Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It relies on GBM >= 17.1.0 where we can import BO with multiple
planes and a format modifier (GBM_BO_IMPORT_FD_MODIFIER).
v2: Properly free fds in Xwayland
[Also add glamor_egl_ext.h to Makefile.am for distcheck's sake - ajax]
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The extensions listed have not been needed in a while. Replace with the
only remaining requirement.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
All that was left here was updating the FBO's size. However, the FBO
size was always set correctly already through
glamor_set_pixmap_texture() from whoever had attached a new BO to the
pixmap.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The function hasn't been doing anything useful since keithp's resource
freeing fixes in 2014.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Add glamor_shareable_fd_from_pixmap function to get dma-buf fds suitable
for sharing across GPUs (not using GPU specific tiling).
This is necessary for the modesetting driver to correctly implement
the DRI2 SharePixmapBacking callback.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Some drivers are calling glFinish, they really should be doing this.
This also is needed for some reverse prime scenarios.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Glamor works out from the profile if it is
core.
This flag is used to disable quads for rendering.
v1.1: split long line + make whitespace conform (Michel)
v1.2: add GL 3.1 version defines
v2: move to having glamor work out the profile.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
If a pixmap isn't getting exported as a dmabuf, then we don't need to
make an EGLImage/GBM bo for it. This should reduce normal pixmap
allocation overhead, and also lets the driver choose non-scanout
formats which may be much higher performance.
On Raspberry Pi, where scanout isn't usable as a texture source, this
improves x11perf -copypixwin100 from about 4300/sec to 5780/sec under
xcompmgr -a, because we no longer need to upload our x11perf window to
a tiled temporary in order to render it to the screen.
v2: Just use pixmap->usage_hint instead of a new field. Drop the
changes that started storing gbm_bos in the pixmap priv due to
lifetime issues.
v3: Fix a missing gbm_bo_destroy() on the pixmap-from-fd success path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
I think void * was just used to avoid needing to #include gbm.h, but
we can just forward-declare the structs and be fine.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
One less layering violation (EGL should call glamor, if anything, not
the other way around).
v2: Move glamor.c's DestroyPixmap wrapping up above the
glamor_egl_screen_init() call, since glamor.c's DestroyPixmap
needs to be the bottom of the stack (it calls fb directly and
doesn't wrap). Caught by Michel.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The DestroyPixmap chain and CloseScreen chain all do pixmap teardown
already, and calling it manually would be redundant.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This avoids a lot of screwing around to attach our privates later. It
means that non-glamor pixmaps now gain 120 bytes of glamor privates on
64-bit (which has quite a bit of fixable bloat), and glamor pixmaps
take one less pointer of storage (not counting malloc overhead).
Note that privates start out zero-filled, which matches the callocs we
were doing when making our own privates, and in the case of an fb
pixmap that has a priv where it didn't before, the type ends up being
GLAMOR_MEMORY as we would want.
v2: Clarify that the GLAMOR_MEMORY enum must be 0 (as it was
previosuly), so that the new pixmap private behavior is as
expected. Suggested by keithp.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> (v1)
Reviewed-by: Keith Packard <keithp@keithp.com>
Rather than create the pixmap, this uses the file descriptor
to change an existing pixmaps backing store.
This is required for reverse prime slaves, where we create
the slave pixmap, then set the backing store.
v1.1: use local pScreen (Eric)
Reviewed-by: Eric Anholt <eric@annholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need this for doing USB offload scenarios using glamor
and modesetting driver.
unfortunately only gbm in mesa 10.6 has support for the
linear API.
v1.1: fix bad define
v2: update the configure.ac test as per amdgpu. (Michel)
set linear bos to external to avoid cache. (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
New composite glyphs code uses the updated glamor program
infrastructure to create efficient shaders for drawing render text.
Glyphs are cached in two atlases (one 8-bit, one 32-bit) in a simple
linear fashion. When the atlas fills, it is discarded and a new one
constructed.
v2: Eric Anholt changed the non-GLSL 130 path to use quads instead of
two triangles for a significant performance improvement on hardware
with quads. Someone can fix the GLES quads emulation if they want to
make it faster there.
v3: Eric found more dead code to delete
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Initialize full pixmap private for all pixmaps, including block
dimensions and counts so that no checks are needed when walking the
fbos.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is not used anywhere
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This was only used to signal when we couldn't ask the DDX to draw to a
pixmap; now that we have no DDX-based fallbacks, we don't need to have
this type.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
These were used by the non-standard glamor implementation in the intel
driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Remove these defines as we start to remove support for non-standard
glamor layering as used by the intel driver.
v2: Rebase on the blockhandler change and the Xephyr init failure
change (by anholt), fix stray NO_DRI3 addition to xwayland.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
GLAMOR_MEMORY_MAP was only used with GLAMOR_CREATE_PIXMAP_MAP, and
GLAMOR_CREATE_PIXMAP_MAP doesn't appear to be used anywhere, so just
remove both of them.
v2: Fix a stray whitespace bug that was introduced (change by anholt).
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
(Originally written by Dave Airlie; split into a separate patch by
Kenneth Graunke.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
They are part of the ABI.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were three paths that called eglDestroyImageKHR:
* The front buffer
* The intel driver's flip buffer
* pixmaps under DRI3
This patch unifies the second two by having glamor_destroy_pixmap
always destroy any associaged EGL image. This allows us to stop
storing the back_pixmap pointer in glamor as that was only used to
make sure that buffer was freed at server reset time.
v2: check for valid pixmap_priv before using it in
glamor_egl_destroy_pixmap_image
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
All users of glamor had the same value set, and it complicated things
for no reason.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This makes sure the pixelization for dashed lines matches non-dashed
lines, while also speeding them up.
v2: Switch to glamor_make_current
v3: Create dash pattern pixmap without GLAMOR_CREATE_FBO_NO_FBO
v4: Adopt suggestions from Eric's review:
- Drops power-of-two alignment of our line vertex data, simplifying
the code.
- Stops reading from the VBO. While on keithp's and my machines the
VBO is mapped cached, on many implementations it will be mapped WC,
making those reads extremely expensive.
- Style fixes (line wrapping, spaces around operators).
v5: Adopt suggestions from Markus' review:
- Use max when computing zero-width dashed line length.
Don't open code max here.
- Embed CoordModePrevious into VBO writing for dashed lines
Instead of pre-computing the coord mode previous results, just
embed this in the loop which fills the vertex buffer. Saves
re-writing the request buffer, and shortens the code a bit
v6: Export glamor_destroy_gc for UXA
UXA needs to call glamor_destroy_gc from its GCFuncs, so export
it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Paints with textures, using a temporary buffer for overlapping copies
Performs CPU to GPU transfers for pixmaps in memory. Accelerates copy
plane when both objects are in the GPU. Includes copy_window
acceleration too.
v2: Use NV_texture_barrier for non-overlapping copies within the same
drawable
v3: Switch to glamor_make_current
v4: Do overlap check on the bounding box of the region rather than
on individual boxes
v5: Use Eric Anholt's re-written comments which provide a more accurate
description of the code
v6: Use floating point uniform for copy plane bit multiplier. This
avoids an int to float conversion in the copy plane fragment shader.
Use round() instead of adding 0.5 in copy plane. round() and +0.5
end up generating equivalent code, and performance measurements
confirm that they are the same speed. Round() is a bit clearer
though, so we'll use it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Because uxa doesn't just use glamor directly, it keeps these two
functions from being wrapped so that they get called
automatically. Publishing these will allow uxa to call them directly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Accelerates text painting with GPU-based geometry computation and stippling
v2: Simplify get_glyphs, expand single character variable names to
more descriptive ones. (Markus Wick)
v3: Rebase against the glamor_prepare_* un-renaming (changes by anholt).
Improves x11perf -f8text by 417.908% +/- 11.0144% (n=10)
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
There was a spurious declaratoin in glamor.h for glamor_poly_line_nf
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
When we create a glamor pixmap by calling glamor_create_pixmap()
directly, we need to call glamor_destroy_pixmap() to destroy it.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This flag lets a DDX allocate a glamor pixmap without allocating the
texture that backs it. The DDX can then allocate the texture itself
and then set it later.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
A DDX that implements the glamor EGL functions need to pull in this
prototype but shouldn't need to pull in glamor_priv.h
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Glamor has a mode where pixmaps will be constructed from numerous
small FBOs. This allows testing of the tiled pixmap code without
needing to create huge pixmaps.
However, the render glyph code assumed that it could create a pixmap
large enough for the glyph atlas. Instead of attempting to fix that
(which would be disruptive and not helpful), I've added a new pixmap
creation usage, GLAMOR_CREATE_NO_LARGE which forces allocation of a
single large FBO.
Now that we have pixmaps with varying FBO sizes, I then went around
and fixed the few places using the global FBO max size and replaced
that with the per-pixmap FBO tiling sizes, which were already present
in each large pixmap.
Xephyr has been changed to pass GLAMOR_CREATE_NO_LARGE when it creates
the screen pixmap as it doesn't want to deal with tiling either.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Just like for a caller of glamor_dri3_fd_from_pixmap(), otherwise the
consumer of that named buffer has no idea what GL chose for the
stride.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
The flag is already being set at glamor_egl_screen_init() time, so no
need for the driver to separately call this. That said, leave the
function around to keep the ABI compatibility.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
This hasn't actually been a problem, since the server hasn't allocated
any glyphs before our glyph private initialization during
CreateScreenResources. But it's generally not X Server style to do
things this way.
Now that glamor itself drives both parts of glyphs setup, DDX drivers
no longer need to tell glamor to initialize glyphs. We do retain the
old public symbol so they can keep running with no changes.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
We should be uploading any vertex data using this kind of upload
style, since it saves a bunch of extra copies of our vertex data.
v2:
- Add a simple comment about what the function does.
- Use get_vbo_space()'s return in trapezoids, instead of dereffing
glamor_priv->vb (by Markus Wick).
- Fix the double-unmapping by moving put_vbo_space() outside of
flush_composite_rects().
- Remove the rest of the composite_vbo_offset usage, and just always
use get_vbo_space()'s return value.
v3:
- Fix failure to put_vbo_space in traps when no prims were
generated.
- Unbind the VBO from put_vbo_space(). Keeps callers from
forgetting to do so.
v4:
- Split out some changes into the previous 3 commits while trying to
track down a regression.
- Fix regression due to rebase fail where glamor_priv->vbo_offset
wasn't incremented.
v5:
- Fix GLES2 VBO sizing.
- Add a comment about resize behavior.
- Move glamor_vbo.c init code to glamor_vbo.c from
glamor_render.c. (Derived from Markus's changes, but the GLES2 fix
dropped almost all of the code in the functions).
v6:
- Drop the initial BufferData on GLES2 (it happens at put() time).
- Don't forget to set vbo_offset to the size on GLES2.
- Use char * instead of void * in the cast to return the vbo_offset.
- Resize the default FBO to 512kb, to be similar to previous
behavior. +1.66124% +/- 0.284223% (n=679) on aa10text.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
The render-nodes case is untested.
v2: Add a flag for wayland to suppress the native DRI3 support.
Wayland isn't running as a master itself, so it can't do the auth
on its own and has to ask the compositor to do it for us. Dropped
XXX about randr provider -- the conclusion from discussion with
keithp was that if the driver's dri3_open for a provider on a
different screen, that's a core dri3 bug.
v3: Don't put quite so much under GLAMOR_NO_DRI3, and add a comment
explaining what this is about.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There was confusion over whether they should have egl in the name, and
they had DRI3 in the name even though they're useful to have without
DRI3.
v2: Just rename glamor_name_from_pixmap for now -- I'd accidentally
conflict-resolved in adding new parameters from a later commit.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Porting this code to be non-xorg-dependent is going to take
significant hacking, so just dump it in the glamoregl module for the
moment, so I can hack on it while regression testing.
v2: Fix compiler warnings by adding #include dix-config.h at the top,
don't try to auto-init (I'll try to fix the xv ABI later).
v3: Fix last minute breakage of having reintroduced xf86ScrnToScreen
(one of the compat macros). Just use the drawable's pScreen instead.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: Avoid making the Ximage for the screen that we'll never use, and
drive the screen pixmap creation for glamor ourselves.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com>
The GLX side just gets the context from the current state. That's
also something I want to do for EGL, so that the making a context is
separate from initializing glamor, but I think I need the modesetting
driver in the server before I think about hacking on that more.
The previous code was rather incestuous, along with pulling in xf86
dependencies to our dix code. The new code just initializes itself
from the current state.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
We're going to want to make this DIX code instead of XF86 if at all
possible, but for now just disable it so we can work on the rest of
the build.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
