This was to account for cases where you had video and print screens in
the same server. Lunacy. Leave the slot in ScreenInfo, but rename it,
and stop looking at it.
Add strncasecmp (as we're now using it) in case someone doesn't have it,
and also change strncasecmp args to be const, in accordance with
everything else.
In the map stored in each keyboard device, the first line refers to
minimum keycode, i.e., the 0th line refers to keycode 8. When not
using XKB the wrong test caused some keys to be interpreted as
locks ('m' for instance). The had to be pressed twice to generate
both KeyPress and KeyRelease events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We may need more than one handler to deal with a property (e.g. one in the
driver, one in the DIX), so get the handlers into a linked list and call them
one-by-one. This is of course slightly less entertaining than the hilarious
WRAP/UNWRAP game we play in other parts of the server.
XIRegisterPropertyHandler/XIUnregisterPropertyHandler are the interface
drivers/the DIX should use to attach themselves to the device.
XIDeleteAllDeviceProperties destroys everything, including the handlers.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
This fixes a severe issue - when the client died the event mask didn't get
unregistered and a future event would dereference dangling pointers. By
storing the event masks in the resource system we can free them when the
client dies.
Using id = 0 only worked pre-MPX since XInput didn't allow XOpenDevice for the
core devices (0 and 1). Now we can now legally register for events so we may
overwrite our device-independent classes with the ones selected for the VCP.
So, increase the EMASKSIZE to MAX_DEVICES + 1 and use MAX_DEVICES as the ID
when we don't have a device.
Mixing usage where some parts of the code treated this field as a bitmask
and other parts as an array of card8 was wrong, and as the wire protocol
wanted bitmasks, it was less invasive to switch the newer counting code use
booleans.
Master devices track slave buttons by waiting for all slave buttons to be
released before delivering the release event to the client.
This also removes the state merging code in DeepCopyDeviceClasses -- that
code was changing master device state without delivering any events,
violating protocol invariants. The result will be that existing slave
button state which does not match the master will not be visible through the
master device. Fixing this would require that we synthesize events in this
function, which seems like a bad idea. Note that keyboards have the same
issue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Dereferencing into dev->valuator could crash the server, although it looks
like I could only reproduce this by having a keyboard send an event after it
was created and the WM was still replaying. Or so.
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
Button events were mapped once in GetPointerEvents and then again in
UpdateDeviceState. While it might make sense to just fix up UpdateDeviceState,
it turns out to be better to leave the raw button number in the event because
DGA reports raw device events without button translation, and so when it calls
UpdateDeviceState, the button down counts get scrambled and buttons get stuck
down.
See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036201.html
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
RealizeCursor should be called when the cursor is allocated. However, when the
root cursor is allocated, no devices exist yet, and thus RealizeCursor is
never called. This may lead to segfaults lateron in DDXes like Xnest that
actually need to do something for each cursor, and lateron rely on that
DDX-specific data for each cursor has been initialized.
We only have one set of default rules options in xkb. When the second keyboard
is brought up with Xkb options specified, these new options overwrite the old.
In future server generations, the rules used for the VCK are a mixture of the
default ones and ones previously specified for other keyboards. Simply
resetting the xkb default rules to NULL avoids this issue.
Reproducable by setting XkbLayout "de" and XkbVariant "nodeadkeys". In the
second server generation, the VCK has "us(nodeadkeys)". This again produces a
SIGABRT when the first key is hit.
I could not figure out why the SIGABRT happens. This patch is avoiding the
issue rather than fixing it.
The core protocol requires absolute values and it's a bit hard to get them if
we only have relative ones in the history. Switch the motion history to
absolute, and if we really need the relative values, we can probably generated
them from the abs. ones in the future.
Add each event to the master's MH as well as to the SDs. In the MD, store
min/max and the actual value. When retrieving the MH, rescale all coordinates
to the current coordinate range and only post those valuators that are
currently active on the device.
Since we can't predict how many valuators may be in a future SD attached to an
MD, we need to preallocate a history buffer that is large enough to keep
MAX_VALUATORS coordinates per event.
In addition, the history buffer needs to memorize the coordinate ranges at the
time, thus requiring MDs to store (min_val, max_val, current_val, time)
instead of (current_val, time) for each motion history entry.
This commit only fixes the allocation.
With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
master->last.valuator[x] for x > 2 is undefined. For all other devices, it's
the respective device's last valuators.
If the lastSlave did not have a valuator that is to be updated now, it is
reset to 0.
In GPE, we don't care about the device mode. Let's put the absolute values
into the deviceValuator event and worry about relative valuators on the other
side of the EQ.
Assuming master->last.valuators is in screen coords, SD's are always in device
coordinates.
1. If an event comes in, scale masters->last to the device, drop into device's
last->valuators.
2. Apply motion from the actual event
3. Scale back to screen coords, check if we may need to cross screens
4. Drop screen coords into master->last
5. Rescale to device coords, drop into deviceValuator event and SD->last
6. Drop screen coords into ev->root_x/y
Whoopee...
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
Changed all the checks for x&y valuator so the more complex
calculation is only made once.
Added TODOs for valuator/axis 2 and above for future correct
handling of relative reporting of these.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
valuators[] is passed from the DDX. Depending on the device mode, update it
with either absolute values or relative values. The deviceValuator event sent
to the client will then contain the respective values.
This isn't quite finished yet, but at least it gives us the ability to use a
tablet as a normal mouse - with all the scaling in place.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
Sometimes we didn't have a cursor when coming back from suspend. Reason was
that the suspend caused the server to lose the device that was attached to the
VCP, and a RemoveDevice() would then set the cursor to NULL.
Solution: only set the cursor to NULL if we actually own the sprite.
We pass in the client that wants to create the device anyway, lets use the
parameter instead of hardcoding the serverClient.
Wow. I hope this is merge detritus, otherwise it'd be a sign that I didn't
have enough coffee that day.
XQuartz was crashing because the Appkit thread was trying to GetXXXEvents while the Xserver thread was exiting.
This adds some more sanity checks and avoids that crash
(cherry picked from commit 34ec4bd6ac)
When a new device is added, calculate the event size needed if a DCCE event is
sent and set the EQ's event size to this minimum. This avoids reallocs when a
event is sent (which may happen during a SIGIO).
This variable was used originally to determine which client is allowed to
change the pointer-keyboard pairing. For now, we just let anyone change it and
see how that works out.
(cherry picked from commit 4e2c6dbabdbbaaca213fd08edd422de15d0900cc)
required because of commit 7c0709a736,
which made requestingClient in dix specific to Xprint only.
Add to XPRINT_LIBS in hw/xprint/Makefile.am in front of
$(XSERVER_LIBS) to override definitions in libdix.la for standard xservers.
Follows 571206832d (providing -DXPRINT
to xprint subdirs).
Note it may be possible to restructure the code so that
requestingClient is stored elsewhere than in dix. See discussions
following http://lists.freedesktop.org/archives/xorg/2008-March/033844.html
If this is done it may be possible to revert this commit (if not 571206...).
Rather than freeing/allocing classes each time the device capabilities need to
swap, store them in the devPrivates system.
When a class is unused, it is pushed into the devPrivates, and later recovered
when needed again. This saves us a lot of memory allocations/frees, admittedly
on the cost of some memory.
The DDX (xfree86 anyway) maintains its own device list in addition to the one
in the DIX. CloseDevice will only remove it from the DIX, not the DDX. If the
server then restarts (last client disconnects), the DDX devices are still
there, will be re-initialised, then the hal devices come in and are added too.
This repeats until we run out of device ids.
This also requires us to strdup() the default pointer/keyboard in
checkCoreInputDevices.
X.Org Bug 14418 <http://bugs.freedesktop.org/show_bug.cgi?id=14418>
The device classes aren't deleted anymore on a class change, so there's no
need to store the MD's original classes. We should however restore the MD to
sane defaults when disconnecting the last device, consider this as TODO item.
Instead of a simple counter, use bits to keep track of which device is where
etc. When device enters a window (or sets focus), the bit matching the device
is set, when it leaves again, it is unset. If there are 0 bits set, then
Leave/Enter/Focus events may be sent to the client.
Same theory as before, but this should get around the insanity with
Grab/Ungrab special cases. Those cases are basically untested though.
If an pointer event is being processed during a device grab, don't deliver it
to the focus window, even if the device has a focus class. Reason being that
some pointers may have a focus class, thus killing drag-and-drop.
InitializeSprite won't create a new one if it already exists, with the result
of overwriting the master's sprite. This master sprite is then assigned to the
floating slave, and freed when the slave is reattached later.
Setting the sprite to NULL forces InitializeSprite to alloc a new one, and
this one can be freed without further repercussions.
Add Prox events to the if-clauses with the other events
that are usually sent from the input devices.
Ensure that the event deliverers won't try to deliver
events of type '0' (some extended events doesn't have
an equivalent core-type)
Small modification by Peter Hutterer.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
XkbFinishDeviceInit does the following:
xkbi->kbdProc= pXDev->kbdfeed->CtrlProc;
pXDev->kbdfeed->CtrlProc= XkbDDXKeybdCtrlProc;
If we directly copy the device classes for the VCK, pXDev->kbdfeed->CtrlProc
at the time of copying is still XbkDDXKeybdCtrlProc. So at some point
XkbDDXKeybdCtrlProc is called, and calls itself, and calls itself, and...
Setting the device's classes to NULL seems to fix things. The memory isn't
lost, it gets stored into the devPrivates and freed at device closing time.
To recap: the original XC-SECURITY extension disallowed background "None" if
the window was untrusted. XACE 1.0 preserved this check as a hook function.
XACE pre-2.0 removed the hook and first abolished background "None entirely,
then restored it as a global on/off switch in response to Bug #13683.
Now it's back to being per-window, via a flag instead of a hook function.
Before we enable the device through the driver, we size it up and make sure
that the events in the event list contain enough bytes for a possible
ClassesChangedEvent lateron.
The latter is used to increase the amount of allocated memory for the event
list. This will be needed for ClassesChangedEvents that can be of more or less
arbitrary size (larger than 32 anyway).
Rather than letting the DDX allocate the events, allocate them once in the DIX
and just pass it around when needed.
DDX should call GetEventList() to obtain this list and then pass it into
Get{Pointer|Keyboard}Events.
AllowAll is the last check before the parent window is checked. This allows
to override a DenyAll in the parent window in a simpler way than before (the
previous method required all devices to be in the permit list).
In the case that the device cursor was the first in the list of cursors
the window knew about, unsetting the cursor could lead to a segfault
due to pPrev being NULL. Instead catch the condition and correctly remove
the node from the list. Since there is no cursor now set on the device,
we simply return success as the parent windows cursor will propogate
down later.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
Relative events that generates both core and extention
events will have its axis cliped and screen changed by
miPointerSetPosition when the events are processed. For
absolute and non core-generating relative events the
axis must be clipped if we shouldn't end up completely
outside the defined ranges (if any).
Don't use a possitive value as a marker for if a max-value
is defined on the valuators. Use the existence of a valid
value range instead. This will also make it possible to
define arbitrary start and end-values for min and max as
long as min < max.
The correct thing would be to return the ClientPointer. However, if the client
for some reason has a core grab on another device (e.g. as result of a passive
grab), return the coordinates of the grabbed device instead.
This makes the use of nautilus a bit saner.
If the window being changed is set as the motion hint window for any device,
the device's motion hint window is set to NULL. Which is kinda what the old
code did, except that it did it with only the VCP.
Composite uses an unmap/map cycle to trigger backing pixmap allocation
and cliprect recomputation when a window is redirected or unredirected.
To avoid protocol visible side effects, map and unmap events are
disabled temporarily. However, when a window is unmapped it is also
removed from grabs and loses focus, but these state changes are not
disabled.
This change supresses the unmap side effects during the composite
unmap/map cycle and fixes this bug:
http://bugzilla.gnome.org/show_bug.cgi?id=488264
where compiz would cause gnome-screensaver to lose its grab when
compiz unredirects the fullscreen lock window.
This is a significant shift in how input events are perceived. The common
approach was to treat a core event as a different entity than the XI event.
This could result in the XI event being delivered to a different client than
the core event. This doesn't work nicely if they come from the same device.
Instead, we treat an input event as a single event, that is delivered through
two separate APIs. So when delivering an event, we first try the XI event,
then the core event. If the window want's neither, we go to the parent and
repeat. Once either core or XI has been delivered, the processing stops.
Important: Different to the previous method, if a client registers for core
button events, the parent window will not get XI events. This should only
cause problems when you're mixing core and XI events, so don't do that!
Generic events don't fit into this yet, they cause me headaches.
This should restore the correct passive grab processing. When checking for
passive grabs, the core event is emulated and we check first for XI grabs on
the window, then for core grabs. Regardless of which event activates the grab,
the XI event is stored in the device's EQ.
When replaying the event, we take the XI event and replay it on the next
window, again including the emulation of the core event.
If two devices are attached to the same master device, pressing button 1 on
each of them leads to two button presses from the same device. Some apps
really don't like that.
So we just put a counter in place and only send the first press and the last
release.
(first_valuator + num_valuators) must never be larger than the number of axes,
otherwise DIX freaks out. And from looking at libXI, anything larger than 6 is
wrong too.
(cherry picked from commit 9f6ae61ad1)
General code cleanup, whitespace, dead code removal, added missing prototypes.
Made Xquartz come to foreground later in startup, so it doesn't appear for Xquartz -version
(cherry picked from commit 36922e8ff4)
From the X11 protocol spec:
"If background None is specified, the window has no defined background."
This means that toolkits and apps cannot rely on the "transparent" nature
of the current implementation! At some point before the next release,
XACE will switch back to a solid background as the default.
(first_valuator + num_valuators) must never be larger than the number of axes,
otherwise DIX freaks out. And from looking at libXI, anything larger than 6 is
wrong too.
Initialise num_events to 1, so we always send a proximity event, and then
optionally valuator events. Also make sure mieq can deal with valuator
events sent after proximity events.
If we have one global filter, one pointer may change the filter value and
affect another pointer.
Reproduceable effect:
blackbox and xterm, start dragging xterm then click anywhere with the other
pointer (attached to different masterd device!). The button release resets
the filter[Motion_Filter(button)] value, thus stopping dragging and no event
is sent to the client anymore.
Having the filters set per device gets around this.
In some cases (e.g. using x2x) the previous model broke, with a window ending
not counting down to 0 anymore. Special treatment for NotifyUngrab seems to
help here.
Current solution: If a NotifyGrab is to be sent ignore it. If a NotifyUngrab
enter is sent, only adjust the semaphore if it is on 0. Likewise, do the same
for a NotifyUngrab leave if the semaphore is on 1. This seems to work alright
so far.
We free the ValuatorClassRec quite regularly. If a SIGIO is handled while
we're swapping device classes, we can bring the server down when we try to
access lastx/lasty of the master device.
XkbInitKeyboardDefviceStruct may call FatalError if it fails. FatalError then
cleans up all the devices, resulting in a segfault if the pointer is
uninitialised.
Old code was fundamentally broken, fixes now are:
- free the MDs current device classes
- copy the device classes instead of flipping the pointers
- check for the old MD, not the new one.
Anything in dev->key, dev->valuator etc. of a MD must always be a copy of the
original class. The intial classes of an MD (the ones set up before an SD is
attached) as well, as we may have to restore them if no SD is attached
anymore.
Turns out it's really really hard synchronising device state across multiple
duplicated events if they all share the same struct. So instead of doing so,
when the SD changes deep-copy all it's classes into the MD. The MD then has
the same capabilities, but the state can be set separately. This should fix
xkb, key state, repeat etc. problems.
Updating the device state allows us to remove the SwitchCoreKeyboard from the
event gathering, it's all done during event processing now.
If a slave device is attached to a master device, then we need to send a
mapping notify to the client.
Mapping notify needs to be sent if
- different slave device but on same master
- different master
This gives you funny behaviour with the ClientPointer. When a
MappingNotify is sent to the client, the client usually responds with a
GetKeyboardMapping. This will retrieve the ClientPointer's keyboard mapping,
regardless of which keyboard sent the last mapping notify request. So
depending on the CP setting, your keyboard may change layout in each app...
This can happen if we check for a passive core grab and our device is a
floating slave device. Doesn't really change anything as SDs can't send core
events but it stops the server from segfaulting.
Each time a different slave device sends through a master, an
DeviceClassesChangedEvent is enqueued. When this event is processed, all
classes of the matching master device are changed, and the event is sent to
the clients.
Next time the master is queried, it thus shows the evclasses of the last slave
device. The original classes are stored in the devPrivates.
TODO: if all slave devices are removed, the master's original classes need to
be restored.
For pointers: don't try to set master->valuator fields if there is no master.
For keyboards: check if device is valid before trying to access the fields in
miPointerGetScreen (btw. this disables DGA events for floating keyboards).
Also stop the hideous number of ErrorFs if we request the paired device for a
floating dev.
XkbRemoveResourceClient wants to access xkbInfo if it exists, so make
sure we NULL it after freeing it. It doesn't make much sense to move
the RemoveResourceClient call first, as there's not much point in
notifying clients while we're shutting the server down anyway.
Subject: [PATCH] fix some performance gaps in Xace
The XaceHook function is used in several hotpaths.
The problem with it (performance wise) is twofold:
* The XaceHook function has a big switch() statement for the hook number in it
* The XaceHook function uses varargs to reassemble the final dispatch arguments again
Both are expensive operations... for something that is known at compile time
This patch turns the hotpath XaceHook call into a direct call to avoid
the switch and varargs; this gives me over 10% performance gain
on the x11perf benchmark.
These hints allow an acceleration architecture to optimize allocation of certain
types of pixmaps, such as pixmaps that will serve as backing pixmaps for
redirected windows.
If we inherited a signal mask from the parent process that ignores SIGUSR1,
then we will send SIGUSR1 to the parent to indicate when we're ready to
accept connections. Unfortunately, we send this notification way too
early, right after creating the sockets rather than just before entering
the main loop.
Move it to just before Dispatch() so we're not lying quite so much.
FixKeyState needs to be able to handle XI events, otherwise we get "impossible
keyboard events" on server zaps and other special key combos.
(cherry picked from commit 5ee409794e)
the hook - the hook only needs the Atom to control access to the selection
object. Upgraded the SelectionCallback to take a client argument and
additional type codes so that it can be used for redirection.
Floating devices get sprites, but still aren't spriteOwners. This prevents
them from getting rendered, and also stops segfaulting.
(not really solving the problems with keyboards though)
Set isMaster for VCP/VCK.
Init sprites for master pointer devices.
Pair master kbds with master pointers (1:1 pairing!).
Attach other devices to VCP/VCK.
For now, we don't allow attaching slaves to other slaves, and we don't allow
pairing slaves with other slaves.
Pairing is for master keyboard->master pointer only.
Attaching is for slave device->master device only.
We re-pair them with the VCP, not a real device! If we would do otherwise,
somebody may change our keyboard focus and thus get us typing where we don't
want to type.
If the pairing client is not set, then the pairing is initiated internally
(e.g. when a new keyboard device is configured). In this case we _must_ pair
regardless of who is the pairing client.
In some cases a button press may activate a passive core grab. If the client
owning the passive grab already has a core grab on another device, don't
actually activate it. Otherwise the client gets two simultaneous passive
core grabs, and may never ungrab the device again (only if the other grab uses
GrabModeSync).
Reproducable: fire up gnome-session, open up gnome-terminal. Click with the
ClientPointer onto the window decoration, then click with another pointer onto
an application icon in the panel. Drag the icon out, release the button and
voila - you just lost your second mouse.
This is a half-assed attempt at getting rid of some enter-leave problems. When
a grab is activated, the events didn't get sent before, leading to interesting
results. This commit papers over it but doesn't actually fix it properly. The
whole enter/leave (focusin/out) structure needs to be ripped out and changed
for multiple devices.
Unfortunately, more information is needed to properly label the device.
This will come from the configuration file, the hotplug messages, etc.
It will either have to be passed into this function,
or this hook moved down into the callers.
* dix/events.c, include/dix.h:
(UpdateSpriteForScreen): added this to update the mouse sprite context
when we switch from a pScreen to another.
* mi/mipointer.c:
(miPointerWarpCursor): as we are switching to a new pScreen,
don't forget to update the mouse sprite context.
Removes "LookupKeyboardDevice" and "LookupPointerDevice" in favor of
inputInfo.keyboard and inputInfo.pointer, respectively; all use cases
are non-XI compliant anyway.
Let the drivers only generate XI events and put those into the event queue.
When processing events, generate core events as needed. This fixes a number of
problems with XKB and the DIX in general.
The previous approach was to put core events and XI events as separate events
into the event queue. When being processed, the server had no knowledge of
them coming from the same device state change. Anything that would then change
the state of the device accordingly was in danger of changing it twice,
leading to some funny (i.e. not funny at all) results.
Emulating core events while processing XI events fixes this, there is only one
path that actually changes the device state now. Although we have to be
careful when replaying events from synced devices, otherwise we may lose
events.
Note: XI has precedence over core for passive grabs, but core events are
delivered to the client first.
This removes the wrapping added in 340911d724
We need it unconditionally in a few places, and the rest checked for NULL and
then set it to VCK anyway. So, fixing up all callers to appreciate the defined
return value.
GenericEvents can't be parsed to keyButtonPointer, and there's no guarantee
that it has a time field anyway. PlayReleasedEvent needs to store the millis
when we know it (core events, XI event) and just re-use them for GenericEvents.
Yes, this is a hack. But it looks like the time has zero significance anyway.
This was an attempt to avoid scratch gc creation and validation for paintwin
because that was expensive. This is not the case in current servers, and the
danger of failure to implement it correctly (as seen in all previous
implementations) is high enough to justify removing it. No performance
difference detected with x11perf -create -move -resize -circulate on Xvfb.
Leave the screen hooks for PaintWindow* in for now to avoid ABI change.
EnableDevices is (amongst others )called after a VT switch. We must not create
a new sprite or re-pair the device, otherwise we lose the input device setup
that we had before the VT switch.
This requires the devices to be in exactly the same order as before
the VT switch. Removing a device while on a different VT is probably a bad
idea.
The device state needs to be changed while processing the XI event. Core
events are always processed after XI, so by then the device is already set up
properly. However, we now rely on DeviceButtonMotionMask to be equal to
ButtonMotionMask. It already is, but stick a big fat warning in so nobody
attempts to change it.
This commit disables XKB for the VCK, thus essentially for all devices.
Temporarily anyway.
Add keyc->postdown, which represents the key state as of the last mieqEnqueue
call, and use it when we need to know the posted state, instead of the
processed state (keyc->down). Add small functions to getevents.c to query and
modify key state in postdown and use them all through, eliminating previously
broken uses.
Previously, the server version reported by xdpyinfo and Xorg -version would
bear some vague resemblance to a X.Org katamari version, but in the presence
of modularization (and client-server relationships with different katamari
versions on each side) those numbers don't really make sense. Instead, just
report the package version.
When branching a stable branch, master's version should be immediately updated
to the endpoint of the stable branch plus a snapshot of 1 (for example,
1.4.0.1 after server-1.4-branch). The stable branch should then be changed to
RC0 at that time (1.3.99.0, for example).
This scheme was partially attempted for server 1.3, but lacked the appropriate
master updates, thus why it had to be revisited now. While here, we can also
remove a lot of versioning complexity since everything is based on the package
version.
This reverts commit 6b055e5d97.
MPX relies on the XI event being delivered before the core event. Device grabs
break, amongst other things. I guess stuck modifiers need to be fixed some
other way.
Conflicts:
dix/getevents.c
delivery of events to windows and clients.
This is tentative. It's likely that an additional last-resort hook will
be necessary for code that calls TryClientEvents or WriteEventsToClient
directly. It's also possible that new xace machinery will be necessary
to classify events and pull useful resource ID's out of them.
The failure case also needs some thinking through. Should event delivery
"succeed" or should it report undeliverable?
Finally, XKB appears to call WriteToClient to pass events. Sigh.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
Composite's automatic redirection is a more general mechanism than the
ad-hoc BS machinery, so it's much prettier to implement the one in terms
of the other. Composite now wraps ChangeWindowAttributes and activates
automatic redirection for windows with backing store requested. The old
backing store infrastructure is completely gutted: ABI-visible structures
retain the function pointers, but they never get called, and all the
open-coded conditionals throughout the DIX layer to implement BS are gone.
Note that this is still not a strictly complete implementation of backing
store, since Composite will throw the bits away on unmap and therefore
WhenMapped and Always hints are equivalent.
We shouldn't be able to restrict events like Expose, etc. with device based
ACLs. So we just ignore all non-input events when checking for permissions.
A passive core grab doesn't specify the device, and is thus created with the
ClientPointer as device. When this grab is activated later, don't actually
activate the grab on the grab device, but rather change the device to the one
that caused the grab to activate. Same procedure for keyboards.
Makes core apps _A LOT_ more useable and reduces the need to set the
ClientPointer.
Only applies to core grabs!
Disclaimer: It's 6:51am. I'm trying to be as understandable as possible.
What was happening previously was this:
* Press Alt
* Extended event generated and processed: state is now Alt down once
* Core event generated
- keyboard switched: inherited state is Alt down once
- event processed: Alt down twice
* Release Alt
* Extended event generated and processed: state is now null
* Core event generated and processed: Alt down once
If we switch the order:
* Press Alt
* Core event generated:
- keyboard switched: inherited state is null
- event processed: Alt down once
* Extended event generated and processed: state is now Alt down once
* Release Alt
* Core event generated and processed: state is now null
* Extended event generated and processed: state is now null
When we carry over the previous state, it needs to be the _previous_ state
(state and modifiersPerKey), assuming that we're going to catch now-core
events for any of these. For example, if Ctrl is held down as we pivot, we
need to carry Ctrl over with a count of one, for which an extended + core
release will then clear. Carrying over the union of the previous state _and
the state resulting from the immediate action_ was what broke things.
Add support for HAL-based hotplugging, in which we just get the list of
input devices and properties from HAL. Requires an FDI which is not yet
in mainline HAL.
For some reason, my keyboard has 25 mouse buttons, but zero valuators. This
causes GPE to blow up spectacularly, trying to get (and set) co-ordinates from
devices without valuators. For now, just prevent this from ever happening,
and whack a dirty great FIXME in.
Make sure the font path is always 'built-ins' when we use built-in fonts,
rather than having it as a fixed path for a while, then clobbering it
halfway through startup.
Break up D-Bus into two components: a D-Bus core that can be used by any
part of the server (for the moment, just the D-Bus hotplug API, and the
forthcoming HAL hotplug API), and the old D-Bus hotplug API.
We need to do this to update the sprites x/y coordinate before we assemble a
button event. Absolute devices may send a buttonEvent with valuators attached.
If we don't update the sprite before assembling the event, the valuators are
lost and the button press is delivered to the previous position of the device.
Doesn't have any effect on relative devices.
This patch changes the semantics of manual redirect windows so that they no
longer affect the clip list of their parent. Doing this means the parent can
draw to the area covered by the child without using IncludeInferiors. More
importantly, this also means that the parent receives expose events when
that region is damaged by other actions.
We need this to allow extensions to fill in extra data for an event before it
is sent to the client. This is probably to be used like
FillUpEventsFromWindow().
DeletePassiveGrabFromList() may remove the window optional, so we need to
re-alloc it if it isn't there anymore.
Thanks to Colin Harrison for spotting the bug.
This is definitely necessary in CheckDeviceGrabAndHintWindow (thanks to Paulo
Zanoni for spotting it). We're resetting it everywhere else too, just to be
save.
Device drivers flush their buttons on device init and cause a button down
event to be generated. If we unconditionally decrease the buttons, we won't be
able to ever get a passive device grab.
Format documentation for CheckDeviceGrabs to make it readable.
(cherry picked from commit 3e894974cd)
Conflicts:
Xi/exevents.c
Is set when passive grab is implicit as result of a ButtonPress event. If this
is the case, we need to store the XI mask as well as the core mask to ensure
delivery of XI events during the grab's lifetime.
Remove all core grabs on other devices when client issues a GrabPointer or
GrabKeyboard request. Let's assume that the client really only wants one
device to interact, so this seems like a reasonable solution.
Device drivers flush their buttons on device init and cause a button down
event to be generated. If we unconditionally decrease the buttons, we won't be
able to ever get a passive device grab.
Format documentation for CheckDeviceGrabs to make it readable.
Before you complain, this code hasn't seen material change since at least
X11R6. It certainly does not build with any modern version of Kerberos.
Anybody wanting krb5 auth to their X server should probably be using
GSSAPI instead of internal krb5 API anyway.
This quickfixes event delivery problems with XI events when a grab was on.
deviceMask is only used when the grab was from a ButtonPress to preserve
potential XI event masks.
This is not an ideal solution but it works until I have time to work on
PassiveGrabs.
Add XGE handling in DeliverGrabbedEvent.
We can now grab something selecting XGE events, but the current code is a
bit messy and doesn't work too well yet.
Add RawDeviceEvent (pointers only for now).
This commit changes the event queue to use EventLists instead of xEvent
arrays. Only EQ is affected, event delivery still uses xEvent* (look for
comment in mieqProcessInputEvent).
RawDeviceEvents deliver driver information to the client, without clipping or
acceleration.
If we don't do this, a device that is paired before a sprite has been
initialized for the paired device will not actually get the right sprite and
segfault the server on focus events. Happens for the VCK.
Both VCP and VCK are not in the inputInfo.devices list anymore, so we need to
check them separately. If we don't do this, we end up re-using ids 0 and 1,
causing all sorts of grief for clients.
This adds (unconditional) support for the GE extension. Anything from now on
that sends events in MPX will have to use the GE extension. No GE, no MPX
events. GE is not actually used yet from anywhere with this commit.
You will need to update x11proto, xextproto, libX11, libXext and xcb to the
matching xge branches. Things will _NOT_ work without the updated protocol
headers and libraries.
Requires moving the spriteTrace into the DeviceIntRec and adjusting a few
functions to take in device argument, most notably XYToWindow().
Cursor rendering on the second screen is busted.
arbitrary X status codes instead of just TRUE/FALSE.
The dix layer in most cases still does not propagate the return value of
XACE hooks back to the client, however. There is more error propagation
work to do.
Core enter/leave events with detail Notify{Ancestor|Inferior|Nonlinear} are
only sent for the first/last pointer to enter/leave. Events with detail
Notify{Nonlinear}Virtual are sent at all times, but not to those windows that
currently have one or more pointers inside their boundaries.
Send EnterNotify when first device enters the window, LeaveNotify when the
last device leaves the window. Additional devices will not cause additional
Enter/LeaveNotifies.
Make core events carry the same modifier state as the extended events, so
that holding down Ctrl on keyboard A and pressing Q on keyboard B won't
cause your app to quit.
Improve memory usage by allocating the sprite's memory only to devices that
actually have a sprite and provide means to remove a device's cursor from the
screen (more hotplugging, yay!).
This commit breaks ScreenRec's ABI.
Calloc cursor struct to ensure devPrivates are zeroed out and don't
increase the refcnt for devices automatically when allocating a new
cursor. Use new DeviceIsPointerType() to detect if device is a pointer
_before_ device has been activated and can thus be identified and set
up grab functions accordingly. This way we can increase the refcnt
when we get a pointer grab.
This commit introduces a memory leak, as the refcnt never seems to get
down to 0 and thus cursors will not be freed. Solves the problems with
GNOME segfaulting every 30 seconds though.
The former <X11/extensions/XKBsrv.h> has been pulled into the server now as
include/xkbsrv.h, and the world updated to look for it in the new place,
since it made no sense to define server API in an extension header. Any
further work along this line will need to do similar things with XKBgeom.h
and friends.
EnableDevice.
zero out spriteTrace, otherwise GetCurrentRootWindow() may return
invalid data.
Evdev adds previously hotplugged devices on its own when rescanning,
and ActivateDevice does not get called for those devices. Sprites need
to be initialized or paired before the device gets started, so the
safest place to do so is EnableDevice (which actually does get called
by the evdev driver).
dix: IsPointerDevice and IsKeyboardDevice, use same ways to identify type
of device as XI does for the XListInputDevices reply.
Autopair each non-pointer device with VCP when activating, pair with
real device after activation.
Don't return non-keyboard devices when calling GetPairedKeyboard or
PickKeyboard, otherwise we segfault for 'evdev brain'.
state field in the event, rather than using the virtual devices.
ProcessPointerEvent: name argument "device" instead of "other".
Add GetPairedKeyboard().