Commit Graph

1317 Commits

Author SHA1 Message Date
Peter Dillinger
003e72b201 Use size_t for filter APIs, protect against overflow (#7726)
Summary:
Deprecate CalculateNumEntry and replace with
ApproximateNumEntries (better name) using size_t instead of int and
uint32_t, to minimize confusing casts and bad overflow behavior
(possible though probably not realistic). Bloom sizes are now explicitly
capped at max size supported by implementations: just under 4GiB for
fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This
hardening could help to set up for fuzzing.

Also, since RocksDB only uses this information as an approximation
for trying to hit certain sizes for partitioned filters, it's more important
that the function be reasonably fast than for it to be completely
accurate. It's hard enough to be 100% accurate for Ribbon (currently
reversing CalculateSpace) that adding optimize_filters_for_memory
into the mix is just not worth trying to be 100% accurate for num
entries for bytes.

Also:
- Cleaned up filter_policy.h to remove MSVC warning handling and
potentially unsafe use of exception for "not implemented"
- Correct the number of entries limit beyond which current Ribbon
implementation falls back on Bloom instead.
- Consistently use "num_entries" rather than "num_entry"
- Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially
obsolete from general implementation
BuiltinFilterBitsBuilder::CalculateNumEntries.
- Fix filter_bench to skip some tests that don't make sense when only
one or a small number of filters has been generated.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726

Test Plan:
expanded existing unit tests for CalculateSpace /
ApproximateNumEntries. Also manually used filter_bench to verify Legacy and
fv=5 Bloom size caps work (much too expensive for unit test). Note that
the actual bits per key is below requested due to space cap.

    $ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate
    ...
    Total size (MB): 511.992
    Bits/key stored: 16.777
    ...
    $ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000
    ...
    Total size (MB): 4096
    Bits/key stored: 17.1799
    ...
    $

Reviewed By: jay-zhuang

Differential Revision: D25239800

Pulled By: pdillinger

fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
2020-12-11 22:18:12 -08:00
anand76
8a1488efbf Ensure that MultiGet works properly with compressed cache (#7756)
Summary:
Ensure that when direct IO is enabled and a compressed block cache is
configured, MultiGet inserts compressed data blocks into the compressed
block cache.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7756

Test Plan: Add unit test to db_basic_test

Reviewed By: cheng-chang

Differential Revision: D25416240

Pulled By: anand1976

fbshipit-source-id: 75d57526370c9c0a45ff72651f3278dbd8a9086f
2020-12-09 17:01:13 -08:00
Levi Tamasi
61932cdf1d Add blob support to DBIter (#7731)
Summary:
The patch adds iterator support to the integrated BlobDB implementation.
Whenever a blob reference is encountered during iteration, the corresponding
blob is retrieved by calling `Version::GetBlob`, assuming the `expose_blob_index`
(formerly `allow_blob`) flag is *not* set. (Note: the flag is set by the old stacked
BlobDB implementation, which has its own blob file handling/blob retrieval logic.)

In addition, `DBIter` now uniformly returns `Status::NotSupported` with the error
message `"BlobDB does not support merge operator."` when encountering a
blob reference while performing a merge (instead of potentially returning a
message that implies the database should be opened using the stacked BlobDB's
`Open`.)

TODO: We can implement support for lazily retrieving the blob value (or in other
words, bypassing the retrieval of blob values based on key) by extending the `Iterator`
API with a new `PrepareValue` method (similarly to `InternalIterator`, which already
supports lazy values).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7731

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D25256293

Pulled By: ltamasi

fbshipit-source-id: c39cd782011495a526cdff99c16f5fca400c4811
2020-12-04 21:29:38 -08:00
Jay Zhuang
9e1640403a Exclude timestamp from prefix extractor (#7668)
Summary:
Timestamp should not be included in prefix extractor, as we discussed here: https://github.com/facebook/rocksdb/pull/7589#discussion_r511068586

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7668

Test Plan: added unittest

Reviewed By: riversand963

Differential Revision: D24966265

Pulled By: jay-zhuang

fbshipit-source-id: 0dae618c333d4b7942a40d556535a1795e060aea
2020-12-01 14:07:15 -08:00
Andrew Kryczka
dd6b7fc520 Return Status from MemTable mutation functions (#7656)
Summary:
This PR updates `MemTable::Add()`, `MemTable::Update()`, and
`MemTable::UpdateCallback()` to return `Status` objects, and adapts the
client code in `MemTableInserter`. The goal is to prepare these
functions for key-value checksum, where we want to verify key-value
integrity while adding to memtable. After this PR, the memtable mutation
functions can report a failed integrity check by returning `Status::Corruption`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7656

Reviewed By: riversand963

Differential Revision: D24900497

Pulled By: ajkr

fbshipit-source-id: 1a7e80581e3774676f2bbba2f0a0b04890f40009
2020-11-23 16:29:04 -08:00
anand76
7c19d43883 Fix initialization order of DBOptions and kHostnameForDbHostId (#7702)
Summary:
Fix initialization order of DBOptions and kHostnameForDbHostId by making the initialization of the latter static rather than dynamic.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7702

Reviewed By: ajkr

Differential Revision: D25111633

Pulled By: anand1976

fbshipit-source-id: 7afad834a66e40bcd8694a43b40d378695212224
2020-11-19 22:39:40 -08:00
Yanqin Jin
84a700819e Fix the logic of setting read_amp_bytes_per_bit from OPTIONS file (#7680)
Summary:
Instead of using `EncodeFixed32` which always serialize a integer to
little endian, we should use the local machine's endianness when
populating a native data structure during options parsing.
Without this fix, `read_amp_bytes_per_bit` may be populated incorrectly
on big-endian machines.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7680

Test Plan: make check

Reviewed By: pdillinger

Differential Revision: D24999166

Pulled By: riversand963

fbshipit-source-id: dc603cff6e17f8fa32479ce6df93b93082e6b0c4
2020-11-17 00:44:30 -08:00
Yanqin Jin
9aa1b1dc19 Hack to load OPTIONS file for read_amp_bytes_per_bit (#7659)
Summary:
A temporary hack to work around a bug in 6.10, 6.11, 6.12, 6.13 and
6.14. The bug will write out 8 bytes to OPTIONS file from the starting
address of BlockBasedTableOptions.read_amp_bytes_per_bit which is
actually a uint32. Consequently, the value of read_amp_bytes_per_bit
written in the OPTIONS file is wrong. From 6.15, RocksDB will
try to parse the read_amp_bytes_per_bit from OPTIONS file as a uint32.
To be able to load OPTIONS file generated by affected releases before
the fix, we need to manually parse read_amp_bytes_per_bit with this hack.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7659

Test Plan:
Generate a db with current 6.14.fb (head at b6db05dbb5). Maybe use db_stress.

Checkout this PR, run
```
 ~/rocksdb/ldb --db=. --try_load_options --ignore_unknown_options idump --count_only
```
Expect success, and should not see
```
Failed: Invalid argument: Error parsing read_amp_bytes_per_bit:17179869184
```

Also
make check

Reviewed By: anand1976

Differential Revision: D24954752

Pulled By: riversand963

fbshipit-source-id: c7b802fc3e52acd050a4fc1cd475016122234394
2020-11-13 11:52:50 -08:00
Peter Dillinger
60af964372 Experimental (production candidate) SST schema for Ribbon filter (#7658)
Summary:
Added experimental public API for Ribbon filter:
NewExperimentalRibbonFilterPolicy(). This experimental API will
take a "Bloom equivalent" bits per key, and configure the Ribbon
filter for the same FP rate as Bloom would have but ~30% space
savings. (Note: optimize_filters_for_memory is not yet implemented
for Ribbon filter. That can be added with no effect on schema.)

Internally, the Ribbon filter is configured using a "one_in_fp_rate"
value, which is 1 over desired FP rate. For example, use 100 for 1%
FP rate. I'm expecting this will be used in the future for configuring
Bloom-like filters, as I expect people to more commonly hold constant
the filter accuracy and change the space vs. time trade-off, rather than
hold constant the space (per key) and change the accuracy vs. time
trade-off, though we might make that available.

### Benchmarking

```
$ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 34.1341
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
----------------------------
Mixed inside/outside queries...
  Single filter net ns/op: 18.7508
  Random filter net ns/op: 258.246
    Average FP rate %: 0.968672
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 130.851
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
----------------------------
Mixed inside/outside queries...
  Single filter net ns/op: 58.4523
  Random filter net ns/op: 363.717
    Average FP rate %: 0.952978
----------------------------
Done. (For more info, run with -legend or -help.)
```

168.166 / 238.488 = 0.705  -> 29.5% space reduction

130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction)

### Working around a hashing "flaw"

bloom_test discovered a flaw in the simple hashing applied in
StandardHasher when num_starts == 1 (num_slots == 128), showing an
excessively high FP rate.  The problem is that when many entries, on the
order of number of hash bits or kCoeffBits, are associated with the same
start location, the correlation between the CoeffRow and ResultRow (for
efficiency) can lead to a solution that is "universal," or nearly so, for
entries mapping to that start location. (Normally, variance in start
location breaks the effective association between CoeffRow and
ResultRow; the same value for CoeffRow is effectively different if start
locations are different.) Without kUseSmash and with num_starts > 1 (thus
num_starts ~= num_slots), this flaw should be completely irrelevant.  Even
with 10M slots, the chances of a single slot having just 16 (or more)
entries map to it--not enough to cause an FP problem, which would be local
to that slot if it happened--is 1 in millions. This spreadsheet formula
shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE)))

As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is
intended for CPU efficiency of filters with many more entries/slots than
kCoeffBits, a very reasonable work-around is to disallow num_starts==1
when !kUseSmash, by making the minimum non-zero number of slots
2*kCoeffBits. This is the work-around I've applied. This also means that
the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not
space-efficient for less than a few hundred entries. Because of this, I
have made it fall back on constructing a Bloom filter, under existing
schema, when that is more space efficient for small filters. (We can
change this in the future if we want.)

TODO: better unit tests for this case in ribbon_test, and probably
update StandardHasher for kUseSmash case so that it can scale nicely to
small filters.

### Other related changes

* Add Ribbon filter to stress/crash test
* Add Ribbon filter to filter_bench as -impl=3
* Add option string support, as in "filter_policy=experimental_ribbon:5.678;"
where 5.678 is the Bloom equivalent bits per key.
* Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom
* Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on
binary searching CalculateSpace (inefficient), so that subclasses
(especially experimental ones) don't have to provide an efficient
implementation inverting CalculateSpace.
* Minor refactor FastLocalBloomBitsBuilder for new base class
XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder,
which allows the latter to fall back on Bloom construction in some
extreme cases.
* Mostly updated bloom_test for Ribbon filter, though a test like
FullBloomTest::Schema is a next TODO to ensure schema stability
(in case this becomes production-ready schema as it is).
* Add some APIs to ribbon_impl.h for configuring Ribbon filters.
Although these are reasonably covered by bloom_test, TODO more unit
tests in ribbon_test
* Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data
for constructing the linear approximations in GetNumSlotsFor95PctSuccess.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658

Test Plan:
Some unit tests updated but other testing is left TODO. This
is considered experimental but laying down schema compatibility as early
as possible in case it proves production-quality. Also tested in
stress/crash test.

Reviewed By: jay-zhuang

Differential Revision: D24899349

Pulled By: pdillinger

fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
2020-11-12 20:46:14 -08:00
Yanqin Jin
cf9d8e45c0 Add full_history_ts_low_ to CompactionJob (#7657)
Summary:
https://github.com/facebook/rocksdb/issues/7556 enables `CompactionIterator` to perform garbage collection during compaction according
to a lower bound (user-defined) timestamp `full_history_ts_low_`.

This PR adds a data member `full_history_ts_low_` of type `std::string` to `CompactionJob`, and
`full_history_ts_low_` does not change during compaction. `CompactionJob` will pass a pointer to this
data member to the `CompactionIterator` used during compaction.

Also refactored compaction_job_test.cc to re-use some existing code, which is actually the majority of this PR.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7657

Test Plan: make check

Reviewed By: ltamasi

Differential Revision: D24913803

Pulled By: riversand963

fbshipit-source-id: 11ad5329ddac365667152e7b3b02f84182c0ca8e
2020-11-12 11:43:24 -08:00
mrambacher
c442f6809f Create a Customizable class to load classes and configurations (#6590)
Summary:
The Customizable class is an extension of the Configurable class and allows instances to be created by a name/ID.  Classes that extend customizable can define their Type (e.g. "TableFactory", "Cache") and  a method to instantiate them (TableFactory::CreateFromString).  Customizable objects can be registered with the ObjectRegistry and created dynamically.

Future PRs will make more types of objects extend Customizable.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/6590

Reviewed By: cheng-chang

Differential Revision: D24841553

Pulled By: zhichao-cao

fbshipit-source-id: d0c2132bd932e971cbfe2c908ca2e5db30c5e155
2020-11-11 15:10:41 -08:00
Huisheng Liu
16d103d35b fix read_amp_bytes_per_bit field size (#7651)
Summary:
The field in BlockBasedTableOptions is 4 bytes:
  // Default: 0 (disabled)
  uint32_t read_amp_bytes_per_bit = 0;

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7651

Reviewed By: ltamasi

Differential Revision: D24844994

Pulled By: riversand963

fbshipit-source-id: e2695e55532256ef8996dd6939cad06987a80293
2020-11-10 11:14:48 -08:00
Jay Zhuang
881e0dcc09 Fix MultiGet unable to query timestamp data issue (#7589)
Summary:
The filter query key should not contain timestamp. The timestamp is
stripped for Get(), but not MultiGet().

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7589

Reviewed By: riversand963

Differential Revision: D24494661

Pulled By: jay-zhuang

fbshipit-source-id: fc5ff40f9d683a89a760c6ff0ab3aed05a70c317
2020-11-03 09:45:41 -08:00
Yanqin Jin
394210f280 Remove unused includes (#7604)
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604

Test Plan: make check

Reviewed By: ajkr

Differential Revision: D24579392

Pulled By: riversand963

fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
2020-10-28 23:22:27 -07:00
Ramkumar Vadivelu
9a690a74e1 In ParseInternalKey(), include corrupt key info in Status (#7515)
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497

When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`

Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.

Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test

Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515

Reviewed By: ajkr

Differential Revision: D24240264

Pulled By: ramvadiv

fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
2020-10-28 10:12:58 -07:00
mrambacher
f35f7f2704 Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:

1.  The MockFileSystem class was split out from the MockEnv.  This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one).  The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.

2.  Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set.  To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).

3.  Updated the test framework to have a ROCKSDB_GTEST_SKIP macro.  This can be used to flag tests that are skipped.  Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).

I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV,  both, and neither under both MacOS and RedHat.  A few tests were disabled/skipped for the MEM/ENCRYPTED cases.  The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem.  (I will also push a change to disable those tests soon).  There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.

Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.

Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale.  I do not know how to do that, so if someone could write that job, it would be appreciated :)

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566

Reviewed By: zhichao-cao

Differential Revision: D24408980

Pulled By: jay-zhuang

fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
2020-10-27 10:33:09 -07:00
Ziyue Yang
1c78e4b235 Make parallel compression optimization code tidier (#6888)
Summary:
This commit makes https://github.com/facebook/rocksdb/issues/6262's code change tidier and easier to understand by:

1. Wrapping parallel compression initialization and termination into
   common methods;
2. Wrapping BlockRep initialization, push/pop into common methods;
3. Wrapping file size estimation into common methods;
4. Fixing function declarations that use non-const reference;
5. Fixing some uninitialized variables;
6. Fixing first_block data race;
7. Making BlockRep::status check in BlockBasedTableBuilder::Finish only present
if ok();
8. Making assert(ok()) in BlockBasedTableBuilder::CompressAndVerifyBlock only
present in non-parallel compression mode. In parallel compression mode,
compression will abort if status is not OK;
9. Eliminating potential data race caused by BlockBasedTableBuilder::GetStatus()
and BlockBasedTableBuilder::GetIOStatus() by returning status copy instead of
unprotected reference.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/6888

Reviewed By: ajkr

Differential Revision: D21957110

Pulled By: jay-zhuang

fbshipit-source-id: 3a29892f249209513f030349756cecd7736eae80
2020-10-22 11:05:25 -07:00
mrambacher
1eda625eab Revert Statuses returned from pre-Configurable options functions (#7563)
Summary:
Further refinement of the earlier PR.  Now the Status is NotFound with a subcode of PathNotFound. Also the existing functions for options parsing/loading are reverted to return InvalidArgument no matter in which way the user-provided arguments are deemed invalid.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7563

Reviewed By: zhichao-cao

Differential Revision: D24422491

Pulled By: ajkr

fbshipit-source-id: ba6b237cd0584d3f925c5ba0d349aeb8c250af67
2020-10-20 11:53:28 -07:00
Akanksha Mahajan
b4cd51d847 Fix for stress test failure (#7574)
Summary:
Ignore read error in 'FilePrefetchBuffer::TryReadFromCache' as status is ignored
and  bool value is returned. Return error if prefetch fails in
'PrefetchTail' as we have planned to return Prefetch failures to users.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7574

Test Plan:
make check -j64,
python -u tools/db_crashtest.py blackbox

Reviewed By: zhichao-cao

Differential Revision: D24408825

Pulled By: akankshamahajan15

fbshipit-source-id: feebda771415998253fbe54632f13e6e75b7a243
2020-10-20 09:13:42 -07:00
anand76
00751e4292 Add a host location property to TableProperties (#7479)
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479

Test Plan: Add new unit tests

Reviewed By: pdillinger

Differential Revision: D24340671

Pulled By: anand1976

fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
2020-10-19 11:38:48 -07:00
Levi Tamasi
e8cb32ed67 Introduce BlobFileCache and add support for blob files to Get() (#7540)
Summary:
The patch adds blob file support to the `Get` API by extending `Version` so that
whenever a blob reference is read from a file, the blob is retrieved from the corresponding
blob file and passed back to the caller. (This is assuming the blob reference is valid
and the blob file is actually part of the given `Version`.) It also introduces a cache
of `BlobFileReader`s called `BlobFileCache` that enables sharing `BlobFileReader`s
between callers. `BlobFileCache` uses the same backing cache as `TableCache`, so
`max_open_files` (if specified) limits the total number of open (table + blob) files.

TODO: proactively open/cache blob files and pin the cache handles of the readers in the
metadata objects similarly to what `VersionBuilder::LoadTableHandlers` does for
table files.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7540

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D24260219

Pulled By: ltamasi

fbshipit-source-id: a8a2a4f11d3d04d6082201b52184bc4d7b0857ba
2020-10-15 13:04:47 -07:00
Akanksha Mahajan
850cc0dbed Fix for clang_analyzer build failure in table_test (#7553)
Summary:
fix for clang_analyzer build failure in table_test because of
potential memory leak of memtable in case of ASSERT failure.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7553

Test Plan:
USE_CLANG=1 make analyze;
           make check -j64

Reviewed By: jay-zhuang

Differential Revision: D24295042

Pulled By: akankshamahajan15

fbshipit-source-id: e9ea184367970fff3b520e33f3ceebf28d66ac8d
2020-10-14 12:44:59 -07:00
Akanksha Mahajan
db87afbcb3 Return error if Get/Multi() fails in Prefetching Filter blocks (#7543)
Summary:
Right now all I/O failures under
PartitionFilterBlock::CacheDependencies() is swallowed. Return error in
case prefetch fails.

On returning error in PartitionedFilterBlockReader::CacheDependencies was causing stress test failure because PrefetchBuffer is initialized with enable_ = true, as result when PosixMmapReadableFile::Read is called from Prefetch, scratch is ignored causing buffer to fill with garbage values. Initializing prefetch buffer by CreatePrefetchBuffer that sets enable_ with !ioptions.allow_mmap_reads fixed the problem as it returns without prefetching data if allow_mmap_reads is set.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7543

Test Plan:
make check -j64;
python -u tools/db_crashtest.py --simple blackbox

Reviewed By: anand1976

Differential Revision: D24284596

Pulled By: akankshamahajan15

fbshipit-source-id: f3f0fd44b59dcf60645730436f28564a07884868
2020-10-14 10:45:36 -07:00
Zhichao Cao
16bff5370d Add plain_table_db_test to ASSERT_STATUS_CHECKED list (#7482)
Summary:
Add plain_table_db_test to ASSERT_STATUS_CHECKED list

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7482

Test Plan: ASSERT_STATUS_CHECKED=1 make -j48 plain_table_db_test

Reviewed By: riversand963

Differential Revision: D24034987

Pulled By: zhichao-cao

fbshipit-source-id: e61c937d55ded0947cc8936937362dafed572a60
2020-10-13 12:00:09 -07:00
Andrew Kryczka
75d3b6fdf0 Redesign block cache pinning API (#7520)
Summary:
The old flag-based APIs (`BlockBasedTableOptions::pin_l0_filter_and_index_blocks_in_cache` and `BlockBasedTableOptions::pin_top_level_index_and_filter`) were insufficient for our needs. For example, it was impossible to pin only unpartitioned meta-blocks, which could prevent block cache contention when turning on dictionary compression or during a migration to partitioned indexes/filters. It was also impossible to pin all meta-blocks in memory while having predictable memory usage via block cache. If we had continued adding flags to address these scenarios, they would have had significant overlap causing confusion. Instead, this PR deprecates the flags and starts a new API with non-overlapping options.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7520

Test Plan:
- new unit test
- added new options to stress/crash test and ran for a while: `$ python tools/db_crashtest.py blackbox --simple --max_key=1000000 -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 --interval=10 -value_size_mult=33 -column_families=1 -reopen=0`

Reviewed By: pdillinger

Differential Revision: D24200034

Pulled By: ajkr

fbshipit-source-id: 3fa7cfc71e7960f7a867511dd6ae5834dd73b13e
2020-10-11 14:58:24 -07:00
Akanksha Mahajan
24498ab1ec Add few unit test cases in ASSERT_STATUS_CHECKED (#7500)
Summary:
Add status enforcement for following tests:
  1. import_column_family_test
  2. memory_test
  3. table_test

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7500

Reviewed By: zhichao-cao

Differential Revision: D24095887

Pulled By: akankshamahajan15

fbshipit-source-id: db8e1ec595852df143fad78a0c07bfdd27dc3c84
2020-10-08 11:22:44 -07:00
Akanksha Mahajan
38d0a365e3 Add Stats for MultiGet (#7366)
Summary:
Add following stats for MultiGet in Histogram to get more insight on MultiGet.
    1. Number of index and filter blocks read from file as part of MultiGet
    request per level.
    2. Number of data blocks read from file per level.
    3. Number of SST files loaded from file system per level.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7366

Reviewed By: anand1976

Differential Revision: D24127040

Pulled By: akankshamahajan15

fbshipit-source-id: e63a003056b833729b277edc0639c08fb432756b
2020-10-07 13:28:48 -07:00
sdong
2496d3d4b8 Avoid to suppress status code in ~BlockBasedTableBuilder (#7507)
Summary:
We just used a hacky way to fix db_basic_test: suppress status code in ~BlockBasedTableBuilder. Rather, we should pass them back in Finish() and suppress them in Abandon().

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7507

Test Plan: Watch existing tests to succeed.

Reviewed By: riversand963

Differential Revision: D24119527

fbshipit-source-id: 71c4d4a81c0fd1c5595224692275f20f7759973a
2020-10-05 14:58:49 -07:00
Levi Tamasi
5d16325ce3 Revert "Return error if Get() fails in Prefetching Filter blocks (#7463)" (#7505)
Summary:
This reverts commit 7d503e66a9.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7505

Reviewed By: ajkr

Differential Revision: D24100875

Pulled By: ltamasi

fbshipit-source-id: 8705e3e6e8be4b4fd175ffdb031baa6530b61151
2020-10-03 18:38:04 -07:00
Yanqin Jin
758ead5df7 Enforce status check for corruption_test (#7453)
Summary:
Enforce status check for corruption_test.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7453

Test Plan:
```
ASSERT_STATUS_CHECKED=1 make corruption_test
./corruption_test
```

Reviewed By: jay-zhuang

Differential Revision: D24006862

Pulled By: riversand963

fbshipit-source-id: 664677caf4c3007a25cf565cec3d677f2dcea130
2020-10-02 22:11:00 -07:00
Akanksha Mahajan
7d503e66a9 Return error if Get() fails in Prefetching Filter blocks (#7463)
Summary:
Right now all I/O failures under
PartitionFilterBlock::CacheDependencies() is swallowed. Return error in
case prefetch fails.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7463

Test Plan: make check -j64

Reviewed By: anand1976

Differential Revision: D24008226

Pulled By: akankshamahajan15

fbshipit-source-id: b65d63b2d01465db92500b78de7ad58650ec9b3b
2020-10-02 19:40:43 -07:00
darionyaphet
f5e22ce607 fix dummy collector's name (#7442)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7442

Reviewed By: jay-zhuang

Differential Revision: D24011201

Pulled By: ajkr

fbshipit-source-id: 54f24c29875f7575612a780f15a42cda918d6641
2020-10-01 15:22:47 -07:00
sdong
7508175558 Introduce options.check_flush_compaction_key_order (#7467)
Summary:
Introduce an new option options.check_flush_compaction_key_order, by default set to true, which checks key order of flush and compaction, and fail the operation if the order is violated.
Also did minor refactor hash checking code, which consolidates the hashing logic to a vlidation class, where the key ordering logic is added.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7467

Test Plan: Add unit tests to validate the check can catch reordering in flush and compaction, and can be properly disabled.

Reviewed By: riversand963

Differential Revision: D24010683

fbshipit-source-id: 8dd6292d2cda8006054e9ded7cfa4bf405f0527c
2020-10-01 10:10:26 -07:00
darionyaphet
2af46f1011 Move break into block (#7468)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7468

Reviewed By: riversand963

Differential Revision: D24028736

Pulled By: ajkr

fbshipit-source-id: bd2b4b8d069491a16373d3d2705fddf7ebfe6723
2020-09-30 20:24:23 -07:00
Ramkumar Vadivelu
e04a50923d Change ParseInternalKey() to return Status instead of bool (#7457)
Summary:
Fixes https://github.com/facebook/rocksdb/issues/7430

Change ParseInternalKey() to return Status instead of bool.

db_bench (seekrandom) based before/after results with value size of 100 bytes and 16 bytes can be found at (tests ran on an udb server):
https://www.dropbox.com/s/47bwamdy5ozngph/PIK_ret_Status_results.xlsx?dl=0

![db_bench_results](https://user-images.githubusercontent.com/62277872/94642825-2a21a800-029a-11eb-88f2-124136c83fd3.png)

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7457

Reviewed By: ajkr

Differential Revision: D24002433

Pulled By: ramvadiv

fbshipit-source-id: ac253ecf577a29044c47c3fe254a01e71404c44c
2020-09-30 19:16:47 -07:00
Akanksha Mahajan
5997f6b17b Add Status check enforcement for unit tests (#7464)
Summary:
Add status check for unit tests : block_based_filter_block_test, block_fetcher_test, full_filter_block_test and partitioned_filter_block_test

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7464

Reviewed By: zhichao-cao

Differential Revision: D24011309

Pulled By: akankshamahajan15

fbshipit-source-id: d814803f94e8bb8b811ef170d20b22d52c1a3ff2
2020-09-30 12:48:05 -07:00
Jay Zhuang
1bdaef7a06 Status check enforcement for timestamp_basic_test (#7454)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7454

Reviewed By: riversand963

Differential Revision: D23981719

Pulled By: jay-zhuang

fbshipit-source-id: 01073f73e54c17067b886c4a2f179b2804198399
2020-09-29 18:23:27 -07:00
anand76
bd5d9e2a1d Fix misspelling of PartitionedIndexIterator (#7450)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7450

Reviewed By: zhichao-cao

Differential Revision: D23992811

Pulled By: anand1976

fbshipit-source-id: 71bd898aafce6a3add3c8cd86d9f0e0fb63860cf
2020-09-29 16:28:13 -07:00
sdong
d08a9005b7 Make db_basic_test pass assert status checked (#7452)
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452

Test Plan: See CI tests pass.

Reviewed By: zhichao-cao

Differential Revision: D23979764

fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
2020-09-29 09:49:04 -07:00
Andrew Kryczka
7a23a2175b enable Status check assertions for sst_file_reader_test (#7448)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7448

Reviewed By: jay-zhuang

Differential Revision: D23973281

Pulled By: ajkr

fbshipit-source-id: 90fe55f1db904f1a236f3f7994d0806b8d24282c
2020-09-28 15:13:15 -07:00
Levi Tamasi
30fb9dd50f Introduce a helper method UncompressData (#7434)
Summary:
The patch introduces a helper method in `util/compression.h` called `UncompressData`
that dispatches calls to the correct uncompression method based on type, and changes
`UncompressBlockContentsForCompressionType` and `Benchmark::Uncompress` in
`db_bench` so they are implemented in terms of the new method. This eliminates
some code duplication. (`Benchmark::Compress` is also updated to use the previously
introduced `CompressData` helper.)

In addition, the patch brings the implementation of `Snappy_Uncompress` into sync with
the other uncompression methods by making the method compute the buffer size and allocate
the buffer itself. Finally, the patch eliminates some potentially risky back-and-forth conversions
between various unsigned and signed integer types by exposing the size of the allocated buffer
as a `size_t` instead of an `int`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7434

Test Plan:
`make check`
`./db_bench -benchmarks=compress,uncompress --compression_type ...`

Reviewed By: riversand963

Differential Revision: D23900011

Pulled By: ltamasi

fbshipit-source-id: b25df63ceec4639889be94acb22eb53e530c54e0
2020-09-25 09:01:45 -07:00
Andrew Kryczka
0698598f3a Fix scope of ReadOptions in SstFileReader (#7432)
Summary:
a4a4a2dabd changed the contract of `TableReader::NewIterator()` to require
`ReadOptions` outlive the returned iterator. But I didn't notice that
`SstFileReader` violates the new contract and needs to be adapted. The unit test
provided here exposes the problem when run under ASAN.

```
$ ./sst_file_reader_test --gtest_filter=SstFileReaderTest.ReadOptionsOutOfScope
Note: Google Test filter = SstFileReaderTest.ReadOptionsOutOfScope
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from SstFileReaderTest
[ RUN      ] SstFileReaderTest.ReadOptionsOutOfScope
=================================================================
==3238048==ERROR: AddressSanitizer: stack-use-after-scope on address 0x7ffd6189e158 at pc 0x000001298350 bp 0x7ffd6189c280 sp 0x7ffd6189c278
READ of size 8 at 0x7ffd6189e158 thread T0
    #0 0x129834f in rocksdb::BlockBasedTableIterator::InitDataBlock() table/block_based/block_based_table_iterator.cc:236
    https://github.com/facebook/rocksdb/issues/1 0x12b01f7 in rocksdb::BlockBasedTableIterator::SeekImpl(rocksdb::Slice const*) table/block_based/block_based_table_iterator.cc:77
    https://github.com/facebook/rocksdb/issues/2 0x844d28 in rocksdb::IteratorWrapperBase<rocksdb::Slice>::SeekToFirst() table/iterator_wrapper.h:116
    https://github.com/facebook/rocksdb/issues/3 0x844d28 in rocksdb::DBIter::SeekToFirst() db/db_iter.cc:1352
    https://github.com/facebook/rocksdb/issues/4 0x52482b in rocksdb::SstFileReaderTest_ReadOptionsOutOfScope_Test::TestBody() table/sst_file_reader_test.cc:150
    https://github.com/facebook/rocksdb/issues/5 0x5f433c in void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3899
    https://github.com/facebook/rocksdb/issues/6 0x5f433c in void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3935
    https://github.com/facebook/rocksdb/issues/7 0x5cc2de in testing::Test::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3973
    https://github.com/facebook/rocksdb/issues/8 0x5cc988 in testing::Test::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3965
    https://github.com/facebook/rocksdb/issues/9 0x5cc988 in testing::TestInfo::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4149
    https://github.com/facebook/rocksdb/issues/10 0x5cce9a in testing::TestInfo::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4124
    https://github.com/facebook/rocksdb/issues/11 0x5cce9a in testing::TestCase::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4267
    https://github.com/facebook/rocksdb/issues/12 0x5ce696 in testing::TestCase::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:4253
    https://github.com/facebook/rocksdb/issues/13 0x5ce696 in testing::internal::UnitTestImpl::RunAllTests() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:6633
    https://github.com/facebook/rocksdb/issues/14 0x5f541c in bool testing::internal::HandleSehExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3899
    https://github.com/facebook/rocksdb/issues/15 0x5f541c in bool testing::internal::HandleExceptionsInMethodIfSupported<testing::internal::UnitTestImpl, bool>(testing::internal::UnitTestImpl*, bool (testing::internal::UnitTestImpl::*)(), char const*) third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:3935
    https://github.com/facebook/rocksdb/issues/16 0x5cee74 in testing::UnitTest::Run() third-party/gtest-1.8.1/fused-src/gtest/gtest-all.cc:6242
    https://github.com/facebook/rocksdb/issues/17 0x4c0332 in RUN_ALL_TESTS() third-party/gtest-1.8.1/fused-src/gtest/gtest.h:22104
    https://github.com/facebook/rocksdb/issues/18 0x4c0332 in main table/sst_file_reader_test.cc:213
    https://github.com/facebook/rocksdb/issues/19 0x7fb0263281a5 in __libc_start_main (/usr/local/fbcode/platform007/lib/libc.so.6+0x211a5)
    https://github.com/facebook/rocksdb/issues/20 0x523e56  (/data/users/andrewkr/rocksdb/sst_file_reader_test+0x523e56)

Address 0x7ffd6189e158 is located in stack of thread T0 at offset 568 in frame
    #0 0x52428f in rocksdb::SstFileReaderTest_ReadOptionsOutOfScope_Test::TestBody() table/sst_file_reader_test.cc:131

  This frame has 9 object(s):
    [32, 40) 'reader'
    [96, 104) '<unknown>'
    [160, 168) '<unknown>'
    [224, 232) 'iter'
    [288, 304) 'gtest_ar'
    [352, 368) '<unknown>'
    [416, 440) 'keys'
    [480, 512) '<unknown>'
    [544, 680) 'ropts' <== Memory access at offset 568 is inside this variable
HINT: this may be a false positive if your program uses some custom stack unwind mechanism or swapcontext
      (longjmp and C++ exceptions *are* supported)
 AddressSanitizer: stack-use-after-scope table/block_based/block_based_table_iterator.cc:236 in rocksdb::BlockBasedTableIterator::InitDataBlock()
...
```

The fix is to use `ArenaWrappedDBIter` which has support for holding a
`ReadOptions` in an `Arena` whose lifetime is tied to the iterator.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7432

Test Plan: verified the provided unit test no longer fails

Reviewed By: pdillinger

Differential Revision: D23880043

Pulled By: ajkr

fbshipit-source-id: 9464c37408f7bd7c9c4a90ceffb04d9f0ca7a494
2020-09-23 15:24:03 -07:00
yaphet
323a834d1d Fix typo (#7353)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7353

Reviewed By: ajkr

Differential Revision: D23585525

Pulled By: zhichao-cao

fbshipit-source-id: 3f72d9663ec207b9dfe6b287d455a13d3c86879f
2020-09-19 18:11:16 -07:00
Peter Dillinger
93719fc953 Restore file size in backup table file names (and other cleanup) (#7400)
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.

This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.

We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).

We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.

Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`

Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.

Actual file name patterns and priorities, as regexes:

    kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
      [0-9]+_[0-9]+_[0-9]+[.]sst
    kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
      [0-9]+_[0-9a-fA-F-]+[.]sst
    kUseDbSessionId AND NOT kFlagIncludeFileSize ->
      [0-9]+_s[0-9A-Z]{20}[.]sst
    kUseDbSessionId AND kFlagIncludeFileSize (default) ->
      [0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst

We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.

This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400

Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.

Reviewed By: ajkr

Differential Revision: D23759587

Pulled By: pdillinger

fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
2020-09-17 10:24:22 -07:00
mrambacher
a08d6f18f0 Add more tests to ASSERT_STATUS_CHECKED (#7367)
Summary:
db_options_test
options_file_test
auto_roll_logger_test
options_util_test
persistent_cache_test

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7367

Reviewed By: jay-zhuang

Differential Revision: D23712520

Pulled By: zhichao-cao

fbshipit-source-id: 99b331e357f5d6a6aabee89d1bd933002cbb3908
2020-09-16 15:48:07 -07:00
mrambacher
7d472accdc Bring the Configurable options together (#5753)
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts

Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753

Reviewed By: ajkr

Differential Revision: D23385030

Pulled By: zhichao-cao

fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
2020-09-14 17:01:01 -07:00
Jay Zhuang
8a8a01c642 Fix compile error for old gcc-4.8 (#7358)
Summary:
gcc-4.8 returns error when using the constructor. Not sure if it's a compiler bug/limitation or code issue:
```
table/block_based/block_based_table_reader.cc:3183:67: error: use of deleted function ‘rocksdb::WritableFileStringStreamAdapter::WritableFileStringStreamAdapter(rocksdb::WritableFileStringStreamAdapter&&)’
```

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7358

Reviewed By: pdillinger

Differential Revision: D23577651

Pulled By: jay-zhuang

fbshipit-source-id: b0197e3d3538da61a6f3866410d88d2047fb9695
2020-09-08 12:09:34 -07:00
Akanksha Mahajan
b175eceb09 Store FSWritableFilePtr object in WritableFileWriter (#7193)
Summary:
Replace FSWritableFile pointer with FSWritableFilePtr
    object in WritableFileWriter.
    This new object wraps FSWritableFile pointer.

    Objective: If tracing is enabled, FSWritableFile Ptr returns
    FSWritableFileTracingWrapper pointer that includes all necessary
    information in IORecord and calls underlying FileSystem and invokes
    IOTracer to dump that record in a binary file. If tracing is disabled
    then, underlying FileSystem pointer is returned directly.
    FSWritableFilePtr wrapper class is added to bypass the
    FSWritableFileWrapper when
    tracing is disabled.

    Test Plan: make check -j64

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7193

Reviewed By: anand1976

Differential Revision: D23355915

Pulled By: akankshamahajan15

fbshipit-source-id: e62a27a13c1fd77e36a6dbafc7006d969bed25cf
2020-09-08 10:56:08 -07:00
Jay Zhuang
27aa443a15 Add sst_file_dumper status check (#7315)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7315

Test Plan:
`ASSERT_STATUS_CHECKED=1 make sst_dump_test && ./sst_dump_test`
And manually run `./sst_dump --file=*.sst` before and after the change.

Reviewed By: pdillinger

Differential Revision: D23361669

Pulled By: jay-zhuang

fbshipit-source-id: 5bf51a2a90ee35c8c679e5f604732ec2aef5949a
2020-09-04 19:26:42 -07:00
Andrew Kryczka
af54c4092a fix SstFileWriter with dictionary compression (#7323)
Summary:
In block-based table builder, the cut-over from buffered to unbuffered
mode involves sampling the buffered blocks and generating a dictionary.
There was a bug where `SstFileWriter` passed zero as the `target_file_size`
causing the cutover to happen immediately, so there were no samples
available for generating the dictionary.

This PR changes the meaning of `target_file_size == 0` to mean buffer
the whole file before cutting over. It also adds dictionary compression
support to `sst_dump --command=recompress` for easy evaluation.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7323

Reviewed By: cheng-chang

Differential Revision: D23412158

Pulled By: ajkr

fbshipit-source-id: 3b232050e70ef3c2ee85a4b5f6fadb139c569873
2020-09-03 15:49:57 -07:00
Bingyi Sun
61d5a132c9 Fix typo: rename "bounary" to "boundary" in block.cc (#7328)
Summary:
Fix typo in comment for SeekForGetImpl().
Rename "bounary" to "boundary"

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7328

Reviewed By: riversand963

Differential Revision: D23439748

Pulled By: zhichao-cao

fbshipit-source-id: 83a34c417c71a3210ce54a090d76c4d5571313f3
2020-09-02 20:47:18 -07:00
Jay Zhuang
c2485f2d81 Add buffer prefetch support for non directIO usecase (#7312)
Summary:
A new file interface `SupportPrefetch()` is added. When the user overrides it to `false`, an internal prefetch buffer will be used for readahead. Useful for non-directIO but FS doesn't have readahead support.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7312

Reviewed By: anand1976

Differential Revision: D23329847

Pulled By: jay-zhuang

fbshipit-source-id: 71cd4ce6f4a820840294e4e6aec111ab76175527
2020-08-27 18:16:53 -07:00
sdong
722814e357 Get() to fail with underlying failures in PartitionIndexReader::CacheDependencies() (#7297)
Summary:
Right now all I/O failures under PartitionIndexReader::CacheDependencies() is swallowed. This doesn't impact correctness but we've made a decision that any I/O error in read path now should be returned to users for awareness. Return errors in those cases instead.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7297

Test Plan: Add a new unit test that ingest errors in this code path and see Get() fails. Only one I/O path is hit in PartitionIndexReader::CacheDependencies(). Several option changes are attempt but not able to got other pread paths triggered. Not sure whether other failure cases would be even possible. Would rely on continuous stress test to validate it.

Reviewed By: anand1976

Differential Revision: D23257950

fbshipit-source-id: 859dbc92fa239996e1bb378329344d3d54168c03
2020-08-25 19:01:05 -07:00
mrambacher
b7e1c5213f Add some simulator cache and block tracer tests to ASSERT_STATUS_CHECKED (#7305)
Summary:
More tests now pass.  When in doubt, I added a TODO comment to check what should happen with an ignored error.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7305

Reviewed By: akankshamahajan15

Differential Revision: D23301262

Pulled By: ajkr

fbshipit-source-id: 5f120edc7393560aefc0633250277bbc7e8de9e6
2020-08-24 16:43:31 -07:00
mrambacher
e9befdebbf Add EnvTestWithParam::OptionsTest to the ASSERT_STATUS_CHECKED passes (#7283)
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests.  The DB functionality required for this test now passes the check.

When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283

Reviewed By: akankshamahajan15

Differential Revision: D23251497

Pulled By: ajkr

fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
2020-08-20 19:18:35 -07:00
Levi Tamasi
9d6f48ec1d Clean up CompressBlock/CompressBlockInternal a bit (#7249)
Summary:
The patch cleans up and refactors `CompressBlock` and `CompressBlockInternal` a bit.
In particular, it does the following:
* It renames `CompressBlockInternal` to `CompressData` and moves it to `util/compression.h`,
where other general compression-related utilities are located. This will facilitate reuse in the
BlobDB write path.
* The signature of the method is changed so it now takes `compression_format_version`
(similarly to the compression library specific methods) instead of `format_version` (which is
specific to the block based table).
* `GetCompressionFormatForVersion` no longer takes `compression_type` as a parameter.
This parameter was only used in a (not entirely up-to-date) assertion; also, removing it
eliminates the need to ensure this precondition holds at all call sites.
* Does some minor cleanup in `CompressBlock`, for instance, it is now possible to pass
only one of `sampled_output_fast` and `sampled_output_slow`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7249

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D23087278

Pulled By: ltamasi

fbshipit-source-id: e6316e45baed8b4e7de7c1780c90501c2a3439b3
2020-08-12 18:25:48 -07:00
Yuhong Guo
5444942f15 Fix cmake build on MacOS (#7205)
Summary:
1. `std::random_shuffle` is deprecated and now we can use `std::shuffle`
```
/rocksdb/db/prefix_test.cc:590:12: error: 'random_shuffle<std::__1::__wrap_iter<unsigned long long *> >'
      is deprecated [-Werror,-Wdeprecated-declarations]
      std::random_shuffle(prefixes.begin(), prefixes.end());
           ^
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../include/c++/v1/algorithm:2982:1: note:
      'random_shuffle<std::__1::__wrap_iter<unsigned long long *> >' has been explicitly marked deprecated here
_LIBCPP_DEPRECATED_IN_CXX14 void
^
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../include/c++/v1/__config:1107:39: note: expanded from macro
      '_LIBCPP_DEPRECATED_IN_CXX14'
#  define _LIBCPP_DEPRECATED_IN_CXX14 _LIBCPP_DEPRECATED
                                      ^
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../include/c++/v1/__config:1090:48: note: expanded from macro
      '_LIBCPP_DEPRECATED'
#    define _LIBCPP_DEPRECATED __attribute__ ((deprecated))
```
2. `c_test` link error with `-DROCKSDB_BUILD_SHARED=OFF`:
```
[  7%] Linking CXX executable c_test
ld: library not found for -lrocksdb-shared
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[5]: *** [c_test] Error 1
make[4]: *** [CMakeFiles/c_test.dir/all] Error 2
make[4]: *** Waiting for unfinished jobs....
```

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7205

Reviewed By: ajkr

Differential Revision: D23030641

Pulled By: pdillinger

fbshipit-source-id: f270e50fc0b824ca1a0876ec5c65d33f55a72dd0
2020-08-10 10:48:05 -07:00
anand76
832b056a30 Enable IO timeouts for iterators (#7161)
Summary:
Introduce io_timeout in ReadOptions and enabled deadline/io_timeout for
Iterators.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7161

Test Plan: New unit tests in db_basic_test

Reviewed By: riversand963

Differential Revision: D22687352

Pulled By: anand1976

fbshipit-source-id: 67bbb0e6d7ae80b256589244468494292538c6ec
2020-08-07 12:01:08 -07:00
sdong
5c1a544122 Clean up InternalIterator upper bound logic a little bit (#7200)
Summary:
IteratorIterator::IsOutOfBound() and IteratorIterator::MayBeOutOfUpperBound() are two functions that related to upper bound check. It is hard for users to reason about this complexity. Consolidate the two functions into one and assign an enum as results to improve readability.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7200

Test Plan: Run all existing test. Would run crash test with atomic for a while.

Reviewed By: anand1976

Differential Revision: D22833181

fbshipit-source-id: a0c724267056adbd0476bde74650e6c7226077e6
2020-08-05 10:44:57 -07:00
sdong
41c328fe57 Fix a perf regression that caused every key to go through upper bound check (#7209)
Summary:
https://github.com/facebook/rocksdb/pull/5289 introduces a performance regression that caused an upper bound check within every BlockBasedTableIterator::Next(). This is unnecessary if we've checked the boundary key for current block and it is within upper bound.

Fix the bug. Also rename the boolean to a enum so that the code is slightly better readable. The original regression was probably to fix a bug that the block upper bound check status is not reset after a new block is created. Fix it bug so that the regression can be avoided without hitting the bug.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7209

Test Plan: Run all existing tests. Will run atomic black box crash test for a while.

Reviewed By: anand1976

Differential Revision: D22859246

fbshipit-source-id: cbdad1f5e656c55fd8b71726d5a4f6cb53ff9140
2020-08-04 11:30:09 -07:00
Andrew Kryczka
a4a4a2dabd dedup ReadOptions in iterator hierarchy (#7210)
Summary:
Previously, a `ReadOptions` object was stored in every `BlockBasedTableIterator`
and every `LevelIterator`. This redundancy consumes extra memory,
resulting in the `Arena` making more allocations, and iteration
observing worse cache performance.

This PR migrates callers of `NewInternalIterator()` and
`MakeInputIterator()` to provide a `ReadOptions` object guaranteed to
outlive the returned iterator. When the iterator's lifetime will be managed by the
user, this lifetime guarantee is achieved by storing the `ReadOptions`
value in `ArenaWrappedDBIter`. Then, sub-iterators of `NewInternalIterator()` and
`MakeInputIterator()` can hold a reference-to-const `ReadOptions`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7210

Test Plan:
- `make check` under ASAN and valgrind
- benchmark: on a DB with 2 L0 files and 3 L1+ levels, this PR reduced `Arena` allocation 4792 -> 4160 bytes.

Reviewed By: anand1976

Differential Revision: D22861323

Pulled By: ajkr

fbshipit-source-id: 54aebb3e89c872eeab0f5793b4b6e42878d093ce
2020-08-03 15:23:04 -07:00
sdong
692f6a3138 Implement NextAndGetResult() in memtable and level iterator (#7179)
Summary:
NextAndGetResult() is not implemented in memtable and is very simply implemented in level iterator. The result is that for a normal leveled iterator, performance regression will be observed for calling PrepareValue() for most iterator Next(). Mitigate the problem by implementing the function for both iterators. In level iterator, the implementation cannot be perfect as when calling file iterator's SeekToFirst() we don't have information about whether the value is prepared. Fortunately, the first key should not cause a big portion of the CPu.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7179

Test Plan: Run normal crash test for a while.

Reviewed By: anand1976

Differential Revision: D22783840

fbshipit-source-id: c19f45cdf21b756190adef97a3b66ccde3936e05
2020-07-29 09:45:21 -07:00
mrambacher
d44cbc5314 Add hash of key/value checks when paranoid_file_checks=true (#7134)
Summary:
When paraoid_files_checks=true, a rolling key-value hash is generated and compared to what is written to the file.  If the values do not match, the SST file is rejected.

Code put in place for the check for both flush and compaction jobs.  Corresponding test added to corruption_test.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7134

Reviewed By: cheng-chang

Differential Revision: D22646149

fbshipit-source-id: 8fde1984a1a11edd3bd82a413acffc5ea7aa683f
2020-07-22 11:04:40 -07:00
Andrew Kryczka
643c863b72 minimize BlockIter comparator scope (#7149)
Summary:
PR https://github.com/facebook/rocksdb/issues/6944 transitioned `BlockIter` from using `Comparator*` to using
concrete `UserComparatorWrapper` and `InternalKeyComparator`. However,
adding them as instance variables to `BlockIter` was not optimal.
Bloating `BlockIter` caused the `ArenaWrappedDBIter`'s arena allocator to do more heap
allocations (in certain cases) which harmed performance of `DB::NewIterator()`. This PR
pushes down the concrete comparator objects to the point of usage, which
forces them to be on the stack. As a result, the `BlockIter` is back to
its original size prior to https://github.com/facebook/rocksdb/issues/6944 (actually a bit smaller since there
were two `Comparator*` before).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7149

Test Plan:
verified our internal `DB::NewIterator()`-heavy regression
test no longer reports regression.

Reviewed By: riversand963

Differential Revision: D22623189

Pulled By: ajkr

fbshipit-source-id: f6d69accfe5de51e0bd9874a480b32b29909bab6
2020-07-20 14:07:04 -07:00
mrambacher
c7c7b07f06 More Makefile Cleanup (#7097)
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env

These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies.  By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.

Tested both release and debug builds via Make and CMake for both static and shared libraries.

More work remains to clean up how the tools are built and remove some unnecessary dependencies.  There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097

Reviewed By: riversand963

Differential Revision: D22463160

Pulled By: pdillinger

fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
2020-07-09 14:35:17 -07:00
Andrew Kryczka
82611ee25a save key comparisons in BlockIter::BinarySeek (#7068)
Summary:
This is a followup to https://github.com/facebook/rocksdb/issues/6646. In that PR, for simplicity I just appended a comparison against the 0th restart key in case `BinarySeek()`'s binary search landed at index 0. As a result there were `2/(N+1) + log_2(N)` key comparisons. This PR does it differently. Now we expand the binary search range by one so it also covers the case where target is at or before the restart key at index 0. As a result, it involves `log_2(N+1)` key comparisons.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7068

Test Plan:
ran readrandom with mostly default settings and counted key comparisons
using `PerfContext`.

before: `user_key_comparison_count = 28881965`
after: `user_key_comparison_count = 27823245`

setup command:

```
$ TEST_TMPDIR=/dev/shm/dbbench ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -max_background_jobs=12 -level_compaction_dynamic_level_bytes=true -num=10000000
```

benchmark command:

```
$ TEST_TMPDIR=/dev/shm/dbbench/ ./db_bench -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=10000000 -compression_type=none -reads=1000000 -perf_level=3
```

Reviewed By: anand1976

Differential Revision: D22357032

Pulled By: ajkr

fbshipit-source-id: 8b01e9c1c2a4e9d02fc9dfe16c1cc0327f8bdf24
2020-07-09 12:27:20 -07:00
Zitan Chen
b35a2f9146 Fix GetFileDbIdentities (#7104)
Summary:
Although PR https://github.com/facebook/rocksdb/issues/7032 fixes the construction of the `SstFileDumper` in `GetFileDbIdentities` by setting a proper `Env` of the `Options` passed in the constructor, the file path was not corrected accordingly. This actually disables backup engine to use db session ids in the file names since the `db_session_id` is always empty.

Now it is fixed by setting the correct path in the construction of `SstFileDumper`. Furthermore, to preserve the Direct IO property that backup engine already has, parameter `EnvOptions` is added to `GetFileDbIdentities` and `SstFileDumper`.

The `BackupUsingDirectIO` test is updated accordingly.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7104

Test Plan: backupable_db_test and some manual tests.

Reviewed By: ajkr

Differential Revision: D22443245

Pulled By: gg814

fbshipit-source-id: 056a9bb8b82947c5e73d7c3fbb62bfe23af5e562
2020-07-09 08:37:59 -07:00
Akanksha Mahajan
54f171fe90 Update Flush policy in PartitionedIndexBuilder on switching from user-key to internal-key mode (#7096)
Summary:
When format_version is high enough to support user-key and
there are index entries for same user key that spans multiple data
blocks then it changes from user-key mode to internal-key mode. But the
flush policy is not reset to point to Block Builder of internal-keys.
After this switch, no entries are added to user key index partition
result, thus it never triggers flushing the block.

Fix: 1. After adding the entry in sub_builder_index_, if there is a switch
from user-key to internal-key, then flush policy is updated to point to
Block Builder of internal-keys index partition.
2. Set sub_builder_index_->seperator_is_key_plus_seq_ = true if
seperator_is_key_plus_seq_  is set to true so that subsequent partitions
can also use internal key mode.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7096

Test Plan: make check -j64

Reviewed By: ajkr

Differential Revision: D22416598

Pulled By: akankshamahajan15

fbshipit-source-id: 01fc2dc07ea1b32f8fb803995ebe6e9a3fbe67ac
2020-07-08 21:03:04 -07:00
rockeet
b649d8cb97 Fixed Factory construct just for calling .Name() (#7080)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/7080

Reviewed By: riversand963

Differential Revision: D22412352

Pulled By: ajkr

fbshipit-source-id: 1d7f4c1621040a0130245139b52c3f4d3deac865
2020-07-08 11:54:00 -07:00
Andrew Kryczka
dd29ad4223 Separate internal and user key comparators in BlockIter (#6944)
Summary:
Replace `BlockIter::comparator_` and `IndexBlockIter::user_comparator_wrapper_` with a concrete `UserComparatorWrapper` and `InternalKeyComparator`. The motivation for this change was the inconvenience of not knowing the concrete type of `BlockIter::comparator_`, which prevented calling specialized internal key comparison functions to optimize comparison of keys with global seqno applied.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/6944

Test Plan:
benchmark setup -- single file DBs, in-memory, no compression. "normal_db"
created by regular flush; "ingestion_db" created by ingesting a file. Both
DBs have same contents.

```
$ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000
$ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}')
$ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/
```

benchmark run command:

```
$ TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=$SEEK_NEXT -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=0 -threads=1 -reads=200000000 -mmap_read=1 -verify_checksum=false
```

results: perf improved marginally for ingestion_db and did not change significantly for normal_db:

SEEK_NEXT | DB | code | ops/sec | % change
-- | -- | -- | -- | --
0 | normal_db | master | 350880 |  
0 | normal_db | PR6944 | 351040 | 0.0
0 | ingestion_db | master | 343255 |  
0 | ingestion_db | PR6944 | 349424 | 1.8
10 | normal_db | master | 218711 |  
10 | normal_db | PR6944 | 217892 | -0.4
10 | ingestion_db | master | 220334 |  
10 | ingestion_db | PR6944 | 226437 | 2.8

Reviewed By: pdillinger

Differential Revision: D21924676

Pulled By: ajkr

fbshipit-source-id: ea4288a2eefa8112eb6c651a671c1de18c12e538
2020-07-07 17:26:16 -07:00
Peter Dillinger
a680a7ea37 Un-revert #7049, revert #7022 (#7071)
Summary:
Even though local bisection gave me a clear signal (and still does) that reverting https://github.com/facebook/rocksdb/issues/7049 would fix the failures in MultiThreadedDBTest, https://github.com/facebook/rocksdb/issues/7022 seems to be the root cause. Reverting https://github.com/facebook/rocksdb/issues/7022 and keeping https://github.com/facebook/rocksdb/issues/7049 seems to fix the issue in local reproducer also. (Had these landed in opposite order, bisection would have found the root cause.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7071

Reviewed By: akankshamahajan15

Differential Revision: D22362857

Pulled By: pdillinger

fbshipit-source-id: ed63df3d74e9d4ce1604de8fe43b216166c7a3f0
2020-07-02 13:30:41 -07:00
Akanksha Mahajan
5edfe3a3d8 Update Flush policy in PartitionedIndexBuilder on switching from user-key to internal-key mode (#7022)
Summary:
When format_version is high enough to support user-key and there are index entries for same user key that spans multiple data blocks then it changes from user-key mode to internal-key mode. But the flush policy is not reset to point to Block Builder of internal-keys. After this switch, no entries are added to user key index partition result, thus it never triggers flushing the block.

Fix: After adding the entry in sub_builder_index_, if there is a switch from user-key to internal-key, then flush policy is updated to point to Block Builder of internal-keys index partition.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7022

Test Plan:
1. make check -j64
           2. Added one unit test case

Reviewed By: ajkr

Differential Revision: D22197734

Pulled By: akankshamahajan15

fbshipit-source-id: d87e9e46bccab8e896ee6979d6b79c51f73d479e
2020-07-01 14:58:08 -07:00
Andrew Kryczka
8458532d58 Skip unnecessary allocation for mmap reads under 5000 bytes (#7043)
Summary:
With mmap enabled on an uncompressed file, we were previously always doing a heap allocation to obtain the scratch buffer for `RandomAccessFileReader::Read()`. However, that allocation was unnecessary as the underlying file reader returned a pointer into its mapped memory, not the provided scratch buffer. This PR makes passes the `BlockFetcher`'s inline buffer as the scratch buffer if the data block is small enough (less than `kDefaultStackBufferSize` bytes, currently 5000). Ideally we would not pass a scratch buffer at all for an mmap read; however, the `RandomAccessFile::Read()` API guarantees such a buffer is provided, and non-standard implementations may be relying on it even when `Options::allow_mmap_reads == true`. In that case, this PR still works but introduces an extra copy from the inline buffer to a heap buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7043

Reviewed By: cheng-chang

Differential Revision: D22320606

Pulled By: ajkr

fbshipit-source-id: ad964dd23df34e07d979c6032c2dfe5454c98b52
2020-06-30 15:40:40 -07:00
Anand Ananthabhotla
9a5886bd8c Extend Get/MultiGet deadline support to table open (#6982)
Summary:
Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open.

The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future.

Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982

Test Plan: Add new unit tests in db_basic_test

Reviewed By: riversand963

Differential Revision: D22219515

Pulled By: anand1976

fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b
2020-06-29 14:53:17 -07:00
sdong
f9817201af Add unity build to CircleCI (#7026)
Summary:
We are still keeping unity build working. So it's a good idea to add to a pre-commit CI.
A latest GCC docker image just to get a little bit more coverage. Fix three small issues to make it pass.
Also make unity_test to run db_basic_test rather than db_test to cut the test time. There is no point to run expensive tests here. It was set to run db_test before db_basic_test was separated out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7026

Test Plan: watch tests to pass.

Reviewed By: zhichao-cao

Differential Revision: D22223197

fbshipit-source-id: baa3b6cbb623bf359829b63ce35715c75bcb0ed4
2020-06-26 11:14:08 -07:00
Zitan Chen
be41c61f22 Add a new option for BackupEngine to store table files under shared_checksum using DB session id in the backup filenames (#6997)
Summary:
`BackupableDBOptions::new_naming_for_backup_files` is added. This option is false by default. When it is true, backup table filenames under directory shared_checksum are of the form `<file_number>_<crc32c>_<db_session_id>.sst`.

Note that when this option is true, it comes into effect only when both `share_files_with_checksum` and `share_table_files` are true.

Three new test cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6997

Test Plan: Passed make check.

Reviewed By: ajkr

Differential Revision: D22098895

Pulled By: gg814

fbshipit-source-id: a1d9145e7fe562d71cde7ac995e17cb24fd42e76
2020-06-24 19:31:25 -07:00
sdong
9cc25190e1 Test CircleCI with CLANG-10 (#7025)
Summary:
It's useful to build RocksDB using a more recent clang version in CI. Add a CircleCI build and fix some issues with it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7025

Test Plan: See all tests pass.

Reviewed By: pdillinger

Differential Revision: D22215700

fbshipit-source-id: 914a729c2cd3f3ac4a627cc0ac58d4691dca2168
2020-06-24 16:22:49 -07:00
Peter Dillinger
5b2bbacb6f Minimize memory internal fragmentation for Bloom filters (#6427)
Summary:
New experimental option BBTO::optimize_filters_for_memory builds
filters that maximize their use of "usable size" from malloc_usable_size,
which is also used to compute block cache charges.

Rather than always "rounding up," we track state in the
BloomFilterPolicy object to mix essentially "rounding down" and
"rounding up" so that the average FP rate of all generated filters is
the same as without the option. (YMMV as heavily accessed filters might
be unluckily lower accuracy.)

Thus, the option near-minimizes what the block cache considers as
"memory used" for a given target Bloom filter false positive rate and
Bloom filter implementation. There are no forward or backward
compatibility issues with this change, though it only works on the
format_version=5 Bloom filter.

With Jemalloc, we see about 10% reduction in memory footprint (and block
cache charge) for Bloom filters, but 1-2% increase in storage footprint,
due to encoding efficiency losses (FP rate is non-linear with bits/key).

Why not weighted random round up/down rather than state tracking? By
only requiring malloc_usable_size, we don't actually know what the next
larger and next smaller usable sizes for the allocator are. We pick a
requested size, accept and use whatever usable size it has, and use the
difference to inform our next choice. This allows us to narrow in on the
right balance without tracking/predicting usable sizes.

Why not weight history of generated filter false positive rates by
number of keys? This could lead to excess skew in small filters after
generating a large filter.

Results from filter_bench with jemalloc (irrelevant details omitted):

    (normal keys/filter, but high variance)
    $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9
    Build avg ns/key: 29.6278
    Number of filters: 5516
    Total size (MB): 200.046
    Reported total allocated memory (MB): 220.597
    Reported internal fragmentation: 10.2732%
    Bits/key stored: 10.0097
    Average FP rate %: 0.965228
    $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
    Build avg ns/key: 30.5104
    Number of filters: 5464
    Total size (MB): 200.015
    Reported total allocated memory (MB): 200.322
    Reported internal fragmentation: 0.153709%
    Bits/key stored: 10.1011
    Average FP rate %: 0.966313

    (very few keys / filter, optimization not as effective due to ~59 byte
     internal fragmentation in blocked Bloom filter representation)
    $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9
    Build avg ns/key: 29.5649
    Number of filters: 162950
    Total size (MB): 200.001
    Reported total allocated memory (MB): 224.624
    Reported internal fragmentation: 12.3117%
    Bits/key stored: 10.2951
    Average FP rate %: 0.821534
    $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
    Build avg ns/key: 31.8057
    Number of filters: 159849
    Total size (MB): 200
    Reported total allocated memory (MB): 208.846
    Reported internal fragmentation: 4.42297%
    Bits/key stored: 10.4948
    Average FP rate %: 0.811006

    (high keys/filter)
    $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9
    Build avg ns/key: 29.7017
    Number of filters: 164
    Total size (MB): 200.352
    Reported total allocated memory (MB): 221.5
    Reported internal fragmentation: 10.5552%
    Bits/key stored: 10.0003
    Average FP rate %: 0.969358
    $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
    Build avg ns/key: 30.7131
    Number of filters: 160
    Total size (MB): 200.928
    Reported total allocated memory (MB): 200.938
    Reported internal fragmentation: 0.00448054%
    Bits/key stored: 10.1852
    Average FP rate %: 0.963387

And from db_bench (block cache) with jemalloc:

    $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
    $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
    $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
    17063835
    $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
    17430747
    $ #^ 2.1% additional filter storage
    $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
    rocksdb.block.cache.index.add COUNT : 33
    rocksdb.block.cache.index.bytes.insert COUNT : 8440400
    rocksdb.block.cache.filter.add COUNT : 33
    rocksdb.block.cache.filter.bytes.insert COUNT : 21087528
    rocksdb.bloom.filter.useful COUNT : 4963889
    rocksdb.bloom.filter.full.positive COUNT : 1214081
    rocksdb.bloom.filter.full.true.positive COUNT : 1161999
    $ #^ 1.04 % observed FP rate
    $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
    rocksdb.block.cache.index.add COUNT : 33
    rocksdb.block.cache.index.bytes.insert COUNT : 8448592
    rocksdb.block.cache.filter.add COUNT : 33
    rocksdb.block.cache.filter.bytes.insert COUNT : 18220328
    rocksdb.bloom.filter.useful COUNT : 5360933
    rocksdb.bloom.filter.full.positive COUNT : 1321315
    rocksdb.bloom.filter.full.true.positive COUNT : 1262999
    $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters

(Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427

Test Plan: unit test added, 'make check' with gcc, clang and valgrind

Reviewed By: siying

Differential Revision: D22124374

Pulled By: pdillinger

fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 13:32:07 -07:00
Peter Dillinger
25a0d0ca30 Fix block checksum for >=4GB, refactor (#6978)
Summary:
Although RocksDB falls over in various other ways with KVs
around 4GB or more, this change fixes how XXH32 and XXH64 were being
called by the block checksum code to support >= 4GB in case that should
ever happen, or the code copied for other uses.

This change is not a schema compatibility issue because the checksum
verification code would checksum the first (block_size + 1) mod 2^32
bytes while the checksum construction code would checksum the first
block_size mod 2^32 plus the compression type byte, meaning the
XXH32/64 checksums for >=4GB block would not match about 255/256 times.

While touching this code, I refactored to consolidate redundant
implementations, improving diagnostics and performance tracking in some
cases. Also used less confusing language in those diagnostics.

Makes https://github.com/facebook/rocksdb/issues/6875 obsolete.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6978

Test Plan:
I was able to write a test for this using an SST file writer
and VerifyChecksum in a reader. The test fails before the fix, though
I'm leaving the test disabled because I don't think it's worth the
expense of running regularly.

Reviewed By: gg814

Differential Revision: D22143260

Pulled By: pdillinger

fbshipit-source-id: 982993d16134e8c50bea2269047f901c1783726e
2020-06-19 16:18:24 -07:00
sdong
223b57eeb8 Fix the bug that compressed cache is disabled in read-only DBs (#6990)
Summary:
Compressed block cache is disabled in https://github.com/facebook/rocksdb/pull/4650 for no good reason. Re-enable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6990

Test Plan: Add a unit test to make sure a general function works with read-only DB + compressed block cache.

Reviewed By: ltamasi

Differential Revision: D22072755

fbshipit-source-id: 2a55df6363de23a78979cf6c747526359e5dc7a1
2020-06-17 14:30:54 -07:00
Zitan Chen
94d04529de Store DB identity and DB session ID in SST files (#6983)
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.

The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.

In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.

A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983

Test Plan: make check and some manual tests.

Reviewed By: zhichao-cao

Differential Revision: D22048826

Pulled By: gg814

fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
2020-06-17 10:57:40 -07:00
Levi Tamasi
aa8f1331af Fix uninitialized memory read in table_test (#6980)
Summary:
When using parameterized tests, `gtest` sometimes prints the test
parameters. If no other printing method is available, it essentially
produces a hex dump of the object. This can cause issues with valgrind
with types like `TestArgs` in `table_test`, where the object layout has
gaps (with uninitialized contents) due to the members' alignment
requirements. The patch fixes the uninitialized reads by providing an
`operator<<` for `TestArgs` and also makes sure all members are
initialized (in a consistent order) on all code paths.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6980

Test Plan: `valgrind --leak-check=full ./table_test`

Reviewed By: siying

Differential Revision: D22045536

Pulled By: ltamasi

fbshipit-source-id: 6f5920ac28c712d0aa88162fffb80172ed769c32
2020-06-15 14:08:12 -07:00
Zhen Li
9c24a5cb4d Fix persistent cache on windows (#6932)
Summary:
Persistent cache feature caused rocks db crash on windows. I posted a issue for it, https://github.com/facebook/rocksdb/issues/6919. I found this is because no "persistent_cache_key_prefix" is generated for persistent cache. Looking repo history, "GetUniqueIdFromFile" is not implemented on Windows. So my fix is adding "NewId()" function in "persistent_cache" and using it to generate prefix for persistent cache. In this PR, i also re-enable related test cases defined in "db_test2" and "persistent_cache_test" for windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6932

Test Plan:
1. run related test cases in "db_test2" and "persistent_cache_test" on windows and see it passed.
2. manually run db_bench.exe with "read_cache_path" and verified.

Reviewed By: riversand963

Differential Revision: D21911608

Pulled By: cheng-chang

fbshipit-source-id: cdfd938d54a385edbb2836b13aaa1d39b0a6f1c2
2020-06-13 13:28:31 -07:00
Levi Tamasi
bacd6edcbe Turn HarnessTest in table_test into a parameterized test (#6974)
Summary:
`HarnessTest` in `table_test.cc` currently tests many parameter
combinations sequentially in a loop. This is problematic from
a testing perspective, since if the test fails, we have no way of
knowing how many/which combinations have failed. It can also cause timeouts on
our test system due to the sheer number of combinations tested.
(Specifically, the parallel compression threads parameter added by
https://github.com/facebook/rocksdb/pull/6262 seems to have been the last straw.)
There is some DIY code there that splits the load among eight test cases
but that does not appear to be sufficient anymore.

Instead, the patch turns `HarnessTest` into a parameterized test, so all the
parameter combinations can be tested separately and potentially
concurrently. It also cleans up the tests a little, fixes
`RandomizedLongDB`, which did not get updated when the parallel
compression threads parameter was added, and turns `FooterTests` into a
standalone test case (since it does not actually need a fixture class).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6974

Test Plan: `make check`

Reviewed By: siying

Differential Revision: D22029572

Pulled By: ltamasi

fbshipit-source-id: 51baea670771c33928f2eb3902bd69dcf540aa41
2020-06-12 17:31:06 -07:00
Andrew Kryczka
e6be168aa5 save a key comparison in block seeks (#6646)
Summary:
This saves up to two key comparisons in block seeks. The first key
comparison saved is a redundant key comparison against the restart key
where the linear scan starts. This comparison is saved in all cases
except when the found key is in the first restart interval. The
second key comparison saved is a redundant key comparison against the
restart key where the linear scan ends. This is only saved in cases
where all keys in the restart interval are less than the target
(probability roughly `1/restart_interval`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6646

Test Plan:
ran a benchmark with mostly default settings and counted key comparisons

before: `user_key_comparison_count = 19399529`
after: `user_key_comparison_count = 18431498`

setup command:

```
$ TEST_TMPDIR=/dev/shm/dbbench ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -max_background_jobs=12 -level_compaction_dynamic_level_bytes=true -num=10000000
```

benchmark command:

```
$ TEST_TMPDIR=/dev/shm/dbbench/ ./db_bench -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=10000000 -compression_type=none -reads=1000000 -perf_level=3
```

Reviewed By: pdillinger

Differential Revision: D20849707

Pulled By: ajkr

fbshipit-source-id: 1f01c5cd99ea771fd27974046e37b194f1cdcfac
2020-06-10 13:58:39 -07:00
Andrew Kryczka
02db03af8d make L0 index/filter pinned memory usage predictable (#6911)
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911

Test Plan: unit test

Reviewed By: siying

Differential Revision: D21835818

Pulled By: ajkr

fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
2020-06-09 16:51:23 -07:00
Yanqin Jin
3020df9df5 Remove unnecessary inclusion of version_edit.h in env (#6952)
Summary:
In db_options.c, we should avoid including header files in the `db` directory to avoid introducing unnecessary dependency. The reason why `version_edit.h` has been included in `db_options.cc` is because we need two constants, `kUnknownChecksum` and `kUnknownChecksumFuncName`. We can put these two constants as `constexpr` in the public header `file_checksum.h`.

Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6952

Reviewed By: zhichao-cao

Differential Revision: D21925341

Pulled By: riversand963

fbshipit-source-id: 2902f3b74c97f0cf16c58ad24c095c787c3a40e2
2020-06-07 21:56:55 -07:00
Zhichao Cao
f941adef88 Clean up the dead code (#6946)
Summary:
Remove the dead code in table test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6946

Test Plan: run table_test

Reviewed By: riversand963

Differential Revision: D21913563

Pulled By: zhichao-cao

fbshipit-source-id: c0aa9f3b95dfe87dd7fb2cd4823784f08cb3ddd3
2020-06-05 17:45:22 -07:00
anand76
98b0cbea88 Check iterator status BlockBasedTableReader::VerifyChecksumInBlocks() (#6909)
Summary:
The ```for``` loop in ```VerifyChecksumInBlocks``` only checks ```index_iter->Valid()``` which could be ```false``` either due to reaching the end of the index or, in case of partitioned index, it could be due to a checksum mismatch error when reading a 2nd level index block. Instead of throwing away the index iterator status, we need to return any errors back to the caller.

Tests:
Add a test in block_based_table_reader_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6909

Reviewed By: pdillinger

Differential Revision: D21833922

Pulled By: anand1976

fbshipit-source-id: bc778ebf1121dbbdd768689de5183f07a9f0beae
2020-06-05 11:08:25 -07:00
Peter Dillinger
c7432cc3c0 Fix more defects reported by Coverity Scan (#6935)
Summary:
Mostly uninitialized values: some probably written before use, but some seem like bugs. Also, destructor needs to be virtual, and possible use-after-free in test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6935

Test Plan: make check

Reviewed By: siying

Differential Revision: D21885484

Pulled By: pdillinger

fbshipit-source-id: e2e7cb0a0cf196f2b55edd16f0634e81f6cc8e08
2020-06-04 15:35:08 -07:00
sdong
afa3518839 Revert "Update googletest from 1.8.1 to 1.10.0 (#6808)" (#6923)
Summary:
This reverts commit 8d87e9cea1.

Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923

Reviewed By: pdillinger

Differential Revision: D21864799

fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
2020-06-03 15:55:03 -07:00
Peter Dillinger
9360776cb9 Fix handling of too-small filter partition size (#6905)
Summary:
Because ARM and some other platforms have a larger cache line
size, they have a larger minimum filter size, which causes recently
added PartitionedMultiGet test in db_bloom_filter_test to fail on those
platforms. The code would actually end up using larger partitions,
because keys_per_partition_ would be 0 and never == number of keys
added.

The code now attempts to get as close as possible to the small target
size, while fully utilizing that filter size, if the target partition
size is smaller than the minimum filter size.

Also updated the test to break more uniformly across platforms
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6905

Test Plan: updated test, tested on ARM

Reviewed By: anand1976

Differential Revision: D21840639

Pulled By: pdillinger

fbshipit-source-id: 11684b6d35f43d2e98b85ddb2c8dcfd59d670817
2020-06-03 10:43:01 -07:00
Zhichao Cao
2adb7e3768 Fix potential overflow of unsigned type in for loop (#6902)
Summary:
x.size() -1 or y - 1 can overflow to an extremely large value when x.size() pr y is 0 when they are unsigned type. The end condition of i in the for loop will be extremely large, potentially causes segment fault. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6902

Test Plan: pass make asan_check

Reviewed By: ajkr

Differential Revision: D21843767

Pulled By: zhichao-cao

fbshipit-source-id: 5b8b88155ac5a93d86246d832e89905a783bb5a1
2020-06-02 15:05:07 -07:00
Peter Dillinger
14eca6bf04 For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.

It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.

So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.

Also includes miscellaneous comment improvements / clarifications.

Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784

Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...

    [ RUN      ] DBTest.ApproximateSizesFilesWithErrorMargin
    db/db_test.cc:1562: Failure
    Expected: (size) <= (11 * 100), actual: 9478 vs 1100

Other tests updated to reflect consistent accounting of metadata.

Reviewed By: siying

Differential Revision: D21334706

Pulled By: pdillinger

fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
2020-06-02 12:30:23 -07:00
sdong
298b00a396 Reduce dependency on gtest dependency in release code (#6907)
Summary:
Release code now depends on gtest, indirectly through including "test_util/testharness.h". This creates multiple problems. One important reason is the definition of IGNORE_STATUS_IF_ERROR() in test_util/testharness.h. Move it to sync_point.h instead.
Note that utilities/cassandra/format.h still depends on "test_util/testharness.h". This will be resolved in a separate diff.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6907

Test Plan: Run all existing tests.

Reviewed By: ajkr

Differential Revision: D21829884

fbshipit-source-id: 9253c19ffde2936f3ae68998210f8e54f645a6e6
2020-06-02 12:11:24 -07:00
Adam Retter
8d87e9cea1 Update googletest from 1.8.1 to 1.10.0 (#6808)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6808

Reviewed By: anand1976

Differential Revision: D21483984

Pulled By: pdillinger

fbshipit-source-id: 70c5eff2bd54ddba469761d95e4cd4611fb8e598
2020-06-01 20:33:42 -07:00
anand76
66942e8158 Avoid unnecessary reads of uncompression dictionary in MultiGet (#6906)
Summary:
We may sometimes read the uncompression dictionary when its not
necessary, when we lookup a key in an SST file but the index indicates
the key is not present. This can happen with index_type 3.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6906

Test Plan: make check

Reviewed By: cheng-chang

Differential Revision: D21828944

Pulled By: anand1976

fbshipit-source-id: 7aef4f0a39548d0874eafefd2687006d2652f9bb
2020-06-01 19:43:37 -07:00
Cheng Chang
bcb9e41080 Explicitly free allocated buffer when status is not ok (#6903)
Summary:
Currently we rely on `BlockContents` to implicitly free the allocated scratch buffer, but when IO error happens, it doesn't make sense to construct the `BlockContents` which might be corrupted. In the stress test, we find that `assert(req.result.size() == block_size(handle));` fails because of potential IO errors.

In this PR, we explicitly free the scratch buffer on error without constructing `BlockContents`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6903

Test Plan: watch stress test

Reviewed By: anand1976

Differential Revision: D21823869

Pulled By: cheng-chang

fbshipit-source-id: 5603fc80e9bf3f44a9d7250ddebd871afe1eb89f
2020-06-01 15:19:40 -07:00
Andrew Kryczka
c5abf78bca avoid IterKey::UpdateInternalKey() in BlockIter (#6843)
Summary:
`IterKey::UpdateInternalKey()` is an error-prone API as it's
incompatible with `IterKey::TrimAppend()`, which is used for
decoding delta-encoded internal keys. This PR stops using it in
`BlockIter`. Instead, it assigns global seqno in a separate `IterKey`'s
buffer when needed. The logic for safely getting a Slice with global
seqno properly assigned is encapsulated in `GlobalSeqnoAppliedKey`.
`BinarySeek()` is also migrated to use this API (previously it ignored
global seqno entirely).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6843

Test Plan:
benchmark setup -- single file DBs, in-memory, no compression. "normal_db"
created by regular flush; "ingestion_db" created by ingesting a file. Both
DBs have same contents.

```
$ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000
$ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}')
$ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/
```

benchmark run command:
```
TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=10 -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=1048576000 -threads=1 -reads=40000000
```

results:

| DB | code | throughput |
|---|---|---|
| normal_db | master |  267.9 |
| normal_db   |    PR6843 | 254.2 (-5.1%) |
| ingestion_db |   master |  259.6 |
| ingestion_db |   PR6843 | 250.5 (-3.5%) |

Reviewed By: pdillinger

Differential Revision: D21562604

Pulled By: ajkr

fbshipit-source-id: 937596f836930515da8084d11755e1f247dcb264
2020-05-28 10:51:30 -07:00
Yanqin Jin
961c7590d6 Add timestamp to delete (#6253)
Summary:
Preliminary user-timestamp support for delete.

If ["a", ts=100] exists, you can delete it by calling `DB::Delete(write_options, key)` in which `write_options.timestamp` points to a `ts` higher than 100.

Implementation
A new ValueType, i.e. `kTypeDeletionWithTimestamp` is added for deletion marker with timestamp.
The reason for a separate `kTypeDeletionWithTimestamp`: RocksDB may drop tombstones (keys with kTypeDeletion) when compacting them to the bottom level. This is OK and useful if timestamp is disabled. When timestamp is enabled, should we still reuse `kTypeDeletion`, we may drop the tombstone with a more recent timestamp, causing deleted keys to re-appear.

Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6253

Reviewed By: ltamasi

Differential Revision: D20995328

Pulled By: riversand963

fbshipit-source-id: a9e5c22968ad76f98e3dc6ee0151265a3f0df619
2020-05-28 10:40:03 -07:00
Akanksha Mahajan
bcefc59e9f Allow MultiGet users to limit cumulative value size (#6826)
Summary:
1. Add a value_size in read options which limits the cumulative value size of keys read in batches. Once the size exceeds read_options.value_size, all the remaining keys are returned with status Abort without further fetching any key.
2. Add a unit test case MultiGetBatchedValueSizeSimple the reads keys from memory and sst files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6826

Test Plan:
1. make check -j64
	   2. Add a new unit test case

Reviewed By: anand1976

Differential Revision: D21471483

Pulled By: akankshamahajan15

fbshipit-source-id: dea51b8e76d5d1df38ece8cdb29933b1d798b900
2020-05-27 13:07:14 -07:00
Cheng Chang
82a82c76e7 Fix potential memory leak of scratch buffer (#6879)
Summary:
If `req.scratch` is an internally allocated buffer, but `raw_block_contents` is not constructed to own `req.scratch`, then `req.scratch` will be leaked.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6879

Test Plan: make asan_check

Reviewed By: anand1976

Differential Revision: D21728498

Pulled By: cheng-chang

fbshipit-source-id: 8fc6a4f2543918c565ddc16ecfad1807eb9a42cf
2020-05-26 15:29:04 -07:00
Andrew Kryczka
292bcf6227 skip direct I/O tests in rocksdb lite (#6867)
Summary:
Fix a couple places where direct I/O was used even though it is
unsupported in lite builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6867

Test Plan: `LITE=1 make check -j48`

Reviewed By: pdillinger

Differential Revision: D21689185

Pulled By: ajkr

fbshipit-source-id: 3eaa3abf69cd7d0bcaabbcad3bb5a26fb8dd7301
2020-05-21 13:57:17 -07:00
mrambacher
38be686160 Add Struct Type to OptionsTypeInfo (#6425)
Summary:
Added code for generically handing structs to OptionTypeInfo.  A struct is a collection of variables handled by their own map of OptionTypeInfos.  Examples of structs include Compaction and Cache options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6425

Reviewed By: siying

Differential Revision: D21668789

Pulled By: zhichao-cao

fbshipit-source-id: 064b110de39dadf82361ed4663f7ac1a535b0b07
2020-05-21 10:58:39 -07:00
Peter Dillinger
c7aedf1b48 Clean up some code related to file checksums (#6861)
Summary:
* Add missing unit test for schema stability of FileChecksumGenCrc32c
  (previously was only comparing to itself)
* A lot of clarifying comments
* Add some assertions for preconditions
* Rename WritableFileWriter::CalculateFileChecksum -> UpdateFileChecksum
* Simplify FileChecksumGenCrc32c with shared functions
* Implement EndianSwapValue to replace unused EndianTransform

And incidentally since I had trouble with 'make check-format' GitHub action disagreeing with local run,
* Output full diagnostic information when 'make check-format' fails in CI
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6861

Test Plan: new unit test passes before & after other changes

Reviewed By: zhichao-cao

Differential Revision: D21667115

Pulled By: pdillinger

fbshipit-source-id: 6a99970f87605aa024fa540c78cd519ff322c3e6
2020-05-21 08:12:51 -07:00
Zhichao Cao
545e14b53b Generate file checksum in SstFileWriter (#6859)
Summary:
If Option.file_checksum_gen_factory is set, rocksdb generates the file checksum during flush and compaction based on the checksum generator created by the factory and store the checksum and function name in vstorage and Manifest.

This PR enable file checksum generation in SstFileWrite and store the checksum and checksum function name in the  ExternalSstFileInfo, such that application can use them for other purpose, for example, ingest the file checksum with files in IngestExternalFile().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6859

Test Plan: add unit test and pass make asan_check.

Reviewed By: ajkr

Differential Revision: D21656247

Pulled By: zhichao-cao

fbshipit-source-id: 78a3570c76031d8832e3d2de3d6c79cdf2b675d0
2020-05-20 11:55:31 -07:00
Cheng Chang
91b7553293 Enable IO Uring in MultiGet in direct IO mode (#6815)
Summary:
Currently, in direct IO mode, `MultiGet` retrieves the data blocks one by one instead of in parallel, see `BlockBasedTable::RetrieveMultipleBlocks`.

Since direct IO is supported in `RandomAccessFileReader::MultiRead` in https://github.com/facebook/rocksdb/pull/6446, this PR applies `MultiRead` to `MultiGet` so that the data blocks can be retrieved in parallel.

Also, in direct IO mode and when data blocks are compressed and need to uncompressed, this PR only allocates one continuous aligned buffer to hold the data blocks, and then directly uncompress the blocks to insert into block cache, there is no longer intermediate copies to scratch buffers.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6815

Test Plan:
1. added a new unit test `BlockBasedTableReaderTest::MultiGet`.
2. existing unit tests and stress tests  contain tests against `MultiGet` in direct IO mode.

Reviewed By: anand1976

Differential Revision: D21426347

Pulled By: cheng-chang

fbshipit-source-id: b8446ae0e74152444ef9111e97f8e402ac31b24f
2020-05-14 23:26:26 -07:00
sdong
4a4b8a1344 sst_dump to reduce number of file reads (#6836)
Summary:
sst_dump can issue many file reads from the file system. This doesn't work well with file systems without a OS cache, especially remote file systems. In order to mitigate this problem, several improvements are done:
1. --readahead_size is added, so that users can specify readahead size when scanning the data.
2. Force a 512KB tail readahead, which prevents three I/Os for footer, meta index and property blocks and hopefully index and filter blocks too.
3. Consoldiate SSTDump's I/Os before opening the file for read. Use the same file prefetch buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6836

Test Plan: Add a test that covers this new feature.

Reviewed By: pdillinger

Differential Revision: D21516607

fbshipit-source-id: 3ae43526286f67b2f4a5bdedfbc92719d579b87e
2020-05-12 18:23:33 -07:00
Ziyue Yang
c384c08a4f Add tests for compression failure in BlockBasedTableBuilder (#6709)
Summary:
Currently there is no check for whether BlockBasedTableBuilder will expose
compression error status if compression fails during the table building.
This commit adds fake faulting compressors and a unit test to test such
cases.

This check finds 5 bugs, and this commit also fixes them:

1. Not handling compression failure well in
   BlockBasedTableBuilder::BGWorkWriteRawBlock.
2. verify_compression failing in BlockBasedTableBuilder when used with ZSTD.
3. Wrongly passing the same reference of block contents to
   BlockBasedTableBuilder::CompressAndVerifyBlock in parallel compression.
4. Wrongly setting block_rep->first_key_in_next_block to nullptr in
   BlockBasedTableBuilder::EnterUnbuffered when there are still incoming data
   blocks.
5. Not maintaining variables for compression ratio estimation and first_block
   in BlockBasedTableBuilder::EnterUnbuffered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6709

Reviewed By: ajkr

Differential Revision: D21236254

fbshipit-source-id: 101f6e62b2bac2b7be72be198adf93cd32a1ff46
2020-05-12 09:27:35 -07:00
Peter Dillinger
b27a1448b6 Fix false NotFound from batched MultiGet with kHashSearch (#6821)
Summary:
The error is assigning KeyContext::s to NotFound status in a
table reader for a "not found in this table" case, which skips searching
in later tables, like only a delete should. (The hash search index iterator
is the only one that can return status NotFound even if Valid() == false.)

This was detected by intermittent failure in
MultiThreadedDBTest.MultiThreaded/5, a kHashSearch configuration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6821

Test Plan: modified existing unit test to reproduce problem

Reviewed By: anand1976

Differential Revision: D21450469

Pulled By: pdillinger

fbshipit-source-id: 7478003684d637dbd491cdac81468041a791be2c
2020-05-07 15:41:37 -07:00
mrambacher
394f2bbd13 Add OptionTypeInfo::Enum and related methods (#6423)
Summary:
Add methods and constructors for handling enums to the OptionTypeInfo.  This change allows enums to be converted/compared without adding a special "type" to the OptionType.

This change addresses a couple of issues:
- It allows new enumerated types to be added to the options without editing the OptionType base class (and related methods)
- It standardizes the procedure for adding enumerated types to the options, reducing potential mistakes
- It moves the enum maps to the location where they are used, allowing them to be static file members rather than global values
- It reduces the number of types and cases that need to be handled in the various OptionType methods
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6423

Reviewed By: siying

Differential Revision: D21408713

Pulled By: zhichao-cao

fbshipit-source-id: fc492af285d011822578b95d186a0fce25d35626
2020-05-05 15:04:04 -07:00
sdong
079e50d2ba Disallow BlockBasedTableBuilder to set status from non-OK (#6776)
Summary:
There is no systematic mechanism to prevent BlockBasedTableBuilder's status to be set from non-OK to OK. Adding a mechanism to force this will help us prevent failures in the future.

The solution is to only make it possible to set the status code if the status code to set is not OK.

Since the status code passed to CompressAndVerifyBlock() is changed, a mini refactoring is done too so that the output arguments are changed from reference to pointers, based on Google C++ Style.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6776

Test Plan: Run all existing test.

Reviewed By: pdillinger

Differential Revision: D21314382

fbshipit-source-id: 27000c10f1e4c121661e026548d6882066409375
2020-04-30 15:37:03 -07:00
anand76
ab13d43e1d Pass a timeout to FileSystem for random reads (#6751)
Summary:
Calculate ```IOOptions::timeout``` using ```ReadOptions::deadline``` and pass it to ```FileSystem::Read/FileSystem::MultiRead```. This allows us to impose a tighter bound on the time taken by Get/MultiGet on FileSystem/Envs that support IO timeouts. Even on those that don't support, check in ```RandomAccessFileReader::Read``` and ```MultiRead``` and return ```Status::TimedOut()``` if the deadline is exceeded.

For now, TableReader creation, which might do file opens and reads, are not covered. It will be implemented in another PR.

Tests:
Update existing unit tests to verify the correct timeout value is being passed
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6751

Reviewed By: riversand963

Differential Revision: D21285631

Pulled By: anand1976

fbshipit-source-id: d89af843e5a91ece866e87aa29438b52a65a8567
2020-04-30 14:50:39 -07:00
Peter Dillinger
eecd8fba46 Fix assertion that can fail on sst corruption (#6780)
Summary:
An assertion that a char == a CompressionType (unsigned char)
originally cast from a char can fail if the original value is negative,
due to numeric promotion.  The assertion should pass even if the value
is invalid CompressionType, because the callee
UncompressBlockContentsForCompressionType checks for that and reports
status appropriately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6780

Test Plan:
Temporarily change kZSTD = 0x88 and see tests fail. Make this
change (in addition), and tests pass.

Reviewed By: siying

Differential Revision: D21328498

Pulled By: pdillinger

fbshipit-source-id: 61caf8d815581ce49261ecb7ab0f396e9ac4bb92
2020-04-30 12:11:00 -07:00
mrambacher
618bf638aa Add Functions to OptionTypeInfo (#6422)
Summary:
Added functions for parsing, serializing, and comparing elements to OptionTypeInfo.  These functions allow all of the special cases that could not be handled directly in the map of OptionTypeInfo to be moved into the map.  Using these functions, every type can be handled via the map rather than special cased.

By adding these functions, the code for handling options can become more standardized (fewer special cases) and (eventually) handled completely by common classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6422

Test Plan: pass make check

Reviewed By: siying

Differential Revision: D21269005

Pulled By: zhichao-cao

fbshipit-source-id: 9ba71c721a38ebf9ee88259d60bd81b3282b9077
2020-04-28 18:04:26 -07:00
Peter Dillinger
bae6f58696 Basic MultiGet support for partitioned filters (#6757)
Summary:
In MultiGet, access each applicable filter partition only once
per batch, rather than for each applicable key. Also,

* Fix Bloom stats for MultiGet
* Fix/refactor MultiGetContext::Range::KeysLeft, including
* Add efficient BitsSetToOne implementation
* Assert that MultiGetContext::Range does not go beyond shift range

Performance test: Generate db:

    $ ./db_bench --benchmarks=fillrandom --num=15000000 --cache_index_and_filter_blocks -bloom_bits=10 -partition_index_and_filters=true
    ...

Before (middle performing run of three; note some missing Bloom stats):

    $ ./db_bench --use-existing-db --benchmarks=multireadrandom --num=15000000 --cache_index_and_filter_blocks --bloom_bits=10 --threads=16 --cache_size=20000000 -partition_index_and_filters -batch_size=32 -multiread_batched -statistics --duration=20 2>&1 | egrep 'micros/op|block.cache.filter.hit|bloom.filter.(full|use)|number.multiget'
    multireadrandom :      26.403 micros/op 597517 ops/sec; (548427 of 671968 found)
    rocksdb.block.cache.filter.hit COUNT : 83443275
    rocksdb.bloom.filter.useful COUNT : 0
    rocksdb.bloom.filter.full.positive COUNT : 0
    rocksdb.bloom.filter.full.true.positive COUNT : 7931450
    rocksdb.number.multiget.get COUNT : 385984
    rocksdb.number.multiget.keys.read COUNT : 12351488
    rocksdb.number.multiget.bytes.read COUNT : 793145000
    rocksdb.number.multiget.keys.found COUNT : 7931450

After (middle performing run of three):

    $ ./db_bench_new --use-existing-db --benchmarks=multireadrandom --num=15000000 --cache_index_and_filter_blocks --bloom_bits=10 --threads=16 --cache_size=20000000 -partition_index_and_filters -batch_size=32 -multiread_batched -statistics --duration=20 2>&1 | egrep 'micros/op|block.cache.filter.hit|bloom.filter.(full|use)|number.multiget'
    multireadrandom :      21.024 micros/op 752963 ops/sec; (705188 of 863968 found)
    rocksdb.block.cache.filter.hit COUNT : 49856682
    rocksdb.bloom.filter.useful COUNT : 45684579
    rocksdb.bloom.filter.full.positive COUNT : 10395458
    rocksdb.bloom.filter.full.true.positive COUNT : 9908456
    rocksdb.number.multiget.get COUNT : 481984
    rocksdb.number.multiget.keys.read COUNT : 15423488
    rocksdb.number.multiget.bytes.read COUNT : 990845600
    rocksdb.number.multiget.keys.found COUNT : 9908456

So that's about 25% higher throughput even for random keys
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6757

Test Plan: unit test included

Reviewed By: anand1976

Differential Revision: D21243256

Pulled By: pdillinger

fbshipit-source-id: 5644a1468d9e8c8575be02f4e04bc5d62dbbb57f
2020-04-28 14:49:34 -07:00
Yanqin Jin
d4398e08fc Fix timestamp support for MultiGet (#6748)
Summary:
1. Avoid nullptr dereference when passing timestamp to KeyContext creation.
2. Construct LookupKey correctly with timestamp when creating MultiGetContext.
3. Compare without timestamp when sorting KeyContexts.

Fixes https://github.com/facebook/rocksdb/issues/6745

Test plan (dev server):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6748

Reviewed By: pdillinger

Differential Revision: D21258691

Pulled By: riversand963

fbshipit-source-id: 44e65b759c18b9986947783edf03be4f890bb004
2020-04-27 22:49:56 -07:00
Peter Dillinger
249eff0f30 Stats for redundant insertions into block cache (#6681)
Summary:
Since read threads do not coordinate on loading data into block
cache, two threads between Lookup and Insert can end up loading and
inserting the same data. This is particularly concerning with
cache_index_and_filter_blocks since those are hot and more likely to
be race targets if ejected from (or not pre-populated in) the cache.

Particularly with moves toward disaggregated / network storage, the cost
of redundant retrieval might be high, and we should at least have some
hard statistics from which we can estimate impact.

Example with full filter thrashing "cliff":

    $ ./db_bench --benchmarks=fillrandom --num=15000000 --cache_index_and_filter_blocks -bloom_bits=10
    ...
    $ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((130 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
    rocksdb.block.cache.add COUNT : 14181
    rocksdb.block.cache.add.failures COUNT : 0
    rocksdb.block.cache.add.redundant COUNT : 476
    rocksdb.block.cache.data.add COUNT : 12749
    rocksdb.block.cache.data.add.redundant COUNT : 18
    rocksdb.block.cache.filter.add COUNT : 1003
    rocksdb.block.cache.filter.add.redundant COUNT : 217
    rocksdb.block.cache.index.add COUNT : 429
    rocksdb.block.cache.index.add.redundant COUNT : 241
    $ ./db_bench --db=/tmp/rocksdbtest-172704/dbbench --use_existing_db --benchmarks=readrandom,stats --num=200000 --cache_index_and_filter_blocks --cache_size=$((120 * 1024 * 1024)) --bloom_bits=10 --threads=16 -statistics 2>&1 | egrep '^rocksdb.block.cache.(.*add|.*redundant)' | grep -v compress | sort
    rocksdb.block.cache.add COUNT : 1182223
    rocksdb.block.cache.add.failures COUNT : 0
    rocksdb.block.cache.add.redundant COUNT : 302728
    rocksdb.block.cache.data.add COUNT : 31425
    rocksdb.block.cache.data.add.redundant COUNT : 12
    rocksdb.block.cache.filter.add COUNT : 795455
    rocksdb.block.cache.filter.add.redundant COUNT : 130238
    rocksdb.block.cache.index.add COUNT : 355343
    rocksdb.block.cache.index.add.redundant COUNT : 172478
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6681

Test Plan: Some manual testing (above) and unit test covering key metrics is included

Reviewed By: ltamasi

Differential Revision: D21134113

Pulled By: pdillinger

fbshipit-source-id: c11497b5f00f4ffdfe919823904e52d0a1a91d87
2020-04-27 13:20:27 -07:00
Cheng Chang
40497a875a Reduce memory copies when fetching and uncompressing blocks from SST files (#6689)
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.

Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.

In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689

Test Plan: A new unit test `block_fetcher_test` is added.

Reviewed By: anand1976

Differential Revision: D21006729

Pulled By: cheng-chang

fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
2020-04-24 15:32:56 -07:00
anand76
9e7b7e2c08 Silence false alarms in db_stress fault injection (#6741)
Summary:
False alarms are caused by codepaths that intentionally swallow IO
errors.

Tests:
make crash_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6741

Reviewed By: ltamasi

Differential Revision: D21181138

Pulled By: anand1976

fbshipit-source-id: 5ccfbc68eb192033488de6269e59c00f2c65ce00
2020-04-24 13:06:12 -07:00
Ibrahim Jarif
ae77880223 Fix some typos in code comments (#6733)
Summary:
This PR fixes some typos in code comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6733

Reviewed By: siying

Differential Revision: D21209037

Pulled By: zhichao-cao

fbshipit-source-id: d9274611fab1f5e992998c8c4117b8078c4cbc69
2020-04-23 12:28:49 -07:00
mrambacher
4cbc19d2a1 Add a ConfigOptions for use in comparing objects and converting to/from strings (#6389)
Summary:
The methods in convenience.h are used to compare/convert objects to/from strings.  There is a mishmash of parameters in use here with more needed in the future.  This PR replaces those parameters with a single structure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6389

Reviewed By: siying

Differential Revision: D21163707

Pulled By: zhichao-cao

fbshipit-source-id: f807b4cc7e2b0af3871536b69546b2604dfa81bd
2020-04-21 17:38:17 -07:00
Andrew Kryczka
f9155a3404 Prevent uninitialized load in IndexBlockIter (#6736)
Summary:
When index block is empty or an error happens while reading it,
`Invalidate()` is called rather than `Initialize()`. So `Seek()` must
not refer to member variables that are only initialized in
`Initialize()` until it is sure `Initialize()` has been called.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6736

Reviewed By: siying

Differential Revision: D21139641

Pulled By: ajkr

fbshipit-source-id: 71c58cc1adbd795dc3729dd5023bf7df1515ff32
2020-04-20 16:32:43 -07:00
Peter Dillinger
31da5e34c1 C++20 compatibility (#6697)
Summary:
Based on https://github.com/facebook/rocksdb/issues/6648 (CLA Signed), but heavily modified / extended:

* Implicit capture of this via [=] deprecated in C++20, and [=,this] not standard before C++20 -> now using explicit capture lists
* Implicit copy operator deprecated in gcc 9 -> add explicit '= default' definition
* std::random_shuffle deprecated in C++17 and removed in C++20 -> migrated to a replacement in RocksDB random.h API
* Add the ability to build with different std version though -DCMAKE_CXX_STANDARD=11/14/17/20 on the cmake command line
* Minimal rebuild flag of MSVC is deprecated and is forbidden with /std:c++latest (C++20)
* Added MSVC 2019 C++11 & MSVC 2019 C++20 in AppVeyor
* Added GCC 9 C++11 & GCC9 C++20 in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6697

Test Plan: make check and CI

Reviewed By: cheng-chang

Differential Revision: D21020318

Pulled By: pdillinger

fbshipit-source-id: 12311be5dbd8675a0e2c817f7ec50fa11c18ab91
2020-04-20 13:24:25 -07:00
Peter Dillinger
45d2b4efca Fix tabs and lint-ignores (#6734)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6734

Reviewed By: cheng-chang

Differential Revision: D21134556

Pulled By: pdillinger

fbshipit-source-id: 3636cc1d1333137b70031f8277458781c21631fb
2020-04-20 11:39:31 -07:00
Mike Kolupaev
e45673dece Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621)
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.

Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.

It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.

Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621

Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.

Reviewed By: siying

Differential Revision: D20786930

Pulled By: al13n321

fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-15 17:40:44 -07:00
Ziyue Yang
41563b61db Fix data racing of BlockBasedTableBuilder::ParallelCompressionRep::first_block (#6640)
Summary:
BlockBasedTableBuilder::ParallelCompressionRep::first_block can be read in
Flush() and written in BGWorkWriteRawBlock() concurrently. This commit fixes
the issue by reading first_block out before pushing the block to compression
and write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6640

Test Plan: Run all tests concurrently with TSAN.

Reviewed By: cheng-chang

Differential Revision: D20851370

fbshipit-source-id: 6f039222e8319d31e15f1b45e05c106527253f72
2020-04-13 16:24:57 -07:00
Andrew Kryczka
9eca6d651d fix comparison count for format_version=3 indexes (#6650)
Summary:
In index blocks since `format_version=3`, user keys are written
rather than internal keys. When reading such blocks, the comparator is
obtained via `InternalKeyComparator::user_comparator()`. That function
must not return an unwrapped result as the wrapper class provides
accounting logic to populate `PerfContext::user_key_comparison_count`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6650

Test Plan:
ran db_bench and verified
`PerfContext::user_key_comparison_count` became larger.

Reviewed By: cheng-chang

Differential Revision: D20866325

Pulled By: ajkr

fbshipit-source-id: ad755d46bda31157dacc5b66e532279f19ad538c
2020-04-13 11:18:37 -07:00
anand76
79c838eb0f Fix a few bugs in db_stress fault injection (#6693)
Summary:
Fix the following issues -
1. Output parsing error in db_crashtest.py
2. Memory leak on exit
3. False alarm on filter block read error
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6693

Test Plan: asan_crash

Reviewed By: cheng-chang

Differential Revision: D20990399

Pulled By: anand1976

fbshipit-source-id: 178ee0dd7c69a4bc5db698379db0dedb29281699
2020-04-13 11:01:03 -07:00
anand76
5c19a441c4 Fault injection in db_stress (#6538)
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538

Test Plan:
crash_test
make check

Reviewed By: riversand963

Differential Revision: D20714347

Pulled By: anand1976

fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
2020-04-10 17:21:26 -07:00
anand76
d600e5b0eb Fix a Centos build failure reported in #6651 (#6656)
Summary:
Fixes issue https://github.com/facebook/rocksdb/issues/6651

Tests:
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6656

Reviewed By: cheng-chang

Differential Revision: D20879084

Pulled By: anand1976

fbshipit-source-id: c2cc508ca2716fcf80dcf9d2ba31c32d211f941e
2020-04-10 11:47:46 -07:00
Yi Wu
eb287c72d7 Fix wrong key being read on ingested file with global seqno and delta encoding (#6669)
Summary:
On reading an ingested SST file, `DataBlockIter` will replace seqno encoded in a key with global seqno. However, if the original seqno was part of the prefix used for the next key, the global seqno is by mistake used as part of the prefix to construct the next key, causing wrong result being returned. Although at this point it is only software error while data in the file is not corrupted, the issue can further cause compaction output out of order and corrupted result when the ingested SST participated in compaction. Fixing the issue by save the actual seqno and restore it before the key being used as prefix to construct next key.

The unit test is by Little-Wallace from https://github.com/facebook/rocksdb/issues/6666. Fixing https://github.com/facebook/rocksdb/issues/6666.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6669

Test Plan:
New unit test

Signed-off-by: Yi Wu <yiwu@pingcap.com>

Reviewed By: cheng-chang

Differential Revision: D20931808

Pulled By: ajkr

fbshipit-source-id: f01959c35d6a493954dca981663766c7a5a9e8ab
2020-04-08 21:22:15 -07:00
anand76
fcd7bee925 Properly account block_decompress_time (#6658)
Summary:
It was incorrectly counting time even for blocks that didn't need decompression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6658

Test Plan: make check

Reviewed By: ajkr

Differential Revision: D20883522

Pulled By: anand1976

fbshipit-source-id: 33c9c4683f54cad150ab260a69e3ef8aa9aff76a
2020-04-07 12:53:59 -07:00
sdong
00f8016b36 Fix clang anaylze warning caused by #6262 (#6641)
Summary:
https://github.com/facebook/rocksdb/pull/6262 causes CLANG analyze to complain. Add assertion to suppress the warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6641

Test Plan: Run "clang analyze" and make sure it passes.

Reviewed By: anand1976

Differential Revision: D20841722

fbshipit-source-id: 5fa6e0c5cfe7a822214c9b898a408df59d4fd2cd
2020-04-03 15:47:51 -07:00
mrambacher
259b6ec8da Move the OptionTypeMap code closer to home (#6198)
Summary:
This is a predecessor to the Configurable PR.  This change moves the OptionTypeInfo maps closer to where they will be used.

When the Configurable changes are adopted, these values will become static and not associated with the OptionsHelper.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6198

Reviewed By: siying

Differential Revision: D20778108

Pulled By: zhichao-cao

fbshipit-source-id: a9f85fc73bc53503656e1958ecc1e764052fd1aa
2020-04-03 10:52:38 -07:00
Burton Li
df62cd5b35 Fix msvc debug test failures (#6579)
Summary:
1. stats_history_test: one slice of stats history is 12526 Bytes, which is greater than original assumption.
![image](https://user-images.githubusercontent.com/17753898/77381970-5a611a80-6d3c-11ea-9d64-59d2e3c04f79.png)
2. table_test: in VerifyBlockAccessTrace function, release trace reader before delete trace file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6579

Reviewed By: siying

Differential Revision: D20767373

Pulled By: pdillinger

fbshipit-source-id: e8647d665cbe83a3f5429639c6219b50c0912124
2020-04-03 09:54:25 -07:00
sdong
d0f3894cf1 In block based table builder, make variables for estimating file size atomic (#6636)
Summary:
With https://github.com/facebook/rocksdb/issues/6262, TSAN complains about data race of some variables. Those variables are used to estimate file size and are accessed in writer and background threads. Since file size estimation doesn't have to be 100% accurate, we make some variables atomic and use relaxed memory order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6636

Test Plan: Run all tests with TSAN.

Reviewed By: anand1976

Differential Revision: D20820635

fbshipit-source-id: 1ea45ff38be15e33674ffe06b7d42fc9fe161ea5
2020-04-02 16:16:24 -07:00
Ziyue Yang
8088482dd6 Fix a division by zero after #6262 (#6633)
Summary:
With https://github.com/facebook/rocksdb/issues/6262, UBSAN fails with "division by zero":

[ RUN      ] Timestamp/DBBasicTestWithTimestampCompressionSettings.PutAndGetWithCompaction/3
internal_repo_rocksdb/repo/table/block_based/block_based_table_builder.cc:1066:39: runtime error: division by zero
    #0 0x7ffb3117b071 in rocksdb::BlockBasedTableBuilder::WriteRawBlock(rocksdb::Slice const&, rocksdb::CompressionType, rocksdb::BlockHandle*, bool) internal_repo_rocksdb/repo/table/block_based/block_based_table_builder.cc:1066
    https://github.com/facebook/rocksdb/issues/1 0x7ffb311775e1 in rocksdb::BlockBasedTableBuilder::WriteBlock(rocksdb::Slice const&, rocksdb::BlockHandle*, bool) internal_repo_rocksdb/repo/table/block_based/block_based_table_builder.cc:848
    https://github.com/facebook/rocksdb/issues/2 0x7ffb311771a2 in rocksdb::BlockBasedTableBuilder::WriteBlock(rocksdb::BlockBuilder*, rocksdb::BlockHandle*, bool) internal_repo_rocksdb/repo/table/block_based/block_based_table_builder.cc:832

This is caused by not returning immediately after CompressAndVerifyBlock call
in WriteBlock when rep_->status == kBuffered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6633

Test Plan: Run all existing test.

Reviewed By: anand1976

Differential Revision: D20808366

fbshipit-source-id: 09f24b7c0fbaf4c7a8fc48cac61fa6fcb9b85811
2020-04-02 11:57:05 -07:00
Ziyue Yang
03a781a90c Add pipelined & parallel compression optimization (#6262)
Summary:
This PR adds support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6262

Reviewed By: ajkr

Differential Revision: D20651306

fbshipit-source-id: 62125590a9c15b6d9071def9dc72589c1696a4cb
2020-04-01 16:40:18 -07:00
Levi Tamasi
e6f86cfb36 Revert the recent cache deleter change (#6620)
Summary:
Revert "Use function objects as deleters in the block cache (https://github.com/facebook/rocksdb/issues/6545)"

    This reverts commit 6301dbe7a7.

    Revert "Call out the cache deleter related interface change in HISTORY.md (https://github.com/facebook/rocksdb/issues/6606)"

    This reverts commit 3a35542f86.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6620

Test Plan: `make check`

Reviewed By: zhichao-cao

Differential Revision: D20773311

Pulled By: ltamasi

fbshipit-source-id: 7637a761f718f323ef0e7da959462e8fb06e7a2b
2020-03-31 16:11:06 -07:00
sdong
80979f81c7 Make options.bottommost_compression, compression_opts and bottommost_compression_opts dynamically changeable. (#6615)
Summary:
These three options should be made dynamically changeable. Simply add them to MutableCFOptions and made the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6615

Test Plan: Add a unit test to make sure that SetOptions() can change the options.

Reviewed By: riversand963

Differential Revision: D20755951

fbshipit-source-id: 8165f4fd7a7a665cc7fb049698935022a5d2e7ff
2020-03-31 12:11:42 -07:00
Zhichao Cao
2ae91c6097 Fix potential memory leak in table_test (#6611)
Summary:
The checksum generator should be released if file_writer fails to reset the pointer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6611

Test Plan: pass make asan_check

Reviewed By: riversand963

Differential Revision: D20742964

Pulled By: zhichao-cao

fbshipit-source-id: cde41be2edb3d1e56083c2b93e1510fb32556146
2020-03-30 14:11:27 -07:00
Zhichao Cao
e8d332d97e Use FileChecksumGenFactory for SST file checksum (#6600)
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600

Test Plan: tested with make asan_check

Reviewed By: riversand963

Differential Revision: D20717670

Pulled By: zhichao-cao

fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
2020-03-29 15:58:46 -07:00
Cheng Chang
ee50b8d499 Be able to decrease background thread's CPU priority when creating database backup (#6602)
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.

This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602

Test Plan: make check

Reviewed By: siying, zhichao-cao

Differential Revision: D20683216

Pulled By: cheng-chang

fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
2020-03-28 19:07:25 -07:00
Zhichao Cao
4246888101 Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.

The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487

Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check

Reviewed By: anand1976

Differential Revision: D20685017

Pulled By: zhichao-cao

fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
2020-03-27 16:04:43 -07:00
Levi Tamasi
6301dbe7a7 Use function objects as deleters in the block cache (#6545)
Summary:
As the first step of reintroducing eviction statistics for the block
cache, the patch switches from using simple function pointers as deleters
to function objects implementing an interface. This will enable using
deleters that have state, like a smart pointer to the statistics object
that is to be updated when an entry is removed from the cache. For now,
the patch adds a deleter template class `SimpleDeleter`, which simply
casts the `value` pointer to its original type and calls `delete` or
`delete[]` on it as appropriate. Note: to prevent object lifecycle
issues, deleters must outlive the cache entries referring to them;
`SimpleDeleter` ensures this by using the ("leaky") Meyers singleton
pattern.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6545

Test Plan: `make asan_check`

Reviewed By: siying

Differential Revision: D20475823

Pulled By: ltamasi

fbshipit-source-id: fe354c33dd96d9bafc094605462352305449a22a
2020-03-26 16:19:58 -07:00
Mike Kolupaev
963af52f15 Fix iterator reading filter block despite read_tier == kBlockCacheTier (#6562)
Summary:
We're seeing iterators with `ReadOptions::read_tier == kBlockCacheTier` sometimes doing file reads. Stack trace:

```
rocksdb::RandomAccessFileReader::Read(unsigned long, unsigned long, rocksdb::Slice*, char*, bool) const
rocksdb::BlockFetcher::ReadBlockContents()
rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*) const
rocksdb::Status rocksdb::BlockBasedTable::RetrieveBlock<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, bool, bool) const
rocksdb::FilterBlockReaderCommon<rocksdb::ParsedFullFilterBlock>::ReadFilterBlock(rocksdb::BlockBasedTable const*, rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*)
rocksdb::FilterBlockReaderCommon<rocksdb::ParsedFullFilterBlock>::GetOrReadFilterBlock(bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*) const
rocksdb::FullFilterBlockReader::MayMatch(rocksdb::Slice const&, bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*) const
rocksdb::FullFilterBlockReader::RangeMayExist(rocksdb::Slice const*, rocksdb::Slice const&, rocksdb::SliceTransform const*, rocksdb::Comparator const*, rocksdb::Slice const*, bool*, bool, rocksdb::BlockCacheLookupContext*)
rocksdb::BlockBasedTable::PrefixMayMatch(rocksdb::Slice const&, rocksdb::ReadOptions const&, rocksdb::SliceTransform const*, bool, rocksdb::BlockCacheLookupContext*) const
rocksdb::BlockBasedTableIterator<rocksdb::DataBlockIter, rocksdb::Slice>::SeekImpl(rocksdb::Slice const*)
rocksdb::ForwardIterator::SeekInternal(rocksdb::Slice const&, bool)
rocksdb::DBIter::Seek(rocksdb::Slice const&)
```

`BlockBasedTableIterator::CheckPrefixMayMatch` was missing a check for `kBlockCacheTier`. This PR adds it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6562

Test Plan: deployed it to a logdevice test cluster and looked at logdevice's IO tracing.

Reviewed By: siying

Differential Revision: D20529368

Pulled By: al13n321

fbshipit-source-id: 65bf33964b1951464415c900336635fb20919611
2020-03-26 15:21:26 -07:00
Huisheng Liu
a6ce5c823b multiget support for timestamps (#6483)
Summary:
Add timestamp support for MultiGet().
timestamp from readoptions is honored, and timestamps can be returned along with values.

MultiReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 17bef7d3a):
  multireadrandom :     104.173 micros/op 307167 ops/sec; (5462999 of 5462999 found)
This PR:
  multireadrandom :     104.199 micros/op 307095 ops/sec; (5307999 of 5307999 found)

.\db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=multireadrandom --use_existing_db=1 --num=25000000 --threads=32 --allow_concurrent_memtable_write=0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6483

Reviewed By: anand1976

Differential Revision: D20498373

Pulled By: riversand963

fbshipit-source-id: 8505f22bc40fd791bc7dd05e48d7e67c91edb627
2020-03-24 11:24:09 -07:00
Cheng Chang
4fc216649d Support direct IO in RandomAccessFileReader::MultiRead (#6446)
Summary:
By supporting direct IO in RandomAccessFileReader::MultiRead, the benefits of parallel IO (IO uring) and direct IO can be combined.

In direct IO mode, read requests are aligned and merged together before being issued to RandomAccessFile::MultiRead, so blocks in the original requests might share the same underlying buffer, the shared buffers are returned in `aligned_bufs`, which is a new parameter of the `MultiRead` API.

For example, suppose alignment requirement for direct IO is 4KB, one request is (offset: 1KB, len: 1KB), another request is (offset: 3KB, len: 1KB), then since they all belong to page (offset: 0, len: 4KB), `MultiRead` only reads the page with direct IO into a buffer on heap, and returns 2 Slices referencing regions in that same buffer. See `random_access_file_reader_test.cc` for more examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6446

Test Plan: Added a new test `random_access_file_reader_test.cc`.

Reviewed By: anand1976

Differential Revision: D20097518

Pulled By: cheng-chang

fbshipit-source-id: ca48a8faf9c3af146465c102ef6b266a363e78d1
2020-03-20 16:33:26 -07:00
sdong
712bc4b6a2 Fix regression bug in partitioned index reseek caused by #6531 (#6551)
Summary:
https://github.com/facebook/rocksdb/pull/6531 removed some code in partitioned index seek logic. By mistake the logic of storing previous index offset is removed, while the logic of using it is preserved, so that the code might use wrong value to determine reseeking condition.
This will trigger a bug, if following a Seek() not going to the last block, SeekToLast() is called, and then Seek() is called which should position the cursor to the block before SeekToLast().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6551

Test Plan: Add a unit test that reproduces the bug. In the same unit test, also some reseek cases are covered to avoid regression.

Reviewed By: pdillinger

Differential Revision: D20493990

fbshipit-source-id: 3919aa4861c0481ec96844e053048da1a934b91d
2020-03-17 12:33:10 -07:00
akankshamahajan
a8149aef1e Allow table/sst_file_reader_test.cc to use custom Env (#6536)
Summary:
Allowing table/sst_file_reader_test.cc to use custom Env specified by TEST_ENV_URI.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6536

Reviewed By: riversand963

Differential Revision: D20448525

Pulled By: akankshamahajan15

fbshipit-source-id: 74e4d34c8ac4c2743741e78bf599571a4a465459
2020-03-17 11:02:13 -07:00
Yanqin Jin
098dce2d1a Fix compiler warning treated as error (#6547)
Summary:
Define a private member variable only in debug mode. Without fix, build will fail
```
In file included from table/block_based/partitioned_index_iterator.cc:9:
./table/block_based/partitioned_index_iterator.h:125:32: error: private field 'icomp_' is not used [-Werror,-Wunused-private-field]
  const InternalKeyComparator& icomp_;
```

Test plan (dev server)
1. make check
2. Make sure fixed in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6547

Reviewed By: siying

Differential Revision: D20480027

Pulled By: pdillinger

fbshipit-source-id: 288bc94280e240c3136335b6c73eb1ccb0db459d
2020-03-17 09:59:28 -07:00
sdong
d66908091d De-template block based table iterator (#6531)
Summary:
Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done:
1. Copy the block based iterator code into partitioned index iterator, and de-template them.
2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks.
3. Separate out the prefetch logic to a helper class and both classes call them.

This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531

Test Plan: build using make and cmake. And build release

Differential Revision: D20473108

fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f
2020-03-16 12:20:50 -07:00
sdong
674cf41732 Divide block_based_table_reader.cc (#6527)
Summary:
block_based_table_reader.cc is a giant file, which makes it hard for users to navigate the code. Divide the files to multiple files.
Some class templates cannot be moved to .cc file. They are moved to .h files. It is still better than including them all in block_based_table_reader.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6527

Test Plan: "make all check" and "make release". Also build using cmake.

Differential Revision: D20428455

fbshipit-source-id: ca713c698469f07f35bc0c271358c0874ed4eb28
2020-03-12 21:41:50 -07:00
Yanqin Jin
d93812c9ae Iterator with timestamp (#6255)
Summary:
Preliminary support for iterator with user timestamp. Current implementation does not consider merge operator and reverse iterator. Auto compaction is also disabled in unit tests.

Create an iterator with timestamp.
```
...
read_opts.timestamp = &ts;
auto* iter = db->NewIterator(read_opts);
// target is key without timestamp.
for (iter->Seek(target); iter->Valid(); iter->Next()) {}
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {}
delete iter;
read_opts.timestamp = &ts1;
// lower_bound and upper_bound are without timestamp.
read_opts.iterate_lower_bound = &lower_bound;
read_opts.iterate_upper_bound = &upper_bound;
auto* iter1 = db->NewIterator(read_opts);
// Do Seek or SeekToFirst()
delete iter1;
```

Test plan (dev server)
```
$make check
```

Simple benchmarking (dev server)
1. The overhead introduced by this PR even when timestamp is disabled.
key size: 16 bytes
value size: 100 bytes
Entries: 1000000
Data reside in main memory, and try to stress iterator.
Repeated three times on master and this PR.
- Seek without next
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3
```
master: 159047.0 ops/sec
this PR: 158922.3 ops/sec (2% drop in throughput)
- Seek and next 10 times
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3 -seek_nexts=10
```
master: 109539.3 ops/sec
this PR: 107519.7 ops/sec (2% drop in throughput)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6255

Differential Revision: D19438227

Pulled By: riversand963

fbshipit-source-id: b66b4979486f8474619f4aa6bdd88598870b0746
2020-03-06 16:24:27 -08:00
Cheng Chang
0a0151fb99 Remove memcpy from RandomAccessFileReader::Read in direct IO mode (#6455)
Summary:
In direct IO mode, RandomAccessFileReader::Read allocates an internal aligned buffer, and then copies the result into the scratch buffer. If the result is only temporarily used inside a function, there is no need to do the memcpy and just let the result Slice refer to the internally allocated buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6455

Test Plan: make check

Differential Revision: D20106753

Pulled By: cheng-chang

fbshipit-source-id: 44f505843837bba47a56e3fa2c4dd3bd76486b58
2020-03-06 14:05:12 -08:00
Huisheng Liu
904a60ff63 return timestamp from get (#6409)
Summary:
Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included.

ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
    base line (commit 72ee067b9):
        101.712 micros/op 314602 ops/sec;   36.0 MB/s (5658999 of 5658999 found)
    This PR:
        100.288 micros/op 319071 ops/sec;   36.5 MB/s (5674999 of 5674999 found)

./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409

Differential Revision: D20200086

Pulled By: riversand963

fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
2020-03-02 16:01:00 -08:00
Michael R. Crusoe
051696bf98 fix some spelling typos (#6464)
Summary:
Found from Debian's "Lintian" program
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6464

Differential Revision: D20162862

Pulled By: zhichao-cao

fbshipit-source-id: 06941ee2437b038b2b8045becbe9d2c6fbff3e12
2020-02-28 14:14:03 -08:00
Cheng Chang
741decfe37 Return early on failure when constructing CuckooTableReader (#6453)
Summary:
If file is not mmaped, CuckooTableReader should not try to read table properties from the file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6453

Test Plan: Added a new unit test

Differential Revision: D20103334

Pulled By: cheng-chang

fbshipit-source-id: 48539f14d93f6c1ebe12c3df5a14719e9d7b8726
2020-02-25 16:48:28 -08:00
Andrew Kryczka
69679e7375 Fix range deletion tombstone ingestion with global seqno (#6429)
Summary:
Original author: jeffrey-xiao

If we are writing a global seqno for an ingested file, the range
tombstone metablock gets accessed and put into the cache during
ingestion preparation. At the time, the global seqno of the ingested
file has not yet been determined, so the cached block will not have a
global seqno. When the file is ingested and we read its range tombstone
metablock, it will be returned from the cache with no global seqno. In
that case, we use the actual seqnos stored in the range tombstones,
which are all zero, so the tombstones cover nothing.

This commit removes global_seqno_ variable from Block. When iterating
over a block, the global seqno for the block is determined by the
iterator instead of storing this mutable attribute in Block.
Additionally, this commit adds a regression test to check that keys are
deleted when ingesting a file with a global seqno and range deletion
tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6429

Differential Revision: D19961563

Pulled By: ajkr

fbshipit-source-id: 5cf777397fa3e452401f0bf0364b0750492487b7
2020-02-25 15:31:48 -08:00
Yanqin Jin
890d87fadc Some minor fix-ups (#6440)
Summary:
Cleanup some code without any real change in functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6440

Differential Revision: D20015891

Pulled By: riversand963

fbshipit-source-id: 33e18754b0f002006a6d4805e9aaf84c0c8ad25a
2020-02-21 15:09:56 -08:00
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Cheng Chang
152f8a8ffe Remove unnecessary computation of index (#6406)
Summary:
`index` can be replaced by  `iter`, saving the computation of `index++`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6406

Test Plan: make check

Differential Revision: D19905056

Pulled By: cheng-chang

fbshipit-source-id: add4638959c0d2e4e77a11f3fa04ffabaf0de790
2020-02-14 08:26:23 -08:00
anand76
3e49249d30 Ensure all MultiGet IO errors are propagated to user (#6403)
Summary:
Unrevert the previous fix to propagate error status, and an additional fix to not treat a memtable lookup MergeInProgress status as an error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6403

Test Plan:
Unit tests
Tried running stress tests but couldn't repro the stress failure

Differential Revision: D19846721

Pulled By: anand1976

fbshipit-source-id: 7db10cccbdc863d9b559497f0a46b608d2488ca4
2020-02-11 17:27:22 -08:00
anand76
35ed530d2c Revert "Check KeyContext status in MultiGet (#6387)" (#6401)
Summary:
This reverts commit d70011bccc. The commit is causing some stress test failure due to unexpected Status::MergeInProgress() return for some keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6401

Differential Revision: D19826623

Pulled By: anand1976

fbshipit-source-id: edd634cede9cb7bdd2cb8f46e662ea709b16d2f1
2020-02-10 22:23:36 -08:00
Zhichao Cao
4369f2c7bb Checksum for each SST file and stores in MANIFEST (#6216)
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.

Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string).  A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216

Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.

Differential Revision: D19171461

Pulled By: zhichao-cao

fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
2020-02-10 15:52:52 -08:00
anand76
d70011bccc Check KeyContext status in MultiGet (#6387)
Summary:
Currently, any IO errors and checksum mismatches while reading data
blocks, are being ignored by the batched MultiGet. Its only looking at
the GetContext state. Fix that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6387

Test Plan: Add unit tests

Differential Revision: D19799819

Pulled By: anand1976

fbshipit-source-id: 46133dccbb04e64067b9fe6cda73e282203db969
2020-02-07 16:48:16 -08:00
sdong
8f2bee6747 Add ReadOptions.auto_prefix_mode (#6314)
Summary:
Add a new option ReadOptions.auto_prefix_mode. When set to true, iterator should return the same result as total order seek, but may choose to do prefix seek internally, based on iterator upper bounds. Also fix two previous bugs when handling prefix extrator changes: (1) reverse iterator should not rely on upper bound to determine prefix. Fix it with skipping prefix check. (2) block-based filter is not handled properly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6314

Test Plan: (1) add a unit test; (2) add the check to stress test and run see whether it can pass at least one run.

Differential Revision: D19458717

fbshipit-source-id: 51c1bcc5cdd826c2469af201979a39600e779bce
2020-01-28 14:44:05 -08:00
sdong
f10f135938 Fix regression bug of hash index with iterator total order seek (#6328)
Summary:
https://github.com/facebook/rocksdb/pull/6028 introduces a bug for hash index in SST files. If a table reader is created when total order seek is used, prefix_extractor might be passed into table reader as null. While later when prefix seek is used, the same table reader used, hash index is checked but prefix extractor is null and the program would crash.
Fix the issue by fixing http://github.com/facebook/rocksdb/pull/6028 in the way that prefix_extractor is preserved but ReadOptions.total_order_seek is checked

Also, a null pointer check is added so that a bug like this won't cause segfault in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6328

Test Plan: Add a unit test that would fail without the fix. Stress test that reproduces the crash would pass.

Differential Revision: D19586751

fbshipit-source-id: 8de77690167ddf5a77a01e167cf89430b1bfba42
2020-01-27 15:44:54 -08:00
Peter Dillinger
986df37135 Clean up PartitionedFilterBlockBuilder (#6299)
Summary:
Remove the redundant PartitionedFilterBlockBuilder::num_added_ and ::NumAdded since the parent class, FullFilterBlockBuilder, already provides them.
Also rename filters_in_partition_ and filters_per_partition_ to keys_added_to_partition_ and keys_per_partition_ to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6299

Test Plan: make check

Differential Revision: D19413278

Pulled By: pdillinger

fbshipit-source-id: 04926ee7874477d659cb2b6ae03f2d995fb747e5
2020-01-27 13:15:14 -08:00
Peter Dillinger
8aa99fc71e Warn on excessive keys for legacy Bloom filter with 32-bit hash (#6317)
Summary:
With many millions of keys, the old Bloom filter implementation
for the block-based table (format_version <= 4) would have excessive FP
rate due to the limitations of feeding the Bloom filter with a 32-bit hash.
This change computes an estimated inflated FP rate due to this effect
and warns in the log whenever an SST filter is constructed (almost
certainly a "full" not "partitioned" filter) that exceeds 1.5x FP rate
due to this effect. The detailed condition is only checked if 3 million
keys or more have been added to a filter, as this should be a lower
bound for common bits/key settings (< 20).

Recommended remedies include smaller SST file size, using
format_version >= 5 (for new Bloom filter), or using partitioned
filters.

This does not change behavior other than generating warnings for some
constructed filters using the old implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6317

Test Plan:
Example with warning, 15M keys @ 15 bits / key: (working_mem_size_mb is just to stop after building one filter if it's large)

    $ ./filter_bench -quick -impl=0 -working_mem_size_mb=1 -bits_per_key=15 -average_keys_per_filter=15000000 2>&1 | grep 'FP rate'
    [WARN] [/block_based/filter_policy.cc:292] Using legacy SST/BBT Bloom filter with excessive key count (15.0M @ 15bpk), causing estimated 1.8x higher filter FP rate. Consider using new Bloom with format_version>=5, smaller SST file size, or partitioned filters.
    Predicted FP rate %: 0.766702
    Average FP rate %: 0.66846

Example without warning (150K keys):

    $ ./filter_bench -quick -impl=0 -working_mem_size_mb=1 -bits_per_key=15 -average_keys_per_filter=150000 2>&1 | grep 'FP rate'
    Predicted FP rate %: 0.422857
    Average FP rate %: 0.379301
    $

With more samples at 15 bits/key:
  150K keys -> no warning; actual: 0.379% FP rate (baseline)
  1M keys -> no warning; actual: 0.396% FP rate, 1.045x
  9M keys -> no warning; actual: 0.563% FP rate, 1.485x
  10M keys -> warning (1.5x); actual: 0.564% FP rate, 1.488x
  15M keys -> warning (1.8x); actual: 0.668% FP rate, 1.76x
  25M keys -> warning (2.4x); actual: 0.880% FP rate, 2.32x

At 10 bits/key:
  150K keys -> no warning; actual: 1.17% FP rate (baseline)
  1M keys -> no warning; actual: 1.16% FP rate
  10M keys -> no warning; actual: 1.32% FP rate, 1.13x
  25M keys -> no warning; actual: 1.63% FP rate, 1.39x
  35M keys -> warning (1.6x); actual: 1.81% FP rate, 1.55x

At 5 bits/key:
  150K keys -> no warning; actual: 9.32% FP rate (baseline)
  25M keys -> no warning; actual: 9.62% FP rate, 1.03x
  200M keys -> no warning; actual: 12.2% FP rate, 1.31x
  250M keys -> warning (1.5x); actual: 12.8% FP rate, 1.37x
  300M keys -> warning (1.6x); actual: 13.4% FP rate, 1.43x

The reason for the modest inaccuracy at low bits/key is that the assumption of independence between a collision between 32-hash values feeding the filter and an FP in the filter is not quite true for implementations using "simple" logic to compute indices from the stock hash result. There's math on this in my dissertation, but I don't think it's worth the effort just for these extreme cases (> 100 million keys and low-ish bits/key).

Differential Revision: D19471715

Pulled By: pdillinger

fbshipit-source-id: f80c96893a09bf1152630ff0b964e5cdd7e35c68
2020-01-20 21:31:47 -08:00
Peter Dillinger
4b86fe1123 Log warning for high bits/key in legacy Bloom filter (#6312)
Summary:
Help users that would benefit most from new Bloom filter
implementation by logging a warning that recommends the using
format_version >= 5.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6312

Test Plan:
$ (for BPK in 10 13 14 19 20 50; do ./filter_bench -quick -impl=0 -bits_per_key=$BPK -m_queries=1 2>&1; done) | grep 'its/key'
    Bits/key actual: 10.0647
    Bits/key actual: 13.0593
    [WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (14) bits/key. Significant filter space and/or accuracy improvement is available with format_verion>=5.
    Bits/key actual: 14.0581
    [WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (19) bits/key. Significant filter space and/or accuracy improvement is available with format_verion>=5.
    Bits/key actual: 19.0542
    [WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (20) bits/key. Dramatic filter space and/or accuracy improvement is available with format_verion>=5.
    Bits/key actual: 20.0584
    [WARN] [/block_based/filter_policy.cc:546] Using legacy Bloom filter with high (50) bits/key. Dramatic filter space and/or accuracy improvement is available with format_verion>=5.
    Bits/key actual: 50.0577

Differential Revision: D19457191

Pulled By: pdillinger

fbshipit-source-id: 073d94cde5c70e03a160f953e1100c15ea83eda4
2020-01-17 19:37:35 -08:00
sdong
d87cffaea4 Fix another bug caused by recent hash index fix (#6305)
Summary:
Recent bug fix related to hash index introduced a new bug: hash index can return NotFound but it is not handled by BlockBasedTable::Get(). The end result is that Get() stops being executed too early. Fix it by ignoring NotFound code in Get().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6305

Test Plan: A problematic DB used to return NotFound incorrectly, and now able to return correct result. Will try to construct a unit test too.0

Differential Revision: D19438925

fbshipit-source-id: e751afa8c13728d56511cfeb1bc811ecb99f3217
2020-01-17 01:41:04 -08:00
sdong
f8b5ef85ec Fix a bug caused by recent fix of Prefix Hash (#6302)
Summary:
Recent fix to Prefix Hash https://github.com/facebook/rocksdb/pull/6292 caused a bug that the newly created NotFound status in hash index is never reset. This causes reseek or implict reseek to return wrong results sometimes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6302

Test Plan:
Add a unit test that would fail. Not fix.
crash test with hash test would fail in several seconds. With the fix, it will run about several minutes before failing with another failure.

Differential Revision: D19424572

fbshipit-source-id: c5276f36a95fd0e2837e30190476d2fe21ed8566
2020-01-16 10:47:20 -08:00
sdong
d2b4d42d4b Fix kHashSearch bug with SeekForPrev (#6297)
Summary:
When prefix is enabled the expected behavior when the prefix of the target does not exist is for Seek is to seek to any key larger than target and SeekToPrev to any key less than the target.
Currently. the prefix index (kHashSearch) returns OK status but sets Invalid() to indicate two cases: a prefix of the searched key does not exist, ii) the key is beyond the range of the keys in SST file. The SeekForPrev implementation in BlockBasedTable thus does not have enough information to know when it should set the index key to first (to return a key smaller than target). The patch fixes that by returning NotFound status for cases that the prefix does not exist. SeekForPrev in BlockBasedTable accordingly SeekToFirst instead of SeekToLast on the index iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6297

Test Plan: SeekForPrev of non-exsiting prefix is added to block_test.cc, and a test case is added in db_test2, which fails without the fix.

Differential Revision: D19404695

fbshipit-source-id: cafbbf95f8f60ff9ede9ccc99d25bfa1cf6fcdc3
2020-01-15 14:28:39 -08:00
Maysam Yabandeh
d4b7fbf0d5 kHashSearch incompatible with index_block_restart_interval>1 (#6294)
Summary:
kHashSearch index type is incompatible with index_block_restart_interval larger than 1. The patch asserts that and also resets index_block_restart_interval value if it is incompatible with kHashSearch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6294

Differential Revision: D19394229

Pulled By: maysamyabandeh

fbshipit-source-id: 8a12712ab25e81094a7f71ecd43f773dd4fb6acd
2020-01-14 11:21:27 -08:00
Yanqin Jin
946c43a026 Improve error msg for SstFileWriter Merge (#6261)
Summary:
Reword the error message when keys are not added in strict ascending order.
Specifically, original error message is not clear when application tries to
call SstFileWriter::Merge() with duplicate keys.

Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6261

Differential Revision: D19290398

Pulled By: riversand963

fbshipit-source-id: 4dc30a701414e6894db2eb024e3734470c22b371
2020-01-06 10:57:22 -08:00
sdong
f295b099f6 BlockBasedTable::ApproximateSize() should use total order seek (#6222)
Summary:
Right now BlockBasedTable::ApproximateSize() uses default setting about whether to use total order seek. There is no reason for that. There is no reason to do any filtering for approximate size boundary key, and it may introduce bugs. Disable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6222

Test Plan: Run existing tests

Differential Revision: D19184787

fbshipit-source-id: 64180660bd2800914fff75104172b61c06f0b1c9
2019-12-19 14:56:38 -08:00
Maysam Yabandeh
77d5ba7887 Revert "Add kHashSearch to stress tests (#6210)" (#6220)
Summary:
This reverts commit 54f9092b0c.
It making our daily stress tests fail. Revert it until the issues are fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6220

Differential Revision: D19179881

Pulled By: maysamyabandeh

fbshipit-source-id: 99de0eaf776567fa81110b9ad2608234a16083ce
2019-12-19 10:46:55 -08:00
Maysam Yabandeh
54f9092b0c Add kHashSearch to stress tests (#6210)
Summary:
Beside extending index_type to kHashSearch, it clarifies in the code base that this feature is incompatible with index_block_restart_interval > 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6210

Test Plan:
```
make -j32 crash_test

Differential Revision: D19166567

Pulled By: maysamyabandeh

fbshipit-source-id: 3aaf75a70a8b462d372d43aac69dbd10df303ec7
2019-12-18 18:09:30 -08:00
sdong
02193ce406 Prevent file prefetch when mmap is enabled. (#6206)
Summary:
Right now, sometimes file prefetching is still on when mmap is enabled. This causes bug of reading wrong data. In this commit, we remove all those possible paths.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6206

Test Plan: make crash_test with compaction_readahead_size, which used to fail. RUn all existing tests.

Differential Revision: D19149429

fbshipit-source-id: 9e18ea8c566e416aac9647bdd05afe596634791b
2019-12-18 11:01:29 -08:00
Zhichao Cao
c399704c7a Fix: remove the potential dead store variable in block_based_table_reader.cc (#6204)
Summary:
buf_offset does not need to get the value from req.len for othe final block. It can cause test fail for clan_analyze. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6204

Test Plan: pass make asan_check

Differential Revision: D19145335

Pulled By: zhichao-cao

fbshipit-source-id: 8f6e74565746381b5c5ef598b97d746517b36e5b
2019-12-18 01:23:07 -08:00
Zhichao Cao
cddd637997 Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.

Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.

Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089

Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check

Differential Revision: D18734668

Pulled By: zhichao-cao

fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
2019-12-16 16:26:03 -08:00
Peter Dillinger
a92bd0a183 Optimize memory and CPU for building new Bloom filter (#6175)
Summary:
The filter bits builder collects all the hashes to add in memory before adding them (because the number of keys is not known until we've walked over all the keys). Existing code uses a std::vector for this, which can mean up to 2x than necessary space allocated (and not freed) and up to ~2x write amplification in memory. Using std::deque uses close to minimal space (for large filters, the only time it matters), no write amplification, frees memory while building, and no need for large contiguous memory area. The only cost is more calls to allocator, which does not appear to matter, at least in benchmark test.

For now, this change only applies to the new (format_version=5) Bloom filter implementation, to ease before-and-after comparison downstream.

Temporary memory use during build is about the only way the new Bloom filter could regress vs. the old (because of upgrade to 64-bit hash) and that should only matter for full filters. This change should largely mitigate that potential regression.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6175

Test Plan:
Using filter_bench with -new_builder option and 6M keys per filter is like large full filter (improvement). 10k keys and no -new_builder is like partitioned filters (about the same). (Corresponding configurations run simultaneously on devserver.)

std::vector impl (before)

    $ /usr/bin/time -v ./filter_bench -impl=2 -quick -new_builder -working_mem_size_mb=1000 -
    average_keys_per_filter=6000000
    Build avg ns/key: 52.2027
    Maximum resident set size (kbytes): 1105016
    $ /usr/bin/time -v ./filter_bench -impl=2 -quick -working_mem_size_mb=1000 -
    average_keys_per_filter=10000
    Build avg ns/key: 30.5694
    Maximum resident set size (kbytes): 1208152

std::deque impl (after)

    $ /usr/bin/time -v ./filter_bench -impl=2 -quick -new_builder -working_mem_size_mb=1000 -
    average_keys_per_filter=6000000
    Build avg ns/key: 39.0697
    Maximum resident set size (kbytes): 1087196
    $ /usr/bin/time -v ./filter_bench -impl=2 -quick -working_mem_size_mb=1000 -
    average_keys_per_filter=10000
    Build avg ns/key: 30.9348
    Maximum resident set size (kbytes): 1207980

Differential Revision: D19053431

Pulled By: pdillinger

fbshipit-source-id: 2888e748723a19d9ea40403934f13cbb8483430c
2019-12-15 21:31:08 -08:00
anand76
afa2420c2b Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.

This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.

The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.

This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.

The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761

Differential Revision: D18868376

Pulled By: anand1976

fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 14:48:41 -08:00
sdong
a68dff5c35 Apply formatter to some recent commits (#6138)
Summary:
Formatter somehow complains some recent lines changed. Apply them to make the formatter happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6138

Test Plan: See CI passes.

Differential Revision: D18895950

fbshipit-source-id: 7d1696cf3e3a682bc10a30cdca748a23c6565255
2019-12-09 15:49:49 -08:00
Peter Dillinger
e43d2c4424 Fix & test rocksdb_filterpolicy_create_bloom_full (#6132)
Summary:
Add overrides needed in FilterPolicy wrapper to fix
rocksdb_filterpolicy_create_bloom_full (see issue https://github.com/facebook/rocksdb/issues/6129). Re-enabled
assertion in BloomFilterPolicy::CreateFilter that was being violated.
Expanded c_test to identify Bloom filter implementations by FP counts.
(Without the fix, updated test will trigger assertion and fail otherwise
without the assertion.)

Fixes https://github.com/facebook/rocksdb/issues/6129
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6132

Test Plan: updated c_test, also run under valgrind.

Differential Revision: D18864911

Pulled By: pdillinger

fbshipit-source-id: 08e81d7b5368b08e501cd402ef5583f2650c19fa
2019-12-09 12:21:14 -08:00
Ziyue Yang
7e2f831924 Fix wrong ExtractUserKey usage in BlockBasedTableBuilder::EnterUnbuff… (#6100)
Summary:
BlockBasedTableBuilder uses ExtractUserKey in EnterUnbuffered. This would
cause index filter building error, since user-provided timestamp is supported
by ExtractUserKeyAndStripTimestamp, and it's used in Add. This commit changes
ExtractUserKey to ExtractUserKeyAndStripTimestamp.

A test case is also added by modifying DBBasicTestWithTimestampWithParam_
PutAndGet test in db_basic_test to cover ExtractUserKeyAndStripTimestamp usage
in both kBuffered and kUnbuffered state of BlockBasedTableBuilder.

Before the ExtractUserKeyAndStripTimstamp fix:

```
$ ./db_basic_test --gtest_filter="*PutAndGet*"
Note: Google Test filter = *PutAndGet*
[==========] Running 2 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 2 tests from Timestamp/DBBasicTestWithTimestampWithParam
[ RUN      ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
db/db_basic_test.cc:2109: Failure
db_->Get(ropts, cfh, "key" + std::to_string(j), &value)
NotFound:
[  FAILED  ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0, where GetParam() = false (1177 ms)
[ RUN      ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/1
[       OK ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/1 (1056 ms)
[----------] 2 tests from Timestamp/DBBasicTestWithTimestampWithParam (2233 ms total)

[----------] Global test environment tear-down
[==========] 2 tests from 1 test case ran. (2233 ms total)
[  PASSED  ] 1 test.
[  FAILED  ] 1 test, listed below:
[  FAILED  ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0, where GetParam() = false

 1 FAILED TEST
```

After the ExtractUserKeyAndStripTimstamp fix:

```
$ ./db_basic_test --gtest_filter="*PutAndGet*"
Note: Google Test filter = *PutAndGet*
[==========] Running 2 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 2 tests from Timestamp/DBBasicTestWithTimestampWithParam
[ RUN      ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0
[       OK ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/0 (1417 ms)
[ RUN      ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/1
[       OK ] Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/1 (1041 ms)
[----------] 2 tests from Timestamp/DBBasicTestWithTimestampWithParam (2458 ms total)

[----------] Global test environment tear-down
[==========] 2 tests from 1 test case ran. (2458 ms total)
[  PASSED  ] 2 tests.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6100

Differential Revision: D18769654

Pulled By: riversand963

fbshipit-source-id: 76c2cf2c9a5e0d85db95d98e812e6af0c2a15c6b
2019-12-09 10:57:02 -08:00
Peter Dillinger
6db57bc37f Disable new Bloom filter assertion (#6128)
Summary:
A longstanding bug in our C interface can trigger this
assertion; see issue https://github.com/facebook/rocksdb/issues/6129. Disabling the assertion for now
(for 6.6.0) and will re-enable on fix of that bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6128

Differential Revision: D18854899

Pulled By: pdillinger

fbshipit-source-id: 9eb5294b9f11b208dc1a8cc148aaa31e47ff892b
2019-12-06 10:28:02 -08:00
Peter Dillinger
ca3b6c28c9 Expose and elaborate FilterBuildingContext (#6088)
Summary:
This change enables custom implementations of FilterPolicy to
wrap a variety of NewBloomFilterPolicy and select among them based on
contextual information such as table level and compaction style.

* Moves FilterBuildingContext to public API and elaborates it with more
useful data. (It would be nice to put more general options-like data,
but at the time this object is constructed, we are using internal APIs
ImmutableCFOptions and MutableCFOptions and don't have easy access to
ColumnFamilyOptions that I can tell.)

* Renames BloomFilterPolicy::GetFilterBitsBuilderInternal to
GetBuilderWithContext, because it's now public.

* Plumbs through the table's "level_at_creation" for filter building
context.

* Simplified some tests by adding GetBuilder() to
MockBlockBasedTableTester.

* Adds test as DBBloomFilterTest.ContextCustomFilterPolicy, including
sample wrapper class LevelAndStyleCustomFilterPolicy.

* Fixes a cross-test bug in DBBloomFilterTest.OptimizeFiltersForHits
where it does not reset perf context.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6088

Test Plan: make check, valgrind on db_bloom_filter_test

Differential Revision: D18697817

Pulled By: pdillinger

fbshipit-source-id: 5f987a2d7b07cc7a33670bc08ca6b4ca698c1cf4
2019-11-26 18:24:10 -08:00
Peter Dillinger
57f3032285 Allow fractional bits/key in BloomFilterPolicy (#6092)
Summary:
There's no technological impediment to allowing the Bloom
filter bits/key to be non-integer (fractional/decimal) values, and it
provides finer control over the memory vs. accuracy trade-off. This is
especially handy in using the format_version=5 Bloom filter in place
of the old one, because bits_per_key=9.55 provides the same accuracy as
the old bits_per_key=10.

This change not only requires refining the logic for choosing the best
num_probes for a given bits/key setting, it revealed a flaw in that logic.
As bits/key gets higher, the best num_probes for a cache-local Bloom
filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a
standard Bloom filter. For example, at 16 bits per key, the best
num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%).
This change fixes and refines that logic (for the format_version=5
Bloom filter only, just in case) based on empirical tests to find
accuracy inflection points between each num_probes.

Although bits_per_key is now specified as a double, the new Bloom
filter converts/rounds this to "millibits / key" for predictable/precise
internal computations. Just in case of unforeseen compatibility
issues, we round to the nearest whole number bits / key for the
legacy Bloom filter, so as not to unlock new behaviors for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092

Test Plan: unit tests included

Differential Revision: D18711313

Pulled By: pdillinger

fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-26 15:59:34 -08:00
Peter Dillinger
ac498cdb86 Remove a few unnecessary includes
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6046

Test Plan: make check, manual inspection

Differential Revision: D18573044

Pulled By: pdillinger

fbshipit-source-id: 7a5999fc08d798ce3157b56d4b36d24027409fc3
2019-11-19 08:20:42 -08:00
Peter Dillinger
f059c7d9b9 New Bloom filter implementation for full and partitioned filters (#6007)
Summary:
Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter.

Speed

The improved speed, at least on recent x86_64, comes from
* Using fastrange instead of modulo (%)
* Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row.
* Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc.
* Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes.

Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed):

$ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter
Build avg ns/key: 47.7135
Mixed inside/outside queries...
  Single filter net ns/op: 26.2825
  Random filter net ns/op: 150.459
    Average FP rate %: 0.954651
$ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter
Build avg ns/key: 47.2245
Mixed inside/outside queries...
  Single filter net ns/op: 63.2978
  Random filter net ns/op: 188.038
    Average FP rate %: 1.13823

Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected.

The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome.

Accuracy

The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices
within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments.

Accuracy data (generalizes, except old impl gets worse with millions of keys):
Memory bits per key: FP rate percent old impl -> FP rate percent new impl
6: 5.70953 -> 5.69888
8: 2.45766 -> 2.29709
10: 1.13977 -> 0.959254
12: 0.662498 -> 0.411593
16: 0.353023 -> 0.0873754
24: 0.261552 -> 0.0060971
50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP)

Fixes https://github.com/facebook/rocksdb/issues/5857
Fixes https://github.com/facebook/rocksdb/issues/4120

Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized.

Compatibility

Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007

Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version).

Differential Revision: D18294749

Pulled By: pdillinger

fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-13 16:44:01 -08:00
Peter Dillinger
42b5494ec8 Fix BloomFilterPolicy changes for unsigned char (ARM) (#6024)
Summary:
Bug in PR https://github.com/facebook/rocksdb/issues/5941 when char is unsigned that should only affect
assertion on unused/invalid filter metadata.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6024

Test Plan: on ARM: ./bloom_test && ./db_bloom_filter_test && ./block_based_filter_block_test && ./full_filter_block_test && ./partitioned_filter_block_test

Differential Revision: D18461206

Pulled By: pdillinger

fbshipit-source-id: 68a7c813a0b5791c05265edc03cdf52c78880e9a
2019-11-12 15:29:15 -08:00
anand76
6c7b1a0cc7 Batched MultiGet API for multiple column families (#5816)
Summary:
Add a new API that allows a user to call MultiGet specifying multiple keys belonging to different column families. This is mainly useful for users who want to do a consistent read of keys across column families, with the added performance benefits of batching and returning values using PinnableSlice.

As part of this change, the code in the original multi-column family MultiGet for acquiring the super versions has been refactored into a separate function that can be used by both, the batching and the non-batching versions of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5816

Test Plan:
make check
make asan_check
asan_crash_test

Differential Revision: D18408676

Pulled By: anand1976

fbshipit-source-id: 933e7bec91dd70e7b633be4ff623a1116cc28c8d
2019-11-12 13:52:55 -08:00
anand76
03ce7fb292 Fix a buffer overrun problem in BlockBasedTable::MultiGet (#6014)
Summary:
The calculation in BlockBasedTable::MultiGet for the required buffer length for reading in compressed blocks is incorrect. It needs to take the 5-byte block trailer into account.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6014

Test Plan: Add a unit test DBBasicTest.MultiGetBufferOverrun that fails in asan_check before the fix, and passes after.

Differential Revision: D18412753

Pulled By: anand1976

fbshipit-source-id: 754dfb66be1d5f161a7efdf87be872198c7e3b72
2019-11-11 16:59:15 -08:00
anand76
9836a1fa33 Fix MultiGet crash when no_block_cache is set (#5991)
Summary:
This PR fixes https://github.com/facebook/rocksdb/issues/5975. In ```BlockBasedTable::RetrieveMultipleBlocks()```, we were calling ```MaybeReadBlocksAndLoadToCache()```, which is a no-op if neither uncompressed nor compressed block cache are configured.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5991

Test Plan:
1. Add unit tests that fail with the old code and pass with the new
2. make check and asan_check

Cc spetrunia

Differential Revision: D18272744

Pulled By: anand1976

fbshipit-source-id: e62fa6090d1a6adf84fcd51dfd6859b03c6aebfe
2019-11-07 12:02:21 -08:00
Yanqin Jin
67e735dbf9 Rename BlockBasedTable::ReadMetaBlock (#6009)
Summary:
According to
https://github.com/facebook/rocksdb/wiki/Rocksdb-BlockBasedTable-Format,
the block read by BlockBasedTable::ReadMetaBlock is actually the meta index
block. Therefore, it is better to rename the function to ReadMetaIndexBlock.

This PR also applies some format change to existing code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6009

Test Plan: make check

Differential Revision: D18333238

Pulled By: riversand963

fbshipit-source-id: 2c4340a29b3edba53d19c132cbfd04caf6242aed
2019-11-05 17:19:11 -08:00
Peter Dillinger
18f57f5ef8 Add new persistent 64-bit hash (#5984)
Summary:
For upcoming new SST filter implementations, we will use a new
64-bit hash function (XXH3 preview, slightly modified). This change
updates hash.{h,cc} for that change, adds unit tests, and out-of-lines
the implementations to keep hash.h as clean/small as possible.

In developing the unit tests, I discovered that the XXH3 preview always
returns zero for the empty string. Zero is problematic for some
algorithms (including an upcoming SST filter implementation) if it
occurs more often than at the "natural" rate, so it should not be
returned from trivial values using trivial seeds. I modified our fork
of XXH3 to return a modest hash of the seed for the empty string.

With hash function details out-of-lines in hash.h, it makes sense to
enable XXH_INLINE_ALL, so that direct calls to XXH64/XXH32/XXH3p
are inlined. To fix array-bounds warnings on some inline calls, I
injected some casts to uintptr_t in xxhash.cc. (Issue reported to Yann.)
Revised: Reverted using XXH_INLINE_ALL for now.  Some Facebook
checks are unhappy about #include on xxhash.cc file. I would
fix that by rename to xxhash_cc.h, but to best preserve history I want
to do that in a separate commit (PR) from the uintptr casts.

Also updated filter_bench for this change, improving the performance
predictability of dry run hashing and adding support for 64-bit hash
(for upcoming new SST filter implementations, minor dead code in the
tool for now).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5984

Differential Revision: D18246567

Pulled By: pdillinger

fbshipit-source-id: 6162fbf6381d63c8cc611dd7ec70e1ddc883fbb8
2019-10-31 16:36:35 -07:00
Peter Dillinger
685e895652 Prepare filter tests for more implementations (#5967)
Summary:
This change sets up for alternate implementations underlying
BloomFilterPolicy:

* Refactor BloomFilterPolicy and expose in internal .h file so that it's easy to iterate over / select implementations for testing, regardless of what the best public interface will look like. Most notably updated db_bloom_filter_test to use this.
* Hide FullFilterBitsBuilder from unit tests (alternate derived classes planned); expose the part important for testing (CalculateSpace), as abstract class BuiltinFilterBitsBuilder. (Also cleaned up internally exposed interface to CalculateSpace.)
* Rename BloomTest -> BlockBasedBloomTest for clarity (despite ongoing confusion between block-based table and block-based filter)
* Assert that block-based filter construction interface is only used on BloomFilterPolicy appropriately constructed. (A couple of tests updated to add ", true".)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5967

Test Plan: make check

Differential Revision: D18138704

Pulled By: pdillinger

fbshipit-source-id: 55ef9273423b0696309e251f50b8c1b5e9ec7597
2019-10-31 14:12:33 -07:00