If the compositor has no support for the Xwayland keyboard grab
protocol, there is no need to set-up our keyboard grab handler.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Left over from the following commits:
8465ee788f xwin: Remove native GDI engine (v2)
c79f824bf6 xwin: Remove primary DirectDraw engine
v2: drop leading - in the makefile
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk> (v1)
The function itself does not depend on the macro. Move it outside
of the ifdef guard and remove the identical copy in XWIN.
This is step 1 towards removing the duplication in winauth.c and moving
the OS specifics to os/
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
All the relevant code already uses the ::base::glx_enable_bits one.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
Those are xlib spellings, we say TRUE/FALSE pretty consistently
elsewhere in the server.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The version detect was erroring out with 1.9 protos installed, and we
weren't building the new code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The keyboard grabbing protocol for Xwayland is included in
wayland-protocol 1.9.
Update the wayland-protocol required version in both configure and meson
builds and add support for this new protocol in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There were two bugs here: The comparison function was not stable when
one or more of the drivers being compared is a fallback, and the last
driver in the list would never be moved.
Signed-off-by: Adam Jackson <ajax@redhat.com>
libdrm's busid matching for the legacy three-integer bus string format
simply ignores the domain number, rather than what we were doing here of
packing the domain into the bus number. Whatever, just use the existing
code to build a busid string, since that gets the domain right.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Works around <rdar://problem/7150340>.
Tested-by: Martin Otte <martinjotte@gmail.com>
Tested-by: Tom Lane <tgl@sss.pgh.pa.us>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Copied from Mesa with no modifications.
Gives us Coffee Lake and Cannon Lake PCI IDs.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
... where it is named src/egl/wayland/wayland-drm/wayland-drm.xml and
has its requests sorted by protocol version number, avoiding a warning
from wayland-scanner.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We had a bug reported with a touchscreen where we could end up
in here with a NULL cursor, so let's not crash the X server.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-and-Tested-by: Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86str.h is parsed into sdksyms unconditionally but the symbol is only
defined when building with PCI support. Move the decl to a header that
sdksyms only parses when building PCI support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
gcc/glibc think the snprintf in dmxExecOS() might truncate. Yes, it
might, and we also don't care. Just delete all this.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
Modern glibc is very insistent that you care about whether write()
succeeds:
../hw/dmx/input/usb-keyboard.c: In function ‘kbdUSBCtrl’:
../hw/dmx/input/usb-keyboard.c:292:9: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
write(priv->fd, &event, sizeof(event));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This symbol is used by some DRI2+ drivers and there's nothing
DRI1-specific about it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
This appears to be essentially unused. The only known client-side
library for the SELinux extension is xcb, which does not look for the
name "Flask". The "SGI-GLX" alias for GLX appears to be a bit of
superstition at this point, NVIDIA's driver does not expose it and Mesa
does not check for it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
It was attempting to use the <bus>@<domain> format accepted by the BusID
stanza, but the two values were swapped.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The PCI domain has to be specified like this:
"PCI:<bus>@<domain>:<device>:<function>"
Example before:
(--) PCI:*(0:0:1:0) 1002:130f:1043:85cb [...]
(--) PCI: (0:1:0:0) 1002:6939:1458:229d [...]
after:
(--) PCI:*(0@0:1:0) 1002:130f:1043:85cb [...]
(--) PCI: (1@0:0:0) 1002:6939:1458:229d [...]
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Don't build BSD ossupport when there is no specific support, build stubs
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Our top-level glx.h include already provides all of the tokens we use,
and fixes redefinition warnings in the meson build.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The client could have said anything here, and if what they said doesn't
actually name an atom NameForAtom() will return NULL, and strcmp() will
be unhappy about that.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The 'tablet_tool_wheel' function for tablet scrolling was added back in
8a1defcc63 but left unimplemented. This commit fills in the necessary
details, using the "clicks" count as the number of discrete scroll up/down
events to send.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The 'tablet_tool_frame' function treats the button masks as though they
are zero-indexed, but 'tablet_tool_button_state' treats them as one-
indexed. The result is that an e.g. middle click event recieved from
Wayland will be sent from the X server as a right-click instead.
Fixes: 773b04748d ("xwayland: handle button events after motion events")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland doesn't override these, so we don't need defining those
in the xwl_screen struct.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the typical pattern in games of "hide cursor, grab with a confineTo,
warp constantly the pointer to the middle of the window" the last warping
step is actually rather optional. Some games may choose to just set up a
grab with confineTo argument, and trust that they'll get correct relative
X/Y axis values despite the hidden cursor hitting the confinement window
edge.
To cater for these cases, lock the pointer whenever there is a pointer
confinement and the cursor is hidden. This ensures the pointer position
is in sync with the compositor's when it's next shown again, and more
importantly resorts to the relative pointer for event delivery.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes grabs on InputOnly windows whose parent is the root window
failing with GrabNotViewable. This is due to window->borderSize/windowSize
being computed as clipped by its parent, resulting in a null region.
Setting up the right size on the root window makes the InputOnly size
correct too, so the GrabNotViewable paths aren't hit anymore.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Of sorts, actually make it confine to the pointer focus, as the
InputOnly window is entirely invisible to xwayland accounting,
we don't have a xwl_window for it.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Of sorts, as we can't honor pointer warping across the whole root window
coordinates, peek the pointer focus in these cases.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the default behaviour was changed from clone mode to horizontal
extended layout, a boolean ScrnInfoRec member preferClone was introduced
to choose the old default behaviour. Option "PreferCloneMode" allows
setting this preferClone member.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
All that was left here was updating the FBO's size. However, the FBO
size was always set correctly already through
glamor_set_pixmap_texture() from whoever had attached a new BO to the
pixmap.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This needs a meson with PRs #1784, #1792 and #1794
Future work: remove conditionals which are always on, and simplify redundant
CYGDEBUG conditionals
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Don't unconditionally include rootless.h, and so we don't need to add
rootless to the include path unless building MWEXTWM.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
When running an Xwayland server from the command line, we end up
resetting the server every time all of the clients connected to the
server leave. This would be fine, except that xwayland makes the mistake
of unconditionally calling LoadExtensionList(). This causes us to setup
the glxExtension twice in a row which means that when we lose our last
client on the second server generation, we end up trying to call the glx
destructors twice in a row resulting in a segfault:
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x70845bf]
(EE) 2: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x32897d) [0x1196e5bd]
(EE) 3: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x328a45) [0x1196e745]
(EE) 4: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x32665f) [0x11969f7f]
(EE) 5: Xwayland (__glXDRIscreenDestroy+0x30) [0x54686e]
(EE) 6: Xwayland (glxCloseScreen+0x3f) [0x5473db]
(EE) 7: Xwayland (glxCloseScreen+0x53) [0x5473ef]
(EE) 8: Xwayland (dix_main+0x7b6) [0x44c8c9]
(EE) 9: Xwayland (main+0x28) [0x61c503]
(EE) 10: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x72b1401]
(EE) 11: Xwayland (_start+0x2a) [0x4208fa]
(EE) 12: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x18
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Easy reproduction recipe:
- Start an Xwayland session with the default settings
- Open a window
- Close that window
- Open another window
- Close that window
- Total annihilation occurs
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit aa6717ce2 switched xf86WaitForInput from using select(2) to using
poll(2). Before this change, the timeout was interpreted as being in
microseconds; afterwards it is fed directly to xorg_poll which interprets
it as being in milliseconds. This results in the function potentially
blocking 1000x longer than intended. This commit scales down the timeout
argument before passing it to xorg_poll, being careful to ensure the result
is not rounded down due to integer division.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
./hw/xfree86/common/xf86pciBus.c: In function ‘xf86MatchDriverFromFiles’:
../hw/xfree86/common/xf86pciBus.c:1330:52: warning: ‘snprintf’ output may be
truncated before the last format character [-Wformat-truncation=]
snprintf(path_name, sizeof(path_name), "%s/%s", ^~~~~~~
../hw/xfree86/common/xf86pciBus.c:1330:13: note: ‘snprintf’ output between 2
dirent->d_name is 256, so sprintf("%s/%s") into a 256 buffer gives us:
and 257 bytes into a destination of size 256
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The glamor_egl module that the GLAMOR paths are using is only built if
GLAMOR_HAS_GBM is true, and there's no plan for implementing the
module without GBM. Simplify modesetting's code as a result.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
../hw/xwin/winmultiwindowwm.c:188:1: warning: ‘MessageName’ defined but not used [-Wunused-function]
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
../hw/xwin/winshadgdi.c: In function ‘winCloseScreenShadowGDI’:
../hw/xwin/winshadgdi.c:632:12: warning: ‘fReturn’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winshadgdi.c:579:10: note: ‘fReturn’ was declared here
../hw/xwin/winshadddnl.c: In function ‘winCloseScreenShadowDDNL’:
../hw/xwin/winshadddnl.c:711:12: warning: ‘fReturn’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winshadddnl.c:661:10: note: ‘fReturn’ was declared here
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This is possibly an actual bug in failing to check we successfully retrieved
the monitor size before using it to set the X screen size.
../hw/xwin/winwndproc.c: In function ‘winWindowProc’:
../hw/xwin/winwndproc.c:283:55: warning: ‘dwHeight’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winwndproc.c:240:32: note: ‘dwHeight’ was declared here
../hw/xwin/winwndproc.c:281:54: warning: ‘dwWidth’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winwndproc.c:240:23: note: ‘dwWidth’ was declared here
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Because we can use a shared lib in dlsym() for the symbol loader test,
but we can't use the executable.
v2: Drop a stray ' ' and rebase on 820a4cbe9f, by anholt
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Whatever problem this is trying to fix, we don't care. Just include the
thing and stop worrying about whether _POSIX_SOURCE is defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
gcc -std=c99 does not define the former, and it's a horrible namespace
confusion anyway.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
I had said:
commit c42311a9d7
Author: Adam Jackson <ajax@redhat.com>
Date: Fri Mar 24 15:58:54 2017 -0400
kdrive: Remove KdOsFuncs
Only the Init slot was used, and Xephyr can just as easily do
that initialization directly.
And I'd've been right, but I forgot to make that initialization only
happen on startup (i.e. when serverGeneration == 1).
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Add options for DRI{1,2,3}
shmfence is required for DRI3
libdrm is required for any DRI{1,2,3}
Consolidate calls to dependency('libdrm')
Set WITH_LIBDRM when building with libdrm
v2:
Initialize libxserver_dri3 to []
Manually flatten libxserver, since meson doesn't (currently)
Use version_compare rather than circumloctions with dependency()
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
v2: Re-commit the patch reverted in
2388f5e583, with Aaron Plattner's
fix squashed in (by anholt).
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v1)
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Eric Anholt <eric@anholt.net>
This reverts commit 112d0d7d01.
It broke Xorg for Adam, Peter, and myself, by failing hard when a
module load failed.
Signed-off-by: Eric Anholt <eric@anholt.net>
I clearly hadn't run ninja test, since fb no longer had any of the fb
symbols in it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In the event that xwayland gets launched on a wayland compositor that
doesn't yet have support for wp_tablet_manager, we end up skipping the
initialization of the lists. This is wrong, because regardless of
whether or not a tablet is present we still attempt to traverse these
lists later in xwl_set_cursor(), expecting that if the lists are empty
from no tablet manager that we simply won't execute any loop iterations.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x7f73722545bf]
(EE) 2: Xwayland (xwl_set_cursor+0x9f) [0x429974]
(EE) 3: Xwayland (miPointerUpdateSprite+0x261) [0x4fe1ca]
(EE) 4: Xwayland (mieqProcessInputEvents+0x239) [0x4f8d33]
(EE) 5: Xwayland (ProcessInputEvents+0x9) [0x4282f0]
(EE) 6: Xwayland (Dispatch+0x42) [0x43e2d4]
(EE) 7: Xwayland (dix_main+0x5c9) [0x44c6dc]
(EE) 8: Xwayland (main+0x28) [0x61c523]
(EE) 9: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x7f7371e9d401]
(EE) 10: Xwayland (_start+0x2a) [0x4208fa]
(EE) 11: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x28
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Reproduced when trying to run upstream xwayland under fedora 25's weston
package.
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Only the Init slot was used, and Xephyr can just as easily do that
initialization directly.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glibc would like to stop declaring major()/minor() macros in
<sys/types.h> because that header gets included absolutely everywhere
and unix device major/minor is perhaps usually not what's expected. Fair
enough. If one includes <sys/sysmacros.h> as well then glibc knows we
meant it and doesn't warn, so do that if it exists.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Building xserver with meson -Db_lto=true found this! Check it:
../hw/dmx/dmx.c:66:22: warning: type of ‘XRT_WINDOW’ does not match
original declaration [-Wlto-type-mismatch]
extern unsigned long XRT_WINDOW;
^
../include/resource.h:58:18: note: type ‘RESTYPE’ should match type ‘long
unsigned int’
typedef uint32_t RESTYPE;
^
../Xext/panoramiX.c:85:9: note: ‘XRT_WINDOW’ was previously declared here
RESTYPE XRT_WINDOW;
^
../Xext/panoramiX.c:85:9: note: code may be misoptimized unless
-fno-strict-aliasing is used
I have never managed successfully to build xserver with LTO with
autotools, so, score one for meson.
Get the decl from panoramiXsrv.h, which includes panoramiX.h first anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
I converted Xorg when meson 0.40 came out, but fumbled my grep and
forgot that I had instances of the .extract_all_objects() workaround
in dixmods, too.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Hooked up a bit differently to the other tools. Those tools can be static for
all and be re-used. The wacom driver initializes the pad with the correct
number of buttons though and we can't do this until we have the pad done event.
If the tablet is removed and we plug a different one in, we should initialize
that correctly, so unlike the other tools the pad is properly removed and
re-initialized on plug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Each xwl_tablet_tool gets a xwl_cursor, as on wayland each of those
will get an independent cursor that can be set through
zwp_tablet_tool.set_cursor.
However, all tools (and the pointer) share conceptually the same VCP
on Xwayland, so have cursor changes trigger a xwl_cursor update on
every tool (and the pointer, again). Maybe Xwayland could keep track
of the most recent device and only update that cursor to get better
visual results, but this is simpler, and it's going to be odd
anyway...
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This struct takes away the cursor info in xwl_seat, and has
an update function so we can share the frame handling code
across several xwl_cursors.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Make sure the button events are sent after the motion events into the new
position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Translates Wayland tablet events into corresponding X11 tablet events. As
with the prior commit, these events are modeled after those created by the
xf86-input-wacom driver to maximize compatibility with existing applications.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Creates and maintains the canonical trio of X devices (stylus, eraser,
and cursor) to be shared by all connected tablets. A per-tablet trio
could be created instead, but there are very few benefits to such a
configuration since all tablets still ultimately share control of a
single master pointer.
The three X devices are modeled after those created by xf86-input-wacom
but use a generic maximum X and Y that should be large enough to
accurately represent values from even the largest currently-available
tablets.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
The wp_tablet_seat interface provides us with notifications as tablets,
tools, and pads are connected to the system. Add listener functions and
store references to the obtained devices.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
If we're notified about the existence of the wp_tablet_manager interface,
we bind to it so that we can make use of any tablets that are (or later
become) available. For each seat that exists or comes into existance at
a later point, obtain the associated tablet_seat.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Without this, assertion failures can make life hard for users and those
trying to help them.
v2:
* Change commit log wording slightly to "can make life hard", since
apparently e.g. logind can alleviate that somewhat.
* Set default handler for SIGABRT in
hw/xfree86/common/xf86Init.c:InstallSignalHandlers() and
hw/xquartz/quartz.c:QuartzInitOutput() (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The number for it was merged to drm_mode.h in kernel 4.7, and the
output_names[] array just requires that we slot in new strings in
order.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The build defines these, so having the defaults is just a way for the
build system's configuration to get out of sync with the code.
v2: Drop #ifndefs around the other two defines.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
parser/scan.c was checking for #ifdef XCONFIGFILE and XCONFIGDIR and
defaulting to "xorg.conf", and "xorg.conf.d", so if you had changed
__XCONFIGFILE__ to anything else, it would have got out of sync.
Settle on the name without gratuitous underscores.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Be more precise in describing the return value.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
E.g. because Xinerama is enabled.
Fixes crash on startup and wrong colours in that case.
Bugzilla: https://bugs.freedesktop.org/100293
Bugzilla: https://bugs.freedesktop.org/100294
Fixes: 62f4405257 ("xfree86/modes: Move gamma initialization to
xf86RandR12Init12 v2")
Tested-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Despite all the careful planning of the kernel, a link may become
insufficient to handle the currently-set mode. At this point, the
kernel should mark this particular configuration as being broken
and potentially prune the mode before setting the offending connector's
link-status to BAD and send the userspace a hotplug event. This may
happen right after a modeset or later on.
Upon receiving a hot-plug event, we iterate through the connectors to
re-apply the currently-set mode on all the connectors that have a
link-status property set to BAD. The kernel may be able to get the
link to work by dropping to using a lower link bpp (with the same
display bpp). However, the modeset may fail if the kernel has pruned
the mode, so to make users aware of this problem a warning is outputed
in the logs to warn about having a potentially-black display.
This patch does not modify the current behaviour of always propagating
the events to the randr clients. This allows desktop environments to
re-probe the connectors and select a new resolution based on the new
(currated) mode list if a mode disapeared. This behaviour is expected in
order to pass the Display Port compliance tests.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Otherwise xcb will treat our attempt to send xv requests as a connection
error (quite reasonably: we're asking it to emit a request for which
there is no defined major opcode), and we'll die quietly the first time
we hit KdBlockhandler.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
DRM_EVENT_CONTEXT_VERSION is the latest context version supported by
whatever version of libdrm is present. modesetting was blindly asserting
it supported whatever version that may be, even if it actually didn't.
With libdrm 2.4.78, setting a higher context version than 2 will attempt
to call the page_flip_handler2 vfunc if it was non-NULL, which being a
random chunk of stack memory, it might well have been.
Set the version as 2, which should be bumped only with the appropriate
version checks.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
No driver is using these, as far as I know.
v2: Tripwire the entity hook arguments to xf86Config*Entity, fix
documentation (Eric Anholt)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than setting up a per-screen private, just conditionally
initialize ScrnInfoRec::DPMSSet based on the config options, and inspect
that to determine whether DPMS is supported.
We also move the "turn the screen back on at CloseScreen" logic into the
DPMS extension's (new) reset hook. This would be a behavior change for
the non-xfree86 servers, if any of them had non-stub DPMS support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
A null pointer dereference can occur in dmxSync, because TimerForce
does not handle a null pointer.
dmxSyncTimer is set to NULL a few lines above on a certain condition,
which happened on my machine. The explicit NULL check allowed me to
start Xdmx again without a segmentation fault.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The X Server never generates a global config.h, and instead all these
paths are including dix-config.h or xorg-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
It had nothing left in it that was used but wasn't in dix-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
ajax deleted the evdev driver in the removal of fbdev and the linux
backend.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
There is no pixmap associated with source-only pictures.
Fixes Xephyr -fakexa crashing on startup.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Multiple calls to xf86EdidMonitorSet (which can be triggered e.g. by
running xrandr) would potentially keep adding the same modes, causing
the Monitor->Modes list to keep growing larger and using up more memory.
Fix this by calling xf86PruneDuplicateModes after adding the modes
returned by xf86DDCGetModes. This makes sure there's only one instance
of each unique mode in the list.
v2:
* Replace semicolon with {} for empty for loop (Emil Velikov)
* Slightly tweak commit log to avoid minor inaccuracy about what
xf86PruneDuplicateModes does
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99521
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Copied from Mesa with no modifications. Gives us Geminilake PCI IDs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
There's really no reason to pretend to support this, apps hate it, all
we're doing is giving people a way to injure themselves. It doesn't work
anyway with any Radeon, any NVIDIA chip, or any Intel chip since i810.
Rip out all the logic for handling 24bpp pixmaps and framebuffers, and
silently ignore the old options that would ask for it.
The cirrus alpine driver has been updated to default to 16bpp, and both
it and the i810 driver can now use the 32->24 conversion code in shadow
if they want. All other drivers support 32bpp. Configurations that
explicitly request 24bpp in order to fit in VRAM will be broken now
though.
v2: Fix command line options to silently ignore 24bpp rather than fail
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This ends up passing 0 as the bpp argument to fb screen setup, which is
not really the best plan.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the screen pixmap or the corresponding texture creation with glamor
fails, exit cleanly with an error message instead of segfaulting.
Fixes: https://bugzilla.redhat.com/1431633
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The linemarkers in the preprocessor output from gcc5 on Cygwin have
canonicalized paths to included files (e.g. xserver/build/../include/misc.h
is canonicalized to xserver/build/include/misc.h). (see gcc svn rev 210264,
which causes the transformation performed by -fcanonical-system-headers to
be applied to all include pathnames)
These canonicalized paths won't match $topdir, so sdksyms doesn't look at
the contents of those headers for sdk exported symbols.
Workaround this by canonicalizing all the paths we consider, using readlink.
v2:
Keep a cache of readlink results so it isn't quite so dreadfully slow.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Client resources can survive the client itself, in which case we
may end up in our sync callback trying to access client's data after
it's been freed/reclaimed.
Add a ClientStateCallback handler to monitor the client state changes
and clear the sync callback set up by the glamor drm code if any.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
After an X cursor is unrealized, the seat's corresponding x_cursor is
cleared, but if a frame callback was pending at the time, it will
remain and thus prevent any further cursor update, leaving the window
with no cursor.
Make sure to destroy the frame callback, if any, when that occurs, so
that next time a cursor needs to be set, it won't be ignored for a frame
callback that will never be triggered.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1389327
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Rui Matos <tiagomatos@gmail.com>
in XWayland, dri3_send_open_reply() is called from a sync callback, so
there is a possibility that the client might be gone when we get to the
callback eventually, which leads to a crash in _XSERVTransSendFd() from
WriteFdToClient() .
Check if clientGone has been set in the sync callback handler to avoid
this.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99149
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1416553
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
keyboard_check_repeat() fetches the XWayland seat from the
dev->public.devicePrivate do do its thing.
If a key event is sent programmatically through Xtest, our device is the
virtual core keyboard and that has a dev->public.devicePrivate of NULL,
leading to a segfault in keyboard_check_repeat().
This is the case with "antimicro" which sends key events based on the
joystick buttons.
Don't set the checkRepeat handler on the VCK since it cannot possibly work
anyway and it has no effect on the actual checkRepeat intended functionality.
Bugzilla: https://bugzilla.redhat.com/1416244
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the shadow framebuffer overallocation bug fixed (ref below), Xorg +
fbdev has tens to hundreds of kilobytes more baseline memory usage than
Xfbdev. That's not nothing, but it's little enough that we should focus
our efforts on the server that actually gets development attention.
https://cgit.freedesktop.org/xorg/driver/xf86-video-fbdev/commit/?id=2c5eba8
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
The code as written would match anything declared extern. _X_EXPORT is
what we really mean here. That's a macro, so check for what it expands
to and skip if not found.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
During the InitInput() phase, the wayland events get dequeued so we
can possibly end up calling dispatch_pointer_motion_event().
If this occurs before xwl_seat->focus_window is set, it leads to a NULL
pointer derefence and a segfault.
Check for xwl_seat->focus_window in both pointer_handle_frame() and
relative_pointer_handle_relative_motion() prior to calling
dispatch_pointer_motion_event() like it's done in
pointer_handle_motion().
Bugzilla: https://bugzilla.redhat.com/1410804
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The X11 window manager (XWM) of a Wayland compositor can use the
_XWAYLAND_ALLOW_COMMITS property to control when Xwayland sends
wl_surface.commit requests. If the property is not set, the behaviour
remains what it was.
XWM uses the property to inhibit commits until the window is ready to be
shown. This gives XWM time to set up the window decorations and internal
state before Xwayland does the first commit. XWM can use this to ensure
the first commit carries fully drawn decorations and the window
management state is correct when the window becomes visible.
Setting the property to zero inhibits further commits, and setting it to
non-zero allows commits. Deleting the property allows commits.
When the property is changed from zero to non-zero, there will be a
commit on next block_handler() call provided that some damage has been
recorded.
Without this patch (i.e. with the old behaviour) Xwayland can and will
commit the surface very soon as the application window has been realized
and drawn into. This races with XWM and may cause visible glitches.
v3:
- introduced a simple setter for xwl_window::allow_commits
- split xwl_window_property_allow_commits() out of
xwl_property_callback()
- check MakeAtom(_XWAYLAND_ALLOW_COMMITS)
v2:
- use PropertyStateCallback instead of XACE, based on the patch
"xwayland: Track per-window support for netwm frame sync" by
Adam Jackson
- check property type is XA_CARDINAL
- drop a useless memcpy()
Weston Bug: https://phabricator.freedesktop.org/T7622
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix the following warning due to --disable-glamor:
CC Xwayland-xwayland.o
In file included from /home/pq/local/include/wayland-client.h:40:0,
from xwayland.h:35,
from xwayland.c:26:
xwayland.c: In function ‘block_handler’:
/home/pq/local/include/wayland-client-protocol.h:3446:2: warning: ‘buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
wl_proxy_marshal((struct wl_proxy *) wl_surface,
^
xwayland.c:466:23: note: ‘buffer’ was declared here
struct wl_buffer *buffer;
^
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Refactor xwl_screen_post_damage() and split the window specific code
into a new function xwl_window_post_damage().
This is a pure refactoring, there are no behavioral changes. An assert
is added to xwl_window_post_damage() to ensure frame callbacks are not
leaked if a future patch changes the call.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
First, move them to the end of the struct, for marginally better cache
locality for the struct members that actually have meaning; move the
existing slots at the end of the struct up near some others with similar
meanings. Second, only keep four slots each of integer, data pointer,
and function pointer; we've rarely used this escape hatch so this is
still plenty.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Never set by the core, not used in any modern driver.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Just no.
The ddxDesign chunk removes the whole para about xf86FixPciResource,
since it turns out that function doesn't exist at all anymore.
The only drivers that reference this at all are i128 and mga, and even
then only in the non-pciaccess path.
v2:
- Update commentary about i128/mga
- Don't remove the BiosBase keyword from the config parser since that
would turn a no-op into a fatal error (Aaron Plattner)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Seriously not worth the effort of tracking this, especially now that
competent drivers don't have a limit. The sis driver does inspect this
member, but hilariously does so only so it can print the same information
as the core does.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Only mach64 and rendition actually use this feature. Everyone else just
checks it in their ValidMode hook, they can too.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We don't actually need (or intend) to keep this struct the same across
revisions.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Previously, we would swap the width/height of the Xwayland output based
on the output rotation, so that the overall screen size would match the
actual rotation of each output.
Problem is the RandR's ConstrainCursorHarder() handler will also apply
the output rotation, meaning that when the output is rotated, the
pointer will be constrained within the wrong dimension.
Moreover, XRandR assumes the original output width/height are unchanged
when the output is rotated, so by changing the Xwayland output width and
height based on rotation, Xwayland causes XRandr to report the wrong
output sizes (an output of size 1024x768 rotated left or right should
remain 1024x768, not 768x1024).
So to avoid this issue and keep things consistent between Wayland and
Xwayland outputs, leave the actual width/height unchanged but apply the
rotation when computing the screen size. This fixes both the output size
being wrong in "xrandr -q" and the pointer being constrained in the
wrong dimension with rotated with weston.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the Wayland compositor sets a rotation on the output, Xwayland
translates the transformation as an xrandr rotation for the given
output.
However, if the rotation is not supported by the CRTC, this is not
a valid setup and xrandr queries will fail.
Pretend we support all rotations and reflections so that the
configuration remains a valid xrandr setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For some applications (like fullscreen games) it matters for XRandr
resolution to be correctly set and equal to root window resolution.
In XServer there is already hack for this, adapted it for XWayland.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99574
Signed-off-by: Svitozar Cherepii <razotivs@gmail.com>
Tested-by: Svitozar Cherepii <razotivs@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Currently if modesetting ever fails to set a hardware cursor it will switch
to using a software cursor and never go back. Change this to only
permanently switch to a software cursor if -ENXIO is returned (which means
hardware cursors not supported), and to otherwise still try a hardware
cursor first every time a new one is set. This is needed because hardware
may be able to handle some cursors in hardware and others not, or virtual
hardware may be able to handle hardware cursors at some times and not
others.
Changes since v1, v2 and v3:
* take into account the switch to load_cursor_argb_check
* keep the permanent software cursor fall-back if -ENXIO is returned
* move parts of v3 into separate patches
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5:
- Removed parts of patch already committed as part of 14c21ea1.
- Adjusted code slightly to match surrounding code.
- Effectively reverted af916477 which is made unnecessary by this patch.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5: Updated the patch to apply to current git HEAD, split up into two
patches (server and modesetting driver) and adjusted the code slightly
to match surrounding code. I also removed the new exported function
ShowCursorCheck(), as instead just changing ShowCursor() to return Bool
should not affect its current callers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
xf86RecolorCursor() may be called directly from XRecolorCursor as well
as from xf86ScreenSetCursor(). In the latter case, the input lock is
already held, but not for the former and so we need to add a wrapper
function that acquires the input lock before performing
xf86RecolorCursor()
References: https://bugs.freedesktop.org/show_bug.cgi?id=99358
This can happen when a module fails to load:
Program received signal SIGSEGV, Segmentation fault.
UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
848 name = mod->VersionInfo->modname;
(gdb) bt
#0 UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
#1 0x00005555555ddd1b in LoadModule (module=module@entry=0x5555559c7ce0 "fbdev", options=0x0, modreq=modreq@entry=0x0, errmaj=errmaj@entry=0x7fffffffe8ec) at ../../../../hw/xfree86/loader/loadmod.c:824
#2 0x00005555555edfe9 in xf86LoadModules (list=list@entry=0x5555559dcf50, optlist=optlist@entry=0x0) at ../../../../hw/xfree86/common/xf86Init.c:1506
#3 0x00005555555ee7bc in InitOutput (pScreenInfo=pScreenInfo@entry=0x5555559abf80 <screenInfo>, argc=argc@entry=4, argv=argv@entry=0x7fffffffeb18) at ../../../../hw/xfree86/common/xf86Init.c:484
#4 0x00005555555a885c in dix_main (argc=4, argv=0x7fffffffeb18, envp=<optimized out>) at ../../dix/main.c:197
#5 0x00007ffff5d582b1 in __libc_start_main (main=0x555555593130 <main>, argc=4, argv=0x7fffffffeb18, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffeb08) at ../csu/libc-start.c:291
#6 0x000055555559316a in _start ()
Fixes: 8e83eacb9e ("loader: Remove unused path and name from ModuleDescPtr")
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
V2:
1. update comment
2. check bustype if PCI
3. configure add libdrm version check for drmGetDevice
Get PCI information from info->fd with drmGetDevice instead of
assuming the info->fd is the first entity of scrn which is not
true for multi entities scrn.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Just a waste of memory. Path was never referenced at all, and name was
only used when unloading the module; we can just as well get the
module's internal idea of its name from VersionInfo.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nobody was ever calling this with a non-null argument for subdir list or
pattern list. Having done this, InitSubdirs is only ever called with a
NULL argument, so it's really just a complicated way of duplicating the
default list; we can remove that and just walk the list directly.
The minor error code was only ever used to distinguish among two cases
of LDR_BADUSAGE. Whatever.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Callers only ever use this for a single directory anyway.
While we're at it, also move xf86DriverListFromCompile near its only
user in the X -configure code (and inline it out of existence), and
remove LoaderFreeDirList as it's unused (since X -configure is just
going to exit anyway, none of that code cares about cleanup).
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There's no reason a driver should ever care about this.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
indent(1) gets confused by function-like macros with no trailing
semicolon, which is fair enough really.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The idea here is that the driver might have once been old enough to not
have the driverFunc slot in DriverRec, with the module ABI not having
changed when it was added. That was ages ago, and drivers always declare
themselves with DriverRec not DriverRec1, so uninitialized slots will
simply be zero.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Everybody using this functionality specifies a major version, which
makes sense. If you don't care about a minor version, that's equivalent
to saying you require minor >= 0, so just say so; likewise patch level.
Likewise ABI class is always specified.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The enum has been unused since at least the removal of elfloader.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This looks like more, but only if you don't compare it to the number
pulled in by misc.h.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This API is dumb. uname(3) exists, feel free to use it, but ideally
write to the interface not to the OS. There are a couple of drivers
using this API, they could all reasonably just not.
This also removes the OS name from the loader subdirectory path search.
Having /usr/lib/xorg shared across OSes is a non-goal here.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Now that users can set the path only via LoaderSetPath(), we can simplify
things.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Afaics the argument hasn't been part of the API since the documentation
has been converted to xml with commit fc6ebe1e1d "Convert LinuxDoc
documents to DocBook/XML"
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Similar to its little brother - LoadSubModule. Currently all call sites
provide NULL anyway ;-)
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The "copying selected object files" message appears as some source
files have the same name, and some objects are included twice.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Detailed mode reports 108 mm x 68 mm which is for smaller display.
Maximum image size reports 15 cm x 10 cm which aligns with its physical
size, use this size instead.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Allow OutputClass config snippets to modify the module-path.
Note that any specified ModulePaths will be pre-pended to the normal
ModulePath. The idea behind this is that any output hardware specific
modules should have preference over the normal modules.
One use-case for this is the nvidia binary driver, this allows a
config snippet like this:
Section "OutputClass"
MatchDriver "nvidia"
Modulepath "/usr/lib64/nvidia/modules"
EndSection
To get the nvidia glx specific glx module loaded, but only when the
nvidia kernel driver is loaded.
Together with the glvnd work done recently, this allows the nouveau
+ mesa and nvidia-binary userspace stacks to co-exist on the same
system without any ldconfig / xorg.conf tweaking and the xserver will
automatically do the right thing depending on which kernel driver
(nouveau or nvidia) is loaded.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Allow using:
Option "PrimaryGPU" "yes"
In an OutputClass section to override the default primary GPU device
selection which selects the GPU used as output by the firmware.
If multiple output devices match an OutputClass section with
the PrimaryGPU option set, the first one enumerated becomes the
primary GPU.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for allowing an OutputClass section to
override the default primary GPU device selection.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for setting options in OutputClass Sections and having these
applied to any matching output devices.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make OutputClassMatches directly take a xf86_platform_device as argument,
rather then an index into xf86_platform_devices. This makes things
easier for callers which already have a xf86_platform_device pointer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
xf86MatchDevice returns a dynamically allocated list of GDevPtr-s,
free this when we're done with it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
shadowDamage is just obfuscation. The other two macros won't work
outside shadow.c since the private key is in fact static there (meaning
the extern decl is a lie).
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In InitOutput, if xf86HandleConfigFile returns CONFIG_NOFILE
(which it does if no config file or directory is present), the
autoconfig flag is set, causing xf86AutoConfig to be called
later on.
xf86AutoConfig calls xf86OutputClassDriverList via the
call tree:
xf86AutoConfig =>
listPossibleVideoDrivers =>
xf86PlatformMatchDriver =>
xf86OutputClassDriverList
and xf86OutputClassDriverList attempts to traverse a linked list
that is a member of the XF86ConfigRec struct pointed to by the
global xf86configptr, which is NULL at this point because the
XF86ConfigRec struct is only allocated (by xf86readConfigFile)
AFTER the config file and directory have been successfully
opened; the CONFIG_NOFILE return from xf86HandleConfigFile
occurs BEFORE the call to xf86readConfigFile which allocates
the XF86ConfigRec struct.
Rx: In read.c (for symmetry with xf86freeConfig, which already
appears in this file), add a new function xf86allocateConfig
which tests the value of xf86configptr and, if it's NULL,
allocates the XF86ConfigRec struct and deposits the pointer
in xf86configptr. In xf86Parser.h, add a prototype for the
new xf86allocateConfig function.
Back in read.c, #include "xf86Config.h". In xf86readConfigFile,
change the open-code call to calloc to a call to the new
xf86allocateConfig function.
In xf86AutoConfig.c, add a call to the new xf86allocateConfig function
to the beginning of xf86AutoConfig to make sure the XF86ConfigRec struct
is allocated.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
If we did not find any non GPU Screens, try again ignoring the notion
of any video devices being the primary device. This fixes Xorg exiting
with a "no screens found" error when using virtio-vga in a
virtual-machine and when using a device driven by simpledrm.
This is a somewhat ugly solution, but it is the best I can come up with
without major surgery to the bus and probe code.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is primarily a preparation patch for fixing the xserver exiting with
a "no screens found" error even though there are supported video cards,
due to the server not recognizing any card as the primary card.
This also fixes the (mostly theoretical) case of a platformBus capable
driver adding a device as GPUscreen before a driver which only supports
the old PCI probe method gets a chance to claim it as a normal screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If foundScreen is TRUE, then all the code below the removed if
will not execute until we reach the return foundScreen; at the
end, so this entire if block is redundant.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Sometimes, Xwayland will try to use a cursor that has just been freed,
leading to a crash when trying to access that cursor data either in
miPointerUpdateSprite() or AnimCurTimerNotify().
CheckMotion() updates the pointer's cursor based on which xwindow
XYToWindow() returns, and Xwayland implements its own xwl_xy_to_window()
to fake a crossing to the root window when the pointer has left the
Wayland surface but is still within the xwindow.
But after an xwindow is unrealized, the last xwindow used to match the
xwindows is cleared so two consecutive calls to xwl_xy_to_window() may
not return the same xwindow.
To avoid this issue, update the last_xwindow based on enter and leave
notifications instead of xwl_xy_to_window(), and check if the xwindow
found by the regular miXYToWindow() is a child of the known last
xwindow, so that multiple consecutive calls to xwl_xy_to_window()
return the same xwindow, being either the one found by miXYToWindow()
or the root window.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1385258
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Vít Ondruch <vondruch@redhat.com>
Tested-by: Satish Balay <balay@fastmail.fm>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Commits 816015648f and
fee0827a9a made it so that
wl_keyboard::enter doesn't result in X clients getting KeyPress events
while still updating our internal xkb state to be in sync with the
host compositor.
wl_keyboard::leave needs to be handled in the same way as its
semantics from an X client POV should be the same as an X grab getting
triggered, i.e. X clients shouldn't get KeyRelease events for keys
that are still down at that point.
This patch uses LeaveNotify for these events on wl_keyboard::leave and
changes the current use of KeymapNotify to EnterNotify instead just to
keep some symmetry between both cases.
On ProcessDeviceEvent() we still need to deactivate X grabs if needed
for KeyReleases.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition by the manual is:
calloc(size_t nmemb, size_t size)
Swap the arguments of calloc() calls to be the right way around.
Presumably this makes no functional difference, but better follow the
spec.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not needed anymore now that mipointer exposes an API for that,
miPointerInvalidateSprite()
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
posix_fallocate() does an explicit rollback if it gets EINTR, and
this is a problem on slow systems because when the allocation size
is sufficiently large posix_fallocate() will always be interrupted
by the smart scheduler's SIGALRM.
Changes since v1 - big comment in the code to explain what is going on
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Daniel Stone <daniels@collabora.com>
If we're never painting anything in the window, we probably don't need
to map it.
v2: Drop ephyr_glamor_gles2 from hostx.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
xf86CheckHWCursor() would dereference sPriv without NULL checking it. If Option
"SWCursor" is specified, sPriv == NULL. In this case we should assume that HW
cursors are not supported.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
On some random condition, a touch event may trigger a crash in Xwayland
in GetTouchEvents().
The (simplified) backtrace goes as follow:
(gdb) bt
#0 GetTouchEvents() at getevents.c:1892
#1 QueueTouchEvents() at getevents.c:1866
#2 xwl_touch_send_event() at xwayland-input.c:652
#5 wl_closure_invoke() from libwayland-client.so.0
#6 dispatch_event() from libwayland-client.so.0
#7 wl_display_dispatch_queue_pending() from libwayland-client.so.0
#8 xwl_read_events() at xwayland.c:483
#9 ospoll_wait() at ospoll.c:412
#10 WaitForSomething() at WaitFor.c:222
#11 Dispatch() at dispatch.c:412
#12 dix_main() at main.c:287
#13 __libc_start_main() at libc-start.c:289
#14 _start ()
The crash occurs when trying to access the sprite associated with the
touch device, which appears to be NULL. Reason being the device itself
is more a keyboard device than a touch device.
Moreover, it appears the device is neither enabled nor activated
(inited=0, enabled=0) which doesn't seem right, but matches the code in
init_touch() from xwayland-input.c which would enable the device if it
was previously existing and otherwise would create the device but not
activate it.
Make sure we do activate and enable touch devices just like we do for
other input devices such as keyboard and pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Pointer enter event coordinates are surface relative and we need them to
be screen relative for pScreen->SetCursorPosition().
https://bugzilla.gnome.org/show_bug.cgi?id=758283
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit c7e8d4a6ee had already unifdef
MODESETTING_OUTPUT_SLAVE_SUPPORT but commit
9257b1252d didn't notice that.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Prior to this commit the Xorg.wrap code to detect if root rights are
necessary checked for DRM_IOCTL_MODE_GETRESOURCES succeeding *and*
reporting more then 0 output connectors.
DRM_IOCTL_MODE_GETRESOURCES succeeding alone is enough to differentiate
between old drm only cards (which need ums and thus root) and kms capable
cards.
Some hybrid gfx laptops have 0 output connectors on one of their 2 GPUs,
resulting in Xorg needlessly running as root. This commits removes the
res.count_connectors > 0 check, fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Fixes DRI2 client driver name mapping for newer AMD GPUs with the
modesetting driver, allowing the DRI2 extension to initialize.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a missing ifdef needed for --disable-glamor.
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Special case for the systemd-logind case in xfree86: when we're vt-switched
away and a device is plugged in, we get a paused fd from logind. Since we
can't probe the device or do anything with it, we store that device in the
xfree86 and handle it later when we vt-switch back. The device is not added to
inputInfo.devices until that time.
When the device is removed while still vt-switched away, the the config system
never notifies the DDX. It only runs through inputInfo.devices and our device
was never added to that.
When a device is plugged in, removed, and plugged in again while vt-switched
away, we have two entries in the xfree86-specific list that refer to the same
device node, both pending for addition later. On VT switch back, the first one
(the already removed one) will be added successfully, the second one (the
still plugged-in one) fails. Since the fd is correct, the device works until
it is removed again. The removed devices' config_info (i.e. the syspath)
doesn't match the actual device we addded tough (the input number increases
with each plug), it doesn't get removed, the fd remains open and we lose track
of the fd count. Plugging the device in again leads to a dead device.
Fix this by adding a call to notify the DDX to purge any remainders of devices
with the given config_info, that's the only identifiable bit we have at this
point.
https://bugs.freedesktop.org/show_bug.cgi?id=97928
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes but it makes it easier to remove elements from the
middle of the list (future patch).
We don't have an init call into this file, so the list is manually
initialized.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
They're identically laid-out structs but let's use the right type to search
for our desired value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Prevents the HW cursor from intermittently jumping around when the
cursor image is changed while the cursor is being moved. This is hardly
noticeable in normal operation but can be quite confusing when stepping
through these codepaths in a debugger.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
xf86CursorScreenRec::HotX/Y contain 0 for PRIME slave screens.
Fixes incorrect HW cursor position on PRIME slave screens.
Also hoist the hotspot translation out from xf86ScreenSet/MoveCursor to
xf86Set/MoveCursor, since the hotspot position is a property of the
cursor, not the screen.
v2:
* Squash patches 1 & 2 of the v1 series, since it's basically the same
problem
* Use the master screen's xf86CursorScreenRec::HotX/Y instead of
CursorRec::bits->x/yhot, since CursorRec::bits can be NULL (Hans de
Goede)
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
eglGetDisplay forces the implementation to guess which kind of display
it's been handed. glvnd does something different from Mesa, and in
general it's impossible for the library to get this right. Add a new
inline that gets the logic right, and works around a quirk in epoxy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
As of last commit all the places in our configure.ac require version
2.3.1 (released back in 2007) or later. With the latter introducing the
1.3.0 version, as returned by drmGetLibVersion.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Presently the option guards both direct and accelerated indirect GLX. As
such when one toggles it off they end up without any acceleration.
Remove the option all together until we have the time to split/rework
things.
Cc: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The option is misleading and using it leads to disabling both direct and
accelerated indirect GLX. In such cases the xserver GLX attempts to
match DRISW (IGLX) configs with the DRI2/3 ones (direct GLX) leading to
all sorts of fun experience.
Remove the option until we get a clear split and control over direct vs
indirect GLX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emulate pointer warps by locking the pointer and sending relative
motion events instead of absolute. X will keep track of the "fake"
pointer cursor position given the relative motion events, and the
client warping the cursor will warp the faked cursor position.
Various requirements need to be met for the pointer warp emulator to
enable:
The cursor must be invisible: since it would not be acceptable that a
fake cursor position would be different from the visual representation
of the cursor, emulation can only be done when there is no visual
representation done by the Wayland compositor. Thus, for the emulator
to enable, the cursor must be hidden, and would the cursor be displayed
while the emulator is active, the emulator would be destroyed.
The window that is warped within must be likely to have pointer focus.
For example, warping outside of the window region will be ignored.
The pointer warp emulator will disable itself once the fake cursor
position leaves the window region, or the cursor is made visible.
This makes various games depending on pointer warping (such as 3D
first-person shooters and stategy games using click-to-drag-map like
things) work.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Translate grabbing a pointer device with confineTo set to a window into
confining the Wayland pointer using the pointer constraints protocol.
This makes clients that depend on the pointer not going outside of the
window region, such as certain games and virtual machines viewers, to
function more properly.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If there was an relative pointer motion within the same frame as an
absolute pointer motion, provide both the absolute coordinate and the
unaccelerated delta when setting the valuator mask.
If a frame contained only a relative motion, queue an absolute motion
with an unchanged position, but still pass the unaccelerated motion
event.
If the wl_seat advertised by the compositor is not new enough, assume
each relative and absolute pointer motion arrives within their own
separate frames.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Wait until wl_pointer.frame with dispatching the pointer motion event,
if wl_pointer.frame is supported by the compositor. This will later be
used to combine unaccelerated motion deltas with the absolute motion
delta.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Generating relative and absolute movement events from the same input
device is problematic, because an absolute pointer device doesn't
expect to see any relative motion events. To be able to generate
relative pointer motion events including unaccelerated deltas, create a
secondary pointer device 'xwayland-relative-pointer', and use that for
emitting relative motion events.
Signed-off-by: Krzysztof Sobiecki <sobkas@gmail.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Put device class initialization in init_[device_class](xwl_seat) and
releasing in release_[device class](xwl_seat). The purpose is to make
it easier to add more type of initialization here later, without making
the function too large.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Will be used for getting unaccelerated motion events and later for
relative motions used by a pointer warp emulator.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The way we map the touch absolute device to screen coordinates can't
work across wl_output mode and geometry events. Instead, set up
a fixed coordinate space, and transform touch events according to
the screen coordinate space as they happen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
The checks in xwayland's XYToWindow handler pretty much assumes that the
sprite is managed by the wl_pointer, which is not entirely right, given
1) The Virtual Core Pointer may be controlled from other interfaces, and
2) there may be other SpriteRecs than the VCP's.
This makes XYToWindow calls return a sprite trace with just the root
window if any of those two assumptions are broken, eg. on touch events.
So turn the check upside down, first assume that the default XYToWindow
proc behavior is right, and later cut down the spriteTrace if the
current device happens to be the pointer and is out of focus. We work
our way to the device's lastSlave here so as not to break assumption #1
above.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This change effectively reverts commit 074cf58. We were falling back from
drmModeSetCursor2() to drmModeSetCursor() whenever the first failed. This
fall-back only makes sense on pre-mid-2013 kernels which implemented the
cursor_set hook but not cursor_set2, and in this case the call to
drmModeSetCursor2() will always return -EINVAL. Specifically, a return
value of -ENXIO usually means that neither are supported.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
[hdegoede@redhat.com: initialize ret to -EINVAL]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We get multiple udev events for actions like docking a laptop into its
station or plugging a monitor to the station. By consuming as much
events as we can, we reduce the number of output re-evalutions.
I.e. having a Lenovo X250 in a ThinkPad Ultra Dock and plugging a
monitor to the station generates 5 udev events. Or having 2 monitors
attached to the station and docking the laptop generates 7 events.
It depends on the timing how many events can consumed at once.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
[hdegoede@redhat.com: Keep goto out so that we always call RRGetInfo()]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This fix is for the following xorg.conf can work:
Section "ServerFlags"
Option "AutoAddGPU" "off"
EndSection
Section "Device"
Identifier "Amd"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Intel"
Driver "modesetting"
BusID "pci:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
GPUDevice "Amd"
EndSection
Without AutoAddGPU off, modesetting DDX will also be loaded
for GPUDevice.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new platform bus code and the old PCI bus code overlap. Platform bus
can handle any type of device, including PCI devices, whereas the PCI code
can only handle PCI devices. Some drivers only support the old style
PCI-probe methods, but the primary device detection code is server based,
not driver based; so we might end up with a primary device which only has
a PCI bus-capable driver, but was detected as primary by the platform
code, or the other way around.
(The above paragraph was shamelessly stolen from Hans de Goede, and
customized.)
The latter case applies to QEMU's virtio-gpu-pci device: it is detected as
a BUS_PCI primary device, but we actually probe it first (with the
modesetting driver) through xf86platformProbeDev(). The
xf86IsPrimaryPlatform() function doesn't recognize the device as primary
(it bails out as soon as it sees BUS_PCI); instead, we add the device as a
secondary graphics card under "autoAddGPU". In turn, the success of this
automatic probing-as-GPU prevents xf86CallDriverProbe() from proceeding to
the PCI probing.
The result is that the server exits with no primary devices detected.
Commit cf66471353 ("xfree86: use udev to provide device enumeration for
kms devices (v10)") added "cross-bus" matching to xf86IsPrimaryPci(). Port
that now to xf86IsPrimaryPlatform(), so that we can probe virtio-gpu-pci
as a primary card in platform bus code.
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=93675
Signed-off-by: Kyle Guinn <elyk03@gmail.com>
[hdegoede@redhat.com: Simplify by adding 2 if conds together with &&]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A couple of memory leaks fixes and avoiding bit shifting on an
unitialized value.
[hdegoede@redhat.com: Split out some non free fixes in separate patches]
[hdegoede@redhat.com: Don't touch ancient (and weird) os/rpcauth.c code]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Useless as an XVideo implementation with zero adaptors might be, it's
apparently a thing in the wild. Catch this case and bail out of xv init
if it happens.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
dropped the providing of a pScrn->ChangeGamma callback from the xf86RandR12
code. Leaving pScrn->ChangeGamma NULL in most cases.
This triggers the BadImplementation error in xf86ChangeGamma() :
if (pScrn->ChangeGamma)
return (*pScrn->ChangeGamma) (pScrn, gamma);
return BadImplementation;
Which causes X-apps using XF86VidModeSetGamma to crash with a
X protocol error.
This commit fixes this by re-introducing the xf86RandR12ChangeGamma
helper removed by the commit and adjusting it to work with the new
combined palette / gamma code.
Fixes: b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is a preparation patch to allow easier usage of init_one_component
outside of xf86RandR12CrtcInitGamma.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
When using secondary GPU outputs the primary GPU's blockhandler
will copy changes from its framebuffer to a pixmap shared with the
secondary GPU.
In reverse prime setups the secondary GPU's blockhandler will do another
copy from the shared pixmap to its own framebuffer.
Before this commit, if the primary GPU's blockhandler would run after
the secondary GPU's blockhandler and no events were pending, then the
secondary GPU's blockhandler would not run until some events came in
(WaitForSomething() would block in the poll call), resulting in the
secondary GPU output sometimes showing stale contents (e.g. a just closed
window) for easily up to 10 seconds.
This commit fixes this by setting the timeout passed into the
blockhandler to 0 if any shared pixmaps were updated by the primary GPU,
forcing an immediate re-run of all blockhandlers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
When using reverse prime we do 2 copies, 1 from the primary GPU's
framebuffer to a shared pixmap and 1 from the shared pixmap to the
secondary GPU's framebuffer.
This means that on the primary GPU side the copy MUST be finished,
before we start the second copy (before the secondary GPU's driver
starts processing the damage on the shared pixmap).
This fixes secondary outputs sometimes showning (some) old fb contents,
because of the 2 copies racing with each other, for an example of
what this looks like see:
https://fedorapeople.org/~jwrdegoede/IMG_20160915_130555.jpg
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In Xwayland's xwl_unrealize_cursor(), the x_cursor is cleared up only
when a device value is provided to the UnrealizeCursor() routine, but
if the device is NULL as called from FreeCursor(), the corresponding
x_cursor for the xwl_seat is left untouched.
This might cause a segfault when trying to access the unrealized
cursor's devPrivates in xwl_seat_set_cursor().
A possible occurrence of this is the client changing the cursor, the
Xserver calling FreeCursor() which does UnrealizeCursor() and then
the Wayland server sending a pointer enter event, which invokes
xwl_seat_set_cursor() while the seat's x_cursor has just been
unrealized.
To avoid this, walk through all the xwl_seats and clear up all x_cursor
matching the cursor being unrealized.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
wl_display_flush() can fail with EAGAIN and Xwayland would make this a
fatal error.
When this happens, it means that Xwayland has flooded the Wayland file
descriptor, either because the Wayland compositor cannot cope or more
likely because of a deadlock situation where the Wayland compositor is
blocking, waiting for an X reply while Xwayland tries to write data to
the Wayland file descriptor.
The general consensus to avoid the deadlock is for the Wayland
compositor to never issue blocking X11 roundtrips, but in practice
blocking rountrips can occur in various places, including Xlib calls
themselves so this is not always achievable without major surgery in the
Wayland compositor/Window manager.
What this patch does is to avoid dispatching to the Wayland file
descriptor until it becomes available for writing again, while at the
same time continue processing X11 requests to release the deadlock.
This is not perfect, as there is still the possibility of another X
client hammering the connection and we'll still fail writing to the
Wayland connection eventually, but this improves things enough to avoid
a 100% repeatable crash with vlc and gtkperf.
Also, it is worth considering that window managers and Wayland
compositors such as mutter already have a higher priority than other
regular X clients thanks to XSyncSetPriority(), mitigating the risk.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1278159
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=763400
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Keeping the shm fd open beyond pixmap creation means we can easily
reach the open file descriptor limit if an X client asks us to create
that many pixmaps. Instead, let's get the wl_buffer immediatly so that
we can destroy the shm pool and close the fd before being asked to
create more.
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This speeds up headless testing of Xephyr -glamor with softpipe from
"a test per minute or so" to "a test every few seconds".
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This code is safe. If the data race fails, the result is that we take the
lock and recheck.
==================
WARNING: ThreadSanitizer: data race (pid=31401)
Read of size 1 at 0x00010f5d2500 by thread T11:
#0 wait_for_mieq_init darwinEvents.c:102 (X11.bin+0x00010003155a)
#1 -[X11Application(Private) sendX11NSEvent:] X11Application.m:1330 (X11.bin+0x00010001d652)
#2 __28-[X11Application sendEvent:]_block_invoke X11Application.m:476 (X11.bin+0x00010001887f)
#3 __tsan::invoke_and_release_block(void*) <null>:144 (libclang_rt.tsan_osx_dynamic.dylib+0x00000005d97b)
#4 _dispatch_client_callout <null>:33 (libdispatch.dylib+0x0000000020ef)
Previous write of size 1 at 0x00010f5d2500 by thread T8:
[failed to restore the stack]
Location is global 'mieqInitialized' at 0x00010f5d2500 (X11.bin+0x000100599500)
Thread T11 (tid=4367138, running) created by thread T-1
[failed to restore the stack]
Thread T8 (tid=4367130, running) created by main thread at:
#0 pthread_create <null>:144 (libclang_rt.tsan_osx_dynamic.dylib+0x000000024490)
#1 create_thread quartzStartup.c:78 (X11.bin+0x000100039d2d)
#2 QuartzInitServer quartzStartup.c:95 (X11.bin+0x000100039b96)
#3 X11ApplicationMain X11Application.m:1238 (X11.bin+0x00010001cd54)
#4 X11ControllerMain X11Controller.m:984 (X11.bin+0x00010002a5b2)
#5 server_main quartzStartup.c:136 (X11.bin+0x000100039fbb)
#6 do_start_x11_server bundle-main.c:436 (X11.bin+0x000100002e25)
#7 _Xstart_x11_server mach_startupServer.c:189 (X11.bin+0x000100004e09)
#8 mach_startup_server mach_startupServer.c:399 (X11.bin+0x0001000056a4)
#9 mach_msg_server mach_msg.c:563 (libsystem_kernel.dylib+0x000000012186)
#10 start <null>:29 (libdyld.dylib+0x000000005254)
SUMMARY: ThreadSanitizer: data race darwinEvents.c:102 in wait_for_mieq_init
==================
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This allows us to remove darwinEvents_lock() and darwinEvents_unlock()
and remove the serverRunning hack from dix
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
