These were used by the non-standard glamor implementation in the intel
driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Remove these defines as we start to remove support for non-standard
glamor layering as used by the intel driver.
v2: Rebase on the blockhandler change and the Xephyr init failure
change (by anholt), fix stray NO_DRI3 addition to xwayland.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
GLAMOR_MEMORY_MAP was only used with GLAMOR_CREATE_PIXMAP_MAP, and
GLAMOR_CREATE_PIXMAP_MAP doesn't appear to be used anywhere, so just
remove both of them.
v2: Fix a stray whitespace bug that was introduced (change by anholt).
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Check for GL_EXT_unpack_subimage and GL_NV_pack_subimage to
check if GL_(UN)PACK_ROW_LENGTH is available. Set the offsets
manually to prevent calls to GL_(UN)PACK_SKIP_*.
v2: Check support for GL_NV_pack_subimage as suggested by Matt Turner.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This adds glamor into the block handler call chain
in the correct place.
This should fix interactions between glamor and drivers
requiring damage from glamor.
v2: okay don't consolidate, just leave things wierd for now
remove blcokhandler in screen close.
v3: block handler wrapping the right way.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Calling glamor_purge_fbo directly was incorrect for large pixmaps.
Fixes use-after free with large pixmaps:
==2029== Invalid write of size 8 ~
==2029== at 0x85F93AD: __xorg_list_del (list.h:184)
==2029== by 0x85F93AD: xorg_list_del (list.h:204)
==2029== by 0x85F93AD: glamor_fbo_expire (glamor_fbo.c:280)
==2029== by 0x85F95CA: glamor_pixmap_fbo_cache_put (glamor_fbo.c:159)
==2029== by 0x85D7AB5: glamor_destroy_textured_pixmap (glamor.c:228)
==2029== by 0xC1BDDC4: radeon_glamor_destroy_pixmap (radeon_glamor.c:272)
==2029== by 0x519D00: damageDestroyPixmap (damage.c:1473)
==2029== by 0x4DD307: XvDestroyPixmap (xvmain.c:370)
==2029== by 0x4DB975: ShmDestroyPixmap (shm.c:258)
==2029== by 0x5098F6: FreePicture (picture.c:1425)
==2029== by 0x85E678E: glamor_composite_clipped_region (glamor_render.c:1558)
==2029== by 0x85F763A: glamor_composite_largepixmap_region (glamor_largepixmap.c:1347)
==2029== by 0x85E7964: _glamor_composite (glamor_render.c:1679)
==2029== by 0x85E7A38: glamor_composite (glamor_render.c:1758)
==2029== Address 0x1141d3c0 is 0 bytes inside a block of size 64 free'd
==2029== at 0x4C29E90: free (vg_replace_malloc.c:473)
==2029== by 0x85D7167: glamor_set_pixmap_private (glamor.c:570)
==2029== by 0xC1BDDC4: radeon_glamor_destroy_pixmap (radeon_glamor.c:272)
==2029== by 0x519D00: damageDestroyPixmap (damage.c:1473)
==2029== by 0x4DD307: XvDestroyPixmap (xvmain.c:370)
==2029== by 0x4DB975: ShmDestroyPixmap (shm.c:258)
==2029== by 0x45B246: doFreeResource (resource.c:875)
==2029== by 0x45BD5E: FreeResource (resource.c:905)
==2029== by 0x43444B: ProcFreePixmap (dispatch.c:1422)
==2029== by 0x43856E: Dispatch (dispatch.c:432)
==2029== by 0x43C96F: dix_main (main.c:298)
==2029== by 0x6CFAB44: (below main) (libc-start.c:287)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The other way around fails to destroy the screen pixmap EGL image:
==1782== 80 (32 direct, 48 indirect) bytes in 1 blocks are definitely lost in loss record 981 of 2,171
==1782== at 0x4C28C20: malloc (vg_replace_malloc.c:296)
==1782== by 0xF9D4BD2: dri2_create_image_from_dri (egl_dri2.c:1264)
==1782== by 0xF9D4BD2: dri2_create_image_dma_buf (egl_dri2.c:1764)
==1782== by 0xF9D4BD2: dri2_create_image_khr (egl_dri2.c:1798)
==1782== by 0xF9C7937: eglCreateImageKHR (eglapi.c:1494)
==1782== by 0x85D5655: _glamor_egl_create_image (glamor_egl.c:134)
==1782== by 0x85D5655: glamor_egl_create_textured_pixmap (glamor_egl.c:302)
==1782== by 0x85D579B: glamor_egl_create_textured_screen (glamor_egl.c:225)
==1782== by 0xC1BE05D: radeon_glamor_create_screen_resources (radeon_glamor.c:67)
==1782== by 0xC1B6153: RADEONCreateScreenResources_KMS (radeon_kms.c:258)
==1782== by 0x4B2105: xf86CrtcCreateScreenResources (xf86Crtc.c:709)
==1782== by 0x43C823: dix_main (main.c:223)
==1782== by 0x6CFAB44: (below main) (libc-start.c:287)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For robustness against drivers which may call both
glamor_(egl_)destroy_textured_pixmap and glamor_destroy_pixmap.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
==25551== Invalid read of size 8
==25551== at 0x85D5F2C: glamor_egl_destroy_pixmap_image (glamor_egl.c:527)
==25551== by 0x85D7750: glamor_destroy_pixmap (glamor.c:235)
==25551== by 0xC1BDD9B: radeon_glamor_destroy_pixmap (radeon_glamor.c:278)
==25551== by 0x5098F6: FreePicture (picture.c:1425)
==25551== by 0x85DD7A9: glamor_unrealize_glyph_caches (glamor_glyphs.c:257)
==25551== by 0x85D7B50: glamor_close_screen (glamor.c:586)
==25551== by 0x4B1A82: xf86CrtcCloseScreen (xf86Crtc.c:734)
==25551== by 0x4CFFC7: CursorCloseScreen (cursor.c:187)
==25551== by 0x513A44: AnimCurCloseScreen (animcur.c:106)
==25551== by 0x51529B: present_close_screen (present_screen.c:64)
==25551== by 0x43CA83: dix_main (main.c:351)
==25551== by 0x6CFAB44: (below main) (libc-start.c:287)
==25551== Address 0x83dafa0 is 96 bytes inside a block of size 152 free'd
==25551== at 0x4C29E90: free (vg_replace_malloc.c:473)
==25551== by 0x85D76B4: glamor_destroy_textured_pixmap (glamor.c:225)
==25551== by 0x85D7750: glamor_destroy_pixmap (glamor.c:235)
==25551== by 0xC1BDD9B: radeon_glamor_destroy_pixmap (radeon_glamor.c:278)
==25551== by 0x5098F6: FreePicture (picture.c:1425)
==25551== by 0x85DD7A9: glamor_unrealize_glyph_caches (glamor_glyphs.c:257)
==25551== by 0x85D7B50: glamor_close_screen (glamor.c:586)
==25551== by 0x4B1A82: xf86CrtcCloseScreen (xf86Crtc.c:734)
==25551== by 0x4CFFC7: CursorCloseScreen (cursor.c:187)
==25551== by 0x513A44: AnimCurCloseScreen (animcur.c:106)
==25551== by 0x51529B: present_close_screen (present_screen.c:64)
==25551== by 0x43CA83: dix_main (main.c:351)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
They are part of the ABI.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were three paths that called eglDestroyImageKHR:
* The front buffer
* The intel driver's flip buffer
* pixmaps under DRI3
This patch unifies the second two by having glamor_destroy_pixmap
always destroy any associaged EGL image. This allows us to stop
storing the back_pixmap pointer in glamor as that was only used to
make sure that buffer was freed at server reset time.
v2: check for valid pixmap_priv before using it in
glamor_egl_destroy_pixmap_image
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Mark fbos created from external buffers so that when the associated
pixmap is destroyed, they aren't put into the fbo cache for later
re-use and are instead freed immediately.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
I can't find any performance benefit to using the GL path and the code
renders this trapezoid incorrectly:
top: FIXED 29.50
bottom: FIXED 30.00
left top: POINT 0.00, 29.50
left bottom: POINT 0.00, 30.50
right top: POINT -127.50, 29.50
right bottom: POINT 52.50, 30.00
This should render a solid line from 0,30 to 52,30 but draws nothing.
The code also uses an area computation for trapezoid coverage which
does not conform to the Render specification which requires a specific
point sampling technique.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The comment above glamor_glyphs_init was already saying so.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This hooks up SHM sync fences to complete the requirements for DRI3
running on Glamor.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
It's unused since keithp's copy acceleration code completely replaced
glamor_copyarea.c and removed the blit path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
All users of glamor had the same value set, and it complicated things
for no reason.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The core rendering paths all use the glamor_program fill functions now
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This provides glamor_solid_boxes and glamor_solid using regular GC
operations instead of calling directly to underlying rendering
functions. This will allow the old rendering code to be removed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This makes sure the pixelization for dashed lines matches non-dashed
lines, while also speeding them up.
v2: Switch to glamor_make_current
v3: Create dash pattern pixmap without GLAMOR_CREATE_FBO_NO_FBO
v4: Adopt suggestions from Eric's review:
- Drops power-of-two alignment of our line vertex data, simplifying
the code.
- Stops reading from the VBO. While on keithp's and my machines the
VBO is mapped cached, on many implementations it will be mapped WC,
making those reads extremely expensive.
- Style fixes (line wrapping, spaces around operators).
v5: Adopt suggestions from Markus' review:
- Use max when computing zero-width dashed line length.
Don't open code max here.
- Embed CoordModePrevious into VBO writing for dashed lines
Instead of pre-computing the coord mode previous results, just
embed this in the loop which fills the vertex buffer. Saves
re-writing the request buffer, and shortens the code a bit
v6: Export glamor_destroy_gc for UXA
UXA needs to call glamor_destroy_gc from its GCFuncs, so export
it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Paints with textures, using a temporary buffer for overlapping copies
Performs CPU to GPU transfers for pixmaps in memory. Accelerates copy
plane when both objects are in the GPU. Includes copy_window
acceleration too.
v2: Use NV_texture_barrier for non-overlapping copies within the same
drawable
v3: Switch to glamor_make_current
v4: Do overlap check on the bounding box of the region rather than
on individual boxes
v5: Use Eric Anholt's re-written comments which provide a more accurate
description of the code
v6: Use floating point uniform for copy plane bit multiplier. This
avoids an int to float conversion in the copy plane fragment shader.
Use round() instead of adding 0.5 in copy plane. round() and +0.5
end up generating equivalent code, and performance measurements
confirm that they are the same speed. Round() is a bit clearer
though, so we'll use it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
There's no reason to use a pointer here, it just wastes time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
These offer a simpler and more efficient means for temporarily
transitioning to CPU-accessible memory for fallback implementations.
v2: Do not attempt fallbacks with GLAMOR_DRM_ONLY pixmaps
glamor cannot transfer pixels for GLAMOR_DRM_ONLY pixmaps using
glReadPixels and glTexSubImage2D, and so there's no way to perform
fallback operations with these pixmaps.
v3: Clear ->pbo field when deleting the PBO. Otherwise, we'd reuse
the old name next time we fall back on the pixmap, which would
potentially conflict with some other pixmap that genned a new
name, or just do a lazy allocation of the name (compat GL context,
like we currently use) or error out (core GL context, like we hope
to use some day). Also, style fixes. Changes by anholt, acked by
keithp.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The max size of renderbuffers and texture often match by accident, but
as we always use textures, we should check for the right flag. Also
check for viewport size as this may be lower and we want to render to
almost every pixmap.
Signed-off-by: Markus Wick <markus@selfnet.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Even when create a pixmap which smaller than the max_fbo_size,
it may fail due to some low level driver limitation. If that is
the case, we don't need to crash the xserver. We just need to
fallback to system memory.
See the related bug at:
https://bugs.freedesktop.org/show_bug.cgi?id=71190
Signed-off-by: Zhigang Gong <zhigang.gong@intel.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Kai Wasserbach <kai@dev.carbon-project.org>
Tested-by: Erich Seifert <eseifert@error-reports.org>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
These use the upload_boxes and download_boxes helpers to provide
reasonably efficient image transfer.
Fixes segfaults in Xephyr with x11perf -reps 1.
Performance improvements:
Improves -putimage10 by 548.218% +/- 88.601% (n=10).
Improves -putimage500 by 3.71014% +/- 1.5049% (n=10).
Improves -getimage10 by 8.37004% +/- 4.58274% (n=10).
No statistically significant difference on -getimage500 (n=10).
v2: Fix rebase failures, don't forget to check/prepare the gc in
putimage fallbacks (changes by anholt).
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that we have the DIX global state for the current context, we
don't need to track nesting to try to reduce MakeCurrent overhead.
v2: Fix a mistaken replacement of a put_context with make_current in
glamor_fill_spans_gl() (caught by keithp).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com> (v1)
Accelerates text painting with GPU-based geometry computation and stippling
v2: Simplify get_glyphs, expand single character variable names to
more descriptive ones. (Markus Wick)
v3: Rebase against the glamor_prepare_* un-renaming (changes by anholt).
Improves x11perf -f8text by 417.908% +/- 11.0144% (n=10)
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This currently computes the GLSL version in a fairly naïve fashion,
and leaves that in the screen private for other users. This will let
us update the version computation in one place later on.
v2: Drop an accidental rebase-squashed hunk (change by anholt).
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The glamor_init calls to glamor_init_xv_shader were never getting run
because GLAMOR_XV was never defined. Instead of trying to make that
work, fix glamor_xv_init to make the call instead.
Further, just get rid of the glamor_fini_xv_shader function entirely
as the shader program will be destroyed when the context is destroyed
at server reset time.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Move the configuration of screen->SetWindowPixmap out from under it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This flag lets a DDX allocate a glamor pixmap without allocating the
texture that backs it. The DDX can then allocate the texture itself
and then set it later.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This lets code treat the one-fbo pixmaps more symmetrically with the
tiled pixmaps.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Glamor has a mode where pixmaps will be constructed from numerous
small FBOs. This allows testing of the tiled pixmap code without
needing to create huge pixmaps.
However, the render glyph code assumed that it could create a pixmap
large enough for the glyph atlas. Instead of attempting to fix that
(which would be disruptive and not helpful), I've added a new pixmap
creation usage, GLAMOR_CREATE_NO_LARGE which forces allocation of a
single large FBO.
Now that we have pixmaps with varying FBO sizes, I then went around
and fixed the few places using the global FBO max size and replaced
that with the per-pixmap FBO tiling sizes, which were already present
in each large pixmap.
Xephyr has been changed to pass GLAMOR_CREATE_NO_LARGE when it creates
the screen pixmap as it doesn't want to deal with tiling either.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The mbr path was hard coded enabled for desktop gl and disabled for
gles. But there are both desktop without mbr and GLES with mbr.
v2: Don't forget to update the fini path, too (change by anholt)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
We will never ever run on OpenGL 1.2 as we use shaders everywhere.
2.0 may be enough, but we also often use PBOs and our big shaders
won't fit into the first GLSL limits.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
It wasn't assigned yet when it was tested for GLAMOR_NO_DRI3.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will help tools like fips, apitrace, or INTEL_DEBUG=shader_time
provide useful information about the shaders in use.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Just like for a caller of glamor_dri3_fd_from_pixmap(), otherwise the
consumer of that named buffer has no idea what GL chose for the
stride.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
This hasn't actually been a problem, since the server hasn't allocated
any glyphs before our glyph private initialization during
CreateScreenResources. But it's generally not X Server style to do
things this way.
Now that glamor itself drives both parts of glyphs setup, DDX drivers
no longer need to tell glamor to initialize glyphs. We do retain the
old public symbol so they can keep running with no changes.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
v2:
- Make the default buffer size a #define. (by Markus Wick)
- Fix the return offset for mapping with buffer_storage. (oops!)
v3:
- Avoid GL error at first rendering from unmapping no buffer.
- Rebase on the glBindBuffer(GL_ARRAY_BUFFER, 0) change.
v4: Rebase on Markus's vbo init changes.
v5: Fix missing put_context() in the buffer_storage fallback path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
We should be uploading any vertex data using this kind of upload
style, since it saves a bunch of extra copies of our vertex data.
v2:
- Add a simple comment about what the function does.
- Use get_vbo_space()'s return in trapezoids, instead of dereffing
glamor_priv->vb (by Markus Wick).
- Fix the double-unmapping by moving put_vbo_space() outside of
flush_composite_rects().
- Remove the rest of the composite_vbo_offset usage, and just always
use get_vbo_space()'s return value.
v3:
- Fix failure to put_vbo_space in traps when no prims were
generated.
- Unbind the VBO from put_vbo_space(). Keeps callers from
forgetting to do so.
v4:
- Split out some changes into the previous 3 commits while trying to
track down a regression.
- Fix regression due to rebase fail where glamor_priv->vbo_offset
wasn't incremented.
v5:
- Fix GLES2 VBO sizing.
- Add a comment about resize behavior.
- Move glamor_vbo.c init code to glamor_vbo.c from
glamor_render.c. (Derived from Markus's changes, but the GLES2 fix
dropped almost all of the code in the functions).
v6:
- Drop the initial BufferData on GLES2 (it happens at put() time).
- Don't forget to set vbo_offset to the size on GLES2.
- Use char * instead of void * in the cast to return the vbo_offset.
- Resize the default FBO to 512kb, to be similar to previous
behavior. +1.66124% +/- 0.284223% (n=679) on aa10text.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
GLES2 Xephyr is failing due to lack of glMapBuffer() with the read
bits set, and I decided to see if we can just switch everything to
glMapBufferRange(). I'm undecided, and it largely depends on whether
we find people are interested in using glamor for the windows X server.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
There was confusion over whether they should have egl in the name, and
they had DRI3 in the name even though they're useful to have without
DRI3.
v2: Just rename glamor_name_from_pixmap for now -- I'd accidentally
conflict-resolved in adding new parameters from a later commit.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
