As PVR glsl compiler seems doesn't support external fragment
function, and fails at compile gradient shader. Disable it
for now. We may need to modify gradient shader to don't use
external function.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
If a pixmap doesn't have a private, then set its type to
GLAMOR_MEMORY, and thus it will get a valid private.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Introduced two function glamor_get_sub_pixmap/glamor_put_sub_pixmap,
can easily used to get and put sub region of a big textured pixmap.
And it can use pbo if possible.
To support download a big textured pixmap's sub region to another
pixmap's pbo, we introduce a new type of pixmap GLAMOR_MEMORY_MAP.
This type of pixmap has a valid devPrivate.ptr pointer, and that
pointer points to a pbo mapped address.
Now, we are ready to refine those
glamor_prepare_access/glamor_finish_access pairs.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
This patch fixed two major problems when we do the color convesion with
GLES2.
1. lack of necessary formats in FBO pool.
GLES2 has three different possible texture formats, GL_RGBA,
GL_BGRA and GL_ALPHA. Previous implementation only has one bucket
for all the three formats which may reuse a incorrect texture format
when do the cache lookup. After this fix, we can enable fbo safely
when running with GLES2.
2. Refine the format matching method in
glamor_get_tex_format_type_from_pictformat.
If both revertion and swap_rb are needed, for example use GL_RGBA
to represent PICT_b8g8r8a8. Then the downloading and uploading should
be handled differently.
The picture's format is PICT_b8g8r8a8,
Then the expecting color layout is as below (little endian):
0 1 2 3 : address
a r g b
Now the in GLES2 the supported color format is GL_RGBA, type is
GL_UNSIGNED_TYPE, then we need to shuffle the fragment
color as :
frag_color = sample(texture).argb;
before we use glReadPixel to get it back.
For the uploading process, the shuffle is a revert shuffle.
We still use GL_RGBA, GL_UNSIGNED_BYTE to upload the color
to a texture, then let's see
0 1 2 3 : address
a r g b : correct colors
R G B A : GL_RGBA with GL_UNSIGNED_BYTE
Now we need to shuffle again, the mapping rule is
r = G, g = B, b = A, a = R. Then the uploading shuffle is as
below:
frag_color = sample(texture).gbar;
After this commit, gles2 version can pass render check with all
the formats except those 1555/2101010.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Prepare for modification of gradient using shader. The
gradient pixmaps now is generated by pixman and we will
replace them with shader. Add structure fields and
dispatch functions which will be needed. Some auxiliary
macro for vertex convert.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
This commit added two APIs to support the DRI swap buffer.
one is glamor_egl_exchange_buffers() which can swap two
pixmaps' underlying KHRimages/fbos/texs. The DDX layer should
exchange the DRM bos to make them consistent to each other.
Another API is glamor_egl_create_textured_screen_ext(), which
extent one more parameters to track the DDX layer's back pixmap
pointer. This is for the triple buffer support. When using triple
buffer, the DDX layer will keep a back pixmap rather then the
front pixmap and the pixmap used by the DRI2 client. And during
the closing screen stage, we have to dereference all the back
pixmap's glamor resources. Thus we have to extent this API to
register it when create new screen.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Renaming glamor_priv->dispatch and wrapping the access to
the dispatch table with a function that also ensured the
context was bound.
dispatch = glamor_get_dispatch(glamor_priv);
...
glamor_put_dispatch(glamor_priv);
So that we catch all places where we attempt to call into GL withouta
context. As an optimisation we can then do glamor_get_context();
glamor_put_context() around the rendering entry points to reduce the
frequency of having to restore the old context. (Along with allowing
the context to be recursively acquired and making the old context part of
the glamor_egl state.)
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
If we are using MESA as our GL library, then both xserver's
GLX and glamor are link to the same library. As xserver's
GLX has its own _glapi_get/set_context/dispatch etc, and it
is a simplified version derived from mesa thus is not
sufficient for mesa/egl's dri loader which is used by glamor.
Then if glx module is loaded before glamoregl module, the
initialization of mesa/egl/opengl will not be correct, and
will fail at a very early stage, most likely fail to map
the element buffer.
Two methodis to fix this problem, first is to modify the xserver's
glx's glapi.c to fit mesa's requirement. The second is to put
a glamor.conf as below, to the system's xorg.conf path.
Section "Module"
Load "glamoregl"
EndSection
Then glamor will be loaded firstly, and the mesa's libglapi.so
will be used. As current xserver's dispatch table is the same
as mesa's, then the glx's dri loader can work without problem.
We took the second method as it don't need any change to xorg.:)
Although this is not a graceful implementation as it depends
on the xserver's dispatch table and the mesa's dispatch table
is the same and the context set and get is using the same method.
Anyway it works.
As by default, xserver will enable GLX_USE_TLS. But mesa will not
enable it, you may need to enable that when build mesa.
Three pre-requirements to make this glamor version work:
0. Make sure xserver has commit 66e603, if not please pull the latest
master branch.
1. Rebuild mesa by enable GLX_USE_TLS.
2. Put the glamor.conf to your system's xorg.conf path and make sure
it loaded prior to glx module.
Preliminary testing shows indirect glxgears works fine.
If user want to use GLES2 for glamor by using MESA, GLX will not
work correctly.
If you are not using normal MESA, for example PVR's private GLES
implementation, then it should be ok to use GLES2 glamor and the
GLX should work as expected. In this commit, I use gbm to check
whether we are using MESA or non-mesa. Maybe not the best way.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
We may change the way to set/get those private data latter.
consolidate to glamor_set_pixmap/screen_private is better
than call those dixSetPrivate directly.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
This commit move the calling to glamor_close_screen from
glamor_egl_free_screen to glamor_egl_close_screen, as this
is the right place to do this.
We should detach screen fbo and destroy the corresponding
KHR image at glamor_egl_close_screen stage. As latter
DDX driver will call DestroyPixmap to destroy screen pixmap,
if the fbo and image are still there but glamor screen private
data pointer has been freed, then it causes segfault.
This commit also introduces a new flag GLAMOR_USE_EGL_SCREEN.
if DDX driver is using EGL layer then should set this bit
when call to glamor_init and then both glamor_close_screen
and glamor_egl_close_screen will be registered correctly,
DDX layer will not need to call these two functions manually.
This way is also the preferred method within Xorg domain.
As interfaces changed, bump the version to 0.3.0.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Tested-by: Peng Li <peng.li@intel.com>
Concentrate checking the size/depth when creating fbo. Simply
the pixmap creation and the uploading fbo/texture preparing.
Also slightly change the uploading fbo's preparation. If don't
need fbo, then a fbo only has valid texture should be enough
to return.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Fixup three special cases, one is in tile and the other is in
composite. Both cases are due to repeat texture issue. Maybe
we can refine the shader to recalculate texture coords to
support partial texture's repeating.
The third is when upload a memory pixmap to texture, as now
the texture may not have the exact size as the pixmap, we
should not use the full rect coords.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
We classify the cache according to the texture's format/width/height.
As openGL doesn't allow us to change a texture's format/width/height
after the internal texture object is already allocated, we can't
just calculate the size and then according ths size to put the
fbo to an bucket which is just like SNA does. We can only put
the fbo to the corresponding format/width/height bucket.
This commit only support the exact size match. The following patch
will remove this restriction, just need to handle the repeat/tile
case when the size is not exactly match.
Should use fls instead of ffs when decide the width/height bucket,
thanks for Chris to point this out.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
This is the first patch to implement a fbo/tex pool mechanism which
is like the sna's BO cache list. We firstly need to decopule the
fbo/tex from each pixmap. The new glamor_pixmap_fbo data
structure is for that purpose. It's somehow independent to each
pixmap and can be reused latter by other pixmaps once it's detached
from the current pixmap.
And this commit also slightly change the way to create a
memory pixmap. We will not create a pixmap private data structure
by default, instead we will crete that structure when a memory
pixmap is attaching a fbo to it.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As after we got a texture, no matter the texture is created
on the glamor_create_pixmap or on the egl layer, we all already
know the texture's width and height there. We don't need
to pass them in.
This commit also simply the glamor_egl_create_textured_screen to
reuse the egl_create_textured_pixmap. And also remove the useless
root image from the egl private structure. As now the root image
is bound to the screen image, we don't take care it separately
here. It will be freed at the screen closing.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As we want to support DRI2 drawable which may create a new textured_drm
to a pre-existing texture_only pixmap, we have to add this logical.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Tested-by: He Junyan<junyan.he@linux.intel.com>
Just in case when wrongly fallback to DDX layer and cause
random memory corruption. Pointed out by Chris.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
This commit exports all the rest rendering/drawing functions
to the DDX drivers. And introduce some new pixmap type. For
a pixmap which has a separated texture, we never fallback
it to the DDX layer.
This commit also adds the following new functions:
glamor_composite_rects, glamor_get_image_nf which are needed
by UXA framework. Just a simple wrapper function of miXXX.
Will consider to optimize them next few weeks.
This commit also Fixed a glyphs rendering bug pointed by Chris.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
During the integration with intel driver, we introduce two
new type of pixmap, one is TEXTURE_DRM, the other is DRM_ONLY.
TEXTURE_DRM means we create a texture bind to the DRM buffer
successfully. And then the texture and the external BO is
consistent. DRM_ONLY means that we failed to create a texture
from the external DRM BO. We need to handle those different
types carefully, so we have to track them in the data structure.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
When glamor is rendering pixmaps, and needs to create some
temporary pixmap, it's better to use glamor version create
pixmap directly. As if goes to external DDX's create pixmap,
it may create a external DRM buffer which is not necessary.
All the case within glamor scope is to create a texture only
pixmap or a in memory pixmap.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
When create a piccture, we need to attach a pixmap to it.
A pixmap only has a depth, which is not sufficant for glamor.
As in openGL texture only has a few internal formats which
is not sufficant to represent all the possible picture
format. So we always transform the picture format to GL_RGBA.
And when we need to read back the picture, we must know the
original picture format. So we have to override create
and destroy picture to track a pixmap's real picture format
if it is attached to a picture.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
The previous implementation is to override the CreatePixmap
firstly and assume the first call to CreatePixmap must be
screen pixmap. This is not clean. Now Refine it to normal
way. Let the Xephyr to set texture 0 to screen pixmap
during creating screen resources.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Create a new structure glamor_gl_dispatch to hold all the
gl function's pointer and initialize them at run time ,
rather than use them directly. To do this is to avoid
symbol conflicts.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As in glamor_glyphs_init, we may need to create pixmap. Thus it must
be called after the pixmap resources allocation. Just move it to
screen resource creation stage is good enough for mow.
Also introduce a macro GLAMOR_FOR_XORG to glamor.h. As glamor may
be used by Xephyr which doesn't don't have those xorg header files
and also don't need the egl extension.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
As some platform doesn't support to use ALPHA8 texture as
draw target, we have to disable it. It seems there is no
easy way to check that.
Signed-off-by: Zhigang Gong <zhigang.gong@gmail.com>
Glamor doesn't need to use GLEW. We can parse the extension by
ourself. This patch also fix the fbo size checking from a hard
coded style to a dynamic checking style.
Signed-off-by: Zhigang Gong <zhigang.gong@gmail.com>
ES2.0 doesn't support QUADS and also doesn't support
some EXT APIs. Fix some of them in this commit.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Xephyr doesn't has a bounded valid texture. It seems that we can't
load texture 0 directly sometimes. Especially in the copyarea, function
if that is the case, we prefer to use fbo blit to read the screen pixmap
rather than load the bound texture.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
When we need to solid fill an entire pixmap with a specific color,
we do not need to draw it immediately. We can defer it to the
following occasions:
1. The pixmap will be used as source, then we can just use a shader
to instead of one copyarea.
2. The pixmap will be used as target, then we can do the filling
just before drawing new pixel onto it. The filling and drawing
will have the same target texture, we can save one time of
fbo context switching.
Actually, for the 2nd case, we have opportunity to further optimize
it. We can just fill the untouched region.
By applying this patch, the cairo-trace for the firefox-planet-gnome's
rendering time decrease to 14seconds from 16 seconds.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Some special case we want to get a cpu memory pixmap. For example
to gather a large cpu memory pixmap's block to a small pixmap.
Add pixmap's priviate data's deallocation when destroy a pixmap.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Access mapped vbo address is too slow. And by use system memory
directly, rgb10text/aa10text increases from 980K/1160K to 117K/140K.
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
When calling from ephyr, we forgot to initialize it to the correct
value. Will cause segfault when run Xephyr.
Signed-off-by: Zhigang Gong <zhigang.gong@gmail.com>