-09 19:00:20 +02:00
Norman Maurer
2ae97946dd Allow to retrieve the number of active bytes per PoolArena.
Motivation:

To better understand how much memory is used by Netty for ByteBufs it is useful to understand how many bytes are currently active (allocated) per PoolArena.

Modifications:

- Add PoolArenaMetric.numActiveBytes()

Result:

The user is able to get better insight into the PooledByteBufAllocator.
2016-04-09 18:54:05 +02:00
Norman Maurer
787a55874b Cleanup PoolChunk and PoolArena
Motivation:

To make it easier to understand PoolChunk and PoolArena we should cleanup duplicated code.

Modifications:

- Move reused code into methods
- Use Math.max(...)

Result:

Cleaner code and easier to understand.
2016-04-09 18:47:40 +02:00
Norman Maurer
1b4a5609d3 Not try to allocate out of the PoolChunkList that contains only full PoolChunks
Motivation:

When doing a normal allocation in PoolArena we also tried to allocate out of the PoolChunkList that only contains completely full PoolChunks. This makes no sense as these are full anyway so an allocation will never work here and just gives a perf hit as we need to walk the whole list of PoolChunks in the list.

Modifications:

Not try to allocate from PoolChunkList that only contains full PoolChunks

Result:

Faster allocation times when a new PoolChunk must be created.
2016-04-09 18:39:56 +02:00
Norman Maurer
7b121c26ae Use Math.min(...) and Math.max(...) as these are intrinsics.
Motivation:

We should better use Math utilities as these are intrinsics. This is a cleanup for ea3ffb8536.

Modifications:

Use Math utilities.

Result:

Cleaner code and use of intrinsics.
2016-04-06 21:30:32 +02:00
Norman Maurer
88b093c481 PoolChunkList not correctly move PoolChunks when these are moved.
Motivation:

When a PoolChunk needs to get moved to the previous PoolChunkList because of the minUsage / maxUsage constraints we always just moved it one level which is incorrect and so could lead to have PoolChunks in the wrong PoolChunkList (in respect to their minUsage / maxUsage settings). This then could have the effect that PoolChunks are not released / freed in a timely fashion and so.

Modifications:

- Correctly move PoolChunks between PoolChunkLists, which includes moving it multiple "levels".
- Add unit test

Result:

Correctlty move the PoolChunk to PoolChunkList when it is freed, even if its multiple layers.
2016-04-06 11:52:23 +02:00
Norman Maurer
ea3ffb8536 Fix PoolChunkList.minUsage() and maxUsage() for head and tail
Motivation:

The PoolChunkList.minUsage() and maxUsage() needs to take special action to translate Integer.MIN_VALUE / MAX_VALUE as these are used internal for tail and head of the linked-list structure.

Modifications:

- Correct the minUsage() and maxUsage() methods.
- Add unit test.

Result:

Correct metrics
2016-04-06 10:03:28 +02:00
Norman Maurer
4e779cd6b0 Allow to disable leak detection for all buffers when using UnpooledByteBufAllocator.
Motivation:

Sometimes it is useful to allow to disable the leak detection of buffers if the UnpooledByteBufAllocator is used. This is for example true if the app wants to leak buffers into user code but not want to put the burden on the user to always release the buffer.

Modifications:

Add another constructor to UnpooledByteBufAllocator that allows to completely disable leak-detection for all buffers that are allocator out of the UnpooledByteBufAllocator.

Result:

It's possible to disable leak-detection when the UnpooledByteBufAllocator is used.
2016-04-05 13:17:16 +02:00
Norman Maurer
1d23e358b4 Only increment metric for huge / normal allocations after the allocation was really done.
Motivation:

We should only increment the metric for the huge / normal allocation after it is done. Also we should only decrement once deallocate.

Modifications:

- Move increment after the allocation.
- Fix deallocation metric and move it after deallocation

Result:

More correct metrics.
2016-04-05 12:00:44 +02:00
Norman Maurer
b32e07c75a PoolThreadCache uses wrong variable in IllegalArgumentException
Motivation:

PoolThreadCache includes the wrong value when throwing a IllegalArgumentException because of freeSweepAllocationThreshold.

Modifications:

Use the correct value.

Result:

Correct exception message.
2016-04-05 11:48:38 +02:00
Trustin Lee
3b941c2a7c [maven-release-plugin] prepare for next development iteration 2016-04-02 01:25:05 -04:00
Trustin Lee
7368ccc539 [maven-release-plugin] prepare release netty-4.1.0.CR6 2016-04-02 01:24:55 -04:00
Norman Maurer
cee38ed2b6 [maven-release-plugin] prepare for next development iteration 2016-03-29 16:45:13 +02:00
Norman Maurer
9cd9e7daeb [maven-release-plugin] prepare release netty-4.1.0.CR5 2016-03-29 16:44:33 +02:00
Karas Lukáš
42419d918d Fix setBytes when source is read-only ByteBuffer and target is pooled buffer
Motivation:

The method setBytes creates temporary heap buffer when source buffer is read-only.
But this temporary buffer is not used correctly and may lead to data corruption.
This problem occurs when target buffer is pooled and temporary buffer
arrayOffset() is not zero.

Modifications:

Use correct arrayOffset when calling PlatformDependent.copyMemory.
Unit test was added to test this case.

Result:

Setting buffer content works correctly when target is pooled buffer and source
is read-only ByteBuffer.
2016-03-22 09:18:44 +01:00
Norman Maurer
28d03adbfe [maven-release-plugin] prepare for next development iteration 2016-03-21 11:51:50 +01:00
Norman Maurer
4653dc1d05 [maven-release-plugin] prepare release netty-4.1.0.CR4 2016-03-21 11:51:12 +01:00
Norman Maurer
8d499a2419 Fix calculation of PoolArena metrics after introducing a regression in 89da788fd2 2016-03-17 10:37:22 +01:00
Norman Maurer
daa4efcfef Add proper synchronization when access metrics.
Motivation:

We also need to add synchronization when access fields to ensure we see the latest updates.

Modifications:

Add synchronization when read fields that are written concurrently.

Result:

Ensure correct visibility of updated.
2016-03-17 09:05:48 +01:00
Xiaoyan Lin
01835fdf18 Add LineEncoder to append a line separator automatically
Motivation:

See #1811

Modifications:

Add LineEncoder and LineSeparator

Result:

The user can use LineEncoder to write a String with a line separator automatically
2016-03-16 20:31:01 +01:00
Norman Maurer
6796604f46 Remove double spacing
Motivation:

We had some double spacing in the methods which should be removed to keep things consistent.

Modifications:

Remove redundant spaces.

Result:

Cleaner / consistent coding style.
2016-03-16 10:25:48 +01:00
Norman Maurer
7d12333c38 Add final keyword which was missing in 47b598e6ce
Motivation:

The two fields should have final keyword.

Modifications:

Add final keyword

Result:

Cleaner code.
2016-03-16 10:25:00 +01:00
buchgr
83c349ffa9 Fix wrong use of assertTrue in unit test.
Motivation:

My previous commit b88a980482 introduced a flawed unit test,
that executes an assertion in a different thread than the test thread.
If this assertion fails, the test doesn't fail.

Modifications:

Replace the assertion by a proper workaround.

Result:

More correct unit test
2016-03-15 16:02:33 +01:00
buchgr
b88a980482 Change arena to thread cache mapping algorithm to be closer to ideal.
Motivation:
Circular assignment of arenas to thread caches can lead to less than optimal
mappings in cases where threads are (frequently) shutdown and started.

Example Scenario:
There are a total of 2 arenas. The first two threads performing an allocation
would lead to the following mapping:

Thread 0 -> Arena 0
Thread 1 -> Arena 1

Now, assume Thread 1 is shut down and another Thread 2 is started. The current
circular assignment algorithm would lead to the following mapping:

Thread 0 -> Arena 0
Thread 2 -> Arena 0

Ideally, we want Thread 2 to use Arena 1 though.

Presumably, this is not much of an issue for most Netty applications that do all
the allocations inside the eventloop, as eventloop threads are seldomly shut down
and restarted. However, applications that only use the netty-buffer package
or implement their own threading model outside the eventloop might suffer from
increased contention. For example, gRPC Java when using the blocking stub
performs some allocations outside the eventloop and within its own thread pool
that is dynamically sized depending on system load.

Modifications:

Implement a linear scan algorithm that assigns a new thread cache to the arena
that currently backs the fewest thread caches.

Result:

Closer to ideal mappings between thread caches and arenas. In order to always
get an ideal mapping, we would have to re-balance the mapping whenever a thread
dies. However, that's difficult because of deallocation.
2016-03-15 14:16:34 +01:00
buchgr
35771dd1cd Fix race in PoolArena.allocate. Fixes #4829
Motivation:

The statistic counters PoolArena.(allocationsTiny|allocationsSmall) are
not protected by a per arena lock, but by a per size class lock. Thus,
two concurrent allocations of different size (class) could lead to a
race and ultimately to wrong statistics.

Modifications:

Use a thread-safe LongCounter instead of a plain long data type.

Result:

Fewer data races.
2016-03-14 08:57:46 +01:00
Xiaoyan Lin
e2d4e22243 Add CharsetUtil.encoder/decoder() methods
Motivation:

See #3321

Modifications:

1. Add CharsetUtil.encoder/decoder() methods
2. Deprecate CharsetUtil.getEncoder/getDecoder() methods

Result:

Users can use new CharsetUtil.encoder/decoder() to specify error actions
2016-03-07 10:48:31 +00:00
Scott Mitchell
94f27be59b ByteBufUtil writeUtf8 and writeAscii helper methods
Motivation:
Utility methods in ByteBufUtil to writeUtf8 and writeAscii expect a buffer to already be allocated. If the user does not have a buffer allocated they have to know details of the encoding in order to know the size of the buffer to allocate.

Modifications:
- Add writeUtf8 and writeAscii which take a ByteBufAllocator and allocate a ByteBuf of the correct size for the user

Result:
ByteBufUtil methods which are easier to use if the user doesn't already have a ByteBuf.
2016-02-29 10:09:06 +01:00
Norman Maurer
ca443e42e0 [maven-release-plugin] prepare for next development iteration 2016-02-19 23:00:11 +01:00
Norman Maurer
f39eb9a6b2 [maven-release-plugin] prepare release netty-4.1.0.CR3 2016-02-19 22:59:52 +01:00
Norman Maurer
74495fd27f Add advanced leakdetection for methods introduced by [#4842]
Motivation:

[#4842] introduced 4 new methods but missed to implement advanced leak detection for these.

Modifications:

Correctly implement advanced leak detection for these methods.

Result:

Advanced leak detection works for all methods as expected.
2016-02-17 09:40:42 -08:00
Xiaoyan Lin
ccb0870600 Add methods with position independent FileChannel calls to ByteBuf
Motivation

See ##3229

Modifications:

Add methods with position independent FileChannel calls to ByteBuf and its subclasses.

Results:

The user can use these new methods to read/write ByteBuff without updating FileChannel's position.
2016-02-14 20:37:37 -08:00
Scott Mitchell
691bc1690e ByteBufUtil.writeUtf8 not consistent with String.getBytes(Charset)
Motivation:
f750d6e36c added support for surrogates in the writeUtf8 conversion. However exceptions are thrown if invalid input is detected, but the JDK (and slow path of writeUtf8) uses a replacement character and does not throw. We should behave the same way.

Modificiations:
- Don't throw in ByteBufUtil.writeUtf8, and instead use a replacement character consistent with the JDK

Result:
ByteBufUtil.writeUtf8 behavior is consistent with the JDK UTF_8 conversion.
2016-02-11 08:24:26 -08:00
Norman Maurer
19907030d1 [#4841] Fix segfault if UnpooledUnsafeHeapByteBuf.getShort(..) is used and UNALGINED access is not possible.
Motivation:

We missed to take the byte[] into account when try to access the bytes and so produce a segfault.

Modifications:

Correctly pass the byte[] in.

Result:

No more segfault.
2016-02-05 09:24:32 +01:00
Norman Maurer
75a2ddd61c [maven-release-plugin] prepare for next development iteration 2016-02-04 16:51:44 +01:00
Norman Maurer
7eb3a60dba [maven-release-plugin] prepare release netty-4.1.0.CR2 2016-02-04 16:37:06 +01:00
Scott Mitchell
6312c2f00b CompositeByteBuf.addComponent always assume reference count ownership
Motivation:
The current interface for CompositeByteBuf.addComponent is not clear under what conditions ownership is transferred when addComponent is called. There should be a well defined behavior so that users can ensure that no leaks occur.

Modifications:
- CompositeByteBuf.addComponent should always assume reference count ownership

Result:
Users that call CompositeByteBuf.addComponent do not have to independently check if the buffer's ownership has been transferred and if not independently release the buffer.
Fixes https://github.com/netty/netty/issues/4760
2016-02-02 11:38:11 -08:00
Norman Maurer
1c417e5f82 [maven-release-plugin] prepare for next development iteration 2016-01-21 15:35:55 +01:00
Norman Maurer
c681a40a78 [maven-release-plugin] prepare release netty-4.1.0.CR1 2016-01-21 15:28:21 +01:00