- Avoid some needlessly complex equations for calculating the color at a
point in a gradient field.
- Avoid calculating certain values multiple times.
- Use similar variable names across the two versions of the get_color
function where practical.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When compositing a no-reflect gradient, 'before' the gradient is empty,
but 'after' the gradient is padded with the final color. Both sides are
supposed to be empty.
This is fixed by moving the virtual stops to match the first and last
client-supplied stops for no-reflect gradients, then causing everything
'before' the initial virtual stop and 'after' the final virtual stop to
emit rgba(0,0,0,0). This does not impact gradients using the other
reflect modes.
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If _pt_distance is negative, it causes the final distance to be negative
in the repeat-reflect case. Moving the scaling by _pt_distance earlier
avoids this problem, and simplifies some equations as a bonus.
Bugzilla: https://bugs.freedesktop.org/98508
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: Fix "orignal" too (review feedback by ajax, change by anholt)_
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
This converts two client arrays users to using vbos,
this is necessary to move to using core profile later.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
v2: fixup whitespace
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
By dropping the unconditional logic op disable at the end of
rendering, this fixes GL errors being thrown in GLES2 contexts (which
don't have logic ops). On desktop, this also means a little less
overhead per draw call from taking one less trip through the
glEnable/glDisable switch statement of doom in Mesa.
The exchange here is that we end up taking a trip through it in the
XV, Render, and gradient-generation paths. If the glEnable() is
actually costly, we should probably cache our logic op state in our
screen, since there's no way the GL could make that switch statement
as cheap as the caller caching it would be.
v2: Don't forget to set the logic op in Xephyr's drawing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
There's no reason to waste memory storing redundant copies of the same
pointer all over the system; just pass in pointers as necessary to
each function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
These were used by the non-standard glamor implementation in the intel
driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
All users of glamor had the same value set, and it complicated things
for no reason.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Now that we have the DIX global state for the current context, we
don't need to track nesting to try to reduce MakeCurrent overhead.
v2: Fix a mistaken replacement of a put_context with make_current in
glamor_fill_spans_gl() (caught by keithp).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com> (v1)
We don't use fixed function rendering, so there is no need to reset
the program at all. This lets the driver avoid checking for state
changes between draw calls when we rebind the same program.
Improves xephyr x11perf -f8text performance by 6.03062% +/- 1.64928%
(n=20)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Flagged by cppcheck 1.64:
[glamor/glamor_gradient.c:987] -> [glamor/glamor_gradient.c:991]:
(performance) Variable 'repeat_type_uniform_location' is
reassigned a value before the old one has been used.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
This will help tools like fips, apitrace, or INTEL_DEBUG=shader_time
provide useful information about the shaders in use.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
We don't call GL in this function any more, so we can just drop the
get.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
GLES2 sensibly doesn't allow you to attach multiple shaders for the
same stage to a single program. This means we have to attach the
whole thing in one glShaderSource call.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
They never get reattached to any other program, so saving them to
unreference later is a waste of code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Assuming it was the first attribute assigned by the GL, it would have
ended up with location 0 anyway.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It used to be the thing that returned your dispatch table and happeend
to set up the context, but now it just sets up the context.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Libepoxy hides all the GL versus GLES2 dispatch handling for us, with
higher performance.
v2: Squash in the later patch to drop the later of two repeated
glamor_get_dispatch()es instead (caught by keithp)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
After increase to gcc4.7, it reports more warnings, now
fix them.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Tested-by: Junyan He<junyan.he@linux.intel.com>
We seperate the composite to two phases, firstly to
select the shader according to source type and logic
op, setting the right parameters. Then we emit the
vertex array to generate the dest result.
The reason why we do this is that the shader may be
used to composite no only rect, trapezoid and triangle
render function can also use it to render triangles and
polygens. The old function glamor_composite_with_shader
do the whole two phases work and can not match the
new request.
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
This is the first commit to add support for large pixmap.
The large here means a pixmap is larger than the texutre's
size limitation thus can't fit into one single texutre.
The previous implementation will simply fallback to use a
in memory pixmap to contain the large pixmap which is
very slow in practice.
The basic idea here is to use an array of texture to hold
the large pixmap. And when we need to get a specific area
of the pixmap, we just need to compute/clip the correct
region and find the corresponding fbo.
We need to implement some auxiliary routines to clip every
rendering operations into small pieces which can fit into
one texture.
The complex part is the transformation/repeat/repeatReflect
and repeat pad and their comination. We will support all of
them step by step.
This commit just add some necessary data structure to represent
the large pixmap, and doesn't change any rendering process.
This commit doesn't add real large pixmap support.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
The x_source and y_source cause some problem in
gradient. The old way to handle it by recaulate P1 P2
to minus the x_source and y_source, but this causes
problem in radial shader. Now we modify the manner to
set the texture coordinates: (x_source, y_source) -->
(x_source + width, y_source + height) to handle all the
cases.
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
1. The vertical and horizontal judgement in linear
gradient have problem when p1 point and p2 point
distance is very small but the gradient pict have a
transform matrix which will convert the X Y coordinates
to small values. So the judgement is not suitable.
Because this judgement's purpose is to assure the
divisor not to be zero, so we simply it to enter
horizontal judgement when p1 and p2's Y is same.
Vertical case is deleted. 2. Delete the unused p1 p2
uniform variable.
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Some gradient set the stops at the same position, for
example: firstly 0.5 to red color and then set 0.5 to
blue. This kind of setting will cause the shader work
not correctly because the percentage caculating need to
use the stop[i] - stop[i-1] as dividend. The previous
patch we just kill some stop if the distance between
them is 0. But this cause the problem that the color
for next stop is wrong. We now modify to handle it in
the shader to avoid the 0 as dividend.
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
The macro like "#define LINEAR_SMALL_STOPS 6 + 2" causes
the problem. When use it to define like "GLfloat
stop_colors_st[LINEAR_SMALL_STOPS*4];" The array is
small than what we supposed it to be. Cause memory
corruption problem and cause the bug of render wrong
result. Fix it.
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
1. Extract the logic of gradient from the glamor_render.c
to the file glamor_gradient.c.
2. Modify the logic of gradient pixmap gl draw. Use the
logic like composite before, but the gradient always just
have one rect to render, so no need to set the VB and EB,
replace it with just call glDrawArrays. 3.Kill all the
warning in glamor_render.c
Reviewed-by: Zhigang Gong<zhigang.gong@linux.intel.com>
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>