The shadow frame buffer and other data used for rotation need to be freed
when the crtc is disabled, not just when rotation is disabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the basename of header file processed by cpp matches $top_srcdir,
check for extern symbols in the output, and add to the xorg_symbols
vector.
Possibly a better solution then using this script would be to somehow
tell the linker to not drop any symbols from the binary being generated.
Thanks to David Miller for noticing a make problem with sdksyms.c
not being regenerated when sdksyms.sh is updated. This is not yet the
best solution; automake generates dependency for sdksyms.o, but the
build really should also regenerate sdksyms.c when sdksyms.o needs to
be regenerated.
Export the symbols in miext/cw/cw.h. These symbols are in libxaa, and
at least the nvidia driver uses them. Maybe cw.h should be installed
in the sdk.
The awk script was incorrectly referencing the struct name, and
not the struct variable.
Also added some comments to sdksyms.sh, for the reason it generates
the "symbol table" and add a message to the generated file, telling
is was automatically generated.
Traditional posix awk doesn't know about \W and whilst we check that
awk exists in configure.ac we don't check which awk we are using.
This corrects symbol generation for posix only awk.
The kbd driver may send events during device initialisation, and these events
need the EQ set up already.
X.Org Bug 18890 <http://bugs.freedesktop.org/show_bug.cgi?id=18890>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As suggested by Julien Cristau
This is an follow-up to
commit 9c5dd7337f
Author: Peter Hutterer <peter.hutterer@redhat.com>
Date: Wed Dec 3 14:24:25 2008 +1000
Let the DDX decide on the XkbRulesDefaults.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Acked-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
drv and idev are only set for SDs, but are only dereferenced for SDs too, so
initializing them to NULL is safe.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
These are private symbols, but used by the X Server.
The newly exported symbols were not added to the sdk headers.
Optionally, libxf86config could be compiled without hidden symbols
when being installed.
Thanks to Maarten Maathuis for noticing the problem.
It is declared as
<hash>ifdef HAVE_ACPI
Bool xf86acpiDisableFlag = FALSE;
<hash>endif
in hw/xfree86/common/xf86Globals.c
but not protected by the ifdef in the sdk header xf86Priv.h, what
caused a build failure in the tinderbox, due to the address of the
symbol being taken (to ensure it is available) in sdksyms.c.
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
If not taking the symbol addresses, linkage will break badly, as not
all symbols will be present, and it also requires changing library order,
and/or making some changes like the "libosandcommon".
This table should be modified to be generated automatically, as
it is required to "fool" the compiler/loader into adding all required
symbols to the X Server.
Those tables were once used to decide what symbols are visible to
modules, but they were outdated. The only real usage was that, since
it was taking the address of symbols, linkage should fail if the
symbols were not available.
Now the proper way to make symbols available to modules should
be to use the _X_EXPORT macro, or not compile with hidden symbols,
so that all symbols would be available.
All symbols in the tables were revised to ensure they are exported,
and only symbols that were not exported are ClientSleepUntil() and
DuplicateModule(), that were not in the sdk for quite some time
already, and should not have any users outside of the X Server
(and/or builtin modules).
The attribute should be set on header files to make it easier to
manage what symbols are available to modules.
_X_EXPORT should be used in sources only for special cases, like
symbols that must be visible by non video/input driver/modules but
should not be "advertised" in the sdk.
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Also, no need to call ShowCursor when SetCursorPosition already does it
Based on a previous patch by Maarten Maathuis
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
When leaving 3D games such as quake3 or sauerbraten, a cursor may stay on the
screen. This is caused by one run of SW rendering for the SD, even though the
SD was attached to the VCP and thus has HW rendering capabilities.
Check for the SD's attachment (like in all other functions) before deciding on
SW or HW rendering.
X.Org Bug 16805 <http://bugs.freedesktop.org/show_bug.cgi?id=16805>
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Just ignore devices after MAXDEVICES has been reached, but warn the user that
the devices are ignored.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This is done to actually change DIX_CFLAGS, as not all "modules" use
XORG_CFLAGS.
Also export the symbols that are required by other modules after
the change.
- Remove remaining references to XFree86-Misc options AllowNonLocalModInDev
and DisableModInDev.
- Remove remaining references to grab-breaking keys & associated options.
- Update description of Ctrl-Alt-Backspace to new -retro/DontZap defaults.
- Add description of new options -modalias and -showopts.
- Update list of modules loaded by default.
- Update input driver references from keyboard to evdev & kbd.
- Update list of driver man pages to match xf86-*-* drivers with man pages.
- Add See Also section to exa man page.
and various formatting/typo/etc. fixes.
The Xorg/xorg.conf sections on input device selection could use further
updates to better match the current state of HAL-enabled configuration.
The warnings corrected were only the ones that should correct
real problems. The most common one is 64 bit integers as
"printf %l" arguments.
Note that there is a patch related to this at:
http://bugs.freedesktop.org/show_bug.cgi?id=18204
These symbols were removed from the X Server, or never declared.
One symbol that may need special attention is XkbBuildCoreState(),
that doesn't have a prototype anywhere, but is called from
xkb/xkbEvents.c:XkbFilterEvents(), and also used by the macros
XkbStateFieldFromRec() and XkbGrabStateFromRec() defined in
include/xkbstr.h.
fb/wfbrename.h also may need some cleanup, as it makes several
"renames" of non existing symbols.
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
This patch exports all symbols required by the compilable
(in a x86 linux computer) xorg/driver/* modules.
Still missing symbols worth mentioning are:
sunleo
miFindMaxBand no longer available
intel (uxa/uxa-accel.c)
fbShmPutImage no longer available (and should have been static)
mga
MGAGetClientPointer (should come from matrox's libhal)
This is not a definitive "visibility" patch, as all it does is to
export missing symbols, but the modules that current don't compile,
may require more symbols once fixed, and third party drivers should
also require more symbols exported.
A "definitive" patch should export symbols defined in the sdk.
../../../../hw/xfree86/xaa/xaaTables.c:9:14: warning: symbol 'byte_expand3' was not declared. Should it be static?
../../../../hw/xfree86/xaa/xaaTables.c:53:14: warning: symbol 'byte_reversed_expand3' was not declared. Should it be static?
The patch removes all macros in the format
define xf86_sym ((type (*)(argument-list))LoaderSymbol("sym"))
creates a new macro in the format
define xf86_sym sym
and ensures "sym" is a "visible" symbol.
The patch doesn't add or remove features, and is source and binary
compatible with previous shared objects (with the difference that it
requires the dlloader).
These symbols are a special case, as, due to the fact that LoaderSymbol
was being used to reference them, they are not easily found by "automated"
tools that check for missing symbols. And now it also have the benefit
that the compiler/loader "knows what is going on".
pixman 0.13.2 now holds all of the matrix operations. This leaves
the protocol conversion routines and some ABI stubs in place
Signed-off-by: Keith Packard <keithp@keithp.com>
Includes fixes for:
"xf86Config.c", line 2434: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 312: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "../../../hw/xfree86/common/xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 438: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
"xf86Modes.c", line 701: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
helper_exec.c: In function ‘port_rep_inb’:
helper_exec.c:219: warning: implicit declaration of function
‘DEBUG_IO_TRACE’
helper_exec.c:219: warning: nested extern declaration of
‘DEBUG_IO_TRACE’
Doing projective transforms required repositioning the cursor using the
hotspot, but that requires relocating the upper left corner in terms of said
hotspot.
Instead of using a separate function to notify DIX about transform changes,
add the transform to RRCrtcNotify so that the whole Crtc state changes
atomically.
RandR matrix computations lose too much precision in fixed point;
computations using the inverted matrix can be as much as 10 pixels off.
Convert them to double precision values and pass those around. These API
changes are fairly heavyweight; the official Render interface remains fixed
point, so the fixed point matrix comes along for the ride everywhere.
Add APIs to xf86RandR12 support and randr extension to record whether the
driver supports transforms, report that value in the RRGetCrtcTransform
reply.
New RRCrtcGetTransform function in DIX that DDX can use to get the pending
transform. The DDX code should be complete; the DIX code is just a stub at
this point.
Drivers that care about crtc positions on the screen to ensure that vblank
works correctly need to be notified when crtcs are changed.
Provide a hook in the mode setting code that is invoked whenever any
configuration is done to the screen.
Use this new hook in the DRI code so that DRI clients are notified and
receive updated information.
Signed-off-by: Keith Packard <keithp@keithp.com>
The xfree86 server previously hat NewInputDeviceRequest and InitInput, and
both basically did the same thing. Reduce NIDR to parameter checking and use
xf86NewInputDevice from both InitInput and NIDR to actually create the device.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When the linux kernel sets the NX bit vm86 segfaults when it tries to execute
code in memory that is not marked EXEC. Such code gets called whenever
we return from a VBIOS call to signal the calling program that the call
is actually finished and that we are not trapping for other reasons (like
IO accesses).
Use mprotect(2) to set these memory ranges PROT_EXEC.
There's little chance that we'll get the input devices at runtime without HAL,
we might as well force the server to add mouse/kbd devices automatically -
just like in the olden days.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
These values need not be constrained to integer values.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
As reported in http://bugs.freedesktop.org/show_bug.cgi?id=18438
the server suggests reconfiguring HAL if AllowEmptyInput is enabled
and no input devices are known.
Instead of that notice, if HAL is disabled at configure time,
AllowEmptyInput is enabled in the config and no input devices are
found report those facts and recommend disabling AllowEmptyInput.
When using any XAAPixmapOps, we call into unknown but freshly
unwrapped callbacks (like fb ones). Unlike the XAA*Fallback calls,
we did so without syncing first, exposing us to all kinds of
synchronisation issues.
I believe that the rendering errors appeared now because *PaintWindow
vanished (e4d11e58), and we just use miPaintWindow instead. This
takes a less direct route to the hw and ends up at
PolyFillRectPixmap, which very often left drawing artifacts.
We now sync accordingly, and no longer get the rendering artifacts i
was methodically reproducing on radeonhd, radeon, unichrome...
Also, in order to allow driver authors to remove extensive syncing
or flushing to hide this issue, create XAA_VERSION_ defines, put
them in xaa.h and bump the patchlevel.
(novell bug #435791)
When setting the depth to 24, leave bpp unset so the logic to pick
a supported value is used instead of ignoring the driver's preference
and forcing 32 bpp.
Works around a silly bug in the kernel that causes wakeup storms after
too many keypresses. Should fix the kernel bug too, but this at least
keeps the idle wakeup count below 1000/sec.
When a user specifies the position of an output for which no modes exist
(for whatever reason) assume that the width and height of this output
is 0. The result will be the same as if this output isn't taken into
consideration at all and thus should be sane. It will prevent a segfault
when trying to determine the width and height of a non-existent mode.
Also merge sun_bios.c into sun_vid.c and upstream Solaris patch to
keep aperture device open, to allow mappings to occur after X server
has given up uid 0.
Maybe one day I stop doing stupid patches like
a3a7c12fcf.
So, if X < low, reset to low, and _not_ to high.
If X > high, reset to high, and _not_ to low.
This consists of two parts:
In the implicit server layout, ignore those drivers when looking for a core
device.
And after finishing the server layout, run through the list of devices and
remove any that use mouse or kbd.
AEI is mutually exclusive with the kbd and mouse drivers, so pick either - or.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The precedence of == is higher than that of &, so that code was
probably buggy.
xf86Init.c: In function 'DoModalias':
xf86Init.c:300: warning: suggest parentheses around comparison in operand of &
xf86Init.c:304: warning: suggest parentheses around comparison in operand of &
xf86Init.c:308: warning: suggest parentheses around comparison in operand of &
xf86Init.c:136: warning: function declaration isn't a prototype
xf86Init.c:243: warning: function declaration isn't a prototype
xf86Init.c:249: warning: function declaration isn't a prototype
xaaInit.c: In function 'XAAInit':
xaaInit.c:201: warning: implicit declaration of function 'miInitializeCompositeWrapper'
xaaInit.c:201: warning: nested extern declaration of 'miInitializeCompositeWrapper'
Add missing includes to fix the following warnings:
xf86DGA.c: In function 'DGAProcessKeyboardEvent':
xf86DGA.c:1050: warning: implicit declaration of function 'UpdateDeviceState'
xf86DGA.c:1050: warning: nested extern declaration of 'UpdateDeviceState'
xf86Xinput.c: In function 'xf86ActivateDevice':
xf86Xinput.c:303: warning: implicit declaration of function 'AssignTypeAndName'
xf86Xinput.c:303: warning: nested extern declaration of 'AssignTypeAndName'
xf86Xinput.c:311: warning: implicit declaration of function 'DeviceIsPointerType'
xf86Xinput.c:311: warning: nested extern declaration of 'DeviceIsPointerType'
xf86Xinput.c:324: warning: implicit declaration of function 'XkbSetExtension'
xf86Xinput.c:324: warning: nested extern declaration of 'XkbSetExtension'
Add automatic detection of the graphic driver to load for sbus devices.
This allows xorg to work on those devices without a "Device" section.
Debian bug#483942.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Also set AutoAddDevices and AutoEnableDevices to their defaults.
And in doing so, switch the rest of the defaults over to named intializers.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Usually, the console is set to RAW in the kbd driver. If we hotplug all input
devices (i.e. the evdev driver for keyboards) and the console is left as-is.
As a result, the evdev driver must put an EVIOCGRAB on the device to avoid
characters leaking onto the console. This again breaks many things, amongst
them lirc, in-kernel mouse button emulation and HAL.
This patch sets the console to RAW if AllowEmptyInput is on.
Use-cases:
1. AEI is off
1.1. Only kbd driver is used - behaviour as-is.
1.2. kbd and evdev driver is used: if evdev does not grab the device,
duplicate events are generated.
2. AEI is on
2.1. Only evdev driver is used - behaviour as-is, but evdev does not need
to grab the device anymore.
2.2. evdev and kbd are used: duplicate key events are generated if evdev
does not grab the device.
1.2 is a marginal use-case that can be fixed by adding a "grab" option to the
evdev driver (update of xorg.conf is needed).
2.2 is an issue. If we have no ServerLayout section, AEI is on, but devices
specified in the xorg.conf are still added [1], resulting in duplicate events.
This is a common configuration and needs sorting out.
[1] 2eaed4a10f
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
I've seen about one case in three years where this has actually been
correlated with the real cause of failure, and we've trained people to
freak out about X_WARNING, so let's be less alarmist.
Very cute, Samsung, not only do you claim to be 16cm by 9cm in the
global size record, you also claim to be 160mm by 90mm in the detailed
timings. Grrr.
NIDR should be used to create a new SD from e.g. within a driver.
DIDR should be used to remove a device from the server.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
If you need to bail out the server, use Ctrl-Alt-Fx, or enable zapping
if it bothers you that much. If Ctrl-Alt-Fx is broken, nag me until
it's permanently fixed.
The nvidia driver currently uses these hooks to work around problems where RAC
will disable access to the hardware at unexpected times. This change restores
these hooks until we can come up with a better API for working around RAC.
This reverts commit c1df4fbede.
The nvidia driver currently uses these callbacks to work around problems where
RAC will disable access to the hardware at unexpected times. This change
restores these hooks until we can come up with a better API for working around
RAC.
This reverts commit d7c0ba2e9e.
Conflicts:
hw/xfree86/loader/xf86sym.c
Some BIOSes (hi XGI!) will attempt to enumerate the PCI bus by asking
for the config space of every possible device number. This despite
perfectly functional BIOS methods to enumerate the bus exactly.
If anyone can come up with an example of a bus where:
- both i/o and memory resources are addressable
- access to them can be controlled
- but they can't be controlled independently
then by all means, reinstate this logic.
Under the terms of version 1.1, "once Covered Code has been published
under a particular version of the License, Recipient may, for the
duration of the License, continue to use it under the terms of that
version, or choose to use such Covered Code under the terms of any
subsequent version published by SGI."
FreeB 2.0 license refers to "dates of first publication". They are here
taken to be 1991-2000, as noted in the original license text:
** Original Code. The Original Code is: OpenGL Sample Implementation,
** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
** Copyright in any portions created by third parties is as indicated
** elsewhere herein. All Rights Reserved.
Official FreeB 2.0 text:
http://oss.sgi.com/projects/FreeB/SGIFreeSWLicB.2.0.pdf
As always, this code has not been tested for conformance with the OpenGL
specification. OpenGL conformance testing is available from
http://khronos.org/ and is required for use of the OpenGL logo in
product advertising and promotion.
The check can fail because the output from FBIOGET_VSCREENINFO is used to set
Clock in fbdev2xfree_timing(). Then in fbdevHWSetMode(), xfree2fbdev_timing()
is called which sets the pixclock based on Clock. The resulting circle results
in slight rounding errors, causing the comparision check in fbdev_modes_equal
to fail.
- Redo damage naming for more consistency.
- Call post submission functions only where appropriate.
- EXA can now live without it's odd damage workarounds.
No point warning about missing driver hooks, that just means the person
who gave you the driver is inept. Might as well just crash. Also,
just name anonymous screens as screen%d instead of failing after the 36th
screen. Bonus points if you can figure out what the failure mode would
be on the 36th screen, and what the effective screen limit was.
There is no way this code can have been building for anyone since pciaccess
was merged. BSD and Linux were already using OS code on sparc, the only
people who could want this are Solaris, who should be using pciaccess
anyway.
This code was effectively only used in ix86Pci.c to select PCI config
access type. Nobody should be using that path anymore, in the glorious
pciaccess world; kernel services should get it right for you.
the defaults from InitVelocityData() or hypothetic driver-side changes
are now respected, not overridden.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device doesn't have any BARs then it's just a stub for some
lame operating systems that need one PCI device per output for
multihead. No point in warning about it.
It's all a bit wonky since both sis(4) and xgi(4) claim to support the
Volari Z7 and V5/8 (0x0020 and 0x0040), so let's side with xgi(4), why
not. Note that the V3 (not V3XT) identifies itself as a trident chip.
Put out a warning if xorg.conf has InputDevice sections, but these aren't
referenced in the used ServerLayout. This is only performed if AllowEmptyInput
is enabled.
The reason behind this is that the server used to auto-add the first
mouse/keyboard sections if none where referenced. Now, with HAL and AEI
enabled by default, setups that relied on this auto-adding break and are left
without input devices. The least we can do is warn them.
Us shipping a GUI configuration utility (especially as part of the
server!) was pretty pointless. There was pretty much nothing it could
configure which wasn't already runtime adjustable: if you could get a
server up with functioning input and output, there wasn't much xorgcfg
could do for you.
Au revoir.
- Use a single common function to compute reducedness.
- Call it from both the old-school and new-school mode validation paths.
- Define monitor reduced-blanking support in accord with EDID 1.4.
- Attempt to filter RB DMT modes away from the "standard" EDID pool if
the monitor doesn't claim RB support.
On some panels you end up with all of:
- No range descriptor
- No description of physical connectivity
- Native panel size mode in standard timings list
In principle you're supposed to use the timings for that mode from the DMT
spec, but in practice the DMT spec has timings for both 1920x1200 normal
and 1920x1200RB, and the standard timing field gives you no way to
distinguish. And, of course, the non-RB timings don't fit in a single
DVI link.
A couple #if defined(Lynx) && defined(sun) had become just if defined(sun),
resulting in wrong settings for Solaris builds, so they're now just deleted.
OsInitColors always just returned TRUE, so just remove calls to it and
insane special-case logic. Remove unused kcolor.c implementation, and
merge oscolor.h into oscolor.c since it was the only user. Remove
open-coded strncasecmp in oscolor.c.
Since we no longer need to call OsInitColors after reading the config
file, just call PostConfigInit() from one place, and move PM handling to
one place so we can install the signal handlers earlier.
If devices are prepended to the list, their wake-up order on resume is not the
same as the original initialisation order. Hot-plugged devices, originally
inited last, are re-enabled before the xorg.conf devices and in some cases may
steal the device files. Result: we have different devices before and after
suspend/resume.
RedHat Bug 439386 <https://bugzilla.redhat.com/show_bug.cgi?id=439386>
- Allow returning multiple drivers to try for a given PCI id (for instance,
try "geode" then "amd" for AMD Geode hardware)
- On Solaris, use VIS_GETIDENTIFIER ioctl as well as PCI id to choose drivers
- Use wsfb instead of fbdev as a fallback on non-Linux SPARC platforms
Remove AEI check from configImpliedLayout as the setting isn't actually parsed
at this point anyway (written by Sasha Hlusiak).
Resurrect checkInput() and check for devices there if AEI is false (this also
creates the default devices if required).
Set AllowEmptyInput to enabled by default if hotplugging is enabled.
If no Screen is specified in the ServerLayout section, either take the first
one from the config file or autogenerate a default screen.
X.Org Bug 16301 <http://bugs.freedesktop.org/show_bug.cgi?id=16301>
RandR 1.1 has a physical size for each mode. It used to be that the DIX would
remember these modes and pass them back up to the DDX when changing the screen
configuration. The DDX uses RR_GET_MODE_MM to query the driver for the physical
dimensions of the screen, allowing it to preserve the DPI.
With RandR 1.2, the physical dimensions are stored as part of the output, rather
than per mode. The DIX only uses the sizes passed in from the DDX to select the
mode pool for the "default" output, and forgets the physical sizes. Then, when
reconfiguring the screen, it makes up a new RRScreenSizeRec using the dimensions
from the output, screwing up the DPI.
This change works around this problem by ignoring the DIX and querying the real
size from the driver.
This reverts commit 76576c87b0.
which was an incorrect revert of previous ABI bumps. Those
responsible for the accidental ABI bumps in both directions
have all been sacked.
This allows xf86-input-mouse to build again, for example.
Spiritual revert of 1fa4de80fc. Intel's C
compiler claims to be gcc-compatible; if they're not defining the same
macros as gcc then that's their bug, not ours. Even if we were to do
this aliasing we should do it once and for all in servermd.h.
Use only %di to name the PCI register to read/write, rather than %edi.
DOS is only expecting the base PCI config space anyway, and the BIOS
might be using the high bits of %edi.
Yes, this is a 486+ instruction and thus not strictly legal in vm86
mode, but enough BIOSes use it (looking at you VIA) that we might as
well implement it.
In the single output enabled case we never enter the loop and test
never gets set and so we fail to match a good mode.
This was causing my 2560x1600 to end up at 2048x1536.
The problem happens if Monitor/Card combo doesn't provide EDID info,
and the XFree86-VidModeExtension extension is used.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Recording damage from other operations (e.g. creating a client damage record)
may confuse the migration code resulting in corruption.
Option "EXAOptimizeMigration" appears safe now, so enable it by default. Also
remove it from the manpage, as it should only be necessary on request in the
course of bug report diagnostics anymore.
GNU/kFreeBSD defines __FreeBSD_kernel__, but not __FreeBSD__.
Unify preprocessor conditionals between variable declaration and use.
Debian bug #482550.
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
This copies over the files generated from mesa/src/mesa/glapi. There's
a corresponding mesa commit that makes it easy to generate the glapi files
straight into the xserver tree when the XML definitions change.
The only few files that are copied from mesa but aren't generated are
glapi.[ch] and glthread.[ch]. Everything in there is technically DRI
driver API and the whole setup is still a bit fragile, but it's not a new
problem.
The --with-mesa-source configure option is still around since other
parts of the server (XGL and DMX - grep for MESA_SOURCE) need that,
but for common case of building with GLX and AIGLX support, that
option is no longer needed.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
If the monitor isn't reduced-blanking (either through EDID logic, or
config file setting), then remove RB modes from the default pool. Any
RB modes from the driver and config file pools will stick around though;
you asked for them, you got them.
Seeing as this code seems to be specific to OpenBSD I don't think
__x86_64__ should have been added there at all. It appears to have
been added wherever __amd64__ existed before which is wrong. I
think that part of the commit should be reverted but also all four of
the checks should be __OpenBSD__ && __amd64__ instead of two one
direction and two flipped.
The first guess used to be "is the preferred mode for one output the
preferred mode on all outputs". Instead, do "find the largest mode that's
preferred for at least one output and available on all outputs".
Old logic was just the first one that happened to have an associated
CRTC. The new logic tries to find one that's definitely connected, has
probed modes, and has the largest candidate mode.
It was removed and simplified some conditionals. We don't need test for
pDev->isMaster inside xf86CursorSetCursor() because only MD enters there.
In the last chunk, ScreenPriv fields were being assigned without need, so
that code was wrapped inside the conditional to avoid it.
I also tried to make the identation more sane in some parts that I touched.
Signed-off-by: Tiago Vignatti <vignatti@c3sl.ufpr.br>
Minor modification, part of the original patch led to cursors not being
updated properly when controlled through XTest.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
The only function that cat set SWCursor before xf86DeviceCursorInitialize()
is xf86InitCursor() when VCP and is created.
Signed-off-by: Tiago Vignatti <vignatti@c3sl.ufpr.br>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Missing parameter caused event processing to go nuts when checking valuators.
X.Org Bug 15936 <http://bugs.freedesktop.org/show_bug.cgi?id=15936>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Since glyphs are stored in pixmaps now, they can make their way into VRAM,
which invalidates a bunch of fast-path assumptions in the XAA code. Thus
you end up doing color-expands or WriteBitmap from la-la land and your
aliased glyphs go all funny.
Since XAA isn't ever growing the ability to do sane glyph accel, just force
glyph pixmaps into host memory by catching them at CreatePixmap time.
We need a manual call to SetCursor when we switch from SW to HW rendering and
the other way round. This way we display the new cursor after removing the old
one.
In addition, we only update the internal state for the VCP's sprite. This way,
when we switch back to HW rendering the state is up-to-date and wasn't
overwritten with the other sprite's state.
The second part is a hack. It would be better to keep a state for each sprite,
but then again we don't have hardware that can render multiple cursors so we
might as well do with the hack.
Switches back to HW cursors when sprites other than the VCP are removed.
The current state requires the cursor to change shape once before it updates
to SW / HW rendering (whatever is appropriate), e.g. by moving into a
different window. Until this is done, the cursor is invisible.
This patch only creates a Files section if required, so if no entries are
added, an empty Files section will not be created.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
LeaveVT/EnterVT cycles will free/realloc shadow frame buffers. Because of
this, the presense/absence of that data is insufficient to know whether
the screen function wrappers are necessary. Instead, the 'transform_in_use'
flag should be used.
This patch also adds 'xf86RotateFreeShadow' for drivers to use at LeaveVT
time to free the rotation data; it will be reallocated on EnterVT.
In DeleteInputDeviceRequest, leave the conf_idev (which is shared with
xf86ConfigLayout.input) alone for devices that were specified in the
ServerLayout section of the config file. This way, in the next server
generation we are left with what was the original config and can thus re-init
the devices.
This is an addon to 6d22a9615a, an attempt to
fix Bug 14418.
X.Org Bug 15645 <https://bugs.freedesktop.org/show_bug.cgi?id=15645>
X.Org Bug 14418 <https://bugs.freedesktop.org/show_bug.cgi?id=15645>
The previous check works in the master-branch, but doesn't work with MPX. We
actually copy the SD's information into the MDs public.devicePrivate, so we
need to explicitly check whether a device is a MD before freeing the module.