A lot of EDID writers apparently end up stuffing centimeters (like the
maximum image size field) into the detailed timings, instead of millimeters.
Some of them only get it wrong in one direction. Also, add a quirk to let
us mark the largest 75hz mode as preferred, which will often be used for
EDID 1.0 CRTs.
If none is present, a default one will be created. This will be attached
to either the first device section in the xorg.conf (allowing you to
specify something like using EXA without having a screen section) or a
default screen section if none is present in the file.
This will allow the screen to not explicitly have a device section. If
this is the case and there is a device section in the xorg.conf, the first
one will be used. If there is no device section at all, a default one will
be created that loads the automatically determined module.
This is what we're currently shipping in Debian. Enables the ability for
drivers to ship a text file listing PCI ID's they support, and have the
server read them on startup when no driver is specified. This works, but
isn't the final solution.
Removes "LookupKeyboardDevice" and "LookupPointerDevice" in favor of
inputInfo.keyboard and inputInfo.pointer, respectively; all use cases
are non-XI compliant anyway.
Matches linuxPci.c changes made in 8279444a54
Fixes compiler errors:
"ix86Pci.c", line 194: too many struct/union initializers
"ix86Pci.c", line 204: too many struct/union initializers
"ix86Pci.c", line 214: too many struct/union initializers
Even though they're defined to zero by the spec, we've seen an EDID block
where the (empty) ASCII strings were stuffed in a byte early, leading to the
descriptor being considered a detailed timing instead.
This was an attempt to avoid scratch gc creation and validation for paintwin
because that was expensive. This is not the case in current servers, and the
danger of failure to implement it correctly (as seen in all previous
implementations) is high enough to justify removing it. No performance
difference detected with x11perf -create -move -resize -circulate on Xvfb.
Leave the screen hooks for PaintWindow* in for now to avoid ABI change.
Add keyc->postdown, which represents the key state as of the last mieqEnqueue
call, and use it when we need to know the posted state, instead of the
processed state (keyc->down). Add small functions to getevents.c to query and
modify key state in postdown and use them all through, eliminating previously
broken uses.
In commit 41bb9fce47, the event delivery loop
for Xinput enabled keyboards was changed and accidentally used the wrong
index variable, causing random events to be delivered when returning from VT
switch.
In addition, in commit aeba855b07,
SIGIO was blocked during delivery of these events, but not for the entire
period the xf86Events array was being used. Block SIGIO for the whole loop
to avoid other event delivery from trashing the key release events.
(cherry picked from commit aa7ed1f5f3)
Previously, the server version reported by xdpyinfo and Xorg -version would
bear some vague resemblance to a X.Org katamari version, but in the presence
of modularization (and client-server relationships with different katamari
versions on each side) those numbers don't really make sense. Instead, just
report the package version.
When branching a stable branch, master's version should be immediately updated
to the endpoint of the stable branch plus a snapshot of 1 (for example,
1.4.0.1 after server-1.4-branch). The stable branch should then be changed to
RC0 at that time (1.3.99.0, for example).
This scheme was partially attempted for server 1.3, but lacked the appropriate
master updates, thus why it had to be revisited now. While here, we can also
remove a lot of versioning complexity since everything is based on the package
version.
One of these I introduced by listing dix and mi in the same library list to
simplify other servers. The other had been hacked around using libosandcommon,
which is now gone.
This cleans up server Makefile.ams a little bit, but also means that people
messing with configure.ac need to be careful with whether they put libraries
in the _LIBS or _SYS_LIBS targets. Hopefully the comment in configure.ac will
clarify the issues.
The author of the int10 code looked at the VBIOS POSTing code
in DOSEMU to get some initial idea on how to POST a VBIOS.
To give credit to the DOSEMU Team for this inspiration a comment
was added to the code which could suggest that code from the
GPLed DOSEMU was directly incorporated into this code.
This patch should clearify the situation.
Note that pciaccess doesn't yet have Net/OpenBSD support, but the relevant
code should go there instead of disconnected code in the X Server.
While here, remove the now-disabled INCLUDE_XF86_NO_DOMAIN from the headers,
and un-disable xf8StdAccResFromOS for those OSes without domain support which
will need it.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
This was a bunch of poorly defined resource ranges per OS/platform combination
which were supposed to represent what regions could potentially have resources
allocated into them.
Composite's automatic redirection is a more general mechanism than the
ad-hoc BS machinery, so it's much prettier to implement the one in terms
of the other. Composite now wraps ChangeWindowAttributes and activates
automatic redirection for windows with backing store requested. The old
backing store infrastructure is completely gutted: ABI-visible structures
retain the function pointers, but they never get called, and all the
open-coded conditionals throughout the DIX layer to implement BS are gone.
Note that this is still not a strictly complete implementation of backing
store, since Composite will throw the bits away on unmap and therefore
WhenMapped and Always hints are equivalent.
xf86RandR12ScreenSetSize must protect calls to EnableDisableFBAccess with
suitable vtSema checks to avoid invoking driver code while the X server is
inactive.
The multi-crtc cursor code in hw/xfree86/modes holds a reference to the
current cursor. This reference must be correctly ref counted so the cursor
is not freed out from underneath this code.
This is where they should have been in the first place. All the rest of
the code in the server defines such things in the source files, not the
headers.
A bunch of CFLAGS had gone missing, so the build failed with errors like:
../../../../../hw/xfree86/os-support/linux/lnx_ev56.c:7:19: error: input.h: No such file or directory
../../../../../hw/xfree86/os-support/linux/lnx_ev56.c:8:24: error: scrnintstr.h: No such file or directory
As a result, we can remove the quirks that existed to flip the bits back around
for us. This is not confirmed in all cases due to lack of bugs containing EDID
blocks associated with the quirks, but is likely true.
The outport is most likely unnecessary on any currently used hardware,
the byte copy is necessary from what I know on IA64 and friends so leave it.
Add a new API entry point which lets a driver select the old behaviour if
such a needs is ever found.
This gives me ~20% speed up on startup on 945 hardware.
If NoAutoAddDevices is given as a server flag, then no devices will be added
from HAL events at all. If NoAutoEnableDevices is given, then the devices will
be added (and the DevicePresenceNotify sent), but not enabled, thus leaving
policy up to the client.
Make sure the font path is always 'built-ins' when we use built-in fonts,
rather than having it as a fixed path for a while, then clobbering it
halfway through startup.
Set the new randr crtc of the output before the output change notification is
delivered to the clients.
Remove RROutputSetCrtc as it is not really necessary. All we have to do is set
the output's crtc on RRCrtcNotify
When the PreferredMode option is selected in the config file, remove the
M_T_PREFERRED bit from all other preferred modes to force the config file
mode to be selected.
Code that disabled mode detection on disabled outputs would confuse
applications by listing said outputs as connected but without any modes.
This makes the disabled state in the config file affect only the initial
configuration and not subsequent modifications by RandR.
The DDX code was ignoring pending properties for computing when mode setting
was required. This meant that configurations differing only in property
values would not cause the mode to be set.
If your loader is as bad as elfloader, then it makes sense for the
server to have some stubs for you to assign to / break on. However it
is no longer 1996.
I made a mistake in some new code using MakeAtom, passing the size of the
string instead of the length of the string. Figuring there might be other
such mistakes, I reviewed the server code and found four bugs of the same
form.
The previous scheme didn't work when the client didn't create the core drawable,
e.g. the root or composite overlay window. Use refcounting via special client
resources to fix that.
Print debug messages only when the appropriate debug bit is set in the
8086 state vector, so you can focus in on the call you're actually
interested in.
This is to avoid issues with redirected windows which are located partly or
fully outside of a screen edge, resulting in unusual cliprects which the 3D
drivers generally can't handle. The symptoms in such cases would be incorrect
rendering or even crashes or hangs.
at server startup, and not against the virtual X/Y parameters
as they can change.
This fixes an issue when canGrow is TRUE and modes get dropped
when using the virtual X/Y parameters.
Major stylistic cleanups, greatly expanded cross-reference ("SEE ALSO")
section and some typo fixes.
This patch by Branden Robinson. Forward-ported by Fabio M. Di Nitto.
When the root window changed size, xf86XVFillKeyHelper would not revalidate
the GC, leaving the clip at the old size causing lossage (and possibly
memory corruption if the screen and frame buffer shrank).
Fixed by just using a scratch GC; saving memory, eliminating bugs and
shrinking the code.
To be used by AIGLX for GLX_EXT_texture_from_pixmap without several data copies.
The texOffsetStart hook must make sure that the given pixmap is accessible by
the GPU for texturing and return an 'offset' that can be used by the 3D
driver for that purpose.
The texOffsetFinish hook is called when the pixmap is no longer being used for
texturing.
DRI uses a non-screen block/wakeup handler which will be executed after the
screen block handler finishes. To ensure that the rotation block handler is
executed under the DRI lock, dynamically wrap the screen block handler for
rotation.
Leaving devices enabled during server startup can cause problems during the
initial mode setting in the server, especially when they are used for
different purposes by the X server than by the BIOS. Disabling all of them
before any mode setting is attempted provides a stable base upon which the
remaining mode setting operations can be built.
The code in hw/xfree86/os-support/bus/sparcPci.c:simbaCheckBus()
is trying to mimmick VGA routing by disabling I/O space responses
behind the Simba PCI-PCI controller.
Unfortunately, doing this also happens to disable access to the
IDE controller I/O space registers, thus crashing the system. The
granularity of the I/O disabling in the Simba controller is not
fine enough to disable VGA without also disabling the IDE controller
registers.
When the modules section is parsed, if a module is set to be loaded by
default, this will be logged. If it is redundantly specified in xorg.conf,
this will also be noted. None of this logging will happen if the xorg.conf
lacks a modules section.
This provides a new option, UseDefaultFontPath. This option is enabled by
default, and causes the X server to always append the default font path
(defined at compile time) to the font path for the server. This will allow
people to specify additional font paths if they want without breaking
their font path, thus hopefully avoiding ye olde "fixed front" problem.
Because this option is a ServerFlag option, the ServerFlags need to be
processed before the files section of the config file, so swap the order
that they are processed.
Provide default modules that may be overrided easily. Previously the
server would load a set of default modules, but only if none were
specified in the xorg.conf, or if you didn't have a xorg.conf at all. This
patch provides a default set and you can add only the "Load" instructions
to xorg.conf that you want without losing the defaults. Similarly, if you
don't want to load a module that's loaded by default, you can add "Disable
modulename" to your xorg.conf (see man xorg.conf in this release for
details). This allows for a minimal "Modules" section, where the user only
need specify what they want to be different. See bug #10541 for more.
The list of default modules is taken from the set loaded by default when
there was a xorg.conf containing no "Modules" section.
A potential problem for some users is that some users disable a module,
most notably DRI, by commenting out the "Load" line in their xorg.conf.
This needs to be changed to an uncommented "Disable" line, as DRI is
loaded by default.
Formerly we sized an array with a compile time constant, then initialized
its size to the same constant, but the Linux PCI init code would increase
that "constant". So if you happened to have more than 128 PCI devices,
you'd happily scribble into whatever variables happened to be in .bss
after that array.
Only really fixed for Linux atm. Other OSes will simply (still) fail to
work on video devices above the 128th PCI device.
SourceValidate is used exclusively by the software cursor code to pull the
cursor off of the screen before using the screen as a source operand. This
eliminates the software cursor from the frame buffer while painting the
rotated image though. Disabling this function by temporarily setting the
screen function pointer to NULL causes the cursor image to be captured.
(cherry picked from commit 05e1c45ade)
Setting a mode on an unrotated CRTC was causing all of the rotation updates
to be disabled; the loop looking for active rotation wasn't actually looking
at each crtc, it was looking at the modified crtc many times.
(cherry picked from commit 8b217dee3a)
Option "Enable" "True" will force the server to enable an output at startup
time, even if the output is not connected. This also causes the default
modes to be added for this output, allowing even sync ranges to be used to
pick out standard modes.
(cherry picked from commit a3d73ba2cb)
By default, use the screen monitor section for output 0, however, a driver
can change which output gets the screen monitor by calling
xf86OutputUseScreenMonitor.
(cherry picked from commit f4a8e54caf)
The entity (device) has a locking SAREA and a master file descriptor
that optionally isn't closed between server generation.
The locking SAREA contains the device hardware lock.
Each DRI screen creates an new SAREA containing the drawable lock,
drawable-and private info, the drawable SAREA.
The first screen optionally shares its drawable SAREA with the
device SAREA.
Default is to close the master descriptor between server generations,
and to share the drawable SAREA of the first screen with the device locking
SAREA. Thus we should (hopefully) have full backwards compatibility.
Mesa changes to support single-device multiple screens are pending.
This Acer monitor reports support for 75hz refresh via EDID, and yet when
that rate is delivered, the monitor does not sync and reports out of range.
Use the existing 60hz quirk for this monitor.
(cherry picked from commit 1328a288e9)
By the time CloseScreen gets called, we can't call ProcessInputEvents, as
the event queue will get unhappy. So just unregister our hooks instantly,
and hope that they don't get called.
xf86SetSingleMode tries to resize all crtcs to match the selected mode. When
a CRTC has no matching mode, it now disables the CRTC (instead of crashing).
Also, poke the RandR extension when xf86SetSingleMode is done so that
appropriate events can be delivered, and so that future RandR queries return
correct information.
(cherry picked from commit dc6c4f6989)
/sys/devices reflects the bus topology, and we don't care that much.
Easier (and more reliable) to just look in /sys/bus/pci/devices, which
is a flat view.
When we see an evdev or vmmouse section, assume that it's a mouse, and
don't add a default mouse device. This will break users who have an
evdev keyboard section but no mouse, and want the mouse to get added
by default.
Now, fbcmap_mi.c contains the fb functions which just wrap mi functions.
Previously, these were in fbcmap.c and compiled when XFree86Server was defined.
Now, clients of fbcmap should either use fbcmap.c or fbcmap_mi.c and not worry
about setting the XFree86Server symbol.
Additionally, protect libcw setup behind checks for Render, to avoid
segfaulting if Render isn't available (xnest).
The previous setup was an ABI-preserving dance, which is better nuked now.
Now, anything that needs libcw must explicitly initialize it, and
miDisableCompositeWrapper (previously only called by EXA and presumably binary
drivers) is gone.
Yes, two changes in one commit. Sorry 'bout that.
The first change ensures that when pending property values have been
changed, a mode set to the current mode will actually do something, rather
than being identified as a no-op. In addition, the driver no longer needs to
manage the migration of pending to current values, that is handled both
within the xf86 mode setting code (to deal with non-RandR changes) as well
as within the RandR extension itself.
The second change eliminates the two-call Create/AttachScreen stuff that was
done in a failed attempt to create RandR resources before the screen
structures were allocated. Merging these back into the Create function is
cleaner.
(cherry picked from commit 57e87e0d00)
Conflicts:
randr/randrstr.h
randr/rrcrtc.c
I think master and server-1.3-branch are more in sync now.
desiredX and desiredY were not recorded during xf86InitialConfiguration.
desiredX, desiredY and desiredRotation were not recorded during
xf86SetSingleMode.
(cherry picked from commit 36e5227215)
Pending Properties take effect when the driver says they do, so provide an
API to tell DIX when a property effect is made. Also, allow driver
to reject property values in RRChangeOutputProperty.
(cherry picked from commit 8eb288fbd6)
The rotation state is stored in the xf86_config structure which is not
re-initialized at server reset time. Clean it up at CloseScreen time.
(cherry picked from commit f8db7665dc)
The former <X11/extensions/XKBsrv.h> has been pulled into the server now as
include/xkbsrv.h, and the world updated to look for it in the new place,
since it made no sense to define server API in an extension header. Any
further work along this line will need to do similar things with XKBgeom.h
and friends.
The DDC code sets the I2C timeouts to VESA standards, except that it had an
extra setting of the ByteTimeout value which was wrong (off by a factor of
50). Removing this should help DDC work on many more monitors. Note that the
Intel driver duplicated these settings, along with the error. Yay for cult
and paste coding.
The xf86 mode setting code was mis-using this field to try and store a
pointer to a DisplayModeRec, however, each output has its own copy of every
DisplayModeRec leaving the one in in the RRModeRec devPrivate field pointing
at a random DisplayModeRec.
Instead of attempting to rectify this, eliminating the devPrivate entirely
turned out to be very easy; the DDX code now accepts an arbitrary RRModeRec
structure and set that to the hardware, converting it on the fly to a
DisplayModeRec as needed.
(cherry picked from commit 3506b9376c)
The RandR protocol spec has several requests in support of user-defined
modes, but the implementation was stubbed out inside the X server. Fill out
the DIX portion and start on the xf86 DDX portion. It might be necessary to
add more code to the DDX to insert the user-defined modes into the output
mode list.
(cherry picked from commit 63cc2a51ef)
Conflicts:
randr/randrstr.h
Updated code to work in master with recent security API changes.
Rotation block handler was re-registering the rotation damage structure,
creating an infinite loop in the damage code. Track registration of the
damage structure to avoid this.
(cherry picked from commit b14f003b0e)
xf86_reload_cursors is supposed to be called from the crtc mode setting
commit hook; as that happens during server initialization, check for this
case.
(cherry picked from commit 5b77bf2d02)
This moves most of the cursor management code out of the intel driver and
into the general server code. Of course, the hope is that this code will be
useful for other driver writers as well.
Check out xf86Crtc.h for the usage information, making sure you add the
needed hooks to the crtc funcs structure for your driver.
(cherry picked from commit 4d81c99a46)