Works around a silly bug in the kernel that causes wakeup storms after
too many keypresses. Should fix the kernel bug too, but this at least
keeps the idle wakeup count below 1000/sec.
When a user specifies the position of an output for which no modes exist
(for whatever reason) assume that the width and height of this output
is 0. The result will be the same as if this output isn't taken into
consideration at all and thus should be sane. It will prevent a segfault
when trying to determine the width and height of a non-existent mode.
This is used in libGL to determine a preferred visual. glxinfo -v will also
report "visualCaveat=Slow" for such visuals.
(cherry picked from commit d5c17f585a)
Also merge sun_bios.c into sun_vid.c and upstream Solaris patch to
keep aperture device open, to allow mappings to occur after X server
has given up uid 0.
Maybe one day I stop doing stupid patches like
a3a7c12fcf.
So, if X < low, reset to low, and _not_ to high.
If X > high, reset to high, and _not_ to low.
It seems that we were calling copy_completed: too soon. Now we return instead
of falling through to the free_propdata, and copy_completed:.
(cherry picked from commit 5797d5b662)
This may work, unfortunately I don't have test apps that fail.
The way it works is by using an NSImage class initWithPasteboard:
method, which we then get the TIFFRepresentation of, and convert
to PNG or JPEG.
The TIFFRepresentation uses NSTIFFCompressionNone; which should be
lossless.
(cherry picked from commit 8d048cfa95)
This gives us a *lot* more visuals, and they should be more accurate.
Some of the visuals may have been wrong before. This may enable more
OpenGL programs to behave correctly.
I also suspect libGL needs a little work to handle some of these correctly.
(cherry picked from commit 98a084ce9c)
This consists of two parts:
In the implicit server layout, ignore those drivers when looking for a core
device.
And after finishing the server layout, run through the list of devices and
remove any that use mouse or kbd.
AEI is mutually exclusive with the kbd and mouse drivers, so pick either - or.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The precedence of == is higher than that of &, so that code was
probably buggy.
xf86Init.c: In function 'DoModalias':
xf86Init.c:300: warning: suggest parentheses around comparison in operand of &
xf86Init.c:304: warning: suggest parentheses around comparison in operand of &
xf86Init.c:308: warning: suggest parentheses around comparison in operand of &
xf86Init.c:136: warning: function declaration isn't a prototype
xf86Init.c:243: warning: function declaration isn't a prototype
xf86Init.c:249: warning: function declaration isn't a prototype
xaaInit.c: In function 'XAAInit':
xaaInit.c:201: warning: implicit declaration of function 'miInitializeCompositeWrapper'
xaaInit.c:201: warning: nested extern declaration of 'miInitializeCompositeWrapper'
Add missing includes to fix the following warnings:
xf86DGA.c: In function 'DGAProcessKeyboardEvent':
xf86DGA.c:1050: warning: implicit declaration of function 'UpdateDeviceState'
xf86DGA.c:1050: warning: nested extern declaration of 'UpdateDeviceState'
xf86Xinput.c: In function 'xf86ActivateDevice':
xf86Xinput.c:303: warning: implicit declaration of function 'AssignTypeAndName'
xf86Xinput.c:303: warning: nested extern declaration of 'AssignTypeAndName'
xf86Xinput.c:311: warning: implicit declaration of function 'DeviceIsPointerType'
xf86Xinput.c:311: warning: nested extern declaration of 'DeviceIsPointerType'
xf86Xinput.c:324: warning: implicit declaration of function 'XkbSetExtension'
xf86Xinput.c:324: warning: nested extern declaration of 'XkbSetExtension'
Add automatic detection of the graphic driver to load for sbus devices.
This allows xorg to work on those devices without a "Device" section.
Debian bug#483942.
Signed-off-by: Julien Cristau <jcristau@debian.org>
We need to revisit the GL/indirect.c changes. I think indirect.c should
be using the same feature detection and GLX visual config code. The
indirect changes will require testing...
(cherry picked from commit 49b7a7c6f2)
Also set AutoAddDevices and AutoEnableDevices to their defaults.
And in doing so, switch the rest of the defaults over to named intializers.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Add dump_prefs() for instrospection.
Make prefs_get_bool a little more clear.
In get_property don't assume that the Mac realloc(NULL, 0); returns
non-NULL. We shouldn't depend on implementation-defined behavior too
much.
Add more commentary in various spots.
Add TARGETS in the TARGETS response. I don't know why some X11 apps
do this, but it could be something that some weird toolkit/app tests
for.
In reload_preferences add preferences synchronization, so that xpbproxy
reloads the preferences, and picks up any changes.
Fix a typo/misspelling of the sync_clipboard_to_pasteboard preference.
(cherry picked from commit 165cbbb90c)
Usually, the console is set to RAW in the kbd driver. If we hotplug all input
devices (i.e. the evdev driver for keyboards) and the console is left as-is.
As a result, the evdev driver must put an EVIOCGRAB on the device to avoid
characters leaking onto the console. This again breaks many things, amongst
them lirc, in-kernel mouse button emulation and HAL.
This patch sets the console to RAW if AllowEmptyInput is on.
Use-cases:
1. AEI is off
1.1. Only kbd driver is used - behaviour as-is.
1.2. kbd and evdev driver is used: if evdev does not grab the device,
duplicate events are generated.
2. AEI is on
2.1. Only evdev driver is used - behaviour as-is, but evdev does not need
to grab the device anymore.
2.2. evdev and kbd are used: duplicate key events are generated if evdev
does not grab the device.
1.2 is a marginal use-case that can be fixed by adding a "grab" option to the
evdev driver (update of xorg.conf is needed).
2.2 is an issue. If we have no ServerLayout section, AEI is on, but devices
specified in the xorg.conf are still added [1], resulting in duplicate events.
This is a common configuration and needs sorting out.
[1] 2eaed4a10f
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
I've seen about one case in three years where this has actually been
correlated with the real cause of failure, and we've trained people to
freak out about X_WARNING, so let's be less alarmist.
Very cute, Samsung, not only do you claim to be 16cm by 9cm in the
global size record, you also claim to be 160mm by 90mm in the detailed
timings. Grrr.
If absolute events were posted, dixflags got set conditionally on whether the
valuators are different from the last posted set of values.
If dixflags are undefined however, the DIX interprets them as relative
valuators. Fix this by making sure defining dixflags is always defined.
X.Org Bug 17724 <http://bugs.freedesktop.org/show_bug.cgi?id=17734>
NIDR should be used to create a new SD from e.g. within a driver.
DIDR should be used to remove a device from the server.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Use ErrorF for an error message after an xcalloc failure, and return instead of falling through to GlxSetVisualConfigs, or abort()ing at the test branch.
(cherry picked from commit 1056700971)
If you need to bail out the server, use Ctrl-Alt-Fx, or enable zapping
if it bothers you that much. If Ctrl-Alt-Fx is broken, nag me until
it's permanently fixed.
The nvidia driver currently uses these hooks to work around problems where RAC
will disable access to the hardware at unexpected times. This change restores
these hooks until we can come up with a better API for working around RAC.
This reverts commit c1df4fbede.
The nvidia driver currently uses these callbacks to work around problems where
RAC will disable access to the hardware at unexpected times. This change
restores these hooks until we can come up with a better API for working around
RAC.
This reverts commit d7c0ba2e9e.
Conflicts:
hw/xfree86/loader/xf86sym.c
Some BIOSes (hi XGI!) will attempt to enumerate the PCI bus by asking
for the config space of every possible device number. This despite
perfectly functional BIOS methods to enumerate the bus exactly.
If anyone can come up with an example of a bus where:
- both i/o and memory resources are addressable
- access to them can be controlled
- but they can't be controlled independently
then by all means, reinstate this logic.
instead of calling CFRunLoopRun() directly. The leak wasn't reproducible on
this machine, but someone was able to produce a leak trace with Instruments
that indicates it was leaking in the CFRunLoopRun() path.
x-input.m: dequeue and ignore events when pbproxy_active is false.
x-selection.h: add an is_active method that is used by x-input.m to ignore
events.
x-selection.m: Handle nearly every preference, except for primary_on_grab,
which I don't really understand yet.
(cherry picked from commit 4d51ad851e)
Remove some unnecesssary headers.
Remove some dead code that was never called or used in pbproxy.
Make use of an NSAutoreleasePool in x_init. It could potentially cause a leak
on a startup without this.
Start adding reload_preferences to the x_selection class, as well as event
handling for that.
(cherry picked from commit 602e8ba8f7)