Renaming glamor_priv->dispatch and wrapping the access to
the dispatch table with a function that also ensured the
context was bound.
dispatch = glamor_get_dispatch(glamor_priv);
...
glamor_put_dispatch(glamor_priv);
So that we catch all places where we attempt to call into GL withouta
context. As an optimisation we can then do glamor_get_context();
glamor_put_context() around the rendering entry points to reduce the
frequency of having to restore the old context. (Along with allowing
the context to be recursively acquired and making the old context part of
the glamor_egl state.)
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
We add a new gl_fbo status GLAMOR_FBO_DOWNLOADED to indicate
the fbo was already downloaded to CPU. Then latter the access
to this pixmap will be treated as pure CPU access. In glamor,
if we fallback to DDX/fbXXX, then we fallback everything
currently. We don't support to jump into glamor acceleration
layer between a prepare_access/finish_access. Actually, fbCopyPlane
is such a function which may call to acceleration function within
it. Then we must mark the downloaded pixmap to another state
rather than a normal fbo textured pixmap, and then stick to use
it as a in-memory pixmap.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Tested-by: Peng Li <peng.li@intel.com>
Concentrate checking the size/depth when creating fbo. Simply
the pixmap creation and the uploading fbo/texture preparing.
Also slightly change the uploading fbo's preparation. If don't
need fbo, then a fbo only has valid texture should be enough
to return.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Just an initial implementation and disabled by default.
When uploading a pixmap to a texture, we don't really want
to attach the texture to any fbo. So add one fbo type
which doesn't has a gl FBO attached to it.
This commit can increase the cairo-trace's performance by
10-20%. Now the firefox-planet-gnome is 8.3s. SNA is still
the best, only take 3.5s.
Thanks for Chris to point out the A1 pixmap uploading bug.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Fixup three special cases, one is in tile and the other is in
composite. Both cases are due to repeat texture issue. Maybe
we can refine the shader to recalculate texture coords to
support partial texture's repeating.
The third is when upload a memory pixmap to texture, as now
the texture may not have the exact size as the pixmap, we
should not use the full rect coords.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
We classify the cache according to the texture's format/width/height.
As openGL doesn't allow us to change a texture's format/width/height
after the internal texture object is already allocated, we can't
just calculate the size and then according ths size to put the
fbo to an bucket which is just like SNA does. We can only put
the fbo to the corresponding format/width/height bucket.
This commit only support the exact size match. The following patch
will remove this restriction, just need to handle the repeat/tile
case when the size is not exactly match.
Should use fls instead of ffs when decide the width/height bucket,
thanks for Chris to point this out.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
This is the first patch to implement a fbo/tex pool mechanism which
is like the sna's BO cache list. We firstly need to decopule the
fbo/tex from each pixmap. The new glamor_pixmap_fbo data
structure is for that purpose. It's somehow independent to each
pixmap and can be reused latter by other pixmaps once it's detached
from the current pixmap.
And this commit also slightly change the way to create a
memory pixmap. We will not create a pixmap private data structure
by default, instead we will crete that structure when a memory
pixmap is attaching a fbo to it.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As we now add the checking to the Macro, we don't need to check
the pointer outside the Macro.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
When glamor is rendering pixmaps, and needs to create some
temporary pixmap, it's better to use glamor version create
pixmap directly. As if goes to external DDX's create pixmap,
it may create a external DRM buffer which is not necessary.
All the case within glamor scope is to create a texture only
pixmap or a in memory pixmap.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Exports all necessary rendering functions to DDx drivers, including
CopyArea, Glyphs, Composite, Triangles, ....
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Create a new structure glamor_gl_dispatch to hold all the
gl function's pointer and initialize them at run time ,
rather than use them directly. To do this is to avoid
symbol conflicts.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
There are two places we need to do color conversion.
1. When upload a image data to a texture.
2. When download a texture to a memory buffer.
As the color format may not be supported in GLES2. We may
need to do the following two operations to convert dat.
a. revert argb to bgra / abgr to rgba.
b. swap argb to abgr / bgra to rgba.
Signed-off-by: Zhigang Gong <zhigang.gong@gmail.com>
As glVertexPointer is not supported by GLES2, I totally
replaced it by VertexAttribArray. This commit remove those
old code.
Signed-off-by: Zhigang Gong <zhigang.gong@gmail.com>
As some platform doesn't support to use ALPHA8 texture as
draw target, we have to disable it. It seems there is no
easy way to check that.
Signed-off-by: Zhigang Gong <zhigang.gong@gmail.com>
Glamor doesn't need to use GLEW. We can parse the extension by
ourself. This patch also fix the fbo size checking from a hard
coded style to a dynamic checking style.
Signed-off-by: Zhigang Gong <zhigang.gong@gmail.com>
ES2.0 doesn't support QUADS and also doesn't support
some EXT APIs. Fix some of them in this commit.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
When we need to solid fill an entire pixmap with a specific color,
we do not need to draw it immediately. We can defer it to the
following occasions:
1. The pixmap will be used as source, then we can just use a shader
to instead of one copyarea.
2. The pixmap will be used as target, then we can do the filling
just before drawing new pixel onto it. The filling and drawing
will have the same target texture, we can save one time of
fbo context switching.
Actually, for the 2nd case, we have opportunity to further optimize
it. We can just fill the untouched region.
By applying this patch, the cairo-trace for the firefox-planet-gnome's
rendering time decrease to 14seconds from 16 seconds.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
If the pixmap is write-only, then use a pbo mapping will not
get too much benefit. And even worse, when the software
rendering is access this mapped data range, it's much slower
than just using a system memory. From the glamor_prepare_access
glamor_finish_access view, we have two options here:
option 1:
1.0 create a pbo
1.1 copy texture to the pbo
1.2 map the pbo to va
1.3 access the va directly in software rendering.
1.4 bind the pbo as unpack buffer & draw it back to texture.
option 2:
2.0 allocate a block memory in system memory space.
2.1 read the texture memory to the system memory.
2.2 access the system memory and do rendering.
2.3 draw the system memory back to texture.
In general, 1.1 plush 1.2 is much faster than 2.1.
And 1.3 is slower than 2.2. 1.4 is faster than 2.3.
If the access mode is read only or read write, option 1
may be fater, but if the access mode is write only. Then
most of the time option 1 is much faster.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
When try to upload a pixmap without yInverted set, we must
set up a fbo for it to do the y flip. Previous implementation
only consider the ax bit. After fix this problem, we can
enable the dynamic uploading feature in copyarea function when
the yInverted is not set (from Xephyr).
Signed-off-by: Zhigang Gong <zhigang.gong@gmail.com>
Major refactoring.
1. Rewrite the pixmap texture uploading and downloading functions.
Add some new functions for both the prepare/finish access and
the new performance feature dynamic texture uploading, which
could download and upload the current image to/from a private
texture/fbo. In the uploading or downloading phase, we need to
handle two things:
The first is the yInverted option, If it set, then we don't need
to flip y. If not set, if it is from a dynamic texture uploading
then we don't need to flip either if the current drawing process
will flip it latter. If it is from finish_access, then we must
flip the y axis.
The second thing is the alpha channel hanlding, if the pixmap's
format is something like x8a8r8g8, x1r5g5b5 which means it doesn't
has alpha channel, but it do has those extra bits. Then we need to
wire those bits to 1.
2. Add almost all the required picture format support.
This is not as trivial as it looks like. The previous implementation
only support GL_a8,GL_a8r8g8b8,GL_x8r8g8b8. All the other format,
we have to fallback to cpu. The reason why we can't simply add those
other color format is because the exists of picture. one drawable
pixmap may has one or even more container pictures. The drawable pixmap's
depth can't map to a specified color format, for example depth 16 can
mapped to r5g6b5, x1r5g5b5, a1r5g5b5, or even b5g6r5. So we can't get
get the color format just from the depth value. But the pixmap do not
has a pict_format element. We have to make a new one in the pixmap
private data structure. Reroute the CreatePicture to glamor_create_picture
and then store the picture's format to the pixmap's private structure.
This is not an ideal solution, as there may be more than one pictures
refer to the same pixmap. Then we will have trouble. There is an example
in glamor_composite_with_shader. The source and mask often share the
same pixmap, but use different picture format. Our current solution is to
combine those two different picture formats to one which will not lose any
data. Then change the source's format to this new format and then upload
the pixmap to texture once. It works. If we fail to find a matched new
format then we fallback.
There still is a potential problem, if two pictures refer to the same
pixmap, and one of them destroy the picture, but the other still remained
to be used latter. We don't handle that situation currently. To be fixed.
3. Dynamic texture uploading.
This is a performance feature. Although we don't like the client to hold
a pixmap data to shared memory and we can't accelerate it. And even worse,
we may need to fallback all the required pixmaps to cpu memory and then
process them on CPU. This feature is to mitigate this penalty. When the
target pixmap has a valid gl fbo attached to it. But the other pixmaps are
not. Then it will be more efficient to upload the other pixmaps to GPU and
then do the blitting or rendering on GPU than fallback all the pixmaps to CPU.
To enable this feature, I experienced a significant performance improvement
in the Game "Mines" :).
4. Debug facility.
Modify the debug output mechanism. Now add a new macro:
glamor_debug_output(_level_, _format_,...) to conditional output some messages
according to the environment variable GLAMOR_DEBUG. We have the following
levels currently.
exports GLAMOR_DEBUG to 3 will enable all the above messages.
5. Changes in pixmap private data structure.
Add some for the full color format supports and relate it to the pictures which
already described. Also Add the following new elements:
gl_fbo - to indicates whether this pixmap is on gpu only.
gl_tex - to indicates whether the tex is valid and is containing the pixmap's
image originally.
As we bring the dynamic pixmap uploading feature, so a cpu memory pixmap may
also has a valid fbo or tex attached to it. So we will have to use the above
new element to check it true type.
After this commit, we can pass the rendercheck testing for all the picture formats.
And is much much fater than fallback to cpu when doing rendercheck testing.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
