/sys/devices reflects the bus topology, and we don't care that much.
Easier (and more reliable) to just look in /sys/bus/pci/devices, which
is a flat view.
When we see an evdev or vmmouse section, assume that it's a mouse, and
don't add a default mouse device. This will break users who have an
evdev keyboard section but no mouse, and want the mouse to get added
by default.
Now, fbcmap_mi.c contains the fb functions which just wrap mi functions.
Previously, these were in fbcmap.c and compiled when XFree86Server was defined.
Now, clients of fbcmap should either use fbcmap.c or fbcmap_mi.c and not worry
about setting the XFree86Server symbol.
It seems that the changes to X input exposed a problem that wasn't detected
before. The axis clipping code in GetPointerEvents() uses those limits to
constrain the pointer's coordinate range. The max was zero so the pointer
couldn't move.
Use new dmxCoreMotion2() function which enqueues motion events with
GetPointerEvents()/mieqEnqueue().
The clipAxis() code in GetPointerEvents() is causing some grief. The
limits seem to have always been (0,0) according to the original calls
to InitValuatorAxisStruct() in dmxinputinit.c.
Terrible hack for now: Call InitValuatorAxisStruct() with hard-coded max
values of 1280 (my screen width).
Additionally, protect libcw setup behind checks for Render, to avoid
segfaulting if Render isn't available (xnest).
The previous setup was an ABI-preserving dance, which is better nuked now.
Now, anything that needs libcw must explicitly initialize it, and
miDisableCompositeWrapper (previously only called by EXA and presumably binary
drivers) is gone.
Yes, two changes in one commit. Sorry 'bout that.
The first change ensures that when pending property values have been
changed, a mode set to the current mode will actually do something, rather
than being identified as a no-op. In addition, the driver no longer needs to
manage the migration of pending to current values, that is handled both
within the xf86 mode setting code (to deal with non-RandR changes) as well
as within the RandR extension itself.
The second change eliminates the two-call Create/AttachScreen stuff that was
done in a failed attempt to create RandR resources before the screen
structures were allocated. Merging these back into the Create function is
cleaner.
(cherry picked from commit 57e87e0d00)
Conflicts:
randr/randrstr.h
randr/rrcrtc.c
I think master and server-1.3-branch are more in sync now.
desiredX and desiredY were not recorded during xf86InitialConfiguration.
desiredX, desiredY and desiredRotation were not recorded during
xf86SetSingleMode.
(cherry picked from commit 36e5227215)
Pending Properties take effect when the driver says they do, so provide an
API to tell DIX when a property effect is made. Also, allow driver
to reject property values in RRChangeOutputProperty.
(cherry picked from commit 8eb288fbd6)
The rotation state is stored in the xf86_config structure which is not
re-initialized at server reset time. Clean it up at CloseScreen time.
(cherry picked from commit f8db7665dc)
The former <X11/extensions/XKBsrv.h> has been pulled into the server now as
include/xkbsrv.h, and the world updated to look for it in the new place,
since it made no sense to define server API in an extension header. Any
further work along this line will need to do similar things with XKBgeom.h
and friends.
The DDC code sets the I2C timeouts to VESA standards, except that it had an
extra setting of the ByteTimeout value which was wrong (off by a factor of
50). Removing this should help DDC work on many more monitors. Note that the
Intel driver duplicated these settings, along with the error. Yay for cult
and paste coding.
The xf86 mode setting code was mis-using this field to try and store a
pointer to a DisplayModeRec, however, each output has its own copy of every
DisplayModeRec leaving the one in in the RRModeRec devPrivate field pointing
at a random DisplayModeRec.
Instead of attempting to rectify this, eliminating the devPrivate entirely
turned out to be very easy; the DDX code now accepts an arbitrary RRModeRec
structure and set that to the hardware, converting it on the fly to a
DisplayModeRec as needed.
(cherry picked from commit 3506b9376c)
The RandR protocol spec has several requests in support of user-defined
modes, but the implementation was stubbed out inside the X server. Fill out
the DIX portion and start on the xf86 DDX portion. It might be necessary to
add more code to the DDX to insert the user-defined modes into the output
mode list.
(cherry picked from commit 63cc2a51ef)
Conflicts:
randr/randrstr.h
Updated code to work in master with recent security API changes.
Rotation block handler was re-registering the rotation damage structure,
creating an infinite loop in the damage code. Track registration of the
damage structure to avoid this.
(cherry picked from commit b14f003b0e)
xf86_reload_cursors is supposed to be called from the crtc mode setting
commit hook; as that happens during server initialization, check for this
case.
(cherry picked from commit 5b77bf2d02)
This moves most of the cursor management code out of the intel driver and
into the general server code. Of course, the hope is that this code will be
useful for other driver writers as well.
Check out xf86Crtc.h for the usage information, making sure you add the
needed hooks to the crtc funcs structure for your driver.
(cherry picked from commit 4d81c99a46)
The length of the Xprint font file NewCenturySchlbk-BoldItalic.pmf
pushes the full path over the traditional 100 character limit for
tarballs (when module version number is included). Shorten it to
NewCentSchlbk-BoldItal.pmf to get back below the limit and rename
other font files in that family to match.
Previous version used monitor identifiers if present, otherwise output
names. That caused existing working configurations to break when additional
information was added to the configuration file.
(cherry picked from commit 3f5cedf00a)
Screen physical size is set to a random value before the RandR code gets
control, override that and reset it to a value based on the compat_output
physical size (if available). If that output has no physical size, just use
96dpi as the default resolution and set the physical size as appropriate.
(cherry picked from commit 843077f23a)
xf86SetDesiredModes applies the desired modes to each crtc (as selected by
xf86InitialConfiguration initially and modified by successful mode settings
afterwards). For crtcs without a desired mode, pScrn->currentMode is used to
select something workable.
(cherry picked from commit bcade98cca)
This function applies a single mode to the screen (as from RandR 1.1,
XFree86-VidModeExtension or XFree86-DGA) using a policy that selects one
output to reconfigure to the requested mode and then makes all other outputs
fit within that size.
(cherry picked from commit 5a595c1f76)
Box transformation from source to dest area was broken, leaving the wrong
areas painted when the crtc origin was non-zero.
When rotating from left to right, the pixmap doesn't get reallocated, and so
no damage was left in the pixmap from xf86RotatePrepare. Separately damage
the whole crtc area when this occurs to repaint the area.
(cherry picked from commit 2a50ca2160)
Change symlinks to Xprint base fonts in model/PSdefault using local
relative links. This facilitates moving the Xprint config files, for
instance for FHS compliance placing data files in /usr/share rather
than /usr/lib. Also ensures NewCenturySchlbk-BoldItalic.pmf is
installed.
canGrow indicates to the DDX that the driver can enlarge the desktop via the
xf86_config->funcs->resize hook. If so, xf86InitialConfiguration will set
virtual[XY] to match the configuration it chooses and will leave the crtc config
size ranges alone. If FALSE, it will bloat the screen to fit the largest probed
mode and also set the crtc config max size to limit the desktop to the initial
virtual[XY] size.
This hook is called when the DDX needs to resize the screen. The driver is
responsible for changing virtualX and virtualY, along with any other related
screen properties (devPrivate.ptr, devKind, displayWidth, etc.).
Use the size range from the crtc config instead of randrp->virtual[XY] when
reporting the min and max screen sizes to the DDX.
The hook is called whenever the clipList of any DRI window changes, be it via
DRIClipNotify, DRICreateDrawable or DRIDrawablePrivDelete. This allows the
driver to keep track of which DRI windows are visible where.
in xf86CrtcSetMode, scrn->pScreen will be NULL during server startup time,
so don't try to set the subpixel order. subpixel order will be set in the
randr initialization anyways.
(cherry picked from commit 5f6f8616d8)
New modes header files required a few minor changes to be used by external
drivers, the most notable of which is the publication of the config file
parser header files.
Add monitor "Rotate" option taking one of "normal", "left", "inverted" or
"right". However, because initial mode selection is made before the screen
is completely initialized, we cannot create the shadow pixmap object at this
point. Pend the shadow pixmap creation until the block handler.
Note that this code is not completely functional yet.
Code added in hw/xfree86/modes came from the server-1.3-branch.
Portions of this code had previously been integrated into xf86Mode.c
and edid_modes.c.
To preserve hw/xfree86/modes as much as possible, the duplicate code from
the other files has been disabled; a more careful review would figure out
where that code actually belonged.
RandR 1.0 sizeID must be computed the same way every time, so when reporting
it in the ScreenChangeNotify event, just construct the usual 1.0 data block
and use that.
subpixel geometry information can be computed by looking at the connected
outputs and finding any with subpixel geometry and using one of those for
the global screen subpixel geometry. This might be improved by reporting
None if more than one screen has information and they conflict.
This code comes from the intel driver, so there's no history in this tree.
As the crtc/output-based mode selection code uses ddc, the ddc and i2c
modules have been merged into the server. Attempts to load them are safely
ignored now.
This instruction is being used in some debug VBIOSes. This implementation
doesn't even try to be accurate. Instead, it just increments the counter by a
fixed amount every time an rdtsc instruction in encountered, to avoid divides by
zero.
Our modes typically come from EDID or default modes, and when the monitor
asks for a specific mode, deciding to tweak it usually results in incorrect
display. And if the user is specifying a mode by hand, tweaking it then is
still pretty rude.
Reviewed by: ajax
Currently, the call to linuxPciOpenFile() is always made for read
only access which causes the subsequent mmap call to fail when the
memory is mapped read/write.
Xorg #9692
xf86ReadLegacyBIOS is only used by one function in int10/generic.c.
Move a generic implementation of that function there, rename it to
read_legcay_BIOS, and delete all remnants of it from all other places.
Convert xf86GetPciHostConfigFromTag to a new function called
get_parent_bridge. This name better represents what
xf86GetPciHostConfigFromTag is used for: walking up the lists of PCI
bridges from a device.
There's no need to store the slot information for a PCI device as its
ID. Instead, skip the middle man and just store a pointer to the
pci_device structure.
Rather than allocate a 9 byte buffer on each invocation, use a static
16 byte buffer. Use snprintf for safety. This commit should probably
be cherry-picked to the trunk.
Eliminate xf86GetPciDomain. The domain from libpciaccess is the
domain. Period. This means that 0 is a valid domain. Make sure that
INCLUDE_XF86_NO_DOMAIN is *not* set. Always run in "domain mode,"
even if the only domain possible is 0.
Convert all uses of PCITAG in int10 and vgaHW to 'struct pci_device'.
This allows the conversion of xf86ReadLegacyVideoBIOS and
xf86MapDomainMemory to 'struct pci_device' from PCITAG.
The fbdev API doesn't allow setting the pitch explicitly, so we have to set
the virtual width to the pitch we're using for drawing. This fixes corruption
after changing the virtual width with RandR.
The fbdev API allows the driver to 'accept' modes it doesn't really support by
modifying it to the nearest supported mode. Without this check, e.g. vesafb
would appear to accept all modes, even though it actually can't set any modes
other than the bootup mode at all.
This has been what has been used the most successfully post-damagetrack.
The current thinking is that:
1) We should be able to accelerate basically everything. So we don't need to
try to migrate trees of pixmaps permanently out of framebuffer to speed
CPU drawing up.
2) Migration is cheaper in the thrashing case, so we don't want to go to a lot
of effort to try (and fail badly) to find a working set.
- Added -extension & +extension to Xserver man page
- Changed Xorg synopsis from X11R6 to X11R7
- Clarified Xorg ancestry description
- Moved Solaris to free/Open Source OS list
- Removed references to MetroLink module loader & getconfig
- Converted (1) to (__appmansuffix__) in a few more places
- Replaced http://www.freedesktop.org/cvs/ with http://gitweb.freedesktop.org/
Fixes a build breakage when $(top_srcdir) != $(top_builddir) because
-I$(top_srcdir)/include is missing for the cvt, ioport, pcitweak, and scanpci
builds.
Signed-off-by: Adam Jackson <ajax@nwnk.net>
This also removes static from some other functions that had been copied out
to at least the intel driver, but perhaps others that were doing mode list
handling.
As discussed on the mailing list, people would rather have an X command-line
option to print the module path so installers can know where to put modules,
rather than the installers using `pkg-config --variable=moduledir xorg-server`,
since some distros choose not to install xorg-server.pc.
xf86 drivers need to create RandR object in the PreInit stage,
before the ScreenRec is allocated. Changing the RandR DIX code
to permit this required the addition of functions that later associate the
objects with the related screen.
An additional change is that modes are now global, and no longer associated
with a specific screen. This change actually makes mode management cleaner
as there is no more per-screen list of modes to deal with.
This changes the RandR 1.2 ABI/API for drivers.
Only try to build Linux support on Linux. We should probably disable all
OS-dependent DDXes if we don't have a workable OS (and only build
Xephyr/Xfake), but that's future work.
If we're mapping something in the "legacy range" (0-1Mb), we shouldn't
expand the requested range to the entire 0-1Mb range. Typically this
is for mapping the VGA frame buffer, and some platforms support mmap of
the frame buffer but not the entire 0-1Mb range.
For example, HP sx1000 and sx2000 ia64 platforms can have memory from
0-0x9ffff, VGA frame buffer from 0xa0000-0xbffff, and memory from
0xc0000-0xfffff. On these platforms, we can't map the entire 0-1Mb
range with the same attribute because the memory only supports WB,
while the frame buffer supports only UC. But an mmap of just the
frame buffer should work fine.
Mach64 driver bails out on ia64 because it cannot map device
memory. It turns out that some bogus and unneeded code attempts
to find the root bridge of the device and fails to do so proberly
as there this host-to-pci bridge is not existant. This code has
been around for years although it completely unclear what it had
been intended for. Fixing this by eliminating the bogus code.