Now we start to enable glamor_composite on large pixmap.
We need to do a three layer clipping to split the dest/source/mask
to small pieces. This commit only support non-transformation and
repeat normal case.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Added infrastructure for largepixmap, this commit implemented:
1. Create/Destroy large pixmap.
2. Upload/Download large pixmap.
3. Implement basic repeat normal support.
3. tile/fill/copyarea large pixmap get supported.
The most complicated part glamor_composite still not implemented.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
This is the first commit to add support for large pixmap.
The large here means a pixmap is larger than the texutre's
size limitation thus can't fit into one single texutre.
The previous implementation will simply fallback to use a
in memory pixmap to contain the large pixmap which is
very slow in practice.
The basic idea here is to use an array of texture to hold
the large pixmap. And when we need to get a specific area
of the pixmap, we just need to compute/clip the correct
region and find the corresponding fbo.
We need to implement some auxiliary routines to clip every
rendering operations into small pieces which can fit into
one texture.
The complex part is the transformation/repeat/repeatReflect
and repeat pad and their comination. We will support all of
them step by step.
This commit just add some necessary data structure to represent
the large pixmap, and doesn't change any rendering process.
This commit doesn't add real large pixmap support.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
The x_source and y_source cause some problem in
gradient. The old way to handle it by recaulate P1 P2
to minus the x_source and y_source, but this causes
problem in radial shader. Now we modify the manner to
set the texture coordinates: (x_source, y_source) -->
(x_source + width, y_source + height) to handle all the
cases.
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
1. The vertical and horizontal judgement in linear
gradient have problem when p1 point and p2 point
distance is very small but the gradient pict have a
transform matrix which will convert the X Y coordinates
to small values. So the judgement is not suitable.
Because this judgement's purpose is to assure the
divisor not to be zero, so we simply it to enter
horizontal judgement when p1 and p2's Y is same.
Vertical case is deleted. 2. Delete the unused p1 p2
uniform variable.
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Some gradient set the stops at the same position, for
example: firstly 0.5 to red color and then set 0.5 to
blue. This kind of setting will cause the shader work
not correctly because the percentage caculating need to
use the stop[i] - stop[i-1] as dividend. The previous
patch we just kill some stop if the distance between
them is 0. But this cause the problem that the color
for next stop is wrong. We now modify to handle it in
the shader to avoid the 0 as dividend.
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
The macro like "#define LINEAR_SMALL_STOPS 6 + 2" causes
the problem. When use it to define like "GLfloat
stop_colors_st[LINEAR_SMALL_STOPS*4];" The array is
small than what we supposed it to be. Cause memory
corruption problem and cause the bug of render wrong
result. Fix it.
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
1. Extract the logic of gradient from the glamor_render.c
to the file glamor_gradient.c.
2. Modify the logic of gradient pixmap gl draw. Use the
logic like composite before, but the gradient always just
have one rect to render, so no need to set the VB and EB,
replace it with just call glDrawArrays. 3.Kill all the
warning in glamor_render.c
Reviewed-by: Zhigang Gong<zhigang.gong@linux.intel.com>
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Previous implementation set the whole fbo's width and height as the
viewpoint. This may increase the numerical error as we may only has
a partial region as the valid pixmap. So add a new marco
pixmap_priv_get_dest_scale to get proper scale factor for the
destination pixmap. For the source/mask pixmap, we still need to
consider the whole fbo's size.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Caching texture objects is not necessary based on previous testing.
To keep the code simple, we remove it.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
We miss the strict warning flags for a long time, now add it back.
This commit also fixed most of the warnings after enable the strict
flags.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As GLES2 doesn't support clamp to the border, we have to
handle it seprately from the normal case.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Almost all callers will check whether the regions is empty
before call to this internal API, but it seems the
glamor_composite_with_copy may call into here with a zero
nbox. A little weird, as the miComputeCompositeRegion return
a Non-NULL, but the region is empty.
Also remove a unecessary glflush.
So let's check it here.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Use partial texture as the pixmap for the transformation
source/mask may introduce extra errors. have to use
eaxct size.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Currently set it to 256MB. If cache pool watermark increases
to this value, then don't push any fbo to this pool, will purge
the fbo directly.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
It seems that mesa has bugs when uploading bitmap to texture.
We switch to convert bitmap to a8 format and then upload the
a8 texture.
Also added a helper routine to dump 1bpp pixmap.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
We should use difference calculation for these two repeat mode
when we are a sub region within one texture.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As EGL image/gbm only support ARGB8888 image, we don't support
other format. We may change the way to use gbm directly latter.
But now, we have to face this limitation, and thus if a client
create a 16bpp drawable, and call get texture from pixmap then
a copy to here may occur and thus we have to force retur a TRUE
without do nothing.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As PVR's GLES2 implementation doesn't support A8 texture as
rendering target, we disable it for now.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As PVR glsl compiler seems doesn't support external fragment
function, and fails at compile gradient shader. Disable it
for now. We may need to modify gradient shader to don't use
external function.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Fix the bug caused by gradient picture set the stops at
the same percentage. The (stops[i] - stops[i-1]) will
be used as divisor in the shader, which will cause
problem. We just keep the later one if stops[i] ==
stops[i-1].
Signed-off-by: Junyan He <junyan.he@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Fix the problem of memory leak in gradient pixmap
generating. The problem caused by we do not call
glDeleteShader when destroy a shader program. This patch
will split the gradient pixmap generating to three
category. If nstops < 6, we will use the no array version
of the shader, which has the best performance. Else if
nstops < 16, we use array version of the shader, which is
compiled and linked at screen init stage. Else if nstops >
16, we dynamically create a new shader program, and this
program will be cached until bigger nstops.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
This commit optimize two cases:
1. When the clip contains the whole area, we can directly upload
the texel data to the pixmap, and don't need to do one extra
clipped copy.
2. At fallback path, we don't read back the whole pixmap, just
need a sub region.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
There are two cases which we may use a wrong texture size.
1. A pixmap is modified by the client side after it created
it. Then the pixmap's width may mismatch the original fbo/tex's
size. Thus we need to check this condition when preparing
upload the pixmap.
2. We provide two API to download/upload sub region of a
textured pixmap. The caller may pass in a larger width then
the original pixmap's size, this may happen at putimage
and setspans. We need to validate the width and height
when do the downloading/uploading.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As miGetImage is very inefficient, we don't fallback to it.
If the format is not ZPixmap, we download the required sub-
region, and then call fbGetImage to do the conversion.
This way is much faster than previous.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
We have disabled this feature for a long time, and previous
testing shows that this(pending fill) will not bring observed
performance gain. Now remove it.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Currently, intel's mesa dri driver will not check pbo for
a TexSubImage2D. So we use glTexImage2D if we are a fully
updating.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As the pixmap may be attached to a picture, we need to use
glamor_upload_sub_pixmap to process it. glamor_copy_n_to_n
will not consider the picture case.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As a textured_drm pixmap has a drm bo attached to it, and
it's the DDX layer to set it stride value. In some case,
the stride value is not equal to PixmapBytePad(w, depth)
which is used within glamor.
Then if it is the case, we have two choice, one is to set
the GL_PACK_ROW_LENGTH/GL_UNPACK_ROW_LENGTH when we need
to download or upload the pixmap. The other option is to
change the pixmap's devKind to match the one glamor is using
when downloading the pixmap, and restore it to the drm stride
after uploading the pixmap.
We choose the 2nd option, as GLES doesn't support the first
method.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
If no clip set, we load the bits to the pixmap directly.
Otherwise, load the bits to a temporary pixmap and call
glamor_copy_area to do the clipped copy.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
If a pixmap doesn't have a private, then set its type to
GLAMOR_MEMORY, and thus it will get a valid private.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
We already adjust the stride of the pixmap, and keep the alignment
as 4 should be ok to let the GL/GLES match the stride.
Previous version has a unbalanced PACK ROW length seting, and is
buggy, now fixed it.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
For A1 to A8's conversion, the stride is different for the
source and destination. Previous implementation use the same
stride, and may allocate less memory than required. Thus may
crash the server when uploading a A1 pixmap. Now fix it.
Tested-by: Peng Li <peng.li@intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>