Previously DLOPEN_LIBS was managed in top-level configure.ac.
Instead bundle it with the code using dl*() functions to
avoid breakages in uncommon configurations.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
- Don't warn for references to deprecated functions in xorg_symbols.
- Ignore functions generated by gl_apitemp.py that are never used.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Existing video drivers will get the console enabled by default.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The message ending up in the log is misleading as to what the quirk
actually does: It ignores the sizes in the detailed timings and
replaces them with the display "Max Image Size".
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This was initially fixed by commit 3932a84857
but then (presumably not intentionally) undone by commit
1d54479cb3 .
Signed-off-by: Hans Nieser <hnsr@xs4all.nl>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
* mattst88/master:
[alpha] assume we have __NR_pciconfig_iobase
[alpha] don't return from void functions
Fix undefined symbols on alpha
Fix breakage on alpha caused by c7680befe5
Revert "alpha: kill xf86SlowBCopyToBus and xf86SlowBCopyFromBus"
The code path if we didn't have support has been broken since before we
switched to git.
The pciconfig_iobase syscall has been supported since 2000.
Signed-off-by: Matt Turner <mattst88@gmail.com>
On 64-bit systems, int and pointers don't have the same size, so GCC gives
warnings about casts between int and pointer types. However, in the cases
covered by this patch, it's always a value that fits in int being stored
temporarily as a pointer and then converted back later, which is safe.
Casting through the pointer-sized integer type intptr_t convinces the
compiler that this is OK.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
When testing if an fd is valid, the required construct is >= 0, not > 0.
[Daniel: Fixed up the Linux MTRR case as well.]
Signed-off-by: Martin Ettl <ettl.martin@gmx.de>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Replaces special handling for Xquartz DDX and scales better to handling
the multiple platforms that now have some level of Dtrace support available.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
All input drivers use xf86PostKeyEventP indirectly now and have been since
it exists. I guess that qualifies it as tested - no need to spam the logs.
Reported-by: Felix Wenk
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Pinpointed by by Michael Cree.
Commit c7680befe5 removed Jensen support, but at the same time broke
support for dense memory systems.
Signed-off-by: Matt Turner <mattst88@gmail.com>
The vesa driver still uses slowbcopy_frombus and slowbcopy_tobus.
This reverts commit 5ef53a94ce.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All input drivers use xf86PostKeyEventP indirectly now and have been since
it exists. I guess that qualifies it as tested - no need to spam the logs.
Reported-by: Felix Wenk
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Keith has shown half the block handlers wrappers are wrong, also
dynamic wrapping/unwrapping from what I can see will happen after
the drivers, so its really accidental ABI, that we can't change
now without modifing drivers. So be safe for 1.7.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Declared-as-sane-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Removing DGA ended up breaking any drivers calling into the old
xf86DiDGAInit function as it tried to see if DGA was already enabled
and ended up crashing if the VT wasn't completely initialized. Oops.
Also, if the driver initializes DGA itself, have the DiDGA
initialization overwrite that information as the DiDGA code will call
ReInit on mode detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If either width or height of DisplaySize is invalid, assume that the
configuration is invalid and use the DDC-reported values instead.
See Comment 9, Bug 9758.
http://bugs.freedesktop.org/show_bug.cgi?id=9758#c9
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dave Airlie <airlied@redhat.com>
I hadn't paid attention that the parameters order had changed, here is a
trivial patch, please apply.
Signed-off-by: Julien Cristau <jcristau@debian.org>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
This removes all rendering and mapping code from xf86DiDGA, leaving
just mode setting and raw input device access. The mapping code didn't
have the offset within /dev/mem for the frame buffer and the pixmap
support assumed that the framebuffer was never reallocated.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The adjusted mode was freed, but any name allocated for that was leaked.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The DIX event queue is allocated before InitInput is called, so fetch
the pointer there and not randomly at other times. This avoids failing
to fetch the pointer sometimes during server regen and then smashing
memory through the stale pointer from the previous server generation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86MatchDevice returned malloc'd storage containing the list of
devices to look at; make sure that gets freed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86LoaderCheckSymbol() is never useful if using externed variable directly.
noPanoramiXExtension will be just used through dlopen() like other extension modules.
Signed-off-by: Shunichi Fuji <palglowr@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Clears warnings about obsolete headers, but raises minimum
required version of xf86driproto to 2.1.0
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
49b93df8a3 made the hard dependency on
a "fixed" font go away but only Xorg could use the built-ins fonts by
default.
With this commit, all DDXs get "built-ins" appended to their FontPath, not
just Xorg.
Tested with Xorg, Xvfb and Xnest.
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
AllowMouseOpenFail description changed to reflect actual behaviour
and point to AllowEmptyInput for previously described behaviour.
Update default DPMS mode timeouts to match new defaults set
in April 2009 by commit d52fddefae
Update autoloaded module list to match ModuleDefaults in xf86Config.c
Update module subdir list to match stdSubdirs in loadmod.c
Add xorg.conf options that were added to the code:
- XkbDir option added in February 2009
by commit 76f18b94bd
- DRI2 option added in April 2008
by 35982bc109
Remove xorg.conf options that were removed from the code:
- XkbDisable option was removed in January 2009
by commit 40877c6680
- PciProbe/Config options were removed in August 2008
by commit fdf7c747a8
- EstimateSizesAggressively was removed in August 2008
by commit cd1e8f2614
- loadable font modules were removed in July 2008
by commit affec10635
- ModInDev options were removed in December 2008
by commit 6de6ffff35
(Also strips some trailing whitespaces to make git happier.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Move misplaced } to get the flow of
if (!ShareVTs) {
VT_ACTIVATE
VT_WAITACTIVE
}
X.Org Bug 11477 <http://bugs.freedesktop.org/show_bug.cgi?id=11477>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
So far there are no apparently issues on not closing the fd. But let's do the
right job here.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Apparently the kernel can't decide on an API to expose to userspace, so
let's just try both in the hope that one will work.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Michel Dänzer <michel@daenzer.net>
In practice, some of the native drivers for older Geode products
have become deprecated due to lack of e.g. libpciaccess upgrade,
but that's OK, since most distributions don't ship them anymore.
In that case, we'll let X server fall back to good old VESA.
Leave consoleFd open over the course of the server, even though any use
of it in this context is likely to be disastrous.
Signed-off-by: Michael Witrant <mike@lepton.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86SlowBCopyToBus and xf86SlowBCopyFromBus cause segfaults on my
system.
Also remove associated slowbcopy_tobus/slowbcopy_frombus macros.
Signed-off-by: Matt Turner <mattst88@gmail.com>
BUSmemcpy.c provides xf86BusToMem and xf86MemToBus, which are are memcpy
wrappers written to avoid glibc's memcpy on Alpha. glibc'c memcpy on
Alpha has improved much since this was written, so it's no longer
needed. Neither function is used inside the xserver, and no module on
my machine uses either as well.
Signed-off-by: Matt Turner <mattst88@gmail.com>
All architectures should be able to use the same unaligned access code,
regardless of whether they need special unaligned access instructions.
Let's let gcc do the heavy lifting.
In the case that we're not using a gcc-compatible compiler, use memmove.
The xserver already requires pixman, so include pixman.h for its uint*_t
types.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Checks for __GNUC__ are superfluous since the only other compiler for
the platform is Compaq C, and it doesn't support GCC style inline
assembly.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Referencing a screen through a drawable only requires GetAttr access.
Treat dri2 drawables as child windows (Add/Remove access).
Treat getting buffers as intent to read/write the drawable.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
The spec says x870, but we actually use x864 because that's a real DMT
mode and x870 isn't. This might or might not be wrong, but we should at
least tell the truth.
This adds support for using the libpciaccess interface for
vga arbitration support on top of a kernel which supports it.
Currently patches are queued for kernel 2.6.32 in jbarnes
pci tree, and shipping in Fedora kernel.
Co-authors:
Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This function was used as the default motion event queue API until
including XINPUT_ABI 2 (server 1.5).
This API was broken with 1883485 in May 2008 (wrong casting of parameters)
and isn't in use by input drivers past ABI 3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The smart scheduler is designed to minimize scheduler overhead by
increasing the interval between WaitForSomething calls when a single
client is running. However, the software rotation code depends on
its BlockHandler being invoked for screen updates; the long delays
caused by the smart scheduler optimizations means that screen updates
can be delayed a long time as well.
The change is simple -- prevent the smart scheduler from increasing
the scheduling interval while any screen is using software rotation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The rotation block handler uses regular driver rendering functions to
repaint the screen, if those functions queue commands in the driver,
it's important that the driver block handler be invoked after the
rotated image is drawn.
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86_reload_cursors restores the cursor to the correct position, but
that must adjust for cursor hot spot and frame before calling down to
the hardware function, otherwise the cursor jumps to the wrong
position until it is repositioned by the user.
Signed-off-by: Keith Packard <keithp@keithp.com>
No one is using bus notifications now. We hope that the kernel take care of
this properly.
For other not-so-urgent-notifications (ACPI wakeups, etc) we can just register
a handler on server's scheduler (using xf86AddGeneralHandler). And for
external applications, the "trend" is to use HAL to kick notifications. So
we're already provided of enough notification schemes.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
commit 48ee555833 (OpenSolaris VT support)
broke the autoconfiguration code in xf86AutoConfig.c that uses the
Solaris-specific VIS_GETIDENTIFIER ioctl on a frame buffer device like
/dev/fb by changing xf86Info.consoleFd from /dev/fb to a /dev/vt/*
device.
This fixes it by reworking the code to split the console device
(/dev/vt/*, the vtXX CLI option) from the frame buffer device
(/dev/fb, -dev option) to allow both VT and autoconfig to work.
It also fixes the console device to use /dev/fb when VT's are not
supported instead of throwing a Fatal Error because it can't open
/dev/vt/0.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
In non-setuid root installations, we shouldn't try to adjust VT/tty
ownership. It will fail, and shouldn't be necessary anyway (since
startup scripts or PAM should be handling perms for us in that case).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The xorg.conf generator was not assigning correctly the primary device
("bootable") as screen zero. So just skip this kind of routines for now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
If you want to run a pre-1999 kernel, you'll need a pre-2009 X server
[Some pre-Solaris 8 VT support is left by this patch to allow reuse by
the new Solaris VT support that follows in the next patch.]
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
We were generating a shared library, but this lib is foobar, the parser
requires some symbols from the X server or from the program its being linked
into. If the program its being linked into (say a python .so) has symbol
visibility enabled then it will fail to dynamic link, also if this .so has
symbol visiblity enabled it will fail to dynamic link.
Screw it go back to a .a file really unless someone cleans it up properly.
Signed-off-by: Dave Airlie <airlied@redhat.com>
xf86PostKeyboardEvent also makes use of xf86PostKeyEventP to avoid code
duplication, and the valuator verification has been split into the
XI_VERIFY_VALUATORS macro.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Inside a windowing system, it's not the place to probe for devices. Goodbye
-probe and -probeonly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Such stupid and ugly way to dump PCI information! Oh boy... Anyway, this
doesn't belong to the X server at all. Go away!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This changes the ABI, but since the video ABI is at 6 already
it should be fine.
driver changes are in the pipeline after this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes screensaver fadeout effects.
Also make all RandR 1.2 compatibility code for XF86VidMode operate only on the
CRTC associated with the compatibility output, not all CRTCs at once.
This was a vestige from the days before we'd make the mode list from the
EDID data, and from CRT technology when you could reasonably assume that
higher refresh rates were better. Also it did not function as advertised,
acting as a high-pass filter instead of a band-pass.
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
Not all chipsets need to rely on the int10 scheme to do its daily work.
Well, the ideal would be to remove all int10 module from the server. I'll try
to provide some patches "soon" for this. Something like:
http://cgit.freedesktop.org/~vignatti/libx86/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Not all drivers need this kind of access as well.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Not all drivers need this kind of access.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
These old interfaces are no longer supported by the server, removing them
requires bumping the video driver ABI. Note that this is not guaranteed to
be the last change in ABI version 6.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The old DRI2 buffer allocation API wasn't great, but there's no reason to
make the server stop working with those drivers. This patch has the
X server adapting to the API provided by the driver, using the new API where
available and falling back to the old API as necessary. A warning will be
placed in the log file when the old API is in use.
Signed-off-by: Keith Packard <keithp@keithp.com>
Otherwise no subsequent driver will be able to claim this pci slot.
Example for this: fbdev tries to claim, but framebuffer device is not
available. Later on VESA cannot claim the device.
The number of input devices is MAXDEVICES, not MAX_DEVICES (f781a752e6)
Two comments updated to refer to MAXDEVICES.
MAX_FUNCS in sigio.c was set to 16 if MAX_DEVICES was undefined. If more
than 15 physical input devices were present, this could result in a
failure to install the SIGIO handler for any device above 15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GIT change
http://cgit.freedesktop.org/xorg/xserver/commit/?id=45c8bd0fe54273039fdaa1eeeafb81b5774f2c75
changed the default symbol visibility of the Xserver. As a result 2 symbols
that are needed by the RandR 1.2/1.3 implementation in the fglrx driver are no
longer visible:
xf86configptr
xf86CursorScreenKey
We would like to get these two symbols _X_EXPORT'ed before Xserver 1.7 is
released. Otherwise it will be problematic for fglrx to support RandR 1.3 on
Xserver 1.7.
In the future, we may want to sync our RandR implementation to later versions
of the RandR implementation in hw/xfree86/modes. Therefore it would be nice if
all symbols used by the Xserver RandR implementation were _X_EXPORT'ed in the
future.
Wrong check for inputInfo.pointer resulted in a SW cursor being rendered when
the pointer left the screen (in a Xinerama setup).
We must call the sprite rendering function if
- SW cursors are enabled, or
- The current device is not the VCP and not attached to the VCP.
Reported-by: Gordon Yuan <GordonYuan@viatech.com.cn>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously when compiling on freebsd amd64 we'd end up at xi86
block (line 1315) which would define mem_barrier and write_mem_barrier
to be NOP's. Instead they should be valid, as per the linux amd64 setup.
This stops the hangs experienced by many when using the nv driver
which would hang due to out of order dma requests as noticed in
http://bugs.freedesktop.org/show_bug.cgi?id=3168
Signed-off-by: Benjamin Close <Benjamin.Close@clearchain.com>
xf86vmode.c:1578: warning: pointer targets in passing argument 1 of
‘SwapShorts’ differ in signedness
../../../../include/misc.h:231: note: expected ‘short int *’ but argument is
of type ‘CARD16 *’
xf86vmode.c:1543: warning: unused variable ‘i’
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
You would think, having finally tightened down the spec, that
monitor vendors would bother to implement what the spec actually
mandates. You would be wrong.
crtc->funcs->lock is NULL, so it's no use calling it here. Move it down so
it's actually defined before we use it.
Introduced with 6f59a81600.
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
This moves code out of each implementation of set_mode_major and back into
the X server. The real feature here is that the transform is now available
in the crtc for use by either xf86CrtcRotate or whatever the driver wants to
do. Without this change, the transform was lost for drivers providing the
set_mode_major interface.
Note that users of this API will want to stop smashing the transformPresent
field, and could also stop setting mode/x/y/rotation for new enough X servers,
but there's no reason to make that change as it will break things when
running against older X servers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Doing so generates the same timings as given in the DMT spec for
120Hz RB, so we should be set there. Other rates might be legal
too but why push our luck.
If you have multiple cards, some that support randr 1.2 and some that don't
you can get a null dereference in here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make xf86 RANDR wrap the EnterVT call chain, so it can re-probe the
outputs when a laptop comes back from suspend/unsuspend (actually, any
time that we enter our VT again). The X server should then send RR*
events to clients, so they can cope with a monitor that was unplugged
while the laptop was suspended.
Signed-off-by: Federico Mena Quintero <federico@novell.com>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Many old monitors zero-fill the detailed descriptors, so check for that
to avoid a useless warning like:
(WW) RADEON(0): Unknown vendor-specific block 0
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
It reports vertical size in cm in the detailed mode.
X.Org bug#21750 <http://bugs.freedesktop.org/show_bug.cgi?id=21750>
Reported-by: Peter Poklop <Peter.Poklop@gmx.at>
Signed-off-by: Julien Cristau <jcristau@debian.org>
This way clients querying the gamma value via the VidMode extension at least
get the last value set via the same, rather than always something bogus.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
The reciprocal gamma value was missed in the first copy and this mistake was
propagated to the second one.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Error: Write outside array bounds at Xext/geext.c:406
in function 'GEWindowSetMask' [Symbolic analysis]
In array dereference of cli->nextSib[extension] with index 'extension'
Array size is 128 elements (of 4 bytes each), index <= 128
Error: Buffer overflow at dix/events.c:592
in function 'SetMaskForEvent' [Symbolic analysis]
In array dereference of filters[deviceid] with index 'deviceid'
Array size is 20 elements (of 512 bytes each), index >= 0 and index <= 20
Error: Read buffer overflow at hw/xfree86/loader/loader.c:226
in function 'LoaderOpen' [Symbolic analysis]
In array dereference of refCount[new_handle] with index 'new_handle'
Array size is 256 elements (of 4 bytes each), index >= 1 and index <= 256
These bugs were found using the Parfait source code analysis tool.
For more information see http://research.sun.com/projects/parfait
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A driver with this hook will take care of preparing the outputs & crtcs,
so calling the prepare functions will just cause unnecessary flicker.
Fixes bug #21077
For redirected rendering we end up with pixmaps (which the app thinks are
windows) that are double buffered.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Pierre Willenbrock <pierre@pirsoft.de>
Zapping is triggered by xkb these days, so note in the man page that it's the
Terminate_Server action. Since it's XKB, personal preferences towards or
against zapping should be achieved through xkb rulesets.
If Terminate_Server is not in the xkb actions, then we can't zap anyway and we
don't need a default of DontZap "on".
This patch restores the old meaning of DontZap - disallow zapping altogether,
regardless of XKB's current keymap.
Ideally, this patch should be accompanied by b0f64bdab00db652e in
xkeyboard-config.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This change implements the protocol for DRI2GetBuffersWithFormat, but
the bulk of the differences are the changes to the extension / driver
interface to make this function work. The old CreateBuffers and
DeleteBuffers routines are replaced with CreateBuffer and DeleteBuffer
(both singular).
This allows drivers to allocate buffers for a drawable one at a time.
As a result, 3D drivers can now allocate the (fake) front-buffer for a
window only when it is needed. Since 3D drivers only ask for the
front-buffer on demand, the real front-buffer is always created. This
allows CopyRegion impelemenations of SwapBuffers to continue working.
As with previous version of this code, if the client asks for the
front-buffer for a window, we instead give it the fake front-buffer.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
commit 64b7f96dca accidentally inverted the comparison, could
result in crashes on some systems later on.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
This prevents building an older server with a new dri2proto.h from
resulting in a DRI2 extension module that lies about the version it
supports.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>