This existed to be passed to the bs recovery routine; since we back all
planes, we don't care.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Otherwise the CPU may end up reading from non-cacheable memory, which is
very slow.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84178
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Markus Wick <markus@selfnet.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
==9530== 808,575,600 bytes in 5,904 blocks are definitely lost in loss record 4,602 of 4,602
==9530== at 0x4C28C20: malloc (vg_replace_malloc.c:296)
==9530== by 0xAD29C98: _glamor_upload_bits_to_pixmap_texture (glamor_pixmap.c:771)
==9530== by 0xAD2AE95: glamor_upload_sub_pixmap_to_texture (glamor_pixmap.c:1031)
==9530== by 0xAD2BD55: glamor_upload_pixmap_to_texture (glamor_pixmap.c:1057)
==9530== by 0xAD1C2E6: glamor_composite_choose_shader (glamor_render.c:1025)
==9530== by 0xAD1C629: glamor_composite_with_shader (glamor_render.c:1174)
==9530== by 0xAD1DA77: glamor_composite_clipped_region (glamor_render.c:1542)
==9530== by 0xAD1E849: _glamor_composite (glamor_render.c:1689)
==9530== by 0xAD1ED90: glamor_composite (glamor_render.c:1758)
==9530== by 0x519FD6: damageComposite (damage.c:502)
==9530== by 0xAD27AA3: glamor_trapezoids (glamor_trapezoid.c:147)
==9530== by 0xAD27B51: glamor_trapezoids (glamor_trapezoid.c:101)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84176
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
I can't find any performance benefit to using the GL path and the code
renders this trapezoid incorrectly:
top: FIXED 29.50
bottom: FIXED 30.00
left top: POINT 0.00, 29.50
left bottom: POINT 0.00, 30.50
right top: POINT -127.50, 29.50
right bottom: POINT 52.50, 30.00
This should render a solid line from 0,30 to 52,30 but draws nothing.
The code also uses an area computation for trapezoid coverage which
does not conform to the Render specification which requires a specific
point sampling technique.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This enables the assertion that all users of the large pixmap member
are restricted to pixmaps which are actually large.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
glamor_composite_largepixmap_region is given the job of dealing with
compositing between a mixture of large and small pixmaps. However, it
was assuming that the destination pixmap was large and fetching
members of the large structure even for small pixmaps.
This manifested with assertion failures when compositing from a large
pixmap to a small pixmap.
Fixed by using the pixmap size for the destination block size for
small pixmaps.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
glamor_compute_clipped_regions_ext wants to treat small and large
pixmaps uniformly and did that by writing into the large pixmap
union member in small pixmaps to construct something that looks like a
one texture large pixmap.
Instead of doing that, simply allocate the necessary elements locally
on the stack and use them from there.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For now, this simply fetches the large member of the pixmap private.
It will be changed to assert that the pixmap is large once bugs
related to that have been fixed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is the last function-like macro in glamor_priv.h; change to
static inline like all of the other functions there.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It references a pixmap, which is a per-screen resource.
Fixes broken text rendering in xfwm4-tweak-settings in Zaphod mode.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is necessary because the glyph caches are per screen.
Fixes broken menu text in gnome-terminal in Zaphod mode.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
And rename the boolean to reflect what it's about.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The comment above glamor_glyphs_init was already saying so.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
It results in a crash.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The Xv StopVideo callback is not invoked on textured video ports, so
the temporary pixmaps allocated for the video planes are never freed.
Freeing the storage immediately after use is a simple solution to this
problem which doesn't appear to have any visible performance impact.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This happens to avoid GL errors on hardware without
EXT_texture_integer (which implies < GLSL 130, and thus glamor_text.c
programs not compiling anyway).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides a speedup e.g. when the destination is an SHM pixmap.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76285
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
A few files in the server are including xorg-server.h, which is only
for use by Xorg server drivers. This fixes those errors and then adds
a check to make sure it doesn't happen again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This uses a single large triangle and a scissor to draw the video
instead of two triangles.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
I intended to use glFlush all along, but somehow managed to type
glFinish instead. glFlush is sufficient (for a single-queue GPU) to
ensure serialization between queued rendering in the X server and
future rendering from the client.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This hooks up SHM sync fences to complete the requirements for DRI3
running on Glamor.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
It's unused since keithp's copy acceleration code completely replaced
glamor_copyarea.c and removed the blit path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Unused since the glamor_prepare.c replacement of glamor_finish_access().
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
All users of glamor had the same value set, and it complicated things
for no reason.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
After keithp's change to drop the old glamor_fill() code, nothing ever
changed these values.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
We're not drawing, and we're not initially setting up the texture for
later drawing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If this path needed the filters set, so would all the other
glDrawArrays() callers. But they don't.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
To understand this patch, let's start at the protocol interface where
the relationship between the coordinate spaces is documented:
static Bool
_glamor_composite(CARD8 op,
PicturePtr source,
PicturePtr mask,
PicturePtr dest,
INT16 x_source,
INT16 y_source,
INT16 x_mask,
INT16 y_mask,
INT16 x_dest, INT16 y_dest,
CARD16 width, CARD16 height, Bool fallback)
The coordinates are passed to this function directly off the wire and
are all relative to their respective drawables. For Windows, this means
that they are relative to the upper left corner of the window, in
whatever pixmap that window is getting drawn to.
_glamor_composite calls miComputeCompositeRegion to construct a clipped
region to actually render to. In reality, miComputeCompositeRegion clips
only to the destination these days; source clip region based clipping
would have to respect the transform, which isn't really possible. The
returned region is relative to the screen in which dest lives; offset by
dest->drawable.x and dest->drawable.y.
What is important to realize here is that, because of clipping, the
composite region may not have the same position within the destination
drawable as x_dest, y_dest. The protocol coordinates now exist solely to
'pin' the three objects together.
extents->x1,y1 Screen origin of clipped operation
width,height Extents of the clipped operation
x_dest,y_dest Unclipped destination-relative operation coordinate
x_source,y_source Unclipped source-relative operation coordinate
x_mask,y_mask Unclipped mask-relative operation coordinate
One thing we want to know is what the offset is from the original
operation origin to the clipped origin
Destination drawable relative coordinates of the clipped operation:
x_dest_clipped = extents->x1 - dest->drawable.x
y_dest_clipped = extents->y1 - dest->drawable.y
Offset from the original operation origin:
x_off_clipped = x_dest_clipped - x_dest
y_off_clipped = y_dest_clipped - y_dest
Source drawable relative coordinates of the clipped operation:
x_source_clipped = x_source + x_off_clipped;
y_source_clipped = y_source + y_off_clipped;
Mask drawable relative coordinates of the clipped operation:
x_mask_clipped = x_source + x_off_clipped;
y_mask_clipped = y_source + y_off_clipped;
This is where the original code fails -- it doesn't subtract the
destination drawable location when computing the distance that the
operation has been moved by clipping. Here's what it does when
constructing a temporary source picture:
temp_src =
glamor_convert_gradient_picture(screen, source,
extent->x1 + x_source - x_dest,
extent->y1 + y_source - y_dest,
width, height);
...
x_temp_src = -extent->x1 + x_dest;
y_temp_src = -extent->y1 + y_dest;
glamor_convert_gradient_picture needs source drawable relative
coordinates, but that is not what it's getting; it's getting
screen-relative coordinates for the destination, adjusted by the
distance between the provided source and destination operation
coordinates. We want x_source_clipped and y_source_clipped:
x_source_clipped = x_source + x_off_clipped
= x_source + x_dest_clipped - x_dest
= x_source + extents->x1 - dest->drawable.x - x_dest
x_temp_src/y_temp_src are supposed to be the coordinates of the original
operation translated to the temporary picture:
x_temp_src = x_source - x_source_clipped;
y_temp_src = y_source - y_source_clipped;
Note that x_source_clipped/y_source_clipped will never be less than
x_source/y_source because all we're doing is clipping. This means that
x_temp_src/y_temp_src will always be non-positive; the original source
coordinate can never be strictly *inside* the temporary image or we
could have made the temporary image smaller.
x_temp_src = x_source - x_source_clipped
= x_source - (x_source + x_off_clipped)
= -x_off_clipped
= x_dest - x_dest_clipped
= x_dest - (extents->x1 - dest->drawable.x)
Again, this is off by the destination origin within the screen
coordinate space.
The code should look like:
temp_src =
glamor_convert_gradient_picture(screen, source,
extent->x1 + x_source - x_dest - dest->pDrawable->x,
extent->y1 + y_source - y_dest - dest->pDrawable->y,
width, height);
x_temp_src = -extent->x1 + x_dest + dest->pDrawable->x;
y_temp_src = -extent->y1 + y_dest + dest->pDrawable->y;
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Markus Wick <markus@selfnet.de>
This reverts commit 4e9aabb6fc.
It broke kwin decorations with XRender compositing.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
We'd get a request for like 16 bytes, claim to have allocated
GLAMOR_VBO_SIZE, and then not reallocate when something a request
bigger than 16 came along. The intent was to always allocate at least
GLAMOR_VBO_SIZE.
Fixes segfaults with Xephyr -glamor_gles2 and running gnome-terminal.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The difference between the two is that XF86 has the clip helper that
lets you upload less data when rendering video that's clipped. I
don't think that's really worth the trouble, especially in a world of
compositors, so I've dropped it to get to shared code.
It turns out the clipping code was broken on xf86-video-intel anyway.
To reproduce, run without a compositor, and use another window to clip
the top half of your XV output on the glamor XV adaptor: the rendering
got confused about which half of the window was being drawn to.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
I want to expose this from Xephyr as well, both to be able to test XV
changes rapidly, and beause the XV passthrough to the host's overlay
really doesn't work out well when we glXSwapBuffers() over the
colorkey.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The core rendering paths all use the glamor_program fill functions now
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This provides glamor_solid_boxes and glamor_solid using regular GC
operations instead of calling directly to underlying rendering
functions. This will allow the old rendering code to be removed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This copies the stipple to a 8bpp pixmap and uses that to paint the
texture from.
v2: Create deep stipple pixmap without GLAMOR_CREATE_FBO_NO_FBO
v3: Fix stipple origin sign (matches tiles now). Track changes
to original stipple with damage. This isn't required by the
X spec, but java appears to depend on it, so we'll just do it.
When Glamor switches to 8bpp bitmaps, we'll be able to render
directly from them and not need this anymore.
v4: Review comments from Eric:
* Remove stray whitespace change
* Avoid "large" pixmap for stipple by using GLAMOR_CREATE_NO_LARGE
* Wrap to 80 columns
v5: Don't crash when stipple damage tracker is destroyed
The stipple damage tracker is automatically destroyed when the
associated stipple pixmap is destroyed. When this happens, just
clear the pointer from the GC rather than calling
glamor_invalidate_stipple; that function would call
DamageUnregister on the now invalid stipple damage pointer and
crash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This makes sure the pixelization for dashed lines matches non-dashed
lines, while also speeding them up.
v2: Switch to glamor_make_current
v3: Create dash pattern pixmap without GLAMOR_CREATE_FBO_NO_FBO
v4: Adopt suggestions from Eric's review:
- Drops power-of-two alignment of our line vertex data, simplifying
the code.
- Stops reading from the VBO. While on keithp's and my machines the
VBO is mapped cached, on many implementations it will be mapped WC,
making those reads extremely expensive.
- Style fixes (line wrapping, spaces around operators).
v5: Adopt suggestions from Markus' review:
- Use max when computing zero-width dashed line length.
Don't open code max here.
- Embed CoordModePrevious into VBO writing for dashed lines
Instead of pre-computing the coord mode previous results, just
embed this in the loop which fills the vertex buffer. Saves
re-writing the request buffer, and shortens the code a bit
v6: Export glamor_destroy_gc for UXA
UXA needs to call glamor_destroy_gc from its GCFuncs, so export
it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
GL lines are nearly X compliant; you just need to fill in the last
pixel when the client hasn't requested CapNotLast.
v2: switch to glamor_make_current
v3: use miPolylines instead of custom glamor fallback path. Wrap
code to 80 columns.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This uses the same shaders as glamor_poly_glyph_blt.
v2: Wrap some long lines (changes by anholt).
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Paints with textures, using a temporary buffer for overlapping copies
Performs CPU to GPU transfers for pixmaps in memory. Accelerates copy
plane when both objects are in the GPU. Includes copy_window
acceleration too.
v2: Use NV_texture_barrier for non-overlapping copies within the same
drawable
v3: Switch to glamor_make_current
v4: Do overlap check on the bounding box of the region rather than
on individual boxes
v5: Use Eric Anholt's re-written comments which provide a more accurate
description of the code
v6: Use floating point uniform for copy plane bit multiplier. This
avoids an int to float conversion in the copy plane fragment shader.
Use round() instead of adding 0.5 in copy plane. round() and +0.5
end up generating equivalent code, and performance measurements
confirm that they are the same speed. Round() is a bit clearer
though, so we'll use it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
There's no reason to use a pointer here, it just wastes time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
These offer a simpler and more efficient means for temporarily
transitioning to CPU-accessible memory for fallback implementations.
v2: Do not attempt fallbacks with GLAMOR_DRM_ONLY pixmaps
glamor cannot transfer pixels for GLAMOR_DRM_ONLY pixmaps using
glReadPixels and glTexSubImage2D, and so there's no way to perform
fallback operations with these pixmaps.
v3: Clear ->pbo field when deleting the PBO. Otherwise, we'd reuse
the old name next time we fall back on the pixmap, which would
potentially conflict with some other pixmap that genned a new
name, or just do a lazy allocation of the name (compat GL context,
like we currently use) or error out (core GL context, like we hope
to use some day). Also, style fixes. Changes by anholt, acked by
keithp.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
It turns out putimage doesn't use the GC tile or stipple anyway, so
there's no need to do this.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The max size of renderbuffers and texture often match by accident, but
as we always use textures, we should check for the right flag. Also
check for viewport size as this may be lower and we want to render to
almost every pixmap.
Signed-off-by: Markus Wick <markus@selfnet.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
