This is a specialization of ms_drm_abort that matches based on the drm
event queue's sequence number.
Based on code by Keith Packard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
I want to use this in present.c.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, ms_flush_drm_events() returned a boolean value, and it was
very easy to interpret the meaning incorrectly. Now, we return an
integer value.
The possible outcomes of this call are:
- poll() raised an error (formerly TRUE, now -1 - poll's return value)
- poll() said there are no events (formerly TRUE, now 0).
- drmHandleEvent() raised an error (formerly FALSE, now the negative
value returned by drmHandleEvent).
- An event was successfully handled (formerly TRUE, now 1).
The nice part is that this allows you to distinguish errors (< 0),
nothing to do (= 0), and success (1). We no longer conflate errors
with success.
v2: Change ms_present_queue_vblank to < 0 instead of <= 0, fixing an
unintentional behavior change. libdrm may return EBUSY if it's
received EINTR for more than a second straight; just keep retrying
in that case. Suggested by Jasper St. Pierre.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This adds support for reverse prime to the modesetting driver.
Reverse prime is where we have two GPUs in the display chain,
but the second GPU can't scanout from the shared pixmap, so needs
an extra copy to the on screen pixmap.
This allows modesetting to support this scenario while still
supporting the USB offload one.
v1.1:
fix comment + ret = bits (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rather than create the pixmap, this uses the file descriptor
to change an existing pixmaps backing store.
This is required for reverse prime slaves, where we create
the slave pixmap, then set the backing store.
v1.1: use local pScreen (Eric)
Reviewed-by: Eric Anholt <eric@annholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows a glamor enabled master device to have
slave USB devices attached.
Tested with modesetting on SNB + USB.
It relies on the previous patch to export linear
buffers from glamor.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need this for doing USB offload scenarios using glamor
and modesetting driver.
unfortunately only gbm in mesa 10.6 has support for the
linear API.
v1.1: fix bad define
v2: update the configure.ac test as per amdgpu. (Michel)
set linear bos to external to avoid cache. (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel pointed out I broke Zaphod with the initial auto add
gpu devices change,
Fix this, by only auto adding GPU devices if we are screen 0
and there are no other screens in the layout. Anyone who
wants to assign GPU devices can specify it in the xorg.conf
for this use case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
XRender defines this, GL really doesn't like it.
kwin 4.x and qt 4.x seem to make this happen for the
gradient in the titlebar, and on radeonsi/r600 hw
this draws all kinds of wrong.
v2: bump this up a level, and check it earlier.
(I assume the XXXX was for this case.)
v3: add same code to largepixmap paths (Keith)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In some extreme cases with animated cursors at a high frame rate we
could end up filling the wl_display outgoing buffer and end up with
wl_display_flush() failing.
In any case, using the frame callback to throttle ourselves is the
right thing to do.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As we unflip after the flip Window no longer passes the pixel ownership
test for the full Screen Pixmap, we can no longer utilize that Window to
copy the contents back to the backing pixmap. To first flip means that
the Window was originally backed by the Screen Pixmap and wholly covered
the Pixmap, thus we need to copy the last frame contents to the Screen
Pixmap when the flip chain is complete.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
backtrace.c uses a word size provided by libunwind. In some
architectures like MIPS, libunwind makes that word size 64-bit for all
variants of the architecture.
In the lines #90 and #98, backtrace.c tries to do a cast to a pointer,
which fails in all MIPS variants with 32-bit pointers, like MIPS32 or
MIPS64 n32, because it's trying to do a cast from a 64-bit wide variable
to a 32-bit pointer:
Making all in os
make[2]: Entering directory
`/home/test/test/1/output/build/xserver_xorg-server-1.15.1/os'
CC WaitFor.lo
CC access.lo
CC auth.lo
CC backtrace.lo
backtrace.c: In function 'xorg_backtrace':
backtrace.c:90:20: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
if (dladdr((void *)(pip.start_ip + off), &dlinfo) &&
dlinfo.dli_fname &&
^
backtrace.c:98:13: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
(void *)(pip.start_ip + off));
^
cc1: some warnings being treated as errors
make[2]: *** [backtrace.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
Making the cast to a pointer-sized integer, and then to a pointer fixes
the problem.
Related:
https://bugs.freedesktop.org/show_bug.cgi?id=79939
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Right now if "-auth" isn't passed on the command line, we let
any user on the system connect to the Xwayland server.
That's clearly suboptimal, given Xwayland is generally designed
to be used by one user at a time.
This commit changes the behavior, so only the user who started the
X server can connect clients to it.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the X server is started without a '-auth' argument, then
it gets started wide open to all local users on the system.
This isn't a great default access model, but changing it in
Xorg at this point would break backward compatibility.
Xwayland, on the other hand is new, and much more targeted
in scope. It could, in theory, be changed to allow the much
more secure default of a "user who started X server can connect
clients to that server."
This commit paves the way for that change, by adding a mechanism
for DDXs to opt-in to that behavior. They merely need to call
LocalAccessScopeUser()
in their init functions.
A subsequent commit will add that call for Xwayland.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xwayland currently allows wide-open access to the X sockets
it listens on, ignoring Xauth access control.
This commit makes sure to enable access control on the sockets,
so one user can't snoop on another user's X-over-wayland
applications.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If present, access the unaccelerated valuator mask values for DGA and XI2 raw
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Now that we have two likely drivers that fight for control over the input
devices (evdev and libinput) let's move the respective driver assignment to
each package. So you get what you install.
https://bugs.freedesktop.org/show_bug.cgi?id=89023
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit d61ae18074.
If the DRI2 provider is disabled, then we don't advertise the correct
GLX extensions to clients, and things like GLES fail.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90442
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
New composite glyphs code uses the updated glamor program
infrastructure to create efficient shaders for drawing render text.
Glyphs are cached in two atlases (one 8-bit, one 32-bit) in a simple
linear fashion. When the atlas fills, it is discarded and a new one
constructed.
v2: Eric Anholt changed the non-GLSL 130 path to use quads instead of
two triangles for a significant performance improvement on hardware
with quads. Someone can fix the GLES quads emulation if they want to
make it faster there.
v3: Eric found more dead code to delete
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This extends the existing API to support options needed for render
accleration, including an additional fragment, 'combine', (which
provides a place to perform the source IN mask operation before the
final OP dest state) and an additional 'defines' parameter which
provides a way to add target-dependent values without using a uniform.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Use code from Piglit project to compute GLSL version for either GL or
GLES. The Piglit code was originally written by Chad Versace.
v2: bail if the parse fails (requested by Eric Anholt)
v3: Use version 1.20 for GLES until we fix our programs (Eric Anholt)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead of passing the destination drawable, just pass the depth, as
the underlying functions need only that to check whether the planemask
is going to work.
This API change will allow higher level functions to not need the
destination pixmap.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The image is created in the native byte order of the machine Xephyr is
rendered on however drawn in the image byte order of the Xephyr server.
Correct byte order in the xcb_image_t structure and convert to native
before updating the window.
If depths of Xephyr and host server differ this is already taken care of
by the depth conversion routine.
It is a terrible wase to always convert and transmit the entire image
no matter of the size of the damaged area. One should probably use
sub-images here. For now we leave this as an exercise.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xcb_image_put() prints the entire image, therefore don't use an offset.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The DDX specific command line parsing function only gets called
if command line arguments are present. Therefore this function
is not suitable to initialize mandatory global variables.
Replace main() instead.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes a build error with gcc 4.2.1 on OpenBSD due to
-Werror=return-type from xorg-macros.
error: type qualifiers ignored on function return type
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes mmap failures with 32-bit builds.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Without this, AC_SYS_LARGEFILE doesn't actually have any effect.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix missing newlines from error string and fix grammar.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The code in drmmode_set_cursor does not properly handle the case where
drmModeSetCursor2 returns any other error than EINVAL and silently fails to set
a cursor.
So only return when the drmModeSetCursor2 succeeds (i.e returns 0) and disable
the cursor2 usage on EINVAL.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1205725
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't even need to simulate button clicks; it's done automatically.
This also fixes scrolling in Qt5 apps.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If a device does not have any valuators, it makes no sense to set the
device transformation. Return a BadMatch error to let the caller know
that they're trying something stupid.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The refactoring in commit efc1035ca9
removed the actual update of currentTime.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is necessary to avoid a NULL pointer deference when the pixmap is
used later.
[ajax: massaged commit message, fixed it to compile]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89748
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Brent Collins <bcollins@trustedcs.com>
We pass the pPixmap->drawable.id to the ShmDetachSegment function after
the pPixmap is freed. Fortunately, we don't use the value inside
ShmDetachSegment and can simply pass zero instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
