isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A device can only be attached to a single master device. So instead of
looping and searching for the master device, we can just use dev->u.master
directly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device is disabled ("off"), it must not send events to a client.
The driver shouldn't send events in that case anyway, but just to make sure
we simply drop events coming while the device is disabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A device can only be attached to a single master device. So instead of
looping and searching for the master device, we can just use dev->u.master
directly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a proper access mode, and reverse the logic of the return value.
Zero ("Success") is returned on success from the hook calls.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
Rather than have one field per hierarchy change, XI2 has two fields - one
generic one and one per-device that include the device-specific flags.
This requires some funky handling for removed devices, but oh well.
Xephyr doesn't manually set Activate/DeactivateGrab for new devices,
resulting in a NULL-pointer dereference later when a grab is activated.
Avoid the segfault by ensuring that the pointer is always valid.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xephyr doesn't manually set Activate/DeactivateGrab for new devices,
resulting in a NULL-pointer dereference later when a grab is activated.
Avoid the segfault by ensuring that the pointer is always valid.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Error: Write outside array bounds at Xext/geext.c:406
in function 'GEWindowSetMask' [Symbolic analysis]
In array dereference of cli->nextSib[extension] with index 'extension'
Array size is 128 elements (of 4 bytes each), index <= 128
Error: Buffer overflow at dix/events.c:592
in function 'SetMaskForEvent' [Symbolic analysis]
In array dereference of filters[deviceid] with index 'deviceid'
Array size is 20 elements (of 512 bytes each), index >= 0 and index <= 20
Error: Read buffer overflow at hw/xfree86/loader/loader.c:226
in function 'LoaderOpen' [Symbolic analysis]
In array dereference of refCount[new_handle] with index 'new_handle'
Array size is 256 elements (of 4 bytes each), index >= 1 and index <= 256
These bugs were found using the Parfait source code analysis tool.
For more information see http://research.sun.com/projects/parfait
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
newer gcc's warn against how this cast is done (though it eludes me why),
and lrintf() is also faster especially on insane processors like the P4
(http://www.mega-nerd.com/FPcast).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a shorthand for disabling acceleration, while retaining the
possiblity to use constant deceleration. If constant deceleration is
also unused, it will optimize motion processing.
Other possiblities to deactivate acceleration were quite hidden,
and didn't always work as expected. E.g. xset m 1 1 would retain
adaptive deceleration, while xset m 1 0 would not (in the default
profile).
Also removes the 'reserved' profile; it was unused and it's trivial
to add new ones anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
newer gcc's warn against how this cast is done (though it eludes me why),
and lrintf() is also faster especially on insane processors like the P4
(http://www.mega-nerd.com/FPcast).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A XTest virtual slave device pair (kbd/ptr) exists for every master
device pair. This is so XTest events are correctly propogated via slave
devices up to Master devices and the classes are correctly changed along
the way. We add the XTest slave device pair to the Virtual Core pointer
and provide a simple way of creating the devices.
A XTest Slave Device is identified by the XTstDevicePrivateKey property
being set in the devices devProperties
XI events are still propagated through the matching device, in the hope the
client knows what it is doing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allocating a slave device is essentially the same as allocating a master device.
Hence we rename AllocMaster to AllocDevicePair and provided the ability to
indicate if a master or slave device pair is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some keyboards (?) advertise more than MAX_VALUATORS axes. Parts of the
internal event delivery relies on not having more than MAX_VALUATOR axes, so
let's cap it down.
If there's real devices that require more than the current 36, I'm sure we can
bump this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some keyboards (?) advertise more than MAX_VALUATORS axes. Parts of the
internal event delivery relies on not having more than MAX_VALUATOR axes, so
let's cap it down.
If there's real devices that require more than the current 36, I'm sure we can
bump this up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This didn't really work as intended, but did amazingly well thanks
to roundf() hiding the defect. Cheers!
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Virtually all callers use
XkbGetRulesDefault(&rmlvo);
InitKeyboardDeviceStruct(..., rmlvo);
Let's save them the trouble and accept NULL as a hint to take the
default RMLVO.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This didn't really work as intended, but did amazingly well thanks
to roundf() hiding the defect. Cheers!
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On a typical LCD, a black screensaver is actually worse for power
consumption than a normal screen, because it takes more energy to turn
the crystals opaque. Also, the intermediate DPMS states are essentially
useless and most monitors alias them to the 'off' state, so we may as
well do the same.
As a pleasant side effect, this brings the default DPMS timeouts in line
with the EnergyStar Program Requirements for Computers:
http://www.energystar.gov/index.cfm?c=revisions.computer_spec
which state that products must be "shipped with the display's Sleep mode
set to activate within 15 minutes of user inactivity".
These two defines were defined in C files but not used anywhere:
dix/window.c #define DeviceEventMasks (KeyPressMask | [...]
os/connection.c #define MAXFD 500
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yes, this means we have even more arguments to GrabDevice. But it beats having
a copy of most but not all of GrabDevice in ProcGrabPointer.
Also, reshuffle the order of parameters, the CARD* status is a return value
and should be last.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split ChangeMasterDeviceClasses into an extra XISendDeviceChangedEvent that
assembles the XI2 wire event for the DeviceChanged event. Re-use this when
detaching the last SD.
Not quite perfect yet, we still copy the device classes from the slave now
rather than from the data we had when the event occured. But it's a start.
(We can now unexport SizeDeviceInfo and CopySwapDevices, not needed anymore)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
0 is now reserved for the "AllDevices" virtual device.
1 is now reserved for the "AllMasterDevices" virtual device.
This also means that wherever we passed in (mskidx = 0), we now need to pass
in the deviceid.
Don't let everyone acces the filters[] array directly. This is necessary once
we start dealing with GenericEvents, where the filters are a bit more
complicated.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The masks were originally designed to generically handle event masks for
extensions. Since all that is in-server anyway, it's much better writing
custom event masks for those extensions that need it and not providing a
unified mechanism.
XI2 needs more than the current implementation, which is already too complex
for most other extensions. good riddance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Best to FatalError if a wrong event comes in. At least that forces me to fix
it really quickly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This did access the wrong device's sync state, potentially freezing or not
thawing the actual device that was supposed to be thawed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is just for correctness. The server should return BadValue for anything
not in [-100, 100].
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Replace multi-stage filtering with simple linear velocity,
tracked several instances backwards. A heuristic ensures
only approximately linear motion is considered, so velocity
remains valid in any case. Numerical stability is much
better, and nothing changes to people who didn't tune the
advanced features of the previous algorithm.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
dixLookupResource attempted to automatically detect whether the caller
wanted a lookup by-type or by-class, unfortunately, it guessed wrong for
RT_NONE. Instead of trying to make the guess better, this patch just reverts
the unification and creates separate functions for each operation.
Only ever change the button map on the device we actually care about, not the
attached SDs, not the current MD of the device.
X.Org Bug 20122 <http://bugs.freedesktop.org/show_bug.cgi?id=20122>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Don't pass xEvent* and count through to processing, pass a single
InternalEvent.
Custom handlers are disabled for the time being. And for extra fun,
XKB's pointer motion emulation is disabled. But stick an error in there so
that we get reminded should we forget about it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
deviceGrab.sync.event is now an internal event, and CheckDeviceGrabs and
friends is changed over.
Note that this currently breaks some frozen grabs. See towards the end of
ComputeFreezes().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that we're only partially switched to internal events. The event in the
devices' event queue (dev->deviceGrab.sync.event) is still an XI event. The
events in syncEvents are InternalEvents only now.
This also implies fixing CheckVirtualMotion to work with internal events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Get rid of the deviceValuator processing and a few other things, but still
drop back into XI before checking device grabs or doing anything else.
NoticeEventTime now needs to take InternalEvents, and while we're at it,
change NoticeTime from a macro to a function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Before dropping down into the DIX, convert back into XI events. This is a
temporary solution only, until the DIX is capable of handling InternalEvents
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This gets rid of the nevents parameter, InternalEvents are always a single
item per event. Also remove the special DeviceValuator handling in both
enqueueing and dequeueing.
Custom callback handlers are now broken until fixed.
For bisectability, we copy the InternalEvent back into the XI required during
POE and friends. Consider this a temporary solution.
Note: Because of misc linker bonghits, Xvfb won't link in this revision.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GPE, GKVE, GProxE generate InternalEvents now.
DeviceClassesChangedEvents generates an InternalEvent now, but incomplete! We
need to tack on the information about the new SD in the ClassesChanged events.
Note: To make the progress bisectable, we drop back into XI events at the end of the
Get*Events functions. So the rest of the server still uses XI events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Until the InternalEvents are used throughout the server, we can use this one
to drop us back into XI la-la land where every event is the wire format.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Convert from an InternalEvent type to the matching core/XI type. Currently
only for a few events, those we actually need in the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather, modify the two callers to call separately for the two different.
events. Unexport SetMaskForEvent too.
And while we're at it, get rid of the MotionFilter macro, because it's one
half confusing and one half pointless.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Close <Benjamin.Close@clearchain.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
The algorithm is split in a 2D-specific and a general part.
This potentially allows to accelerate more than just screen motion.
A state machine is intoduced to make code more explicit and readable.
It also improves handling of 'phase 1' mickeys when axial correction
kicks in (corner case).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yes, this is an ugly piece mess of #ifdefs, but it beats having two nearly
identical functions.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we have a busted xkb setup, the XKB initialization on the core devices
fails and leaves us with dev->key->xkbInfo == NULL. This in turn causes
segfaults lateron.
Return BadValue when the XKB configuration for a master device failed, and if
that happens for the VCP/VCK, die semi-gracefully.
The VCP init can only fail on OOM.
Reported by Aaron Plattner.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
devices.c: In function ‘DoChangeKeyboardControl’:
devices.c:1768: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Changes MakeAtom to take a const char * and NameForAtom to return them,
since many callers pass pointers to constant strings stored in read-only
ELF sections. Updates in-tree callers as necessary to clear const
mismatch warnings introduced by this change.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
This mirrors that in KeyClassRec: the state of the buttons as posted to
GetPointerEvents, rather than the state of the buttons as processed by
ProcessOtherEvent and friends.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Everything goes through XKB's Process{Keyboard,Pointer}Event on its way
through to ProcessOtherEvent now, so get rid of the old, useless functions.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of always keeping two copies of the keymap, only generate the
core keymap from the XKB keymap when we really need to, and use the XKB
keymap as the canonical keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Replace both core and Xi functions with one function that validates the
proposed map, and sends out both kinds of notification.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keyboard map notifications are always generated from within XKB code,
which also takes care of copying the keysyms, etc. If you need to
mangle the keymap yourself, generate a new core keymap/modmap, and pass
it to XkbApplyMappingChange.
SendMappingNotify is renamed to SendPointerMappingNotify (and ditto its
Device variants), which still only _sends_ the notifications, as opposed
to also doing the copying a la XkbApplyMappingChange.
Also have the modmap change code traverse the device hierachy, rather
than just going off the core keyboard.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since modifierKeyMap is generated from modifierMap, just remove it, and
only generate it when we need to send the modifier map to the client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Modifiers get cleared by the XKB code when we drop down into core input
processing, so just delete the dead code path to simplify things a bit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XkbInitKeyboardDeviceStruct is now the only valid keyboard
initialisation: all the details are hidden behind here. This now makes
it impossible to supply a core keymap at startup.
If dev->key is valid, dev->key->xkbInfo->desc is also valid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: properties don't need to be cleaned up, the DIX does it for us anyway.
Data that is stored in properties is cleaned up by the property system.
Handlers, etc. don't need to be unregistered while cleaning up, as they get
deleted when the device is removed anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
If the MD's lastSlave was a devices with custom axes ranges, then a
WarpPointer would position the cursor at the wrong location. A WarpPointer
request provides screen coordinates and these coordinates were scaled to the
device range before warping.
This patch consists of two parts:
1) in the WarpPointer handling, get the lastSlave and post the event through
this device.
2) assume that WarpPointer coordinates are always in screen coordinates and
scale them to device coordinates in GPE before continuing. Note that this
breaks device-coordinate based XWarpDevicePointer calls (for which the spec
isn't nailed down yet anyway) until a better solution is found.
X.Org Bug 19297 <http://bugs.freedesktop.org/show_bug.cgi?id=19297>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
positionSprite needs to scale to screen coordinates and in the process of
doing so alters dev->last.valuators[0:1]. Drop the real coordinates back after
finishing and before updating the motion history. This way, we don't push the
screen coordinates into the motion history.
X.Org Bug 19285 <http://bugs.freedesktop.org/show_bug.cgi?id=19285>
This commit moves the focus handling from events.c into enterleave.c and
implements a model similar to the core enter/leave model.
For a full description of the model, see:
http://lists.freedesktop.org/archives/xorg/2008-December/041740.html
This commit also gets rid of the focusinout array in the WindowRec, ditching
it in favour of a local array that keeps the current focus window for each
device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of keeping a flag on each window for the devices that are in this
window, keep a local array that holds the current pointer window for each
device. Benefit: searching for the first descendant of a pointer is a simple
run through the array.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The old model was implemented based on a misunderstanding of NotifyVirtual and
NotifyNonlinearVirtual events. It became complicated and was broken in some
places [1]. This patch wipes this model completely.
A much simplified implementation is provided instead. Rather than a top-down
approach ("we have a tree of windows, which ones need to get which event")
this one uses a step-by-step approach. For each window W between A and B
determine the pointer window P as perceived by this window and determine the
event type based on this information. This is in-line with the model described
by Owen Taylor [2].
[1] http://lists.freedesktop.org/archives/xorg/2008-December/041559.html
[2] http://lists.freedesktop.org/archives/xorg/2008-August/037606.html
Currently, if a device map differs from the core pointer map, then the
request may return MappingBusy, even though all the affected core
buttons are in the up state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The builtin-fonts configure option was removed, as it at best should
have been a runtime option. Instead, now it always register all "font
path element" backends, and adds built-ins fonts at the end of the
default font path.
This should be a more reasonable solution, to "correct" the most
common Xorg FAQ (could not open default font 'fixed'), and also don't
break by default applications that use only the standard/historical
X Font rendering.
Devices are only activated once - right after they've been added to the
server. If a device failes activation, it's dead. There's no reason to
continue. Return the error code from ActivateDevice() without setting up
sprite information or even sending a event to the client.
Then - in the DDX - just remove the device again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device hasn't been initialized, it doesn't have a cursor yet. So don't
set the cursor to the NullCursor, and don't try to DisableDevice either.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This still doesn't fix reset the MD's classes (a TODO that's been here for
ages), but at least we don't segfault anymore when detaching the last SD.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fallout from aeff14d5f2. Yes, we don't malloc
anymore because we are inside a SIGIO and the memory is already there anyway.
But we still need to set the event length correctly, otherwise
mieqEnqueue/mieqProcessInputEvent don't know how much memory to copy.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We mustn't realloc as we are inside a signal handler. With
SetMinimumEventSize, this code should never be hit anyway, as the event list
should have the required memory before this code is hit.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Follow-up to 4971315296. countValuatorEvents was copied from GKVE where it
was obviously broken but nobody noticed. GPE had the correct version, but that
one got lost during de-duplication. Restoring the correct calculation - if we
have 6 valuators, we want 1 valuator event, not 2.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The device's button down state array was changed to use DOWN_LENGTH and thus
bitflags for each button in cfcb3da7.
Update the DBSN events to copy this bit-wise state.
Update xkb and Xi to check for the bit flag instead of the array value.
Reported by ajax.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
libXfont has stubs for these symbols, so, when compiling with hidden
symbols by default, these symbols must be visible in the X Server, or
the stubs in libXfont will be used.
I merged the wrong patch. See correct patch at:
http://lists.freedesktop.org/archives/xorg/2008-November/040540.html
Not activating the device before attempting to enable it would leave the
sprite unset, crashing the server when enabling the real devices.
This reverts commit e078901a4e.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This prevents a protocol visible side-effect (XVisibilityEvent) on
XCompositeRedirectWindow() followed by a XCompositeUnredirectWindow().
The problem shows up in gnome-screensaver with compiz and "unredirect
fullscreen windows" enable. A VisibilityNotify event is generated (first
with obscured and than with unobscured) when the window swithces from
redirected to unredirected.
https://bugs.freedesktop.org/show_bug.cgi?id=18133http://launchpad.net/bugs/278112
As proposed by Owen Taylor [1], the enter-leave event model needs to adjust
the events sent to each window depending on the presence of pointers in a
window, or in a subwindow.
The new model can be summarised as:
- if the pointer moves into or out of a window that has a pointer in a child
window, the events are modified to appear as if the pointer was moved out of
or into this child window.
- if the pointer moves into or out of a window that has a pointer in a parent
window, the events are modified to appear as if the pointer was moved out of
or into this parent window.
Note that this model requires CoreEnterLeaveEvent and DeviceEnterLeaveEvent to
be split and treated separately.
[1] http://lists.freedesktop.org/archives/xorg/2008-August/037606.html
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
FirstPointerChild: Return the first child that has a pointer within its
boundaries.
FirstPointerAncestor: return the first ancestor with a child within its
boundaries.
These are required for the updated enter/leave model.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Device events always need to be delivered, core events only in some cases.
Let's keep them completely separate so we can adjust core event delivery.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We need them for each window, every time a window is allocated. Storing them
in a devPrivate is the wrong thing to do.
This also removes the unused ENTER_LEAVE_SEMAPHORE_ISSET macro.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
grab == devgrab anyway, this is a leftover from the time when we had two
different grabs per device (core and XI grab).
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Really, this was a bad idea. It's not security, the UI features that would
have been cool (e.g. clicking through windows) aren't implemented anyway, and
there's nothing you can't achieve just by using plain XI anyway.
Requires inputproto 1.9.99.6.
EnableDevice and DisableDevice both change the property too.
And enabled must be set to FALSE in AddInputDevice, the device is not enabled
yet.
X.Org Bug 18111 <https://bugs.freedesktop.org/show_bug.cgi?id=18111>
dev->enabled is a Bool. Bool is two bytes.
BOOL on the other hand is a protocol type and always 1 byte. So copy the value
into the one-byte type before passing it into XIChangeDeviceProperty.
Found by Michel Dänzer.
X.Org Bug 18111 <http://bugs.freedesktop.org/show_bug.cgi?id=18111>
The current code exposes to inconsistent updates, i.e. if handler N succeeds
but handler N+1 fails in setting the property, an error is returned to the
client although parts of the server now behave as if the property change
succeeded.
This patch adds a "checkonly" parameter to the SetProperty handler. The
handlers are then called twice, once with checkonly set to TRUE.
On the checkonly run, handlers _MUST_ return error codes if the property
cannot be applied. Handlers are not permitted to actually apply the changes.
On the second run, handlers are permitted to apply property changes.
Errors codes returned on the second run are ignored.
For two axes [a, b] and [x, y] (inclusive), the formula to scale point P(ab)
to (x,y) is:
(P - a)/(b - a) * (y - x) + x
And the whole end result rounded of course to get the integer we need.
It's not especially obvious, and unpleasantly overloaded for the Xnest
case. Typically this gives you a server that looks for its auth data in
the authority file you were using for the running X session, which
generally doesn't have an entry for the display you just started.
All the major dm's, and startx, pass -auth explicitly, so this shouldn't
cause too much upheaval.
A property can only be deleted if any of the following is true:
- if a property is deletable and all handlers return Success.
- if a property is non-deleteable and the all handlers return Success AND the
delete request does not come from a client (i.e. driver or the server).
A client can never delete a non-deletable property.
Now that the code has been fixed so that Unmap means unmap and not "don't
remap", 'remap' was confusing to have in the function names/parameters, so
change it to simple 'map'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Since ReparentWindow() does a unmap/map pair for windows that are already
mapped, for saveset windows with SaveSetUnmap, we must unmap the window
before calling ReparentWindow() to avoid the generation of MapRequest
events, and so forth.
For master devices, the ptraccel code could segfault on free since we'd be
dereferencing random memory. Callocing the valuatorClassRec is the easy fix.
This removes yet another xalloc() each server generation. Also, I
couldn't find the corresponding xfree() so I guess that used to be a
memory leak there.
Two corrections
1. the "detail" field has NotifyVirtual, etc., not the "mode" field. This was
a clear bug.
2. don't set/unset the flags for NotifyGrab or NotifyUngrab. Clients are
expected to deal with multiple enter/leave events per window if the mode is
not NotifyNormal.
Testable with TCL menu boxes (such as used in gitk):
tk_optionMenu .menu globVar Val1 Val2 Val3 ValJunk
pack .menu
Thanks to Michel Dänzer for pointing this out.
Unplug a mouse, then warp the pointer and the warp pointer code will try
to update the position of the last slave device associated with the
master. That pointer will be stale and the X server will crash.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was to account for cases where you had video and print screens in
the same server. Lunacy. Leave the slot in ScreenInfo, but rename it,
and stop looking at it.
Add strncasecmp (as we're now using it) in case someone doesn't have it,
and also change strncasecmp args to be const, in accordance with
everything else.
In the map stored in each keyboard device, the first line refers to
minimum keycode, i.e., the 0th line refers to keycode 8. When not
using XKB the wrong test caused some keys to be interpreted as
locks ('m' for instance). The had to be pressed twice to generate
both KeyPress and KeyRelease events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We may need more than one handler to deal with a property (e.g. one in the
driver, one in the DIX), so get the handlers into a linked list and call them
one-by-one. This is of course slightly less entertaining than the hilarious
WRAP/UNWRAP game we play in other parts of the server.
XIRegisterPropertyHandler/XIUnregisterPropertyHandler are the interface
drivers/the DIX should use to attach themselves to the device.
XIDeleteAllDeviceProperties destroys everything, including the handlers.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
This fixes a severe issue - when the client died the event mask didn't get
unregistered and a future event would dereference dangling pointers. By
storing the event masks in the resource system we can free them when the
client dies.
Using id = 0 only worked pre-MPX since XInput didn't allow XOpenDevice for the
core devices (0 and 1). Now we can now legally register for events so we may
overwrite our device-independent classes with the ones selected for the VCP.
So, increase the EMASKSIZE to MAX_DEVICES + 1 and use MAX_DEVICES as the ID
when we don't have a device.
Mixing usage where some parts of the code treated this field as a bitmask
and other parts as an array of card8 was wrong, and as the wire protocol
wanted bitmasks, it was less invasive to switch the newer counting code use
booleans.
Master devices track slave buttons by waiting for all slave buttons to be
released before delivering the release event to the client.
This also removes the state merging code in DeepCopyDeviceClasses -- that
code was changing master device state without delivering any events,
violating protocol invariants. The result will be that existing slave
button state which does not match the master will not be visible through the
master device. Fixing this would require that we synthesize events in this
function, which seems like a bad idea. Note that keyboards have the same
issue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Dereferencing into dev->valuator could crash the server, although it looks
like I could only reproduce this by having a keyboard send an event after it
was created and the WM was still replaying. Or so.
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
Button events were mapped once in GetPointerEvents and then again in
UpdateDeviceState. While it might make sense to just fix up UpdateDeviceState,
it turns out to be better to leave the raw button number in the event because
DGA reports raw device events without button translation, and so when it calls
UpdateDeviceState, the button down counts get scrambled and buttons get stuck
down.
See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036201.html
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
RealizeCursor should be called when the cursor is allocated. However, when the
root cursor is allocated, no devices exist yet, and thus RealizeCursor is
never called. This may lead to segfaults lateron in DDXes like Xnest that
actually need to do something for each cursor, and lateron rely on that
DDX-specific data for each cursor has been initialized.
We only have one set of default rules options in xkb. When the second keyboard
is brought up with Xkb options specified, these new options overwrite the old.
In future server generations, the rules used for the VCK are a mixture of the
default ones and ones previously specified for other keyboards. Simply
resetting the xkb default rules to NULL avoids this issue.
Reproducable by setting XkbLayout "de" and XkbVariant "nodeadkeys". In the
second server generation, the VCK has "us(nodeadkeys)". This again produces a
SIGABRT when the first key is hit.
I could not figure out why the SIGABRT happens. This patch is avoiding the
issue rather than fixing it.
The core protocol requires absolute values and it's a bit hard to get them if
we only have relative ones in the history. Switch the motion history to
absolute, and if we really need the relative values, we can probably generated
them from the abs. ones in the future.
Add each event to the master's MH as well as to the SDs. In the MD, store
min/max and the actual value. When retrieving the MH, rescale all coordinates
to the current coordinate range and only post those valuators that are
currently active on the device.
Since we can't predict how many valuators may be in a future SD attached to an
MD, we need to preallocate a history buffer that is large enough to keep
MAX_VALUATORS coordinates per event.
In addition, the history buffer needs to memorize the coordinate ranges at the
time, thus requiring MDs to store (min_val, max_val, current_val, time)
instead of (current_val, time) for each motion history entry.
This commit only fixes the allocation.
With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
master->last.valuator[x] for x > 2 is undefined. For all other devices, it's
the respective device's last valuators.
If the lastSlave did not have a valuator that is to be updated now, it is
reset to 0.
In GPE, we don't care about the device mode. Let's put the absolute values
into the deviceValuator event and worry about relative valuators on the other
side of the EQ.
Assuming master->last.valuators is in screen coords, SD's are always in device
coordinates.
1. If an event comes in, scale masters->last to the device, drop into device's
last->valuators.
2. Apply motion from the actual event
3. Scale back to screen coords, check if we may need to cross screens
4. Drop screen coords into master->last
5. Rescale to device coords, drop into deviceValuator event and SD->last
6. Drop screen coords into ev->root_x/y
Whoopee...
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
Changed all the checks for x&y valuator so the more complex
calculation is only made once.
Added TODOs for valuator/axis 2 and above for future correct
handling of relative reporting of these.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
valuators[] is passed from the DDX. Depending on the device mode, update it
with either absolute values or relative values. The deviceValuator event sent
to the client will then contain the respective values.
This isn't quite finished yet, but at least it gives us the ability to use a
tablet as a normal mouse - with all the scaling in place.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
Sometimes we didn't have a cursor when coming back from suspend. Reason was
that the suspend caused the server to lose the device that was attached to the
VCP, and a RemoveDevice() would then set the cursor to NULL.
Solution: only set the cursor to NULL if we actually own the sprite.
We pass in the client that wants to create the device anyway, lets use the
parameter instead of hardcoding the serverClient.
Wow. I hope this is merge detritus, otherwise it'd be a sign that I didn't
have enough coffee that day.
XQuartz was crashing because the Appkit thread was trying to GetXXXEvents while the Xserver thread was exiting.
This adds some more sanity checks and avoids that crash
(cherry picked from commit 34ec4bd6ac)
When a new device is added, calculate the event size needed if a DCCE event is
sent and set the EQ's event size to this minimum. This avoids reallocs when a
event is sent (which may happen during a SIGIO).