When a user specifies the position of an output for which no modes exist
(for whatever reason) assume that the width and height of this output
is 0. The result will be the same as if this output isn't taken into
consideration at all and thus should be sane. It will prevent a segfault
when trying to determine the width and height of a non-existent mode.
Also merge sun_bios.c into sun_vid.c and upstream Solaris patch to
keep aperture device open, to allow mappings to occur after X server
has given up uid 0.
Maybe one day I stop doing stupid patches like
a3a7c12fcf.
So, if X < low, reset to low, and _not_ to high.
If X > high, reset to high, and _not_ to low.
This consists of two parts:
In the implicit server layout, ignore those drivers when looking for a core
device.
And after finishing the server layout, run through the list of devices and
remove any that use mouse or kbd.
AEI is mutually exclusive with the kbd and mouse drivers, so pick either - or.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The precedence of == is higher than that of &, so that code was
probably buggy.
xf86Init.c: In function 'DoModalias':
xf86Init.c:300: warning: suggest parentheses around comparison in operand of &
xf86Init.c:304: warning: suggest parentheses around comparison in operand of &
xf86Init.c:308: warning: suggest parentheses around comparison in operand of &
xf86Init.c:136: warning: function declaration isn't a prototype
xf86Init.c:243: warning: function declaration isn't a prototype
xf86Init.c:249: warning: function declaration isn't a prototype
xaaInit.c: In function 'XAAInit':
xaaInit.c:201: warning: implicit declaration of function 'miInitializeCompositeWrapper'
xaaInit.c:201: warning: nested extern declaration of 'miInitializeCompositeWrapper'
Add missing includes to fix the following warnings:
xf86DGA.c: In function 'DGAProcessKeyboardEvent':
xf86DGA.c:1050: warning: implicit declaration of function 'UpdateDeviceState'
xf86DGA.c:1050: warning: nested extern declaration of 'UpdateDeviceState'
xf86Xinput.c: In function 'xf86ActivateDevice':
xf86Xinput.c:303: warning: implicit declaration of function 'AssignTypeAndName'
xf86Xinput.c:303: warning: nested extern declaration of 'AssignTypeAndName'
xf86Xinput.c:311: warning: implicit declaration of function 'DeviceIsPointerType'
xf86Xinput.c:311: warning: nested extern declaration of 'DeviceIsPointerType'
xf86Xinput.c:324: warning: implicit declaration of function 'XkbSetExtension'
xf86Xinput.c:324: warning: nested extern declaration of 'XkbSetExtension'
Add automatic detection of the graphic driver to load for sbus devices.
This allows xorg to work on those devices without a "Device" section.
Debian bug#483942.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Also set AutoAddDevices and AutoEnableDevices to their defaults.
And in doing so, switch the rest of the defaults over to named intializers.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Usually, the console is set to RAW in the kbd driver. If we hotplug all input
devices (i.e. the evdev driver for keyboards) and the console is left as-is.
As a result, the evdev driver must put an EVIOCGRAB on the device to avoid
characters leaking onto the console. This again breaks many things, amongst
them lirc, in-kernel mouse button emulation and HAL.
This patch sets the console to RAW if AllowEmptyInput is on.
Use-cases:
1. AEI is off
1.1. Only kbd driver is used - behaviour as-is.
1.2. kbd and evdev driver is used: if evdev does not grab the device,
duplicate events are generated.
2. AEI is on
2.1. Only evdev driver is used - behaviour as-is, but evdev does not need
to grab the device anymore.
2.2. evdev and kbd are used: duplicate key events are generated if evdev
does not grab the device.
1.2 is a marginal use-case that can be fixed by adding a "grab" option to the
evdev driver (update of xorg.conf is needed).
2.2 is an issue. If we have no ServerLayout section, AEI is on, but devices
specified in the xorg.conf are still added [1], resulting in duplicate events.
This is a common configuration and needs sorting out.
[1] 2eaed4a10f
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
I've seen about one case in three years where this has actually been
correlated with the real cause of failure, and we've trained people to
freak out about X_WARNING, so let's be less alarmist.
Very cute, Samsung, not only do you claim to be 16cm by 9cm in the
global size record, you also claim to be 160mm by 90mm in the detailed
timings. Grrr.
NIDR should be used to create a new SD from e.g. within a driver.
DIDR should be used to remove a device from the server.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
If you need to bail out the server, use Ctrl-Alt-Fx, or enable zapping
if it bothers you that much. If Ctrl-Alt-Fx is broken, nag me until
it's permanently fixed.
The nvidia driver currently uses these hooks to work around problems where RAC
will disable access to the hardware at unexpected times. This change restores
these hooks until we can come up with a better API for working around RAC.
This reverts commit c1df4fbede.
The nvidia driver currently uses these callbacks to work around problems where
RAC will disable access to the hardware at unexpected times. This change
restores these hooks until we can come up with a better API for working around
RAC.
This reverts commit d7c0ba2e9e.
Conflicts:
hw/xfree86/loader/xf86sym.c
Some BIOSes (hi XGI!) will attempt to enumerate the PCI bus by asking
for the config space of every possible device number. This despite
perfectly functional BIOS methods to enumerate the bus exactly.
If anyone can come up with an example of a bus where:
- both i/o and memory resources are addressable
- access to them can be controlled
- but they can't be controlled independently
then by all means, reinstate this logic.
Under the terms of version 1.1, "once Covered Code has been published
under a particular version of the License, Recipient may, for the
duration of the License, continue to use it under the terms of that
version, or choose to use such Covered Code under the terms of any
subsequent version published by SGI."
FreeB 2.0 license refers to "dates of first publication". They are here
taken to be 1991-2000, as noted in the original license text:
** Original Code. The Original Code is: OpenGL Sample Implementation,
** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
** Copyright in any portions created by third parties is as indicated
** elsewhere herein. All Rights Reserved.
Official FreeB 2.0 text:
http://oss.sgi.com/projects/FreeB/SGIFreeSWLicB.2.0.pdf
As always, this code has not been tested for conformance with the OpenGL
specification. OpenGL conformance testing is available from
http://khronos.org/ and is required for use of the OpenGL logo in
product advertising and promotion.
The check can fail because the output from FBIOGET_VSCREENINFO is used to set
Clock in fbdev2xfree_timing(). Then in fbdevHWSetMode(), xfree2fbdev_timing()
is called which sets the pixclock based on Clock. The resulting circle results
in slight rounding errors, causing the comparision check in fbdev_modes_equal
to fail.
- Redo damage naming for more consistency.
- Call post submission functions only where appropriate.
- EXA can now live without it's odd damage workarounds.
No point warning about missing driver hooks, that just means the person
who gave you the driver is inept. Might as well just crash. Also,
just name anonymous screens as screen%d instead of failing after the 36th
screen. Bonus points if you can figure out what the failure mode would
be on the 36th screen, and what the effective screen limit was.
There is no way this code can have been building for anyone since pciaccess
was merged. BSD and Linux were already using OS code on sparc, the only
people who could want this are Solaris, who should be using pciaccess
anyway.
This code was effectively only used in ix86Pci.c to select PCI config
access type. Nobody should be using that path anymore, in the glorious
pciaccess world; kernel services should get it right for you.
the defaults from InitVelocityData() or hypothetic driver-side changes
are now respected, not overridden.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device doesn't have any BARs then it's just a stub for some
lame operating systems that need one PCI device per output for
multihead. No point in warning about it.
It's all a bit wonky since both sis(4) and xgi(4) claim to support the
Volari Z7 and V5/8 (0x0020 and 0x0040), so let's side with xgi(4), why
not. Note that the V3 (not V3XT) identifies itself as a trident chip.
Put out a warning if xorg.conf has InputDevice sections, but these aren't
referenced in the used ServerLayout. This is only performed if AllowEmptyInput
is enabled.
The reason behind this is that the server used to auto-add the first
mouse/keyboard sections if none where referenced. Now, with HAL and AEI
enabled by default, setups that relied on this auto-adding break and are left
without input devices. The least we can do is warn them.
