We don't care that much about startup time to write different code paths...
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
The mbr path was hard coded enabled for desktop gl and disabled for
gles. But there are both desktop without mbr and GLES with mbr.
v2: Don't forget to update the fini path, too (change by anholt)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
We will never ever run on OpenGL 1.2 as we use shaders everywhere.
2.0 may be enough, but we also often use PBOs and our big shaders
won't fit into the first GLSL limits.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
It wasn't assigned yet when it was tested for GLAMOR_NO_DRI3.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
We don't use fixed function rendering, so there is no need to reset
the program at all. This lets the driver avoid checking for state
changes between draw calls when we rebind the same program.
Improves xephyr x11perf -f8text performance by 6.03062% +/- 1.64928%
(n=20)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This block was disabled since 2011, so there is likely no need to keep it any more.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Flagged by cppcheck 1.64:
[glamor/glamor_gradient.c:987] -> [glamor/glamor_gradient.c:991]:
(performance) Variable 'repeat_type_uniform_location' is
reassigned a value before the old one has been used.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
This will help tools like fips, apitrace, or INTEL_DEBUG=shader_time
provide useful information about the shaders in use.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
From the GL_ARB_vertex_buffer_object spec:
After the client has specified the contents of a mapped data store,
and before the data in that store are dereferenced by any GL commands,
the mapping must be relinquished by calling
boolean UnmapBufferARB(enum target);
Our mappings were only getting reaped at PBO destroy time, after the
upload. If the GL implementation wasn't coherent, it would have used
stale data to do the texture upload.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
If the lines aren't solid-filled vert/horiz solid-filled rectangles,
we fall back. libreoffice has some diagonal lines, and the
performance of the fallback path was atrocious. Just fall back to
mi's spans instead, so that we don't do an upload/download.
Improves x11perf -seg100 by 863.652% +/- 9.8968% (n=5)
Signed-off-by: Eric Anholt <eric@anholt.net>
Using the same idea as the previous PushPixels code, just make points
for each point in the glyph. This is an advantage over the pushpixels
fallback because we can batch the BO mappings and draw calls across
glyphs.
Improves performance of x11perf -f8text by 773.389% +/- 3.50754% (n=10).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Otherwise, mi will fall back to GetSpans()ing the bitmap, walking the
bitmap, computing spans to be filled, and calling FillSpans().
Improves x11perf -f8text by 759.373% +/- 3.33096% (n=166)
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
We had regressions in CopyPlane reported by xts5, because we were
(successfully!) dereferencing the null pixmap->devPrivate.ptr for a
tile or stipple without having done a prepare.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Now that the core deals with that for us, we can avoid all this extra
carefulness.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
The common pattern is to do nested if statements making calls to
prepare_access() and then pop those mappings back off in each set of
braces. Some cases checked for src == dst to avoid leaking mappings,
but others didn't. Others didn't even do the nested mappings, so a
failure in the outer map would result in trying to umap the inner and
failing.
By allowing nested mappings, we can fix both problems by not requiring
the care from the caller, plus we can allow a simpler nesting of all
the prepares in one if statement.
v2: Add a comment about nested unmap behavior, and just reuse the
glamor_access_t enum.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Nothing was using it, and it was going to complicate the
glamor_prepare_access bugfixing I'm going to do next.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
The old Xephyr codebase was using the GL window system framebuffer for
the screen pixmap, but that meant you couldn't texture from it to do
operations sourcing from the screen, so in the version that landed I
instead had the screen just be a plain texture.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This unpacks the bitfield into an int size, but my experience has been
that packing bitfields doesn't matter for performance.
v2: Convert more comparisons against numbers or implicit bool
comparisons to comparisons against the enum names, and fix up some
comments.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Now the error path of allocation is more obvious: We leave things in
the a-few-boxes-at-a-time stack memory state.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
The "valid_" prefix was used above to describe our allocation that
gets reused multiple times, which is totally unrelated.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Imagine a nbox that was (UINT_MAX + small number) / (4 * 2 *
sizeof(float)). We'd malloc a few bytes after the integer overflow,
but glamor_set_normalize_vcoords would write over gigabytes of heap.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
ARRAY_SIZE(vertices) is 32 (floating point values), so we need to
divide by the number of floats in a box like we do in the overflow
case below.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
No change in generated code size -- apparently the compiler figured it
out.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Just like for a caller of glamor_dri3_fd_from_pixmap(), otherwise the
consumer of that named buffer has no idea what GL chose for the
stride.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
The flag is already being set at glamor_egl_screen_init() time, so no
need for the driver to separately call this. That said, leave the
function around to keep the ABI compatibility.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
This hasn't actually been a problem, since the server hasn't allocated
any glyphs before our glyph private initialization during
CreateScreenResources. But it's generally not X Server style to do
things this way.
Now that glamor itself drives both parts of glyphs setup, DDX drivers
no longer need to tell glamor to initialize glyphs. We do retain the
old public symbol so they can keep running with no changes.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
There's no reason to hide EGL from the rest of glamor, now that we
have epoxy.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
The theory here was that it (which I copied from EGL) existed to fix
up context switching with indirect GLX. But indirect GLX won't even
try to set the context again unless its lastContext field is cleared,
so we need to solve this a different way.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
v2:
- Make the default buffer size a #define. (by Markus Wick)
- Fix the return offset for mapping with buffer_storage. (oops!)
v3:
- Avoid GL error at first rendering from unmapping no buffer.
- Rebase on the glBindBuffer(GL_ARRAY_BUFFER, 0) change.
v4: Rebase on Markus's vbo init changes.
v5: Fix missing put_context() in the buffer_storage fallback path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
The argument to setup_composte_vbo is the number of verts.
v2: Drop the now-unused vert_stride value.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
We should be uploading any vertex data using this kind of upload
style, since it saves a bunch of extra copies of our vertex data.
v2:
- Add a simple comment about what the function does.
- Use get_vbo_space()'s return in trapezoids, instead of dereffing
glamor_priv->vb (by Markus Wick).
- Fix the double-unmapping by moving put_vbo_space() outside of
flush_composite_rects().
- Remove the rest of the composite_vbo_offset usage, and just always
use get_vbo_space()'s return value.
v3:
- Fix failure to put_vbo_space in traps when no prims were
generated.
- Unbind the VBO from put_vbo_space(). Keeps callers from
forgetting to do so.
v4:
- Split out some changes into the previous 3 commits while trying to
track down a regression.
- Fix regression due to rebase fail where glamor_priv->vbo_offset
wasn't incremented.
v5:
- Fix GLES2 VBO sizing.
- Add a comment about resize behavior.
- Move glamor_vbo.c init code to glamor_vbo.c from
glamor_render.c. (Derived from Markus's changes, but the GLES2 fix
dropped almost all of the code in the functions).
v6:
- Drop the initial BufferData on GLES2 (it happens at put() time).
- Don't forget to set vbo_offset to the size on GLES2.
- Use char * instead of void * in the cast to return the vbo_offset.
- Resize the default FBO to 512kb, to be similar to previous
behavior. +1.66124% +/- 0.284223% (n=679) on aa10text.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
I want to extract the VBO mapping code, and as part of that I need to
get the global vbo_offset munging to stop.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
It's only used in the nonantialiased, triangle-based trapezoids path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
We don't need any current contents of the buffer, and this allows an
implementation to make a temporary BO for a streamed upload if it
wants to.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
We don't call GL in this function any more, so we can just drop the
get.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
GLES2 Xephyr is failing due to lack of glMapBuffer() with the read
bits set, and I decided to see if we can just switch everything to
glMapBufferRange(). I'm undecided, and it largely depends on whether
we find people are interested in using glamor for the windows X server.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus at selfnet.de>
