This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 987579c930 moves main.c into
into libmain.a to be linked with separately, and updates the various
DDXs to link with libmain.a, except Xwin, which also needs this change.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
It reports vertical size in cm in the detailed mode.
X.Org bug#21750 <http://bugs.freedesktop.org/show_bug.cgi?id=21750>
Reported-by: Peter Poklop <Peter.Poklop@gmx.at>
Signed-off-by: Julien Cristau <jcristau@debian.org>
This way clients querying the gamma value via the VidMode extension at least
get the last value set via the same, rather than always something bogus.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
The reciprocal gamma value was missed in the first copy and this mistake was
propagated to the second one.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Error: Write outside array bounds at Xext/geext.c:406
in function 'GEWindowSetMask' [Symbolic analysis]
In array dereference of cli->nextSib[extension] with index 'extension'
Array size is 128 elements (of 4 bytes each), index <= 128
Error: Buffer overflow at dix/events.c:592
in function 'SetMaskForEvent' [Symbolic analysis]
In array dereference of filters[deviceid] with index 'deviceid'
Array size is 20 elements (of 512 bytes each), index >= 0 and index <= 20
Error: Read buffer overflow at hw/xfree86/loader/loader.c:226
in function 'LoaderOpen' [Symbolic analysis]
In array dereference of refCount[new_handle] with index 'new_handle'
Array size is 256 elements (of 4 bytes each), index >= 1 and index <= 256
These bugs were found using the Parfait source code analysis tool.
For more information see http://research.sun.com/projects/parfait
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A driver with this hook will take care of preparing the outputs & crtcs,
so calling the prepare functions will just cause unnecessary flicker.
Fixes bug #21077
For redirected rendering we end up with pixmaps (which the app thinks are
windows) that are double buffered.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Pierre Willenbrock <pierre@pirsoft.de>
Zapping is triggered by xkb these days, so note in the man page that it's the
Terminate_Server action. Since it's XKB, personal preferences towards or
against zapping should be achieved through xkb rulesets.
If Terminate_Server is not in the xkb actions, then we can't zap anyway and we
don't need a default of DontZap "on".
This patch restores the old meaning of DontZap - disallow zapping altogether,
regardless of XKB's current keymap.
Ideally, this patch should be accompanied by b0f64bdab00db652e in
xkeyboard-config.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This change implements the protocol for DRI2GetBuffersWithFormat, but
the bulk of the differences are the changes to the extension / driver
interface to make this function work. The old CreateBuffers and
DeleteBuffers routines are replaced with CreateBuffer and DeleteBuffer
(both singular).
This allows drivers to allocate buffers for a drawable one at a time.
As a result, 3D drivers can now allocate the (fake) front-buffer for a
window only when it is needed. Since 3D drivers only ask for the
front-buffer on demand, the real front-buffer is always created. This
allows CopyRegion impelemenations of SwapBuffers to continue working.
As with previous version of this code, if the client asks for the
front-buffer for a window, we instead give it the fake front-buffer.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
commit 64b7f96dca accidentally inverted the comparison, could
result in crashes on some systems later on.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
This prevents building an older server with a new dri2proto.h from
resulting in a DRI2 extension module that lies about the version it
supports.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Rotation matrix for pointer coordinates was incomplete and pointers with
absolute coordinates did not work correctly in xserver (kdrive) when the
sceen was rotated other than by 0 degrees.
Signed-off-by: David Jander <david.jander@protonic.nl>
Signed-off-by: James Cloos <cloos@jhcloos.com>
Virtually all callers use
XkbGetRulesDefault(&rmlvo);
InitKeyboardDeviceStruct(..., rmlvo);
Let's save them the trouble and accept NULL as a hint to take the
default RMLVO.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
After the call to xf86ActivateDevice, the new device will be added to
inputInfo.devices. However, if the subsequent call to ActivateDevice
fails, the correponding InputInfoRec for the device is deleted but an
entry still remains in inputInfo.devices. This might lead to a server
crash later on (on InitAndStartDevices for instance) when the device
control proc would be called for an invalid device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This happened because we put a byte in the fd to wake up dispatch, but we never actually enqueued anything in mieq because the num_events was 0.
(cherry picked from commit c21ca7558d)
If a front-buffer is requested for a window, add the fake front-buffer
to the list of requested buffers.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Currently no code path exhibits the broken behavior since we only toggle into rootless if we don't have the root.
(cherry picked from commit 970f100ca3)
The changes actually caused all windows to move to the current space. Instead, we're going with a fix entirely within Xplugin that depends on quartz-wm being the window-manager for now.
(cherry picked from commit 997b6f3142)
Otherwise if X11.app was activated with a mouse click, the location of the even is the last location of the cursor before X11 was deactivated
(cherry picked from commit c7457d7b31)
This panel reports its vertical size in cm.
X.Org bug#21000 <http://bugs.freedesktop.org/show_bug.cgi?id=21000>
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Patch courtesy of Codeweavers
Fix mouse movement tracking. For a non-window-related mouse-move event,
calculate the new position by adding the event's delta-x and delta-y values
to the previous mouse position. Do not rely on the current mouse position
because it may have been changed by a XWarpPointer call.
(cherry picked from commit 7a67935b05)
Otherwise APM events get treated as input events, which messes up idle
time accounting and screensavers and such. Not, we hope, that anyone
is using APM anymore.
Replace multi-stage filtering with simple linear velocity,
tracked several instances backwards. A heuristic ensures
only approximately linear motion is considered, so velocity
remains valid in any case. Numerical stability is much
better, and nothing changes to people who didn't tune the
advanced features of the previous algorithm.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
remove a few lines which redo part of the pointer acceleration
init. Properties is the way to go for them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix this bug report:
,----< from http://bugzilla.freedesktop.org/show_bug.cgi?id=20504 >
| Using the Visual StaticGray (8 bit depth) is missing one gray level.
| The gray level of index zero and index one are the same and all
| other levels are shifted by one. The max level (255) cannot be used.
`----
Signed-off-by: James Cloos <cloos@jhcloos.com>
We'll now only mention the E-EDID segment register if the device is
actually E-EDID-capable. While we're here, check for DDC/CI and
standard EEPROM support too.
There is a separate panning region check, but that doesn't work under
transformation, so just pre-clip the mouse coordinates when computing the
panning offsets. This leaves the case where panning constants are changing
unresolved.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=18710 .
As this can't work without new EXA_PREPARE_AUX* indices, this requires a major
version bump, so we can also drop the UploadToScratch driver hook and
ExaOffscreenSwap*(). So this also fixes
http://bugs.freedesktop.org/show_bug.cgi?id=20213 .
Moreover, introduce EXA_DRIVER_KNOWN_MAJOR to break compilation of drivers
which may not be able to handle EXA_PREPARE_AUX*, giving instructions how to
make them build again in the #error message.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
GLX_EXT_texture_from_pixmap was broken since commit
a26c77ff43 ('glx: fix retval checks when failures
occur for drawable creation.')
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
DeleteInputDeviceRequest function doesn't handle "virtual" devices well.
TightVNC libvnc.so module to X (which makes bare Xorg VNC capable) uses such
kind of devices.
Bare Xvnc (it is something like Xvfb) simply uses AddInputDevice &
RegisterDevice functions. Xvnc uses DeleteInputDeviceRequest from Xi/stubs.c
so everything works fine (now I see that DeleteInputDeviceRequest in
Xi/stubs.c should call RemoveDevice function, shouldn't it? :) )
Situation is quite different when you use libvnc.so module. It uses same
schema as Xvnc, so it simply calls AddInputDevice & RegisterDevice. Thus
device is created correctly. When server is terminated it calls
DeleteInputDeviceRequest (now from hw/xfree86/common/xf86Xinput.c) for each
device. Here is the difference - Xvnc calls DeleteInputDeviceRequest from
Xi/stubs.c as I wrote above. Thus Xorg gets sigsegv because "VNC" devices
don't have real input driver.
X.Org Bug 20087 <http://bugs.freedesktop.org/show_bug.cgi?id=20087>
[This isn't really a fix (libVNC should behave correctly) but not crashing the
server sounds like an improvement.]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Fix keyboard layout mapping table entry for Windows keyboard layout 0x80a
(Latin American), layout should (now) be 'latam', not 'la' which is Laos
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Seems we're less divorced from XKB than we'd like for now... hopefully not having any rules installed will still let us override things the way we want to...
This was causing a crash randomly, due to random memory contents.
Use xcalloc to prevent this in the future, due to future changes or mistakes.
Set the drawableType to include GLX_PIXMAP_BIT and GLX_PBUFFER_BIT.
The new libGL supports these.
Set the max Pbuffer width/height, based on the results of a test program.
We may someday want to revisit this depending on what users need, so that
we create a CGLContextObj, make it current, and call glGetIntegerv to
gather the information at runtime.
(cherry picked from commit c7e3383309)
Extensions section was added in X11R6.8.0 and documented in the release notes:
http://www.x.org/archive/X11R6.8.0/doc/RELNOTES2.html#3
but never made it into the man page.
Also fix a bonus typo.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
It had a copy and paste mistake that I didn't notice. :/
It was using the CreatePixmapReq.
Also add a missing B16 to the end of the length for the DestroyPixmapReq struct.
Now the AppleDRIDestroyPixmap request seem to work.
(cherry picked from commit 295fe25bd8)
Was only used to provide a list of input devices that XF86-Misc could use,
now that XF86-Misc is gone, was parsed and logged, then completely ignored.
(Depends on previous patch that introduces OBSOLETE_TOKEN in parser to
make obsolete keywords like InputDevices & RgbPath be non-fatal errors.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Xorg shouldn't refuse to run just because the user has an xorg.conf that
had the previously-used RgbPath keyword in it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
When the crtc transformation changes, the entire crtc must be repainted.
This was being done by clearing the shadow and then painting the rectangle
containing the screen image; the clear being required as the screen image
may not fill the crtc. When changing the transform rapidly, this leads to
flashing. Eliminate the clear by painting the entire crtc instead of just
the screen rectangle.
Signed-off-by: Keith Packard <keithp@keithp.com>
This involved wrapping some GCOps to get the proper behavior
when using X11 raster ops mixed with OpenGL (see driWrap.c).
This extends the AppleDRI protocol with create and destroy pixmap
functions.
The dri.c code has been extended quite a bit to enable this, and
to initialize the wrapping of CreateGC for GCOps.
This has been tested with tests/glxpixmap and proven to work with
the new libGL. Existing applications seem to work fine too. Redraws
all appear to be correct.
There may be some bugs lurking that I haven't found yet. I plan
to drive them out by extending the libGL test suite.
(cherry picked from commit 630518766b)
a9d7d659.. (PCI: Remove pciBusAddrToHostAddr and associated nonsense)
removes pciBusAddrToHostAddr(), but not its prototype, resulting in:
./.libs/libxorg.a(sdksyms.o):(.data.rel+0xe64): undefined reference to
`pciBusAddrToHostAddr'
Signed-off-by: Chris Ball <cjb@laptop.org>
This was all a glorified no-op. We rely on pciaccess to create device
maps anyway, so we should have no reason to care about what the host
address is.
Acked-by: Ian Romanick <ian.d.romanick at intel.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
All you get for standard timing descriptors is horizontal size in
multiples of 8 pixels (which means you can't say 1366) and height in
terms of aspect ratio (which means you can't say 768). You'd like to
just fuzzy-match this by walking the DMT list for sufficiently close
modes, but you can't because DMT is useless and only defines a 1360x768
mode, because it's _also_ specified in terms of character cells despite
providing pixel exact timings. Neither can you use CVT or GTF to
generate the timings, because they _also_ believe that modes have to be
a multiple of 8 pixels.
You'd also hope you could find a timing definition for this in CEA, but
you can't because CEA only defines transmission formats that actually
exist. So there's 480p, 720p, and 1080p, but no 768p. And why would
there be, after all, the encoded signal is never 768p so obviously no
one would ever make a display in that format.
So instead, make a CVT mode since that's likely to be handled well by
just about everything, smash the horizontal active down by 2, and shift
the sync pulse by 1. Underscanning the hard way.
Pass the suicide.
Otherwise drivers have to refuse interlace twice: once in the output
config, and once in ->valid_mode() to catch output and config modes.
If you can't do interlaced modes, asking nicely for it in the config
isn't going to suddenly make it work.
By making the "Unable to open config file" header a warning, it was
not appearing with the filename when a config file was specified and
not found. Now we make it an error message again, but only issue
the error if a filename was specified - if none was specified, then
we don't even issue a warning, just the "Using autoconfig" info message.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
being exported correctly by Xplugin.
This should fix a bug with the surface for a window, when an export fails.
Before the export could fail and leave behind an invalid (freed) pointer in the dix privates.
I have an idea of how to fix the GLXPixmaps now without using CGLSetOffScreen.
This work is a step towards that. The Xplugin will need a small patch to fix an
issue that this change brought forth.
(cherry picked from commit 58c4116c47)
An update to the keyboard layout mapping table which updates some no longer valid keyboard layout names
(e.g. de_CH -> ch -variant de) and adds a few more reported layouts
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Function 'winProcessXEventsTimeout()' is declared 'static Bool' and
defined 'static int' (correct) in 'winclipboardwndproc.c'. This has been
wrong since dot, but luckily was of no significance
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The clipboard should only select PropertyChange events and do this on
the correct window, the messaging window for the clipboard not the root
window!
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix prototypes of winOverrideIcon(), winTaskbarIcon() and winOverrideDefaultIcon() to return HICON
Also use HICON type in WINPREFS stucture
Remove various casts these changes make unnecessary
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix old-style definition warnings caused by definitions with empty
parameter lists "()", which should be "(void)" to indicate the function
takes no parameters, rather than unspecified parameters
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
With trying to match depths so that you didn't end up with a depth 24
fbconfig for the 32-bit composite visual, I broke the alpha bits on the depth
24 X visual, which angered other applications. But in fixing that, the
pickFBconfigs code for "minimal" also could end up breaking GLX visuals if
the same FBconfig was chosen for more than one X visual.
We have no reason to not expose as many visuals as possible, but the old
"all" mode didn't match any existing X visuals to GLX visuals, so normal
GL apps didn't work at all.
Instead, replace it with a simple combination of the two modes: Create GLX
visuals by picking unique FBconfigs with as many features as possible for
each X visual in order. Then, for all remaining FBconfigs that are
appropriate for display, add a corresponding X and GLX visual.
This gets all applications (even ones that aren't smart enough to do FBconfigs)
get all the options to get the visual configuration they want. The only
potential downside is that the composite ARGB visual is unique and gets a
nearly full-featured GLX visual (except that the root visual might have taken
the tastiest FBconfig), which means that a dumb compositing manager could
waste resources. Write compositing managers using FBconfigs instead, please.
This patch gets the shadow scanout buffer repainted on panning area changes.
It does not, however, track the mouse correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the shadow scanout buffer can be re-used, the underlying framebuffer
area must be damaged so that the scanout will be repainted. This patch
delays the addition of that damaged area until after the transform in the
crtc has been updated, otherwise the old transform would have been used and
the wrong area repainted.
Signed-off-by: Keith Packard <keithp@keithp.com>
generic.c:80: warning: ‘read_legacy_video_BIOS’ defined but not used
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86IsOptionSet is rarely the right function to use for boolean options because
it returns TRUE whenever the option is present, even if its value is "no",
"off", "0", etc.
Changes MakeAtom to take a const char * and NameForAtom to return them,
since many callers pass pointers to constant strings stored in read-only
ELF sections. Updates in-tree callers as necessary to clear const
mismatch warnings introduced by this change.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix a stray '}'
Update to use RMLVO interface
Remove g_winInfo.xkb.disable, can never be set since noXkbExtension has been removed
Change to retrieve modifier key state using XkbStateFieldFromRec() from Colin Harrison
Update to use XKB defaults from xkb-config.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
This avoids 32-bit access which might affect other registers. The linux code
uses gcc flags to get this to happen, but this seems like more of a sure thing.
Drivers not using the new hw/xfree86/modes code would crash in DRI due to
that code trying to monitor CRTC changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
We report the EDID values in RandR, and we let people configure whatever
they like for the screen in xorg.conf. Reporting the EDID values in the core
means applications get inconsistent font sizes in the default configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
In the X log, upon module load, it prints a line similar to the following.
> (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
The attached patch removes the extra / before the module name.
Code already exists in hw/xfree86/loader/loadmod.c:InitPathList to add a
trailing slash if needed, removing the one added by sprintf is harmless.
Signed-off-by: James Cloos <cloos@jhcloos.com>
Also correct a link failure due to unresolved symbols. This
is arguably a libtool/ranlib/ld bug, that "may" be corrected
by linking all convenience libraries in a single one. But in
this case, it was preferred to just add a linker option to
Xfake_LDFLAGS, to force linkage of all libraries.
This corrects #19725.
Commit 08363c5830 added call to
XkbGetRulesDflts defined in xkbsrv.h
Signed-off-by: Magnus Kessler <Magnus.Kessler@gmx.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Otherwise, for example, when hacking config/*.c, it is required to
run make clean on that directory, to ensure the proper libconfig.a
will be linked in the generated Xorg binary.
Xnest was not updated in the last batch of xkb changes. This
patch is basically cut&paste from hw/kdrive/src/kinput.c and
hw/kdrive/ephyr/ephyr.c, and appears to generate a Xnest as
functional as before the xkb changes.
Instead of always keeping two copies of the keymap, only generate the
core keymap from the XKB keymap when we really need to, and use the XKB
keymap as the canonical keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keyboard map notifications are always generated from within XKB code,
which also takes care of copying the keysyms, etc. If you need to
mangle the keymap yourself, generate a new core keymap/modmap, and pass
it to XkbApplyMappingChange.
SendMappingNotify is renamed to SendPointerMappingNotify (and ditto its
Device variants), which still only _sends_ the notifications, as opposed
to also doing the copying a la XkbApplyMappingChange.
Also have the modmap change code traverse the device hierachy, rather
than just going off the core keyboard.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since modifierKeyMap is generated from modifierMap, just remove it, and
only generate it when we need to send the modifier map to the client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XkbInitKeyboardDeviceStruct is now the only valid keyboard
initialisation: all the details are hidden behind here. This now makes
it impossible to supply a core keymap at startup.
If dev->key is valid, dev->key->xkbInfo->desc is also valid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Prepare for the impending removal of the state field by disabling this hack
for a while: it's hell of nasty and I'm amazed it ever really worked.
Basically, on focus out, it should do as current DDXes do and fake releases
for all keys (not just mangle the core state) that are currently down;
buttons too. When focus comes back in, we already have a KeymapNotify that
lets us know what's currently down, so we can use this to fake the
appropriate keypresses, and send it through the event routing layer.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
If we can't enable a device, bail out of NewInputDeviceRequest rather than
blithely continuing. Also, be more verbose when initialization failed. Also,
be more verbose when initialization failed. Also, be more verbose when
initialization failed. Also, be more verbose when initialization failed.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix internal WM to notify X when the keyboard focus is lost to a pure Windows window in -multiwindow mode.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix internal WM so it only allows WM_MOUSEWHEEL messages to act on the client area of a focused window.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix internal WM to correctly parent XA_WM_TRANSIENT_FOR windows in -multiwindow mode when a windows window is created,
and to de-iconize parent windows when a child window acquires focus.
XXX: Perhaps we should also shuffle parent(s) forward through Z-order when a child acquires focus?
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Correct the tooltip text for the toolbar X icon to be strictly correct, 'display-number:screen' should be ':display-number.screen'.
Also for the default window title.
Adjust the style of the Windows title in XDMCP mode from 'Xming - hostname' to 'hostname:display-number.screen'.
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
There were a few spots left in the source that were using the
--with-mesa-source defined headers or the now removed $(top_srcdir)/GL
directory. These aren't needed anymore as all the necessary source for
GLX is in $(top_srcdir)/glx.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Using GL for the PKG_CHECK_MODULES identifier multiple times means only
the first call will actually be used. Later calls will be skipped due to
GL_CFLAGS and GL_LIBS already being set. This changes DRI to using a
different identifier and DMX to just reusing GL_CFLAGS.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
The previous check for AEI on left us with the possibility that AEI is forced
off in the config, but devices are added through evdev nonetheless. A keyboard
added this way can CTRL+C the server. Even when we use kbd, we can set the
mode to RAW, so it's safer alround to to so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split DRICreateSurface into 3 functions.
Make CreateSurfaceForPixmap use xp_configure_surface. I suspect this is partly why
GLXPixmaps never worked.
It will require some more work and thoughts for pbuffers, unless we fake those with
pixmaps and surfaces.
(cherry picked from commit 9cf264e677)
Reorder some header files and provide some types earlier on.
Remove the static __GLXextensionInfo __glDDXExtensionInfo; that isn't
used in 1.4 or 1.5, and seems to have been removed from 1.6. Remove
the data structures associated with that too.
Remove __glXAquaDrawableResize. The GLX structure doesn't use
it anymore, and the Apple version did nothing useful before.
__glXAquaDrawableSwapBuffers(): base no longer contains a drawGlxc
member. Now provide the the Apple/Aqua context in the __GLXAquaDrawable
struct. Add the context member to the __GLXAquaDrawable struct.
Remove the fallback configs. They aren't used in 1.4 or 1.5 either.
Remove init_visuals(). It's not used in 1.4 or 1.5 either.
In the drawable constructor initialize the state properly, including
the new context member.
Remove glAquaResetExtension() -- it's not used anymore.
This has been tested remotely and proven to work with glxgears,
fire, various texture programs I wrote, and various Mesa demos.
(cherry picked from commit d514152195)
Reduce MOUSE_POLLING_INTERVAL from 500ms to 50ms
In -multiwindow mode, this determines how quickly X windows can track the mouse
when it is outside any X window... Move the cursor around an xeyes, and you will
see what this timing effects.
rlAccel is not longer compatable, and it's not worth fixing
Don't override DeviceCursorInitialize with a noop
Don't do a SwitchCoreKeyboard (which wasn't even needed in the first place)
(cherry picked from commit c137f68168)
Use a __GLXconfig linked list struct to store the configurations for the
fbconfigs and visuals in a pGlxScreen.
Also, remove the __GLXvisualConfig/GlxSetVisualConfigs code that isn't used
anymore. There is more code we can remove later, but I want to do that in
separate commits.
(cherry picked from commit 94162b0f8a)
Previously it is possible that creating rotation data, then cleaning
up and creating again so that pScreen->BlockHandler and
xf86_config->BlockHandler all point to xf86RotateBlockHandler.
See bug #19343.
