Xprt links libfb, which now uses pixman. Update configure.ac to
require module $PIXMAN for XPRINT.
Also, use $(top_builddir) to reference libfb.la and other local
libraries, rather than using the relative reference ../..
Major stylistic cleanups, greatly expanded cross-reference ("SEE ALSO")
section and some typo fixes.
This patch by Branden Robinson. Forward-ported by Fabio M. Di Nitto.
When the root window changed size, xf86XVFillKeyHelper would not revalidate
the GC, leaving the clip at the old size causing lossage (and possibly
memory corruption if the screen and frame buffer shrank).
Fixed by just using a scratch GC; saving memory, eliminating bugs and
shrinking the code.
To be used by AIGLX for GLX_EXT_texture_from_pixmap without several data copies.
The texOffsetStart hook must make sure that the given pixmap is accessible by
the GPU for texturing and return an 'offset' that can be used by the 3D
driver for that purpose.
The texOffsetFinish hook is called when the pixmap is no longer being used for
texturing.
DRI uses a non-screen block/wakeup handler which will be executed after the
screen block handler finishes. To ensure that the rotation block handler is
executed under the DRI lock, dynamically wrap the screen block handler for
rotation.
Leaving devices enabled during server startup can cause problems during the
initial mode setting in the server, especially when they are used for
different purposes by the X server than by the BIOS. Disabling all of them
before any mode setting is attempted provides a stable base upon which the
remaining mode setting operations can be built.
The code in hw/xfree86/os-support/bus/sparcPci.c:simbaCheckBus()
is trying to mimmick VGA routing by disabling I/O space responses
behind the Simba PCI-PCI controller.
Unfortunately, doing this also happens to disable access to the
IDE controller I/O space registers, thus crashing the system. The
granularity of the I/O disabling in the Simba controller is not
fine enough to disable VGA without also disabling the IDE controller
registers.
When the modules section is parsed, if a module is set to be loaded by
default, this will be logged. If it is redundantly specified in xorg.conf,
this will also be noted. None of this logging will happen if the xorg.conf
lacks a modules section.
This provides a new option, UseDefaultFontPath. This option is enabled by
default, and causes the X server to always append the default font path
(defined at compile time) to the font path for the server. This will allow
people to specify additional font paths if they want without breaking
their font path, thus hopefully avoiding ye olde "fixed front" problem.
Because this option is a ServerFlag option, the ServerFlags need to be
processed before the files section of the config file, so swap the order
that they are processed.
Provide default modules that may be overrided easily. Previously the
server would load a set of default modules, but only if none were
specified in the xorg.conf, or if you didn't have a xorg.conf at all. This
patch provides a default set and you can add only the "Load" instructions
to xorg.conf that you want without losing the defaults. Similarly, if you
don't want to load a module that's loaded by default, you can add "Disable
modulename" to your xorg.conf (see man xorg.conf in this release for
details). This allows for a minimal "Modules" section, where the user only
need specify what they want to be different. See bug #10541 for more.
The list of default modules is taken from the set loaded by default when
there was a xorg.conf containing no "Modules" section.
A potential problem for some users is that some users disable a module,
most notably DRI, by commenting out the "Load" line in their xorg.conf.
This needs to be changed to an uncommented "Disable" line, as DRI is
loaded by default.
Add RawDeviceEvent (pointers only for now).
This commit changes the event queue to use EventLists instead of xEvent
arrays. Only EQ is affected, event delivery still uses xEvent* (look for
comment in mieqProcessInputEvent).
RawDeviceEvents deliver driver information to the client, without clipping or
acceleration.
Requires moving the spriteTrace into the DeviceIntRec and adjusting a few
functions to take in device argument, most notably XYToWindow().
Cursor rendering on the second screen is busted.
Formerly we sized an array with a compile time constant, then initialized
its size to the same constant, but the Linux PCI init code would increase
that "constant". So if you happened to have more than 128 PCI devices,
you'd happily scribble into whatever variables happened to be in .bss
after that array.
Only really fixed for Linux atm. Other OSes will simply (still) fail to
work on video devices above the 128th PCI device.
SourceValidate is used exclusively by the software cursor code to pull the
cursor off of the screen before using the screen as a source operand. This
eliminates the software cursor from the frame buffer while painting the
rotated image though. Disabling this function by temporarily setting the
screen function pointer to NULL causes the cursor image to be captured.
(cherry picked from commit 05e1c45ade)
Setting a mode on an unrotated CRTC was causing all of the rotation updates
to be disabled; the loop looking for active rotation wasn't actually looking
at each crtc, it was looking at the modified crtc many times.
(cherry picked from commit 8b217dee3a)
I've managed to solve my own bug (#10545) by applying the following
patch to the xserver.
Please apply.
<Conspiracy mode on>
This monitor is "Vista Certified". I wonder if this is a pure coincidence...
<Conspiracy mode off>
With kind regards
Erik Andrén
(cherry picked from commit a63704f14a)
Option "Enable" "True" will force the server to enable an output at startup
time, even if the output is not connected. This also causes the default
modes to be added for this output, allowing even sync ranges to be used to
pick out standard modes.
(cherry picked from commit a3d73ba2cb)
By default, use the screen monitor section for output 0, however, a driver
can change which output gets the screen monitor by calling
xf86OutputUseScreenMonitor.
(cherry picked from commit f4a8e54caf)
The entity (device) has a locking SAREA and a master file descriptor
that optionally isn't closed between server generation.
The locking SAREA contains the device hardware lock.
Each DRI screen creates an new SAREA containing the drawable lock,
drawable-and private info, the drawable SAREA.
The first screen optionally shares its drawable SAREA with the
device SAREA.
Default is to close the master descriptor between server generations,
and to share the drawable SAREA of the first screen with the device locking
SAREA. Thus we should (hopefully) have full backwards compatibility.
Mesa changes to support single-device multiple screens are pending.
This Acer monitor reports support for 75hz refresh via EDID, and yet when
that rate is delivered, the monitor does not sync and reports out of range.
Use the existing 60hz quirk for this monitor.
(cherry picked from commit 1328a288e9)
By the time CloseScreen gets called, we can't call ProcessInputEvents, as
the event queue will get unhappy. So just unregister our hooks instantly,
and hope that they don't get called.
xf86SetSingleMode tries to resize all crtcs to match the selected mode. When
a CRTC has no matching mode, it now disables the CRTC (instead of crashing).
Also, poke the RandR extension when xf86SetSingleMode is done so that
appropriate events can be delivered, and so that future RandR queries return
correct information.
(cherry picked from commit dc6c4f6989)
/sys/devices reflects the bus topology, and we don't care that much.
Easier (and more reliable) to just look in /sys/bus/pci/devices, which
is a flat view.
Improve memory usage by allocating the sprite's memory only to devices that
actually have a sprite and provide means to remove a device's cursor from the
screen (more hotplugging, yay!).
This commit breaks ScreenRec's ABI.
When we see an evdev or vmmouse section, assume that it's a mouse, and
don't add a default mouse device. This will break users who have an
evdev keyboard section but no mouse, and want the mouse to get added
by default.
Now, fbcmap_mi.c contains the fb functions which just wrap mi functions.
Previously, these were in fbcmap.c and compiled when XFree86Server was defined.
Now, clients of fbcmap should either use fbcmap.c or fbcmap_mi.c and not worry
about setting the XFree86Server symbol.
It seems that the changes to X input exposed a problem that wasn't detected
before. The axis clipping code in GetPointerEvents() uses those limits to
constrain the pointer's coordinate range. The max was zero so the pointer
couldn't move.
Use new dmxCoreMotion2() function which enqueues motion events with
GetPointerEvents()/mieqEnqueue().
The clipAxis() code in GetPointerEvents() is causing some grief. The
limits seem to have always been (0,0) according to the original calls
to InitValuatorAxisStruct() in dmxinputinit.c.
Terrible hack for now: Call InitValuatorAxisStruct() with hard-coded max
values of 1280 (my screen width).
Calloc cursor struct to ensure devPrivates are zeroed out and don't
increase the refcnt for devices automatically when allocating a new
cursor. Use new DeviceIsPointerType() to detect if device is a pointer
_before_ device has been activated and can thus be identified and set
up grab functions accordingly. This way we can increase the refcnt
when we get a pointer grab.
Additionally, protect libcw setup behind checks for Render, to avoid
segfaulting if Render isn't available (xnest).
The previous setup was an ABI-preserving dance, which is better nuked now.
Now, anything that needs libcw must explicitly initialize it, and
miDisableCompositeWrapper (previously only called by EXA and presumably binary
drivers) is gone.
Yes, two changes in one commit. Sorry 'bout that.
The first change ensures that when pending property values have been
changed, a mode set to the current mode will actually do something, rather
than being identified as a no-op. In addition, the driver no longer needs to
manage the migration of pending to current values, that is handled both
within the xf86 mode setting code (to deal with non-RandR changes) as well
as within the RandR extension itself.
The second change eliminates the two-call Create/AttachScreen stuff that was
done in a failed attempt to create RandR resources before the screen
structures were allocated. Merging these back into the Create function is
cleaner.
(cherry picked from commit 57e87e0d00)
Conflicts:
randr/randrstr.h
randr/rrcrtc.c
I think master and server-1.3-branch are more in sync now.
desiredX and desiredY were not recorded during xf86InitialConfiguration.
desiredX, desiredY and desiredRotation were not recorded during
xf86SetSingleMode.
(cherry picked from commit 36e5227215)
Pending Properties take effect when the driver says they do, so provide an
API to tell DIX when a property effect is made. Also, allow driver
to reject property values in RRChangeOutputProperty.
(cherry picked from commit 8eb288fbd6)
The rotation state is stored in the xf86_config structure which is not
re-initialized at server reset time. Clean it up at CloseScreen time.
(cherry picked from commit f8db7665dc)
The former <X11/extensions/XKBsrv.h> has been pulled into the server now as
include/xkbsrv.h, and the world updated to look for it in the new place,
since it made no sense to define server API in an extension header. Any
further work along this line will need to do similar things with XKBgeom.h
and friends.
The DDC code sets the I2C timeouts to VESA standards, except that it had an
extra setting of the ByteTimeout value which was wrong (off by a factor of
50). Removing this should help DDC work on many more monitors. Note that the
Intel driver duplicated these settings, along with the error. Yay for cult
and paste coding.
The xf86 mode setting code was mis-using this field to try and store a
pointer to a DisplayModeRec, however, each output has its own copy of every
DisplayModeRec leaving the one in in the RRModeRec devPrivate field pointing
at a random DisplayModeRec.
Instead of attempting to rectify this, eliminating the devPrivate entirely
turned out to be very easy; the DDX code now accepts an arbitrary RRModeRec
structure and set that to the hardware, converting it on the fly to a
DisplayModeRec as needed.
(cherry picked from commit 3506b9376c)
The RandR protocol spec has several requests in support of user-defined
modes, but the implementation was stubbed out inside the X server. Fill out
the DIX portion and start on the xf86 DDX portion. It might be necessary to
add more code to the DDX to insert the user-defined modes into the output
mode list.
(cherry picked from commit 63cc2a51ef)
Conflicts:
randr/randrstr.h
Updated code to work in master with recent security API changes.
dix: IsPointerDevice and IsKeyboardDevice, use same ways to identify type
of device as XI does for the XListInputDevices reply.
Autopair each non-pointer device with VCP when activating, pair with
real device after activation.
Don't return non-keyboard devices when calling GetPairedKeyboard or
PickKeyboard, otherwise we segfault for 'evdev brain'.
Rotation block handler was re-registering the rotation damage structure,
creating an infinite loop in the damage code. Track registration of the
damage structure to avoid this.
(cherry picked from commit b14f003b0e)
xf86_reload_cursors is supposed to be called from the crtc mode setting
commit hook; as that happens during server initialization, check for this
case.
(cherry picked from commit 5b77bf2d02)
This moves most of the cursor management code out of the intel driver and
into the general server code. Of course, the hope is that this code will be
useful for other driver writers as well.
Check out xf86Crtc.h for the usage information, making sure you add the
needed hooks to the crtc funcs structure for your driver.
(cherry picked from commit 4d81c99a46)
otherwise a Xi grab may overwrite or release a core grab.
Replace grab and associates with coreGrab and deviceGrab structures,
adjust rest of dix/Xi/etc to compile.
xfree86: Don't check for core devices, we'll have the virtual ones anyway.
If we check, the first mouse device is duplicated and sends
double events.
The length of the Xprint font file NewCenturySchlbk-BoldItalic.pmf
pushes the full path over the traditional 100 character limit for
tarballs (when module version number is included). Shorten it to
NewCentSchlbk-BoldItal.pmf to get back below the limit and rename
other font files in that family to match.
