Fixes Piglit test "swapbuffersmsc-return swap_interval 0".
Ensure that *swap_target gets initialized on any 'return Success' path,
even if the swap request can't be completed by the driver and the server
falls back to a simple blit. That path can also be triggered by setting
swap_interval to 0, which disables sync to vertical retrace.
We originally found this bug because for some reason SDL2 automatically
sets swap_interval to 0, when we were trying to test OML_sync_control in
an SDL2 test application. We then discovered that the above-mentioned
Piglit test has been failing for the same reason since it was
introduced.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
swap_target is an out-parameter that needs to be set to the value that
SBC will take on after this SwapBuffers request completes.
However, it was also being used as a temporary variable to hold the MSC
at which the SwapBuffers request got scheduled to occur. This confusion
makes it harder to reason about whether swap_target is being set
correctly for its out-parameter usage. (Hint: It isn't.)
For the latter use, it makes more sense to use the existing target_msc
variable, which already has the right value unless target_msc, divisor,
and remainder are all 0, in which case we can set it using swap_interval
as usual.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Theo Hill <Theo0x48@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
I'm not sure what we'd do in this case anyways, other than fatal
error.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Make it clear that we intentionally ignore the -switchCmd return
value. This keeps GCC from emitting a warning when the server is
compiled with -D_FORTIFY_SOURCE=2.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This was added for DRM_IOCTL_SET_VERSION support, which has been around
for over ten years now. Since we require ≥2.3.0 in configure.ac this
would really only protect you if you managed to build against a modern
libdrm but run against one that's more than 7½ years old, which, doctor
it hurts when I do this.
Archaeology: http://cgit.freedesktop.org/~ajax/dri/commit/xc/programs/Xserver/GL/dri/dri.c?id=77d62efca033dced96ab7998b7c62a4e2df907d5
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Handle the unported case by issuing a build-time and run-time warning.
And add support for FreeBSD kernel based systems, by using the
VT_GETINDEX ioctl to check if the file descriptor is on a virtual
console.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not printing the program name produces very confusing messages that
might be difficult to attribute while trying to diagnose problems,
let's be explicit about who we are.
Also add a missing "/" between SUID_WRAPPER_DIR and "Xorg.bin".
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The libdrm.pc file gives us the correct include path, do not try to
hardcode it on the source, as it might vary on the installed system,
for example on Debian-based systems it's under /user/include/libdrm/.
Signed-off-by: Guillem Jover <guillem@hadrons.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
load_cursor_argb() may need to be able to fail and have the server fall back
to a software cursor in at least the following circumstances.
1) The hardware can only support some ARGB cursors and this does not just
depend on cursor size.
2) Virtual hardware may not wish to pass through a cursor to the host at a
particular time but may wish to accept the same cursor at another time.
This patch adds a return value to the API and makes the server do the
software fall-back on failure.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
An X11 client may need to know whether the X server virtual terminal is
currently the active one. This change adds a root window property which
provides that information. Intended interface user: the VirtualBox Guest
Additions.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Started out as an Xorg module to be used from Xorg drivers to let
Xorg run under a wayland server. The idea was to be able to reuse the
2D acceleration from the Xorg driver. Now with glamor being credible,
a better plan is to just make Xwayland its own DDX, similar to Xwin
and Xquartz. This is a much better fit, as much of the code in the
original approach had to hack around Xorg doing Xorg things like take
over the VT, probe input devices and read config files. Another big win
is that Xwayland dosn't need to be setuid root.
The Xwayland support for DRI3, Glamor and render nodes was done by
Axel Davy <axel.davy@ens.fr>, who also did a lot of work on the rebase
to the Xwayland DDX.
Contributions from:
Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Corentin Chary <corentin.chary@gmail.com>
Daniel Stone <daniel@fooishbar.org>
Kristian Høgsberg <krh@bitplanet.net>
Robert Bragg <robert@linux.intel.com>
Scott Moreau <oreaus@gmail.com>
Tiago Vignatti <tiago.vignatti@intel.com>
Giovanni Campagna <gcampagn@redhat.com>
Jonas Ådahl <jadahl@gmail.com>
Ray Strode <rstrode@redhat.com>
Trevor McCort <tjmccort@gmail.com>
Rui Matos <tiagomatos@gmail.com>
Axel Davy <axel.davy@ens.fr>
Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
This reverts commit b5a61239e2.
Not only did I screw up and introduce a warning, it turns out
glXChooseFBConfig() explicitly ignores this attribute. Thanks, GLX.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
When no logfile was specified (xf86LogFileFrom == X_DEFAULT) and we're not
running as root log to $XDG_DATA_HOME/xorg/Xorg.#.log as Xorg won't be able to
log to the default /var/log/... when it is not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather then a full path prefix, this is a preparation patch for adding
support for logging to another location when not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Include os.h for ErrorF() to fix implicit-function-declaration warnings when
configured with --enable-debug.
hw/xfree86/parser/DRI.c: In function 'xf86parseDRISection':
hw/xfree86/parser/DRI.c:87:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
hw/xfree86/parser/Extensions.c: In function 'xf86parseExtensionsSection':
hw/xfree86/parser/Extensions.c:77:5: error: implicit declaration of function 'ErrorF' [-Werror=implicit-function-declaration]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Build fbcmap_mi.c once, rather than once for each DDX, and make it part of libfb
or libwfb convenience library.
Since 84e8de1271 we don't have fbcmap.c
This is a sort of revert of 17d85387d1
v2: Remove libkdrivestubs.la from configure.ac
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The XResizeWindow call wasn't replaced by the xcb equivalent, so we
were no longer setting the initial window size, only wm size hints.
Regression from commit a2b73da "Xephyr: start converting hostx.c over to
xcb"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74849
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reported-by: Laércio de Sousa <lbsousajr@gmail.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Glamor has a mode where pixmaps will be constructed from numerous
small FBOs. This allows testing of the tiled pixmap code without
needing to create huge pixmaps.
However, the render glyph code assumed that it could create a pixmap
large enough for the glyph atlas. Instead of attempting to fix that
(which would be disruptive and not helpful), I've added a new pixmap
creation usage, GLAMOR_CREATE_NO_LARGE which forces allocation of a
single large FBO.
Now that we have pixmaps with varying FBO sizes, I then went around
and fixed the few places using the global FBO max size and replaced
that with the per-pixmap FBO tiling sizes, which were already present
in each large pixmap.
Xephyr has been changed to pass GLAMOR_CREATE_NO_LARGE when it creates
the screen pixmap as it doesn't want to deal with tiling either.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
When we're using server managed-fds through systemd-logind, systemd-logind
*must* keep running while we are using it, as it does things like drmSetMaster
and drmDropMaster for us on vt-switch.
On a systemd-logind restart, we cannot simply re-connect since we will then
get a different fd for the /dev/dri/card# node, and we've tied a lot of
state to the old fd. I've discussed this with the systemd people, and in the
future there may be a restart mechanism were systemd-logind passed fds from
the old logind to the new logind. But for now there answer is simply:
"Don't restart systemd-logind", and there never really is a good reason to
restart it.
So to ensure unpleasentness if people do decide to restart systemd-logind
anyways (or when it crashes), monitor logind going away and make this a fatal
error. This avoids getting a hard-hung machine on the next vt-switch and will
hopefully quickly educate users to not restart systemd-logind while they have
an X session using it active.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
All files specified in AC_CONFIG_FILES get distributed automatically.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Looping around LoadExtension() meant that ExtensionModuleList was reallocated
on every extension. Using LoadExtensionList() we pass an array thus the
function can do the reallocation in one go, and then loop and setup the
ExtensionModuleList.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
v2: Update ephyr [Keith Packard]
v3: Eliminate const warnings in LoadExtensionList [Keith Packard]
Signed-off-by: Keith Packard <keithp@keithp.com>
Without these, after commit fdb4ec86c2, it fails to build on Solaris,
with errors of:
xf86Xinput.c: In function 'xf86stat':
xf86Xinput.c:816:5: error: implicit declaration of function 'major' [-Werror=implicit-function-declaration]
xf86Xinput.c:817:5: error: implicit declaration of function 'minor' [-Werror=implicit-function-declaration]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
We need to include xwin-config.h into winmsgwindow.c, so that _XSERVER64 is
defined, so that the layout of ScreenRec type is correct, so that it's privates
can be accessed correctly, so that the WM_GIVEUP message can be sent to the
screen window.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Check that we don't overrun the end of the property data while converting icons
See http://cygwin.com/ml/cygwin-xfree/2013-06/msg00040.html for testcase.
Also, some warning fixes in winXIconToHICON()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove the unused, cygwin-specific handling for ChangeLog, UG and CG buttons in
the About... Dialog. The buttons themselves were removed in commmit
34269a90ea.
Also remove those window control IDs which are now obsolete.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
In multiwindow mode the modal moving/resizing of windows causes a lot of redraw
events to be sent to the X clients after the user releases the mouse button.
During the moving/resizing client windows are not redrawn as long as the mouse
button is pressed, but all redraw/resizing events are queued and executed step
after step after the moving/resizing ends.
Some clients collect and combine multiple redraw or resizing events, other
clients (e.g. xterm) simply execute each redraw or sizing event.
The enclosed patch minimizes the events for clients to only one event after the
user releases the mouse button to end the moving/resizing. This improves the
user experience and reduces strange screen flickerings, especially on slow
platforms.
The enclosed patch modifies winmultiwindowwndproc.c such that the windows events
WM_ENTERSIZEMOVE and WM_EXITSIZEMOVE that are sent by Windows when the modal
window resizing/moving begins or ends are considered. Only after WM_EXITSIZEMOVE
is the redraw/resizing executed.
Signed-off-by: Oliver Schmidt <oschmidt-mailinglists@gmx.de>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Enhance GetWindowName() so it appends the result of XGetWMClientMachine() when
it is available and useful to do so
Add -hostintitle option to control this behaviour. Add documentation for this
option to man page and -help text.
Also, fix warning in UpdateName()
v2: Provide a HOST_NAME_MAX definition for MinGW
v3: Use '@host' rather than ' (on host)'. Don't add host if it's already in the
title.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winMWExtWMUpdateIcon() was removed in commit 527cf13135
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Use AllocDevicePair() rather than allocating Windows keyboard and pointer
devices individually.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
For clarity, use boolean AND rather than bitwise AND in
WIN_POLLING_MOUSE_TIMER_ID processing.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix const discarded warning in winGenerateAuthorization() in !XCSECURITY case
In function ‘winGenerateAuthorization’:
hw/xwin/winauth.c:123:38: warning: passing argument 2 of ‘GenerateAuthorization’ discards ‘const’ qualifier from pointer target type [enabled by default]
hw/xwin/winauth.c:99:1: note: expected ‘char *’ but argument is of type ‘const char *’
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This hasn't actually been a problem, since the server hasn't allocated
any glyphs before our glyph private initialization during
CreateScreenResources. But it's generally not X Server style to do
things this way.
Now that glamor itself drives both parts of glyphs setup, DDX drivers
no longer need to tell glamor to initialize glyphs. We do retain the
old public symbol so they can keep running with no changes.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Fixes misrendering with cairogears. I had noticed the failure while
trying to figure out what was going on with traps. Cairogears was
apparently putting its results on the screen through putimage, which
is a texture upload, so the last GL drawing was done to the size of
the cairogears window, not the size of the xephyr screen.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
So that the fd in use test in systemd_logind_release_fd works properly.
Note we cannot change the test inside systemd_logind_release_fd as it must
work for devices which were never added to the xf86InputDevs too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
InputDevices may share a single device-node, this happens ie with Wacom
tablets.
This patch makes take_fd and release_fd properly deal with this, together
with the earlier patch for updating the fd in all matching xf86InputDevs
on pause / resume this completes support for such shared device-nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
And use it where appropriate.
Setting the fd for all matching InputDevices is necessary when we've
multiple InputDevices sharing a single device-node, such as happens with
Wacom tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a preparation patch for adding support for server managed fds
for InputDevices where multiple input devices share the same device node (and
thus also their major and minor).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Modify systemd_logind_find_info_ptr_by_devnum to take a start argument, so
that it can be used to find all occurences of a devnum in an InputInfo list,
rather then just the first.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that there are more callers but those were already not doing any
error checking.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
config_odev* functions are called in code-paths were we already use
XNF* functions in other places, so which are not oom safe already.
Besides that oom is something which should simply never happen, so aborting
when it does is as good a response as any other.
While switching to XNF functions also fixup an unchecked strdup case.
Note the function prototypes are kept unchanged, as they are part of the
server ABI.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With the recent systemd-logind changes it is possible to install the Xorg
binary without suid root rights and still have everything working as it
should *if* the user only has cards which are supported by kms.
This commit adds a little suid root wrapper, which is a bit weird, first we
strip the suid-root bit of the Xorg binary, and then we add a wrapper ?
The function of this wrapper is to see if a system still needs root-rights,
if it does not (it supports kms and the kms drivers are properly loaded),
then it will immediately drop all elevated rights before executing the real
Xorg binary. If it finds (some) cards which don't support kms, or no cards
at all, then it will execute the Xorg server with elevated rights so that
ie the nvidia binary driver and the vesa driver can keep working normally.
To make it possible for security concious users who don't need the root
rights to completely remove the wrapper, Xorg is started in a 3 step process
when the wrapper is enabled during build time:
1) A simple shell script which checks if the wrapper is there, if it is
it executes the wrapper, if not it directly executes the real Xorg binary
2) The wrapper gets executed, does its checks, normally drops all elevated
rights and then executes the real Xorg binary
3) The real Xorg binary does its thing
This allows distributions to put the wrapper binary in a separate package, and
will allow users to remove this package. IE the plan with Fedora is to make
"legacy" drivers depend on the wrapper pkg, and since our default install
contains some legacy drivers it will be part of the default install, but
users can later yum remove it (which will also automatically remove the
legacy driver packages as those won't work without it anyways).
The wrapper is loosely modelled after the existing Debian Xwrapper, it
uses the same config-file + config-file format, and also allows restricting
Xserver execution (through the wrapper) to console users only.
There also is a new needs_root_rights config file directive, which can
be used to override the auto-detection the wrapper does.
Hopefully this will allow Debian to replace their own wrapper with this
upstream one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Only devices from the config backend have their attributes set, devices from
the xorg.conf only have Option "Device". That option is also set by the
config backend, so use it.
And since the config backend sets our major/minor but xorg.conf devices don't
have that set, make sure we try to stat it first where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This makes how we handle video drivers identical to what we do for input
drivers, and this should make live easier for old non kms drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
And use it from xf86platformAddDevice too, instead of directly calling
drvp->platformProbe.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
If there is only a single non kms video device (tested with the vesa driver),
then we will never get a resume signal for a drm node, so also call vtenter
when we get a resume for an input device.
Notes:
1) vtenter checks if it is ok to do the vtenter, so if there are kms video
devices the calls for input device resumes are a nop
2) This assumes that there will always be at least one server event fd
supporting input device. Since all non legacy input-drivers will be patched
to supported server fds this seems a safe assumption.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
It broke after commit 9fe052d90c
"xephyr: Build support for rendering with glamor using a -glamor
option."
See http://tinderbox.x.org/builds/2014-03-07-0004/logs/xserver/#build
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The render-nodes case is untested.
v2: Add a flag for wayland to suppress the native DRI3 support.
Wayland isn't running as a master itself, so it can't do the auth
on its own and has to ask the compositor to do it for us. Dropped
XXX about randr provider -- the conclusion from discussion with
keithp was that if the driver's dri3_open for a provider on a
different screen, that's a core dri3 bug.
v3: Don't put quite so much under GLAMOR_NO_DRI3, and add a comment
explaining what this is about.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Porting this code to be non-xorg-dependent is going to take
significant hacking, so just dump it in the glamoregl module for the
moment, so I can hack on it while regression testing.
v2: Fix compiler warnings by adding #include dix-config.h at the top,
don't try to auto-init (I'll try to fix the xv ABI later).
v3: Fix last minute breakage of having reintroduced xf86ScrnToScreen
(one of the compat macros). Just use the drawable's pScreen instead.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is not exposing the API we want long term, but it should get
existing DDX drivers up and running while we massage the API into
shape.
v2: Use LIBADD instead of LDFLAGS to fix deps on libglamor.la, and use
version 0.5.1 (the point it was forked from the external repo).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is the same thing that Qt ended up doing to get DRI2's event
mangling to happen despite using an XCB event loop.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: Avoid making the Ximage for the screen that we'll never use, and
drive the screen pixmap creation for glamor ourselves.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com>
In multiwindow mode, more closely follow ICCCM section 4.1.7 when setting X
input focus to a window when the native Windows window acquires input focus:
- If InputHint is FALSE, don't use XSetInputFocus()
- If the window supports the WM_TAKE_FOCUS protocol, send a WM_TAKE_FOCUS message
This helps JDK 1.7 clients acquire the focus correctly.
Also, factor out checking client support for a given WM_PROTOCOLS protocol as a
separate function.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove unnecessary casts from malloc/realloc/calloc calls. This is the style
used for the majority of X server code.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Somehow this was left out of commmit f3fad371cc
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Allow the bell to be turned off with X server option '-f 0', or by 'xset b off'.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
A follow up to commits 2d9123fd, 451c5d91 and efe96a17, which changed the
parameter name in the definition from index to i, to fix shadowing index() but
didn't adjust the prototype declaration.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Just generate the WGL wrappers we need, rather than for everything in wgl.xml
This avoids generating a lot of unused wrappers, and also avoids compilation
requiring a wglext.h at least as new as wgl.xml
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
InitOutput.c: In function ‘XwinExtensionInit’:
InitOutput.c:170:9: error: implicit declaration of function ‘glxWinPushNativeProvider’ [-Werror=implicit-function-declaration]
glxWinPushNativeProvider();
^
InitOutput.c:170:9: warning: nested extern declaration of ‘glxWinPushNativeProvider’ [-Wnested-externs]
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Try to get a server managed fd from the Options before trying to open the
device node ourselves.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind we cannot probe input devices while switched away, so
if we're switched away, put the pInfo on a list, and probe everything on
that list on VT-Enter.
This is using an array grown by re-alloc, rather than a xorg_list since
creating a new data-type to store a pInfo + list-entry just for this seems
overkill.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits makes the changes necessary outside of the systemd-logind core
to make the server use systemd-logind managed fds for input devices and drm
nodes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commits add the bulk of the systemd-logind integration code, but does
not hook it up yet other then calling its init and fini functions, which
don't do that much.
Note the configure bits check for udev since systemd-logind use will only be
supported in combination with udev. Besides that it only checks for dbus
since all communication with systemd-logind is happening over dbus, so
no further libs are needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for drm nodes.
This commit adds a fd member to OdevAttributes to store the fd to pass it
along to the driver.
systemd-logind tracks devices by their chardev major + minor numbers, so
also add OdevAttributes to store the major and minor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The OdevAttributes struct should just be a head of the attributes list, and
not contain various unrelated flags. Instead add a flags field to
struct xf86_platform_device and use that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add a couple of new functions for dealing with storing integer values into
OdevAttributes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a config_odev_get_attribute helper, and replace the diy looping over all
the attributes done in various places with calls to this helper.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for input devices.
This commit adds a new capabilities field to the InputDriverRec and a
XI86_DRV_CAP_SERVER_FD flag for drivers to indicate that they support server
managed fds.
This commit adds a new XI86_SERVER_FD flag to indicate to drivers when the
server is managing the fd and they should not open/close it. Note that even
if drivers declare they support server managed fds there is no guarantee they
will actually get them.
Since this changes the input driver ABI, this commit bumps it.
systemd-logind tracks devices by their chardev major + minor numbers, since
we are breaking ABI anyways also add major and minor fields for easy storage /
retrieval of these.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Detaching from our controlling tty makes little sense when it is the same
as the vt we're asked to run on. So automatically assume -keeptty in this case.
This is useful to do because when not running as root the server can only make
various VT related ioctls when it does not detach from the tty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
There is no reason why keeptty cannot be used without root-rights.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
On something like cirrus, start X, then attempt to start a second
X while the first is running, if fbdev is installed it'll fail
hard.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just for consistency, I'm pretty sure the code is generally not happy for
malloc failures anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Any time the colormap is changed, the entire screen needs to be
repainted to match.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
asm/mtrr.h makes this an unsigned long on 32, but a u64 on 64. Cast
it to a long to win.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No const value is ever assigned to it, let's not pretend it's const.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Only Xorg -configure uses a hardcoded value here, so let's not change the rest
of the server for that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The only place this isn't allocated is during Xorg -configure where we just
statically assing "mouse"/"kbd" and the identifiers for it. Everywhere else
it's strdup'd and then free'd already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Allocated in one place, freed in another.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This reverts commit 22592855e9.
What warning was this supposed to fix?
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit f71de60355.
What warnings?
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Just forcing everything to const char* is not helpful, compiler warnings are
supposed to warn about broken code. Forcing everything to const when it
clearly isn't less than ideal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The detailed timings are for a 15.6" display when max image size
correctly reports 13.3".
Signed-off-by: Arun Raghavan <arun@accosted.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Factor this code out into functions so that it can be re-used for the
systemd-logind device pause/resume paths.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Use kernel goto style error handling for xf86VTSwitchAway() failure. This
makes it much easier to read the straight path.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind the dbus-core will be used for more then just config, so
it should be possible to build it even when using a non dbus dependent config
backend.
This patch also removes the config_ prefix from the dbus-core symbols.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Updated patch following Hans de Goede's advice.
If -seat option is passed with a value different from seat0,
X server won't call xf86OpenConsole().
This is needed to avoid any race condition between seat0 and
non-seat0 X servers. If a non-seat0 X server opens a given VT
before a seat0 one which expects to open the same VT, one can
get an inactive systemd-logind graphical session for seat0.
This patch was first tested in a multiseat setup with multiple
video cards and works quite well.
I suppose it can also make things like DontVTSwitch and -sharevts
meaningless for non-seat0 seats, so it may fix bug #69477, too.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=71258https://bugs.freedesktop.org/show_bug.cgi?id=69477 (maybe)
See also: http://lists.x.org/archives/xorg-devel/2013-October/038391.htmlhttps://bugzilla.redhat.com/show_bug.cgi?id=1018196
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Flagged by cppcheck 1.62:
[hw/xfree86/common/xf86Helper.c:220] -> [hw/xfree86/common/xf86Helper.c:231]:
(warning) Possible null pointer dereference: pScrn - otherwise it is
redundant to check it against null.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
These are generated in code which uses sprintf as a convenient way to
construct strings from various pieces.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
It seems the alanyzer can't comprehend dixSetPrivate().
quartz.c:119:12: warning: Potential leak of memory pointed to by 'displayInfo'
return quartzProcs->AddScreen(index, pScreen);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
x-hook.c:96:9: warning: Called function pointer is an uninitalized pointer value
(*fun[i])(arg, data[i]);
^~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
X11Controller.m:938:1: warning: method 'applicationWillTerminate:' could be declared with attribute 'noreturn'
[-Wmissing-noreturn,Semantic Issue]
{
^
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
./darwinfb.h:28:9: warning: '_DARWIN_FB_H' is used as a header guard here, followed by #define of a different macro
[-Wheader-guard,Lexical or Preprocessor Issue]
^~~~~~~~~~~~
./darwinfb.h:29:9: note: '_DARWIN_DB_H' is defined here; did you mean '_DARWIN_FB_H'? [Lexical or Preprocessor Issue]
^~~~~~~~~~~~
_DARWIN_FB_H
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Having this function be static generates a compiler warning.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
I'm not sure why ephyr thinks that ddxUseMsg shouldn't return, but
it's not declared to exit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
CARD32 is not type compatible with uint32_t and ends up generating a
pile of warnings. Fix this by replacing all of the CARD* types with
stdint types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It won't exist until the build is complete, so don't complain about it
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
And fix resulting warnings.
v2: (Adam Jackson) Cast handles through uintptr_t to avoid size change warnings
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
defaultFontPath is now a const char * so that it can be initialized
from a string constant. This patch kludges around that by inserting
suitable casts to eliminate warnings. Fixing this 'correctly' would
involve inserting some new variables and conditionals to use them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This gets the easy warnings, mostly constant string problems.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Make lots of string pointers 'const char' so that we can use constant
strings with them without eliciting warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This avoids compiler warnings when initializing with string constants.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xephyr wants ctrl+shift to grab the window, but that conflicts with
ctrl+alt+shift key combos. Remember the modifier state on key presses and
releases, if mod1 is pressed, we need ctrl, shift and mod1 released
before we allow a shift-ctrl grab activation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of only relying on the Range section, we can do better on
HDMI to find out what is the max dot clock the monitor supports. The
HDMI CEA vendor block adds a TMDS max freq we can use.
This makes X not prune 4k resolutions on HDMI.
v2: Replace X_INFO by X_PROBED in the message that prints the max
TMDS frequency (Chris Wilson)
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
The HDMI CEA vendor specific block has some interesting information,
such as the maximum TMDS dot clock.
v2: Don't parse CEA blocks with invalid offsets, remove spurious
brackets (Chris Wilson)
v3: Fix the looping through the CEA data blocks, it had a typo using the
wrong variable coming from the code it was ported from.
Replace x << 16 + y << 8 + z by x << 16 | y << 8 | z
(Chris Wilson)
v4: Remove the stray ';' at the end of "if (*end == 0)".
(Dominik Behr on IRC)
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
v1: Rewrite by Marc Haesen of the WGL wrapper function generation script to use
Khronos group XML.
v2: Remove -dispatchheader option, since dispatch.h doesn't exist anymore, use
the private glapi interface to construct the GL dispatch table for the native
WGL thunks.
v3:
Rewrite to generate shims for the OpenGL 1.2.1 (GL 1.2 + GL_ARB_imaging
+GL_ARB_multitexture + GL_ARB_texture_compression(?)) functions the server links
directly with rather than libGL.
These shims dispatch to either the mesa GL DLL, or a thunking DLL containing
cdecl-to-stcall wrapper functions for the native GL DLL.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessMouseMotion’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:946:188: error: ‘ephyrCurScreen’ undeclared (first use in this function)
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessButtonPress’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:980:186: error: ‘ephyrCurScreen’ undeclared (first use in this function)
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessButtonRelease’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:1007:186: error: ‘ephyrCurScreen’ undeclared (first use in this function)
Fix ephyr compilation when ./configure'd with --enable-debug after commit
46cf6bf569, some instances of ephyrCurScreen were
not converted to screen->pScreen->myNum.
v2: Don't use a trivial local variable which will be unused when ./configure'd
with --disable-debug
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
CGL doesn't have anything like glXGetProcAddress, and the old code just
called down to dlsym in any case. It's a little mind-warping since
dlopening a framework actually loads multiple dylibs, but that's just
how OSX rolls.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
On UEFI machines you'd prefer fbdev to grab efifb instead of vesa trying
to initialize and failing in a way we can't unwind from. On BIOS
machines this is harmless: either there is an fbdev driver and it'll
probably be more capable, or there's not and vesa will kick in anyway.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
... unless you explicitly disabled it with -bs on the command line, or
with the corresponding thing in xorg.conf.
v2: Drop a bogus hunk from compChangeWindowAttributes [vsyrjala]
v3: s/TRUE/WhenMapped/ [jcristau]
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Since we're using RedirectAutomatic to do this, we don't actually
preserve contents when unmapped.
v2: Don't say WhenMapped if Composite didn't initialize [vsyrjala]
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Would only work on ScreenRec 0, which means it's broken.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Newer Linux kernels support DSI outputs. To be able to identify them
properly, add DSI to the list of output names.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This array isn't used anywhere outside this file, so it can be made
static. While at it, make the array const as well.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
dmxAddExtensions takes an argument to determine if it should just
initialize the DMX extension, or both DMX & GLX, but if GLX wasn't
compiled in, the entire call was #ifdef'ed out, leaving the DMX
extension unavailable.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
(I found an amended version of this patch and applied the difference
here - keithp)
v3: Don't call Xsync before restoring error handler as any errors
generated by XGetImage() should be processed when this call
returns as suggested by Jamey Sharp <jamey@minilop.net>
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Add const to any immutable string pointers.
Rename 'range' to 'prop_range' to avoid redefined warning.
Eliminate some unused return values.
Signed-off-by: Keith Packard <keithp@keithp.com>
With outputless GPUs showing up we crash here if there are not outputs
try and recover with a bit of grace.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since all the inb/outb/etc. use in the X server itself (except for
xf86SlowBcopy) has been replaced by calls to libpciaccess, we no
longer need to pass inline assembly files to replace the gcc inline
assembly from hw/xfree86/common/compiler.h when building Xorg itself.
The .il files are still generated and installed in the SDK for the
benefit of drivers who may use them.
Binary diff of before and after showed that xf86SlowBcopy was the
only function changed across the Xorg binary and all modules built
in the Xserver build, it just calls the outb() function now instead
of having the outb instructions inlined, making it a slightly slower
bcopy.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch fixes cursor jumps when there is a grab on the Xephyr window and
the pointer moves outside the window.
So on two side-by-side 640x480 screens, a coordinate of 0/481
triggers KdCursorOffscreen.
If the delta between two screens is 0, they share the same offset for
that dimension. When searching for the new screen, the loop always rules out
the current screen. So we get to the second screen, trigger the conditions
where dy <= 0 and decide that this new screen is the correct one. The result
is that whenever KdCursorOffScreen is called, the pointer jumps to the other
screen.
Change to check for dy < 0 etc. so that the cursor stays on the same screen if
there is no other screen at the target location.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
A multi-head Xephyr instance has the pointer stuck on one screen
because of bad coordinate calculation. The coordinates passed to
GetPointerEvents are per-screen, so the cursor gets stuck on the left-most
screen by default.
Adjust and mark the events as POINTER_DESKTOP, so the DIX
can adjust them accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If a screen size was specified as WxH, the loop returned early and kdOrigin
was never advanced. Thus, screen->origin was always 0 (or whatever was given
at the -origin commandline flag).
If a screen size was given with a bit depth (WxHxD), kdOrigin would always
advance by the current screen, offsetting the next screen.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When building on Solaris with _XOPEN_SOURCE set to a recent XPG release,
<stdlib.h> and other core headers start including <sys/regset.h>, which
has a bunch of unfortunately named macros such as "CS", "ES", etc. for
x86 & x64 registers which clash with existing variable & struct member
names in Xorg - so #undef these so they don't interfere with our use.
(Yes, have filed a bug against the system headers for exposing these,
but this solves the problem for building on existing releases.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This gets the server to link with xshmfence again, and also ensures
that the miSyncShm code is linked into the server with the reference
from sdksyms.
Signed-off-by: Keith Packard <keithp@keithp.com>
A call to Xrandr SetScreenConfig (for randr 1.1) causes the Xserver to
crash when xf86SetViewport() which does not check if the hardware is
accessible.
Wrap accesses to xf86SetViewport() with if (vtSema) { ... } to avoid that.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When enabling/disabling input handlers in xf86VTSwitch() we treat Input-
and GeneralHandlers equally. The result is that after a VT switch the
masks for EnabledDevices and AllSockets are equal and the distiction
between both types is lost.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
EDID sometimes lies about screen sizes. Since the screen size is used
by clients to determine the DPI a wrong ration will lead to terrible
looking fonts.
Add a sanity check for the h/v ratio cutting off at 2.4. This would
still accept the cinemascope aspect ratio as valid.
Also add message suggesting to add a quirk table entry.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
DMPS calls dixSaveScreens() when turned off but not when turned
on. In most cases this is irrelevant as DPMS is done when a
key is hit in which case dixSaveScreens() will be called to
unblank anyhow. This isn't the case if we use xset (or the
DPMS extension directly) to unblank.
Check screenIsSaved to make sure the state needs to be changed
before calling dixSaveScreens().
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The fb layer of X can't deal with strides that are not a multiple of
4, so when Xephyr allocates its own framebuffer it should make sure to
align it.
This fixes crashes and rendering corruption when Xephyr runs in a
depth that is different from the host X server and its screen size is
not a multiple of 4 / depth. (This is particularly easy to trigger if
you use the -resizeable option).
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the depth of the Xephyr server matches that of the host X server,
Xephyr simply uses the buffer associated with the XImage as its
framebuffer. In this case, it is correct to get the bits_per_pixel and
bytes_per_line values returned from hostx_screen_init() from the XImage.
However, when the depth doesn't match the host, Xephyr uses a private
framebuffer that is periodically copied to the XImage. In this case,
the returned values of bits_per_pixel and bytes_per_line should be
those of the private framebuffer, not those of the XImage.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
After fc3ab84d the pVideo field in DevToConfig[i] is no longer
initialized, so it's always NULL. This causes the duplicate finding
algorithm in the beginning of the function to not work anymore as it
is based on this field.
The symptom of this bug is that X -configure reports
Number of created screens does not match number of detected devices.
Configuration failed.
Server terminated with error (2). Closing log file.
rather than producing a working config file.
This patch fixes that bug by initializing the field before calling
xf86PciConfigureNewDev().
Cc: tvignatti@gmail.com
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Provides both a software implementation using timers and driver hooks
to base everything on vblank intervals.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds DRM compatible fences using futexes.
Uses FD passing to get pixmaps from DRM applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
KdScreenInfo is constructed at server startup time, and not
re-generated at server reset time. Freeing the 'driver' element at
reset time means this information is lost, and the server crashes
pretty quickly afterwards.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Send RRResourceChangeNotify event when provider, output or crtc was created or
destroyed. I.e. when the list of resources returned by RRGetScreenResources and
RRGetProviders changes.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Setting POINTER_SCREEN with a unset valuator mask causes a jump to 0/0. Set
the flags to 0 so we don't generate any motion on a button event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
As of server 1.13, systems with DRM and Udev will have BUS_PLATFORM as
their primary bus type. However, drivers not implementing a
platformProbe function will still create entities of type BUS_PCI. We
need to account for this when checking for the primary entity.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Acked-by: Tormod Volden <debian.tormod@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mesa doesn't ship DRI1 drivers as of 8.0, which is about 18 months and
three releases ago. The main reason to have wanted DRI1 AIGLX was to
get a GLX compositor working, but DRI1's (lack of) memory management API
meant that the cost of a GLX compositor was breaking direct GLX apps,
which isn't a great tradeoff.
Of the DRI1 drivers Mesa has dropped, I believe only mga stands to lose
some functionality here, since it and only it has support for
NV_texture_rectangle. Since that's required for every extant GLX
compositor I know of, I conclude that anybody with a savage, say, would
probably not notice AIGLX going away, since they wouldn't be running a
GLX compositor in the first place.
In the future we'd like to use GL in the server in a more natural way,
as just another EGL client, including in the GLX implementation itself.
Since there's no EGL implemented for DRI1 drivers, this would already
doom AIGLX on DRI1 (short of entirely forking the GLX implementation,
which I'm not enthusiastic about).
v2: Remove DRI1 from AIGLX conditionals in configure.ac [anholt]
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Replaces old use of floatMode attribute with new, extended range of
values in __DRI_ATTRIB_RENDER_TYPE. Also adds new conditions, where the
float modes support requires it. Enables support for not only float
configs, but packed float configs as well.
v2 (idr): Whitespace and formatting fixes. Refactor render type
vs. pbuffer checking to a separate function that includes a quote from
the spec. Re-write commit message. Fix compiler warnings:
glxdricommon.c: In function 'glxConvertConfigs':
glxdricommon.c:212:35: warning: pointer targets in passing argument 3 of 'core->getConfigAttrib' differ in signedness [-Wpointer-sign]
glxdricommon.c:212:35: note: expected 'unsigned int *' but argument is of type 'int *'
glxdricommon.c:230:35: warning: pointer targets in passing argument 3 of 'core->getConfigAttrib' differ in signedness [-Wpointer-sign]
glxdricommon.c:230:35: note: expected 'unsigned int *' but argument is of type 'int *'
Signed-off-by: Daniel Czarnowski <daniel.czarnowski@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The type specified is bits, but the context wants an enum.
v2 (idr): Fix various whitespace and formatting problems. Rename
convFBconfRenderTypeBits2CtxRenderType to
renderTypeBitsToRenderTypeEnum. Re-write commit message.
Signed-off-by: Daniel Czarnowski <daniel.czarnowski@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
pi = ki = 0 here, so not follow them.
Signed-off-by: Strake <strake888@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Two functions in the DMX glxproxy code loop over all the backend
screens, starting at the highest numbered and counting down to
the lowest.
Previously, for each screen, the code would allocate a buffer
large enough to read the reply from the backend, copy that reply
into the buffer, and then if it wasn't the final screen, free it.
Only the buffer from the final screen is used, to pass on to the
client in the reply.
This modifies it to just immediately discard the responses from
the screens as we loop through it, only doing the allocate & copy
work for the one buffer we pass back to the client.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Alex Deucher <aleander.deucher@amd.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=69388
Commit c100211034 (dix: only show the cursor
if a window defines one (#58398)) broke the default cursor behaviour in
Xephyr (unless run with -retro). Restore the default cursor visibility
so that '-retro' or '-host-cursor' are not needed to have a visible
cursor.
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
as of ba387cf21f "ephyr: Use host (HW) cursors
by default." this only applies if -sw-cursor is given on the cmdline.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When DEBUG is enabled Xephyr compilation fails:
ephyrdriext.c:343:133: error: 'is_ok' undeclared (first use in this
function)
EPHYR_LOG("leave. is_ok:%d\n", is_ok);
Just reemove bogus is_ok variable.
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix compilation after commit c3c976f54c "glx:
Remove screen number from __GLXconfig"
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Without the logdir, the xserver will write the content of the log file on the
terminal stating that it cannot be written and will stop.
Refer to https://bugs.freedesktop.org/show_bug.cgi?id=3889
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Still true that we should not use the lower case $(mkdir_p) version.
However, remove the 2005 comment as the MKDIR_P is widely used now.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
It is our duty to uninstall any files and/or directories that we installed
through install-data-local and install-exec-hook.
Currently the X symbolic link to Xorg remains on disk after running
make uninstall.
Note the exception for logdir which is usually shared by other modules.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The former was explicitly designed to execute additional code after the binary
has been installed. The latter can be executed in any order, hence it's
current dependency on install-binPROGRAMS as a workaround.
The CYGWIN libXorg.exe.a target is an installation target rather than
a post-installation one, so it should not be done as a hook. It does not depend
on the Xorg executable being installed.
Automake:
"These hooks are run after all other install rules of the appropriate type,
exec or data, have completed. So, for instance, it is possible to perform
post-installation modifications using an install hook".
"With the -local targets, there is no particular guarantee of execution order;
typically, they are run early, but with parallel make, there is no way
to be sure of that".
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is not a problem on UNIX platforms, but on CYGWIN it creates a broken
link to Xorg rather than a link to Xorg.exe.
From the CYGWIN log on tinderbox, we can see that the executable Xorg.exe is
installed correctly. We can see the command used to create the link:
(cd /jhbuild/install/[...]/install/bin && rm -f X && ln -s Xorg X)
Note that the "relink" makefile target correctly appends $(EXEEXT) to Xorg.
Reviewed-By: Matt Dew <marcoz@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
relmap/absmap is used as a evdev-axis-to-x-axis mapping. ABS_X maps to
axis 0, ABS_Y to 1, etc. skipping over non-existing axes so that the third bit
set in the ABS_* range is axis 2, and so on. This requires us to actually have
enough space to have all the ABS_*/REL_* range.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This has never been filled in with anything meaningful afaict, and you
can't get to it from the client in any event.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
You can only register one drawable on a given damage, so there's no
reason to require the caller to specify the drawable, the damage is
enough. The implementation would do something fairly horrible if you
_did_ pass mismatched drawable and damage, so let's avoid the problem
entirely.
v2: Simplify xf86RotateDestroy even more [anholt]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There's no reason not to, and it simplifies quite a few callers.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The only remaining use was in some debugging code in DMX.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has been listed as deprecated ever since DMX was merged.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No DDX overrode this, and we never actually called through that slot
anyway.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When an Xnest instance is not viewable it will crash when a client in
that instance calls GetImage. This is because the Xnest server will
itself receives a BadMatch error.
This patch ignores the error. The application which has requested the
image will receive garbage - this however is fully legal according
to the specs as obscured areas will always contain garbage if there
isn't some sort of backing store as discussed in
https://bugs.freedesktop.org/show_bug.cgi?id=9488
The applied patch is a version from Dadek Doulik.
v2: Call XSync() before changing error handlers as suggested by
Daniel Stone <daniel@fooishbar.org>.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Xnest variant of ModifyPixmapHeader that creates new Pixmap in parent X
server if it's size is modified from 0x0 to anything bigger.
xnestCreatePixmap doesn't create pixmap in parent X server if it has
dimensions 0x0. If it is later resized and accessed, Xnest will be
aborted with BadDrawable error from parent X server because it will
use XID 0. This happens with ScratchPixmap, for example as used from
XaceCensorImage. Applications using XACE crash Xnest.
Reviewed-by: Adam Jackson <ajax@redhat.com>
I'm getting a error building xorg-server-1.14.1.902 with thelatest snapshot
of gcc-4.8:
input.c:225:43: error: array subscript is above array bounds
[-Werror=array-bounds]
This is because kdNumInputFds can become equal to KD_MAX_INPUT_FDS in
KdRegisterFd(). This means that in KdUnregisterFd(), kdInputFds[j + 1] can
be beyond the end of the array.
Signed-off-by: Chris Clayton <chris2553@googlemail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Like commit ac1a60e7b6, re-add
initialization of GLX after it was accidentally dropped from non-Xorg
servers in 5f5bbbe543.
Signed-off-by: Sebastien Bacher <seb128@ubuntu.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62346
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Given that the window title says "ctrl+shift", having pressing those
keys in that order not ungrab you is fairly mean.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Otherwise when you're doing the ctrl-shift mouse grab thing, you
don't know what state you're in until the next rendering occurs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Unless you're working on the sw cursor rendering code, you surely want
to have real hardware cursors.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Note that EXTRA_DIST was always unnecessary, because automake notices
conditional compile of source files and includes them.
Copyright header is added because git noted that this was a 61%
rewrite.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
I suspect there's more cleanup possible in ephyrHostXVPutImage() by
sticking a bunch of the args in the port priv earlier.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
This obviously wanted a helper function beforehand, but even more so
now that we have XCB.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Now that we have XCB on the server side, we don't need to split these
functions out.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
No more extra event structure to translate between hostx.c and
ephyr.c!
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
We can include xcb bits from the same place as server headers, so
there's no need to hide them any more.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Now that we can include server headers in talking to host X, we don't
need to hide any more.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
v2: Fix trying to include xcb-dri in the non-dri-build case (Noted by
Julien)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Drop obsolete comments about interaction between Xlib code and that
macro, and stop undefining it.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Require new xcb-xf86dri to get fixed GetDrawableInfo.
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Julien Cristau <jcristau@debian.org>
v2: Massive, conflict-filled rebase. I think I resolved everything
right, but this host xv code makes my eyes bleed. Touch-tested XV
after the rebase (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
v2: Rebase on indentation changes, squash in a simpler variant of the
later event compression patch, fix server hang or segfault on
window close by reimplementing the x_io_error_handler in the new
XCB event loop (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
v2: Dropped the hostx_load_keymap changes, now that that function is
gutted (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
This isn't used anywhere.
v2: Rebase to the top of the patch series (anholt)
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Marc Haesen <marha@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winauth.c: In function ‘MitGenerateCookie’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winauth.c:87:5: error: implicit declaration of function ‘MitAddCookie’ [-Werror=implicit-function-declaration]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Remove unneeded forward declaration of winProcessXEventsTimeout(), the actual
definition immediately follows.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Unused since 47c7b6d3e6 "Remove no-longer needed
tricks used to prevent the clipboard client from being killed"
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Fix erroneous use of unsigned long * for lpBits in winXCursorToHCURSOR() which
leads to ARGB cursors being vertically streched on x86_64 by interleaving blank
rows of pixels.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
The BITMAPINFO local only has room for a single RBGQUAD in bmiColors, but we
access two (black and white for a mono-color DIB). Fix by changing to a dynamic
allocation big enough for a BITMAPINFO and a RGBQUAD.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Rewrite winXCursorToHCURSOR() so access to BITMAPINFO bmiColors member doesn't
trigger an -Warray-bounds warning.
Note that the underlying storage is allocated as a BITMAPV4HEADER, so has
sufficent room for the extra RGBQUADs bmiColors after the BITMAPINFO bmiHeader.
wincursor.c: In function 'winSetCursor':
wincursor.c:293:24: error: array subscript is above array bounds [-Werror=array-bounds]
wincursor.c:294:24: error: array subscript is above array bounds [-Werror=array-bounds]
wincursor.c:295:24: error: array subscript is above array bounds [-Werror=array-bounds]
wincursor.c:296:24: error: array subscript is above array bounds [-Werror=array-bounds]
wincursor.c:297:24: error: array subscript is above array bounds [-Werror=array-bounds]
wincursor.c:298:24: error: array subscript is above array bounds [-Werror=array-bounds]
wincursor.c:299:24: error: array subscript is above array bounds [-Werror=array-bounds]
wincursor.c:300:24: error: array subscript is above array bounds [-Werror=array-bounds]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Use the correct size of a HWND on x86_64 in XChangeProperty() and
XGetWindowProperty() calls for the _WINDOWSWM_NATIVE_HWND property.
Signed-off-by: Marc Haesen <marha@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Correct SetupRootMenu(), SetupSysMenu(), HandleCustomWM_INITMENU() and
HandleCustomWM_COMMAND() function signatures which use unsigned long parameters,
where just a specific HWND or HMENU handle type should have been used.
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Move pseudoramiX code to a separate top-level directory. Link Xwin and Xquartz
with libPseudoramiX
I'm not sure moving this to a top-level directory is appropriate, but I'm not
sure where else it fits.
Future work: pseudoramiX can probably be consolidated with the rrxinerama code
(which I think provides fake xinerama data when real XINERAMA is disabled and we
only have one screen)
v2: fix distcheck
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Include pthread.h in winglobals.h to fix build with latest MinGW64 headers
In file included from
winmultiwindowicons.c:47:0:
winglobals.h:92:1: error: unknown type name ‘pthread_mutex_t’
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Fix build with latest MinGW64 headers by wrapping Status type in shlobj.h as well
In file included from InitOutput.c:51:0:
/usr/i686-w64-mingw32/sys-root/mingw/include/shlobj.h:1231:44: error: expected identifier or ‘(’ before ‘int’
/usr/i686-w64-mingw32/sys-root/mingw/include/shlobj.h:1248:44: error: expected identifier or ‘(’ before ‘int’
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
There's no reason to pass the data back out to the caller, since the
caller was dropping it on the floor. The original data is a CARD32,
so no need to mess with weird unsigned longs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
The only cases that lead to !is_ok are already EPHYR_LOG_ERROR, and it
fixes set-but-unused compiler warnings.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
This is unused as of the introduction of a helper in
e7150db535
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
newer automake gets quite noisy about this.
hw/xfree86/ddc/Makefile.am:7: warning:
'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
and many more of these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace hardcoded SVR4 || linux || CSRG_BASED with an autoconf check and
the _POSIX_SAVED_IDS macro.
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This at least mentions AutoAddGPU and hints at when you might
want to disable it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 8f4640bdb9 fixed a bit of a
chicken-and-egg problem by detaching GPU screens when their providers
are destroyed, which happens before CloseScreen is called. However,
this created a new problem: the GPU screen tears down its RandR crtc
objects during CloseScreen and if one of them is active, it tries to
detach the scanout pixmap then. This crashes because
RRCrtcDetachScanoutPixmap tries to get the master screen's screen
pixmap, but crtc->pScreen->current_master is already NULL at that
point.
It doesn't make sense for an unbound GPU screen to still be scanning
out its former master screen's pixmap, so detach them first when the
provider is destroyed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Numerous pieces of debug output cast a pointer to an int and then use a "%08x"
printf format.
Use "%p" format for 64-bit portability.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix a possible crash in winMultiWindowGetClassHint() when an application doesn't
null terminate the WM_CLASS property class name (which is an ICCCM conformance
bug in the application)
(Reported for running the contiki cooja simulator in multiwindow mode, although
it seems that many Java clients may have this problem, see [1])
Based on a patch by Marc Haesen.
v2: Avoid using strnlen() which is missing on MinGW
v3: Align with Xming patch
[1] http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6961123
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Remove obsolete WIN_XEVENTS_SHUTDOWN. This event is never generated.
(I think the idea was to listen for WM_DELETE_WINDOW, but that's not a very
useful thing to do for a hidden window.)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Check for python at configure time when building XWin with AIGLX, it's used to
generate the wrapper code for native GL functions.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Avoid a null dereference of DIB_pixels if CreateDIBSection() fails in
NetWMToWinIconAlpha()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Handle WM_MOUSEHWHEEL tilt wheel messages, similarly to WM_MOUSEWHEEL scroll
wheel messages, to generate X button 6 and 7 presses and releases.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Map extra mouse buttons 1 and 2 to X buttons 8 and 9, as conventional, leaving X
buttons 6 and 7 for tilt wheel.
Also add button labels for buttons 6, 7, 8 and 9 and change btn_labels in from a
dynamic allocation to a fixed one of the required size for all the labels we
use.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove unneeded WM_XBUTTON message defines, they have been provided by w32api
for a long time now.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Change winTranslateKey() to return it's result as it's return value, and change
it's uses as well.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Handle left and right ctrl and shift keys independently
Assume that all modifiers are cleared when all keys are released on focus lost,
as internalKeyState doesn't record which modifier key was pressed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove an extra '\n' from internal client IOError log messages
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
_NET_WM_STATE is ATOM[] not ATOM, a list of window state hints, so check all of
the atoms, not just the first one
See EWMH specifcation, section "Application Window Properties"
v2: Actually use [] on the returned atom data
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Currently, WM_ENDSESSION just calls GiveUp() to set the DE_TERMINATE flag. But
for the X server to exit cleanly, we also need the X server dispatch loop to be
unblocked so it can notice that DE_TERMINATE has been set and exit, removing
it's lock file and any unix domain socket.
It appears that the system will terminate the process when the last UI thread in
that process returns from processing WM_ENDSESSION for the last top-level
window.
Since WM_ENDSESSION appears to sent by the system via SendMessage()
(synchronously) and the wndproc is called to process it in the message thread
for that window (the X server thread), we can't easily terminate the X server
dispatch loop from inside the WM_ENDSESSION message processing.
So, create a messaging window, a hidden, top-level window, with a separate
thread to catch this message, and process it by calling GiveUp() and then
blocking on a mutex until the X server dispatch loop exits.
Also, notice when this is a shutdown cancel WM_ENDSESSION message and take no
action.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
XQuartz already conditionally renames main() as dix_main() so it can provide
it's own main(). This isn't the ideal way of doing this, as it prevents libdix
built this way from being useful with any other DDX.
So instead, always name that function dix_main(), and also provide a stub main()
which just calls dix_main(), which can be overriden in the DDX.
Add a main() to XWin (XQuartz already has one, of course).
It's no longer neccessary to link XWin and XQuartz with libmain.
v2: Remove unneeded stub main hw/xwin/InitOutput.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The peculiar way we handle coordinates results in relative coordinates on
absolute devices being added to the last value, then that value is mapped to
the screen (taking the device dimensions into account). From that mapped
value we get the final coordinates, both screen and device coordinates.
To avoid uneven scaling on relative coordinates, they are pre-scaled by
screen ratio:resolution:device ratio factor before being mapped. This
ensures that a circle drawn on the device is a circle on the screen.
Previously, we used the ratio to scale x up. Synaptics already does its own
scaling based on the resolution and that is done by scaling y down by the
ratio. So we can remove the code from the driver and get approximately the
same behaviour here.
Minor ABI bump, so we can remove this from synaptics.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Emmanuel Benisty <benisty.e@gmail.com>
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Simplifies code and reduces risk of overflow from converting length
field in X replies from words to bytes.
One call to _XEatData is left in ephyrHostGLXGetStringFromServer where
it's already been checked for overflow, and other values have been
subtracted from it to reduce the size of data remaining to be eaten.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reduces risk of overflow from converting length field in X replies
from words to bytes. (Also seems to be what several calls were
already incorrectly passing to _XEatData.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Xlib already provides a function to eat padding bytes after the
data read, so use it instead of calculating it ourselves.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
clientDriverNameLength is a CARD32 and needs to be bounds checked before
adding one to it to come up with the total size to allocate, to avoid
integer overflow leading to underallocation and writing data from the
network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
busIdStringLength is a CARD32 and needs to be bounds checked before adding
one to it to come up with the total size to allocate, to avoid integer
overflow leading to underallocation and writing data from the network past
the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
reply.length & reply.size are CARD32s and need to be bounds checked before
multiplying or adding to come up with the total size to allocate, to avoid
integer overflow leading to underallocation and writing data from the
network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
numFBConfigs & numAttribs are CARD32s and need to be bounds checked before
multiplying by structure sizes to come up with the total size to allocate,
to avoid integer overflow leading to underallocation and writing data from
the network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
numVisuals & numProps are both CARD32 and need to be bounds checked before
multiplying by structure sizes to come up with the total size to allocate,
to avoid integer overflow leading to underallocation and writing data from
the network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
A constant deceleration of x simply means (delta * 1/x). We limited that to
values >= 1.0f for obvious reasons, but can also allow values from 0-1.
That means that ConstantDeceleration is actually a ConstantAcceleration, but
hey, if someone needs it...
X.Org Bug 66134 <http://bugs.freedesktop.org/show_bug.cgi?id=66134>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
* __FreeBSD_kernel_version doesn't exist anymore
* The removed check was for FreeBSD versions from before September 2000
which are no longer supported anyway
* Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66045
Signed-off-by: François Tigeot <ftigeot@wolfpond.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This reverts commit 3209b094a3. After a
long debug session by Paul Berry, it appears that this was the commit
that has been producing sporadic failures in piglit front buffer
rendering tests for the last several years.
GetBuffers may return fresh buffers with invalid contents at a couple
reasonable times:
- When first asked for a non-fake-front buffer.
- When the drawable size is changed, an Invalidate has been sent, and
obviously the app needs to redraw the whole buffer.
- After a glXSwapBuffers(), GL allows the backbuffer to be undefined,
and an Invalidate was sent to tell the GL that it should grab these
appropriate new buffers to avoid stalling.
But with the patch being reverted, GetBuffers would also return fresh
invalid buffers when the drawable serial number changed, which is
approximately "whenever, for any reason". The app is not expecting
invalid buffer contents "whenever", nor is it valid. Because the GL
usually only GetBuffers after an Invalidate is sent, and the new
buffer allocation only happened during a GetBuffers, most apps saw no
problems. But apps that do (fake-)frontbuffer rendering do frequently
ask the server for the front buffer (since we drop the fake front
allocation when we're not doing front buffer rendering), and if the
drawable serial got bumped midway through a draw, the server would
pointlessly ditch the front *and* backbuffer full of important
drawing, resulting in bad rendering.
The patch was originally to fix bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=28365
Specifically:
To reproduce, start with a large-ish display (i.e. 1680x1050 on my
laptop), use the patched glxgears from bug 28252 to add the
-override option. Then run glxgears -override -geometry 640x480
to create a 640x480 window in the top left corner, which will work
fine. Next, run xrandr -s 640x480 and watch the fireworks.
I've tested with an override-redirect glxgears, both with vblank sync
enabled and disabled, both with gnome-shell and no window manager at
all, before and after this patch. The only problem observed was that
before and after the revert, sometimes when alt-tabbing to kill my
gears after completing the test gnome-shell would get confused about
override-redirectness of the glxgears window (according to a log
message) and apparently not bother doing any further compositing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
When SDL called this it was totally broken, actually hook
up to the underlying drmmode function.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64808
Thanks to Peter Wu <lekensteyn@gmail.com> for harassing me.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Update manifest to target all architectures, not just x86
Also: Write explicit dependencies for Xwin.rc. XWin.exe.manifest and X.ico are
included the resource compiler output, so add a dependency on them to cause it
to be recompiled if they change.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Win32 Windows properties are of pointer type HANDLE, not an integer type, but we
use the Windows property WINDOW_WID_PROP to store the X window XID.
Add appropriate casts to show it doesn't matter that an XID is smaller than a
pointer on 64-bit build.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winMultiWindowGetTransientFor() accesses the WM_TRANSIENT_FOR property, which is
an X window XID (which we compare with WINDOW_WID_PROP) and not a WindowPtr.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Change winIconIsOverride() to take a HICON parameter, so some unneccessary
casts, which weren't portable to 64-bit Cygwin, can be removed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix uses of CreateDialogParam() to be more strictly correct, for 64-bit builds
dwInitParam parameter is LPARAM, not int
Return type of DLGPROC is INT_PTR, not WINBOOL
Also: Reporting the value of g_hDlgDepthChange is completely uninteresting, we
are just interested in GetLastError() if it is NULL
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The deprecated interface cygwin_conv_to_win32_path() doesn't exist in 64-bit
cygwin, but both the ID_ABOUT_CHANGELOG control and the referenced file who's
path we are converting haven't existed for a while, so just remove this unused,
cygwin-specific code.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix a 64-bit portability issue with casting HINSTANCE result of ShellExecute()
to an integer: Since HINSTANCE is a pointer type, use INT_PTR rather than int.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no point in turning on outputs connected to GPU screens during initial
configuration. Not only does this cause them to just display black, it also
confuses clients when these screens are attached to a master screen and RandR
reports that the outputs are already on.
Also, don't print the warning about no outputs being found on GPU screens,
since that's expected.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
/jhbuild/checkout/xorg/xserver/hw/xwin/winwindowswm.c: In function ‘ProcWindowsWMFrameGetRect’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winwindowswm.c:322:12: error: variable ‘ir’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winwin32rootlesswindow.c: In function ‘winMWExtWMUpdateWindowDecoration’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winwin32rootlesswindow.c:189:11: error: variable ‘dwStyle’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winpfbdd.c: In function ‘winHotKeyAltTabPrimaryDD’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winpfbdd.c:518:20: error: variable ‘rcSrc’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winmultiwindowwindow.c: In function ‘winMinimizeWindow’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winmultiwindowwindow.c:813:20: error: variable ‘pScreenInfo’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winclipboardthread.c: In function ‘winClipboardProc’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winclipboardthread.c:88:25: error: variable ‘atomClipboardManager’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winwndproc.c: In function ‘winWindowProc’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winwndproc.c:65:22: error: variable ‘s_hInstance’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winwindow.c: In function ‘winCopyWindowNativeGDI’:
/jhbuild/checkout/xorg/xserver/hw/xwin/winwindow.c:131:15: error: variable ‘pwinRoot’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winscrinit.c:264:11: error: variable ‘pbits’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/winkeybd.c:331:17: error: variable ‘lastMessage’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
/jhbuild/checkout/xorg/xserver/hw/xwin/windialogs.c: In function ‘winChangeDepthDlgProc’:
/jhbuild/checkout/xorg/xserver/hw/xwin/windialogs.c:432:22: error: variable ‘s_pScreen’ set but not used [-Werror=unused-but-set-variable]
/jhbuild/checkout/xorg/xserver/hw/xwin/windialogs.c: In function ‘winAboutDlgProc’:
/jhbuild/checkout/xorg/xserver/hw/xwin/windialogs.c:564:22: error: variable ‘s_pScreen’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
I didn't think we needed this before, but after doing some more
work with reverse optimus it seems like it should be called.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
scrn->display is a property of the main screen really, and we don't
want to have the GPU screens use it for anything when picking modes
or a front buffer size.
This fixes a bug where when you plugged a display link device, it
would try and allocate a screen the same size as the current running
one (3360x1050 in this case), which was too big for the device. Avoid
doing this and just pick sizes based on whats plugged into this device.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When we disconnect an output/offload slave set the changed bits,
so a later TellChanged can do something.
Then when we remove a GPU slave device, sent change notification
to the protocol screen.
This allows hot unplugged USB devices to disappear in clients.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6703a7c7cf
Author: Keith Packard <keithp@keithp.com>
Date: Tue Jan 8 20:24:32 2013 -0800
hw/xfree86: Require only one working CRTC to start the server.
changed the logic to try to set the mode on all connected outputs rather
than abort upon the first failure. The return error code was then
tweaked such that it reported success if it set a mode on any crtc.
However, this confuses the headless case where we never enable any crtcs
and also, importantly, never fail to set a crtc.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59190
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Also-written-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes build on non-udev systems, since XSERVER_PLATFORM_BUS is only
defined in configure.ac if $CONFIG_UDEV_KMS is true.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add support for Amiga-style bitplanes, with 4 or 8 bits per pixel.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Keith Packard <keithp@keithp.com>
Add support for Atari-style interleaved bitplanes, with 2 bytes interleave
and 4 or 8 bits per pixel.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
miCreateDefColormap() only preallocates black and white pixels if
depth > 1.
Hence override the visual, so fbdevCreateColormap() takes care of it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Monochrome supports StaticGray, with hardcoded black and white pixels.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Older frame buffer devices may not fill in fix.line_length, in which
case it must be calculated by the application.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>