When the call to queue a vblank event fails, we need to clean up by
removing the user-space queue entry. That is indexed by the local
sequence number, not by the kernel vblank count. The call in this
case was just passing the wrong value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
With -Wformat-nonliteral and a debug build you'd get yelled at here:
../hw/xfree86/x86emu/x86emu/debug.h:188:9: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
To fix this, rewrite the printf code to actually use varargs and the
appropriate format attribute. All callers of DECODE_PRINTF() pass a
string with no % specifiers, so we pass that as the argument to
printf("%s"). For DECODE_PRINTF2() we just pass the args through.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Avoid adding a "standard" mode timing if we've already got a matching
detailed timing. To help with that, parse CEA blocks for detailed
timings before doing standard or established timings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Fix meson_option.txt to align with the check of the int10 option against
'disabled', not 'false' in hw/xfree/meson.build, to see if it shouldn't be
built at all.
This keeps everything consistent that 'false' always turns things off.
Not noticed before as options weren't validated against choices until meson
0.43
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
The install rule of Xorg.wrap is currently a dependency of the
install-data target instead of the install-exec target. The build also
uses install-exec-hook to change the ownership and set the SUID bit on
the Xorg.wrap binary. The problem is that install-exec-hook is only
ordered respective to the install-exec target, the rules of install-data
may or may not have been executed.
If install-exec-hook runs before the Xorg.wrap binary is in place,
a message similar to the following will be present in the build log:
chown: cannot access '/pkgdir/usr/lib/xorg-server/Xorg.wrap': No such file or directory
make[6]: [Makefile:1151: install-exec-hook] Error 1 (ignored)
All that needs to be done is to change the name of the program variable
to contain 'exec' for the install rule to depend on the install-exec
target.
Excerpt from the Automake manual, chapter 12.2 The Two Parts of Install:
"Any variable using a user-defined directory prefix with ‘exec’ in the
name (e.g., myexecbin_PROGRAMS) is installed by install-exec. All other
user-defined prefixes are installed by install-data."
https://bugs.freedesktop.org/show_bug.cgi?id=104419
Signed-off-by: Lukáš Krejčí <lskrejci@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the Wayland compositor notifies of a new keymap, for the first X11
client using the keyboard, the last slave keyboard used might still not
be set (i.e. “lastSlave” is still NULL).
As a result, the new keymap is not applied, and the first X11 window
will have the wrong keymap set initially.
Apply the new keymap to the master keyboard as long as there's one.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=791383
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The "done" label restores crtc-> {x,y,rotation,mode}, frees output_id.
Doing the calloc() before writing to those values frees us from
necessity to restore them if calloc fails, and allows to merge
"if (mode)" block.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Somehow I'd managed to write this with this dependency missing, so this only
works correctly when the generated files already exist and the correct
automatic dependencies generated, but fails on a clean build.
Including generated files with a .c extension into the sources for a target
causes meson to want to compile them (and it seems to be hard to say "make
the directory containing this generated file available to include").
So, change the extension of included generated C fragments to .ic
Update the autotools build to align.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
This no longer does anything useful.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This no longer does anything useful.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The only consumer of this is the Linux vm86 backend for int10 (which you
should not use), and there all it serves to do is make signals generated
by the vm86 task non-fatal. In practice this error appears never to
happen, and marching ahead with root privileges after arbitrary code has
raised a signal seems like a poor plan.
Remove the usage in the vm86 code, making this error fatal.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This was added in ~2004 for the sis driver, to detect whether it could
use SSE for memcpy. Charmingly, the code to check whether that feature
exists in the server is:
#if XORG_VERSION_CURRENT >= XORG_VERSION_NUMERIC(6,8,99,13,0)
#define SISCHECKOSSSE /* Automatic check OS for SSE; requires SigIll facility */
#endif
Which means it has never worked in any modular server release.
A less gross way to do this is to check for SSE support with getauxval()
or /proc/cpuinfo or similar. Since no driver is using the existing
intercept mechanism, drop it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Xwayland is a pretty standard Wayland client, we want to be able to
capture core dumps on crashes.
Yet using "-core" causes any FatalError() to generate a core dump,
meaning that we would get a core file for all Wayland server crashes,
which would generate a lot of false positives.
Instead of using FatalError() on Wayland socket errors, give up cleanly
to avoid dumping core files when "-core" is used.
See also: https://bugzilla.gnome.org/show_bug.cgi?id=790502
and: https://bugzilla.gnome.org/show_bug.cgi?id=789086
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The tablet/stylus interfaces reused xwl_seat->focus_window, which
would leave a somewhat inconsistent state of that variable for
wl_pointer purposes (basically, everything) if the pointer happened
to lay on the same surface than the stylus while proximity_out
happens.
We just want the stylus xwl_window to correctly determine we have
stylus focus, and to correctly translate surface-local coordinates
to root coordinates, this can be done using a different variable.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
From the bug: "What happens if bits->width is less than 8? :)"
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=103012
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Just never filled in, oops. Seems to have gone unnoticed because
normally glXQueryContext simply returns the values filled in by the
client library when the context was created. The only path by which you
normally get to a GLXQueryContext request is glXImportContext, and then
only if the context is already indirect.
However, that's a statement about Mesa's libGL (and anything else that
inherited that bit of the SGI SI more or less intact). Nothing prevents
a mischeivous client from issuing that request of a direct context, and
if they did we'd be in trouble because we never bothered to preserve the
associated fbconfig in the context state, so we'd crash looking up
GLX_VISUAL_ID_EXT. So let's fix that too.
v2: Fixed missing preservation of the config in DRI2 (Eric Anholt)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
CMAP_LOAD_EVEN_IF_OFFSCREEN has been encapsulated since the import of
xf86-video-modesetting into the tree.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
If drmModeGetConnector() fails in drmmode_output_detect(), we have to
reset the output_id to -1 too.
Yet another spot leading to a potential NULL dereference when handling
the mode_output member as output_id was != -1. Though, this case should
be very hard to hit.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Add a missing new-line character and make the message more verbose than
"Failed".
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Those warnings are generated, when building without systemd support:
../hw/xfree86/os-support/linux/lnx_platform.c: In function ‘get_drm_info’:
../hw/xfree86/os-support/linux/lnx_platform.c:29:16: warning: variable ‘minor’ set but not used [-Wunused-but-set-variable]
int major, minor, fd;
^~~~~
../hw/xfree86/os-support/linux/lnx_platform.c:29:9: warning: variable ‘major’ set but not used [-Wunused-but-set-variable]
int major, minor, fd;
^~~~~
In this case the functions are macros, which don't use theese arguments.
v2: Add comments, why the warnings appear. Suggested by Emil Velikov
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
GLES spells this extension as GL_OES_vertex_array_object, but it is
functionally equivalent to the GL_ARB version. Mesa has supported both
since 9.0, let's go ahead and require it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This header is a truly ancient remnant of the SGI SI code, which used
the same struct for visual/fbconfig state on both sides of the wire.
We're not using this struct ourselves so let's stop depending on the
header.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The CEA extension short video descriptors contain the VIC, which starts
at 1, not 0.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
It doesn't matter, none of this matters.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Roundhouse kick replacing the various (sizeof(foo)/sizeof(foo[0])) with
the ARRAY_SIZE macro from dix.h when possible. A semantic patch for
coccinelle has been used first. Additionally, a few macros have been
inlined as they had only one or two users.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If one misconfigures a ZaphodHeads value (more than 20 characters
without a delimiter), we get an overflow of our buffer. Use
xstrtokenize() instead of writing/fixing our own tokenizer.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Change 677c32bc refactored all usages of drmWaitVBlank() into a helper function,
ms_queue_vblank().
ms_queue_vblank() takes in an MS_QUEUE_RELATIVE flag to indicate that the
sequence number is relative rather than absolute, but still treats the actual
sequence number as absolute, passing it through ms_crtc_msc_to_kernel_msc()
unconditionally before calling drmWaitVBlank().
ms_crtc_msc_to_kernel_msc() works by subtracting a vblank offset from the
provided sequence number, which only makes sense for absolute sequence numbers.
In the case of PRIME Sync, drmmode_SharedPixmapPrsentOnVBlank() passes in 1,
which results in a large negative vblank offset. After subtracting, we're left
with a relative sequence number of 100,000+, i.e. wait for 100,000+ vblanks...
In the relative case we want to pass in the sequence number unmodified. Simply
add a check to do this.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Similar to change cba5a10f, xf86ScreenSetCursor() would dereference ScreenPriv
without NULL checking it. If Option "SWCursor" is specified, ScreenPriv == NULL.
Without this fix, it is observed that setting Option "SWCursor" "on" on the
modesetting driver in a PRIME configuration will segfault the server.
It is important to return success rather than failure in the instance that
ScreenPriv == NULL and pCurs == NullCursor, because otherwise xf86SetCursor()
can fall into infinite recursion: xf86SetCursor(pCurs) calls
xf86ScreenSetCursor(pCurs), and if FALSE, calls xf86SetCursor(NullCursor). If
xf86ScreenSetCursor(NullCursor) returns FALSE, it calls
xf86SetCursor(NullCursor) again and this repeats forever.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
String arguments as elements in the array passed to the link_with
argument in meson's executable() functions are not valid and will end up
causing the build file generation to file. This actually ended up
exposing a bug in meson that caused it not to report where in the
meson.build file it was failing:
https://github.com/mesonbuild/meson/pull/2527
The proper way to have a variable that can contain either an empty link
target or an actual link target is:
some_target = []
if some_cond
some_target = static_library(...)
endif
This way if some_cond is False, some_target gets set to [], gets passed
to executable() in the link_with array, and then gets removed by array
flattening.
This also unbreaks Xwayland builds with -Dglx=false, the thing that
originally made me notice this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
No need to lookup the link-status property if we don't have a crtc.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
XF86_PDEV_SERVER_FD is defined since:
commit 5fb641a29b
Author: Hans de Goede <hdegoede@redhat.com>
Date: Mon Jan 13 12:03:46 2014 +0100
hotplug: Extend OdevAttributes for server-managed fd support
ifdef'ing for it is a leftover from the external xf86-video-modesetting.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
../hw/xfree86/drivers/modesetting/driver.c: In function ‘redisplay_dirty’:
../hw/xfree86/drivers/modesetting/driver.c:586:20: warning: unused variable ‘ms’ [-Wunused-variable]
modesettingPtr ms = modesettingPTR(xf86ScreenToScrn(screen));
Move the variable ms into #ifdef GLAMOR_HAS_GBM, where it is used.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Warnings come from the fact that PRIx32 is not used for printing 32 bit
values instead of "%lx", and "%lx" evaluates to a 64 bit long on 64 bit
systems while PRIx32 always evaluates to the right type for the
respective arch.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
fbdevhw is the only file in X's source that actually uses #if DEBUG to
check for debugging instead of #ifdef DEBUG. This is contrary to
everything else that checks the DEBUG macro in the source, so let's make
it consistent and in turn, make our meson files a little simpler.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For the loadable modules it makes sense to build for PE/COFF targets, link
those loadable modules with the import library for the Xorg executable, so
that symbols provided by the executable can be satisfied at link time (as
required by PE/COFF).
Since this uses the syntax of using the returned build target object from an
executable() with an implib: kwarg to link_with:, introduced in meson 0.42
and a syntax error with older meson, also update the minimum meson version
which we require in project() to that.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
This provides an API wrapper around the kernel interface for queueing
a vblank event, simplifying all of the callers.
v2: Fix missing '|' in computing vbl.request.type
v3: Remove spurious bit of next patch (thanks, Michel Dänzer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Fixes several dozen cases like:
../hw/dmx/examples/ev.c: In function ‘main’:
../hw/dmx/examples/ev.c:147:29: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
tmp = "X";
^
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
../hw/dmx/dmx.c:66:12: warning: redundant redeclaration of ‘PanoramiXNumScreens’ [-Wredundant-decls]
extern int PanoramiXNumScreens;
^~~~~~~~~~~~~~~~~~~
In file included from ../hw/dmx/dmx.c:65:0:
../Xext/panoramiXsrv.h:11:22: note: previous declaration of ‘PanoramiXNumScreens’ was here
extern _X_EXPORT int PanoramiXNumScreens;
^~~~~~~~~~~~~~~~~~~
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Outputs may have NULL mode_output (connector) pointers if the
connector disappears while the server is running. Skip these when
resetting outputs with BAD link status.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Spotted by Appveyor:
xf86Crtc.c:3281:1: warning: ‘xf86_crtc_box_area’ defined but not used [-Wunused-function]
xf86_crtc_box_area(BoxPtr box)
^~~~~~~~~~~~~~~~~~
xf86Crtc.c:3268:1: warning: ‘x86_crtc_box’ defined but not used [-Wunused-function]
x86_crtc_box(xf86CrtcPtr crtc, BoxPtr crtc_box)
^~~~~~~~~~~~
xf86Crtc.c:3256:1: warning: ‘x86_crtc_box_intersect’ defined but not used [-Wunused-function]
x86_crtc_box_intersect(BoxPtr dest, BoxPtr a, BoxPtr b)
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
I couldn't find any, and I was modifying the implementation, so I had
to write some. I would like the test to end with a "make sure there
weren't any stray unchecked errors", but I didn't figure out how to do
that.
v2: Extend sync tests to cover alarm delta and waitvalue changes.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Since commit 3ef16dfb98, "dmx: fix
linking", linking dmx is broken for me:
CCLD Xdmx.exe
../../render/.libs/librender.a(glyph.o): In function `HashGlyph':
/wip/xserver/build.x86_64/../render/glyph.c:168: undefined reference to `x_sha1_init'
/wip/xserver/build.x86_64/../render/glyph.c:174: undefined reference to `x_sha1_update'
/wip/xserver/build.x86_64/../render/glyph.c:177: undefined reference to `x_sha1_update'
/wip/xserver/build.x86_64/../render/glyph.c:180: undefined reference to `x_sha1_final'
../../render/.libs/librender.a(mipict.o): In function `miClipPictureReg':
/wip/xserver/build.x86_64/../render/mipict.c:233: undefined reference to `pixman_region_n_rects'
/wip/xserver/build.x86_64/../render/mipict.c:234: undefined reference to `pixman_region_n_rects'
/wip/xserver/build.x86_64/../render/mipict.c:235: undefined reference to `pixman_region_rectangles'
/wip/xserver/build.x86_64/../render/mipict.c:236: undefined reference to `pixman_region_rectangles'
/wip/xserver/build.x86_64/../render/mipict.c:248: undefined reference to `pixman_region_init'
/wip/xserver/build.x86_64/../render/mipict.c:251: undefined reference to `pixman_region_not_empty'
/wip/xserver/build.x86_64/../render/mipict.c:261: undefined reference to `pixman_region_not_empty'
../../render/.libs/librender.a(mipict.o): In function `miComputeCompositeRegion':
/wip/xserver/build.x86_64/../render/mipict.c:340: undefined reference to `pixman_region_init'
The change this was fixing appears to be effectively reverted by
542d9f6807, so just revert commit
3ef16dfb98.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
UDL (usb) devices are blacklisted because of they weird behaviour when
it comes to vblank events. As EVDI uses very similar model of handling
vblanks it should be treated similarly.
When doing a page flip, EVDI does not wait for real vblank, but
simulates it by adding constant delay. It also does not support
DRM_IOCTL_WAIT_VBLANK.
In contrast to UDL, EVDI uses platform devices, thus instead of 'usb' in
path they all have 'platform'.
It is possible to blacklist by 'platform', so without explicitly saying
'evdi', but it might be misleading when it comes to real reason for it.
Signed-off-by: Dawid Kurek <dawid.kurek@displaylink.com>
Makes it easer to follow if 8 is between 7 and 9 ;-)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Calling xwl_window_from_window means looping through the window ancestor
chain whenever it is called on a child window or on an automatically
redirected window.
Since these properties and the potential ancestor's xwl_window are constant
between window realization and unrealization, we can omit the looping by
always putting the respective xwl_window in the Window's private field on
its realization. If the Window doesn't feature an xwl_window on its own,
it's the xwl_window of its first ancestor with one.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Not all compositors allow for customizing the Xwayland command line,
gnome-shell/mutter for example have the command line and path to
Xwayland binary hardcoded, which makes it harder for users to disable
glamor acceleration in Xwayland (glamor being used by default).
Add an environment variable XWAYLAND_NO_GLAMOR to disable glamor support
in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
By having it as a custom_target with build_always, every "ninja -C
build" would rebuild Xorg for the new date/time, even if the rest of
Xorg didn't change.
We could build the rest of Xorg into a static lib, and regenerate
date/time when the static lib changes and link that into a final Xorg,
but BUILD_DATE/TIME is such a dubious feature (compared to including a
git sha, which is easy with meson) it doesn't seem worth the build
time cost.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland would crash in some circumstances while trying to issue a
pointer locking when the cursor is hidden when there is no seat focus
window set.
The crash signature looks like:
#0 zwp_pointer_constraints_v1_lock_pointer ()
#1 xwl_pointer_warp_emulator_lock () at xwayland-input.c:2584
#2 xwl_seat_maybe_lock_on_hidden_cursor () at xwayland-input.c:2756
#3 xwl_seat_maybe_lock_on_hidden_cursor () at xwayland-input.c:2765
#4 xwl_seat_cursor_visibility_changed () at xwayland-input.c:2768
#5 xwl_set_cursor () at xwayland-cursor.c:245
#6 miPointerUpdateSprite () at mipointer.c:468
#7 miPointerDisplayCursor () at mipointer.c:206
#8 CursorDisplayCursor () at cursor.c:150
#9 AnimCurDisplayCursor () at animcur.c:220
#10 ChangeToCursor () at events.c:936
#11 ActivatePointerGrab () at events.c:1542
#12 GrabDevice () at events.c:5120
#13 ProcGrabPointer () at events.c:4908
#14 Dispatch () at dispatch.c:478
#15 dix_main () at main.c:276
xwl_pointer_warp_emulator_lock() tries to use the surface from the
xwl_seat->focus_window leading to a NULL pointer dereference when that
value is NULL.
Check that xwl_seat->focus_window is not NULL earlier in the stack in
xwl_seat_maybe_lock_on_hidden_cursor() and return early if not the case
to avoid the crash.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102474
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the compositor has no support for the Xwayland keyboard grab
protocol, there is no need to set-up our keyboard grab handler.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Left over from the following commits:
8465ee788f xwin: Remove native GDI engine (v2)
c79f824bf6 xwin: Remove primary DirectDraw engine
v2: drop leading - in the makefile
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk> (v1)
The function itself does not depend on the macro. Move it outside
of the ifdef guard and remove the identical copy in XWIN.
This is step 1 towards removing the duplication in winauth.c and moving
the OS specifics to os/
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
All the relevant code already uses the ::base::glx_enable_bits one.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
Those are xlib spellings, we say TRUE/FALSE pretty consistently
elsewhere in the server.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The version detect was erroring out with 1.9 protos installed, and we
weren't building the new code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The keyboard grabbing protocol for Xwayland is included in
wayland-protocol 1.9.
Update the wayland-protocol required version in both configure and meson
builds and add support for this new protocol in Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There were two bugs here: The comparison function was not stable when
one or more of the drivers being compared is a fallback, and the last
driver in the list would never be moved.
Signed-off-by: Adam Jackson <ajax@redhat.com>
libdrm's busid matching for the legacy three-integer bus string format
simply ignores the domain number, rather than what we were doing here of
packing the domain into the bus number. Whatever, just use the existing
code to build a busid string, since that gets the domain right.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Works around <rdar://problem/7150340>.
Tested-by: Martin Otte <martinjotte@gmail.com>
Tested-by: Tom Lane <tgl@sss.pgh.pa.us>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Copied from Mesa with no modifications.
Gives us Coffee Lake and Cannon Lake PCI IDs.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
... where it is named src/egl/wayland/wayland-drm/wayland-drm.xml and
has its requests sorted by protocol version number, avoiding a warning
from wayland-scanner.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We had a bug reported with a touchscreen where we could end up
in here with a NULL cursor, so let's not crash the X server.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-and-Tested-by: Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86str.h is parsed into sdksyms unconditionally but the symbol is only
defined when building with PCI support. Move the decl to a header that
sdksyms only parses when building PCI support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
gcc/glibc think the snprintf in dmxExecOS() might truncate. Yes, it
might, and we also don't care. Just delete all this.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
Modern glibc is very insistent that you care about whether write()
succeeds:
../hw/dmx/input/usb-keyboard.c: In function ‘kbdUSBCtrl’:
../hw/dmx/input/usb-keyboard.c:292:9: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
write(priv->fd, &event, sizeof(event));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This symbol is used by some DRI2+ drivers and there's nothing
DRI1-specific about it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
This appears to be essentially unused. The only known client-side
library for the SELinux extension is xcb, which does not look for the
name "Flask". The "SGI-GLX" alias for GLX appears to be a bit of
superstition at this point, NVIDIA's driver does not expose it and Mesa
does not check for it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
It was attempting to use the <bus>@<domain> format accepted by the BusID
stanza, but the two values were swapped.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The PCI domain has to be specified like this:
"PCI:<bus>@<domain>:<device>:<function>"
Example before:
(--) PCI:*(0:0:1:0) 1002:130f:1043:85cb [...]
(--) PCI: (0:1:0:0) 1002:6939:1458:229d [...]
after:
(--) PCI:*(0@0:1:0) 1002:130f:1043:85cb [...]
(--) PCI: (1@0:0:0) 1002:6939:1458:229d [...]
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Don't build BSD ossupport when there is no specific support, build stubs
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Our top-level glx.h include already provides all of the tokens we use,
and fixes redefinition warnings in the meson build.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The client could have said anything here, and if what they said doesn't
actually name an atom NameForAtom() will return NULL, and strcmp() will
be unhappy about that.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The 'tablet_tool_wheel' function for tablet scrolling was added back in
8a1defcc63 but left unimplemented. This commit fills in the necessary
details, using the "clicks" count as the number of discrete scroll up/down
events to send.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The 'tablet_tool_frame' function treats the button masks as though they
are zero-indexed, but 'tablet_tool_button_state' treats them as one-
indexed. The result is that an e.g. middle click event recieved from
Wayland will be sent from the X server as a right-click instead.
Fixes: 773b04748d ("xwayland: handle button events after motion events")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland doesn't override these, so we don't need defining those
in the xwl_screen struct.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the typical pattern in games of "hide cursor, grab with a confineTo,
warp constantly the pointer to the middle of the window" the last warping
step is actually rather optional. Some games may choose to just set up a
grab with confineTo argument, and trust that they'll get correct relative
X/Y axis values despite the hidden cursor hitting the confinement window
edge.
To cater for these cases, lock the pointer whenever there is a pointer
confinement and the cursor is hidden. This ensures the pointer position
is in sync with the compositor's when it's next shown again, and more
importantly resorts to the relative pointer for event delivery.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This fixes grabs on InputOnly windows whose parent is the root window
failing with GrabNotViewable. This is due to window->borderSize/windowSize
being computed as clipped by its parent, resulting in a null region.
Setting up the right size on the root window makes the InputOnly size
correct too, so the GrabNotViewable paths aren't hit anymore.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Of sorts, actually make it confine to the pointer focus, as the
InputOnly window is entirely invisible to xwayland accounting,
we don't have a xwl_window for it.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Of sorts, as we can't honor pointer warping across the whole root window
coordinates, peek the pointer focus in these cases.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the default behaviour was changed from clone mode to horizontal
extended layout, a boolean ScrnInfoRec member preferClone was introduced
to choose the old default behaviour. Option "PreferCloneMode" allows
setting this preferClone member.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
All that was left here was updating the FBO's size. However, the FBO
size was always set correctly already through
glamor_set_pixmap_texture() from whoever had attached a new BO to the
pixmap.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This needs a meson with PRs #1784, #1792 and #1794
Future work: remove conditionals which are always on, and simplify redundant
CYGDEBUG conditionals
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Don't unconditionally include rootless.h, and so we don't need to add
rootless to the include path unless building MWEXTWM.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
When running an Xwayland server from the command line, we end up
resetting the server every time all of the clients connected to the
server leave. This would be fine, except that xwayland makes the mistake
of unconditionally calling LoadExtensionList(). This causes us to setup
the glxExtension twice in a row which means that when we lose our last
client on the second server generation, we end up trying to call the glx
destructors twice in a row resulting in a segfault:
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x70845bf]
(EE) 2: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x32897d) [0x1196e5bd]
(EE) 3: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x328a45) [0x1196e745]
(EE) 4: /usr/lib64/dri/swrast_dri.so (__driDriverGetExtensions_virtio_gpu+0x32665f) [0x11969f7f]
(EE) 5: Xwayland (__glXDRIscreenDestroy+0x30) [0x54686e]
(EE) 6: Xwayland (glxCloseScreen+0x3f) [0x5473db]
(EE) 7: Xwayland (glxCloseScreen+0x53) [0x5473ef]
(EE) 8: Xwayland (dix_main+0x7b6) [0x44c8c9]
(EE) 9: Xwayland (main+0x28) [0x61c503]
(EE) 10: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x72b1401]
(EE) 11: Xwayland (_start+0x2a) [0x4208fa]
(EE) 12: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x18
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Easy reproduction recipe:
- Start an Xwayland session with the default settings
- Open a window
- Close that window
- Open another window
- Close that window
- Total annihilation occurs
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit aa6717ce2 switched xf86WaitForInput from using select(2) to using
poll(2). Before this change, the timeout was interpreted as being in
microseconds; afterwards it is fed directly to xorg_poll which interprets
it as being in milliseconds. This results in the function potentially
blocking 1000x longer than intended. This commit scales down the timeout
argument before passing it to xorg_poll, being careful to ensure the result
is not rounded down due to integer division.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
./hw/xfree86/common/xf86pciBus.c: In function ‘xf86MatchDriverFromFiles’:
../hw/xfree86/common/xf86pciBus.c:1330:52: warning: ‘snprintf’ output may be
truncated before the last format character [-Wformat-truncation=]
snprintf(path_name, sizeof(path_name), "%s/%s", ^~~~~~~
../hw/xfree86/common/xf86pciBus.c:1330:13: note: ‘snprintf’ output between 2
dirent->d_name is 256, so sprintf("%s/%s") into a 256 buffer gives us:
and 257 bytes into a destination of size 256
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The glamor_egl module that the GLAMOR paths are using is only built if
GLAMOR_HAS_GBM is true, and there's no plan for implementing the
module without GBM. Simplify modesetting's code as a result.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
../hw/xwin/winmultiwindowwm.c:188:1: warning: ‘MessageName’ defined but not used [-Wunused-function]
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
../hw/xwin/winshadgdi.c: In function ‘winCloseScreenShadowGDI’:
../hw/xwin/winshadgdi.c:632:12: warning: ‘fReturn’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winshadgdi.c:579:10: note: ‘fReturn’ was declared here
../hw/xwin/winshadddnl.c: In function ‘winCloseScreenShadowDDNL’:
../hw/xwin/winshadddnl.c:711:12: warning: ‘fReturn’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winshadddnl.c:661:10: note: ‘fReturn’ was declared here
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This is possibly an actual bug in failing to check we successfully retrieved
the monitor size before using it to set the X screen size.
../hw/xwin/winwndproc.c: In function ‘winWindowProc’:
../hw/xwin/winwndproc.c:283:55: warning: ‘dwHeight’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winwndproc.c:240:32: note: ‘dwHeight’ was declared here
../hw/xwin/winwndproc.c:281:54: warning: ‘dwWidth’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xwin/winwndproc.c:240:23: note: ‘dwWidth’ was declared here
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Because we can use a shared lib in dlsym() for the symbol loader test,
but we can't use the executable.
v2: Drop a stray ' ' and rebase on 820a4cbe9f, by anholt
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Whatever problem this is trying to fix, we don't care. Just include the
thing and stop worrying about whether _POSIX_SOURCE is defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
gcc -std=c99 does not define the former, and it's a horrible namespace
confusion anyway.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
I had said:
commit c42311a9d7
Author: Adam Jackson <ajax@redhat.com>
Date: Fri Mar 24 15:58:54 2017 -0400
kdrive: Remove KdOsFuncs
Only the Init slot was used, and Xephyr can just as easily do
that initialization directly.
And I'd've been right, but I forgot to make that initialization only
happen on startup (i.e. when serverGeneration == 1).
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Add options for DRI{1,2,3}
shmfence is required for DRI3
libdrm is required for any DRI{1,2,3}
Consolidate calls to dependency('libdrm')
Set WITH_LIBDRM when building with libdrm
v2:
Initialize libxserver_dri3 to []
Manually flatten libxserver, since meson doesn't (currently)
Use version_compare rather than circumloctions with dependency()
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
v2: Re-commit the patch reverted in
2388f5e583, with Aaron Plattner's
fix squashed in (by anholt).
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v1)
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Eric Anholt <eric@anholt.net>
This reverts commit 112d0d7d01.
It broke Xorg for Adam, Peter, and myself, by failing hard when a
module load failed.
Signed-off-by: Eric Anholt <eric@anholt.net>
I clearly hadn't run ninja test, since fb no longer had any of the fb
symbols in it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In the event that xwayland gets launched on a wayland compositor that
doesn't yet have support for wp_tablet_manager, we end up skipping the
initialization of the lists. This is wrong, because regardless of
whether or not a tablet is present we still attempt to traverse these
lists later in xwl_set_cursor(), expecting that if the lists are empty
from no tablet manager that we simply won't execute any loop iterations.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x3b) [0x4982f9]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x7f73722545bf]
(EE) 2: Xwayland (xwl_set_cursor+0x9f) [0x429974]
(EE) 3: Xwayland (miPointerUpdateSprite+0x261) [0x4fe1ca]
(EE) 4: Xwayland (mieqProcessInputEvents+0x239) [0x4f8d33]
(EE) 5: Xwayland (ProcessInputEvents+0x9) [0x4282f0]
(EE) 6: Xwayland (Dispatch+0x42) [0x43e2d4]
(EE) 7: Xwayland (dix_main+0x5c9) [0x44c6dc]
(EE) 8: Xwayland (main+0x28) [0x61c523]
(EE) 9: /lib64/libc.so.6 (__libc_start_main+0xf1) [0x7f7371e9d401]
(EE) 10: Xwayland (_start+0x2a) [0x4208fa]
(EE) 11: ? (?+0x2a) [0x2a]
(EE)
(EE) Segmentation fault at address 0x28
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Reproduced when trying to run upstream xwayland under fedora 25's weston
package.
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Only the Init slot was used, and Xephyr can just as easily do that
initialization directly.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
glibc would like to stop declaring major()/minor() macros in
<sys/types.h> because that header gets included absolutely everywhere
and unix device major/minor is perhaps usually not what's expected. Fair
enough. If one includes <sys/sysmacros.h> as well then glibc knows we
meant it and doesn't warn, so do that if it exists.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Building xserver with meson -Db_lto=true found this! Check it:
../hw/dmx/dmx.c:66:22: warning: type of ‘XRT_WINDOW’ does not match
original declaration [-Wlto-type-mismatch]
extern unsigned long XRT_WINDOW;
^
../include/resource.h:58:18: note: type ‘RESTYPE’ should match type ‘long
unsigned int’
typedef uint32_t RESTYPE;
^
../Xext/panoramiX.c:85:9: note: ‘XRT_WINDOW’ was previously declared here
RESTYPE XRT_WINDOW;
^
../Xext/panoramiX.c:85:9: note: code may be misoptimized unless
-fno-strict-aliasing is used
I have never managed successfully to build xserver with LTO with
autotools, so, score one for meson.
Get the decl from panoramiXsrv.h, which includes panoramiX.h first anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
I converted Xorg when meson 0.40 came out, but fumbled my grep and
forgot that I had instances of the .extract_all_objects() workaround
in dixmods, too.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Hooked up a bit differently to the other tools. Those tools can be static for
all and be re-used. The wacom driver initializes the pad with the correct
number of buttons though and we can't do this until we have the pad done event.
If the tablet is removed and we plug a different one in, we should initialize
that correctly, so unlike the other tools the pad is properly removed and
re-initialized on plug.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Each xwl_tablet_tool gets a xwl_cursor, as on wayland each of those
will get an independent cursor that can be set through
zwp_tablet_tool.set_cursor.
However, all tools (and the pointer) share conceptually the same VCP
on Xwayland, so have cursor changes trigger a xwl_cursor update on
every tool (and the pointer, again). Maybe Xwayland could keep track
of the most recent device and only update that cursor to get better
visual results, but this is simpler, and it's going to be odd
anyway...
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This struct takes away the cursor info in xwl_seat, and has
an update function so we can share the frame handling code
across several xwl_cursors.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Make sure the button events are sent after the motion events into the new
position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Translates Wayland tablet events into corresponding X11 tablet events. As
with the prior commit, these events are modeled after those created by the
xf86-input-wacom driver to maximize compatibility with existing applications.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Creates and maintains the canonical trio of X devices (stylus, eraser,
and cursor) to be shared by all connected tablets. A per-tablet trio
could be created instead, but there are very few benefits to such a
configuration since all tablets still ultimately share control of a
single master pointer.
The three X devices are modeled after those created by xf86-input-wacom
but use a generic maximum X and Y that should be large enough to
accurately represent values from even the largest currently-available
tablets.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
The wp_tablet_seat interface provides us with notifications as tablets,
tools, and pads are connected to the system. Add listener functions and
store references to the obtained devices.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
If we're notified about the existence of the wp_tablet_manager interface,
we bind to it so that we can make use of any tablets that are (or later
become) available. For each seat that exists or comes into existance at
a later point, obtain the associated tablet_seat.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Without this, assertion failures can make life hard for users and those
trying to help them.
v2:
* Change commit log wording slightly to "can make life hard", since
apparently e.g. logind can alleviate that somewhat.
* Set default handler for SIGABRT in
hw/xfree86/common/xf86Init.c:InstallSignalHandlers() and
hw/xquartz/quartz.c:QuartzInitOutput() (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The number for it was merged to drm_mode.h in kernel 4.7, and the
output_names[] array just requires that we slot in new strings in
order.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The build defines these, so having the defaults is just a way for the
build system's configuration to get out of sync with the code.
v2: Drop #ifndefs around the other two defines.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
parser/scan.c was checking for #ifdef XCONFIGFILE and XCONFIGDIR and
defaulting to "xorg.conf", and "xorg.conf.d", so if you had changed
__XCONFIGFILE__ to anything else, it would have got out of sync.
Settle on the name without gratuitous underscores.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Be more precise in describing the return value.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
E.g. because Xinerama is enabled.
Fixes crash on startup and wrong colours in that case.
Bugzilla: https://bugs.freedesktop.org/100293
Bugzilla: https://bugs.freedesktop.org/100294
Fixes: 62f4405257 ("xfree86/modes: Move gamma initialization to
xf86RandR12Init12 v2")
Tested-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Despite all the careful planning of the kernel, a link may become
insufficient to handle the currently-set mode. At this point, the
kernel should mark this particular configuration as being broken
and potentially prune the mode before setting the offending connector's
link-status to BAD and send the userspace a hotplug event. This may
happen right after a modeset or later on.
Upon receiving a hot-plug event, we iterate through the connectors to
re-apply the currently-set mode on all the connectors that have a
link-status property set to BAD. The kernel may be able to get the
link to work by dropping to using a lower link bpp (with the same
display bpp). However, the modeset may fail if the kernel has pruned
the mode, so to make users aware of this problem a warning is outputed
in the logs to warn about having a potentially-black display.
This patch does not modify the current behaviour of always propagating
the events to the randr clients. This allows desktop environments to
re-probe the connectors and select a new resolution based on the new
(currated) mode list if a mode disapeared. This behaviour is expected in
order to pass the Display Port compliance tests.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Otherwise xcb will treat our attempt to send xv requests as a connection
error (quite reasonably: we're asking it to emit a request for which
there is no defined major opcode), and we'll die quietly the first time
we hit KdBlockhandler.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
DRM_EVENT_CONTEXT_VERSION is the latest context version supported by
whatever version of libdrm is present. modesetting was blindly asserting
it supported whatever version that may be, even if it actually didn't.
With libdrm 2.4.78, setting a higher context version than 2 will attempt
to call the page_flip_handler2 vfunc if it was non-NULL, which being a
random chunk of stack memory, it might well have been.
Set the version as 2, which should be bumped only with the appropriate
version checks.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
No driver is using these, as far as I know.
v2: Tripwire the entity hook arguments to xf86Config*Entity, fix
documentation (Eric Anholt)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than setting up a per-screen private, just conditionally
initialize ScrnInfoRec::DPMSSet based on the config options, and inspect
that to determine whether DPMS is supported.
We also move the "turn the screen back on at CloseScreen" logic into the
DPMS extension's (new) reset hook. This would be a behavior change for
the non-xfree86 servers, if any of them had non-stub DPMS support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
A null pointer dereference can occur in dmxSync, because TimerForce
does not handle a null pointer.
dmxSyncTimer is set to NULL a few lines above on a certain condition,
which happened on my machine. The explicit NULL check allowed me to
start Xdmx again without a segmentation fault.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The X Server never generates a global config.h, and instead all these
paths are including dix-config.h or xorg-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
It had nothing left in it that was used but wasn't in dix-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
ajax deleted the evdev driver in the removal of fbdev and the linux
backend.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
There is no pixmap associated with source-only pictures.
Fixes Xephyr -fakexa crashing on startup.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Multiple calls to xf86EdidMonitorSet (which can be triggered e.g. by
running xrandr) would potentially keep adding the same modes, causing
the Monitor->Modes list to keep growing larger and using up more memory.
Fix this by calling xf86PruneDuplicateModes after adding the modes
returned by xf86DDCGetModes. This makes sure there's only one instance
of each unique mode in the list.
v2:
* Replace semicolon with {} for empty for loop (Emil Velikov)
* Slightly tweak commit log to avoid minor inaccuracy about what
xf86PruneDuplicateModes does
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99521
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Copied from Mesa with no modifications. Gives us Geminilake PCI IDs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
There's really no reason to pretend to support this, apps hate it, all
we're doing is giving people a way to injure themselves. It doesn't work
anyway with any Radeon, any NVIDIA chip, or any Intel chip since i810.
Rip out all the logic for handling 24bpp pixmaps and framebuffers, and
silently ignore the old options that would ask for it.
The cirrus alpine driver has been updated to default to 16bpp, and both
it and the i810 driver can now use the 32->24 conversion code in shadow
if they want. All other drivers support 32bpp. Configurations that
explicitly request 24bpp in order to fit in VRAM will be broken now
though.
v2: Fix command line options to silently ignore 24bpp rather than fail
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This ends up passing 0 as the bpp argument to fb screen setup, which is
not really the best plan.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the screen pixmap or the corresponding texture creation with glamor
fails, exit cleanly with an error message instead of segfaulting.
Fixes: https://bugzilla.redhat.com/1431633
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The linemarkers in the preprocessor output from gcc5 on Cygwin have
canonicalized paths to included files (e.g. xserver/build/../include/misc.h
is canonicalized to xserver/build/include/misc.h). (see gcc svn rev 210264,
which causes the transformation performed by -fcanonical-system-headers to
be applied to all include pathnames)
These canonicalized paths won't match $topdir, so sdksyms doesn't look at
the contents of those headers for sdk exported symbols.
Workaround this by canonicalizing all the paths we consider, using readlink.
v2:
Keep a cache of readlink results so it isn't quite so dreadfully slow.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Client resources can survive the client itself, in which case we
may end up in our sync callback trying to access client's data after
it's been freed/reclaimed.
Add a ClientStateCallback handler to monitor the client state changes
and clear the sync callback set up by the glamor drm code if any.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
After an X cursor is unrealized, the seat's corresponding x_cursor is
cleared, but if a frame callback was pending at the time, it will
remain and thus prevent any further cursor update, leaving the window
with no cursor.
Make sure to destroy the frame callback, if any, when that occurs, so
that next time a cursor needs to be set, it won't be ignored for a frame
callback that will never be triggered.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1389327
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Rui Matos <tiagomatos@gmail.com>
in XWayland, dri3_send_open_reply() is called from a sync callback, so
there is a possibility that the client might be gone when we get to the
callback eventually, which leads to a crash in _XSERVTransSendFd() from
WriteFdToClient() .
Check if clientGone has been set in the sync callback handler to avoid
this.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99149
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100040
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1416553
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Mark B <mark.blakeney@bullet-systems.net>
keyboard_check_repeat() fetches the XWayland seat from the
dev->public.devicePrivate do do its thing.
If a key event is sent programmatically through Xtest, our device is the
virtual core keyboard and that has a dev->public.devicePrivate of NULL,
leading to a segfault in keyboard_check_repeat().
This is the case with "antimicro" which sends key events based on the
joystick buttons.
Don't set the checkRepeat handler on the VCK since it cannot possibly work
anyway and it has no effect on the actual checkRepeat intended functionality.
Bugzilla: https://bugzilla.redhat.com/1416244
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the shadow framebuffer overallocation bug fixed (ref below), Xorg +
fbdev has tens to hundreds of kilobytes more baseline memory usage than
Xfbdev. That's not nothing, but it's little enough that we should focus
our efforts on the server that actually gets development attention.
https://cgit.freedesktop.org/xorg/driver/xf86-video-fbdev/commit/?id=2c5eba8
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
The code as written would match anything declared extern. _X_EXPORT is
what we really mean here. That's a macro, so check for what it expands
to and skip if not found.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
During the InitInput() phase, the wayland events get dequeued so we
can possibly end up calling dispatch_pointer_motion_event().
If this occurs before xwl_seat->focus_window is set, it leads to a NULL
pointer derefence and a segfault.
Check for xwl_seat->focus_window in both pointer_handle_frame() and
relative_pointer_handle_relative_motion() prior to calling
dispatch_pointer_motion_event() like it's done in
pointer_handle_motion().
Bugzilla: https://bugzilla.redhat.com/1410804
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The X11 window manager (XWM) of a Wayland compositor can use the
_XWAYLAND_ALLOW_COMMITS property to control when Xwayland sends
wl_surface.commit requests. If the property is not set, the behaviour
remains what it was.
XWM uses the property to inhibit commits until the window is ready to be
shown. This gives XWM time to set up the window decorations and internal
state before Xwayland does the first commit. XWM can use this to ensure
the first commit carries fully drawn decorations and the window
management state is correct when the window becomes visible.
Setting the property to zero inhibits further commits, and setting it to
non-zero allows commits. Deleting the property allows commits.
When the property is changed from zero to non-zero, there will be a
commit on next block_handler() call provided that some damage has been
recorded.
Without this patch (i.e. with the old behaviour) Xwayland can and will
commit the surface very soon as the application window has been realized
and drawn into. This races with XWM and may cause visible glitches.
v3:
- introduced a simple setter for xwl_window::allow_commits
- split xwl_window_property_allow_commits() out of
xwl_property_callback()
- check MakeAtom(_XWAYLAND_ALLOW_COMMITS)
v2:
- use PropertyStateCallback instead of XACE, based on the patch
"xwayland: Track per-window support for netwm frame sync" by
Adam Jackson
- check property type is XA_CARDINAL
- drop a useless memcpy()
Weston Bug: https://phabricator.freedesktop.org/T7622
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix the following warning due to --disable-glamor:
CC Xwayland-xwayland.o
In file included from /home/pq/local/include/wayland-client.h:40:0,
from xwayland.h:35,
from xwayland.c:26:
xwayland.c: In function ‘block_handler’:
/home/pq/local/include/wayland-client-protocol.h:3446:2: warning: ‘buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
wl_proxy_marshal((struct wl_proxy *) wl_surface,
^
xwayland.c:466:23: note: ‘buffer’ was declared here
struct wl_buffer *buffer;
^
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Refactor xwl_screen_post_damage() and split the window specific code
into a new function xwl_window_post_damage().
This is a pure refactoring, there are no behavioral changes. An assert
is added to xwl_window_post_damage() to ensure frame callbacks are not
leaked if a future patch changes the call.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
First, move them to the end of the struct, for marginally better cache
locality for the struct members that actually have meaning; move the
existing slots at the end of the struct up near some others with similar
meanings. Second, only keep four slots each of integer, data pointer,
and function pointer; we've rarely used this escape hatch so this is
still plenty.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Never set by the core, not used in any modern driver.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Just no.
The ddxDesign chunk removes the whole para about xf86FixPciResource,
since it turns out that function doesn't exist at all anymore.
The only drivers that reference this at all are i128 and mga, and even
then only in the non-pciaccess path.
v2:
- Update commentary about i128/mga
- Don't remove the BiosBase keyword from the config parser since that
would turn a no-op into a fatal error (Aaron Plattner)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Seriously not worth the effort of tracking this, especially now that
competent drivers don't have a limit. The sis driver does inspect this
member, but hilariously does so only so it can print the same information
as the core does.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Only mach64 and rendition actually use this feature. Everyone else just
checks it in their ValidMode hook, they can too.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We don't actually need (or intend) to keep this struct the same across
revisions.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Previously, we would swap the width/height of the Xwayland output based
on the output rotation, so that the overall screen size would match the
actual rotation of each output.
Problem is the RandR's ConstrainCursorHarder() handler will also apply
the output rotation, meaning that when the output is rotated, the
pointer will be constrained within the wrong dimension.
Moreover, XRandR assumes the original output width/height are unchanged
when the output is rotated, so by changing the Xwayland output width and
height based on rotation, Xwayland causes XRandr to report the wrong
output sizes (an output of size 1024x768 rotated left or right should
remain 1024x768, not 768x1024).
So to avoid this issue and keep things consistent between Wayland and
Xwayland outputs, leave the actual width/height unchanged but apply the
rotation when computing the screen size. This fixes both the output size
being wrong in "xrandr -q" and the pointer being constrained in the
wrong dimension with rotated with weston.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the Wayland compositor sets a rotation on the output, Xwayland
translates the transformation as an xrandr rotation for the given
output.
However, if the rotation is not supported by the CRTC, this is not
a valid setup and xrandr queries will fail.
Pretend we support all rotations and reflections so that the
configuration remains a valid xrandr setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
For some applications (like fullscreen games) it matters for XRandr
resolution to be correctly set and equal to root window resolution.
In XServer there is already hack for this, adapted it for XWayland.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99574
Signed-off-by: Svitozar Cherepii <razotivs@gmail.com>
Tested-by: Svitozar Cherepii <razotivs@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Currently if modesetting ever fails to set a hardware cursor it will switch
to using a software cursor and never go back. Change this to only
permanently switch to a software cursor if -ENXIO is returned (which means
hardware cursors not supported), and to otherwise still try a hardware
cursor first every time a new one is set. This is needed because hardware
may be able to handle some cursors in hardware and others not, or virtual
hardware may be able to handle hardware cursors at some times and not
others.
Changes since v1, v2 and v3:
* take into account the switch to load_cursor_argb_check
* keep the permanent software cursor fall-back if -ENXIO is returned
* move parts of v3 into separate patches
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5:
- Removed parts of patch already committed as part of 14c21ea1.
- Adjusted code slightly to match surrounding code.
- Effectively reverted af916477 which is made unnecessary by this patch.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5: Updated the patch to apply to current git HEAD, split up into two
patches (server and modesetting driver) and adjusted the code slightly
to match surrounding code. I also removed the new exported function
ShowCursorCheck(), as instead just changing ShowCursor() to return Bool
should not affect its current callers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
xf86RecolorCursor() may be called directly from XRecolorCursor as well
as from xf86ScreenSetCursor(). In the latter case, the input lock is
already held, but not for the former and so we need to add a wrapper
function that acquires the input lock before performing
xf86RecolorCursor()
References: https://bugs.freedesktop.org/show_bug.cgi?id=99358
This can happen when a module fails to load:
Program received signal SIGSEGV, Segmentation fault.
UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
848 name = mod->VersionInfo->modname;
(gdb) bt
#0 UnloadModule (_mod=0x5555559d9280) at ../../../../hw/xfree86/loader/loadmod.c:848
#1 0x00005555555ddd1b in LoadModule (module=module@entry=0x5555559c7ce0 "fbdev", options=0x0, modreq=modreq@entry=0x0, errmaj=errmaj@entry=0x7fffffffe8ec) at ../../../../hw/xfree86/loader/loadmod.c:824
#2 0x00005555555edfe9 in xf86LoadModules (list=list@entry=0x5555559dcf50, optlist=optlist@entry=0x0) at ../../../../hw/xfree86/common/xf86Init.c:1506
#3 0x00005555555ee7bc in InitOutput (pScreenInfo=pScreenInfo@entry=0x5555559abf80 <screenInfo>, argc=argc@entry=4, argv=argv@entry=0x7fffffffeb18) at ../../../../hw/xfree86/common/xf86Init.c:484
#4 0x00005555555a885c in dix_main (argc=4, argv=0x7fffffffeb18, envp=<optimized out>) at ../../dix/main.c:197
#5 0x00007ffff5d582b1 in __libc_start_main (main=0x555555593130 <main>, argc=4, argv=0x7fffffffeb18, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffeb08) at ../csu/libc-start.c:291
#6 0x000055555559316a in _start ()
Fixes: 8e83eacb9e ("loader: Remove unused path and name from ModuleDescPtr")
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
V2:
1. update comment
2. check bustype if PCI
3. configure add libdrm version check for drmGetDevice
Get PCI information from info->fd with drmGetDevice instead of
assuming the info->fd is the first entity of scrn which is not
true for multi entities scrn.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Just a waste of memory. Path was never referenced at all, and name was
only used when unloading the module; we can just as well get the
module's internal idea of its name from VersionInfo.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nobody was ever calling this with a non-null argument for subdir list or
pattern list. Having done this, InitSubdirs is only ever called with a
NULL argument, so it's really just a complicated way of duplicating the
default list; we can remove that and just walk the list directly.
The minor error code was only ever used to distinguish among two cases
of LDR_BADUSAGE. Whatever.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Callers only ever use this for a single directory anyway.
While we're at it, also move xf86DriverListFromCompile near its only
user in the X -configure code (and inline it out of existence), and
remove LoaderFreeDirList as it's unused (since X -configure is just
going to exit anyway, none of that code cares about cleanup).
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There's no reason a driver should ever care about this.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
indent(1) gets confused by function-like macros with no trailing
semicolon, which is fair enough really.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The idea here is that the driver might have once been old enough to not
have the driverFunc slot in DriverRec, with the module ABI not having
changed when it was added. That was ages ago, and drivers always declare
themselves with DriverRec not DriverRec1, so uninitialized slots will
simply be zero.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Everybody using this functionality specifies a major version, which
makes sense. If you don't care about a minor version, that's equivalent
to saying you require minor >= 0, so just say so; likewise patch level.
Likewise ABI class is always specified.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The enum has been unused since at least the removal of elfloader.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This looks like more, but only if you don't compare it to the number
pulled in by misc.h.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This API is dumb. uname(3) exists, feel free to use it, but ideally
write to the interface not to the OS. There are a couple of drivers
using this API, they could all reasonably just not.
This also removes the OS name from the loader subdirectory path search.
Having /usr/lib/xorg shared across OSes is a non-goal here.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Now that users can set the path only via LoaderSetPath(), we can simplify
things.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Afaics the argument hasn't been part of the API since the documentation
has been converted to xml with commit fc6ebe1e1d "Convert LinuxDoc
documents to DocBook/XML"
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Similar to its little brother - LoadSubModule. Currently all call sites
provide NULL anyway ;-)
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The "copying selected object files" message appears as some source
files have the same name, and some objects are included twice.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Detailed mode reports 108 mm x 68 mm which is for smaller display.
Maximum image size reports 15 cm x 10 cm which aligns with its physical
size, use this size instead.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Allow OutputClass config snippets to modify the module-path.
Note that any specified ModulePaths will be pre-pended to the normal
ModulePath. The idea behind this is that any output hardware specific
modules should have preference over the normal modules.
One use-case for this is the nvidia binary driver, this allows a
config snippet like this:
Section "OutputClass"
MatchDriver "nvidia"
Modulepath "/usr/lib64/nvidia/modules"
EndSection
To get the nvidia glx specific glx module loaded, but only when the
nvidia kernel driver is loaded.
Together with the glvnd work done recently, this allows the nouveau
+ mesa and nvidia-binary userspace stacks to co-exist on the same
system without any ldconfig / xorg.conf tweaking and the xserver will
automatically do the right thing depending on which kernel driver
(nouveau or nvidia) is loaded.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Allow using:
Option "PrimaryGPU" "yes"
In an OutputClass section to override the default primary GPU device
selection which selects the GPU used as output by the firmware.
If multiple output devices match an OutputClass section with
the PrimaryGPU option set, the first one enumerated becomes the
primary GPU.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for allowing an OutputClass section to
override the default primary GPU device selection.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for setting options in OutputClass Sections and having these
applied to any matching output devices.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make OutputClassMatches directly take a xf86_platform_device as argument,
rather then an index into xf86_platform_devices. This makes things
easier for callers which already have a xf86_platform_device pointer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>